xref: /openbmc/qemu/hw/net/igb_regs.h (revision 2e1cacfb)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * This is copied + edited from kernel header files in
4  * drivers/net/ethernet/intel/igb
5  */
6 
7 #ifndef HW_IGB_REGS_H_
8 #define HW_IGB_REGS_H_
9 
10 #include "e1000x_regs.h"
11 
12 /* from igb/e1000_hw.h */
13 
14 #define E1000_DEV_ID_82576                 0x10C9
15 #define E1000_DEV_ID_82576_FIBER           0x10E6
16 #define E1000_DEV_ID_82576_SERDES          0x10E7
17 #define E1000_DEV_ID_82576_QUAD_COPPER             0x10E8
18 #define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526
19 #define E1000_DEV_ID_82576_NS                      0x150A
20 #define E1000_DEV_ID_82576_NS_SERDES               0x1518
21 #define E1000_DEV_ID_82576_SERDES_QUAD             0x150D
22 
23 /* Context Descriptor */
24 struct e1000_adv_tx_context_desc {
25     uint32_t vlan_macip_lens;
26     uint32_t seqnum_seed;
27     uint32_t type_tucmd_mlhl;
28     uint32_t mss_l4len_idx;
29 };
30 
31 /* Advanced Transmit Descriptor */
32 union e1000_adv_tx_desc {
33     struct {
34         uint64_t buffer_addr;     /* Address of descriptor's data buffer */
35         uint32_t cmd_type_len;
36         uint32_t olinfo_status;
37     } read;
38     struct {
39         uint64_t rsvd;            /* Reserved */
40         uint32_t nxtseq_seed;
41         uint32_t status;
42     } wb;
43 };
44 
45 #define E1000_ADVTXD_POTS_IXSM  0x00000100 /* Insert TCP/UDP Checksum */
46 #define E1000_ADVTXD_POTS_TXSM  0x00000200 /* Insert TCP/UDP Checksum */
47 
48 #define E1000_TXD_POPTS_IXSM 0x00000001 /* Insert IP checksum */
49 #define E1000_TXD_POPTS_TXSM 0x00000002 /* Insert TCP/UDP checksum */
50 
51 /* Receive Descriptor - Advanced */
52 union e1000_adv_rx_desc {
53     struct {
54         uint64_t pkt_addr;                /* Packet Buffer Address */
55         uint64_t hdr_addr;                /* Header Buffer Address */
56     } read;
57     struct {
58         struct {
59             struct {
60                 uint16_t pkt_info;        /* RSS Type, Packet Type */
61                 uint16_t hdr_info;        /* Split Head, Buffer Length */
62             } lo_dword;
63             union {
64                 uint32_t rss;             /* RSS Hash */
65                 struct {
66                         uint16_t ip_id;   /* IP Id */
67                         uint16_t csum;    /* Packet Checksum */
68                 } csum_ip;
69             } hi_dword;
70         } lower;
71         struct {
72             uint32_t status_error;        /* Ext Status/Error */
73             uint16_t length;              /* Packet Length */
74             uint16_t vlan;                /* VLAN tag */
75         } upper;
76     } wb;  /* writeback */
77 };
78 
79 /* from igb/e1000_phy.h */
80 
81 /* IGP01E1000 Specific Registers */
82 #define IGP01E1000_PHY_PORT_CONFIG        0x10 /* Port Config */
83 #define IGP01E1000_PHY_PORT_STATUS        0x11 /* Status */
84 #define IGP01E1000_PHY_PORT_CTRL          0x12 /* Control */
85 #define IGP01E1000_PHY_LINK_HEALTH        0x13 /* PHY Link Health */
86 #define IGP02E1000_PHY_POWER_MGMT         0x19 /* Power Management */
87 #define IGP01E1000_PHY_PAGE_SELECT        0x1F /* Page Select */
88 #define IGP01E1000_PHY_PCS_INIT_REG       0x00B4
89 #define IGP01E1000_PHY_POLARITY_MASK      0x0078
90 #define IGP01E1000_PSCR_AUTO_MDIX         0x1000
91 #define IGP01E1000_PSCR_FORCE_MDI_MDIX    0x2000 /* 0=MDI, 1=MDIX */
92 #define IGP01E1000_PSCFR_SMART_SPEED      0x0080
93 
94 /* Enable flexible speed on link-up */
95 #define IGP02E1000_PM_D0_LPLU             0x0002 /* For D0a states */
96 #define IGP02E1000_PM_D3_LPLU             0x0004 /* For all other states */
97 #define IGP01E1000_PLHR_SS_DOWNGRADE      0x8000
98 #define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
99 #define IGP01E1000_PSSR_MDIX              0x0800
100 #define IGP01E1000_PSSR_SPEED_MASK        0xC000
101 #define IGP01E1000_PSSR_SPEED_1000MBPS    0xC000
102 #define IGP02E1000_PHY_CHANNEL_NUM        4
103 #define IGP02E1000_PHY_AGC_A              0x11B1
104 #define IGP02E1000_PHY_AGC_B              0x12B1
105 #define IGP02E1000_PHY_AGC_C              0x14B1
106 #define IGP02E1000_PHY_AGC_D              0x18B1
107 #define IGP02E1000_AGC_LENGTH_SHIFT       9   /* Course - 15:13, Fine - 12:9 */
108 #define IGP02E1000_AGC_LENGTH_MASK        0x7F
109 #define IGP02E1000_AGC_RANGE              15
110 
111 /* from igb/igb.h */
112 
113 #define E1000_PCS_CFG_IGN_SD     1
114 
115 /* Interrupt defines */
116 #define IGB_START_ITR            648 /* ~6000 ints/sec */
117 #define IGB_4K_ITR               980
118 #define IGB_20K_ITR              196
119 #define IGB_70K_ITR              56
120 
121 /* TX/RX descriptor defines */
122 #define IGB_DEFAULT_TXD          256
123 #define IGB_DEFAULT_TX_WORK      128
124 #define IGB_MIN_TXD              80
125 #define IGB_MAX_TXD              4096
126 
127 #define IGB_DEFAULT_RXD          256
128 #define IGB_MIN_RXD              80
129 #define IGB_MAX_RXD              4096
130 
131 #define IGB_DEFAULT_ITR           3 /* dynamic */
132 #define IGB_MAX_ITR_USECS         10000
133 #define IGB_MIN_ITR_USECS         10
134 #define NON_Q_VECTORS             1
135 #define MAX_Q_VECTORS             8
136 #define MAX_MSIX_ENTRIES          10
137 
138 /* Transmit and receive queues */
139 #define IGB_MAX_RX_QUEUES          8
140 #define IGB_MAX_RX_QUEUES_82575    4
141 #define IGB_MAX_RX_QUEUES_I211     2
142 #define IGB_MAX_TX_QUEUES          8
143 #define IGB_MAX_VF_MC_ENTRIES      30
144 #define IGB_MAX_VF_FUNCTIONS       8
145 #define IGB_MAX_VFTA_ENTRIES       128
146 #define IGB_82576_VF_DEV_ID        0x10CA
147 #define IGB_I350_VF_DEV_ID         0x1520
148 
149 /* VLAN info */
150 #define IGB_TX_FLAGS_VLAN_MASK     0xffff0000
151 #define IGB_TX_FLAGS_VLAN_SHIFT    16
152 
153 /* from igb/e1000_82575.h */
154 
155 #define E1000_MRQC_ENABLE_RSS_MQ            0x00000002
156 #define E1000_MRQC_ENABLE_VMDQ              0x00000003
157 #define E1000_MRQC_RSS_FIELD_IPV4_UDP       0x00400000
158 #define E1000_MRQC_ENABLE_VMDQ_RSS_MQ       0x00000005
159 #define E1000_MRQC_RSS_FIELD_IPV6_UDP       0x00800000
160 #define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX    0x01000000
161 
162 /* Adv Transmit Descriptor Config Masks */
163 #define E1000_ADVTXD_MAC_TSTAMP   0x00080000 /* IEEE1588 Timestamp packet */
164 #define E1000_ADVTXD_DTYP_CTXT    0x00200000 /* Advanced Context Descriptor */
165 #define E1000_ADVTXD_DTYP_DATA    0x00300000 /* Advanced Data Descriptor */
166 #define E1000_ADVTXD_DCMD_EOP     0x01000000 /* End of Packet */
167 #define E1000_ADVTXD_DCMD_IFCS    0x02000000 /* Insert FCS (Ethernet CRC) */
168 #define E1000_ADVTXD_DCMD_RS      0x08000000 /* Report Status */
169 #define E1000_ADVTXD_DCMD_DEXT    0x20000000 /* Descriptor extension (1=Adv) */
170 #define E1000_ADVTXD_DCMD_VLE     0x40000000 /* VLAN pkt enable */
171 #define E1000_ADVTXD_DCMD_TSE     0x80000000 /* TCP Seg enable */
172 #define E1000_ADVTXD_PAYLEN_SHIFT    14 /* Adv desc PAYLEN shift */
173 
174 #define E1000_ADVTXD_MACLEN_SHIFT    9  /* Adv ctxt desc mac len shift */
175 #define E1000_ADVTXD_TUCMD_L4T_UDP 0x00000000  /* L4 Packet TYPE of UDP */
176 #define E1000_ADVTXD_TUCMD_IPV4    0x00000400  /* IP Packet Type: 1=IPv4 */
177 #define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800  /* L4 Packet TYPE of TCP */
178 #define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 packet TYPE of SCTP */
179 /* IPSec Encrypt Enable for ESP */
180 #define E1000_ADVTXD_L4LEN_SHIFT     8  /* Adv ctxt L4LEN shift */
181 #define E1000_ADVTXD_MSS_SHIFT      16  /* Adv ctxt MSS shift */
182 /* Adv ctxt IPSec SA IDX mask */
183 /* Adv ctxt IPSec ESP len mask */
184 
185 /* Additional Transmit Descriptor Control definitions */
186 #define E1000_TXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Tx Queue */
187 
188 /* Additional Receive Descriptor Control definitions */
189 #define E1000_RXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Rx Queue */
190 
191 /* Direct Cache Access (DCA) definitions */
192 #define E1000_DCA_CTRL_DCA_MODE_DISABLE 0x01 /* DCA Disable */
193 #define E1000_DCA_CTRL_DCA_MODE_CB2     0x02 /* DCA Mode CB2 */
194 
195 #define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
196 #define E1000_DCA_RXCTRL_DESC_DCA_EN BIT(5) /* DCA Rx Desc enable */
197 #define E1000_DCA_RXCTRL_HEAD_DCA_EN BIT(6) /* DCA Rx Desc header enable */
198 #define E1000_DCA_RXCTRL_DATA_DCA_EN BIT(7) /* DCA Rx Desc payload enable */
199 #define E1000_DCA_RXCTRL_DESC_RRO_EN BIT(9) /* DCA Rx rd Desc Relax Order */
200 
201 #define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
202 #define E1000_DCA_TXCTRL_DESC_DCA_EN BIT(5) /* DCA Tx Desc enable */
203 #define E1000_DCA_TXCTRL_DESC_RRO_EN BIT(9) /* Tx rd Desc Relax Order */
204 #define E1000_DCA_TXCTRL_TX_WB_RO_EN BIT(11) /* Tx Desc writeback RO bit */
205 #define E1000_DCA_TXCTRL_DATA_RRO_EN BIT(13) /* Tx rd data Relax Order */
206 
207 /* Additional DCA related definitions, note change in position of CPUID */
208 #define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */
209 #define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */
210 #define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */
211 #define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */
212 
213 /* ETQF register bit definitions */
214 #define E1000_ETQF_FILTER_ENABLE   BIT(26)
215 #define E1000_ETQF_1588            BIT(30)
216 #define E1000_ETQF_IMM_INT         BIT(29)
217 #define E1000_ETQF_QUEUE_ENABLE    BIT(31)
218 #define E1000_ETQF_QUEUE_SHIFT     16
219 #define E1000_ETQF_QUEUE_MASK      0x00070000
220 #define E1000_ETQF_ETYPE_MASK      0x0000FFFF
221 
222 #define E1000_DTXSWC_MAC_SPOOF_MASK   0x000000FF /* Per VF MAC spoof control */
223 #define E1000_DTXSWC_VLAN_SPOOF_MASK  0x0000FF00 /* Per VF VLAN spoof control */
224 #define E1000_DTXSWC_LLE_MASK         0x00FF0000 /* Per VF Local LB enables */
225 #define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8
226 #define E1000_DTXSWC_VMDQ_LOOPBACK_EN BIT(31)  /* global VF LB enable */
227 
228 /* Easy defines for setting default pool, would normally be left a zero */
229 #define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7
230 #define E1000_VT_CTL_DEFAULT_POOL_MASK  (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT)
231 
232 /* Other useful VMD_CTL register defines */
233 #define E1000_VT_CTL_IGNORE_MAC         BIT(28)
234 #define E1000_VT_CTL_DISABLE_DEF_POOL   BIT(29)
235 #define E1000_VT_CTL_VM_REPL_EN         BIT(30)
236 
237 /* Per VM Offload register setup */
238 #define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */
239 #define E1000_VMOLR_LPE        0x00010000 /* Accept Long packet */
240 #define E1000_VMOLR_RSSE       0x00020000 /* Enable RSS */
241 #define E1000_VMOLR_AUPE       0x01000000 /* Accept untagged packets */
242 #define E1000_VMOLR_ROMPE      0x02000000 /* Accept overflow multicast */
243 #define E1000_VMOLR_ROPE       0x04000000 /* Accept overflow unicast */
244 #define E1000_VMOLR_BAM        0x08000000 /* Accept Broadcast packets */
245 #define E1000_VMOLR_MPME       0x10000000 /* Multicast promiscuous mode */
246 #define E1000_VMOLR_STRVLAN    0x40000000 /* Vlan stripping enable */
247 #define E1000_VMOLR_STRCRC     0x80000000 /* CRC stripping enable */
248 
249 #define E1000_DVMOLR_HIDEVLAN  0x20000000 /* Hide vlan enable */
250 #define E1000_DVMOLR_STRVLAN   0x40000000 /* Vlan stripping enable */
251 #define E1000_DVMOLR_STRCRC    0x80000000 /* CRC stripping enable */
252 
253 #define E1000_VLVF_ARRAY_SIZE     32
254 #define E1000_VLVF_VLANID_MASK    0x00000FFF
255 #define E1000_VLVF_POOLSEL_SHIFT  12
256 #define E1000_VLVF_POOLSEL_MASK   (0xFF << E1000_VLVF_POOLSEL_SHIFT)
257 #define E1000_VLVF_LVLAN          0x00100000
258 #define E1000_VLVF_VLANID_ENABLE  0x80000000
259 
260 #define E1000_VMVIR_VLANA_DEFAULT      0x40000000 /* Always use default VLAN */
261 #define E1000_VMVIR_VLANA_NEVER        0x80000000 /* Never insert VLAN tag */
262 
263 #define E1000_IOVCTL 0x05BBC
264 #define E1000_IOVCTL_REUSE_VFQ 0x00000001
265 
266 #define E1000_RPLOLR_STRVLAN   0x40000000
267 #define E1000_RPLOLR_STRCRC    0x80000000
268 
269 #define E1000_DTXCTL_8023LL     0x0004
270 #define E1000_DTXCTL_VLAN_ADDED 0x0008
271 #define E1000_DTXCTL_OOS_ENABLE 0x0010
272 #define E1000_DTXCTL_MDP_EN     0x0020
273 #define E1000_DTXCTL_SPOOF_INT  0x0040
274 
275 /* from igb/e1000_defines.h */
276 
277 /* Physical Func Reset Done Indication */
278 #define E1000_CTRL_EXT_PFRSTD   0x00004000
279 
280 #define E1000_IVAR_VALID     0x80
281 #define E1000_GPIE_NSICR     0x00000001
282 #define E1000_GPIE_MSIX_MODE 0x00000010
283 #define E1000_GPIE_EIAME     0x40000000
284 #define E1000_GPIE_PBA       0x80000000
285 
286 /* Transmit Control */
287 #define E1000_TCTL_EN     0x00000002    /* enable tx */
288 #define E1000_TCTL_PSP    0x00000008    /* pad short packets */
289 #define E1000_TCTL_CT     0x00000ff0    /* collision threshold */
290 #define E1000_TCTL_COLD   0x003ff000    /* collision distance */
291 #define E1000_TCTL_RTLC   0x01000000    /* Re-transmit on late collision */
292 
293 /* Collision related configuration parameters */
294 #define E1000_COLLISION_THRESHOLD       15
295 #define E1000_CT_SHIFT                  4
296 #define E1000_COLLISION_DISTANCE        63
297 #define E1000_COLD_SHIFT                12
298 
299 #define E1000_RAH_POOL_MASK 0x03FC0000
300 #define E1000_RAH_POOL_1 0x00040000
301 
302 #define E1000_ICR_VMMB         0x00000100 /* VM MB event */
303 #define E1000_ICR_TS           0x00080000 /* Time Sync Interrupt */
304 #define E1000_ICR_DRSTA        0x40000000 /* Device Reset Asserted */
305 /* If this bit asserted, the driver should claim the interrupt */
306 #define E1000_ICR_INT_ASSERTED 0x80000000
307 /* LAN connected device generates an interrupt */
308 #define E1000_ICR_DOUTSYNC     0x10000000 /* NIC DMA out of sync */
309 
310 /* Extended Interrupt Cause Read */
311 #define E1000_EICR_RX_QUEUE0    0x00000001 /* Rx Queue 0 Interrupt */
312 #define E1000_EICR_RX_QUEUE1    0x00000002 /* Rx Queue 1 Interrupt */
313 #define E1000_EICR_RX_QUEUE2    0x00000004 /* Rx Queue 2 Interrupt */
314 #define E1000_EICR_RX_QUEUE3    0x00000008 /* Rx Queue 3 Interrupt */
315 #define E1000_EICR_TX_QUEUE0    0x00000100 /* Tx Queue 0 Interrupt */
316 #define E1000_EICR_TX_QUEUE1    0x00000200 /* Tx Queue 1 Interrupt */
317 #define E1000_EICR_TX_QUEUE2    0x00000400 /* Tx Queue 2 Interrupt */
318 #define E1000_EICR_TX_QUEUE3    0x00000800 /* Tx Queue 3 Interrupt */
319 #define E1000_EICR_OTHER        0x80000000 /* Interrupt Cause Active */
320 
321 /* Extended Interrupt Cause Set */
322 /* E1000_EITR_CNT_IGNR is only for 82576 and newer */
323 #define E1000_EITR_CNT_IGNR     0x80000000 /* Don't reset counters on write */
324 
325 #define E1000_TSYNCTXCTL_VALID    0x00000001 /* tx timestamp valid */
326 #define E1000_TSYNCTXCTL_ENABLED  0x00000010 /* enable tx timestampping */
327 
328 /* PCI Express Control */
329 #define E1000_GCR_CMPL_TMOUT_MASK       0x0000F000
330 #define E1000_GCR_CMPL_TMOUT_10ms       0x00001000
331 #define E1000_GCR_CMPL_TMOUT_RESEND     0x00010000
332 #define E1000_GCR_CAP_VER2              0x00040000
333 
334 #define PHY_REVISION_MASK      0xFFFFFFF0
335 #define MAX_PHY_REG_ADDRESS    0x1F  /* 5 bit address bus (0-0x1F) */
336 #define MAX_PHY_MULTI_PAGE_REG 0xF
337 
338 #define IGP03E1000_E_PHY_ID 0x02A80390
339 
340 /* from igb/e1000_mbox.h */
341 
342 #define E1000_P2VMAILBOX_STS  0x00000001 /* Initiate message send to VF */
343 #define E1000_P2VMAILBOX_ACK  0x00000002 /* Ack message recv'd from VF */
344 #define E1000_P2VMAILBOX_VFU  0x00000004 /* VF owns the mailbox buffer */
345 #define E1000_P2VMAILBOX_PFU  0x00000008 /* PF owns the mailbox buffer */
346 #define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
347 
348 #define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
349 #define E1000_MBVFICR_VFREQ_VF1  0x00000001 /* bit for VF 1 message */
350 #define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
351 #define E1000_MBVFICR_VFACK_VF1  0x00010000 /* bit for VF 1 ack */
352 
353 #define E1000_V2PMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
354 
355 /*
356  * If it's a E1000_VF_* msg then it originates in the VF and is sent to the
357  * PF.  The reverse is true if it is E1000_PF_*.
358  * Message ACK's are the value or'd with 0xF0000000
359  */
360 /* Messages below or'd with this are the ACK */
361 #define E1000_VT_MSGTYPE_ACK 0x80000000
362 /* Messages below or'd with this are the NACK */
363 #define E1000_VT_MSGTYPE_NACK 0x40000000
364 /* Indicates that VF is still clear to send requests */
365 #define E1000_VT_MSGTYPE_CTS 0x20000000
366 #define E1000_VT_MSGINFO_SHIFT 16
367 /* bits 23:16 are used for extra info for certain messages */
368 #define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
369 
370 #define E1000_VF_RESET                 0x01 /* VF requests reset */
371 #define E1000_VF_SET_MAC_ADDR          0x02 /* VF requests to set MAC addr */
372 /* VF requests to clear all unicast MAC filters */
373 #define E1000_VF_MAC_FILTER_CLR        (0x01 << E1000_VT_MSGINFO_SHIFT)
374 /* VF requests to add unicast MAC filter */
375 #define E1000_VF_MAC_FILTER_ADD        (0x02 << E1000_VT_MSGINFO_SHIFT)
376 #define E1000_VF_SET_MULTICAST         0x03 /* VF requests to set MC addr */
377 #define E1000_VF_SET_VLAN              0x04 /* VF requests to set VLAN */
378 #define E1000_VF_SET_LPE               0x05 /* VF requests to set VMOLR.LPE */
379 #define E1000_VF_SET_PROMISC           0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
380 #define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT)
381 
382 #define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
383 
384 /* from igb/e1000_regs.h */
385 
386 #define E1000_EICR      0x01580  /* Ext. Interrupt Cause Read - R/clr */
387 #define E1000_EITR(_n)  (0x01680 + (0x4 * (_n)))
388 #define E1000_EICS      0x01520  /* Ext. Interrupt Cause Set - W0 */
389 #define E1000_EIMS      0x01524  /* Ext. Interrupt Mask Set/Read - RW */
390 #define E1000_EIMC      0x01528  /* Ext. Interrupt Mask Clear - WO */
391 #define E1000_EIAC      0x0152C  /* Ext. Interrupt Auto Clear - RW */
392 #define E1000_EIAM      0x01530  /* Ext. Interrupt Ack Auto Clear Mask - RW */
393 #define E1000_GPIE      0x01514  /* General Purpose Interrupt Enable; RW */
394 #define E1000_IVAR0     0x01700  /* Interrupt Vector Allocation Register - RW */
395 #define E1000_IVAR_MISC 0x01740  /* Interrupt Vector Allocation Register (last) - RW */
396 #define E1000_FRTIMER   0x01048  /* Free Running Timer - RW */
397 #define E1000_FCRTV     0x02460  /* Flow Control Refresh Timer Value - RW */
398 
399 #define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */
400 
401 /* Filtering Registers */
402 #define E1000_SAQF(_n) (0x5980 + 4 * (_n))
403 #define E1000_DAQF(_n) (0x59A0 + 4 * (_n))
404 #define E1000_SPQF(_n) (0x59C0 + 4 * (_n))
405 #define E1000_FTQF(_n) (0x59E0 + 4 * (_n))
406 #define E1000_SAQF0 E1000_SAQF(0)
407 #define E1000_DAQF0 E1000_DAQF(0)
408 #define E1000_SPQF0 E1000_SPQF(0)
409 #define E1000_FTQF0 E1000_FTQF(0)
410 #define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */
411 #define E1000_ETQF(_n)  (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
412 
413 #define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
414 
415 #define E1000_RXPBS 0x02404  /* Rx Packet Buffer Size - RW */
416 #define E1000_TXPBS 0x03404  /* Tx Packet Buffer Size - RW */
417 
418 #define E1000_DTXCTL 0x03590  /* DMA TX Control - RW */
419 
420 #define E1000_HTCBDPC     0x04124  /* Host TX Circuit Breaker Dropped Count */
421 #define E1000_RLPML       0x05004  /* RX Long Packet Max Length */
422 #define E1000_RA2         0x054E0  /* 2nd half of Rx address array - RW Array */
423 #define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
424 #define E1000_VT_CTL   0x0581C  /* VMDq Control - RW */
425 
426 /* VT Registers */
427 #define E1000_MBVFICR   0x00C80 /* Mailbox VF Cause - RWC */
428 #define E1000_MBVFIMR   0x00C84 /* Mailbox VF int Mask - RW */
429 #define E1000_VFLRE     0x00C88 /* VF Register Events - RWC */
430 #define E1000_VFRE      0x00C8C /* VF Receive Enables */
431 #define E1000_VFTE      0x00C90 /* VF Transmit Enables */
432 #define E1000_QDE       0x02408 /* Queue Drop Enable - RW */
433 #define E1000_DTXSWC    0x03500 /* DMA Tx Switch Control - RW */
434 #define E1000_WVBR      0x03554 /* VM Wrong Behavior - RWS */
435 #define E1000_RPLOLR    0x05AF0 /* Replication Offload - RW */
436 #define E1000_UTA       0x0A000 /* Unicast Table Array - RW */
437 #define E1000_IOVTCL    0x05BBC /* IOV Control Register */
438 #define E1000_TXSWC     0x05ACC /* Tx Switch Control */
439 #define E1000_LVMMC     0x03548 /* Last VM Misbehavior cause */
440 /* These act per VF so an array friendly macro is used */
441 #define E1000_P2VMAILBOX(_n)   (0x00C00 + (4 * (_n)))
442 #define E1000_VMBMEM(_n)       (0x00800 + (64 * (_n)))
443 #define E1000_VMOLR(_n)        (0x05AD0 + (4 * (_n)))
444 #define E1000_DVMOLR(_n)       (0x0C038 + (64 * (_n)))
445 #define E1000_VLVF(_n)         (0x05D00 + (4 * (_n))) /* VLAN VM Filter */
446 #define E1000_VMVIR(_n)        (0x03700 + (4 * (_n)))
447 
448 /* from igbvf/defines.h */
449 
450 /* SRRCTL bit definitions */
451 #define E1000_SRRCTL_BSIZEPKT_SHIFT            10 /* Shift _right_ */
452 #define E1000_SRRCTL_BSIZEHDRSIZE_MASK         0x00000F00
453 #define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT        2  /* Shift _left_ */
454 #define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF       0x02000000
455 #define E1000_SRRCTL_DESCTYPE_HDR_SPLIT        0x04000000
456 #define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
457 #define E1000_SRRCTL_DESCTYPE_MASK             0x0E000000
458 #define E1000_SRRCTL_DROP_EN                   0x80000000
459 
460 #define E1000_SRRCTL_BSIZEPKT_MASK             0x0000007F
461 #define E1000_SRRCTL_BSIZEHDR_MASK             0x00003F00
462 
463 /* from igbvf/mbox.h */
464 
465 #define E1000_V2PMAILBOX_REQ      0x00000001 /* Request for PF Ready bit */
466 #define E1000_V2PMAILBOX_ACK      0x00000002 /* Ack PF message received */
467 #define E1000_V2PMAILBOX_VFU      0x00000004 /* VF owns the mailbox buffer */
468 #define E1000_V2PMAILBOX_PFU      0x00000008 /* PF owns the mailbox buffer */
469 #define E1000_V2PMAILBOX_PFSTS    0x00000010 /* PF wrote a message in the MB */
470 #define E1000_V2PMAILBOX_PFACK    0x00000020 /* PF ack the previous VF msg */
471 #define E1000_V2PMAILBOX_RSTI     0x00000040 /* PF has reset indication */
472 #define E1000_V2PMAILBOX_RSTD     0x00000080 /* PF has indicated reset done */
473 #define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
474 
475 #define E1000_VFMAILBOX_SIZE      16 /* 16 32 bit words - 64 bytes */
476 
477 /*
478  * If it's a E1000_VF_* msg then it originates in the VF and is sent to the
479  * PF.  The reverse is true if it is E1000_PF_*.
480  * Message ACK's are the value or'd with 0xF0000000
481  */
482 /* Messages below or'd with this are the ACK */
483 #define E1000_VT_MSGTYPE_ACK      0x80000000
484 /* Messages below or'd with this are the NACK */
485 #define E1000_VT_MSGTYPE_NACK     0x40000000
486 /* Indicates that VF is still clear to send requests */
487 #define E1000_VT_MSGTYPE_CTS      0x20000000
488 
489 /* We have a total wait time of 1s for vf mailbox posted messages */
490 #define E1000_VF_MBX_INIT_TIMEOUT 2000 /* retry count for mbx timeout */
491 #define E1000_VF_MBX_INIT_DELAY   500  /* usec delay between retries */
492 
493 #define E1000_VT_MSGINFO_SHIFT    16
494 /* bits 23:16 are used for extra info for certain messages */
495 #define E1000_VT_MSGINFO_MASK     (0xFF << E1000_VT_MSGINFO_SHIFT)
496 
497 #define E1000_VF_RESET            0x01 /* VF requests reset */
498 #define E1000_VF_SET_MAC_ADDR     0x02 /* VF requests PF to set MAC addr */
499 /* VF requests PF to clear all unicast MAC filters */
500 #define E1000_VF_MAC_FILTER_CLR   (0x01 << E1000_VT_MSGINFO_SHIFT)
501 /* VF requests PF to add unicast MAC filter */
502 #define E1000_VF_MAC_FILTER_ADD   (0x02 << E1000_VT_MSGINFO_SHIFT)
503 #define E1000_VF_SET_MULTICAST    0x03 /* VF requests PF to set MC addr */
504 #define E1000_VF_SET_VLAN         0x04 /* VF requests PF to set VLAN */
505 #define E1000_VF_SET_LPE          0x05 /* VF requests PF to set VMOLR.LPE */
506 
507 #define E1000_PF_CONTROL_MSG      0x0100 /* PF control message */
508 
509 /* from igbvf/regs.h */
510 
511 /* Statistics registers */
512 #define E1000_VFGPRC   0x00F10
513 #define E1000_VFGORC   0x00F18
514 #define E1000_VFMPRC   0x00F3C
515 #define E1000_VFGPTC   0x00F14
516 #define E1000_VFGOTC   0x00F34
517 #define E1000_VFGOTLBC 0x00F50
518 #define E1000_VFGPTLBC 0x00F44
519 #define E1000_VFGORLBC 0x00F48
520 #define E1000_VFGPRLBC 0x00F40
521 
522 /* These act per VF so an array friendly macro is used */
523 #define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n)))
524 #define E1000_VMBMEM(_n)     (0x00800 + (64 * (_n)))
525 
526 /* from igbvf/vf.h */
527 
528 #define E1000_DEV_ID_82576_VF 0x10CA
529 
530 /* new */
531 
532 /* Receive Registers */
533 
534 /* RX Descriptor Base Low; RW */
535 #define E1000_RDBAL(_n)    (0x0C000 + (0x40  * (_n)))
536 #define E1000_RDBAL_A(_n)  (0x02800 + (0x100 * (_n)))
537 
538 /* RX Descriptor Base High; RW */
539 #define E1000_RDBAH(_n)    (0x0C004 + (0x40  * (_n)))
540 #define E1000_RDBAH_A(_n)  (0x02804 + (0x100 * (_n)))
541 
542 /* RX Descriptor Ring Length; RW */
543 #define E1000_RDLEN(_n)    (0x0C008 + (0x40  * (_n)))
544 #define E1000_RDLEN_A(_n)  (0x02808 + (0x100 * (_n)))
545 
546 /* Split and Replication Receive Control; RW */
547 #define E1000_SRRCTL(_n)   (0x0C00C + (0x40  * (_n)))
548 #define E1000_SRRCTL_A(_n) (0x0280C + (0x100 * (_n)))
549 
550 /* RX Descriptor Head; RW */
551 #define E1000_RDH(_n)      (0x0C010 + (0x40  * (_n)))
552 #define E1000_RDH_A(_n)    (0x02810 + (0x100 * (_n)))
553 
554 /* RX DCA Control; RW */
555 #define E1000_RXCTL(_n)    (0x0C014 + (0x40  * (_n)))
556 #define E1000_RXCTL_A(_n)  (0x02814 + (0x100 * (_n)))
557 
558 /* RX Descriptor Tail; RW */
559 #define E1000_RDT(_n)      (0x0C018 + (0x40  * (_n)))
560 #define E1000_RDT_A(_n)    (0x02818 + (0x100 * (_n)))
561 
562 /* RX Descriptor Control; RW */
563 #define E1000_RXDCTL(_n)   (0x0C028 + (0x40  * (_n)))
564 #define E1000_RXDCTL_A(_n) (0x02828 + (0x100 * (_n)))
565 
566 /* RX Queue Drop Packet Count; RC */
567 #define E1000_RQDPC_A(_n)  (0x02830 + (0x100 * (_n)))
568 
569 /* Transmit Registers */
570 
571 /* TX Descriptor Base Low; RW */
572 #define E1000_TDBAL(_n)    (0x0E000 + (0x40  * (_n)))
573 #define E1000_TDBAL_A(_n)  (0x03800 + (0x100 * (_n)))
574 
575 /* TX Descriptor Base High; RW */
576 #define E1000_TDBAH(_n)    (0x0E004 + (0x40  * (_n)))
577 #define E1000_TDBAH_A(_n)  (0x03804 + (0x100 * (_n)))
578 
579 /* TX Descriptor Ring Length; RW */
580 #define E1000_TDLEN(_n)    (0x0E008 + (0x40  * (_n)))
581 #define E1000_TDLEN_A(_n)  (0x03808 + (0x100 * (_n)))
582 
583 /* TX Descriptor Head; RW */
584 #define E1000_TDH(_n)      (0x0E010 + (0x40  * (_n)))
585 #define E1000_TDH_A(_n)    (0x03810 + (0x100 * (_n)))
586 
587 /* TX DCA Control; RW */
588 #define E1000_TXCTL(_n)    (0x0E014 + (0x40  * (_n)))
589 #define E1000_TXCTL_A(_n)  (0x03814 + (0x100 * (_n)))
590 
591 /* TX Descriptor Tail; RW */
592 #define E1000_TDT(_n)      (0x0E018 + (0x40  * (_n)))
593 #define E1000_TDT_A(_n)    (0x03818 + (0x100 * (_n)))
594 
595 /* TX Descriptor Control; RW */
596 #define E1000_TXDCTL(_n)   (0x0E028 + (0x40  * (_n)))
597 #define E1000_TXDCTL_A(_n) (0x03828 + (0x100 * (_n)))
598 
599 /* TX Descriptor Completion Write–Back Address Low; RW */
600 #define E1000_TDWBAL(_n)   (0x0E038 + (0x40  * (_n)))
601 #define E1000_TDWBAL_A(_n) (0x03838 + (0x100 * (_n)))
602 
603 /* TX Descriptor Completion Write–Back Address High; RW */
604 #define E1000_TDWBAH(_n)   (0x0E03C + (0x40  * (_n)))
605 #define E1000_TDWBAH_A(_n) (0x0383C + (0x100 * (_n)))
606 
607 #define E1000_MTA_A        0x0200
608 
609 #define E1000_XDBAL_MASK (~(BIT(5) - 1)) /* TDBAL and RDBAL Registers Mask */
610 
611 #define E1000_ICR_MACSEC   0x00000020 /* MACSec */
612 #define E1000_ICR_RX0      0x00000040 /* Receiver Overrun */
613 #define E1000_ICR_GPI_SDP0 0x00000800 /* General Purpose, SDP0 pin */
614 #define E1000_ICR_GPI_SDP1 0x00001000 /* General Purpose, SDP1 pin */
615 #define E1000_ICR_GPI_SDP2 0x00002000 /* General Purpose, SDP2 pin */
616 #define E1000_ICR_GPI_SDP3 0x00004000 /* General Purpose, SDP3 pin */
617 #define E1000_ICR_PTRAP    0x00008000 /* Probe Trap */
618 #define E1000_ICR_MNG      0x00040000 /* Management Event */
619 #define E1000_ICR_OMED     0x00100000 /* Other Media Energy Detected */
620 #define E1000_ICR_FER      0x00400000 /* Fatal Error */
621 #define E1000_ICR_NFER     0x00800000 /* Non Fatal Error */
622 #define E1000_ICR_CSRTO    0x01000000 /* CSR access Time Out Indication */
623 #define E1000_ICR_SCE      0x02000000 /* Storm Control Event */
624 #define E1000_ICR_SW_WD    0x04000000 /* Software Watchdog */
625 
626 /* Extended Interrupts */
627 
628 #define E1000_EICR_MSIX_MASK   0x01FFFFFF /* Bits used in MSI-X mode */
629 #define E1000_EICR_LEGACY_MASK 0x4000FFFF /* Bits used in non MSI-X mode */
630 
631 /* Mirror VF Control (only RST bit); RW */
632 #define E1000_PVTCTRL(_n) (0x10000 + (_n) * 0x100)
633 
634 /* Mirror Good Packets Received Count; RO */
635 #define E1000_PVFGPRC(_n) (0x10010 + (_n) * 0x100)
636 
637 /* Mirror Good Packets Transmitted Count; RO */
638 #define E1000_PVFGPTC(_n) (0x10014 + (_n) * 0x100)
639 
640 /* Mirror Good Octets Received Count; RO */
641 #define E1000_PVFGORC(_n) (0x10018 + (_n) * 0x100)
642 
643 /* Mirror Extended Interrupt Cause Set; WO */
644 #define E1000_PVTEICS(_n) (0x10020 + (_n) * 0x100)
645 
646 /* Mirror Extended Interrupt Mask Set/Read; RW */
647 #define E1000_PVTEIMS(_n) (0x10024 + (_n) * 0x100)
648 
649 /* Mirror Extended Interrupt Mask Clear; WO */
650 #define E1000_PVTEIMC(_n) (0x10028 + (_n) * 0x100)
651 
652 /* Mirror Extended Interrupt Auto Clear; RW */
653 #define E1000_PVTEIAC(_n) (0x1002C + (_n) * 0x100)
654 
655 /* Mirror Extended Interrupt Auto Mask Enable; RW */
656 #define E1000_PVTEIAM(_n) (0x10030 + (_n) * 0x100)
657 
658 /* Mirror Good Octets Transmitted Count; RO */
659 #define E1000_PVFGOTC(_n) (0x10034 + (_n) * 0x100)
660 
661 /* Mirror Multicast Packets Received Count; RO */
662 #define E1000_PVFMPRC(_n) (0x1003C + (_n) * 0x100)
663 
664 /* Mirror Good RX Packets loopback Count; RO */
665 #define E1000_PVFGPRLBC(_n) (0x10040 + (_n) * 0x100)
666 
667 /* Mirror Good TX packets loopback Count; RO */
668 #define E1000_PVFGPTLBC(_n) (0x10044 + (_n) * 0x100)
669 
670 /* Mirror Good RX Octets loopback Count; RO */
671 #define E1000_PVFGORLBC(_n) (0x10048 + (_n) * 0x100)
672 
673 /* Mirror Good TX Octets loopback Count; RO */
674 #define E1000_PVFGOTLBC(_n) (0x10050 + (_n) * 0x100)
675 
676 /* Mirror Extended Interrupt Cause Set; RC/W1C */
677 #define E1000_PVTEICR(_n) (0x10080 + (_n) * 0x100)
678 
679 /*
680  * These are fake addresses that, according to the specification, the device
681  * is not using. They are used to distinguish between the PF and the VFs
682  * accessing their VTIVAR register (which is the same address, 0x1700)
683  */
684 #define E1000_VTIVAR      0x11700
685 #define E1000_VTIVAR_MISC 0x11720
686 
687 #define E1000_RSS_QUEUE(reta, hash) (E1000_RETA_VAL(reta, hash) & 0x0F)
688 
689 #define E1000_MRQ_RSS_TYPE_IPV4UDP 7
690 #define E1000_MRQ_RSS_TYPE_IPV6UDP 8
691 
692 #define E1000_STATUS_IOV_MODE 0x00040000
693 
694 #define E1000_STATUS_NUM_VFS_SHIFT 14
695 
696 #define E1000_ADVRXD_PKT_IP4  BIT(0)
697 #define E1000_ADVRXD_PKT_IP6  BIT(2)
698 #define E1000_ADVRXD_PKT_IP6E BIT(3)
699 #define E1000_ADVRXD_PKT_TCP  BIT(4)
700 #define E1000_ADVRXD_PKT_UDP  BIT(5)
701 #define E1000_ADVRXD_PKT_SCTP BIT(6)
702 
703 #define IGB_MAX_PS_BUFFERS 2
704 
705 #define E1000_ADVRXD_HDR_LEN_OFFSET    (21 - 16)
706 #define E1000_ADVRXD_ADV_HDR_LEN_MASK  ((BIT(10) - 1) << \
707                                         E1000_ADVRXD_HDR_LEN_OFFSET)
708 #define E1000_ADVRXD_HDR_SPH           BIT(15)
709 #define E1000_ADVRXD_ST_ERR_HBO_OFFSET BIT(3 + 20)
710 
711 static inline uint8_t igb_ivar_entry_rx(uint8_t i)
712 {
713     return i < 8 ? i * 4 : (i - 8) * 4 + 2;
714 }
715 
716 static inline uint8_t igb_ivar_entry_tx(uint8_t i)
717 {
718     return i < 8 ? i * 4 + 1 : (i - 8) * 4 + 3;
719 }
720 
721 #endif
722