1 /******************************************************************************* 2 3 Intel PRO/1000 Linux driver 4 Copyright(c) 1999 - 2006 Intel Corporation. 5 6 This program is free software; you can redistribute it and/or modify it 7 under the terms and conditions of the GNU General Public License, 8 version 2, as published by the Free Software Foundation. 9 10 This program is distributed in the hope it will be useful, but WITHOUT 11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 more details. 14 15 You should have received a copy of the GNU General Public License along with 16 this program; if not, see <http://www.gnu.org/licenses/>. 17 18 The full GNU General Public License is included in this distribution in 19 the file called "COPYING". 20 21 Contact Information: 22 Linux NICS <linux.nics@intel.com> 23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> 24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 25 26 *******************************************************************************/ 27 28 /* e1000_hw.h 29 * Structures, enums, and macros for the MAC 30 */ 31 32 #ifndef _E1000_HW_H_ 33 #define _E1000_HW_H_ 34 35 36 /* PCI Device IDs */ 37 #define E1000_DEV_ID_82542 0x1000 38 #define E1000_DEV_ID_82543GC_FIBER 0x1001 39 #define E1000_DEV_ID_82543GC_COPPER 0x1004 40 #define E1000_DEV_ID_82544EI_COPPER 0x1008 41 #define E1000_DEV_ID_82544EI_FIBER 0x1009 42 #define E1000_DEV_ID_82544GC_COPPER 0x100C 43 #define E1000_DEV_ID_82544GC_LOM 0x100D 44 #define E1000_DEV_ID_82540EM 0x100E 45 #define E1000_DEV_ID_82540EM_LOM 0x1015 46 #define E1000_DEV_ID_82540EP_LOM 0x1016 47 #define E1000_DEV_ID_82540EP 0x1017 48 #define E1000_DEV_ID_82540EP_LP 0x101E 49 #define E1000_DEV_ID_82545EM_COPPER 0x100F 50 #define E1000_DEV_ID_82545EM_FIBER 0x1011 51 #define E1000_DEV_ID_82545GM_COPPER 0x1026 52 #define E1000_DEV_ID_82545GM_FIBER 0x1027 53 #define E1000_DEV_ID_82545GM_SERDES 0x1028 54 #define E1000_DEV_ID_82546EB_COPPER 0x1010 55 #define E1000_DEV_ID_82546EB_FIBER 0x1012 56 #define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D 57 #define E1000_DEV_ID_82541EI 0x1013 58 #define E1000_DEV_ID_82541EI_MOBILE 0x1018 59 #define E1000_DEV_ID_82541ER_LOM 0x1014 60 #define E1000_DEV_ID_82541ER 0x1078 61 #define E1000_DEV_ID_82547GI 0x1075 62 #define E1000_DEV_ID_82541GI 0x1076 63 #define E1000_DEV_ID_82541GI_MOBILE 0x1077 64 #define E1000_DEV_ID_82541GI_LF 0x107C 65 #define E1000_DEV_ID_82546GB_COPPER 0x1079 66 #define E1000_DEV_ID_82546GB_FIBER 0x107A 67 #define E1000_DEV_ID_82546GB_SERDES 0x107B 68 #define E1000_DEV_ID_82546GB_PCIE 0x108A 69 #define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 70 #define E1000_DEV_ID_82547EI 0x1019 71 #define E1000_DEV_ID_82547EI_MOBILE 0x101A 72 #define E1000_DEV_ID_82571EB_COPPER 0x105E 73 #define E1000_DEV_ID_82571EB_FIBER 0x105F 74 #define E1000_DEV_ID_82571EB_SERDES 0x1060 75 #define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4 76 #define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5 77 #define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5 78 #define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC 79 #define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9 80 #define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA 81 #define E1000_DEV_ID_82572EI_COPPER 0x107D 82 #define E1000_DEV_ID_82572EI_FIBER 0x107E 83 #define E1000_DEV_ID_82572EI_SERDES 0x107F 84 #define E1000_DEV_ID_82572EI 0x10B9 85 #define E1000_DEV_ID_82573E 0x108B 86 #define E1000_DEV_ID_82573E_IAMT 0x108C 87 #define E1000_DEV_ID_82573L 0x109A 88 #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5 89 #define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096 90 #define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098 91 #define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA 92 #define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB 93 94 #define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049 95 #define E1000_DEV_ID_ICH8_IGP_AMT 0x104A 96 #define E1000_DEV_ID_ICH8_IGP_C 0x104B 97 #define E1000_DEV_ID_ICH8_IFE 0x104C 98 #define E1000_DEV_ID_ICH8_IFE_GT 0x10C4 99 #define E1000_DEV_ID_ICH8_IFE_G 0x10C5 100 #define E1000_DEV_ID_ICH8_IGP_M 0x104D 101 102 /* Register Set. (82543, 82544) 103 * 104 * Registers are defined to be 32 bits and should be accessed as 32 bit values. 105 * These registers are physically located on the NIC, but are mapped into the 106 * host memory address space. 107 * 108 * RW - register is both readable and writable 109 * RO - register is read only 110 * WO - register is write only 111 * R/clr - register is read only and is cleared when read 112 * A - register array 113 */ 114 #define E1000_CTRL 0x00000 /* Device Control - RW */ 115 #define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */ 116 #define E1000_STATUS 0x00008 /* Device Status - RO */ 117 #define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ 118 #define E1000_EERD 0x00014 /* EEPROM Read - RW */ 119 #define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ 120 #define E1000_FLA 0x0001C /* Flash Access - RW */ 121 #define E1000_MDIC 0x00020 /* MDI Control - RW */ 122 #define E1000_SCTL 0x00024 /* SerDes Control - RW */ 123 #define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */ 124 #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ 125 #define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ 126 #define E1000_FCT 0x00030 /* Flow Control Type - RW */ 127 #define E1000_VET 0x00038 /* VLAN Ether Type - RW */ 128 #define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ 129 #define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ 130 #define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ 131 #define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ 132 #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ 133 #define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ 134 #define E1000_RCTL 0x00100 /* RX Control - RW */ 135 #define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */ 136 #define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */ 137 #define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */ 138 #define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */ 139 #define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */ 140 #define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */ 141 #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ 142 #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ 143 #define E1000_RXCW 0x00180 /* RX Configuration Word - RO */ 144 #define E1000_TCTL 0x00400 /* TX Control - RW */ 145 #define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */ 146 #define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */ 147 #define E1000_TBT 0x00448 /* TX Burst Timer - RW */ 148 #define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ 149 #define E1000_LEDCTL 0x00E00 /* LED Control - RW */ 150 #define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ 151 #define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ 152 #define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ 153 #define FEXTNVM_SW_CONFIG 0x0001 154 #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ 155 #define E1000_PBS 0x01008 /* Packet Buffer Size */ 156 #define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ 157 #define E1000_FLASH_UPDATES 1000 158 #define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ 159 #define E1000_FLASHT 0x01028 /* FLASH Timer Register */ 160 #define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ 161 #define E1000_FLSWCTL 0x01030 /* FLASH control register */ 162 #define E1000_FLSWDATA 0x01034 /* FLASH data register */ 163 #define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ 164 #define E1000_FLOP 0x0103C /* FLASH Opcode Register */ 165 #define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ 166 #define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ 167 #define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ 168 #define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ 169 #define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */ 170 #define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */ 171 #define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */ 172 #define E1000_RDH 0x02810 /* RX Descriptor Head - RW */ 173 #define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */ 174 #define E1000_RDTR 0x02820 /* RX Delay Timer - RW */ 175 #define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */ 176 #define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */ 177 #define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */ 178 #define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */ 179 #define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */ 180 #define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */ 181 #define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */ 182 #define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */ 183 #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ 184 #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ 185 #define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ 186 #define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ 187 #define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ 188 #define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ 189 #define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ 190 #define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */ 191 #define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */ 192 #define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */ 193 #define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */ 194 #define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */ 195 #define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */ 196 #define E1000_TDH 0x03810 /* TX Descriptor Head - RW */ 197 #define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */ 198 #define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */ 199 #define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */ 200 #define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */ 201 #define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ 202 #define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */ 203 #define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */ 204 #define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */ 205 #define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */ 206 #define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */ 207 #define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */ 208 #define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */ 209 #define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */ 210 #define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ 211 #define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ 212 #define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ 213 #define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ 214 #define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ 215 #define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ 216 #define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ 217 #define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ 218 #define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ 219 #define E1000_COLC 0x04028 /* Collision Count - R/clr */ 220 #define E1000_DC 0x04030 /* Defer Count - R/clr */ 221 #define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */ 222 #define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ 223 #define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ 224 #define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ 225 #define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */ 226 #define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */ 227 #define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */ 228 #define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */ 229 #define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */ 230 #define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */ 231 #define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */ 232 #define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */ 233 #define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */ 234 #define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */ 235 #define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */ 236 #define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */ 237 #define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */ 238 #define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */ 239 #define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */ 240 #define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */ 241 #define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */ 242 #define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */ 243 #define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */ 244 #define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */ 245 #define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */ 246 #define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */ 247 #define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */ 248 #define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */ 249 #define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */ 250 #define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ 251 #define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */ 252 #define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */ 253 #define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */ 254 #define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */ 255 #define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */ 256 #define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */ 257 #define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */ 258 #define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */ 259 #define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */ 260 #define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */ 261 #define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */ 262 #define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */ 263 #define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */ 264 #define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */ 265 #define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ 266 #define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ 267 #define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ 268 #define E1000_IAC 0x04100 /* Interrupt Assertion Count */ 269 #define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */ 270 #define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */ 271 #define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */ 272 #define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */ 273 #define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ 274 #define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ 275 #define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ 276 #define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ 277 #define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ 278 #define E1000_RFCTL 0x05008 /* Receive Filter Control*/ 279 #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ 280 #define E1000_RA 0x05400 /* Receive Address - RW Array */ 281 #define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ 282 #define E1000_WUC 0x05800 /* Wakeup Control - RW */ 283 #define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ 284 #define E1000_WUS 0x05810 /* Wakeup Status - RO */ 285 #define E1000_MANC 0x05820 /* Management Control - RW */ 286 #define E1000_IPAV 0x05838 /* IP Address Valid - RW */ 287 #define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ 288 #define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ 289 #define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ 290 #define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ 291 #define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ 292 #define E1000_HOST_IF 0x08800 /* Host Interface */ 293 #define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ 294 #define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ 295 296 #define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */ 297 #define E1000_MDPHYA 0x0003C /* PHY address - RW */ 298 #define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ 299 #define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */ 300 301 #define E1000_GCR 0x05B00 /* PCI-Ex Control */ 302 #define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ 303 #define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ 304 #define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ 305 #define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ 306 #define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ 307 #define E1000_SWSM 0x05B50 /* SW Semaphore */ 308 #define E1000_FWSM 0x05B54 /* FW Semaphore */ 309 #define E1000_FFLT_DBG 0x05F04 /* Debug Register */ 310 #define E1000_HICR 0x08F00 /* Host Inteface Control */ 311 312 /* RSS registers */ 313 #define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ 314 #define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ 315 #define E1000_RETA 0x05C00 /* Redirection Table - RW Array */ 316 #define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */ 317 #define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ 318 #define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ 319 320 /* PHY 1000 MII Register/Bit Definitions */ 321 /* PHY Registers defined by IEEE */ 322 #define PHY_CTRL 0x00 /* Control Register */ 323 #define PHY_STATUS 0x01 /* Status Regiser */ 324 #define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ 325 #define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ 326 #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ 327 #define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ 328 #define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ 329 #define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */ 330 #define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ 331 #define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ 332 #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ 333 #define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ 334 335 #define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ 336 #define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */ 337 338 /* M88E1000 Specific Registers */ 339 #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ 340 #define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */ 341 #define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */ 342 #define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */ 343 #define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */ 344 #define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ 345 346 #define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */ 347 #define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */ 348 #define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */ 349 #define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */ 350 #define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */ 351 352 /* PHY Control Register */ 353 #define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ 354 #define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ 355 #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ 356 #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ 357 #define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ 358 #define MII_CR_POWER_DOWN 0x0800 /* Power down */ 359 #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ 360 #define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ 361 #define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ 362 #define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ 363 364 /* PHY Status Register */ 365 #define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ 366 #define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ 367 #define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ 368 #define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ 369 #define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ 370 #define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ 371 #define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ 372 #define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ 373 #define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ 374 #define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ 375 #define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ 376 #define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ 377 #define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ 378 #define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ 379 #define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ 380 381 /* Interrupt Cause Read */ 382 #define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ 383 #define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ 384 #define E1000_ICR_LSC 0x00000004 /* Link Status Change */ 385 #define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */ 386 #define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */ 387 #define E1000_ICR_RXO 0x00000040 /* rx overrun */ 388 #define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ 389 #define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ 390 #define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */ 391 #define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ 392 #define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ 393 #define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ 394 #define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ 395 #define E1000_ICR_TXD_LOW 0x00008000 396 #define E1000_ICR_SRPD 0x00010000 397 #define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ 398 #define E1000_ICR_MNG 0x00040000 /* Manageability event */ 399 #define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ 400 #define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ 401 #define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */ 402 #define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */ 403 #define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */ 404 #define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */ 405 #define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */ 406 #define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */ 407 #define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */ 408 #define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */ 409 #define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */ 410 #define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */ 411 412 /* Interrupt Cause Set */ 413 #define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ 414 #define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ 415 #define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ 416 #define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ 417 #define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ 418 #define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */ 419 #define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ 420 #define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */ 421 #define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ 422 #define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ 423 #define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ 424 #define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ 425 #define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ 426 #define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW 427 #define E1000_ICS_SRPD E1000_ICR_SRPD 428 #define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */ 429 #define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */ 430 #define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */ 431 #define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ 432 #define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ 433 #define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ 434 #define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ 435 #define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ 436 #define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ 437 #define E1000_ICS_DSW E1000_ICR_DSW 438 #define E1000_ICS_PHYINT E1000_ICR_PHYINT 439 #define E1000_ICS_EPRST E1000_ICR_EPRST 440 441 /* Interrupt Mask Set */ 442 #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ 443 #define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ 444 #define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ 445 #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ 446 #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ 447 #define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */ 448 #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ 449 #define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */ 450 #define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ 451 #define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ 452 #define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ 453 #define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ 454 #define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ 455 #define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW 456 #define E1000_IMS_SRPD E1000_ICR_SRPD 457 #define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */ 458 #define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */ 459 #define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */ 460 #define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ 461 #define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ 462 #define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ 463 #define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ 464 #define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ 465 #define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ 466 #define E1000_IMS_DSW E1000_ICR_DSW 467 #define E1000_IMS_PHYINT E1000_ICR_PHYINT 468 #define E1000_IMS_EPRST E1000_ICR_EPRST 469 470 /* Interrupt Mask Clear */ 471 #define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ 472 #define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ 473 #define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */ 474 #define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ 475 #define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ 476 #define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */ 477 #define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */ 478 #define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */ 479 #define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */ 480 #define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ 481 #define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ 482 #define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ 483 #define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ 484 #define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW 485 #define E1000_IMC_SRPD E1000_ICR_SRPD 486 #define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */ 487 #define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */ 488 #define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */ 489 #define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */ 490 #define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */ 491 #define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */ 492 #define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */ 493 #define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */ 494 #define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */ 495 #define E1000_IMC_DSW E1000_ICR_DSW 496 #define E1000_IMC_PHYINT E1000_ICR_PHYINT 497 #define E1000_IMC_EPRST E1000_ICR_EPRST 498 499 /* Receive Control */ 500 #define E1000_RCTL_RST 0x00000001 /* Software reset */ 501 #define E1000_RCTL_EN 0x00000002 /* enable */ 502 #define E1000_RCTL_SBP 0x00000004 /* store bad packet */ 503 #define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */ 504 #define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */ 505 #define E1000_RCTL_LPE 0x00000020 /* long packet enable */ 506 #define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ 507 #define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ 508 #define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ 509 #define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ 510 #define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */ 511 #define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ 512 #define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ 513 #define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */ 514 #define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */ 515 #define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ 516 #define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */ 517 #define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */ 518 #define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */ 519 #define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ 520 #define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */ 521 #define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ 522 /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ 523 #define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */ 524 #define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */ 525 #define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */ 526 #define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */ 527 /* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ 528 #define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */ 529 #define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */ 530 #define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */ 531 #define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ 532 #define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ 533 #define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ 534 #define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ 535 #define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ 536 #define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ 537 #define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ 538 #define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */ 539 #define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */ 540 541 542 #define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */ 543 #define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */ 544 #define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */ 545 #define E1000_EEPROM_RW_REG_DONE 0x10 /* Offset to READ/WRITE done bit */ 546 #define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */ 547 #define E1000_EEPROM_RW_ADDR_SHIFT 8 /* Shift to the address bits */ 548 #define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */ 549 #define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */ 550 /* Register Bit Masks */ 551 /* Device Control */ 552 #define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ 553 #define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ 554 #define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ 555 #define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ 556 #define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ 557 #define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ 558 #define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ 559 #define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ 560 #define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ 561 #define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ 562 #define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ 563 #define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ 564 #define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ 565 #define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ 566 #define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ 567 #define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ 568 #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ 569 #define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */ 570 #define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ 571 #define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */ 572 #define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */ 573 #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ 574 #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ 575 #define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ 576 #define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ 577 #define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ 578 #define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */ 579 #define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */ 580 #define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */ 581 #define E1000_CTRL_RST 0x04000000 /* Global reset */ 582 #define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ 583 #define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ 584 #define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */ 585 #define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ 586 #define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ 587 #define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */ 588 589 /* Device Status */ 590 #define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ 591 #define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ 592 #define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ 593 #define E1000_STATUS_FUNC_SHIFT 2 594 #define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ 595 #define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ 596 #define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ 597 #define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */ 598 #define E1000_STATUS_SPEED_MASK 0x000000C0 599 #define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ 600 #define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ 601 #define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ 602 #define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion 603 by EEPROM/Flash */ 604 #define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ 605 #define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */ 606 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ 607 #define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ 608 #define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ 609 #define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ 610 #define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */ 611 #define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */ 612 #define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */ 613 #define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */ 614 #define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */ 615 #define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */ 616 #define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */ 617 #define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */ 618 #define E1000_STATUS_FUSE_8 0x04000000 619 #define E1000_STATUS_FUSE_9 0x08000000 620 #define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */ 621 #define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */ 622 623 /* EEPROM/Flash Control */ 624 #define E1000_EECD_SK 0x00000001 /* EEPROM Clock */ 625 #define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */ 626 #define E1000_EECD_DI 0x00000004 /* EEPROM Data In */ 627 #define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */ 628 #define E1000_EECD_FWE_MASK 0x00000030 629 #define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */ 630 #define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */ 631 #define E1000_EECD_FWE_SHIFT 4 632 #define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */ 633 #define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */ 634 #define E1000_EECD_PRES 0x00000100 /* EEPROM Present */ 635 #define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */ 636 #define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type 637 * (0-small, 1-large) */ 638 #define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */ 639 #ifndef E1000_EEPROM_GRANT_ATTEMPTS 640 #define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ 641 #endif 642 #define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */ 643 #define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */ 644 #define E1000_EECD_SIZE_EX_SHIFT 11 645 #define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */ 646 #define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ 647 #define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ 648 #define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ 649 #define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ 650 #define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ 651 #define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ 652 #define E1000_EECD_SECVAL_SHIFT 22 653 #define E1000_STM_OPCODE 0xDB00 654 #define E1000_HICR_FW_RESET 0xC0 655 656 #define E1000_SHADOW_RAM_WORDS 2048 657 #define E1000_ICH_NVM_SIG_WORD 0x13 658 #define E1000_ICH_NVM_SIG_MASK 0xC0 659 660 /* MDI Control */ 661 #define E1000_MDIC_DATA_MASK 0x0000FFFF 662 #define E1000_MDIC_REG_MASK 0x001F0000 663 #define E1000_MDIC_REG_SHIFT 16 664 #define E1000_MDIC_PHY_MASK 0x03E00000 665 #define E1000_MDIC_PHY_SHIFT 21 666 #define E1000_MDIC_OP_WRITE 0x04000000 667 #define E1000_MDIC_OP_READ 0x08000000 668 #define E1000_MDIC_READY 0x10000000 669 #define E1000_MDIC_INT_EN 0x20000000 670 #define E1000_MDIC_ERROR 0x40000000 671 672 /* EEPROM Commands - Microwire */ 673 #define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */ 674 #define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */ 675 #define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */ 676 #define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */ 677 #define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erast/write disable */ 678 679 /* EEPROM Word Offsets */ 680 #define EEPROM_COMPAT 0x0003 681 #define EEPROM_ID_LED_SETTINGS 0x0004 682 #define EEPROM_VERSION 0x0005 683 #define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */ 684 #define EEPROM_PHY_CLASS_WORD 0x0007 685 #define EEPROM_INIT_CONTROL1_REG 0x000A 686 #define EEPROM_INIT_CONTROL2_REG 0x000F 687 #define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010 688 #define EEPROM_INIT_CONTROL3_PORT_B 0x0014 689 #define EEPROM_INIT_3GIO_3 0x001A 690 #define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020 691 #define EEPROM_INIT_CONTROL3_PORT_A 0x0024 692 #define EEPROM_CFG 0x0012 693 #define EEPROM_FLASH_VERSION 0x0032 694 #define EEPROM_CHECKSUM_REG 0x003F 695 696 #define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */ 697 #define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */ 698 699 /* Transmit Descriptor */ 700 struct e1000_tx_desc { 701 uint64_t buffer_addr; /* Address of the descriptor's data buffer */ 702 union { 703 uint32_t data; 704 struct { 705 uint16_t length; /* Data buffer length */ 706 uint8_t cso; /* Checksum offset */ 707 uint8_t cmd; /* Descriptor control */ 708 } flags; 709 } lower; 710 union { 711 uint32_t data; 712 struct { 713 uint8_t status; /* Descriptor status */ 714 uint8_t css; /* Checksum start */ 715 uint16_t special; 716 } fields; 717 } upper; 718 }; 719 720 /* Transmit Descriptor bit definitions */ 721 #define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ 722 #define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ 723 #define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ 724 #define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ 725 #define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ 726 #define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ 727 #define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ 728 #define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ 729 #define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ 730 #define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ 731 #define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ 732 #define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ 733 #define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ 734 #define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ 735 #define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ 736 #define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ 737 #define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ 738 #define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ 739 #define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ 740 #define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ 741 742 /* Transmit Control */ 743 #define E1000_TCTL_RST 0x00000001 /* software reset */ 744 #define E1000_TCTL_EN 0x00000002 /* enable tx */ 745 #define E1000_TCTL_BCE 0x00000004 /* busy check enable */ 746 #define E1000_TCTL_PSP 0x00000008 /* pad short packets */ 747 #define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ 748 #define E1000_TCTL_COLD 0x003ff000 /* collision distance */ 749 #define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */ 750 #define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ 751 #define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ 752 #define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ 753 #define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ 754 755 /* Receive Descriptor */ 756 struct e1000_rx_desc { 757 uint64_t buffer_addr; /* Address of the descriptor's data buffer */ 758 uint16_t length; /* Length of data DMAed into data buffer */ 759 uint16_t csum; /* Packet checksum */ 760 uint8_t status; /* Descriptor status */ 761 uint8_t errors; /* Descriptor Errors */ 762 uint16_t special; 763 }; 764 765 /* Receive Descriptor bit definitions */ 766 #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ 767 #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ 768 #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ 769 #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ 770 #define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ 771 #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ 772 #define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ 773 #define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ 774 #define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ 775 #define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ 776 #define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ 777 #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ 778 #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ 779 #define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ 780 #define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ 781 #define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ 782 #define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ 783 #define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ 784 #define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ 785 #define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ 786 #define E1000_RXD_SPC_PRI_SHIFT 13 787 #define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ 788 #define E1000_RXD_SPC_CFI_SHIFT 12 789 790 #define E1000_RXDEXT_STATERR_CE 0x01000000 791 #define E1000_RXDEXT_STATERR_SE 0x02000000 792 #define E1000_RXDEXT_STATERR_SEQ 0x04000000 793 #define E1000_RXDEXT_STATERR_CXE 0x10000000 794 #define E1000_RXDEXT_STATERR_TCPE 0x20000000 795 #define E1000_RXDEXT_STATERR_IPE 0x40000000 796 #define E1000_RXDEXT_STATERR_RXE 0x80000000 797 798 #define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 799 #define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF 800 801 /* Receive Address */ 802 #define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ 803 804 /* Offload Context Descriptor */ 805 struct e1000_context_desc { 806 union { 807 uint32_t ip_config; 808 struct { 809 uint8_t ipcss; /* IP checksum start */ 810 uint8_t ipcso; /* IP checksum offset */ 811 uint16_t ipcse; /* IP checksum end */ 812 } ip_fields; 813 } lower_setup; 814 union { 815 uint32_t tcp_config; 816 struct { 817 uint8_t tucss; /* TCP checksum start */ 818 uint8_t tucso; /* TCP checksum offset */ 819 uint16_t tucse; /* TCP checksum end */ 820 } tcp_fields; 821 } upper_setup; 822 uint32_t cmd_and_length; /* */ 823 union { 824 uint32_t data; 825 struct { 826 uint8_t status; /* Descriptor status */ 827 uint8_t hdr_len; /* Header length */ 828 uint16_t mss; /* Maximum segment size */ 829 } fields; 830 } tcp_seg_setup; 831 }; 832 833 /* Offload data descriptor */ 834 struct e1000_data_desc { 835 uint64_t buffer_addr; /* Address of the descriptor's buffer address */ 836 union { 837 uint32_t data; 838 struct { 839 uint16_t length; /* Data buffer length */ 840 uint8_t typ_len_ext; /* */ 841 uint8_t cmd; /* */ 842 } flags; 843 } lower; 844 union { 845 uint32_t data; 846 struct { 847 uint8_t status; /* Descriptor status */ 848 uint8_t popts; /* Packet Options */ 849 uint16_t special; /* */ 850 } fields; 851 } upper; 852 }; 853 854 /* Management Control */ 855 #define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ 856 #define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ 857 #define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */ 858 #define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */ 859 #define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */ 860 #define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */ 861 #define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */ 862 #define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */ 863 #define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ 864 #define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery 865 * Filtering */ 866 #define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */ 867 #define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ 868 #define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ 869 #define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ 870 #define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */ 871 #define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ 872 #define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address 873 * filtering */ 874 #define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host 875 * memory */ 876 #define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address 877 * filtering */ 878 #define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */ 879 #define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */ 880 #define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ 881 #define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ 882 #define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ 883 #define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */ 884 #define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */ 885 #define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */ 886 887 #define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ 888 #define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ 889 890 /* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */ 891 #define EEPROM_SUM 0xBABA 892 893 #endif /* _E1000_HW_H_ */ 894