1 /* 2 * Copyright (c) 2018, Impinj, Inc. 3 * 4 * Designware PCIe IP block emulation 5 * 6 * This library is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU Lesser General Public 8 * License as published by the Free Software Foundation; either 9 * version 2 of the License, or (at your option) any later version. 10 * 11 * This library is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * Lesser General Public License for more details. 15 * 16 * You should have received a copy of the GNU Lesser General Public 17 * License along with this library; if not, see 18 * <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "qemu/osdep.h" 22 #include "qapi/error.h" 23 #include "hw/pci/msi.h" 24 #include "hw/pci/pci_bridge.h" 25 #include "hw/pci/pci_host.h" 26 #include "hw/pci/pcie_port.h" 27 #include "hw/pci-host/designware.h" 28 29 #define DESIGNWARE_PCIE_PORT_LINK_CONTROL 0x710 30 #define DESIGNWARE_PCIE_PHY_DEBUG_R1 0x72C 31 #define DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP BIT(4) 32 #define DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C 33 #define DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE BIT(17) 34 #define DESIGNWARE_PCIE_MSI_ADDR_LO 0x820 35 #define DESIGNWARE_PCIE_MSI_ADDR_HI 0x824 36 #define DESIGNWARE_PCIE_MSI_INTR0_ENABLE 0x828 37 #define DESIGNWARE_PCIE_MSI_INTR0_MASK 0x82C 38 #define DESIGNWARE_PCIE_MSI_INTR0_STATUS 0x830 39 #define DESIGNWARE_PCIE_ATU_VIEWPORT 0x900 40 #define DESIGNWARE_PCIE_ATU_REGION_INBOUND BIT(31) 41 #define DESIGNWARE_PCIE_ATU_CR1 0x904 42 #define DESIGNWARE_PCIE_ATU_TYPE_MEM (0x0 << 0) 43 #define DESIGNWARE_PCIE_ATU_CR2 0x908 44 #define DESIGNWARE_PCIE_ATU_ENABLE BIT(31) 45 #define DESIGNWARE_PCIE_ATU_LOWER_BASE 0x90C 46 #define DESIGNWARE_PCIE_ATU_UPPER_BASE 0x910 47 #define DESIGNWARE_PCIE_ATU_LIMIT 0x914 48 #define DESIGNWARE_PCIE_ATU_LOWER_TARGET 0x918 49 #define DESIGNWARE_PCIE_ATU_BUS(x) (((x) >> 24) & 0xff) 50 #define DESIGNWARE_PCIE_ATU_DEVFN(x) (((x) >> 16) & 0xff) 51 #define DESIGNWARE_PCIE_ATU_UPPER_TARGET 0x91C 52 53 static DesignwarePCIEHost * 54 designware_pcie_root_to_host(DesignwarePCIERoot *root) 55 { 56 BusState *bus = qdev_get_parent_bus(DEVICE(root)); 57 return DESIGNWARE_PCIE_HOST(bus->parent); 58 } 59 60 static void designware_pcie_root_msi_write(void *opaque, hwaddr addr, 61 uint64_t val, unsigned len) 62 { 63 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(opaque); 64 DesignwarePCIEHost *host = designware_pcie_root_to_host(root); 65 66 root->msi.intr[0].status |= BIT(val) & root->msi.intr[0].enable; 67 68 if (root->msi.intr[0].status & ~root->msi.intr[0].mask) { 69 qemu_set_irq(host->pci.irqs[0], 1); 70 } 71 } 72 73 static const MemoryRegionOps designware_pci_host_msi_ops = { 74 .write = designware_pcie_root_msi_write, 75 .endianness = DEVICE_LITTLE_ENDIAN, 76 .valid = { 77 .min_access_size = 4, 78 .max_access_size = 4, 79 }, 80 }; 81 82 static void designware_pcie_root_update_msi_mapping(DesignwarePCIERoot *root) 83 84 { 85 MemoryRegion *mem = &root->msi.iomem; 86 const uint64_t base = root->msi.base; 87 const bool enable = root->msi.intr[0].enable; 88 89 memory_region_set_address(mem, base); 90 memory_region_set_enabled(mem, enable); 91 } 92 93 static DesignwarePCIEViewport * 94 designware_pcie_root_get_current_viewport(DesignwarePCIERoot *root) 95 { 96 const unsigned int idx = root->atu_viewport & 0xF; 97 const unsigned int dir = 98 !!(root->atu_viewport & DESIGNWARE_PCIE_ATU_REGION_INBOUND); 99 return &root->viewports[dir][idx]; 100 } 101 102 static uint32_t 103 designware_pcie_root_config_read(PCIDevice *d, uint32_t address, int len) 104 { 105 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d); 106 DesignwarePCIEViewport *viewport = 107 designware_pcie_root_get_current_viewport(root); 108 109 uint32_t val; 110 111 switch (address) { 112 case DESIGNWARE_PCIE_PORT_LINK_CONTROL: 113 /* 114 * Linux guest uses this register only to configure number of 115 * PCIE lane (which in our case is irrelevant) and doesn't 116 * really care about the value it reads from this register 117 */ 118 val = 0xDEADBEEF; 119 break; 120 121 case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL: 122 /* 123 * To make sure that any code in guest waiting for speed 124 * change does not time out we always report 125 * PORT_LOGIC_SPEED_CHANGE as set 126 */ 127 val = DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE; 128 break; 129 130 case DESIGNWARE_PCIE_MSI_ADDR_LO: 131 val = root->msi.base; 132 break; 133 134 case DESIGNWARE_PCIE_MSI_ADDR_HI: 135 val = root->msi.base >> 32; 136 break; 137 138 case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: 139 val = root->msi.intr[0].enable; 140 break; 141 142 case DESIGNWARE_PCIE_MSI_INTR0_MASK: 143 val = root->msi.intr[0].mask; 144 break; 145 146 case DESIGNWARE_PCIE_MSI_INTR0_STATUS: 147 val = root->msi.intr[0].status; 148 break; 149 150 case DESIGNWARE_PCIE_PHY_DEBUG_R1: 151 val = DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP; 152 break; 153 154 case DESIGNWARE_PCIE_ATU_VIEWPORT: 155 val = root->atu_viewport; 156 break; 157 158 case DESIGNWARE_PCIE_ATU_LOWER_BASE: 159 val = viewport->base; 160 break; 161 162 case DESIGNWARE_PCIE_ATU_UPPER_BASE: 163 val = viewport->base >> 32; 164 break; 165 166 case DESIGNWARE_PCIE_ATU_LOWER_TARGET: 167 val = viewport->target; 168 break; 169 170 case DESIGNWARE_PCIE_ATU_UPPER_TARGET: 171 val = viewport->target >> 32; 172 break; 173 174 case DESIGNWARE_PCIE_ATU_LIMIT: 175 val = viewport->limit; 176 break; 177 178 case DESIGNWARE_PCIE_ATU_CR1: 179 case DESIGNWARE_PCIE_ATU_CR2: /* FALLTHROUGH */ 180 val = viewport->cr[(address - DESIGNWARE_PCIE_ATU_CR1) / 181 sizeof(uint32_t)]; 182 break; 183 184 default: 185 val = pci_default_read_config(d, address, len); 186 break; 187 } 188 189 return val; 190 } 191 192 static uint64_t designware_pcie_root_data_access(void *opaque, hwaddr addr, 193 uint64_t *val, unsigned len) 194 { 195 DesignwarePCIEViewport *viewport = opaque; 196 DesignwarePCIERoot *root = viewport->root; 197 198 const uint8_t busnum = DESIGNWARE_PCIE_ATU_BUS(viewport->target); 199 const uint8_t devfn = DESIGNWARE_PCIE_ATU_DEVFN(viewport->target); 200 PCIBus *pcibus = pci_get_bus(PCI_DEVICE(root)); 201 PCIDevice *pcidev = pci_find_device(pcibus, busnum, devfn); 202 203 if (pcidev) { 204 addr &= pci_config_size(pcidev) - 1; 205 206 if (val) { 207 pci_host_config_write_common(pcidev, addr, 208 pci_config_size(pcidev), 209 *val, len); 210 } else { 211 return pci_host_config_read_common(pcidev, addr, 212 pci_config_size(pcidev), 213 len); 214 } 215 } 216 217 return UINT64_MAX; 218 } 219 220 static uint64_t designware_pcie_root_data_read(void *opaque, hwaddr addr, 221 unsigned len) 222 { 223 return designware_pcie_root_data_access(opaque, addr, NULL, len); 224 } 225 226 static void designware_pcie_root_data_write(void *opaque, hwaddr addr, 227 uint64_t val, unsigned len) 228 { 229 designware_pcie_root_data_access(opaque, addr, &val, len); 230 } 231 232 static const MemoryRegionOps designware_pci_host_conf_ops = { 233 .read = designware_pcie_root_data_read, 234 .write = designware_pcie_root_data_write, 235 .endianness = DEVICE_LITTLE_ENDIAN, 236 .valid = { 237 .min_access_size = 1, 238 .max_access_size = 4, 239 }, 240 }; 241 242 static void designware_pcie_update_viewport(DesignwarePCIERoot *root, 243 DesignwarePCIEViewport *viewport) 244 { 245 const uint64_t target = viewport->target; 246 const uint64_t base = viewport->base; 247 const uint64_t size = (uint64_t)viewport->limit - base + 1; 248 const bool enabled = viewport->cr[1] & DESIGNWARE_PCIE_ATU_ENABLE; 249 250 MemoryRegion *current, *other; 251 252 if (viewport->cr[0] == DESIGNWARE_PCIE_ATU_TYPE_MEM) { 253 current = &viewport->mem; 254 other = &viewport->cfg; 255 memory_region_set_alias_offset(current, target); 256 } else { 257 current = &viewport->cfg; 258 other = &viewport->mem; 259 } 260 261 /* 262 * An outbound viewport can be reconfigure from being MEM to CFG, 263 * to account for that we disable the "other" memory region that 264 * becomes unused due to that fact. 265 */ 266 memory_region_set_enabled(other, false); 267 if (enabled) { 268 memory_region_set_size(current, size); 269 memory_region_set_address(current, base); 270 } 271 memory_region_set_enabled(current, enabled); 272 } 273 274 static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address, 275 uint32_t val, int len) 276 { 277 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d); 278 DesignwarePCIEHost *host = designware_pcie_root_to_host(root); 279 DesignwarePCIEViewport *viewport = 280 designware_pcie_root_get_current_viewport(root); 281 282 switch (address) { 283 case DESIGNWARE_PCIE_PORT_LINK_CONTROL: 284 case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL: 285 case DESIGNWARE_PCIE_PHY_DEBUG_R1: 286 /* No-op */ 287 break; 288 289 case DESIGNWARE_PCIE_MSI_ADDR_LO: 290 root->msi.base &= 0xFFFFFFFF00000000ULL; 291 root->msi.base |= val; 292 break; 293 294 case DESIGNWARE_PCIE_MSI_ADDR_HI: 295 root->msi.base &= 0x00000000FFFFFFFFULL; 296 root->msi.base |= (uint64_t)val << 32; 297 break; 298 299 case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: { 300 const bool update_msi_mapping = !root->msi.intr[0].enable ^ !!val; 301 302 root->msi.intr[0].enable = val; 303 304 if (update_msi_mapping) { 305 designware_pcie_root_update_msi_mapping(root); 306 } 307 break; 308 } 309 310 case DESIGNWARE_PCIE_MSI_INTR0_MASK: 311 root->msi.intr[0].mask = val; 312 break; 313 314 case DESIGNWARE_PCIE_MSI_INTR0_STATUS: 315 root->msi.intr[0].status ^= val; 316 if (!root->msi.intr[0].status) { 317 qemu_set_irq(host->pci.irqs[0], 0); 318 } 319 break; 320 321 case DESIGNWARE_PCIE_ATU_VIEWPORT: 322 root->atu_viewport = val; 323 break; 324 325 case DESIGNWARE_PCIE_ATU_LOWER_BASE: 326 viewport->base &= 0xFFFFFFFF00000000ULL; 327 viewport->base |= val; 328 break; 329 330 case DESIGNWARE_PCIE_ATU_UPPER_BASE: 331 viewport->base &= 0x00000000FFFFFFFFULL; 332 viewport->base |= (uint64_t)val << 32; 333 break; 334 335 case DESIGNWARE_PCIE_ATU_LOWER_TARGET: 336 viewport->target &= 0xFFFFFFFF00000000ULL; 337 viewport->target |= val; 338 break; 339 340 case DESIGNWARE_PCIE_ATU_UPPER_TARGET: 341 viewport->target &= 0x00000000FFFFFFFFULL; 342 viewport->target |= val; 343 break; 344 345 case DESIGNWARE_PCIE_ATU_LIMIT: 346 viewport->limit = val; 347 break; 348 349 case DESIGNWARE_PCIE_ATU_CR1: 350 viewport->cr[0] = val; 351 break; 352 case DESIGNWARE_PCIE_ATU_CR2: 353 viewport->cr[1] = val; 354 designware_pcie_update_viewport(root, viewport); 355 break; 356 357 default: 358 pci_bridge_write_config(d, address, val, len); 359 break; 360 } 361 } 362 363 static char *designware_pcie_viewport_name(const char *direction, 364 unsigned int i, 365 const char *type) 366 { 367 return g_strdup_printf("PCI %s Viewport %u [%s]", 368 direction, i, type); 369 } 370 371 static void designware_pcie_root_realize(PCIDevice *dev, Error **errp) 372 { 373 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(dev); 374 DesignwarePCIEHost *host = designware_pcie_root_to_host(root); 375 MemoryRegion *address_space = &host->pci.memory; 376 PCIBridge *br = PCI_BRIDGE(dev); 377 DesignwarePCIEViewport *viewport; 378 /* 379 * Dummy values used for initial configuration of MemoryRegions 380 * that belong to a given viewport 381 */ 382 const hwaddr dummy_offset = 0; 383 const uint64_t dummy_size = 4; 384 size_t i; 385 386 br->bus_name = "dw-pcie"; 387 388 pci_set_word(dev->config + PCI_COMMAND, 389 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); 390 391 pci_config_set_interrupt_pin(dev->config, 1); 392 pci_bridge_initfn(dev, TYPE_PCIE_BUS); 393 394 pcie_port_init_reg(dev); 395 396 pcie_cap_init(dev, 0x70, PCI_EXP_TYPE_ROOT_PORT, 397 0, &error_fatal); 398 399 msi_nonbroken = true; 400 msi_init(dev, 0x50, 32, true, true, &error_fatal); 401 402 for (i = 0; i < DESIGNWARE_PCIE_NUM_VIEWPORTS; i++) { 403 MemoryRegion *source, *destination, *mem; 404 const char *direction; 405 char *name; 406 407 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][i]; 408 viewport->inbound = true; 409 viewport->base = 0x0000000000000000ULL; 410 viewport->target = 0x0000000000000000ULL; 411 viewport->limit = UINT32_MAX; 412 viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM; 413 414 source = &host->pci.address_space_root; 415 destination = get_system_memory(); 416 direction = "Inbound"; 417 418 /* 419 * Configure MemoryRegion implementing PCI -> CPU memory 420 * access 421 */ 422 mem = &viewport->mem; 423 name = designware_pcie_viewport_name(direction, i, "MEM"); 424 memory_region_init_alias(mem, OBJECT(root), name, destination, 425 dummy_offset, dummy_size); 426 memory_region_add_subregion_overlap(source, dummy_offset, mem, -1); 427 memory_region_set_enabled(mem, false); 428 g_free(name); 429 430 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_OUTBOUND][i]; 431 viewport->root = root; 432 viewport->inbound = false; 433 viewport->base = 0x0000000000000000ULL; 434 viewport->target = 0x0000000000000000ULL; 435 viewport->limit = UINT32_MAX; 436 viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM; 437 438 destination = &host->pci.memory; 439 direction = "Outbound"; 440 source = get_system_memory(); 441 442 /* 443 * Configure MemoryRegion implementing CPU -> PCI memory 444 * access 445 */ 446 mem = &viewport->mem; 447 name = designware_pcie_viewport_name(direction, i, "MEM"); 448 memory_region_init_alias(mem, OBJECT(root), name, destination, 449 dummy_offset, dummy_size); 450 memory_region_add_subregion(source, dummy_offset, mem); 451 memory_region_set_enabled(mem, false); 452 g_free(name); 453 454 /* 455 * Configure MemoryRegion implementing access to configuration 456 * space 457 */ 458 mem = &viewport->cfg; 459 name = designware_pcie_viewport_name(direction, i, "CFG"); 460 memory_region_init_io(&viewport->cfg, OBJECT(root), 461 &designware_pci_host_conf_ops, 462 viewport, name, dummy_size); 463 memory_region_add_subregion(source, dummy_offset, mem); 464 memory_region_set_enabled(mem, false); 465 g_free(name); 466 } 467 468 /* 469 * If no inbound iATU windows are configured, HW defaults to 470 * letting inbound TLPs to pass in. We emulate that by exlicitly 471 * configuring first inbound window to cover all of target's 472 * address space. 473 * 474 * NOTE: This will not work correctly for the case when first 475 * configured inbound window is window 0 476 */ 477 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][0]; 478 viewport->cr[1] = DESIGNWARE_PCIE_ATU_ENABLE; 479 designware_pcie_update_viewport(root, viewport); 480 481 memory_region_init_io(&root->msi.iomem, OBJECT(root), 482 &designware_pci_host_msi_ops, 483 root, "pcie-msi", 0x4); 484 /* 485 * We initially place MSI interrupt I/O region a adress 0 and 486 * disable it. It'll be later moved to correct offset and enabled 487 * in designware_pcie_root_update_msi_mapping() as a part of 488 * initialization done by guest OS 489 */ 490 memory_region_add_subregion(address_space, dummy_offset, &root->msi.iomem); 491 memory_region_set_enabled(&root->msi.iomem, false); 492 } 493 494 static void designware_pcie_set_irq(void *opaque, int irq_num, int level) 495 { 496 DesignwarePCIEHost *host = DESIGNWARE_PCIE_HOST(opaque); 497 498 qemu_set_irq(host->pci.irqs[irq_num], level); 499 } 500 501 static const char * 502 designware_pcie_host_root_bus_path(PCIHostState *host_bridge, PCIBus *rootbus) 503 { 504 return "0000:00"; 505 } 506 507 static const VMStateDescription vmstate_designware_pcie_msi_bank = { 508 .name = "designware-pcie-msi-bank", 509 .version_id = 1, 510 .minimum_version_id = 1, 511 .fields = (VMStateField[]) { 512 VMSTATE_UINT32(enable, DesignwarePCIEMSIBank), 513 VMSTATE_UINT32(mask, DesignwarePCIEMSIBank), 514 VMSTATE_UINT32(status, DesignwarePCIEMSIBank), 515 VMSTATE_END_OF_LIST() 516 } 517 }; 518 519 static const VMStateDescription vmstate_designware_pcie_msi = { 520 .name = "designware-pcie-msi", 521 .version_id = 1, 522 .minimum_version_id = 1, 523 .fields = (VMStateField[]) { 524 VMSTATE_UINT64(base, DesignwarePCIEMSI), 525 VMSTATE_STRUCT_ARRAY(intr, 526 DesignwarePCIEMSI, 527 DESIGNWARE_PCIE_NUM_MSI_BANKS, 528 1, 529 vmstate_designware_pcie_msi_bank, 530 DesignwarePCIEMSIBank), 531 VMSTATE_END_OF_LIST() 532 } 533 }; 534 535 static const VMStateDescription vmstate_designware_pcie_viewport = { 536 .name = "designware-pcie-viewport", 537 .version_id = 1, 538 .minimum_version_id = 1, 539 .fields = (VMStateField[]) { 540 VMSTATE_UINT64(base, DesignwarePCIEViewport), 541 VMSTATE_UINT64(target, DesignwarePCIEViewport), 542 VMSTATE_UINT32(limit, DesignwarePCIEViewport), 543 VMSTATE_UINT32_ARRAY(cr, DesignwarePCIEViewport, 2), 544 VMSTATE_END_OF_LIST() 545 } 546 }; 547 548 static const VMStateDescription vmstate_designware_pcie_root = { 549 .name = "designware-pcie-root", 550 .version_id = 1, 551 .minimum_version_id = 1, 552 .fields = (VMStateField[]) { 553 VMSTATE_PCI_DEVICE(parent_obj, PCIBridge), 554 VMSTATE_UINT32(atu_viewport, DesignwarePCIERoot), 555 VMSTATE_STRUCT_2DARRAY(viewports, 556 DesignwarePCIERoot, 557 2, 558 DESIGNWARE_PCIE_NUM_VIEWPORTS, 559 1, 560 vmstate_designware_pcie_viewport, 561 DesignwarePCIEViewport), 562 VMSTATE_STRUCT(msi, 563 DesignwarePCIERoot, 564 1, 565 vmstate_designware_pcie_msi, 566 DesignwarePCIEMSI), 567 VMSTATE_END_OF_LIST() 568 } 569 }; 570 571 static void designware_pcie_root_class_init(ObjectClass *klass, void *data) 572 { 573 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 574 DeviceClass *dc = DEVICE_CLASS(klass); 575 576 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 577 578 k->vendor_id = PCI_VENDOR_ID_SYNOPSYS; 579 k->device_id = 0xABCD; 580 k->revision = 0; 581 k->class_id = PCI_CLASS_BRIDGE_PCI; 582 k->is_bridge = true; 583 k->exit = pci_bridge_exitfn; 584 k->realize = designware_pcie_root_realize; 585 k->config_read = designware_pcie_root_config_read; 586 k->config_write = designware_pcie_root_config_write; 587 588 dc->reset = pci_bridge_reset; 589 /* 590 * PCI-facing part of the host bridge, not usable without the 591 * host-facing part, which can't be device_add'ed, yet. 592 */ 593 dc->user_creatable = false; 594 dc->vmsd = &vmstate_designware_pcie_root; 595 } 596 597 static uint64_t designware_pcie_host_mmio_read(void *opaque, hwaddr addr, 598 unsigned int size) 599 { 600 PCIHostState *pci = PCI_HOST_BRIDGE(opaque); 601 PCIDevice *device = pci_find_device(pci->bus, 0, 0); 602 603 return pci_host_config_read_common(device, 604 addr, 605 pci_config_size(device), 606 size); 607 } 608 609 static void designware_pcie_host_mmio_write(void *opaque, hwaddr addr, 610 uint64_t val, unsigned int size) 611 { 612 PCIHostState *pci = PCI_HOST_BRIDGE(opaque); 613 PCIDevice *device = pci_find_device(pci->bus, 0, 0); 614 615 return pci_host_config_write_common(device, 616 addr, 617 pci_config_size(device), 618 val, size); 619 } 620 621 static const MemoryRegionOps designware_pci_mmio_ops = { 622 .read = designware_pcie_host_mmio_read, 623 .write = designware_pcie_host_mmio_write, 624 .endianness = DEVICE_LITTLE_ENDIAN, 625 .impl = { 626 /* 627 * Our device would not work correctly if the guest was doing 628 * unaligned access. This might not be a limitation on the real 629 * device but in practice there is no reason for a guest to access 630 * this device unaligned. 631 */ 632 .min_access_size = 4, 633 .max_access_size = 4, 634 .unaligned = false, 635 }, 636 }; 637 638 static AddressSpace *designware_pcie_host_set_iommu(PCIBus *bus, void *opaque, 639 int devfn) 640 { 641 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(opaque); 642 643 return &s->pci.address_space; 644 } 645 646 static void designware_pcie_host_realize(DeviceState *dev, Error **errp) 647 { 648 PCIHostState *pci = PCI_HOST_BRIDGE(dev); 649 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(dev); 650 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 651 size_t i; 652 653 for (i = 0; i < ARRAY_SIZE(s->pci.irqs); i++) { 654 sysbus_init_irq(sbd, &s->pci.irqs[i]); 655 } 656 657 memory_region_init_io(&s->mmio, 658 OBJECT(s), 659 &designware_pci_mmio_ops, 660 s, 661 "pcie.reg", 4 * 1024); 662 sysbus_init_mmio(sbd, &s->mmio); 663 664 memory_region_init(&s->pci.io, OBJECT(s), "pcie-pio", 16); 665 memory_region_init(&s->pci.memory, OBJECT(s), 666 "pcie-bus-memory", 667 UINT64_MAX); 668 669 pci->bus = pci_register_root_bus(dev, "pcie", 670 designware_pcie_set_irq, 671 pci_swizzle_map_irq_fn, 672 s, 673 &s->pci.memory, 674 &s->pci.io, 675 0, 4, 676 TYPE_PCIE_BUS); 677 678 memory_region_init(&s->pci.address_space_root, 679 OBJECT(s), 680 "pcie-bus-address-space-root", 681 UINT64_MAX); 682 memory_region_add_subregion(&s->pci.address_space_root, 683 0x0, &s->pci.memory); 684 address_space_init(&s->pci.address_space, 685 &s->pci.address_space_root, 686 "pcie-bus-address-space"); 687 pci_setup_iommu(pci->bus, designware_pcie_host_set_iommu, s); 688 689 qdev_set_parent_bus(DEVICE(&s->root), BUS(pci->bus)); 690 qdev_init_nofail(DEVICE(&s->root)); 691 } 692 693 static const VMStateDescription vmstate_designware_pcie_host = { 694 .name = "designware-pcie-host", 695 .version_id = 1, 696 .minimum_version_id = 1, 697 .fields = (VMStateField[]) { 698 VMSTATE_STRUCT(root, 699 DesignwarePCIEHost, 700 1, 701 vmstate_designware_pcie_root, 702 DesignwarePCIERoot), 703 VMSTATE_END_OF_LIST() 704 } 705 }; 706 707 static void designware_pcie_host_class_init(ObjectClass *klass, void *data) 708 { 709 DeviceClass *dc = DEVICE_CLASS(klass); 710 PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass); 711 712 hc->root_bus_path = designware_pcie_host_root_bus_path; 713 dc->realize = designware_pcie_host_realize; 714 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 715 dc->fw_name = "pci"; 716 dc->vmsd = &vmstate_designware_pcie_host; 717 } 718 719 static void designware_pcie_host_init(Object *obj) 720 { 721 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(obj); 722 DesignwarePCIERoot *root = &s->root; 723 724 object_initialize(root, sizeof(*root), TYPE_DESIGNWARE_PCIE_ROOT); 725 object_property_add_child(obj, "root", OBJECT(root), NULL); 726 qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0)); 727 qdev_prop_set_bit(DEVICE(root), "multifunction", false); 728 } 729 730 static const TypeInfo designware_pcie_root_info = { 731 .name = TYPE_DESIGNWARE_PCIE_ROOT, 732 .parent = TYPE_PCI_BRIDGE, 733 .instance_size = sizeof(DesignwarePCIERoot), 734 .class_init = designware_pcie_root_class_init, 735 .interfaces = (InterfaceInfo[]) { 736 { INTERFACE_PCIE_DEVICE }, 737 { } 738 }, 739 }; 740 741 static const TypeInfo designware_pcie_host_info = { 742 .name = TYPE_DESIGNWARE_PCIE_HOST, 743 .parent = TYPE_PCI_HOST_BRIDGE, 744 .instance_size = sizeof(DesignwarePCIEHost), 745 .instance_init = designware_pcie_host_init, 746 .class_init = designware_pcie_host_class_init, 747 }; 748 749 static void designware_pcie_register(void) 750 { 751 type_register_static(&designware_pcie_root_info); 752 type_register_static(&designware_pcie_host_info); 753 } 754 type_init(designware_pcie_register) 755