1 /* 2 * ARM IoTKit system control element 3 * 4 * Copyright (c) 2018 Linaro Limited 5 * Written by Peter Maydell 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 or 9 * (at your option) any later version. 10 */ 11 12 /* 13 * This is a model of the "system control element" which is part of the 14 * Arm IoTKit and documented in 15 * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html 16 * Specifically, it implements the "system control register" blocks. 17 */ 18 19 #include "qemu/osdep.h" 20 #include "qemu/bitops.h" 21 #include "qemu/log.h" 22 #include "qemu/module.h" 23 #include "sysemu/runstate.h" 24 #include "trace.h" 25 #include "qapi/error.h" 26 #include "hw/sysbus.h" 27 #include "migration/vmstate.h" 28 #include "hw/registerfields.h" 29 #include "hw/misc/iotkit-sysctl.h" 30 #include "hw/qdev-properties.h" 31 #include "target/arm/arm-powerctl.h" 32 #include "target/arm/cpu.h" 33 34 REG32(SECDBGSTAT, 0x0) 35 REG32(SECDBGSET, 0x4) 36 REG32(SECDBGCLR, 0x8) 37 REG32(SCSECCTRL, 0xc) 38 REG32(FCLK_DIV, 0x10) 39 REG32(SYSCLK_DIV, 0x14) 40 REG32(CLOCK_FORCE, 0x18) 41 REG32(RESET_SYNDROME, 0x100) 42 REG32(RESET_MASK, 0x104) 43 REG32(SWRESET, 0x108) 44 FIELD(SWRESET, SWRESETREQ, 9, 1) 45 REG32(GRETREG, 0x10c) 46 REG32(INITSVTOR0, 0x110) 47 REG32(INITSVTOR1, 0x114) 48 REG32(CPUWAIT, 0x118) 49 REG32(NMI_ENABLE, 0x11c) /* BUSWAIT in IoTKit */ 50 REG32(WICCTRL, 0x120) 51 REG32(EWCTRL, 0x124) 52 REG32(PDCM_PD_SYS_SENSE, 0x200) 53 REG32(PDCM_PD_SRAM0_SENSE, 0x20c) 54 REG32(PDCM_PD_SRAM1_SENSE, 0x210) 55 REG32(PDCM_PD_SRAM2_SENSE, 0x214) 56 REG32(PDCM_PD_SRAM3_SENSE, 0x218) 57 REG32(PID4, 0xfd0) 58 REG32(PID5, 0xfd4) 59 REG32(PID6, 0xfd8) 60 REG32(PID7, 0xfdc) 61 REG32(PID0, 0xfe0) 62 REG32(PID1, 0xfe4) 63 REG32(PID2, 0xfe8) 64 REG32(PID3, 0xfec) 65 REG32(CID0, 0xff0) 66 REG32(CID1, 0xff4) 67 REG32(CID2, 0xff8) 68 REG32(CID3, 0xffc) 69 70 /* PID/CID values */ 71 static const int sysctl_id[] = { 72 0x04, 0x00, 0x00, 0x00, /* PID4..PID7 */ 73 0x54, 0xb8, 0x0b, 0x00, /* PID0..PID3 */ 74 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ 75 }; 76 77 /* 78 * Set the initial secure vector table offset address for the core. 79 * This will take effect when the CPU next resets. 80 */ 81 static void set_init_vtor(uint64_t cpuid, uint32_t vtor) 82 { 83 Object *cpuobj = OBJECT(arm_get_cpu_by_id(cpuid)); 84 85 if (cpuobj) { 86 if (object_property_find(cpuobj, "init-svtor", NULL)) { 87 object_property_set_uint(cpuobj, vtor, "init-svtor", &error_abort); 88 } 89 } 90 } 91 92 static uint64_t iotkit_sysctl_read(void *opaque, hwaddr offset, 93 unsigned size) 94 { 95 IoTKitSysCtl *s = IOTKIT_SYSCTL(opaque); 96 uint64_t r; 97 98 switch (offset) { 99 case A_SECDBGSTAT: 100 r = s->secure_debug; 101 break; 102 case A_SCSECCTRL: 103 if (!s->is_sse200) { 104 goto bad_offset; 105 } 106 r = s->scsecctrl; 107 break; 108 case A_FCLK_DIV: 109 if (!s->is_sse200) { 110 goto bad_offset; 111 } 112 r = s->fclk_div; 113 break; 114 case A_SYSCLK_DIV: 115 if (!s->is_sse200) { 116 goto bad_offset; 117 } 118 r = s->sysclk_div; 119 break; 120 case A_CLOCK_FORCE: 121 if (!s->is_sse200) { 122 goto bad_offset; 123 } 124 r = s->clock_force; 125 break; 126 case A_RESET_SYNDROME: 127 r = s->reset_syndrome; 128 break; 129 case A_RESET_MASK: 130 r = s->reset_mask; 131 break; 132 case A_GRETREG: 133 r = s->gretreg; 134 break; 135 case A_INITSVTOR0: 136 r = s->initsvtor0; 137 break; 138 case A_INITSVTOR1: 139 if (!s->is_sse200) { 140 goto bad_offset; 141 } 142 r = s->initsvtor1; 143 break; 144 case A_CPUWAIT: 145 r = s->cpuwait; 146 break; 147 case A_NMI_ENABLE: 148 /* In IoTKit this is named BUSWAIT but is marked reserved, R/O, zero */ 149 if (!s->is_sse200) { 150 r = 0; 151 break; 152 } 153 r = s->nmi_enable; 154 break; 155 case A_WICCTRL: 156 r = s->wicctrl; 157 break; 158 case A_EWCTRL: 159 if (!s->is_sse200) { 160 goto bad_offset; 161 } 162 r = s->ewctrl; 163 break; 164 case A_PDCM_PD_SYS_SENSE: 165 if (!s->is_sse200) { 166 goto bad_offset; 167 } 168 r = s->pdcm_pd_sys_sense; 169 break; 170 case A_PDCM_PD_SRAM0_SENSE: 171 if (!s->is_sse200) { 172 goto bad_offset; 173 } 174 r = s->pdcm_pd_sram0_sense; 175 break; 176 case A_PDCM_PD_SRAM1_SENSE: 177 if (!s->is_sse200) { 178 goto bad_offset; 179 } 180 r = s->pdcm_pd_sram1_sense; 181 break; 182 case A_PDCM_PD_SRAM2_SENSE: 183 if (!s->is_sse200) { 184 goto bad_offset; 185 } 186 r = s->pdcm_pd_sram2_sense; 187 break; 188 case A_PDCM_PD_SRAM3_SENSE: 189 if (!s->is_sse200) { 190 goto bad_offset; 191 } 192 r = s->pdcm_pd_sram3_sense; 193 break; 194 case A_PID4 ... A_CID3: 195 r = sysctl_id[(offset - A_PID4) / 4]; 196 break; 197 case A_SECDBGSET: 198 case A_SECDBGCLR: 199 case A_SWRESET: 200 qemu_log_mask(LOG_GUEST_ERROR, 201 "IoTKit SysCtl read: read of WO offset %x\n", 202 (int)offset); 203 r = 0; 204 break; 205 default: 206 bad_offset: 207 qemu_log_mask(LOG_GUEST_ERROR, 208 "IoTKit SysCtl read: bad offset %x\n", (int)offset); 209 r = 0; 210 break; 211 } 212 trace_iotkit_sysctl_read(offset, r, size); 213 return r; 214 } 215 216 static void iotkit_sysctl_write(void *opaque, hwaddr offset, 217 uint64_t value, unsigned size) 218 { 219 IoTKitSysCtl *s = IOTKIT_SYSCTL(opaque); 220 221 trace_iotkit_sysctl_write(offset, value, size); 222 223 /* 224 * Most of the state here has to do with control of reset and 225 * similar kinds of power up -- for instance the guest can ask 226 * what the reason for the last reset was, or forbid reset for 227 * some causes (like the non-secure watchdog). Most of this is 228 * not relevant to QEMU, which doesn't really model anything other 229 * than a full power-on reset. 230 * We just model the registers as reads-as-written. 231 */ 232 233 switch (offset) { 234 case A_RESET_SYNDROME: 235 qemu_log_mask(LOG_UNIMP, 236 "IoTKit SysCtl RESET_SYNDROME unimplemented\n"); 237 s->reset_syndrome = value; 238 break; 239 case A_RESET_MASK: 240 qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl RESET_MASK unimplemented\n"); 241 s->reset_mask = value; 242 break; 243 case A_GRETREG: 244 /* 245 * General retention register, which is only reset by a power-on 246 * reset. Technically this implementation is complete, since 247 * QEMU only supports power-on resets... 248 */ 249 s->gretreg = value; 250 break; 251 case A_INITSVTOR0: 252 s->initsvtor0 = value; 253 set_init_vtor(0, s->initsvtor0); 254 break; 255 case A_CPUWAIT: 256 if ((s->cpuwait & 1) && !(value & 1)) { 257 /* Powering up CPU 0 */ 258 arm_set_cpu_on_and_reset(0); 259 } 260 if ((s->cpuwait & 2) && !(value & 2)) { 261 /* Powering up CPU 1 */ 262 arm_set_cpu_on_and_reset(1); 263 } 264 s->cpuwait = value; 265 break; 266 case A_WICCTRL: 267 qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl WICCTRL unimplemented\n"); 268 s->wicctrl = value; 269 break; 270 case A_SECDBGSET: 271 /* write-1-to-set */ 272 qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl SECDBGSET unimplemented\n"); 273 s->secure_debug |= value; 274 break; 275 case A_SECDBGCLR: 276 /* write-1-to-clear */ 277 s->secure_debug &= ~value; 278 break; 279 case A_SWRESET: 280 /* One w/o bit to request a reset; all other bits reserved */ 281 if (value & R_SWRESET_SWRESETREQ_MASK) { 282 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 283 } 284 break; 285 case A_SCSECCTRL: 286 if (!s->is_sse200) { 287 goto bad_offset; 288 } 289 qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl SCSECCTRL unimplemented\n"); 290 s->scsecctrl = value; 291 break; 292 case A_FCLK_DIV: 293 if (!s->is_sse200) { 294 goto bad_offset; 295 } 296 qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl FCLK_DIV unimplemented\n"); 297 s->fclk_div = value; 298 break; 299 case A_SYSCLK_DIV: 300 if (!s->is_sse200) { 301 goto bad_offset; 302 } 303 qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl SYSCLK_DIV unimplemented\n"); 304 s->sysclk_div = value; 305 break; 306 case A_CLOCK_FORCE: 307 if (!s->is_sse200) { 308 goto bad_offset; 309 } 310 qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl CLOCK_FORCE unimplemented\n"); 311 s->clock_force = value; 312 break; 313 case A_INITSVTOR1: 314 if (!s->is_sse200) { 315 goto bad_offset; 316 } 317 s->initsvtor1 = value; 318 set_init_vtor(1, s->initsvtor1); 319 break; 320 case A_EWCTRL: 321 if (!s->is_sse200) { 322 goto bad_offset; 323 } 324 qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl EWCTRL unimplemented\n"); 325 s->ewctrl = value; 326 break; 327 case A_PDCM_PD_SYS_SENSE: 328 if (!s->is_sse200) { 329 goto bad_offset; 330 } 331 qemu_log_mask(LOG_UNIMP, 332 "IoTKit SysCtl PDCM_PD_SYS_SENSE unimplemented\n"); 333 s->pdcm_pd_sys_sense = value; 334 break; 335 case A_PDCM_PD_SRAM0_SENSE: 336 if (!s->is_sse200) { 337 goto bad_offset; 338 } 339 qemu_log_mask(LOG_UNIMP, 340 "IoTKit SysCtl PDCM_PD_SRAM0_SENSE unimplemented\n"); 341 s->pdcm_pd_sram0_sense = value; 342 break; 343 case A_PDCM_PD_SRAM1_SENSE: 344 if (!s->is_sse200) { 345 goto bad_offset; 346 } 347 qemu_log_mask(LOG_UNIMP, 348 "IoTKit SysCtl PDCM_PD_SRAM1_SENSE unimplemented\n"); 349 s->pdcm_pd_sram1_sense = value; 350 break; 351 case A_PDCM_PD_SRAM2_SENSE: 352 if (!s->is_sse200) { 353 goto bad_offset; 354 } 355 qemu_log_mask(LOG_UNIMP, 356 "IoTKit SysCtl PDCM_PD_SRAM2_SENSE unimplemented\n"); 357 s->pdcm_pd_sram2_sense = value; 358 break; 359 case A_PDCM_PD_SRAM3_SENSE: 360 if (!s->is_sse200) { 361 goto bad_offset; 362 } 363 qemu_log_mask(LOG_UNIMP, 364 "IoTKit SysCtl PDCM_PD_SRAM3_SENSE unimplemented\n"); 365 s->pdcm_pd_sram3_sense = value; 366 break; 367 case A_NMI_ENABLE: 368 /* In IoTKit this is BUSWAIT: reserved, R/O, zero */ 369 if (!s->is_sse200) { 370 goto ro_offset; 371 } 372 qemu_log_mask(LOG_UNIMP, "IoTKit SysCtl NMI_ENABLE unimplemented\n"); 373 s->nmi_enable = value; 374 break; 375 case A_SECDBGSTAT: 376 case A_PID4 ... A_CID3: 377 ro_offset: 378 qemu_log_mask(LOG_GUEST_ERROR, 379 "IoTKit SysCtl write: write of RO offset %x\n", 380 (int)offset); 381 break; 382 default: 383 bad_offset: 384 qemu_log_mask(LOG_GUEST_ERROR, 385 "IoTKit SysCtl write: bad offset %x\n", (int)offset); 386 break; 387 } 388 } 389 390 static const MemoryRegionOps iotkit_sysctl_ops = { 391 .read = iotkit_sysctl_read, 392 .write = iotkit_sysctl_write, 393 .endianness = DEVICE_LITTLE_ENDIAN, 394 /* byte/halfword accesses are just zero-padded on reads and writes */ 395 .impl.min_access_size = 4, 396 .impl.max_access_size = 4, 397 .valid.min_access_size = 1, 398 .valid.max_access_size = 4, 399 }; 400 401 static void iotkit_sysctl_reset(DeviceState *dev) 402 { 403 IoTKitSysCtl *s = IOTKIT_SYSCTL(dev); 404 405 trace_iotkit_sysctl_reset(); 406 s->secure_debug = 0; 407 s->reset_syndrome = 1; 408 s->reset_mask = 0; 409 s->gretreg = 0; 410 s->initsvtor0 = s->initsvtor0_rst; 411 s->initsvtor1 = s->initsvtor1_rst; 412 s->cpuwait = s->cpuwait_rst; 413 s->wicctrl = 0; 414 s->scsecctrl = 0; 415 s->fclk_div = 0; 416 s->sysclk_div = 0; 417 s->clock_force = 0; 418 s->nmi_enable = 0; 419 s->ewctrl = 0; 420 s->pdcm_pd_sys_sense = 0x7f; 421 s->pdcm_pd_sram0_sense = 0; 422 s->pdcm_pd_sram1_sense = 0; 423 s->pdcm_pd_sram2_sense = 0; 424 s->pdcm_pd_sram3_sense = 0; 425 } 426 427 static void iotkit_sysctl_init(Object *obj) 428 { 429 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 430 IoTKitSysCtl *s = IOTKIT_SYSCTL(obj); 431 432 memory_region_init_io(&s->iomem, obj, &iotkit_sysctl_ops, 433 s, "iotkit-sysctl", 0x1000); 434 sysbus_init_mmio(sbd, &s->iomem); 435 } 436 437 static void iotkit_sysctl_realize(DeviceState *dev, Error **errp) 438 { 439 IoTKitSysCtl *s = IOTKIT_SYSCTL(dev); 440 441 /* The top 4 bits of the SYS_VERSION register tell us if we're an SSE-200 */ 442 if (extract32(s->sys_version, 28, 4) == 2) { 443 s->is_sse200 = true; 444 } 445 } 446 447 static bool sse200_needed(void *opaque) 448 { 449 IoTKitSysCtl *s = IOTKIT_SYSCTL(opaque); 450 451 return s->is_sse200; 452 } 453 454 static const VMStateDescription iotkit_sysctl_sse200_vmstate = { 455 .name = "iotkit-sysctl/sse-200", 456 .version_id = 1, 457 .minimum_version_id = 1, 458 .needed = sse200_needed, 459 .fields = (VMStateField[]) { 460 VMSTATE_UINT32(scsecctrl, IoTKitSysCtl), 461 VMSTATE_UINT32(fclk_div, IoTKitSysCtl), 462 VMSTATE_UINT32(sysclk_div, IoTKitSysCtl), 463 VMSTATE_UINT32(clock_force, IoTKitSysCtl), 464 VMSTATE_UINT32(initsvtor1, IoTKitSysCtl), 465 VMSTATE_UINT32(nmi_enable, IoTKitSysCtl), 466 VMSTATE_UINT32(pdcm_pd_sys_sense, IoTKitSysCtl), 467 VMSTATE_UINT32(pdcm_pd_sram0_sense, IoTKitSysCtl), 468 VMSTATE_UINT32(pdcm_pd_sram1_sense, IoTKitSysCtl), 469 VMSTATE_UINT32(pdcm_pd_sram2_sense, IoTKitSysCtl), 470 VMSTATE_UINT32(pdcm_pd_sram3_sense, IoTKitSysCtl), 471 VMSTATE_END_OF_LIST() 472 } 473 }; 474 475 static const VMStateDescription iotkit_sysctl_vmstate = { 476 .name = "iotkit-sysctl", 477 .version_id = 1, 478 .minimum_version_id = 1, 479 .fields = (VMStateField[]) { 480 VMSTATE_UINT32(secure_debug, IoTKitSysCtl), 481 VMSTATE_UINT32(reset_syndrome, IoTKitSysCtl), 482 VMSTATE_UINT32(reset_mask, IoTKitSysCtl), 483 VMSTATE_UINT32(gretreg, IoTKitSysCtl), 484 VMSTATE_UINT32(initsvtor0, IoTKitSysCtl), 485 VMSTATE_UINT32(cpuwait, IoTKitSysCtl), 486 VMSTATE_UINT32(wicctrl, IoTKitSysCtl), 487 VMSTATE_END_OF_LIST() 488 }, 489 .subsections = (const VMStateDescription*[]) { 490 &iotkit_sysctl_sse200_vmstate, 491 NULL 492 } 493 }; 494 495 static Property iotkit_sysctl_props[] = { 496 DEFINE_PROP_UINT32("SYS_VERSION", IoTKitSysCtl, sys_version, 0), 497 DEFINE_PROP_UINT32("CPUWAIT_RST", IoTKitSysCtl, cpuwait_rst, 0), 498 DEFINE_PROP_UINT32("INITSVTOR0_RST", IoTKitSysCtl, initsvtor0_rst, 499 0x10000000), 500 DEFINE_PROP_UINT32("INITSVTOR1_RST", IoTKitSysCtl, initsvtor1_rst, 501 0x10000000), 502 DEFINE_PROP_END_OF_LIST() 503 }; 504 505 static void iotkit_sysctl_class_init(ObjectClass *klass, void *data) 506 { 507 DeviceClass *dc = DEVICE_CLASS(klass); 508 509 dc->vmsd = &iotkit_sysctl_vmstate; 510 dc->reset = iotkit_sysctl_reset; 511 device_class_set_props(dc, iotkit_sysctl_props); 512 dc->realize = iotkit_sysctl_realize; 513 } 514 515 static const TypeInfo iotkit_sysctl_info = { 516 .name = TYPE_IOTKIT_SYSCTL, 517 .parent = TYPE_SYS_BUS_DEVICE, 518 .instance_size = sizeof(IoTKitSysCtl), 519 .instance_init = iotkit_sysctl_init, 520 .class_init = iotkit_sysctl_class_init, 521 }; 522 523 static void iotkit_sysctl_register_types(void) 524 { 525 type_register_static(&iotkit_sysctl_info); 526 } 527 528 type_init(iotkit_sysctl_register_types); 529