1 /* 2 * PowerMac NewWorld MacIO GPIO emulation 3 * 4 * Copyright (c) 2016 Benjamin Herrenschmidt 5 * Copyright (c) 2018 Mark Cave-Ayland 6 * 7 * Permission is hereby granted, free of charge, to any person obtaining a copy 8 * of this software and associated documentation files (the "Software"), to deal 9 * in the Software without restriction, including without limitation the rights 10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 11 * copies of the Software, and to permit persons to whom the Software is 12 * furnished to do so, subject to the following conditions: 13 * 14 * The above copyright notice and this permission notice shall be included in 15 * all copies or substantial portions of the Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 23 * THE SOFTWARE. 24 */ 25 26 #include "qemu/osdep.h" 27 #include "hw/ppc/mac.h" 28 #include "hw/qdev-properties.h" 29 #include "migration/vmstate.h" 30 #include "hw/misc/macio/macio.h" 31 #include "hw/misc/macio/gpio.h" 32 #include "hw/nmi.h" 33 #include "qemu/log.h" 34 #include "qemu/module.h" 35 #include "trace.h" 36 37 38 void macio_set_gpio(MacIOGPIOState *s, uint32_t gpio, bool state) 39 { 40 uint8_t new_reg; 41 42 trace_macio_set_gpio(gpio, state); 43 44 if (s->gpio_regs[gpio] & 4) { 45 qemu_log_mask(LOG_GUEST_ERROR, 46 "GPIO: Setting GPIO %d while it's an output\n", gpio); 47 } 48 49 new_reg = s->gpio_regs[gpio] & ~2; 50 if (state) { 51 new_reg |= 2; 52 } 53 54 if (new_reg == s->gpio_regs[gpio]) { 55 return; 56 } 57 58 s->gpio_regs[gpio] = new_reg; 59 60 /* 61 * Note that we probably need to get access to the MPIC config to 62 * decode polarity since qemu always use "raise" regardless. 63 * 64 * For now, we hard wire known GPIOs 65 */ 66 67 switch (gpio) { 68 case 1: 69 /* Level low */ 70 if (!state) { 71 trace_macio_gpio_irq_assert(gpio); 72 qemu_irq_raise(s->gpio_extirqs[gpio]); 73 } else { 74 trace_macio_gpio_irq_deassert(gpio); 75 qemu_irq_lower(s->gpio_extirqs[gpio]); 76 } 77 break; 78 79 case 9: 80 /* Edge, triggered by NMI below */ 81 if (state) { 82 trace_macio_gpio_irq_assert(gpio); 83 qemu_irq_raise(s->gpio_extirqs[gpio]); 84 } else { 85 trace_macio_gpio_irq_deassert(gpio); 86 qemu_irq_lower(s->gpio_extirqs[gpio]); 87 } 88 break; 89 90 default: 91 qemu_log_mask(LOG_UNIMP, "GPIO: setting unimplemented GPIO %d", gpio); 92 } 93 } 94 95 static void macio_gpio_write(void *opaque, hwaddr addr, uint64_t value, 96 unsigned size) 97 { 98 MacIOGPIOState *s = opaque; 99 uint8_t ibit; 100 101 trace_macio_gpio_write(addr, value); 102 103 /* Levels regs are read-only */ 104 if (addr < 8) { 105 return; 106 } 107 108 addr -= 8; 109 if (addr < 36) { 110 value &= ~2; 111 112 if (value & 4) { 113 ibit = (value & 1) << 1; 114 } else { 115 ibit = s->gpio_regs[addr] & 2; 116 } 117 118 s->gpio_regs[addr] = value | ibit; 119 } 120 } 121 122 static uint64_t macio_gpio_read(void *opaque, hwaddr addr, unsigned size) 123 { 124 MacIOGPIOState *s = opaque; 125 uint64_t val = 0; 126 127 /* Levels regs */ 128 if (addr < 8) { 129 val = s->gpio_levels[addr]; 130 } else { 131 addr -= 8; 132 133 if (addr < 36) { 134 val = s->gpio_regs[addr]; 135 } 136 } 137 138 trace_macio_gpio_write(addr, val); 139 return val; 140 } 141 142 static const MemoryRegionOps macio_gpio_ops = { 143 .read = macio_gpio_read, 144 .write = macio_gpio_write, 145 .endianness = DEVICE_LITTLE_ENDIAN, 146 .impl = { 147 .min_access_size = 1, 148 .max_access_size = 1, 149 }, 150 }; 151 152 static void macio_gpio_init(Object *obj) 153 { 154 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 155 MacIOGPIOState *s = MACIO_GPIO(obj); 156 int i; 157 158 for (i = 0; i < 10; i++) { 159 sysbus_init_irq(sbd, &s->gpio_extirqs[i]); 160 } 161 162 memory_region_init_io(&s->gpiomem, OBJECT(s), &macio_gpio_ops, obj, 163 "gpio", 0x30); 164 sysbus_init_mmio(sbd, &s->gpiomem); 165 } 166 167 static const VMStateDescription vmstate_macio_gpio = { 168 .name = "macio_gpio", 169 .version_id = 0, 170 .minimum_version_id = 0, 171 .fields = (VMStateField[]) { 172 VMSTATE_UINT8_ARRAY(gpio_levels, MacIOGPIOState, 8), 173 VMSTATE_UINT8_ARRAY(gpio_regs, MacIOGPIOState, 36), 174 VMSTATE_END_OF_LIST() 175 } 176 }; 177 178 static void macio_gpio_reset(DeviceState *dev) 179 { 180 MacIOGPIOState *s = MACIO_GPIO(dev); 181 182 /* GPIO 1 is up by default */ 183 macio_set_gpio(s, 1, true); 184 } 185 186 static void macio_gpio_nmi(NMIState *n, int cpu_index, Error **errp) 187 { 188 macio_set_gpio(MACIO_GPIO(n), 9, true); 189 macio_set_gpio(MACIO_GPIO(n), 9, false); 190 } 191 192 static void macio_gpio_class_init(ObjectClass *oc, void *data) 193 { 194 DeviceClass *dc = DEVICE_CLASS(oc); 195 NMIClass *nc = NMI_CLASS(oc); 196 197 dc->reset = macio_gpio_reset; 198 dc->vmsd = &vmstate_macio_gpio; 199 nc->nmi_monitor_handler = macio_gpio_nmi; 200 } 201 202 static const TypeInfo macio_gpio_init_info = { 203 .name = TYPE_MACIO_GPIO, 204 .parent = TYPE_SYS_BUS_DEVICE, 205 .instance_size = sizeof(MacIOGPIOState), 206 .instance_init = macio_gpio_init, 207 .class_init = macio_gpio_class_init, 208 .interfaces = (InterfaceInfo[]) { 209 { TYPE_NMI }, 210 { } 211 }, 212 }; 213 214 static void macio_gpio_register_types(void) 215 { 216 type_register_static(&macio_gpio_init_info); 217 } 218 219 type_init(macio_gpio_register_types) 220