1 /* 2 * Status and system control registers for Xilinx Zynq Platform 3 * 4 * Copyright (c) 2011 Michal Simek <monstr@monstr.eu> 5 * Copyright (c) 2012 PetaLogix Pty Ltd. 6 * Based on hw/arm_sysctl.c, written by Paul Brook 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License 10 * as published by the Free Software Foundation; either version 11 * 2 of the License, or (at your option) any later version. 12 * 13 * You should have received a copy of the GNU General Public License along 14 * with this program; if not, see <http://www.gnu.org/licenses/>. 15 */ 16 17 #include "qemu/osdep.h" 18 #include "hw/hw.h" 19 #include "qemu/timer.h" 20 #include "hw/sysbus.h" 21 #include "sysemu/sysemu.h" 22 #include "qemu/log.h" 23 24 #ifndef ZYNQ_SLCR_ERR_DEBUG 25 #define ZYNQ_SLCR_ERR_DEBUG 0 26 #endif 27 28 #define DB_PRINT(...) do { \ 29 if (ZYNQ_SLCR_ERR_DEBUG) { \ 30 fprintf(stderr, ": %s: ", __func__); \ 31 fprintf(stderr, ## __VA_ARGS__); \ 32 } \ 33 } while (0) 34 35 #define XILINX_LOCK_KEY 0x767b 36 #define XILINX_UNLOCK_KEY 0xdf0d 37 38 #define R_PSS_RST_CTRL_SOFT_RST 0x1 39 40 enum { 41 SCL = 0x000 / 4, 42 LOCK, 43 UNLOCK, 44 LOCKSTA, 45 46 ARM_PLL_CTRL = 0x100 / 4, 47 DDR_PLL_CTRL, 48 IO_PLL_CTRL, 49 PLL_STATUS, 50 ARM_PLL_CFG, 51 DDR_PLL_CFG, 52 IO_PLL_CFG, 53 54 ARM_CLK_CTRL = 0x120 / 4, 55 DDR_CLK_CTRL, 56 DCI_CLK_CTRL, 57 APER_CLK_CTRL, 58 USB0_CLK_CTRL, 59 USB1_CLK_CTRL, 60 GEM0_RCLK_CTRL, 61 GEM1_RCLK_CTRL, 62 GEM0_CLK_CTRL, 63 GEM1_CLK_CTRL, 64 SMC_CLK_CTRL, 65 LQSPI_CLK_CTRL, 66 SDIO_CLK_CTRL, 67 UART_CLK_CTRL, 68 SPI_CLK_CTRL, 69 CAN_CLK_CTRL, 70 CAN_MIOCLK_CTRL, 71 DBG_CLK_CTRL, 72 PCAP_CLK_CTRL, 73 TOPSW_CLK_CTRL, 74 75 #define FPGA_CTRL_REGS(n, start) \ 76 FPGA ## n ## _CLK_CTRL = (start) / 4, \ 77 FPGA ## n ## _THR_CTRL, \ 78 FPGA ## n ## _THR_CNT, \ 79 FPGA ## n ## _THR_STA, 80 FPGA_CTRL_REGS(0, 0x170) 81 FPGA_CTRL_REGS(1, 0x180) 82 FPGA_CTRL_REGS(2, 0x190) 83 FPGA_CTRL_REGS(3, 0x1a0) 84 85 BANDGAP_TRIP = 0x1b8 / 4, 86 PLL_PREDIVISOR = 0x1c0 / 4, 87 CLK_621_TRUE, 88 89 PSS_RST_CTRL = 0x200 / 4, 90 DDR_RST_CTRL, 91 TOPSW_RESET_CTRL, 92 DMAC_RST_CTRL, 93 USB_RST_CTRL, 94 GEM_RST_CTRL, 95 SDIO_RST_CTRL, 96 SPI_RST_CTRL, 97 CAN_RST_CTRL, 98 I2C_RST_CTRL, 99 UART_RST_CTRL, 100 GPIO_RST_CTRL, 101 LQSPI_RST_CTRL, 102 SMC_RST_CTRL, 103 OCM_RST_CTRL, 104 FPGA_RST_CTRL = 0x240 / 4, 105 A9_CPU_RST_CTRL, 106 107 RS_AWDT_CTRL = 0x24c / 4, 108 RST_REASON, 109 110 REBOOT_STATUS = 0x258 / 4, 111 BOOT_MODE, 112 113 APU_CTRL = 0x300 / 4, 114 WDT_CLK_SEL, 115 116 TZ_DMA_NS = 0x440 / 4, 117 TZ_DMA_IRQ_NS, 118 TZ_DMA_PERIPH_NS, 119 120 PSS_IDCODE = 0x530 / 4, 121 122 DDR_URGENT = 0x600 / 4, 123 DDR_CAL_START = 0x60c / 4, 124 DDR_REF_START = 0x614 / 4, 125 DDR_CMD_STA, 126 DDR_URGENT_SEL, 127 DDR_DFI_STATUS, 128 129 MIO = 0x700 / 4, 130 #define MIO_LENGTH 54 131 132 MIO_LOOPBACK = 0x804 / 4, 133 MIO_MST_TRI0, 134 MIO_MST_TRI1, 135 136 SD0_WP_CD_SEL = 0x830 / 4, 137 SD1_WP_CD_SEL, 138 139 LVL_SHFTR_EN = 0x900 / 4, 140 OCM_CFG = 0x910 / 4, 141 142 CPU_RAM = 0xa00 / 4, 143 144 IOU = 0xa30 / 4, 145 146 DMAC_RAM = 0xa50 / 4, 147 148 AFI0 = 0xa60 / 4, 149 AFI1 = AFI0 + 3, 150 AFI2 = AFI1 + 3, 151 AFI3 = AFI2 + 3, 152 #define AFI_LENGTH 3 153 154 OCM = 0xa90 / 4, 155 156 DEVCI_RAM = 0xaa0 / 4, 157 158 CSG_RAM = 0xab0 / 4, 159 160 GPIOB_CTRL = 0xb00 / 4, 161 GPIOB_CFG_CMOS18, 162 GPIOB_CFG_CMOS25, 163 GPIOB_CFG_CMOS33, 164 GPIOB_CFG_HSTL = 0xb14 / 4, 165 GPIOB_DRVR_BIAS_CTRL, 166 167 DDRIOB = 0xb40 / 4, 168 #define DDRIOB_LENGTH 14 169 }; 170 171 #define ZYNQ_SLCR_MMIO_SIZE 0x1000 172 #define ZYNQ_SLCR_NUM_REGS (ZYNQ_SLCR_MMIO_SIZE / 4) 173 174 #define TYPE_ZYNQ_SLCR "xilinx,zynq_slcr" 175 #define ZYNQ_SLCR(obj) OBJECT_CHECK(ZynqSLCRState, (obj), TYPE_ZYNQ_SLCR) 176 177 typedef struct ZynqSLCRState { 178 SysBusDevice parent_obj; 179 180 MemoryRegion iomem; 181 182 uint32_t regs[ZYNQ_SLCR_NUM_REGS]; 183 } ZynqSLCRState; 184 185 static void zynq_slcr_reset(DeviceState *d) 186 { 187 ZynqSLCRState *s = ZYNQ_SLCR(d); 188 int i; 189 190 DB_PRINT("RESET\n"); 191 192 s->regs[LOCKSTA] = 1; 193 /* 0x100 - 0x11C */ 194 s->regs[ARM_PLL_CTRL] = 0x0001A008; 195 s->regs[DDR_PLL_CTRL] = 0x0001A008; 196 s->regs[IO_PLL_CTRL] = 0x0001A008; 197 s->regs[PLL_STATUS] = 0x0000003F; 198 s->regs[ARM_PLL_CFG] = 0x00014000; 199 s->regs[DDR_PLL_CFG] = 0x00014000; 200 s->regs[IO_PLL_CFG] = 0x00014000; 201 202 /* 0x120 - 0x16C */ 203 s->regs[ARM_CLK_CTRL] = 0x1F000400; 204 s->regs[DDR_CLK_CTRL] = 0x18400003; 205 s->regs[DCI_CLK_CTRL] = 0x01E03201; 206 s->regs[APER_CLK_CTRL] = 0x01FFCCCD; 207 s->regs[USB0_CLK_CTRL] = s->regs[USB1_CLK_CTRL] = 0x00101941; 208 s->regs[GEM0_RCLK_CTRL] = s->regs[GEM1_RCLK_CTRL] = 0x00000001; 209 s->regs[GEM0_CLK_CTRL] = s->regs[GEM1_CLK_CTRL] = 0x00003C01; 210 s->regs[SMC_CLK_CTRL] = 0x00003C01; 211 s->regs[LQSPI_CLK_CTRL] = 0x00002821; 212 s->regs[SDIO_CLK_CTRL] = 0x00001E03; 213 s->regs[UART_CLK_CTRL] = 0x00003F03; 214 s->regs[SPI_CLK_CTRL] = 0x00003F03; 215 s->regs[CAN_CLK_CTRL] = 0x00501903; 216 s->regs[DBG_CLK_CTRL] = 0x00000F03; 217 s->regs[PCAP_CLK_CTRL] = 0x00000F01; 218 219 /* 0x170 - 0x1AC */ 220 s->regs[FPGA0_CLK_CTRL] = s->regs[FPGA1_CLK_CTRL] = s->regs[FPGA2_CLK_CTRL] 221 = s->regs[FPGA3_CLK_CTRL] = 0x00101800; 222 s->regs[FPGA0_THR_STA] = s->regs[FPGA1_THR_STA] = s->regs[FPGA2_THR_STA] 223 = s->regs[FPGA3_THR_STA] = 0x00010000; 224 225 /* 0x1B0 - 0x1D8 */ 226 s->regs[BANDGAP_TRIP] = 0x0000001F; 227 s->regs[PLL_PREDIVISOR] = 0x00000001; 228 s->regs[CLK_621_TRUE] = 0x00000001; 229 230 /* 0x200 - 0x25C */ 231 s->regs[FPGA_RST_CTRL] = 0x01F33F0F; 232 s->regs[RST_REASON] = 0x00000040; 233 234 s->regs[BOOT_MODE] = 0x00000001; 235 236 /* 0x700 - 0x7D4 */ 237 for (i = 0; i < 54; i++) { 238 s->regs[MIO + i] = 0x00001601; 239 } 240 for (i = 2; i <= 8; i++) { 241 s->regs[MIO + i] = 0x00000601; 242 } 243 244 s->regs[MIO_MST_TRI0] = s->regs[MIO_MST_TRI1] = 0xFFFFFFFF; 245 246 s->regs[CPU_RAM + 0] = s->regs[CPU_RAM + 1] = s->regs[CPU_RAM + 3] 247 = s->regs[CPU_RAM + 4] = s->regs[CPU_RAM + 7] 248 = 0x00010101; 249 s->regs[CPU_RAM + 2] = s->regs[CPU_RAM + 5] = 0x01010101; 250 s->regs[CPU_RAM + 6] = 0x00000001; 251 252 s->regs[IOU + 0] = s->regs[IOU + 1] = s->regs[IOU + 2] = s->regs[IOU + 3] 253 = 0x09090909; 254 s->regs[IOU + 4] = s->regs[IOU + 5] = 0x00090909; 255 s->regs[IOU + 6] = 0x00000909; 256 257 s->regs[DMAC_RAM] = 0x00000009; 258 259 s->regs[AFI0 + 0] = s->regs[AFI0 + 1] = 0x09090909; 260 s->regs[AFI1 + 0] = s->regs[AFI1 + 1] = 0x09090909; 261 s->regs[AFI2 + 0] = s->regs[AFI2 + 1] = 0x09090909; 262 s->regs[AFI3 + 0] = s->regs[AFI3 + 1] = 0x09090909; 263 s->regs[AFI0 + 2] = s->regs[AFI1 + 2] = s->regs[AFI2 + 2] 264 = s->regs[AFI3 + 2] = 0x00000909; 265 266 s->regs[OCM + 0] = 0x01010101; 267 s->regs[OCM + 1] = s->regs[OCM + 2] = 0x09090909; 268 269 s->regs[DEVCI_RAM] = 0x00000909; 270 s->regs[CSG_RAM] = 0x00000001; 271 272 s->regs[DDRIOB + 0] = s->regs[DDRIOB + 1] = s->regs[DDRIOB + 2] 273 = s->regs[DDRIOB + 3] = 0x00000e00; 274 s->regs[DDRIOB + 4] = s->regs[DDRIOB + 5] = s->regs[DDRIOB + 6] 275 = 0x00000e00; 276 s->regs[DDRIOB + 12] = 0x00000021; 277 } 278 279 280 static bool zynq_slcr_check_offset(hwaddr offset, bool rnw) 281 { 282 switch (offset) { 283 case LOCK: 284 case UNLOCK: 285 case DDR_CAL_START: 286 case DDR_REF_START: 287 return !rnw; /* Write only */ 288 case LOCKSTA: 289 case FPGA0_THR_STA: 290 case FPGA1_THR_STA: 291 case FPGA2_THR_STA: 292 case FPGA3_THR_STA: 293 case BOOT_MODE: 294 case PSS_IDCODE: 295 case DDR_CMD_STA: 296 case DDR_DFI_STATUS: 297 case PLL_STATUS: 298 return rnw;/* read only */ 299 case SCL: 300 case ARM_PLL_CTRL ... IO_PLL_CTRL: 301 case ARM_PLL_CFG ... IO_PLL_CFG: 302 case ARM_CLK_CTRL ... TOPSW_CLK_CTRL: 303 case FPGA0_CLK_CTRL ... FPGA0_THR_CNT: 304 case FPGA1_CLK_CTRL ... FPGA1_THR_CNT: 305 case FPGA2_CLK_CTRL ... FPGA2_THR_CNT: 306 case FPGA3_CLK_CTRL ... FPGA3_THR_CNT: 307 case BANDGAP_TRIP: 308 case PLL_PREDIVISOR: 309 case CLK_621_TRUE: 310 case PSS_RST_CTRL ... A9_CPU_RST_CTRL: 311 case RS_AWDT_CTRL: 312 case RST_REASON: 313 case REBOOT_STATUS: 314 case APU_CTRL: 315 case WDT_CLK_SEL: 316 case TZ_DMA_NS ... TZ_DMA_PERIPH_NS: 317 case DDR_URGENT: 318 case DDR_URGENT_SEL: 319 case MIO ... MIO + MIO_LENGTH - 1: 320 case MIO_LOOPBACK ... MIO_MST_TRI1: 321 case SD0_WP_CD_SEL: 322 case SD1_WP_CD_SEL: 323 case LVL_SHFTR_EN: 324 case OCM_CFG: 325 case CPU_RAM: 326 case IOU: 327 case DMAC_RAM: 328 case AFI0 ... AFI3 + AFI_LENGTH - 1: 329 case OCM: 330 case DEVCI_RAM: 331 case CSG_RAM: 332 case GPIOB_CTRL ... GPIOB_CFG_CMOS33: 333 case GPIOB_CFG_HSTL: 334 case GPIOB_DRVR_BIAS_CTRL: 335 case DDRIOB ... DDRIOB + DDRIOB_LENGTH - 1: 336 return true; 337 default: 338 return false; 339 } 340 } 341 342 static uint64_t zynq_slcr_read(void *opaque, hwaddr offset, 343 unsigned size) 344 { 345 ZynqSLCRState *s = opaque; 346 offset /= 4; 347 uint32_t ret = s->regs[offset]; 348 349 if (!zynq_slcr_check_offset(offset, true)) { 350 qemu_log_mask(LOG_GUEST_ERROR, "zynq_slcr: Invalid read access to " 351 " addr %" HWADDR_PRIx "\n", offset * 4); 352 } 353 354 DB_PRINT("addr: %08" HWADDR_PRIx " data: %08" PRIx32 "\n", offset * 4, ret); 355 return ret; 356 } 357 358 static void zynq_slcr_write(void *opaque, hwaddr offset, 359 uint64_t val, unsigned size) 360 { 361 ZynqSLCRState *s = (ZynqSLCRState *)opaque; 362 offset /= 4; 363 364 DB_PRINT("addr: %08" HWADDR_PRIx " data: %08" PRIx64 "\n", offset * 4, val); 365 366 if (!zynq_slcr_check_offset(offset, false)) { 367 qemu_log_mask(LOG_GUEST_ERROR, "zynq_slcr: Invalid write access to " 368 "addr %" HWADDR_PRIx "\n", offset * 4); 369 return; 370 } 371 372 switch (offset) { 373 case SCL: 374 s->regs[SCL] = val & 0x1; 375 return; 376 case LOCK: 377 if ((val & 0xFFFF) == XILINX_LOCK_KEY) { 378 DB_PRINT("XILINX LOCK 0xF8000000 + 0x%x <= 0x%x\n", (int)offset, 379 (unsigned)val & 0xFFFF); 380 s->regs[LOCKSTA] = 1; 381 } else { 382 DB_PRINT("WRONG XILINX LOCK KEY 0xF8000000 + 0x%x <= 0x%x\n", 383 (int)offset, (unsigned)val & 0xFFFF); 384 } 385 return; 386 case UNLOCK: 387 if ((val & 0xFFFF) == XILINX_UNLOCK_KEY) { 388 DB_PRINT("XILINX UNLOCK 0xF8000000 + 0x%x <= 0x%x\n", (int)offset, 389 (unsigned)val & 0xFFFF); 390 s->regs[LOCKSTA] = 0; 391 } else { 392 DB_PRINT("WRONG XILINX UNLOCK KEY 0xF8000000 + 0x%x <= 0x%x\n", 393 (int)offset, (unsigned)val & 0xFFFF); 394 } 395 return; 396 } 397 398 if (s->regs[LOCKSTA]) { 399 qemu_log_mask(LOG_GUEST_ERROR, 400 "SCLR registers are locked. Unlock them first\n"); 401 return; 402 } 403 s->regs[offset] = val; 404 405 switch (offset) { 406 case PSS_RST_CTRL: 407 if (val & R_PSS_RST_CTRL_SOFT_RST) { 408 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 409 } 410 break; 411 } 412 } 413 414 static const MemoryRegionOps slcr_ops = { 415 .read = zynq_slcr_read, 416 .write = zynq_slcr_write, 417 .endianness = DEVICE_NATIVE_ENDIAN, 418 }; 419 420 static void zynq_slcr_init(Object *obj) 421 { 422 ZynqSLCRState *s = ZYNQ_SLCR(obj); 423 424 memory_region_init_io(&s->iomem, obj, &slcr_ops, s, "slcr", 425 ZYNQ_SLCR_MMIO_SIZE); 426 sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); 427 } 428 429 static const VMStateDescription vmstate_zynq_slcr = { 430 .name = "zynq_slcr", 431 .version_id = 2, 432 .minimum_version_id = 2, 433 .fields = (VMStateField[]) { 434 VMSTATE_UINT32_ARRAY(regs, ZynqSLCRState, ZYNQ_SLCR_NUM_REGS), 435 VMSTATE_END_OF_LIST() 436 } 437 }; 438 439 static void zynq_slcr_class_init(ObjectClass *klass, void *data) 440 { 441 DeviceClass *dc = DEVICE_CLASS(klass); 442 443 dc->vmsd = &vmstate_zynq_slcr; 444 dc->reset = zynq_slcr_reset; 445 } 446 447 static const TypeInfo zynq_slcr_info = { 448 .class_init = zynq_slcr_class_init, 449 .name = TYPE_ZYNQ_SLCR, 450 .parent = TYPE_SYS_BUS_DEVICE, 451 .instance_size = sizeof(ZynqSLCRState), 452 .instance_init = zynq_slcr_init, 453 }; 454 455 static void zynq_slcr_register_types(void) 456 { 457 type_register_static(&zynq_slcr_info); 458 } 459 460 type_init(zynq_slcr_register_types) 461