1 /* 2 * Status and system control registers for Xilinx Zynq Platform 3 * 4 * Copyright (c) 2011 Michal Simek <monstr@monstr.eu> 5 * Copyright (c) 2012 PetaLogix Pty Ltd. 6 * Based on hw/arm_sysctl.c, written by Paul Brook 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License 10 * as published by the Free Software Foundation; either version 11 * 2 of the License, or (at your option) any later version. 12 * 13 * You should have received a copy of the GNU General Public License along 14 * with this program; if not, see <http://www.gnu.org/licenses/>. 15 */ 16 17 #include "hw/hw.h" 18 #include "qemu/timer.h" 19 #include "hw/sysbus.h" 20 #include "sysemu/sysemu.h" 21 22 #ifndef ZYNQ_SLCR_ERR_DEBUG 23 #define ZYNQ_SLCR_ERR_DEBUG 0 24 #endif 25 26 #define DB_PRINT(...) do { \ 27 if (ZYNQ_SLCR_ERR_DEBUG) { \ 28 fprintf(stderr, ": %s: ", __func__); \ 29 fprintf(stderr, ## __VA_ARGS__); \ 30 } \ 31 } while (0); 32 33 #define XILINX_LOCK_KEY 0x767b 34 #define XILINX_UNLOCK_KEY 0xdf0d 35 36 #define R_PSS_RST_CTRL_SOFT_RST 0x1 37 38 enum { 39 SCL = 0x000 / 4, 40 LOCK, 41 UNLOCK, 42 LOCKSTA, 43 44 ARM_PLL_CTRL = 0x100 / 4, 45 DDR_PLL_CTRL, 46 IO_PLL_CTRL, 47 PLL_STATUS, 48 ARM_PLL_CFG, 49 DDR_PLL_CFG, 50 IO_PLL_CFG, 51 52 ARM_CLK_CTRL = 0x120 / 4, 53 DDR_CLK_CTRL, 54 DCI_CLK_CTRL, 55 APER_CLK_CTRL, 56 USB0_CLK_CTRL, 57 USB1_CLK_CTRL, 58 GEM0_RCLK_CTRL, 59 GEM1_RCLK_CTRL, 60 GEM0_CLK_CTRL, 61 GEM1_CLK_CTRL, 62 SMC_CLK_CTRL, 63 LQSPI_CLK_CTRL, 64 SDIO_CLK_CTRL, 65 UART_CLK_CTRL, 66 SPI_CLK_CTRL, 67 CAN_CLK_CTRL, 68 CAN_MIOCLK_CTRL, 69 DBG_CLK_CTRL, 70 PCAP_CLK_CTRL, 71 TOPSW_CLK_CTRL, 72 73 #define FPGA_CTRL_REGS(n, start) \ 74 FPGA ## n ## _CLK_CTRL = (start) / 4, \ 75 FPGA ## n ## _THR_CTRL, \ 76 FPGA ## n ## _THR_CNT, \ 77 FPGA ## n ## _THR_STA, 78 FPGA_CTRL_REGS(0, 0x170) 79 FPGA_CTRL_REGS(1, 0x180) 80 FPGA_CTRL_REGS(2, 0x190) 81 FPGA_CTRL_REGS(3, 0x1a0) 82 83 BANDGAP_TRIP = 0x1b8 / 4, 84 PLL_PREDIVISOR = 0x1c0 / 4, 85 CLK_621_TRUE, 86 87 PSS_RST_CTRL = 0x200 / 4, 88 DDR_RST_CTRL, 89 TOPSW_RESET_CTRL, 90 DMAC_RST_CTRL, 91 USB_RST_CTRL, 92 GEM_RST_CTRL, 93 SDIO_RST_CTRL, 94 SPI_RST_CTRL, 95 CAN_RST_CTRL, 96 I2C_RST_CTRL, 97 UART_RST_CTRL, 98 GPIO_RST_CTRL, 99 LQSPI_RST_CTRL, 100 SMC_RST_CTRL, 101 OCM_RST_CTRL, 102 FPGA_RST_CTRL = 0x240 / 4, 103 A9_CPU_RST_CTRL, 104 105 RS_AWDT_CTRL = 0x24c / 4, 106 RST_REASON, 107 108 REBOOT_STATUS = 0x258 / 4, 109 BOOT_MODE, 110 111 APU_CTRL = 0x300 / 4, 112 WDT_CLK_SEL, 113 114 TZ_DMA_NS = 0x440 / 4, 115 TZ_DMA_IRQ_NS, 116 TZ_DMA_PERIPH_NS, 117 118 PSS_IDCODE = 0x530 / 4, 119 120 DDR_URGENT = 0x600 / 4, 121 DDR_CAL_START = 0x60c / 4, 122 DDR_REF_START = 0x614 / 4, 123 DDR_CMD_STA, 124 DDR_URGENT_SEL, 125 DDR_DFI_STATUS, 126 127 MIO = 0x700 / 4, 128 #define MIO_LENGTH 54 129 130 MIO_LOOPBACK = 0x804 / 4, 131 MIO_MST_TRI0, 132 MIO_MST_TRI1, 133 134 SD0_WP_CD_SEL = 0x830 / 4, 135 SD1_WP_CD_SEL, 136 137 LVL_SHFTR_EN = 0x900 / 4, 138 OCM_CFG = 0x910 / 4, 139 140 CPU_RAM = 0xa00 / 4, 141 142 IOU = 0xa30 / 4, 143 144 DMAC_RAM = 0xa50 / 4, 145 146 AFI0 = 0xa60 / 4, 147 AFI1 = AFI0 + 3, 148 AFI2 = AFI1 + 3, 149 AFI3 = AFI2 + 3, 150 #define AFI_LENGTH 3 151 152 OCM = 0xa90 / 4, 153 154 DEVCI_RAM = 0xaa0 / 4, 155 156 CSG_RAM = 0xab0 / 4, 157 158 GPIOB_CTRL = 0xb00 / 4, 159 GPIOB_CFG_CMOS18, 160 GPIOB_CFG_CMOS25, 161 GPIOB_CFG_CMOS33, 162 GPIOB_CFG_HSTL = 0xb14 / 4, 163 GPIOB_DRVR_BIAS_CTRL, 164 165 DDRIOB = 0xb40 / 4, 166 #define DDRIOB_LENGTH 14 167 }; 168 169 #define ZYNQ_SLCR_MMIO_SIZE 0x1000 170 #define ZYNQ_SLCR_NUM_REGS (ZYNQ_SLCR_MMIO_SIZE / 4) 171 172 #define TYPE_ZYNQ_SLCR "xilinx,zynq_slcr" 173 #define ZYNQ_SLCR(obj) OBJECT_CHECK(ZynqSLCRState, (obj), TYPE_ZYNQ_SLCR) 174 175 typedef struct ZynqSLCRState { 176 SysBusDevice parent_obj; 177 178 MemoryRegion iomem; 179 180 uint32_t regs[ZYNQ_SLCR_NUM_REGS]; 181 } ZynqSLCRState; 182 183 static void zynq_slcr_reset(DeviceState *d) 184 { 185 ZynqSLCRState *s = ZYNQ_SLCR(d); 186 int i; 187 188 DB_PRINT("RESET\n"); 189 190 s->regs[LOCKSTA] = 1; 191 /* 0x100 - 0x11C */ 192 s->regs[ARM_PLL_CTRL] = 0x0001A008; 193 s->regs[DDR_PLL_CTRL] = 0x0001A008; 194 s->regs[IO_PLL_CTRL] = 0x0001A008; 195 s->regs[PLL_STATUS] = 0x0000003F; 196 s->regs[ARM_PLL_CFG] = 0x00014000; 197 s->regs[DDR_PLL_CFG] = 0x00014000; 198 s->regs[IO_PLL_CFG] = 0x00014000; 199 200 /* 0x120 - 0x16C */ 201 s->regs[ARM_CLK_CTRL] = 0x1F000400; 202 s->regs[DDR_CLK_CTRL] = 0x18400003; 203 s->regs[DCI_CLK_CTRL] = 0x01E03201; 204 s->regs[APER_CLK_CTRL] = 0x01FFCCCD; 205 s->regs[USB0_CLK_CTRL] = s->regs[USB1_CLK_CTRL] = 0x00101941; 206 s->regs[GEM0_RCLK_CTRL] = s->regs[GEM1_RCLK_CTRL] = 0x00000001; 207 s->regs[GEM0_CLK_CTRL] = s->regs[GEM1_CLK_CTRL] = 0x00003C01; 208 s->regs[SMC_CLK_CTRL] = 0x00003C01; 209 s->regs[LQSPI_CLK_CTRL] = 0x00002821; 210 s->regs[SDIO_CLK_CTRL] = 0x00001E03; 211 s->regs[UART_CLK_CTRL] = 0x00003F03; 212 s->regs[SPI_CLK_CTRL] = 0x00003F03; 213 s->regs[CAN_CLK_CTRL] = 0x00501903; 214 s->regs[DBG_CLK_CTRL] = 0x00000F03; 215 s->regs[PCAP_CLK_CTRL] = 0x00000F01; 216 217 /* 0x170 - 0x1AC */ 218 s->regs[FPGA0_CLK_CTRL] = s->regs[FPGA1_CLK_CTRL] = s->regs[FPGA2_CLK_CTRL] 219 = s->regs[FPGA3_CLK_CTRL] = 0x00101800; 220 s->regs[FPGA0_THR_STA] = s->regs[FPGA1_THR_STA] = s->regs[FPGA2_THR_STA] 221 = s->regs[FPGA3_THR_STA] = 0x00010000; 222 223 /* 0x1B0 - 0x1D8 */ 224 s->regs[BANDGAP_TRIP] = 0x0000001F; 225 s->regs[PLL_PREDIVISOR] = 0x00000001; 226 s->regs[CLK_621_TRUE] = 0x00000001; 227 228 /* 0x200 - 0x25C */ 229 s->regs[FPGA_RST_CTRL] = 0x01F33F0F; 230 s->regs[RST_REASON] = 0x00000040; 231 232 s->regs[BOOT_MODE] = 0x00000001; 233 234 /* 0x700 - 0x7D4 */ 235 for (i = 0; i < 54; i++) { 236 s->regs[MIO + i] = 0x00001601; 237 } 238 for (i = 2; i <= 8; i++) { 239 s->regs[MIO + i] = 0x00000601; 240 } 241 242 s->regs[MIO_MST_TRI0] = s->regs[MIO_MST_TRI1] = 0xFFFFFFFF; 243 244 s->regs[CPU_RAM + 0] = s->regs[CPU_RAM + 1] = s->regs[CPU_RAM + 3] 245 = s->regs[CPU_RAM + 4] = s->regs[CPU_RAM + 7] 246 = 0x00010101; 247 s->regs[CPU_RAM + 2] = s->regs[CPU_RAM + 5] = 0x01010101; 248 s->regs[CPU_RAM + 6] = 0x00000001; 249 250 s->regs[IOU + 0] = s->regs[IOU + 1] = s->regs[IOU + 2] = s->regs[IOU + 3] 251 = 0x09090909; 252 s->regs[IOU + 4] = s->regs[IOU + 5] = 0x00090909; 253 s->regs[IOU + 6] = 0x00000909; 254 255 s->regs[DMAC_RAM] = 0x00000009; 256 257 s->regs[AFI0 + 0] = s->regs[AFI0 + 1] = 0x09090909; 258 s->regs[AFI1 + 0] = s->regs[AFI1 + 1] = 0x09090909; 259 s->regs[AFI2 + 0] = s->regs[AFI2 + 1] = 0x09090909; 260 s->regs[AFI3 + 0] = s->regs[AFI3 + 1] = 0x09090909; 261 s->regs[AFI0 + 2] = s->regs[AFI1 + 2] = s->regs[AFI2 + 2] 262 = s->regs[AFI3 + 2] = 0x00000909; 263 264 s->regs[OCM + 0] = 0x01010101; 265 s->regs[OCM + 1] = s->regs[OCM + 2] = 0x09090909; 266 267 s->regs[DEVCI_RAM] = 0x00000909; 268 s->regs[CSG_RAM] = 0x00000001; 269 270 s->regs[DDRIOB + 0] = s->regs[DDRIOB + 1] = s->regs[DDRIOB + 2] 271 = s->regs[DDRIOB + 3] = 0x00000e00; 272 s->regs[DDRIOB + 4] = s->regs[DDRIOB + 5] = s->regs[DDRIOB + 6] 273 = 0x00000e00; 274 s->regs[DDRIOB + 12] = 0x00000021; 275 } 276 277 278 static bool zynq_slcr_check_offset(hwaddr offset, bool rnw) 279 { 280 switch (offset) { 281 case LOCK: 282 case UNLOCK: 283 case DDR_CAL_START: 284 case DDR_REF_START: 285 return !rnw; /* Write only */ 286 case LOCKSTA: 287 case FPGA0_THR_STA: 288 case FPGA1_THR_STA: 289 case FPGA2_THR_STA: 290 case FPGA3_THR_STA: 291 case BOOT_MODE: 292 case PSS_IDCODE: 293 case DDR_CMD_STA: 294 case DDR_DFI_STATUS: 295 case PLL_STATUS: 296 return rnw;/* read only */ 297 case SCL: 298 case ARM_PLL_CTRL ... IO_PLL_CTRL: 299 case ARM_PLL_CFG ... IO_PLL_CFG: 300 case ARM_CLK_CTRL ... TOPSW_CLK_CTRL: 301 case FPGA0_CLK_CTRL ... FPGA0_THR_CNT: 302 case FPGA1_CLK_CTRL ... FPGA1_THR_CNT: 303 case FPGA2_CLK_CTRL ... FPGA2_THR_CNT: 304 case FPGA3_CLK_CTRL ... FPGA3_THR_CNT: 305 case BANDGAP_TRIP: 306 case PLL_PREDIVISOR: 307 case CLK_621_TRUE: 308 case PSS_RST_CTRL ... A9_CPU_RST_CTRL: 309 case RS_AWDT_CTRL: 310 case RST_REASON: 311 case REBOOT_STATUS: 312 case APU_CTRL: 313 case WDT_CLK_SEL: 314 case TZ_DMA_NS ... TZ_DMA_PERIPH_NS: 315 case DDR_URGENT: 316 case DDR_URGENT_SEL: 317 case MIO ... MIO + MIO_LENGTH - 1: 318 case MIO_LOOPBACK ... MIO_MST_TRI1: 319 case SD0_WP_CD_SEL: 320 case SD1_WP_CD_SEL: 321 case LVL_SHFTR_EN: 322 case OCM_CFG: 323 case CPU_RAM: 324 case IOU: 325 case DMAC_RAM: 326 case AFI0 ... AFI3 + AFI_LENGTH - 1: 327 case OCM: 328 case DEVCI_RAM: 329 case CSG_RAM: 330 case GPIOB_CTRL ... GPIOB_CFG_CMOS33: 331 case GPIOB_CFG_HSTL: 332 case GPIOB_DRVR_BIAS_CTRL: 333 case DDRIOB ... DDRIOB + DDRIOB_LENGTH - 1: 334 return true; 335 default: 336 return false; 337 } 338 } 339 340 static uint64_t zynq_slcr_read(void *opaque, hwaddr offset, 341 unsigned size) 342 { 343 ZynqSLCRState *s = opaque; 344 offset /= 4; 345 uint32_t ret = s->regs[offset]; 346 347 if (!zynq_slcr_check_offset(offset, true)) { 348 qemu_log_mask(LOG_GUEST_ERROR, "zynq_slcr: Invalid read access to " 349 " addr %" HWADDR_PRIx "\n", offset * 4); 350 } 351 352 DB_PRINT("addr: %08" HWADDR_PRIx " data: %08" PRIx32 "\n", offset * 4, ret); 353 return ret; 354 } 355 356 static void zynq_slcr_write(void *opaque, hwaddr offset, 357 uint64_t val, unsigned size) 358 { 359 ZynqSLCRState *s = (ZynqSLCRState *)opaque; 360 offset /= 4; 361 362 DB_PRINT("addr: %08" HWADDR_PRIx " data: %08" PRIx64 "\n", offset * 4, val); 363 364 if (!zynq_slcr_check_offset(offset, false)) { 365 qemu_log_mask(LOG_GUEST_ERROR, "zynq_slcr: Invalid write access to " 366 "addr %" HWADDR_PRIx "\n", offset * 4); 367 return; 368 } 369 370 switch (offset) { 371 case SCL: 372 s->regs[SCL] = val & 0x1; 373 return; 374 case LOCK: 375 if ((val & 0xFFFF) == XILINX_LOCK_KEY) { 376 DB_PRINT("XILINX LOCK 0xF8000000 + 0x%x <= 0x%x\n", (int)offset, 377 (unsigned)val & 0xFFFF); 378 s->regs[LOCKSTA] = 1; 379 } else { 380 DB_PRINT("WRONG XILINX LOCK KEY 0xF8000000 + 0x%x <= 0x%x\n", 381 (int)offset, (unsigned)val & 0xFFFF); 382 } 383 return; 384 case UNLOCK: 385 if ((val & 0xFFFF) == XILINX_UNLOCK_KEY) { 386 DB_PRINT("XILINX UNLOCK 0xF8000000 + 0x%x <= 0x%x\n", (int)offset, 387 (unsigned)val & 0xFFFF); 388 s->regs[LOCKSTA] = 0; 389 } else { 390 DB_PRINT("WRONG XILINX UNLOCK KEY 0xF8000000 + 0x%x <= 0x%x\n", 391 (int)offset, (unsigned)val & 0xFFFF); 392 } 393 return; 394 } 395 396 if (s->regs[LOCKSTA]) { 397 qemu_log_mask(LOG_GUEST_ERROR, 398 "SCLR registers are locked. Unlock them first\n"); 399 return; 400 } 401 s->regs[offset] = val; 402 403 switch (offset) { 404 case PSS_RST_CTRL: 405 if (val & R_PSS_RST_CTRL_SOFT_RST) { 406 qemu_system_reset_request(); 407 } 408 break; 409 } 410 } 411 412 static const MemoryRegionOps slcr_ops = { 413 .read = zynq_slcr_read, 414 .write = zynq_slcr_write, 415 .endianness = DEVICE_NATIVE_ENDIAN, 416 }; 417 418 static void zynq_slcr_init(Object *obj) 419 { 420 ZynqSLCRState *s = ZYNQ_SLCR(obj); 421 422 memory_region_init_io(&s->iomem, obj, &slcr_ops, s, "slcr", 423 ZYNQ_SLCR_MMIO_SIZE); 424 sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem); 425 } 426 427 static const VMStateDescription vmstate_zynq_slcr = { 428 .name = "zynq_slcr", 429 .version_id = 2, 430 .minimum_version_id = 2, 431 .fields = (VMStateField[]) { 432 VMSTATE_UINT32_ARRAY(regs, ZynqSLCRState, ZYNQ_SLCR_NUM_REGS), 433 VMSTATE_END_OF_LIST() 434 } 435 }; 436 437 static void zynq_slcr_class_init(ObjectClass *klass, void *data) 438 { 439 DeviceClass *dc = DEVICE_CLASS(klass); 440 441 dc->vmsd = &vmstate_zynq_slcr; 442 dc->reset = zynq_slcr_reset; 443 } 444 445 static const TypeInfo zynq_slcr_info = { 446 .class_init = zynq_slcr_class_init, 447 .name = TYPE_ZYNQ_SLCR, 448 .parent = TYPE_SYS_BUS_DEVICE, 449 .instance_size = sizeof(ZynqSLCRState), 450 .instance_init = zynq_slcr_init, 451 }; 452 453 static void zynq_slcr_register_types(void) 454 { 455 type_register_static(&zynq_slcr_info); 456 } 457 458 type_init(zynq_slcr_register_types) 459