1 /* 2 * QEMU m68k Macintosh VIA device support 3 * 4 * Copyright (c) 2011-2018 Laurent Vivier 5 * Copyright (c) 2018 Mark Cave-Ayland 6 * 7 * Some parts from hw/misc/macio/cuda.c 8 * 9 * Copyright (c) 2004-2007 Fabrice Bellard 10 * Copyright (c) 2007 Jocelyn Mayer 11 * 12 * some parts from linux-2.6.29, arch/m68k/include/asm/mac_via.h 13 * 14 * This work is licensed under the terms of the GNU GPL, version 2 or later. 15 * See the COPYING file in the top-level directory. 16 */ 17 18 #include "qemu/osdep.h" 19 #include "qemu-common.h" 20 #include "migration/vmstate.h" 21 #include "hw/sysbus.h" 22 #include "hw/irq.h" 23 #include "qemu/timer.h" 24 #include "hw/misc/mac_via.h" 25 #include "hw/misc/mos6522.h" 26 #include "hw/input/adb.h" 27 #include "sysemu/runstate.h" 28 #include "qapi/error.h" 29 #include "qemu/cutils.h" 30 #include "hw/qdev-properties.h" 31 #include "sysemu/block-backend.h" 32 #include "trace.h" 33 #include "qemu/log.h" 34 35 /* 36 * VIAs: There are two in every machine, 37 */ 38 39 #define VIA_SIZE (0x2000) 40 41 /* 42 * Not all of these are true post MacII I think. 43 * CSA: probably the ones CHRP marks as 'unused' change purposes 44 * when the IWM becomes the SWIM. 45 * http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html 46 * ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf 47 * 48 * also, http://developer.apple.com/technotes/hw/hw_09.html claims the 49 * following changes for IIfx: 50 * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP. 51 * Also, "All of the functionality of VIA2 has been moved to other chips". 52 */ 53 54 #define VIA1A_vSccWrReq 0x80 /* 55 * SCC write. (input) 56 * [CHRP] SCC WREQ: Reflects the state of the 57 * Wait/Request pins from the SCC. 58 * [Macintosh Family Hardware] 59 * as CHRP on SE/30,II,IIx,IIcx,IIci. 60 * on IIfx, "0 means an active request" 61 */ 62 #define VIA1A_vRev8 0x40 /* 63 * Revision 8 board ??? 64 * [CHRP] En WaitReqB: Lets the WaitReq_L 65 * signal from port B of the SCC appear on 66 * the PA7 input pin. Output. 67 * [Macintosh Family] On the SE/30, this 68 * is the bit to flip screen buffers. 69 * 0=alternate, 1=main. 70 * on II,IIx,IIcx,IIci,IIfx this is a bit 71 * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx 72 */ 73 #define VIA1A_vHeadSel 0x20 /* 74 * Head select for IWM. 75 * [CHRP] unused. 76 * [Macintosh Family] "Floppy disk 77 * state-control line SEL" on all but IIfx 78 */ 79 #define VIA1A_vOverlay 0x10 /* 80 * [Macintosh Family] On SE/30,II,IIx,IIcx 81 * this bit enables the "Overlay" address 82 * map in the address decoders as it is on 83 * reset for mapping the ROM over the reset 84 * vector. 1=use overlay map. 85 * On the IIci,IIfx it is another bit of the 86 * CPU ID: 0=normal IIci, 1=IIci with parity 87 * feature or IIfx. 88 * [CHRP] En WaitReqA: Lets the WaitReq_L 89 * signal from port A of the SCC appear 90 * on the PA7 input pin (CHRP). Output. 91 * [MkLinux] "Drive Select" 92 * (with 0x20 being 'disk head select') 93 */ 94 #define VIA1A_vSync 0x08 /* 95 * [CHRP] Sync Modem: modem clock select: 96 * 1: select the external serial clock to 97 * drive the SCC's /RTxCA pin. 98 * 0: Select the 3.6864MHz clock to drive 99 * the SCC cell. 100 * [Macintosh Family] Correct on all but IIfx 101 */ 102 103 /* 104 * Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control 105 * on Macs which had the PWM sound hardware. Reserved on newer models. 106 * On IIci,IIfx, bits 1-2 are the rest of the CPU ID: 107 * bit 2: 1=IIci, 0=IIfx 108 * bit 1: 1 on both IIci and IIfx. 109 * MkLinux sez bit 0 is 'burnin flag' in this case. 110 * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as 111 * inputs, these bits will read 0. 112 */ 113 #define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */ 114 #define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */ 115 #define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */ 116 #define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */ 117 #define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */ 118 119 /* 120 * Info on VIA1B is from Macintosh Family Hardware & MkLinux. 121 * CHRP offers no info. 122 */ 123 #define VIA1B_vSound 0x80 /* 124 * Sound enable (for compatibility with 125 * PWM hardware) 0=enabled. 126 * Also, on IIci w/parity, shows parity error 127 * 0=error, 1=OK. 128 */ 129 #define VIA1B_vMystery 0x40 /* 130 * On IIci, parity enable. 0=enabled,1=disabled 131 * On SE/30, vertical sync interrupt enable. 132 * 0=enabled. This vSync interrupt shows up 133 * as a slot $E interrupt. 134 */ 135 #define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */ 136 #define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */ 137 #define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/ 138 #define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */ 139 #define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */ 140 #define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */ 141 142 /* 143 * VIA2 A register is the interrupt lines raised off the nubus 144 * slots. 145 * The below info is from 'Macintosh Family Hardware.' 146 * MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.' 147 * It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and 148 * defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike. 149 * Perhaps OSS uses vRAM1 and vRAM2 for ADB. 150 */ 151 152 #define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */ 153 #define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */ 154 #define VIA2A_vIRQE 0x20 /* IRQ from slot $E */ 155 #define VIA2A_vIRQD 0x10 /* IRQ from slot $D */ 156 #define VIA2A_vIRQC 0x08 /* IRQ from slot $C */ 157 #define VIA2A_vIRQB 0x04 /* IRQ from slot $B */ 158 #define VIA2A_vIRQA 0x02 /* IRQ from slot $A */ 159 #define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */ 160 161 /* 162 * RAM size bits decoded as follows: 163 * bit1 bit0 size of ICs in bank A 164 * 0 0 256 kbit 165 * 0 1 1 Mbit 166 * 1 0 4 Mbit 167 * 1 1 16 Mbit 168 */ 169 170 /* 171 * Register B has the fun stuff in it 172 */ 173 174 #define VIA2B_vVBL 0x80 /* 175 * VBL output to VIA1 (60.15Hz) driven by 176 * timer T1. 177 * on IIci, parity test: 0=test mode. 178 * [MkLinux] RBV_PARODD: 1=odd,0=even. 179 */ 180 #define VIA2B_vSndJck 0x40 /* 181 * External sound jack status. 182 * 0=plug is inserted. On SE/30, always 0 183 */ 184 #define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */ 185 #define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */ 186 #define VIA2B_vMode32 0x08 /* 187 * 24/32bit switch - doubles as cache flush 188 * on II, AMU/PMMU control. 189 * if AMU, 0=24bit to 32bit translation 190 * if PMMU, 1=PMMU is accessing page table. 191 * on SE/30 tied low. 192 * on IIx,IIcx,IIfx, unused. 193 * on IIci/RBV, cache control. 0=flush cache. 194 */ 195 #define VIA2B_vPower 0x04 /* 196 * Power off, 0=shut off power. 197 * on SE/30 this signal sent to PDS card. 198 */ 199 #define VIA2B_vBusLk 0x02 /* 200 * Lock NuBus transactions, 0=locked. 201 * on SE/30 sent to PDS card. 202 */ 203 #define VIA2B_vCDis 0x01 /* 204 * Cache control. On IIci, 1=disable cache card 205 * on others, 0=disable processor's instruction 206 * and data caches. 207 */ 208 209 /* interrupt flags */ 210 211 #define IRQ_SET 0x80 212 213 /* common */ 214 215 #define VIA_IRQ_TIMER1 0x40 216 #define VIA_IRQ_TIMER2 0x20 217 218 /* 219 * Apple sez: http://developer.apple.com/technotes/ov/ov_04.html 220 * Another example of a valid function that has no ROM support is the use 221 * of the alternate video page for page-flipping animation. Since there 222 * is no ROM call to flip pages, it is necessary to go play with the 223 * right bit in the VIA chip (6522 Versatile Interface Adapter). 224 * [CSA: don't know which one this is, but it's one of 'em!] 225 */ 226 227 /* 228 * 6522 registers - see databook. 229 * CSA: Assignments for VIA1 confirmed from CHRP spec. 230 */ 231 232 /* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */ 233 /* Note: 15 VIA regs, 8 RBV regs */ 234 235 #define vBufB 0x0000 /* [VIA/RBV] Register B */ 236 #define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */ 237 #define vDirB 0x0400 /* [VIA only] Data Direction Register B. */ 238 #define vDirA 0x0600 /* [VIA only] Data Direction Register A. */ 239 #define vT1CL 0x0800 /* [VIA only] Timer one counter low. */ 240 #define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */ 241 #define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */ 242 #define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */ 243 #define vT2CL 0x1000 /* [VIA only] Timer two counter low. */ 244 #define vT2CH 0x1200 /* [VIA only] Timer two counter high. */ 245 #define vSR 0x1400 /* [VIA only] Shift register. */ 246 #define vACR 0x1600 /* [VIA only] Auxilary control register. */ 247 #define vPCR 0x1800 /* [VIA only] Peripheral control register. */ 248 /* 249 * CHRP sez never ever to *write* this. 250 * Mac family says never to *change* this. 251 * In fact we need to initialize it once at start. 252 */ 253 #define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */ 254 #define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */ 255 #define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */ 256 257 /* from linux 2.6 drivers/macintosh/via-macii.c */ 258 259 /* Bits in ACR */ 260 261 #define VIA1ACR_vShiftCtrl 0x1c /* Shift register control bits */ 262 #define VIA1ACR_vShiftExtClk 0x0c /* Shift on external clock */ 263 #define VIA1ACR_vShiftOut 0x10 /* Shift out if 1 */ 264 265 /* 266 * Apple Macintosh Family Hardware Refenece 267 * Table 19-10 ADB transaction states 268 */ 269 270 #define ADB_STATE_NEW 0 271 #define ADB_STATE_EVEN 1 272 #define ADB_STATE_ODD 2 273 #define ADB_STATE_IDLE 3 274 275 #define VIA1B_vADB_StateMask (VIA1B_vADBS1 | VIA1B_vADBS2) 276 #define VIA1B_vADB_StateShift 4 277 278 #define VIA_TIMER_FREQ (783360) 279 #define VIA_ADB_POLL_FREQ 50 /* XXX: not real */ 280 281 /* VIA returns time offset from Jan 1, 1904, not 1970 */ 282 #define RTC_OFFSET 2082844800 283 284 enum { 285 REG_0, 286 REG_1, 287 REG_2, 288 REG_3, 289 REG_TEST, 290 REG_WPROTECT, 291 REG_PRAM_ADDR, 292 REG_PRAM_ADDR_LAST = REG_PRAM_ADDR + 19, 293 REG_PRAM_SECT, 294 REG_PRAM_SECT_LAST = REG_PRAM_SECT + 7, 295 REG_INVALID, 296 REG_EMPTY = 0xff, 297 }; 298 299 static void via1_VBL_update(MOS6522Q800VIA1State *v1s) 300 { 301 MOS6522State *s = MOS6522(v1s); 302 303 /* 60 Hz irq */ 304 v1s->next_VBL = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 16630) / 305 16630 * 16630; 306 307 if (s->ier & VIA1_IRQ_VBLANK) { 308 timer_mod(v1s->VBL_timer, v1s->next_VBL); 309 } else { 310 timer_del(v1s->VBL_timer); 311 } 312 } 313 314 static void via1_one_second_update(MOS6522Q800VIA1State *v1s) 315 { 316 MOS6522State *s = MOS6522(v1s); 317 318 v1s->next_second = (qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 1000) / 319 1000 * 1000; 320 if (s->ier & VIA1_IRQ_ONE_SECOND) { 321 timer_mod(v1s->one_second_timer, v1s->next_second); 322 } else { 323 timer_del(v1s->one_second_timer); 324 } 325 } 326 327 static void via1_VBL(void *opaque) 328 { 329 MOS6522Q800VIA1State *v1s = opaque; 330 MOS6522State *s = MOS6522(v1s); 331 MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s); 332 333 s->ifr |= VIA1_IRQ_VBLANK; 334 mdc->update_irq(s); 335 336 via1_VBL_update(v1s); 337 } 338 339 static void via1_one_second(void *opaque) 340 { 341 MOS6522Q800VIA1State *v1s = opaque; 342 MOS6522State *s = MOS6522(v1s); 343 MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s); 344 345 s->ifr |= VIA1_IRQ_ONE_SECOND; 346 mdc->update_irq(s); 347 348 via1_one_second_update(v1s); 349 } 350 351 static void via1_irq_request(void *opaque, int irq, int level) 352 { 353 MOS6522Q800VIA1State *v1s = opaque; 354 MOS6522State *s = MOS6522(v1s); 355 MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s); 356 357 if (level) { 358 s->ifr |= 1 << irq; 359 } else { 360 s->ifr &= ~(1 << irq); 361 } 362 363 mdc->update_irq(s); 364 } 365 366 static void via2_irq_request(void *opaque, int irq, int level) 367 { 368 MOS6522Q800VIA2State *v2s = opaque; 369 MOS6522State *s = MOS6522(v2s); 370 MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s); 371 372 if (level) { 373 s->ifr |= 1 << irq; 374 } else { 375 s->ifr &= ~(1 << irq); 376 } 377 378 mdc->update_irq(s); 379 } 380 381 382 static void pram_update(MacVIAState *m) 383 { 384 if (m->blk) { 385 if (blk_pwrite(m->blk, 0, m->mos6522_via1.PRAM, 386 sizeof(m->mos6522_via1.PRAM), 0) < 0) { 387 qemu_log("pram_update: cannot write to file\n"); 388 } 389 } 390 } 391 392 /* 393 * RTC Commands 394 * 395 * Command byte Register addressed by the command 396 * 397 * z0000001 Seconds register 0 (lowest-order byte) 398 * z0000101 Seconds register 1 399 * z0001001 Seconds register 2 400 * z0001101 Seconds register 3 (highest-order byte) 401 * 00110001 Test register (write-only) 402 * 00110101 Write-Protect Register (write-only) 403 * z010aa01 RAM address 100aa ($10-$13) (first 20 bytes only) 404 * z1aaaa01 RAM address 0aaaa ($00-$0F) (first 20 bytes only) 405 * z0111aaa Extended memory designator and sector number 406 * 407 * For a read request, z=1, for a write z=0 408 * The letter a indicates bits whose value depend on what parameter 409 * RAM byte you want to address 410 */ 411 static int via1_rtc_compact_cmd(uint8_t value) 412 { 413 uint8_t read = value & 0x80; 414 415 value &= 0x7f; 416 417 /* the last 2 bits of a command byte must always be 0b01 ... */ 418 if ((value & 0x78) == 0x38) { 419 /* except for the extended memory designator */ 420 return read | (REG_PRAM_SECT + (value & 0x07)); 421 } 422 if ((value & 0x03) == 0x01) { 423 value >>= 2; 424 if ((value & 0x1c) == 0) { 425 /* seconds registers */ 426 return read | (REG_0 + (value & 0x03)); 427 } else if ((value == 0x0c) && !read) { 428 return REG_TEST; 429 } else if ((value == 0x0d) && !read) { 430 return REG_WPROTECT; 431 } else if ((value & 0x1c) == 0x08) { 432 /* RAM address 0x10 to 0x13 */ 433 return read | (REG_PRAM_ADDR + 0x10 + (value & 0x03)); 434 } else if ((value & 0x43) == 0x41) { 435 /* RAM address 0x00 to 0x0f */ 436 return read | (REG_PRAM_ADDR + (value & 0x0f)); 437 } 438 } 439 return REG_INVALID; 440 } 441 442 static void via1_rtc_update(MacVIAState *m) 443 { 444 MOS6522Q800VIA1State *v1s = &m->mos6522_via1; 445 MOS6522State *s = MOS6522(v1s); 446 int cmd, sector, addr; 447 uint32_t time; 448 449 if (s->b & VIA1B_vRTCEnb) { 450 return; 451 } 452 453 if (s->dirb & VIA1B_vRTCData) { 454 /* send bits to the RTC */ 455 if (!(v1s->last_b & VIA1B_vRTCClk) && (s->b & VIA1B_vRTCClk)) { 456 m->data_out <<= 1; 457 m->data_out |= s->b & VIA1B_vRTCData; 458 m->data_out_cnt++; 459 } 460 trace_via1_rtc_update_data_out(m->data_out_cnt, m->data_out); 461 } else { 462 trace_via1_rtc_update_data_in(m->data_in_cnt, m->data_in); 463 /* receive bits from the RTC */ 464 if ((v1s->last_b & VIA1B_vRTCClk) && 465 !(s->b & VIA1B_vRTCClk) && 466 m->data_in_cnt) { 467 s->b = (s->b & ~VIA1B_vRTCData) | 468 ((m->data_in >> 7) & VIA1B_vRTCData); 469 m->data_in <<= 1; 470 m->data_in_cnt--; 471 } 472 return; 473 } 474 475 if (m->data_out_cnt != 8) { 476 return; 477 } 478 479 m->data_out_cnt = 0; 480 481 trace_via1_rtc_internal_status(m->cmd, m->alt, m->data_out); 482 /* first byte: it's a command */ 483 if (m->cmd == REG_EMPTY) { 484 485 cmd = via1_rtc_compact_cmd(m->data_out); 486 trace_via1_rtc_internal_cmd(cmd); 487 488 if (cmd == REG_INVALID) { 489 trace_via1_rtc_cmd_invalid(m->data_out); 490 return; 491 } 492 493 if (cmd & 0x80) { /* this is a read command */ 494 switch (cmd & 0x7f) { 495 case REG_0...REG_3: /* seconds registers */ 496 /* 497 * register 0 is lowest-order byte 498 * register 3 is highest-order byte 499 */ 500 501 time = m->tick_offset + (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) 502 / NANOSECONDS_PER_SECOND); 503 trace_via1_rtc_internal_time(time); 504 m->data_in = (time >> ((cmd & 0x03) << 3)) & 0xff; 505 m->data_in_cnt = 8; 506 trace_via1_rtc_cmd_seconds_read((cmd & 0x7f) - REG_0, 507 m->data_in); 508 break; 509 case REG_PRAM_ADDR...REG_PRAM_ADDR_LAST: 510 /* PRAM address 0x00 -> 0x13 */ 511 m->data_in = v1s->PRAM[(cmd & 0x7f) - REG_PRAM_ADDR]; 512 m->data_in_cnt = 8; 513 trace_via1_rtc_cmd_pram_read((cmd & 0x7f) - REG_PRAM_ADDR, 514 m->data_in); 515 break; 516 case REG_PRAM_SECT...REG_PRAM_SECT_LAST: 517 /* 518 * extended memory designator and sector number 519 * the only two-byte read command 520 */ 521 trace_via1_rtc_internal_set_cmd(cmd); 522 m->cmd = cmd; 523 break; 524 default: 525 g_assert_not_reached(); 526 break; 527 } 528 return; 529 } 530 531 /* this is a write command, needs a parameter */ 532 if (cmd == REG_WPROTECT || !m->wprotect) { 533 trace_via1_rtc_internal_set_cmd(cmd); 534 m->cmd = cmd; 535 } else { 536 trace_via1_rtc_internal_ignore_cmd(cmd); 537 } 538 return; 539 } 540 541 /* second byte: it's a parameter */ 542 if (m->alt == REG_EMPTY) { 543 switch (m->cmd & 0x7f) { 544 case REG_0...REG_3: /* seconds register */ 545 /* FIXME */ 546 trace_via1_rtc_cmd_seconds_write(m->cmd - REG_0, m->data_out); 547 m->cmd = REG_EMPTY; 548 break; 549 case REG_TEST: 550 /* device control: nothing to do */ 551 trace_via1_rtc_cmd_test_write(m->data_out); 552 m->cmd = REG_EMPTY; 553 break; 554 case REG_WPROTECT: 555 /* Write Protect register */ 556 trace_via1_rtc_cmd_wprotect_write(m->data_out); 557 m->wprotect = !!(m->data_out & 0x80); 558 m->cmd = REG_EMPTY; 559 break; 560 case REG_PRAM_ADDR...REG_PRAM_ADDR_LAST: 561 /* PRAM address 0x00 -> 0x13 */ 562 trace_via1_rtc_cmd_pram_write(m->cmd - REG_PRAM_ADDR, m->data_out); 563 v1s->PRAM[m->cmd - REG_PRAM_ADDR] = m->data_out; 564 pram_update(m); 565 m->cmd = REG_EMPTY; 566 break; 567 case REG_PRAM_SECT...REG_PRAM_SECT_LAST: 568 addr = (m->data_out >> 2) & 0x1f; 569 sector = (m->cmd & 0x7f) - REG_PRAM_SECT; 570 if (m->cmd & 0x80) { 571 /* it's a read */ 572 m->data_in = v1s->PRAM[sector * 32 + addr]; 573 m->data_in_cnt = 8; 574 trace_via1_rtc_cmd_pram_sect_read(sector, addr, 575 sector * 32 + addr, 576 m->data_in); 577 m->cmd = REG_EMPTY; 578 } else { 579 /* it's a write, we need one more parameter */ 580 trace_via1_rtc_internal_set_alt(addr, sector, addr); 581 m->alt = addr; 582 } 583 break; 584 default: 585 g_assert_not_reached(); 586 break; 587 } 588 return; 589 } 590 591 /* third byte: it's the data of a REG_PRAM_SECT write */ 592 g_assert(REG_PRAM_SECT <= m->cmd && m->cmd <= REG_PRAM_SECT_LAST); 593 sector = m->cmd - REG_PRAM_SECT; 594 v1s->PRAM[sector * 32 + m->alt] = m->data_out; 595 pram_update(m); 596 trace_via1_rtc_cmd_pram_sect_write(sector, m->alt, sector * 32 + m->alt, 597 m->data_out); 598 m->alt = REG_EMPTY; 599 m->cmd = REG_EMPTY; 600 } 601 602 static int adb_via_poll(MacVIAState *s, int state, uint8_t *data) 603 { 604 if (state != ADB_STATE_IDLE) { 605 return 0; 606 } 607 608 if (s->adb_data_in_size < s->adb_data_in_index) { 609 return 0; 610 } 611 612 if (s->adb_data_out_index != 0) { 613 return 0; 614 } 615 616 s->adb_data_in_index = 0; 617 s->adb_data_out_index = 0; 618 s->adb_data_in_size = adb_poll(&s->adb_bus, s->adb_data_in, 0xffff); 619 620 if (s->adb_data_in_size) { 621 *data = s->adb_data_in[s->adb_data_in_index++]; 622 qemu_irq_raise(s->adb_data_ready); 623 } 624 625 return s->adb_data_in_size; 626 } 627 628 static int adb_via_send(MacVIAState *s, int state, uint8_t data) 629 { 630 switch (state) { 631 case ADB_STATE_NEW: 632 s->adb_data_out_index = 0; 633 break; 634 case ADB_STATE_EVEN: 635 if ((s->adb_data_out_index & 1) == 0) { 636 return 0; 637 } 638 break; 639 case ADB_STATE_ODD: 640 if (s->adb_data_out_index & 1) { 641 return 0; 642 } 643 break; 644 case ADB_STATE_IDLE: 645 return 0; 646 } 647 648 assert(s->adb_data_out_index < sizeof(s->adb_data_out) - 1); 649 650 s->adb_data_out[s->adb_data_out_index++] = data; 651 qemu_irq_raise(s->adb_data_ready); 652 return 1; 653 } 654 655 static int adb_via_receive(MacVIAState *s, int state, uint8_t *data) 656 { 657 switch (state) { 658 case ADB_STATE_NEW: 659 return 0; 660 661 case ADB_STATE_EVEN: 662 if (s->adb_data_in_size <= 0) { 663 qemu_irq_raise(s->adb_data_ready); 664 return 0; 665 } 666 667 if (s->adb_data_in_index >= s->adb_data_in_size) { 668 *data = 0; 669 qemu_irq_raise(s->adb_data_ready); 670 return 1; 671 } 672 673 if ((s->adb_data_in_index & 1) == 0) { 674 return 0; 675 } 676 677 break; 678 679 case ADB_STATE_ODD: 680 if (s->adb_data_in_size <= 0) { 681 qemu_irq_raise(s->adb_data_ready); 682 return 0; 683 } 684 685 if (s->adb_data_in_index >= s->adb_data_in_size) { 686 *data = 0; 687 qemu_irq_raise(s->adb_data_ready); 688 return 1; 689 } 690 691 if (s->adb_data_in_index & 1) { 692 return 0; 693 } 694 695 break; 696 697 case ADB_STATE_IDLE: 698 if (s->adb_data_out_index == 0) { 699 return 0; 700 } 701 702 s->adb_data_in_size = adb_request(&s->adb_bus, s->adb_data_in, 703 s->adb_data_out, 704 s->adb_data_out_index); 705 s->adb_data_out_index = 0; 706 s->adb_data_in_index = 0; 707 if (s->adb_data_in_size < 0) { 708 *data = 0xff; 709 qemu_irq_raise(s->adb_data_ready); 710 return -1; 711 } 712 713 if (s->adb_data_in_size == 0) { 714 return 0; 715 } 716 717 break; 718 } 719 720 assert(s->adb_data_in_index < sizeof(s->adb_data_in) - 1); 721 722 *data = s->adb_data_in[s->adb_data_in_index++]; 723 qemu_irq_raise(s->adb_data_ready); 724 if (*data == 0xff || *data == 0) { 725 return 0; 726 } 727 return 1; 728 } 729 730 static void via1_adb_update(MacVIAState *m) 731 { 732 MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1); 733 MOS6522State *s = MOS6522(v1s); 734 int state; 735 int ret; 736 737 state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift; 738 739 if (s->acr & VIA1ACR_vShiftOut) { 740 /* output mode */ 741 ret = adb_via_send(m, state, s->sr); 742 if (ret > 0) { 743 s->b &= ~VIA1B_vADBInt; 744 } else { 745 s->b |= VIA1B_vADBInt; 746 } 747 } else { 748 /* input mode */ 749 ret = adb_via_receive(m, state, &s->sr); 750 if (ret > 0 && s->sr != 0xff) { 751 s->b &= ~VIA1B_vADBInt; 752 } else { 753 s->b |= VIA1B_vADBInt; 754 } 755 } 756 } 757 758 static void via_adb_poll(void *opaque) 759 { 760 MacVIAState *m = opaque; 761 MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1); 762 MOS6522State *s = MOS6522(v1s); 763 int state; 764 765 if (s->b & VIA1B_vADBInt) { 766 state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift; 767 if (adb_via_poll(m, state, &s->sr)) { 768 s->b &= ~VIA1B_vADBInt; 769 } 770 } 771 772 timer_mod(m->adb_poll_timer, 773 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 774 (NANOSECONDS_PER_SECOND / VIA_ADB_POLL_FREQ)); 775 } 776 777 static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned size) 778 { 779 MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque); 780 MOS6522State *ms = MOS6522(s); 781 int64_t now = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL); 782 783 /* 784 * If IRQs are disabled, timers are disabled, but we need to update 785 * VIA1_IRQ_VBLANK and VIA1_IRQ_ONE_SECOND bits in the IFR 786 */ 787 788 if (now >= s->next_VBL) { 789 ms->ifr |= VIA1_IRQ_VBLANK; 790 via1_VBL_update(s); 791 } 792 if (now >= s->next_second) { 793 ms->ifr |= VIA1_IRQ_ONE_SECOND; 794 via1_one_second_update(s); 795 } 796 797 addr = (addr >> 9) & 0xf; 798 return mos6522_read(ms, addr, size); 799 } 800 801 static void mos6522_q800_via1_write(void *opaque, hwaddr addr, uint64_t val, 802 unsigned size) 803 { 804 MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(opaque); 805 MOS6522State *ms = MOS6522(v1s); 806 807 addr = (addr >> 9) & 0xf; 808 mos6522_write(ms, addr, val, size); 809 810 via1_one_second_update(v1s); 811 via1_VBL_update(v1s); 812 } 813 814 static const MemoryRegionOps mos6522_q800_via1_ops = { 815 .read = mos6522_q800_via1_read, 816 .write = mos6522_q800_via1_write, 817 .endianness = DEVICE_BIG_ENDIAN, 818 .valid = { 819 .min_access_size = 1, 820 .max_access_size = 1, 821 }, 822 }; 823 824 static uint64_t mos6522_q800_via2_read(void *opaque, hwaddr addr, unsigned size) 825 { 826 MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque); 827 MOS6522State *ms = MOS6522(s); 828 829 addr = (addr >> 9) & 0xf; 830 return mos6522_read(ms, addr, size); 831 } 832 833 static void mos6522_q800_via2_write(void *opaque, hwaddr addr, uint64_t val, 834 unsigned size) 835 { 836 MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque); 837 MOS6522State *ms = MOS6522(s); 838 839 addr = (addr >> 9) & 0xf; 840 mos6522_write(ms, addr, val, size); 841 } 842 843 static const MemoryRegionOps mos6522_q800_via2_ops = { 844 .read = mos6522_q800_via2_read, 845 .write = mos6522_q800_via2_write, 846 .endianness = DEVICE_BIG_ENDIAN, 847 .valid = { 848 .min_access_size = 1, 849 .max_access_size = 1, 850 }, 851 }; 852 853 static void mac_via_reset(DeviceState *dev) 854 { 855 MacVIAState *m = MAC_VIA(dev); 856 MOS6522Q800VIA1State *v1s = &m->mos6522_via1; 857 858 timer_mod(m->adb_poll_timer, 859 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 860 (NANOSECONDS_PER_SECOND / VIA_ADB_POLL_FREQ)); 861 862 timer_del(v1s->VBL_timer); 863 v1s->next_VBL = 0; 864 timer_del(v1s->one_second_timer); 865 v1s->next_second = 0; 866 867 m->cmd = REG_EMPTY; 868 m->alt = REG_EMPTY; 869 } 870 871 static void mac_via_realize(DeviceState *dev, Error **errp) 872 { 873 MacVIAState *m = MAC_VIA(dev); 874 MOS6522State *ms; 875 struct tm tm; 876 int ret; 877 878 /* Init VIAs 1 and 2 */ 879 sysbus_init_child_obj(OBJECT(dev), "via1", &m->mos6522_via1, 880 sizeof(m->mos6522_via1), TYPE_MOS6522_Q800_VIA1); 881 882 sysbus_init_child_obj(OBJECT(dev), "via2", &m->mos6522_via2, 883 sizeof(m->mos6522_via2), TYPE_MOS6522_Q800_VIA2); 884 885 /* Pass through mos6522 output IRQs */ 886 ms = MOS6522(&m->mos6522_via1); 887 object_property_add_alias(OBJECT(dev), "irq[0]", OBJECT(ms), 888 SYSBUS_DEVICE_GPIO_IRQ "[0]", &error_abort); 889 ms = MOS6522(&m->mos6522_via2); 890 object_property_add_alias(OBJECT(dev), "irq[1]", OBJECT(ms), 891 SYSBUS_DEVICE_GPIO_IRQ "[0]", &error_abort); 892 893 /* Pass through mos6522 input IRQs */ 894 qdev_pass_gpios(DEVICE(&m->mos6522_via1), dev, "via1-irq"); 895 qdev_pass_gpios(DEVICE(&m->mos6522_via2), dev, "via2-irq"); 896 897 /* VIA 1 */ 898 m->mos6522_via1.one_second_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, 899 via1_one_second, 900 &m->mos6522_via1); 901 m->mos6522_via1.VBL_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, via1_VBL, 902 &m->mos6522_via1); 903 904 qemu_get_timedate(&tm, 0); 905 m->tick_offset = (uint32_t)mktimegm(&tm) + RTC_OFFSET; 906 907 m->adb_poll_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, via_adb_poll, m); 908 m->adb_data_ready = qdev_get_gpio_in_named(dev, "via1-irq", 909 VIA1_IRQ_ADB_READY_BIT); 910 911 if (m->blk) { 912 int64_t len = blk_getlength(m->blk); 913 if (len < 0) { 914 error_setg_errno(errp, -len, 915 "could not get length of backing image"); 916 return; 917 } 918 ret = blk_set_perm(m->blk, 919 BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE, 920 BLK_PERM_ALL, errp); 921 if (ret < 0) { 922 return; 923 } 924 925 len = blk_pread(m->blk, 0, m->mos6522_via1.PRAM, 926 sizeof(m->mos6522_via1.PRAM)); 927 if (len != sizeof(m->mos6522_via1.PRAM)) { 928 error_setg(errp, "can't read PRAM contents"); 929 return; 930 } 931 } 932 } 933 934 static void mac_via_init(Object *obj) 935 { 936 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 937 MacVIAState *m = MAC_VIA(obj); 938 939 /* MMIO */ 940 memory_region_init(&m->mmio, obj, "mac-via", 2 * VIA_SIZE); 941 sysbus_init_mmio(sbd, &m->mmio); 942 943 memory_region_init_io(&m->via1mem, obj, &mos6522_q800_via1_ops, 944 &m->mos6522_via1, "via1", VIA_SIZE); 945 memory_region_add_subregion(&m->mmio, 0x0, &m->via1mem); 946 947 memory_region_init_io(&m->via2mem, obj, &mos6522_q800_via2_ops, 948 &m->mos6522_via2, "via2", VIA_SIZE); 949 memory_region_add_subregion(&m->mmio, VIA_SIZE, &m->via2mem); 950 951 /* ADB */ 952 qbus_create_inplace((BusState *)&m->adb_bus, sizeof(m->adb_bus), 953 TYPE_ADB_BUS, DEVICE(obj), "adb.0"); 954 } 955 956 static void postload_update_cb(void *opaque, int running, RunState state) 957 { 958 MacVIAState *m = MAC_VIA(opaque); 959 960 qemu_del_vm_change_state_handler(m->vmstate); 961 m->vmstate = NULL; 962 963 pram_update(m); 964 } 965 966 static int mac_via_post_load(void *opaque, int version_id) 967 { 968 MacVIAState *m = MAC_VIA(opaque); 969 970 if (m->blk) { 971 m->vmstate = qemu_add_vm_change_state_handler(postload_update_cb, 972 m); 973 } 974 975 return 0; 976 } 977 978 static const VMStateDescription vmstate_mac_via = { 979 .name = "mac-via", 980 .version_id = 1, 981 .minimum_version_id = 1, 982 .post_load = mac_via_post_load, 983 .fields = (VMStateField[]) { 984 /* VIAs */ 985 VMSTATE_STRUCT(mos6522_via1.parent_obj, MacVIAState, 0, vmstate_mos6522, 986 MOS6522State), 987 VMSTATE_UINT8(mos6522_via1.last_b, MacVIAState), 988 VMSTATE_BUFFER(mos6522_via1.PRAM, MacVIAState), 989 VMSTATE_TIMER_PTR(mos6522_via1.one_second_timer, MacVIAState), 990 VMSTATE_INT64(mos6522_via1.next_second, MacVIAState), 991 VMSTATE_TIMER_PTR(mos6522_via1.VBL_timer, MacVIAState), 992 VMSTATE_INT64(mos6522_via1.next_VBL, MacVIAState), 993 VMSTATE_STRUCT(mos6522_via2.parent_obj, MacVIAState, 0, vmstate_mos6522, 994 MOS6522State), 995 /* RTC */ 996 VMSTATE_UINT32(tick_offset, MacVIAState), 997 VMSTATE_UINT8(data_out, MacVIAState), 998 VMSTATE_INT32(data_out_cnt, MacVIAState), 999 VMSTATE_UINT8(data_in, MacVIAState), 1000 VMSTATE_UINT8(data_in_cnt, MacVIAState), 1001 VMSTATE_UINT8(cmd, MacVIAState), 1002 VMSTATE_INT32(wprotect, MacVIAState), 1003 VMSTATE_INT32(alt, MacVIAState), 1004 /* ADB */ 1005 VMSTATE_TIMER_PTR(adb_poll_timer, MacVIAState), 1006 VMSTATE_INT32(adb_data_in_size, MacVIAState), 1007 VMSTATE_INT32(adb_data_in_index, MacVIAState), 1008 VMSTATE_INT32(adb_data_out_index, MacVIAState), 1009 VMSTATE_BUFFER(adb_data_in, MacVIAState), 1010 VMSTATE_BUFFER(adb_data_out, MacVIAState), 1011 VMSTATE_END_OF_LIST() 1012 } 1013 }; 1014 1015 static Property mac_via_properties[] = { 1016 DEFINE_PROP_DRIVE("drive", MacVIAState, blk), 1017 DEFINE_PROP_END_OF_LIST(), 1018 }; 1019 1020 static void mac_via_class_init(ObjectClass *oc, void *data) 1021 { 1022 DeviceClass *dc = DEVICE_CLASS(oc); 1023 1024 dc->realize = mac_via_realize; 1025 dc->reset = mac_via_reset; 1026 dc->vmsd = &vmstate_mac_via; 1027 device_class_set_props(dc, mac_via_properties); 1028 } 1029 1030 static TypeInfo mac_via_info = { 1031 .name = TYPE_MAC_VIA, 1032 .parent = TYPE_SYS_BUS_DEVICE, 1033 .instance_size = sizeof(MacVIAState), 1034 .instance_init = mac_via_init, 1035 .class_init = mac_via_class_init, 1036 }; 1037 1038 /* VIA 1 */ 1039 static void mos6522_q800_via1_portB_write(MOS6522State *s) 1040 { 1041 MOS6522Q800VIA1State *v1s = container_of(s, MOS6522Q800VIA1State, 1042 parent_obj); 1043 MacVIAState *m = container_of(v1s, MacVIAState, mos6522_via1); 1044 1045 via1_rtc_update(m); 1046 via1_adb_update(m); 1047 1048 v1s->last_b = s->b; 1049 } 1050 1051 static void mos6522_q800_via1_reset(DeviceState *dev) 1052 { 1053 MOS6522State *ms = MOS6522(dev); 1054 MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms); 1055 1056 mdc->parent_reset(dev); 1057 1058 ms->timers[0].frequency = VIA_TIMER_FREQ; 1059 ms->timers[1].frequency = VIA_TIMER_FREQ; 1060 1061 ms->b = VIA1B_vADB_StateMask | VIA1B_vADBInt | VIA1B_vRTCEnb; 1062 } 1063 1064 static void mos6522_q800_via1_init(Object *obj) 1065 { 1066 qdev_init_gpio_in_named(DEVICE(obj), via1_irq_request, "via1-irq", 1067 VIA1_IRQ_NB); 1068 } 1069 1070 static void mos6522_q800_via1_class_init(ObjectClass *oc, void *data) 1071 { 1072 DeviceClass *dc = DEVICE_CLASS(oc); 1073 MOS6522DeviceClass *mdc = MOS6522_DEVICE_CLASS(oc); 1074 1075 dc->reset = mos6522_q800_via1_reset; 1076 mdc->portB_write = mos6522_q800_via1_portB_write; 1077 } 1078 1079 static const TypeInfo mos6522_q800_via1_type_info = { 1080 .name = TYPE_MOS6522_Q800_VIA1, 1081 .parent = TYPE_MOS6522, 1082 .instance_size = sizeof(MOS6522Q800VIA1State), 1083 .instance_init = mos6522_q800_via1_init, 1084 .class_init = mos6522_q800_via1_class_init, 1085 }; 1086 1087 /* VIA 2 */ 1088 static void mos6522_q800_via2_portB_write(MOS6522State *s) 1089 { 1090 if (s->dirb & VIA2B_vPower && (s->b & VIA2B_vPower) == 0) { 1091 /* shutdown */ 1092 qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); 1093 } 1094 } 1095 1096 static void mos6522_q800_via2_reset(DeviceState *dev) 1097 { 1098 MOS6522State *ms = MOS6522(dev); 1099 MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms); 1100 1101 mdc->parent_reset(dev); 1102 1103 ms->timers[0].frequency = VIA_TIMER_FREQ; 1104 ms->timers[1].frequency = VIA_TIMER_FREQ; 1105 1106 ms->dirb = 0; 1107 ms->b = 0; 1108 } 1109 1110 static void mos6522_q800_via2_init(Object *obj) 1111 { 1112 qdev_init_gpio_in_named(DEVICE(obj), via2_irq_request, "via2-irq", 1113 VIA2_IRQ_NB); 1114 } 1115 1116 static void mos6522_q800_via2_class_init(ObjectClass *oc, void *data) 1117 { 1118 DeviceClass *dc = DEVICE_CLASS(oc); 1119 MOS6522DeviceClass *mdc = MOS6522_DEVICE_CLASS(oc); 1120 1121 dc->reset = mos6522_q800_via2_reset; 1122 mdc->portB_write = mos6522_q800_via2_portB_write; 1123 } 1124 1125 static const TypeInfo mos6522_q800_via2_type_info = { 1126 .name = TYPE_MOS6522_Q800_VIA2, 1127 .parent = TYPE_MOS6522, 1128 .instance_size = sizeof(MOS6522Q800VIA2State), 1129 .instance_init = mos6522_q800_via2_init, 1130 .class_init = mos6522_q800_via2_class_init, 1131 }; 1132 1133 static void mac_via_register_types(void) 1134 { 1135 type_register_static(&mos6522_q800_via1_type_info); 1136 type_register_static(&mos6522_q800_via2_type_info); 1137 type_register_static(&mac_via_info); 1138 } 1139 1140 type_init(mac_via_register_types); 1141