xref: /openbmc/qemu/hw/pci-bridge/simba.c (revision ad1a706f)
1 /*
2  * QEMU Simba PCI bridge
3  *
4  * Copyright (c) 2006 Fabrice Bellard
5  * Copyright (c) 2012,2013 Artyom Tarasenko
6  * Copyright (c) 2018 Mark Cave-Ayland
7  *
8  * Permission is hereby granted, free of charge, to any person obtaining a copy
9  * of this software and associated documentation files (the "Software"), to deal
10  * in the Software without restriction, including without limitation the rights
11  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12  * copies of the Software, and to permit persons to whom the Software is
13  * furnished to do so, subject to the following conditions:
14  *
15  * The above copyright notice and this permission notice shall be included in
16  * all copies or substantial portions of the Software.
17  *
18  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24  * THE SOFTWARE.
25  */
26 
27 #include "qemu/osdep.h"
28 #include "hw/pci/pci.h"
29 #include "hw/pci/pci_bridge.h"
30 #include "hw/pci/pci_bus.h"
31 #include "qemu/module.h"
32 #include "hw/pci-bridge/simba.h"
33 
34 /*
35  * Chipset docs:
36  * APB: "Advanced PCI Bridge (APB) User's Manual",
37  * http://www.sun.com/processors/manuals/805-1251.pdf
38  */
39 
40 static void simba_pci_bridge_realize(PCIDevice *dev, Error **errp)
41 {
42     /*
43      * command register:
44      * According to PCI bridge spec, after reset
45      *   bus master bit is off
46      *   memory space enable bit is off
47      * According to manual (805-1251.pdf).
48      *   the reset value should be zero unless the boot pin is tied high
49      *   (which is true) and thus it should be PCI_COMMAND_MEMORY.
50      */
51     SimbaPCIBridge *br = SIMBA_PCI_BRIDGE(dev);
52 
53     pci_bridge_initfn(dev, TYPE_PCI_BUS);
54 
55     pci_set_word(dev->config + PCI_COMMAND, PCI_COMMAND_MEMORY);
56     pci_set_word(dev->config + PCI_STATUS,
57                  PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ |
58                  PCI_STATUS_DEVSEL_MEDIUM);
59 
60     /* Allow 32-bit IO addresses */
61     pci_set_word(dev->config + PCI_IO_BASE, PCI_IO_RANGE_TYPE_32);
62     pci_set_word(dev->config + PCI_IO_LIMIT, PCI_IO_RANGE_TYPE_32);
63     pci_set_word(dev->wmask + PCI_IO_BASE_UPPER16, 0xffff);
64     pci_set_word(dev->wmask + PCI_IO_LIMIT_UPPER16, 0xffff);
65 
66     pci_bridge_update_mappings(PCI_BRIDGE(br));
67 }
68 
69 static void simba_pci_bridge_class_init(ObjectClass *klass, void *data)
70 {
71     DeviceClass *dc = DEVICE_CLASS(klass);
72     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
73 
74     k->realize = simba_pci_bridge_realize;
75     k->exit = pci_bridge_exitfn;
76     k->vendor_id = PCI_VENDOR_ID_SUN;
77     k->device_id = PCI_DEVICE_ID_SUN_SIMBA;
78     k->revision = 0x11;
79     k->config_write = pci_bridge_write_config;
80     k->is_bridge = true;
81     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
82     dc->reset = pci_bridge_reset;
83     dc->vmsd = &vmstate_pci_device;
84 }
85 
86 static const TypeInfo simba_pci_bridge_info = {
87     .name          = TYPE_SIMBA_PCI_BRIDGE,
88     .parent        = TYPE_PCI_BRIDGE,
89     .class_init    = simba_pci_bridge_class_init,
90     .instance_size = sizeof(SimbaPCIBridge),
91     .interfaces = (InterfaceInfo[]) {
92         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
93         { },
94     },
95 };
96 
97 static void simba_register_types(void)
98 {
99     type_register_static(&simba_pci_bridge_info);
100 }
101 
102 type_init(simba_register_types)
103