1 /*
2 * ARM IoTKit system information block
3 *
4 * Copyright (c) 2018 Linaro Limited
5 * Written by Peter Maydell
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 or
9 * (at your option) any later version.
10 */
11
12 /*
13 * This is a model of the "system information block" which is part of the
14 * Arm IoTKit and documented in
15 * https://developer.arm.com/documentation/ecm0601256/latest
16 * It consists of 2 read-only version/config registers, plus the
17 * usual ID registers.
18 */
19
20 #include "qemu/osdep.h"
21 #include "qemu/log.h"
22 #include "qemu/module.h"
23 #include "trace.h"
24 #include "qapi/error.h"
25 #include "hw/sysbus.h"
26 #include "hw/registerfields.h"
27 #include "hw/misc/iotkit-sysinfo.h"
28 #include "hw/qdev-properties.h"
29 #include "hw/arm/armsse-version.h"
30
31 REG32(SYS_VERSION, 0x0)
32 REG32(SYS_CONFIG, 0x4)
33 REG32(SYS_CONFIG1, 0x8)
34 REG32(IIDR, 0xfc8)
35 REG32(PID4, 0xfd0)
36 REG32(PID5, 0xfd4)
37 REG32(PID6, 0xfd8)
38 REG32(PID7, 0xfdc)
39 REG32(PID0, 0xfe0)
40 REG32(PID1, 0xfe4)
41 REG32(PID2, 0xfe8)
42 REG32(PID3, 0xfec)
43 REG32(CID0, 0xff0)
44 REG32(CID1, 0xff4)
45 REG32(CID2, 0xff8)
46 REG32(CID3, 0xffc)
47
48 /* PID/CID values */
49 static const int sysinfo_id[] = {
50 0x04, 0x00, 0x00, 0x00, /* PID4..PID7 */
51 0x58, 0xb8, 0x0b, 0x00, /* PID0..PID3 */
52 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */
53 };
54
55 static const int sysinfo_sse300_id[] = {
56 0x04, 0x00, 0x00, 0x00, /* PID4..PID7 */
57 0x58, 0xb8, 0x1b, 0x00, /* PID0..PID3 */
58 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */
59 };
60
iotkit_sysinfo_read(void * opaque,hwaddr offset,unsigned size)61 static uint64_t iotkit_sysinfo_read(void *opaque, hwaddr offset,
62 unsigned size)
63 {
64 IoTKitSysInfo *s = IOTKIT_SYSINFO(opaque);
65 uint64_t r;
66
67 switch (offset) {
68 case A_SYS_VERSION:
69 r = s->sys_version;
70 break;
71
72 case A_SYS_CONFIG:
73 r = s->sys_config;
74 break;
75 case A_SYS_CONFIG1:
76 switch (s->sse_version) {
77 case ARMSSE_SSE300:
78 return 0;
79 break;
80 default:
81 goto bad_read;
82 }
83 break;
84 case A_IIDR:
85 switch (s->sse_version) {
86 case ARMSSE_SSE300:
87 return s->iidr;
88 break;
89 default:
90 goto bad_read;
91 }
92 break;
93 case A_PID4 ... A_CID3:
94 switch (s->sse_version) {
95 case ARMSSE_SSE300:
96 r = sysinfo_sse300_id[(offset - A_PID4) / 4];
97 break;
98 default:
99 r = sysinfo_id[(offset - A_PID4) / 4];
100 break;
101 }
102 break;
103 default:
104 bad_read:
105 qemu_log_mask(LOG_GUEST_ERROR,
106 "IoTKit SysInfo read: bad offset %x\n", (int)offset);
107 r = 0;
108 break;
109 }
110 trace_iotkit_sysinfo_read(offset, r, size);
111 return r;
112 }
113
iotkit_sysinfo_write(void * opaque,hwaddr offset,uint64_t value,unsigned size)114 static void iotkit_sysinfo_write(void *opaque, hwaddr offset,
115 uint64_t value, unsigned size)
116 {
117 trace_iotkit_sysinfo_write(offset, value, size);
118
119 qemu_log_mask(LOG_GUEST_ERROR,
120 "IoTKit SysInfo: write to RO offset 0x%x\n", (int)offset);
121 }
122
123 static const MemoryRegionOps iotkit_sysinfo_ops = {
124 .read = iotkit_sysinfo_read,
125 .write = iotkit_sysinfo_write,
126 .endianness = DEVICE_LITTLE_ENDIAN,
127 /* byte/halfword accesses are just zero-padded on reads and writes */
128 .impl.min_access_size = 4,
129 .impl.max_access_size = 4,
130 .valid.min_access_size = 1,
131 .valid.max_access_size = 4,
132 };
133
134 static Property iotkit_sysinfo_props[] = {
135 DEFINE_PROP_UINT32("SYS_VERSION", IoTKitSysInfo, sys_version, 0),
136 DEFINE_PROP_UINT32("SYS_CONFIG", IoTKitSysInfo, sys_config, 0),
137 DEFINE_PROP_UINT32("sse-version", IoTKitSysInfo, sse_version, 0),
138 DEFINE_PROP_UINT32("IIDR", IoTKitSysInfo, iidr, 0),
139 DEFINE_PROP_END_OF_LIST()
140 };
141
iotkit_sysinfo_init(Object * obj)142 static void iotkit_sysinfo_init(Object *obj)
143 {
144 SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
145 IoTKitSysInfo *s = IOTKIT_SYSINFO(obj);
146
147 memory_region_init_io(&s->iomem, obj, &iotkit_sysinfo_ops,
148 s, "iotkit-sysinfo", 0x1000);
149 sysbus_init_mmio(sbd, &s->iomem);
150 }
151
iotkit_sysinfo_realize(DeviceState * dev,Error ** errp)152 static void iotkit_sysinfo_realize(DeviceState *dev, Error **errp)
153 {
154 IoTKitSysInfo *s = IOTKIT_SYSINFO(dev);
155
156 if (!armsse_version_valid(s->sse_version)) {
157 error_setg(errp, "invalid sse-version value %d", s->sse_version);
158 return;
159 }
160 }
161
iotkit_sysinfo_class_init(ObjectClass * klass,void * data)162 static void iotkit_sysinfo_class_init(ObjectClass *klass, void *data)
163 {
164 DeviceClass *dc = DEVICE_CLASS(klass);
165
166 /*
167 * This device has no guest-modifiable state and so it
168 * does not need a reset function or VMState.
169 */
170 dc->realize = iotkit_sysinfo_realize;
171 device_class_set_props(dc, iotkit_sysinfo_props);
172 }
173
174 static const TypeInfo iotkit_sysinfo_info = {
175 .name = TYPE_IOTKIT_SYSINFO,
176 .parent = TYPE_SYS_BUS_DEVICE,
177 .instance_size = sizeof(IoTKitSysInfo),
178 .instance_init = iotkit_sysinfo_init,
179 .class_init = iotkit_sysinfo_class_init,
180 };
181
iotkit_sysinfo_register_types(void)182 static void iotkit_sysinfo_register_types(void)
183 {
184 type_register_static(&iotkit_sysinfo_info);
185 }
186
187 type_init(iotkit_sysinfo_register_types);
188