xref: /openbmc/qemu/hw/misc/trace-events (revision 0fd61a2d)
1# See docs/devel/tracing.txt for syntax documentation.
2
3# eccmemctl.c
4ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x"
5ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x"
6ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status 0x%08x"
7ecc_mem_writel_vcr(uint32_t val) "Write slot configuration 0x%08x"
8ecc_mem_writel_dr(uint32_t val) "Write diagnostic 0x%08x"
9ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 0x%08x"
10ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 0x%08x"
11ecc_mem_readl_mer(uint32_t ret) "Read memory enable 0x%08x"
12ecc_mem_readl_mdr(uint32_t ret) "Read memory delay 0x%08x"
13ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status 0x%08x"
14ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration 0x%08x"
15ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 0x%08x"
16ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 0x%08x"
17ecc_mem_readl_dr(uint32_t ret) "Read diagnostic 0x%08x"
18ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 0x%08x"
19ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 0x%08x"
20ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = 0x%02x"
21ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= 0x%02x"
22
23# slavio_misc.c
24slavio_misc_update_irq_raise(void) "Raise IRQ"
25slavio_misc_update_irq_lower(void) "Lower IRQ"
26slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d"
27slavio_cfg_mem_writeb(uint32_t val) "Write config 0x%02x"
28slavio_cfg_mem_readb(uint32_t ret) "Read config 0x%02x"
29slavio_diag_mem_writeb(uint32_t val) "Write diag 0x%02x"
30slavio_diag_mem_readb(uint32_t ret) "Read diag 0x%02x"
31slavio_mdm_mem_writeb(uint32_t val) "Write modem control 0x%02x"
32slavio_mdm_mem_readb(uint32_t ret) "Read modem control 0x%02x"
33slavio_aux1_mem_writeb(uint32_t val) "Write aux1 0x%02x"
34slavio_aux1_mem_readb(uint32_t ret) "Read aux1 0x%02x"
35slavio_aux2_mem_writeb(uint32_t val) "Write aux2 0x%02x"
36slavio_aux2_mem_readb(uint32_t ret) "Read aux2 0x%02x"
37apc_mem_writeb(uint32_t val) "Write power management 0x%02x"
38apc_mem_readb(uint32_t ret) "Read power management 0x%02x"
39slavio_sysctrl_mem_writel(uint32_t val) "Write system control 0x%08x"
40slavio_sysctrl_mem_readl(uint32_t ret) "Read system control 0x%08x"
41slavio_led_mem_writew(uint32_t val) "Write diagnostic LED 0x%04x"
42slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED 0x%04x"
43
44# milkymist-hpdmc.c
45milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=0x%08x value=0x%08x"
46milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=0x%08x value=0x%08x"
47
48# milkymist-pfpu.c
49milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
50milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
51milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a 0x%08x b 0x%08x dma_ptr 0x%08x"
52milkymist_pfpu_pulse_irq(void) "Pulse IRQ"
53
54# aspeed_scu.c
55aspeed_scu_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
56
57# mps2-scc.c
58mps2_scc_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 SCC read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
59mps2_scc_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 SCC write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
60mps2_scc_reset(void) "MPS2 SCC: reset"
61mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2, char led1, char led0) "MPS2 SCC LEDs: %c%c%c%c%c%c%c%c"
62mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32
63mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32
64
65# mps2-fpgaio.c
66mps2_fpgaio_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
67mps2_fpgaio_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
68mps2_fpgaio_reset(void) "MPS2 FPGAIO: reset"
69mps2_fpgaio_leds(char led1, char led0) "MPS2 FPGAIO LEDs: %c%c"
70
71# msf2-sysreg.c
72msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" PRIx64 " data 0x%" PRIx32 " prev 0x%" PRIx32
73msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" PRIx64 " data 0x%08" PRIx32
74msf2_sysreg_write_pll_status(void) "Invalid write to read only PLL status register"
75
76# imx7_gpr.c
77imx7_gpr_read(uint64_t offset) "addr 0x%08" PRIx64
78imx7_gpr_write(uint64_t offset, uint64_t value) "addr 0x%08" PRIx64 "value 0x%08" PRIx64
79
80# mos6522.c
81mos6522_set_counter(int index, unsigned int val) "T%d.counter=%d"
82mos6522_get_next_irq_time(uint16_t latch, int64_t d, int64_t delta) "latch=%d counter=0x%"PRId64 " delta_next=0x%"PRId64
83mos6522_set_sr_int(void) "set sr_int"
84mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64
85mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x"
86
87# tz-mpc.c
88tz_mpc_reg_read(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs read: offset 0x%x data 0x%" PRIx64 " size %u"
89tz_mpc_reg_write(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs write: offset 0x%x data 0x%" PRIx64 " size %u"
90tz_mpc_mem_blocked_read(uint64_t addr, unsigned size, bool secure) "TZ MPC blocked read: offset 0x%" PRIx64 " size %u secure %d"
91tz_mpc_mem_blocked_write(uint64_t addr, uint64_t data, unsigned size, bool secure) "TZ MPC blocked write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u secure %d"
92tz_mpc_translate(uint64_t addr, int flags, const char *idx, const char *res) "TZ MPC translate: addr 0x%" PRIx64 " flags 0x%x iommu_idx %s: %s"
93tz_mpc_iommu_notify(uint64_t addr) "TZ MPC iommu: notifying UNMAP/MAP for 0x%" PRIx64
94
95# tz-msc.c
96tz_msc_reset(void) "TZ MSC: reset"
97tz_msc_cfg_nonsec(int level) "TZ MSC: cfg_nonsec = %d"
98tz_msc_cfg_sec_resp(int level) "TZ MSC: cfg_sec_resp = %d"
99tz_msc_irq_clear(int level) "TZ MSC: int_clear = %d"
100tz_msc_update_irq(int level) "TZ MSC: setting irq line to %d"
101tz_msc_access_blocked(uint64_t offset) "TZ MSC: offset 0x%" PRIx64 " access blocked"
102
103# tz-ppc.c
104tz_ppc_reset(void) "TZ PPC: reset"
105tz_ppc_cfg_nonsec(int n, int level) "TZ PPC: cfg_nonsec[%d] = %d"
106tz_ppc_cfg_ap(int n, int level) "TZ PPC: cfg_ap[%d] = %d"
107tz_ppc_cfg_sec_resp(int level) "TZ PPC: cfg_sec_resp = %d"
108tz_ppc_irq_enable(int level) "TZ PPC: int_enable = %d"
109tz_ppc_irq_clear(int level) "TZ PPC: int_clear = %d"
110tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d"
111tz_ppc_read_blocked(int n, uint64_t offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" PRIx64 " read (secure %d user %d) blocked"
112tz_ppc_write_blocked(int n, uint64_t offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" PRIx64 " write (secure %d user %d) blocked"
113
114# iotkit-secctl.c
115iotkit_secctl_s_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs read: offset 0x%x data 0x%" PRIx64 " size %u"
116iotkit_secctl_s_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs write: offset 0x%x data 0x%" PRIx64 " size %u"
117iotkit_secctl_ns_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs read: offset 0x%x data 0x%" PRIx64 " size %u"
118iotkit_secctl_ns_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs write: offset 0x%x data 0x%" PRIx64 " size %u"
119
120# imx6ul_ccm.c
121ccm_entry(void) ""
122ccm_freq(uint32_t freq) "freq = %d"
123ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d"
124ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32
125ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32
126
127# iotkit-sysinfo.c
128iotkit_sysinfo_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
129iotkit_sysinfo_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
130
131# iotkit-sysctl.c
132iotkit_sysctl_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysCtl read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
133iotkit_sysctl_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysCtl write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
134iotkit_sysctl_reset(void) "IoTKit SysCtl: reset"
135
136# armsse-cpuid.c
137armsse_cpuid_read(uint64_t offset, uint64_t data, unsigned size) "SSE-200 CPU_IDENTITY read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
138armsse_cpuid_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 CPU_IDENTITY write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
139
140# armsse-mhu.c
141armsse_mhu_read(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
142armsse_mhu_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
143
144# aspeed_xdma.c
145aspeed_xdma_write(uint64_t offset, uint64_t data) "XDMA write: offset 0x%" PRIx64 " data 0x%" PRIx64
146
147# bcm2835_mbox.c
148bcm2835_mbox_write(unsigned int size, uint64_t addr, uint64_t value) "mbox write sz:%u addr:0x%"PRIx64" data:0x%"PRIx64
149bcm2835_mbox_read(unsigned int size, uint64_t addr, uint64_t value) "mbox read sz:%u addr:0x%"PRIx64" data:0x%"PRIx64
150bcm2835_mbox_irq(unsigned level) "mbox irq:ARM level:%u"
151bcm2835_mbox_property(uint32_t tag, uint32_t bufsize, size_t resplen) "mbox property tag:0x%08x in_sz:%u out_sz:%zu"
152