1 /* 2 * Copyright (c) 2018, Impinj, Inc. 3 * 4 * Designware PCIe IP block emulation 5 * 6 * This library is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU Lesser General Public 8 * License as published by the Free Software Foundation; either 9 * version 2.1 of the License, or (at your option) any later version. 10 * 11 * This library is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * Lesser General Public License for more details. 15 * 16 * You should have received a copy of the GNU Lesser General Public 17 * License along with this library; if not, see 18 * <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "qemu/osdep.h" 22 #include "qapi/error.h" 23 #include "qemu/module.h" 24 #include "qemu/log.h" 25 #include "hw/pci/msi.h" 26 #include "hw/pci/pci_bridge.h" 27 #include "hw/pci/pci_host.h" 28 #include "hw/pci/pcie_port.h" 29 #include "hw/qdev-properties.h" 30 #include "migration/vmstate.h" 31 #include "hw/irq.h" 32 #include "hw/pci-host/designware.h" 33 34 #define DESIGNWARE_PCIE_PORT_LINK_CONTROL 0x710 35 #define DESIGNWARE_PCIE_PHY_DEBUG_R1 0x72C 36 #define DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP BIT(4) 37 #define DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C 38 #define DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE BIT(17) 39 #define DESIGNWARE_PCIE_MSI_ADDR_LO 0x820 40 #define DESIGNWARE_PCIE_MSI_ADDR_HI 0x824 41 #define DESIGNWARE_PCIE_MSI_INTR0_ENABLE 0x828 42 #define DESIGNWARE_PCIE_MSI_INTR0_MASK 0x82C 43 #define DESIGNWARE_PCIE_MSI_INTR0_STATUS 0x830 44 #define DESIGNWARE_PCIE_ATU_VIEWPORT 0x900 45 #define DESIGNWARE_PCIE_ATU_REGION_INBOUND BIT(31) 46 #define DESIGNWARE_PCIE_ATU_CR1 0x904 47 #define DESIGNWARE_PCIE_ATU_TYPE_MEM (0x0 << 0) 48 #define DESIGNWARE_PCIE_ATU_CR2 0x908 49 #define DESIGNWARE_PCIE_ATU_ENABLE BIT(31) 50 #define DESIGNWARE_PCIE_ATU_LOWER_BASE 0x90C 51 #define DESIGNWARE_PCIE_ATU_UPPER_BASE 0x910 52 #define DESIGNWARE_PCIE_ATU_LIMIT 0x914 53 #define DESIGNWARE_PCIE_ATU_LOWER_TARGET 0x918 54 #define DESIGNWARE_PCIE_ATU_BUS(x) (((x) >> 24) & 0xff) 55 #define DESIGNWARE_PCIE_ATU_DEVFN(x) (((x) >> 16) & 0xff) 56 #define DESIGNWARE_PCIE_ATU_UPPER_TARGET 0x91C 57 58 #define DESIGNWARE_PCIE_IRQ_MSI 3 59 60 static DesignwarePCIEHost * 61 designware_pcie_root_to_host(DesignwarePCIERoot *root) 62 { 63 BusState *bus = qdev_get_parent_bus(DEVICE(root)); 64 return DESIGNWARE_PCIE_HOST(bus->parent); 65 } 66 67 static uint64_t designware_pcie_root_msi_read(void *opaque, hwaddr addr, 68 unsigned size) 69 { 70 /* 71 * Attempts to read from the MSI address are undefined in 72 * the PCI specifications. For this hardware, the datasheet 73 * specifies that a read from the magic address is simply not 74 * intercepted by the MSI controller, and will go out to the 75 * AHB/AXI bus like any other PCI-device-initiated DMA read. 76 * This is not trivial to implement in QEMU, so since 77 * well-behaved guests won't ever ask a PCI device to DMA from 78 * this address we just log the missing functionality. 79 */ 80 qemu_log_mask(LOG_UNIMP, "%s not implemented\n", __func__); 81 return 0; 82 } 83 84 static void designware_pcie_root_msi_write(void *opaque, hwaddr addr, 85 uint64_t val, unsigned len) 86 { 87 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(opaque); 88 DesignwarePCIEHost *host = designware_pcie_root_to_host(root); 89 90 root->msi.intr[0].status |= BIT(val) & root->msi.intr[0].enable; 91 92 if (root->msi.intr[0].status & ~root->msi.intr[0].mask) { 93 qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 1); 94 } 95 } 96 97 static const MemoryRegionOps designware_pci_host_msi_ops = { 98 .read = designware_pcie_root_msi_read, 99 .write = designware_pcie_root_msi_write, 100 .endianness = DEVICE_LITTLE_ENDIAN, 101 .valid = { 102 .min_access_size = 4, 103 .max_access_size = 4, 104 }, 105 }; 106 107 static void designware_pcie_root_update_msi_mapping(DesignwarePCIERoot *root) 108 109 { 110 MemoryRegion *mem = &root->msi.iomem; 111 const uint64_t base = root->msi.base; 112 const bool enable = root->msi.intr[0].enable; 113 114 memory_region_set_address(mem, base); 115 memory_region_set_enabled(mem, enable); 116 } 117 118 static DesignwarePCIEViewport * 119 designware_pcie_root_get_current_viewport(DesignwarePCIERoot *root) 120 { 121 const unsigned int idx = root->atu_viewport & 0xF; 122 const unsigned int dir = 123 !!(root->atu_viewport & DESIGNWARE_PCIE_ATU_REGION_INBOUND); 124 return &root->viewports[dir][idx]; 125 } 126 127 static uint32_t 128 designware_pcie_root_config_read(PCIDevice *d, uint32_t address, int len) 129 { 130 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d); 131 DesignwarePCIEViewport *viewport = 132 designware_pcie_root_get_current_viewport(root); 133 134 uint32_t val; 135 136 switch (address) { 137 case DESIGNWARE_PCIE_PORT_LINK_CONTROL: 138 /* 139 * Linux guest uses this register only to configure number of 140 * PCIE lane (which in our case is irrelevant) and doesn't 141 * really care about the value it reads from this register 142 */ 143 val = 0xDEADBEEF; 144 break; 145 146 case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL: 147 /* 148 * To make sure that any code in guest waiting for speed 149 * change does not time out we always report 150 * PORT_LOGIC_SPEED_CHANGE as set 151 */ 152 val = DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE; 153 break; 154 155 case DESIGNWARE_PCIE_MSI_ADDR_LO: 156 val = root->msi.base; 157 break; 158 159 case DESIGNWARE_PCIE_MSI_ADDR_HI: 160 val = root->msi.base >> 32; 161 break; 162 163 case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: 164 val = root->msi.intr[0].enable; 165 break; 166 167 case DESIGNWARE_PCIE_MSI_INTR0_MASK: 168 val = root->msi.intr[0].mask; 169 break; 170 171 case DESIGNWARE_PCIE_MSI_INTR0_STATUS: 172 val = root->msi.intr[0].status; 173 break; 174 175 case DESIGNWARE_PCIE_PHY_DEBUG_R1: 176 val = DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP; 177 break; 178 179 case DESIGNWARE_PCIE_ATU_VIEWPORT: 180 val = root->atu_viewport; 181 break; 182 183 case DESIGNWARE_PCIE_ATU_LOWER_BASE: 184 val = viewport->base; 185 break; 186 187 case DESIGNWARE_PCIE_ATU_UPPER_BASE: 188 val = viewport->base >> 32; 189 break; 190 191 case DESIGNWARE_PCIE_ATU_LOWER_TARGET: 192 val = viewport->target; 193 break; 194 195 case DESIGNWARE_PCIE_ATU_UPPER_TARGET: 196 val = viewport->target >> 32; 197 break; 198 199 case DESIGNWARE_PCIE_ATU_LIMIT: 200 val = viewport->limit; 201 break; 202 203 case DESIGNWARE_PCIE_ATU_CR1: 204 case DESIGNWARE_PCIE_ATU_CR2: 205 val = viewport->cr[(address - DESIGNWARE_PCIE_ATU_CR1) / 206 sizeof(uint32_t)]; 207 break; 208 209 default: 210 val = pci_default_read_config(d, address, len); 211 break; 212 } 213 214 return val; 215 } 216 217 static uint64_t designware_pcie_root_data_access(void *opaque, hwaddr addr, 218 uint64_t *val, unsigned len) 219 { 220 DesignwarePCIEViewport *viewport = opaque; 221 DesignwarePCIERoot *root = viewport->root; 222 223 const uint8_t busnum = DESIGNWARE_PCIE_ATU_BUS(viewport->target); 224 const uint8_t devfn = DESIGNWARE_PCIE_ATU_DEVFN(viewport->target); 225 PCIBus *pcibus = pci_get_bus(PCI_DEVICE(root)); 226 PCIDevice *pcidev = pci_find_device(pcibus, busnum, devfn); 227 228 if (pcidev) { 229 addr &= pci_config_size(pcidev) - 1; 230 231 if (val) { 232 pci_host_config_write_common(pcidev, addr, 233 pci_config_size(pcidev), 234 *val, len); 235 } else { 236 return pci_host_config_read_common(pcidev, addr, 237 pci_config_size(pcidev), 238 len); 239 } 240 } 241 242 return UINT64_MAX; 243 } 244 245 static uint64_t designware_pcie_root_data_read(void *opaque, hwaddr addr, 246 unsigned len) 247 { 248 return designware_pcie_root_data_access(opaque, addr, NULL, len); 249 } 250 251 static void designware_pcie_root_data_write(void *opaque, hwaddr addr, 252 uint64_t val, unsigned len) 253 { 254 designware_pcie_root_data_access(opaque, addr, &val, len); 255 } 256 257 static const MemoryRegionOps designware_pci_host_conf_ops = { 258 .read = designware_pcie_root_data_read, 259 .write = designware_pcie_root_data_write, 260 .endianness = DEVICE_LITTLE_ENDIAN, 261 .valid = { 262 .min_access_size = 1, 263 .max_access_size = 4, 264 }, 265 }; 266 267 static void designware_pcie_update_viewport(DesignwarePCIERoot *root, 268 DesignwarePCIEViewport *viewport) 269 { 270 const uint64_t target = viewport->target; 271 const uint64_t base = viewport->base; 272 const uint64_t size = (uint64_t)viewport->limit - base + 1; 273 const bool enabled = viewport->cr[1] & DESIGNWARE_PCIE_ATU_ENABLE; 274 275 MemoryRegion *current, *other; 276 277 if (viewport->cr[0] == DESIGNWARE_PCIE_ATU_TYPE_MEM) { 278 current = &viewport->mem; 279 other = &viewport->cfg; 280 memory_region_set_alias_offset(current, target); 281 } else { 282 current = &viewport->cfg; 283 other = &viewport->mem; 284 } 285 286 /* 287 * An outbound viewport can be reconfigure from being MEM to CFG, 288 * to account for that we disable the "other" memory region that 289 * becomes unused due to that fact. 290 */ 291 memory_region_set_enabled(other, false); 292 if (enabled) { 293 memory_region_set_size(current, size); 294 memory_region_set_address(current, base); 295 } 296 memory_region_set_enabled(current, enabled); 297 } 298 299 static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address, 300 uint32_t val, int len) 301 { 302 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d); 303 DesignwarePCIEHost *host = designware_pcie_root_to_host(root); 304 DesignwarePCIEViewport *viewport = 305 designware_pcie_root_get_current_viewport(root); 306 307 switch (address) { 308 case DESIGNWARE_PCIE_PORT_LINK_CONTROL: 309 case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL: 310 case DESIGNWARE_PCIE_PHY_DEBUG_R1: 311 /* No-op */ 312 break; 313 314 case DESIGNWARE_PCIE_MSI_ADDR_LO: 315 root->msi.base &= 0xFFFFFFFF00000000ULL; 316 root->msi.base |= val; 317 designware_pcie_root_update_msi_mapping(root); 318 break; 319 320 case DESIGNWARE_PCIE_MSI_ADDR_HI: 321 root->msi.base &= 0x00000000FFFFFFFFULL; 322 root->msi.base |= (uint64_t)val << 32; 323 designware_pcie_root_update_msi_mapping(root); 324 break; 325 326 case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: 327 root->msi.intr[0].enable = val; 328 designware_pcie_root_update_msi_mapping(root); 329 break; 330 331 case DESIGNWARE_PCIE_MSI_INTR0_MASK: 332 root->msi.intr[0].mask = val; 333 break; 334 335 case DESIGNWARE_PCIE_MSI_INTR0_STATUS: 336 root->msi.intr[0].status ^= val; 337 if (!root->msi.intr[0].status) { 338 qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 0); 339 } 340 break; 341 342 case DESIGNWARE_PCIE_ATU_VIEWPORT: 343 val &= DESIGNWARE_PCIE_ATU_REGION_INBOUND | 344 (DESIGNWARE_PCIE_NUM_VIEWPORTS - 1); 345 root->atu_viewport = val; 346 break; 347 348 case DESIGNWARE_PCIE_ATU_LOWER_BASE: 349 viewport->base &= 0xFFFFFFFF00000000ULL; 350 viewport->base |= val; 351 break; 352 353 case DESIGNWARE_PCIE_ATU_UPPER_BASE: 354 viewport->base &= 0x00000000FFFFFFFFULL; 355 viewport->base |= (uint64_t)val << 32; 356 break; 357 358 case DESIGNWARE_PCIE_ATU_LOWER_TARGET: 359 viewport->target &= 0xFFFFFFFF00000000ULL; 360 viewport->target |= val; 361 break; 362 363 case DESIGNWARE_PCIE_ATU_UPPER_TARGET: 364 viewport->target &= 0x00000000FFFFFFFFULL; 365 viewport->target |= val; 366 break; 367 368 case DESIGNWARE_PCIE_ATU_LIMIT: 369 viewport->limit = val; 370 break; 371 372 case DESIGNWARE_PCIE_ATU_CR1: 373 viewport->cr[0] = val; 374 break; 375 case DESIGNWARE_PCIE_ATU_CR2: 376 viewport->cr[1] = val; 377 designware_pcie_update_viewport(root, viewport); 378 break; 379 380 default: 381 pci_bridge_write_config(d, address, val, len); 382 break; 383 } 384 } 385 386 static char *designware_pcie_viewport_name(const char *direction, 387 unsigned int i, 388 const char *type) 389 { 390 return g_strdup_printf("PCI %s Viewport %u [%s]", 391 direction, i, type); 392 } 393 394 static void designware_pcie_root_realize(PCIDevice *dev, Error **errp) 395 { 396 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(dev); 397 DesignwarePCIEHost *host = designware_pcie_root_to_host(root); 398 MemoryRegion *host_mem = get_system_memory(); 399 MemoryRegion *address_space = &host->pci.memory; 400 PCIBridge *br = PCI_BRIDGE(dev); 401 DesignwarePCIEViewport *viewport; 402 /* 403 * Dummy values used for initial configuration of MemoryRegions 404 * that belong to a given viewport 405 */ 406 const hwaddr dummy_offset = 0; 407 const uint64_t dummy_size = 4; 408 size_t i; 409 410 br->bus_name = "dw-pcie"; 411 412 pci_set_word(dev->config + PCI_COMMAND, 413 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); 414 415 pci_config_set_interrupt_pin(dev->config, 1); 416 pci_bridge_initfn(dev, TYPE_PCIE_BUS); 417 418 pcie_port_init_reg(dev); 419 420 pcie_cap_init(dev, 0x70, PCI_EXP_TYPE_ROOT_PORT, 421 0, &error_fatal); 422 423 msi_nonbroken = true; 424 msi_init(dev, 0x50, 32, true, true, &error_fatal); 425 426 for (i = 0; i < DESIGNWARE_PCIE_NUM_VIEWPORTS; i++) { 427 MemoryRegion *source, *destination, *mem; 428 const char *direction; 429 char *name; 430 431 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][i]; 432 viewport->inbound = true; 433 viewport->base = 0x0000000000000000ULL; 434 viewport->target = 0x0000000000000000ULL; 435 viewport->limit = UINT32_MAX; 436 viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM; 437 438 source = &host->pci.address_space_root; 439 destination = host_mem; 440 direction = "Inbound"; 441 442 /* 443 * Configure MemoryRegion implementing PCI -> CPU memory 444 * access 445 */ 446 mem = &viewport->mem; 447 name = designware_pcie_viewport_name(direction, i, "MEM"); 448 memory_region_init_alias(mem, OBJECT(root), name, destination, 449 dummy_offset, dummy_size); 450 memory_region_add_subregion_overlap(source, dummy_offset, mem, -1); 451 memory_region_set_enabled(mem, false); 452 g_free(name); 453 454 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_OUTBOUND][i]; 455 viewport->root = root; 456 viewport->inbound = false; 457 viewport->base = 0x0000000000000000ULL; 458 viewport->target = 0x0000000000000000ULL; 459 viewport->limit = UINT32_MAX; 460 viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM; 461 462 destination = &host->pci.memory; 463 direction = "Outbound"; 464 source = host_mem; 465 466 /* 467 * Configure MemoryRegion implementing CPU -> PCI memory 468 * access 469 */ 470 mem = &viewport->mem; 471 name = designware_pcie_viewport_name(direction, i, "MEM"); 472 memory_region_init_alias(mem, OBJECT(root), name, destination, 473 dummy_offset, dummy_size); 474 memory_region_add_subregion(source, dummy_offset, mem); 475 memory_region_set_enabled(mem, false); 476 g_free(name); 477 478 /* 479 * Configure MemoryRegion implementing access to configuration 480 * space 481 */ 482 mem = &viewport->cfg; 483 name = designware_pcie_viewport_name(direction, i, "CFG"); 484 memory_region_init_io(&viewport->cfg, OBJECT(root), 485 &designware_pci_host_conf_ops, 486 viewport, name, dummy_size); 487 memory_region_add_subregion(source, dummy_offset, mem); 488 memory_region_set_enabled(mem, false); 489 g_free(name); 490 } 491 492 /* 493 * If no inbound iATU windows are configured, HW defaults to 494 * letting inbound TLPs to pass in. We emulate that by explicitly 495 * configuring first inbound window to cover all of target's 496 * address space. 497 * 498 * NOTE: This will not work correctly for the case when first 499 * configured inbound window is window 0 500 */ 501 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][0]; 502 viewport->cr[1] = DESIGNWARE_PCIE_ATU_ENABLE; 503 designware_pcie_update_viewport(root, viewport); 504 505 memory_region_init_io(&root->msi.iomem, OBJECT(root), 506 &designware_pci_host_msi_ops, 507 root, "pcie-msi", 0x4); 508 /* 509 * We initially place MSI interrupt I/O region at address 0 and 510 * disable it. It'll be later moved to correct offset and enabled 511 * in designware_pcie_root_update_msi_mapping() as a part of 512 * initialization done by guest OS 513 */ 514 memory_region_add_subregion(address_space, dummy_offset, &root->msi.iomem); 515 memory_region_set_enabled(&root->msi.iomem, false); 516 } 517 518 static void designware_pcie_set_irq(void *opaque, int irq_num, int level) 519 { 520 DesignwarePCIEHost *host = DESIGNWARE_PCIE_HOST(opaque); 521 522 qemu_set_irq(host->pci.irqs[irq_num], level); 523 } 524 525 static const char * 526 designware_pcie_host_root_bus_path(PCIHostState *host_bridge, PCIBus *rootbus) 527 { 528 return "0000:00"; 529 } 530 531 static const VMStateDescription vmstate_designware_pcie_msi_bank = { 532 .name = "designware-pcie-msi-bank", 533 .version_id = 1, 534 .minimum_version_id = 1, 535 .fields = (const VMStateField[]) { 536 VMSTATE_UINT32(enable, DesignwarePCIEMSIBank), 537 VMSTATE_UINT32(mask, DesignwarePCIEMSIBank), 538 VMSTATE_UINT32(status, DesignwarePCIEMSIBank), 539 VMSTATE_END_OF_LIST() 540 } 541 }; 542 543 static const VMStateDescription vmstate_designware_pcie_msi = { 544 .name = "designware-pcie-msi", 545 .version_id = 1, 546 .minimum_version_id = 1, 547 .fields = (const VMStateField[]) { 548 VMSTATE_UINT64(base, DesignwarePCIEMSI), 549 VMSTATE_STRUCT_ARRAY(intr, 550 DesignwarePCIEMSI, 551 DESIGNWARE_PCIE_NUM_MSI_BANKS, 552 1, 553 vmstate_designware_pcie_msi_bank, 554 DesignwarePCIEMSIBank), 555 VMSTATE_END_OF_LIST() 556 } 557 }; 558 559 static const VMStateDescription vmstate_designware_pcie_viewport = { 560 .name = "designware-pcie-viewport", 561 .version_id = 1, 562 .minimum_version_id = 1, 563 .fields = (const VMStateField[]) { 564 VMSTATE_UINT64(base, DesignwarePCIEViewport), 565 VMSTATE_UINT64(target, DesignwarePCIEViewport), 566 VMSTATE_UINT32(limit, DesignwarePCIEViewport), 567 VMSTATE_UINT32_ARRAY(cr, DesignwarePCIEViewport, 2), 568 VMSTATE_END_OF_LIST() 569 } 570 }; 571 572 static const VMStateDescription vmstate_designware_pcie_root = { 573 .name = "designware-pcie-root", 574 .version_id = 1, 575 .minimum_version_id = 1, 576 .fields = (const VMStateField[]) { 577 VMSTATE_PCI_DEVICE(parent_obj, PCIBridge), 578 VMSTATE_UINT32(atu_viewport, DesignwarePCIERoot), 579 VMSTATE_STRUCT_2DARRAY(viewports, 580 DesignwarePCIERoot, 581 2, 582 DESIGNWARE_PCIE_NUM_VIEWPORTS, 583 1, 584 vmstate_designware_pcie_viewport, 585 DesignwarePCIEViewport), 586 VMSTATE_STRUCT(msi, 587 DesignwarePCIERoot, 588 1, 589 vmstate_designware_pcie_msi, 590 DesignwarePCIEMSI), 591 VMSTATE_END_OF_LIST() 592 } 593 }; 594 595 static void designware_pcie_root_class_init(ObjectClass *klass, void *data) 596 { 597 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 598 DeviceClass *dc = DEVICE_CLASS(klass); 599 600 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 601 602 k->vendor_id = PCI_VENDOR_ID_SYNOPSYS; 603 k->device_id = 0xABCD; 604 k->revision = 0; 605 k->class_id = PCI_CLASS_BRIDGE_PCI; 606 k->exit = pci_bridge_exitfn; 607 k->realize = designware_pcie_root_realize; 608 k->config_read = designware_pcie_root_config_read; 609 k->config_write = designware_pcie_root_config_write; 610 611 device_class_set_legacy_reset(dc, pci_bridge_reset); 612 /* 613 * PCI-facing part of the host bridge, not usable without the 614 * host-facing part, which can't be device_add'ed, yet. 615 */ 616 dc->user_creatable = false; 617 dc->vmsd = &vmstate_designware_pcie_root; 618 } 619 620 static uint64_t designware_pcie_host_mmio_read(void *opaque, hwaddr addr, 621 unsigned int size) 622 { 623 PCIHostState *pci = PCI_HOST_BRIDGE(opaque); 624 PCIDevice *device = pci_find_device(pci->bus, 0, 0); 625 626 return pci_host_config_read_common(device, 627 addr, 628 pci_config_size(device), 629 size); 630 } 631 632 static void designware_pcie_host_mmio_write(void *opaque, hwaddr addr, 633 uint64_t val, unsigned int size) 634 { 635 PCIHostState *pci = PCI_HOST_BRIDGE(opaque); 636 PCIDevice *device = pci_find_device(pci->bus, 0, 0); 637 638 return pci_host_config_write_common(device, 639 addr, 640 pci_config_size(device), 641 val, size); 642 } 643 644 static const MemoryRegionOps designware_pci_mmio_ops = { 645 .read = designware_pcie_host_mmio_read, 646 .write = designware_pcie_host_mmio_write, 647 .endianness = DEVICE_LITTLE_ENDIAN, 648 .impl = { 649 /* 650 * Our device would not work correctly if the guest was doing 651 * unaligned access. This might not be a limitation on the real 652 * device but in practice there is no reason for a guest to access 653 * this device unaligned. 654 */ 655 .min_access_size = 4, 656 .max_access_size = 4, 657 .unaligned = false, 658 }, 659 }; 660 661 static AddressSpace *designware_pcie_host_set_iommu(PCIBus *bus, void *opaque, 662 int devfn) 663 { 664 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(opaque); 665 666 return &s->pci.address_space; 667 } 668 669 static const PCIIOMMUOps designware_iommu_ops = { 670 .get_address_space = designware_pcie_host_set_iommu, 671 }; 672 673 static void designware_pcie_host_realize(DeviceState *dev, Error **errp) 674 { 675 PCIHostState *pci = PCI_HOST_BRIDGE(dev); 676 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(dev); 677 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 678 size_t i; 679 680 for (i = 0; i < ARRAY_SIZE(s->pci.irqs); i++) { 681 sysbus_init_irq(sbd, &s->pci.irqs[i]); 682 } 683 684 memory_region_init_io(&s->mmio, 685 OBJECT(s), 686 &designware_pci_mmio_ops, 687 s, 688 "pcie.reg", 4 * 1024); 689 sysbus_init_mmio(sbd, &s->mmio); 690 691 memory_region_init(&s->pci.io, OBJECT(s), "pcie-pio", 16); 692 memory_region_init(&s->pci.memory, OBJECT(s), 693 "pcie-bus-memory", 694 UINT64_MAX); 695 696 pci->bus = pci_register_root_bus(dev, "pcie", 697 designware_pcie_set_irq, 698 pci_swizzle_map_irq_fn, 699 s, 700 &s->pci.memory, 701 &s->pci.io, 702 0, 4, 703 TYPE_PCIE_BUS); 704 pci->bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE; 705 706 memory_region_init(&s->pci.address_space_root, 707 OBJECT(s), 708 "pcie-bus-address-space-root", 709 UINT64_MAX); 710 memory_region_add_subregion(&s->pci.address_space_root, 711 0x0, &s->pci.memory); 712 address_space_init(&s->pci.address_space, 713 &s->pci.address_space_root, 714 "pcie-bus-address-space"); 715 pci_setup_iommu(pci->bus, &designware_iommu_ops, s); 716 717 qdev_realize(DEVICE(&s->root), BUS(pci->bus), &error_fatal); 718 } 719 720 static const VMStateDescription vmstate_designware_pcie_host = { 721 .name = "designware-pcie-host", 722 .version_id = 1, 723 .minimum_version_id = 1, 724 .fields = (const VMStateField[]) { 725 VMSTATE_STRUCT(root, 726 DesignwarePCIEHost, 727 1, 728 vmstate_designware_pcie_root, 729 DesignwarePCIERoot), 730 VMSTATE_END_OF_LIST() 731 } 732 }; 733 734 static void designware_pcie_host_class_init(ObjectClass *klass, void *data) 735 { 736 DeviceClass *dc = DEVICE_CLASS(klass); 737 PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass); 738 739 hc->root_bus_path = designware_pcie_host_root_bus_path; 740 dc->realize = designware_pcie_host_realize; 741 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 742 dc->fw_name = "pci"; 743 dc->vmsd = &vmstate_designware_pcie_host; 744 } 745 746 static void designware_pcie_host_init(Object *obj) 747 { 748 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(obj); 749 DesignwarePCIERoot *root = &s->root; 750 751 object_initialize_child(obj, "root", root, TYPE_DESIGNWARE_PCIE_ROOT); 752 qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0)); 753 qdev_prop_set_bit(DEVICE(root), "multifunction", false); 754 } 755 756 static const TypeInfo designware_pcie_types[] = { 757 { 758 .name = TYPE_DESIGNWARE_PCIE_HOST, 759 .parent = TYPE_PCI_HOST_BRIDGE, 760 .instance_size = sizeof(DesignwarePCIEHost), 761 .instance_init = designware_pcie_host_init, 762 .class_init = designware_pcie_host_class_init, 763 }, { 764 .name = TYPE_DESIGNWARE_PCIE_ROOT, 765 .parent = TYPE_PCI_BRIDGE, 766 .instance_size = sizeof(DesignwarePCIERoot), 767 .class_init = designware_pcie_root_class_init, 768 .interfaces = (InterfaceInfo[]) { 769 { INTERFACE_PCIE_DEVICE }, 770 { } 771 }, 772 }, 773 }; 774 775 DEFINE_TYPES(designware_pcie_types) 776