1 /* 2 * Copyright (c) 2018, Impinj, Inc. 3 * 4 * Designware PCIe IP block emulation 5 * 6 * This library is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU Lesser General Public 8 * License as published by the Free Software Foundation; either 9 * version 2 of the License, or (at your option) any later version. 10 * 11 * This library is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * Lesser General Public License for more details. 15 * 16 * You should have received a copy of the GNU Lesser General Public 17 * License along with this library; if not, see 18 * <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "qemu/osdep.h" 22 #include "qapi/error.h" 23 #include "qemu/module.h" 24 #include "hw/pci/msi.h" 25 #include "hw/pci/pci_bridge.h" 26 #include "hw/pci/pci_host.h" 27 #include "hw/pci/pcie_port.h" 28 #include "hw/qdev-properties.h" 29 #include "migration/vmstate.h" 30 #include "hw/irq.h" 31 #include "hw/pci-host/designware.h" 32 33 #define DESIGNWARE_PCIE_PORT_LINK_CONTROL 0x710 34 #define DESIGNWARE_PCIE_PHY_DEBUG_R1 0x72C 35 #define DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP BIT(4) 36 #define DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C 37 #define DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE BIT(17) 38 #define DESIGNWARE_PCIE_MSI_ADDR_LO 0x820 39 #define DESIGNWARE_PCIE_MSI_ADDR_HI 0x824 40 #define DESIGNWARE_PCIE_MSI_INTR0_ENABLE 0x828 41 #define DESIGNWARE_PCIE_MSI_INTR0_MASK 0x82C 42 #define DESIGNWARE_PCIE_MSI_INTR0_STATUS 0x830 43 #define DESIGNWARE_PCIE_ATU_VIEWPORT 0x900 44 #define DESIGNWARE_PCIE_ATU_REGION_INBOUND BIT(31) 45 #define DESIGNWARE_PCIE_ATU_CR1 0x904 46 #define DESIGNWARE_PCIE_ATU_TYPE_MEM (0x0 << 0) 47 #define DESIGNWARE_PCIE_ATU_CR2 0x908 48 #define DESIGNWARE_PCIE_ATU_ENABLE BIT(31) 49 #define DESIGNWARE_PCIE_ATU_LOWER_BASE 0x90C 50 #define DESIGNWARE_PCIE_ATU_UPPER_BASE 0x910 51 #define DESIGNWARE_PCIE_ATU_LIMIT 0x914 52 #define DESIGNWARE_PCIE_ATU_LOWER_TARGET 0x918 53 #define DESIGNWARE_PCIE_ATU_BUS(x) (((x) >> 24) & 0xff) 54 #define DESIGNWARE_PCIE_ATU_DEVFN(x) (((x) >> 16) & 0xff) 55 #define DESIGNWARE_PCIE_ATU_UPPER_TARGET 0x91C 56 57 #define DESIGNWARE_PCIE_IRQ_MSI 3 58 59 static DesignwarePCIEHost * 60 designware_pcie_root_to_host(DesignwarePCIERoot *root) 61 { 62 BusState *bus = qdev_get_parent_bus(DEVICE(root)); 63 return DESIGNWARE_PCIE_HOST(bus->parent); 64 } 65 66 static void designware_pcie_root_msi_write(void *opaque, hwaddr addr, 67 uint64_t val, unsigned len) 68 { 69 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(opaque); 70 DesignwarePCIEHost *host = designware_pcie_root_to_host(root); 71 72 root->msi.intr[0].status |= BIT(val) & root->msi.intr[0].enable; 73 74 if (root->msi.intr[0].status & ~root->msi.intr[0].mask) { 75 qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 1); 76 } 77 } 78 79 static const MemoryRegionOps designware_pci_host_msi_ops = { 80 .write = designware_pcie_root_msi_write, 81 .endianness = DEVICE_LITTLE_ENDIAN, 82 .valid = { 83 .min_access_size = 4, 84 .max_access_size = 4, 85 }, 86 }; 87 88 static void designware_pcie_root_update_msi_mapping(DesignwarePCIERoot *root) 89 90 { 91 MemoryRegion *mem = &root->msi.iomem; 92 const uint64_t base = root->msi.base; 93 const bool enable = root->msi.intr[0].enable; 94 95 memory_region_set_address(mem, base); 96 memory_region_set_enabled(mem, enable); 97 } 98 99 static DesignwarePCIEViewport * 100 designware_pcie_root_get_current_viewport(DesignwarePCIERoot *root) 101 { 102 const unsigned int idx = root->atu_viewport & 0xF; 103 const unsigned int dir = 104 !!(root->atu_viewport & DESIGNWARE_PCIE_ATU_REGION_INBOUND); 105 return &root->viewports[dir][idx]; 106 } 107 108 static uint32_t 109 designware_pcie_root_config_read(PCIDevice *d, uint32_t address, int len) 110 { 111 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d); 112 DesignwarePCIEViewport *viewport = 113 designware_pcie_root_get_current_viewport(root); 114 115 uint32_t val; 116 117 switch (address) { 118 case DESIGNWARE_PCIE_PORT_LINK_CONTROL: 119 /* 120 * Linux guest uses this register only to configure number of 121 * PCIE lane (which in our case is irrelevant) and doesn't 122 * really care about the value it reads from this register 123 */ 124 val = 0xDEADBEEF; 125 break; 126 127 case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL: 128 /* 129 * To make sure that any code in guest waiting for speed 130 * change does not time out we always report 131 * PORT_LOGIC_SPEED_CHANGE as set 132 */ 133 val = DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE; 134 break; 135 136 case DESIGNWARE_PCIE_MSI_ADDR_LO: 137 val = root->msi.base; 138 break; 139 140 case DESIGNWARE_PCIE_MSI_ADDR_HI: 141 val = root->msi.base >> 32; 142 break; 143 144 case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: 145 val = root->msi.intr[0].enable; 146 break; 147 148 case DESIGNWARE_PCIE_MSI_INTR0_MASK: 149 val = root->msi.intr[0].mask; 150 break; 151 152 case DESIGNWARE_PCIE_MSI_INTR0_STATUS: 153 val = root->msi.intr[0].status; 154 break; 155 156 case DESIGNWARE_PCIE_PHY_DEBUG_R1: 157 val = DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP; 158 break; 159 160 case DESIGNWARE_PCIE_ATU_VIEWPORT: 161 val = root->atu_viewport; 162 break; 163 164 case DESIGNWARE_PCIE_ATU_LOWER_BASE: 165 val = viewport->base; 166 break; 167 168 case DESIGNWARE_PCIE_ATU_UPPER_BASE: 169 val = viewport->base >> 32; 170 break; 171 172 case DESIGNWARE_PCIE_ATU_LOWER_TARGET: 173 val = viewport->target; 174 break; 175 176 case DESIGNWARE_PCIE_ATU_UPPER_TARGET: 177 val = viewport->target >> 32; 178 break; 179 180 case DESIGNWARE_PCIE_ATU_LIMIT: 181 val = viewport->limit; 182 break; 183 184 case DESIGNWARE_PCIE_ATU_CR1: 185 case DESIGNWARE_PCIE_ATU_CR2: 186 val = viewport->cr[(address - DESIGNWARE_PCIE_ATU_CR1) / 187 sizeof(uint32_t)]; 188 break; 189 190 default: 191 val = pci_default_read_config(d, address, len); 192 break; 193 } 194 195 return val; 196 } 197 198 static uint64_t designware_pcie_root_data_access(void *opaque, hwaddr addr, 199 uint64_t *val, unsigned len) 200 { 201 DesignwarePCIEViewport *viewport = opaque; 202 DesignwarePCIERoot *root = viewport->root; 203 204 const uint8_t busnum = DESIGNWARE_PCIE_ATU_BUS(viewport->target); 205 const uint8_t devfn = DESIGNWARE_PCIE_ATU_DEVFN(viewport->target); 206 PCIBus *pcibus = pci_get_bus(PCI_DEVICE(root)); 207 PCIDevice *pcidev = pci_find_device(pcibus, busnum, devfn); 208 209 if (pcidev) { 210 addr &= pci_config_size(pcidev) - 1; 211 212 if (val) { 213 pci_host_config_write_common(pcidev, addr, 214 pci_config_size(pcidev), 215 *val, len); 216 } else { 217 return pci_host_config_read_common(pcidev, addr, 218 pci_config_size(pcidev), 219 len); 220 } 221 } 222 223 return UINT64_MAX; 224 } 225 226 static uint64_t designware_pcie_root_data_read(void *opaque, hwaddr addr, 227 unsigned len) 228 { 229 return designware_pcie_root_data_access(opaque, addr, NULL, len); 230 } 231 232 static void designware_pcie_root_data_write(void *opaque, hwaddr addr, 233 uint64_t val, unsigned len) 234 { 235 designware_pcie_root_data_access(opaque, addr, &val, len); 236 } 237 238 static const MemoryRegionOps designware_pci_host_conf_ops = { 239 .read = designware_pcie_root_data_read, 240 .write = designware_pcie_root_data_write, 241 .endianness = DEVICE_LITTLE_ENDIAN, 242 .valid = { 243 .min_access_size = 1, 244 .max_access_size = 4, 245 }, 246 }; 247 248 static void designware_pcie_update_viewport(DesignwarePCIERoot *root, 249 DesignwarePCIEViewport *viewport) 250 { 251 const uint64_t target = viewport->target; 252 const uint64_t base = viewport->base; 253 const uint64_t size = (uint64_t)viewport->limit - base + 1; 254 const bool enabled = viewport->cr[1] & DESIGNWARE_PCIE_ATU_ENABLE; 255 256 MemoryRegion *current, *other; 257 258 if (viewport->cr[0] == DESIGNWARE_PCIE_ATU_TYPE_MEM) { 259 current = &viewport->mem; 260 other = &viewport->cfg; 261 memory_region_set_alias_offset(current, target); 262 } else { 263 current = &viewport->cfg; 264 other = &viewport->mem; 265 } 266 267 /* 268 * An outbound viewport can be reconfigure from being MEM to CFG, 269 * to account for that we disable the "other" memory region that 270 * becomes unused due to that fact. 271 */ 272 memory_region_set_enabled(other, false); 273 if (enabled) { 274 memory_region_set_size(current, size); 275 memory_region_set_address(current, base); 276 } 277 memory_region_set_enabled(current, enabled); 278 } 279 280 static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address, 281 uint32_t val, int len) 282 { 283 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d); 284 DesignwarePCIEHost *host = designware_pcie_root_to_host(root); 285 DesignwarePCIEViewport *viewport = 286 designware_pcie_root_get_current_viewport(root); 287 288 switch (address) { 289 case DESIGNWARE_PCIE_PORT_LINK_CONTROL: 290 case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL: 291 case DESIGNWARE_PCIE_PHY_DEBUG_R1: 292 /* No-op */ 293 break; 294 295 case DESIGNWARE_PCIE_MSI_ADDR_LO: 296 root->msi.base &= 0xFFFFFFFF00000000ULL; 297 root->msi.base |= val; 298 designware_pcie_root_update_msi_mapping(root); 299 break; 300 301 case DESIGNWARE_PCIE_MSI_ADDR_HI: 302 root->msi.base &= 0x00000000FFFFFFFFULL; 303 root->msi.base |= (uint64_t)val << 32; 304 designware_pcie_root_update_msi_mapping(root); 305 break; 306 307 case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: 308 root->msi.intr[0].enable = val; 309 designware_pcie_root_update_msi_mapping(root); 310 break; 311 312 case DESIGNWARE_PCIE_MSI_INTR0_MASK: 313 root->msi.intr[0].mask = val; 314 break; 315 316 case DESIGNWARE_PCIE_MSI_INTR0_STATUS: 317 root->msi.intr[0].status ^= val; 318 if (!root->msi.intr[0].status) { 319 qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 0); 320 } 321 break; 322 323 case DESIGNWARE_PCIE_ATU_VIEWPORT: 324 root->atu_viewport = val; 325 break; 326 327 case DESIGNWARE_PCIE_ATU_LOWER_BASE: 328 viewport->base &= 0xFFFFFFFF00000000ULL; 329 viewport->base |= val; 330 break; 331 332 case DESIGNWARE_PCIE_ATU_UPPER_BASE: 333 viewport->base &= 0x00000000FFFFFFFFULL; 334 viewport->base |= (uint64_t)val << 32; 335 break; 336 337 case DESIGNWARE_PCIE_ATU_LOWER_TARGET: 338 viewport->target &= 0xFFFFFFFF00000000ULL; 339 viewport->target |= val; 340 break; 341 342 case DESIGNWARE_PCIE_ATU_UPPER_TARGET: 343 viewport->target &= 0x00000000FFFFFFFFULL; 344 viewport->target |= val; 345 break; 346 347 case DESIGNWARE_PCIE_ATU_LIMIT: 348 viewport->limit = val; 349 break; 350 351 case DESIGNWARE_PCIE_ATU_CR1: 352 viewport->cr[0] = val; 353 break; 354 case DESIGNWARE_PCIE_ATU_CR2: 355 viewport->cr[1] = val; 356 designware_pcie_update_viewport(root, viewport); 357 break; 358 359 default: 360 pci_bridge_write_config(d, address, val, len); 361 break; 362 } 363 } 364 365 static char *designware_pcie_viewport_name(const char *direction, 366 unsigned int i, 367 const char *type) 368 { 369 return g_strdup_printf("PCI %s Viewport %u [%s]", 370 direction, i, type); 371 } 372 373 static void designware_pcie_root_realize(PCIDevice *dev, Error **errp) 374 { 375 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(dev); 376 DesignwarePCIEHost *host = designware_pcie_root_to_host(root); 377 MemoryRegion *address_space = &host->pci.memory; 378 PCIBridge *br = PCI_BRIDGE(dev); 379 DesignwarePCIEViewport *viewport; 380 /* 381 * Dummy values used for initial configuration of MemoryRegions 382 * that belong to a given viewport 383 */ 384 const hwaddr dummy_offset = 0; 385 const uint64_t dummy_size = 4; 386 size_t i; 387 388 br->bus_name = "dw-pcie"; 389 390 pci_set_word(dev->config + PCI_COMMAND, 391 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); 392 393 pci_config_set_interrupt_pin(dev->config, 1); 394 pci_bridge_initfn(dev, TYPE_PCIE_BUS); 395 396 pcie_port_init_reg(dev); 397 398 pcie_cap_init(dev, 0x70, PCI_EXP_TYPE_ROOT_PORT, 399 0, &error_fatal); 400 401 msi_nonbroken = true; 402 msi_init(dev, 0x50, 32, true, true, &error_fatal); 403 404 for (i = 0; i < DESIGNWARE_PCIE_NUM_VIEWPORTS; i++) { 405 MemoryRegion *source, *destination, *mem; 406 const char *direction; 407 char *name; 408 409 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][i]; 410 viewport->inbound = true; 411 viewport->base = 0x0000000000000000ULL; 412 viewport->target = 0x0000000000000000ULL; 413 viewport->limit = UINT32_MAX; 414 viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM; 415 416 source = &host->pci.address_space_root; 417 destination = get_system_memory(); 418 direction = "Inbound"; 419 420 /* 421 * Configure MemoryRegion implementing PCI -> CPU memory 422 * access 423 */ 424 mem = &viewport->mem; 425 name = designware_pcie_viewport_name(direction, i, "MEM"); 426 memory_region_init_alias(mem, OBJECT(root), name, destination, 427 dummy_offset, dummy_size); 428 memory_region_add_subregion_overlap(source, dummy_offset, mem, -1); 429 memory_region_set_enabled(mem, false); 430 g_free(name); 431 432 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_OUTBOUND][i]; 433 viewport->root = root; 434 viewport->inbound = false; 435 viewport->base = 0x0000000000000000ULL; 436 viewport->target = 0x0000000000000000ULL; 437 viewport->limit = UINT32_MAX; 438 viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM; 439 440 destination = &host->pci.memory; 441 direction = "Outbound"; 442 source = get_system_memory(); 443 444 /* 445 * Configure MemoryRegion implementing CPU -> PCI memory 446 * access 447 */ 448 mem = &viewport->mem; 449 name = designware_pcie_viewport_name(direction, i, "MEM"); 450 memory_region_init_alias(mem, OBJECT(root), name, destination, 451 dummy_offset, dummy_size); 452 memory_region_add_subregion(source, dummy_offset, mem); 453 memory_region_set_enabled(mem, false); 454 g_free(name); 455 456 /* 457 * Configure MemoryRegion implementing access to configuration 458 * space 459 */ 460 mem = &viewport->cfg; 461 name = designware_pcie_viewport_name(direction, i, "CFG"); 462 memory_region_init_io(&viewport->cfg, OBJECT(root), 463 &designware_pci_host_conf_ops, 464 viewport, name, dummy_size); 465 memory_region_add_subregion(source, dummy_offset, mem); 466 memory_region_set_enabled(mem, false); 467 g_free(name); 468 } 469 470 /* 471 * If no inbound iATU windows are configured, HW defaults to 472 * letting inbound TLPs to pass in. We emulate that by exlicitly 473 * configuring first inbound window to cover all of target's 474 * address space. 475 * 476 * NOTE: This will not work correctly for the case when first 477 * configured inbound window is window 0 478 */ 479 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][0]; 480 viewport->cr[1] = DESIGNWARE_PCIE_ATU_ENABLE; 481 designware_pcie_update_viewport(root, viewport); 482 483 memory_region_init_io(&root->msi.iomem, OBJECT(root), 484 &designware_pci_host_msi_ops, 485 root, "pcie-msi", 0x4); 486 /* 487 * We initially place MSI interrupt I/O region a adress 0 and 488 * disable it. It'll be later moved to correct offset and enabled 489 * in designware_pcie_root_update_msi_mapping() as a part of 490 * initialization done by guest OS 491 */ 492 memory_region_add_subregion(address_space, dummy_offset, &root->msi.iomem); 493 memory_region_set_enabled(&root->msi.iomem, false); 494 } 495 496 static void designware_pcie_set_irq(void *opaque, int irq_num, int level) 497 { 498 DesignwarePCIEHost *host = DESIGNWARE_PCIE_HOST(opaque); 499 500 qemu_set_irq(host->pci.irqs[irq_num], level); 501 } 502 503 static const char * 504 designware_pcie_host_root_bus_path(PCIHostState *host_bridge, PCIBus *rootbus) 505 { 506 return "0000:00"; 507 } 508 509 static const VMStateDescription vmstate_designware_pcie_msi_bank = { 510 .name = "designware-pcie-msi-bank", 511 .version_id = 1, 512 .minimum_version_id = 1, 513 .fields = (VMStateField[]) { 514 VMSTATE_UINT32(enable, DesignwarePCIEMSIBank), 515 VMSTATE_UINT32(mask, DesignwarePCIEMSIBank), 516 VMSTATE_UINT32(status, DesignwarePCIEMSIBank), 517 VMSTATE_END_OF_LIST() 518 } 519 }; 520 521 static const VMStateDescription vmstate_designware_pcie_msi = { 522 .name = "designware-pcie-msi", 523 .version_id = 1, 524 .minimum_version_id = 1, 525 .fields = (VMStateField[]) { 526 VMSTATE_UINT64(base, DesignwarePCIEMSI), 527 VMSTATE_STRUCT_ARRAY(intr, 528 DesignwarePCIEMSI, 529 DESIGNWARE_PCIE_NUM_MSI_BANKS, 530 1, 531 vmstate_designware_pcie_msi_bank, 532 DesignwarePCIEMSIBank), 533 VMSTATE_END_OF_LIST() 534 } 535 }; 536 537 static const VMStateDescription vmstate_designware_pcie_viewport = { 538 .name = "designware-pcie-viewport", 539 .version_id = 1, 540 .minimum_version_id = 1, 541 .fields = (VMStateField[]) { 542 VMSTATE_UINT64(base, DesignwarePCIEViewport), 543 VMSTATE_UINT64(target, DesignwarePCIEViewport), 544 VMSTATE_UINT32(limit, DesignwarePCIEViewport), 545 VMSTATE_UINT32_ARRAY(cr, DesignwarePCIEViewport, 2), 546 VMSTATE_END_OF_LIST() 547 } 548 }; 549 550 static const VMStateDescription vmstate_designware_pcie_root = { 551 .name = "designware-pcie-root", 552 .version_id = 1, 553 .minimum_version_id = 1, 554 .fields = (VMStateField[]) { 555 VMSTATE_PCI_DEVICE(parent_obj, PCIBridge), 556 VMSTATE_UINT32(atu_viewport, DesignwarePCIERoot), 557 VMSTATE_STRUCT_2DARRAY(viewports, 558 DesignwarePCIERoot, 559 2, 560 DESIGNWARE_PCIE_NUM_VIEWPORTS, 561 1, 562 vmstate_designware_pcie_viewport, 563 DesignwarePCIEViewport), 564 VMSTATE_STRUCT(msi, 565 DesignwarePCIERoot, 566 1, 567 vmstate_designware_pcie_msi, 568 DesignwarePCIEMSI), 569 VMSTATE_END_OF_LIST() 570 } 571 }; 572 573 static void designware_pcie_root_class_init(ObjectClass *klass, void *data) 574 { 575 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 576 DeviceClass *dc = DEVICE_CLASS(klass); 577 578 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 579 580 k->vendor_id = PCI_VENDOR_ID_SYNOPSYS; 581 k->device_id = 0xABCD; 582 k->revision = 0; 583 k->class_id = PCI_CLASS_BRIDGE_PCI; 584 k->is_bridge = true; 585 k->exit = pci_bridge_exitfn; 586 k->realize = designware_pcie_root_realize; 587 k->config_read = designware_pcie_root_config_read; 588 k->config_write = designware_pcie_root_config_write; 589 590 dc->reset = pci_bridge_reset; 591 /* 592 * PCI-facing part of the host bridge, not usable without the 593 * host-facing part, which can't be device_add'ed, yet. 594 */ 595 dc->user_creatable = false; 596 dc->vmsd = &vmstate_designware_pcie_root; 597 } 598 599 static uint64_t designware_pcie_host_mmio_read(void *opaque, hwaddr addr, 600 unsigned int size) 601 { 602 PCIHostState *pci = PCI_HOST_BRIDGE(opaque); 603 PCIDevice *device = pci_find_device(pci->bus, 0, 0); 604 605 return pci_host_config_read_common(device, 606 addr, 607 pci_config_size(device), 608 size); 609 } 610 611 static void designware_pcie_host_mmio_write(void *opaque, hwaddr addr, 612 uint64_t val, unsigned int size) 613 { 614 PCIHostState *pci = PCI_HOST_BRIDGE(opaque); 615 PCIDevice *device = pci_find_device(pci->bus, 0, 0); 616 617 return pci_host_config_write_common(device, 618 addr, 619 pci_config_size(device), 620 val, size); 621 } 622 623 static const MemoryRegionOps designware_pci_mmio_ops = { 624 .read = designware_pcie_host_mmio_read, 625 .write = designware_pcie_host_mmio_write, 626 .endianness = DEVICE_LITTLE_ENDIAN, 627 .impl = { 628 /* 629 * Our device would not work correctly if the guest was doing 630 * unaligned access. This might not be a limitation on the real 631 * device but in practice there is no reason for a guest to access 632 * this device unaligned. 633 */ 634 .min_access_size = 4, 635 .max_access_size = 4, 636 .unaligned = false, 637 }, 638 }; 639 640 static AddressSpace *designware_pcie_host_set_iommu(PCIBus *bus, void *opaque, 641 int devfn) 642 { 643 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(opaque); 644 645 return &s->pci.address_space; 646 } 647 648 static void designware_pcie_host_realize(DeviceState *dev, Error **errp) 649 { 650 PCIHostState *pci = PCI_HOST_BRIDGE(dev); 651 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(dev); 652 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 653 size_t i; 654 655 for (i = 0; i < ARRAY_SIZE(s->pci.irqs); i++) { 656 sysbus_init_irq(sbd, &s->pci.irqs[i]); 657 } 658 659 memory_region_init_io(&s->mmio, 660 OBJECT(s), 661 &designware_pci_mmio_ops, 662 s, 663 "pcie.reg", 4 * 1024); 664 sysbus_init_mmio(sbd, &s->mmio); 665 666 memory_region_init(&s->pci.io, OBJECT(s), "pcie-pio", 16); 667 memory_region_init(&s->pci.memory, OBJECT(s), 668 "pcie-bus-memory", 669 UINT64_MAX); 670 671 pci->bus = pci_register_root_bus(dev, "pcie", 672 designware_pcie_set_irq, 673 pci_swizzle_map_irq_fn, 674 s, 675 &s->pci.memory, 676 &s->pci.io, 677 0, 4, 678 TYPE_PCIE_BUS); 679 680 memory_region_init(&s->pci.address_space_root, 681 OBJECT(s), 682 "pcie-bus-address-space-root", 683 UINT64_MAX); 684 memory_region_add_subregion(&s->pci.address_space_root, 685 0x0, &s->pci.memory); 686 address_space_init(&s->pci.address_space, 687 &s->pci.address_space_root, 688 "pcie-bus-address-space"); 689 pci_setup_iommu(pci->bus, designware_pcie_host_set_iommu, s); 690 691 qdev_set_parent_bus(DEVICE(&s->root), BUS(pci->bus)); 692 qdev_init_nofail(DEVICE(&s->root)); 693 } 694 695 static const VMStateDescription vmstate_designware_pcie_host = { 696 .name = "designware-pcie-host", 697 .version_id = 1, 698 .minimum_version_id = 1, 699 .fields = (VMStateField[]) { 700 VMSTATE_STRUCT(root, 701 DesignwarePCIEHost, 702 1, 703 vmstate_designware_pcie_root, 704 DesignwarePCIERoot), 705 VMSTATE_END_OF_LIST() 706 } 707 }; 708 709 static void designware_pcie_host_class_init(ObjectClass *klass, void *data) 710 { 711 DeviceClass *dc = DEVICE_CLASS(klass); 712 PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass); 713 714 hc->root_bus_path = designware_pcie_host_root_bus_path; 715 dc->realize = designware_pcie_host_realize; 716 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 717 dc->fw_name = "pci"; 718 dc->vmsd = &vmstate_designware_pcie_host; 719 } 720 721 static void designware_pcie_host_init(Object *obj) 722 { 723 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(obj); 724 DesignwarePCIERoot *root = &s->root; 725 726 object_initialize_child(obj, "root", root, sizeof(*root), 727 TYPE_DESIGNWARE_PCIE_ROOT, &error_abort, NULL); 728 qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0)); 729 qdev_prop_set_bit(DEVICE(root), "multifunction", false); 730 } 731 732 static const TypeInfo designware_pcie_root_info = { 733 .name = TYPE_DESIGNWARE_PCIE_ROOT, 734 .parent = TYPE_PCI_BRIDGE, 735 .instance_size = sizeof(DesignwarePCIERoot), 736 .class_init = designware_pcie_root_class_init, 737 .interfaces = (InterfaceInfo[]) { 738 { INTERFACE_PCIE_DEVICE }, 739 { } 740 }, 741 }; 742 743 static const TypeInfo designware_pcie_host_info = { 744 .name = TYPE_DESIGNWARE_PCIE_HOST, 745 .parent = TYPE_PCI_HOST_BRIDGE, 746 .instance_size = sizeof(DesignwarePCIEHost), 747 .instance_init = designware_pcie_host_init, 748 .class_init = designware_pcie_host_class_init, 749 }; 750 751 static void designware_pcie_register(void) 752 { 753 type_register_static(&designware_pcie_root_info); 754 type_register_static(&designware_pcie_host_info); 755 } 756 type_init(designware_pcie_register) 757