1 /* 2 * Exynos4210 Power Management Unit (PMU) Emulation 3 * 4 * Copyright (C) 2011 Samsung Electronics Co Ltd. 5 * Maksim Kozlov <m.kozlov@samsung.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the 9 * Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 15 * for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 /* 22 * This model implements PMU registers just as a bulk of memory. Currently, 23 * the only reason this device exists is that secondary CPU boot loader 24 * uses PMU INFORM5 register as a holding pen. 25 */ 26 27 #include "qemu/osdep.h" 28 #include "hw/sysbus.h" 29 #include "migration/vmstate.h" 30 #include "qemu/module.h" 31 #include "sysemu/runstate.h" 32 #include "qom/object.h" 33 34 #ifndef DEBUG_PMU 35 #define DEBUG_PMU 0 36 #endif 37 38 #ifndef DEBUG_PMU_EXTEND 39 #define DEBUG_PMU_EXTEND 0 40 #endif 41 42 #if DEBUG_PMU 43 #define PRINT_DEBUG(fmt, args...) \ 44 do { \ 45 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 46 } while (0) 47 48 #if DEBUG_PMU_EXTEND 49 #define PRINT_DEBUG_EXTEND(fmt, args...) \ 50 do { \ 51 fprintf(stderr, " [%s:%d] "fmt, __func__, __LINE__, ##args); \ 52 } while (0) 53 #else 54 #define PRINT_DEBUG_EXTEND(fmt, args...) do {} while (0) 55 #endif /* EXTEND */ 56 57 #else 58 #define PRINT_DEBUG(fmt, args...) do {} while (0) 59 #define PRINT_DEBUG_EXTEND(fmt, args...) do {} while (0) 60 #endif 61 62 /* 63 * Offsets for PMU registers 64 */ 65 #define OM_STAT 0x0000 /* OM status register */ 66 #define RTC_CLKO_SEL 0x000C /* Controls RTCCLKOUT */ 67 #define GNSS_RTC_OUT_CTRL 0x0010 /* Controls GNSS_RTC_OUT */ 68 /* Decides whether system-level low-power mode is used. */ 69 #define SYSTEM_POWER_DOWN_CTRL 0x0200 70 /* Sets control options for CENTRAL_SEQ */ 71 #define SYSTEM_POWER_DOWN_OPTION 0x0208 72 #define SWRESET 0x0400 /* Generate software reset */ 73 #define RST_STAT 0x0404 /* Reset status register */ 74 #define WAKEUP_STAT 0x0600 /* Wakeup status register */ 75 #define EINT_WAKEUP_MASK 0x0604 /* Configure External INTerrupt mask */ 76 #define WAKEUP_MASK 0x0608 /* Configure wakeup source mask */ 77 #define HDMI_PHY_CONTROL 0x0700 /* HDMI PHY control register */ 78 #define USBDEVICE_PHY_CONTROL 0x0704 /* USB Device PHY control register */ 79 #define USBHOST_PHY_CONTROL 0x0708 /* USB HOST PHY control register */ 80 #define DAC_PHY_CONTROL 0x070C /* DAC control register */ 81 #define MIPI_PHY0_CONTROL 0x0710 /* MIPI PHY control register */ 82 #define MIPI_PHY1_CONTROL 0x0714 /* MIPI PHY control register */ 83 #define ADC_PHY_CONTROL 0x0718 /* TS-ADC control register */ 84 #define PCIe_PHY_CONTROL 0x071C /* TS-PCIe control register */ 85 #define SATA_PHY_CONTROL 0x0720 /* TS-SATA control register */ 86 #define INFORM0 0x0800 /* Information register 0 */ 87 #define INFORM1 0x0804 /* Information register 1 */ 88 #define INFORM2 0x0808 /* Information register 2 */ 89 #define INFORM3 0x080C /* Information register 3 */ 90 #define INFORM4 0x0810 /* Information register 4 */ 91 #define INFORM5 0x0814 /* Information register 5 */ 92 #define INFORM6 0x0818 /* Information register 6 */ 93 #define INFORM7 0x081C /* Information register 7 */ 94 #define PMU_DEBUG 0x0A00 /* PMU debug register */ 95 /* Registers to set system-level low-power option */ 96 #define ARM_CORE0_SYS_PWR_REG 0x1000 97 #define ARM_CORE1_SYS_PWR_REG 0x1010 98 #define ARM_COMMON_SYS_PWR_REG 0x1080 99 #define ARM_CPU_L2_0_SYS_PWR_REG 0x10C0 100 #define ARM_CPU_L2_1_SYS_PWR_REG 0x10C4 101 #define CMU_ACLKSTOP_SYS_PWR_REG 0x1100 102 #define CMU_SCLKSTOP_SYS_PWR_REG 0x1104 103 #define CMU_RESET_SYS_PWR_REG 0x110C 104 #define APLL_SYSCLK_SYS_PWR_REG 0x1120 105 #define MPLL_SYSCLK_SYS_PWR_REG 0x1124 106 #define VPLL_SYSCLK_SYS_PWR_REG 0x1128 107 #define EPLL_SYSCLK_SYS_PWR_REG 0x112C 108 #define CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG 0x1138 109 #define CMU_RESET_GPS_ALIVE_SYS_PWR_REG 0x113C 110 #define CMU_CLKSTOP_CAM_SYS_PWR_REG 0x1140 111 #define CMU_CLKSTOP_TV_SYS_PWR_REG 0x1144 112 #define CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1148 113 #define CMU_CLKSTOP_G3D_SYS_PWR_REG 0x114C 114 #define CMU_CLKSTOP_LCD0_SYS_PWR_REG 0x1150 115 #define CMU_CLKSTOP_LCD1_SYS_PWR_REG 0x1154 116 #define CMU_CLKSTOP_MAUDIO_SYS_PWR_REG 0x1158 117 #define CMU_CLKSTOP_GPS_SYS_PWR_REG 0x115C 118 #define CMU_RESET_CAM_SYS_PWR_REG 0x1160 119 #define CMU_RESET_TV_SYS_PWR_REG 0x1164 120 #define CMU_RESET_MFC_SYS_PWR_REG 0x1168 121 #define CMU_RESET_G3D_SYS_PWR_REG 0x116C 122 #define CMU_RESET_LCD0_SYS_PWR_REG 0x1170 123 #define CMU_RESET_LCD1_SYS_PWR_REG 0x1174 124 #define CMU_RESET_MAUDIO_SYS_PWR_REG 0x1178 125 #define CMU_RESET_GPS_SYS_PWR_REG 0x117C 126 #define TOP_BUS_SYS_PWR_REG 0x1180 127 #define TOP_RETENTION_SYS_PWR_REG 0x1184 128 #define TOP_PWR_SYS_PWR_REG 0x1188 129 #define LOGIC_RESET_SYS_PWR_REG 0x11A0 130 #define OneNANDXL_MEM_SYS_PWR_REG 0x11C0 131 #define MODEMIF_MEM_SYS_PWR_REG 0x11C4 132 #define USBDEVICE_MEM_SYS_PWR_REG 0x11CC 133 #define SDMMC_MEM_SYS_PWR_REG 0x11D0 134 #define CSSYS_MEM_SYS_PWR_REG 0x11D4 135 #define SECSS_MEM_SYS_PWR_REG 0x11D8 136 #define PCIe_MEM_SYS_PWR_REG 0x11E0 137 #define SATA_MEM_SYS_PWR_REG 0x11E4 138 #define PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200 139 #define PAD_RETENTION_MAUDIO_SYS_PWR_REG 0x1204 140 #define PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220 141 #define PAD_RETENTION_UART_SYS_PWR_REG 0x1224 142 #define PAD_RETENTION_MMCA_SYS_PWR_REG 0x1228 143 #define PAD_RETENTION_MMCB_SYS_PWR_REG 0x122C 144 #define PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230 145 #define PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234 146 #define PAD_ISOLATION_SYS_PWR_REG 0x1240 147 #define PAD_ALV_SEL_SYS_PWR_REG 0x1260 148 #define XUSBXTI_SYS_PWR_REG 0x1280 149 #define XXTI_SYS_PWR_REG 0x1284 150 #define EXT_REGULATOR_SYS_PWR_REG 0x12C0 151 #define GPIO_MODE_SYS_PWR_REG 0x1300 152 #define GPIO_MODE_MAUDIO_SYS_PWR_REG 0x1340 153 #define CAM_SYS_PWR_REG 0x1380 154 #define TV_SYS_PWR_REG 0x1384 155 #define MFC_SYS_PWR_REG 0x1388 156 #define G3D_SYS_PWR_REG 0x138C 157 #define LCD0_SYS_PWR_REG 0x1390 158 #define LCD1_SYS_PWR_REG 0x1394 159 #define MAUDIO_SYS_PWR_REG 0x1398 160 #define GPS_SYS_PWR_REG 0x139C 161 #define GPS_ALIVE_SYS_PWR_REG 0x13A0 162 #define ARM_CORE0_CONFIGURATION 0x2000 /* Configure power mode of ARM_CORE0 */ 163 #define ARM_CORE0_STATUS 0x2004 /* Check power mode of ARM_CORE0 */ 164 #define ARM_CORE0_OPTION 0x2008 /* Sets control options for ARM_CORE0 */ 165 #define ARM_CORE1_CONFIGURATION 0x2080 /* Configure power mode of ARM_CORE1 */ 166 #define ARM_CORE1_STATUS 0x2084 /* Check power mode of ARM_CORE1 */ 167 #define ARM_CORE1_OPTION 0x2088 /* Sets control options for ARM_CORE0 */ 168 #define ARM_COMMON_OPTION 0x2408 /* Sets control options for ARM_COMMON */ 169 /* Configure power mode of ARM_CPU_L2_0 */ 170 #define ARM_CPU_L2_0_CONFIGURATION 0x2600 171 #define ARM_CPU_L2_0_STATUS 0x2604 /* Check power mode of ARM_CPU_L2_0 */ 172 /* Configure power mode of ARM_CPU_L2_1 */ 173 #define ARM_CPU_L2_1_CONFIGURATION 0x2620 174 #define ARM_CPU_L2_1_STATUS 0x2624 /* Check power mode of ARM_CPU_L2_1 */ 175 /* Sets control options for PAD_RETENTION_MAUDIO */ 176 #define PAD_RETENTION_MAUDIO_OPTION 0x3028 177 /* Sets control options for PAD_RETENTION_GPIO */ 178 #define PAD_RETENTION_GPIO_OPTION 0x3108 179 /* Sets control options for PAD_RETENTION_UART */ 180 #define PAD_RETENTION_UART_OPTION 0x3128 181 /* Sets control options for PAD_RETENTION_MMCA */ 182 #define PAD_RETENTION_MMCA_OPTION 0x3148 183 /* Sets control options for PAD_RETENTION_MMCB */ 184 #define PAD_RETENTION_MMCB_OPTION 0x3168 185 /* Sets control options for PAD_RETENTION_EBIA */ 186 #define PAD_RETENTION_EBIA_OPTION 0x3188 187 /* Sets control options for PAD_RETENTION_EBIB */ 188 #define PAD_RETENTION_EBIB_OPTION 0x31A8 189 #define PS_HOLD_CONTROL 0x330C /* PS_HOLD control register */ 190 #define XUSBXTI_CONFIGURATION 0x3400 /* Configure the pad of XUSBXTI */ 191 #define XUSBXTI_STATUS 0x3404 /* Check the pad of XUSBXTI */ 192 /* Sets time required for XUSBXTI to be stabilized */ 193 #define XUSBXTI_DURATION 0x341C 194 #define XXTI_CONFIGURATION 0x3420 /* Configure the pad of XXTI */ 195 #define XXTI_STATUS 0x3424 /* Check the pad of XXTI */ 196 /* Sets time required for XXTI to be stabilized */ 197 #define XXTI_DURATION 0x343C 198 /* Sets time required for EXT_REGULATOR to be stabilized */ 199 #define EXT_REGULATOR_DURATION 0x361C 200 #define CAM_CONFIGURATION 0x3C00 /* Configure power mode of CAM */ 201 #define CAM_STATUS 0x3C04 /* Check power mode of CAM */ 202 #define CAM_OPTION 0x3C08 /* Sets control options for CAM */ 203 #define TV_CONFIGURATION 0x3C20 /* Configure power mode of TV */ 204 #define TV_STATUS 0x3C24 /* Check power mode of TV */ 205 #define TV_OPTION 0x3C28 /* Sets control options for TV */ 206 #define MFC_CONFIGURATION 0x3C40 /* Configure power mode of MFC */ 207 #define MFC_STATUS 0x3C44 /* Check power mode of MFC */ 208 #define MFC_OPTION 0x3C48 /* Sets control options for MFC */ 209 #define G3D_CONFIGURATION 0x3C60 /* Configure power mode of G3D */ 210 #define G3D_STATUS 0x3C64 /* Check power mode of G3D */ 211 #define G3D_OPTION 0x3C68 /* Sets control options for G3D */ 212 #define LCD0_CONFIGURATION 0x3C80 /* Configure power mode of LCD0 */ 213 #define LCD0_STATUS 0x3C84 /* Check power mode of LCD0 */ 214 #define LCD0_OPTION 0x3C88 /* Sets control options for LCD0 */ 215 #define LCD1_CONFIGURATION 0x3CA0 /* Configure power mode of LCD1 */ 216 #define LCD1_STATUS 0x3CA4 /* Check power mode of LCD1 */ 217 #define LCD1_OPTION 0x3CA8 /* Sets control options for LCD1 */ 218 #define GPS_CONFIGURATION 0x3CE0 /* Configure power mode of GPS */ 219 #define GPS_STATUS 0x3CE4 /* Check power mode of GPS */ 220 #define GPS_OPTION 0x3CE8 /* Sets control options for GPS */ 221 #define GPS_ALIVE_CONFIGURATION 0x3D00 /* Configure power mode of GPS */ 222 #define GPS_ALIVE_STATUS 0x3D04 /* Check power mode of GPS */ 223 #define GPS_ALIVE_OPTION 0x3D08 /* Sets control options for GPS */ 224 225 #define EXYNOS4210_PMU_REGS_MEM_SIZE 0x3d0c 226 227 typedef struct Exynos4210PmuReg { 228 const char *name; /* for debug only */ 229 uint32_t offset; 230 uint32_t reset_value; 231 } Exynos4210PmuReg; 232 233 static const Exynos4210PmuReg exynos4210_pmu_regs[] = { 234 {"OM_STAT", OM_STAT, 0x00000000}, 235 {"RTC_CLKO_SEL", RTC_CLKO_SEL, 0x00000000}, 236 {"GNSS_RTC_OUT_CTRL", GNSS_RTC_OUT_CTRL, 0x00000001}, 237 {"SYSTEM_POWER_DOWN_CTRL", SYSTEM_POWER_DOWN_CTRL, 0x00010000}, 238 {"SYSTEM_POWER_DOWN_OPTION", SYSTEM_POWER_DOWN_OPTION, 0x03030000}, 239 {"SWRESET", SWRESET, 0x00000000}, 240 {"RST_STAT", RST_STAT, 0x00000000}, 241 {"WAKEUP_STAT", WAKEUP_STAT, 0x00000000}, 242 {"EINT_WAKEUP_MASK", EINT_WAKEUP_MASK, 0x00000000}, 243 {"WAKEUP_MASK", WAKEUP_MASK, 0x00000000}, 244 {"HDMI_PHY_CONTROL", HDMI_PHY_CONTROL, 0x00960000}, 245 {"USBDEVICE_PHY_CONTROL", USBDEVICE_PHY_CONTROL, 0x00000000}, 246 {"USBHOST_PHY_CONTROL", USBHOST_PHY_CONTROL, 0x00000000}, 247 {"DAC_PHY_CONTROL", DAC_PHY_CONTROL, 0x00000000}, 248 {"MIPI_PHY0_CONTROL", MIPI_PHY0_CONTROL, 0x00000000}, 249 {"MIPI_PHY1_CONTROL", MIPI_PHY1_CONTROL, 0x00000000}, 250 {"ADC_PHY_CONTROL", ADC_PHY_CONTROL, 0x00000001}, 251 {"PCIe_PHY_CONTROL", PCIe_PHY_CONTROL, 0x00000000}, 252 {"SATA_PHY_CONTROL", SATA_PHY_CONTROL, 0x00000000}, 253 {"INFORM0", INFORM0, 0x00000000}, 254 {"INFORM1", INFORM1, 0x00000000}, 255 {"INFORM2", INFORM2, 0x00000000}, 256 {"INFORM3", INFORM3, 0x00000000}, 257 {"INFORM4", INFORM4, 0x00000000}, 258 {"INFORM5", INFORM5, 0x00000000}, 259 {"INFORM6", INFORM6, 0x00000000}, 260 {"INFORM7", INFORM7, 0x00000000}, 261 {"PMU_DEBUG", PMU_DEBUG, 0x00000000}, 262 {"ARM_CORE0_SYS_PWR_REG", ARM_CORE0_SYS_PWR_REG, 0xFFFFFFFF}, 263 {"ARM_CORE1_SYS_PWR_REG", ARM_CORE1_SYS_PWR_REG, 0xFFFFFFFF}, 264 {"ARM_COMMON_SYS_PWR_REG", ARM_COMMON_SYS_PWR_REG, 0xFFFFFFFF}, 265 {"ARM_CPU_L2_0_SYS_PWR_REG", ARM_CPU_L2_0_SYS_PWR_REG, 0xFFFFFFFF}, 266 {"ARM_CPU_L2_1_SYS_PWR_REG", ARM_CPU_L2_1_SYS_PWR_REG, 0xFFFFFFFF}, 267 {"CMU_ACLKSTOP_SYS_PWR_REG", CMU_ACLKSTOP_SYS_PWR_REG, 0xFFFFFFFF}, 268 {"CMU_SCLKSTOP_SYS_PWR_REG", CMU_SCLKSTOP_SYS_PWR_REG, 0xFFFFFFFF}, 269 {"CMU_RESET_SYS_PWR_REG", CMU_RESET_SYS_PWR_REG, 0xFFFFFFFF}, 270 {"APLL_SYSCLK_SYS_PWR_REG", APLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF}, 271 {"MPLL_SYSCLK_SYS_PWR_REG", MPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF}, 272 {"VPLL_SYSCLK_SYS_PWR_REG", VPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF}, 273 {"EPLL_SYSCLK_SYS_PWR_REG", EPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF}, 274 {"CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG", CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG, 275 0xFFFFFFFF}, 276 {"CMU_RESET_GPS_ALIVE_SYS_PWR_REG", CMU_RESET_GPS_ALIVE_SYS_PWR_REG, 277 0xFFFFFFFF}, 278 {"CMU_CLKSTOP_CAM_SYS_PWR_REG", CMU_CLKSTOP_CAM_SYS_PWR_REG, 0xFFFFFFFF}, 279 {"CMU_CLKSTOP_TV_SYS_PWR_REG", CMU_CLKSTOP_TV_SYS_PWR_REG, 0xFFFFFFFF}, 280 {"CMU_CLKSTOP_MFC_SYS_PWR_REG", CMU_CLKSTOP_MFC_SYS_PWR_REG, 0xFFFFFFFF}, 281 {"CMU_CLKSTOP_G3D_SYS_PWR_REG", CMU_CLKSTOP_G3D_SYS_PWR_REG, 0xFFFFFFFF}, 282 {"CMU_CLKSTOP_LCD0_SYS_PWR_REG", CMU_CLKSTOP_LCD0_SYS_PWR_REG, 0xFFFFFFFF}, 283 {"CMU_CLKSTOP_LCD1_SYS_PWR_REG", CMU_CLKSTOP_LCD1_SYS_PWR_REG, 0xFFFFFFFF}, 284 {"CMU_CLKSTOP_MAUDIO_SYS_PWR_REG", CMU_CLKSTOP_MAUDIO_SYS_PWR_REG, 285 0xFFFFFFFF}, 286 {"CMU_CLKSTOP_GPS_SYS_PWR_REG", CMU_CLKSTOP_GPS_SYS_PWR_REG, 0xFFFFFFFF}, 287 {"CMU_RESET_CAM_SYS_PWR_REG", CMU_RESET_CAM_SYS_PWR_REG, 0xFFFFFFFF}, 288 {"CMU_RESET_TV_SYS_PWR_REG", CMU_RESET_TV_SYS_PWR_REG, 0xFFFFFFFF}, 289 {"CMU_RESET_MFC_SYS_PWR_REG", CMU_RESET_MFC_SYS_PWR_REG, 0xFFFFFFFF}, 290 {"CMU_RESET_G3D_SYS_PWR_REG", CMU_RESET_G3D_SYS_PWR_REG, 0xFFFFFFFF}, 291 {"CMU_RESET_LCD0_SYS_PWR_REG", CMU_RESET_LCD0_SYS_PWR_REG, 0xFFFFFFFF}, 292 {"CMU_RESET_LCD1_SYS_PWR_REG", CMU_RESET_LCD1_SYS_PWR_REG, 0xFFFFFFFF}, 293 {"CMU_RESET_MAUDIO_SYS_PWR_REG", CMU_RESET_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF}, 294 {"CMU_RESET_GPS_SYS_PWR_REG", CMU_RESET_GPS_SYS_PWR_REG, 0xFFFFFFFF}, 295 {"TOP_BUS_SYS_PWR_REG", TOP_BUS_SYS_PWR_REG, 0xFFFFFFFF}, 296 {"TOP_RETENTION_SYS_PWR_REG", TOP_RETENTION_SYS_PWR_REG, 0xFFFFFFFF}, 297 {"TOP_PWR_SYS_PWR_REG", TOP_PWR_SYS_PWR_REG, 0xFFFFFFFF}, 298 {"LOGIC_RESET_SYS_PWR_REG", LOGIC_RESET_SYS_PWR_REG, 0xFFFFFFFF}, 299 {"OneNANDXL_MEM_SYS_PWR_REG", OneNANDXL_MEM_SYS_PWR_REG, 0xFFFFFFFF}, 300 {"MODEMIF_MEM_SYS_PWR_REG", MODEMIF_MEM_SYS_PWR_REG, 0xFFFFFFFF}, 301 {"USBDEVICE_MEM_SYS_PWR_REG", USBDEVICE_MEM_SYS_PWR_REG, 0xFFFFFFFF}, 302 {"SDMMC_MEM_SYS_PWR_REG", SDMMC_MEM_SYS_PWR_REG, 0xFFFFFFFF}, 303 {"CSSYS_MEM_SYS_PWR_REG", CSSYS_MEM_SYS_PWR_REG, 0xFFFFFFFF}, 304 {"SECSS_MEM_SYS_PWR_REG", SECSS_MEM_SYS_PWR_REG, 0xFFFFFFFF}, 305 {"PCIe_MEM_SYS_PWR_REG", PCIe_MEM_SYS_PWR_REG, 0xFFFFFFFF}, 306 {"SATA_MEM_SYS_PWR_REG", SATA_MEM_SYS_PWR_REG, 0xFFFFFFFF}, 307 {"PAD_RETENTION_DRAM_SYS_PWR_REG", PAD_RETENTION_DRAM_SYS_PWR_REG, 308 0xFFFFFFFF}, 309 {"PAD_RETENTION_MAUDIO_SYS_PWR_REG", PAD_RETENTION_MAUDIO_SYS_PWR_REG, 310 0xFFFFFFFF}, 311 {"PAD_RETENTION_GPIO_SYS_PWR_REG", PAD_RETENTION_GPIO_SYS_PWR_REG, 312 0xFFFFFFFF}, 313 {"PAD_RETENTION_UART_SYS_PWR_REG", PAD_RETENTION_UART_SYS_PWR_REG, 314 0xFFFFFFFF}, 315 {"PAD_RETENTION_MMCA_SYS_PWR_REG", PAD_RETENTION_MMCA_SYS_PWR_REG, 316 0xFFFFFFFF}, 317 {"PAD_RETENTION_MMCB_SYS_PWR_REG", PAD_RETENTION_MMCB_SYS_PWR_REG, 318 0xFFFFFFFF}, 319 {"PAD_RETENTION_EBIA_SYS_PWR_REG", PAD_RETENTION_EBIA_SYS_PWR_REG, 320 0xFFFFFFFF}, 321 {"PAD_RETENTION_EBIB_SYS_PWR_REG", PAD_RETENTION_EBIB_SYS_PWR_REG, 322 0xFFFFFFFF}, 323 {"PAD_ISOLATION_SYS_PWR_REG", PAD_ISOLATION_SYS_PWR_REG, 0xFFFFFFFF}, 324 {"PAD_ALV_SEL_SYS_PWR_REG", PAD_ALV_SEL_SYS_PWR_REG, 0xFFFFFFFF}, 325 {"XUSBXTI_SYS_PWR_REG", XUSBXTI_SYS_PWR_REG, 0xFFFFFFFF}, 326 {"XXTI_SYS_PWR_REG", XXTI_SYS_PWR_REG, 0xFFFFFFFF}, 327 {"EXT_REGULATOR_SYS_PWR_REG", EXT_REGULATOR_SYS_PWR_REG, 0xFFFFFFFF}, 328 {"GPIO_MODE_SYS_PWR_REG", GPIO_MODE_SYS_PWR_REG, 0xFFFFFFFF}, 329 {"GPIO_MODE_MAUDIO_SYS_PWR_REG", GPIO_MODE_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF}, 330 {"CAM_SYS_PWR_REG", CAM_SYS_PWR_REG, 0xFFFFFFFF}, 331 {"TV_SYS_PWR_REG", TV_SYS_PWR_REG, 0xFFFFFFFF}, 332 {"MFC_SYS_PWR_REG", MFC_SYS_PWR_REG, 0xFFFFFFFF}, 333 {"G3D_SYS_PWR_REG", G3D_SYS_PWR_REG, 0xFFFFFFFF}, 334 {"LCD0_SYS_PWR_REG", LCD0_SYS_PWR_REG, 0xFFFFFFFF}, 335 {"LCD1_SYS_PWR_REG", LCD1_SYS_PWR_REG, 0xFFFFFFFF}, 336 {"MAUDIO_SYS_PWR_REG", MAUDIO_SYS_PWR_REG, 0xFFFFFFFF}, 337 {"GPS_SYS_PWR_REG", GPS_SYS_PWR_REG, 0xFFFFFFFF}, 338 {"GPS_ALIVE_SYS_PWR_REG", GPS_ALIVE_SYS_PWR_REG, 0xFFFFFFFF}, 339 {"ARM_CORE0_CONFIGURATION", ARM_CORE0_CONFIGURATION, 0x00000003}, 340 {"ARM_CORE0_STATUS", ARM_CORE0_STATUS, 0x00030003}, 341 {"ARM_CORE0_OPTION", ARM_CORE0_OPTION, 0x01010001}, 342 {"ARM_CORE1_CONFIGURATION", ARM_CORE1_CONFIGURATION, 0x00000003}, 343 {"ARM_CORE1_STATUS", ARM_CORE1_STATUS, 0x00030003}, 344 {"ARM_CORE1_OPTION", ARM_CORE1_OPTION, 0x01010001}, 345 {"ARM_COMMON_OPTION", ARM_COMMON_OPTION, 0x00000001}, 346 {"ARM_CPU_L2_0_CONFIGURATION", ARM_CPU_L2_0_CONFIGURATION, 0x00000003}, 347 {"ARM_CPU_L2_0_STATUS", ARM_CPU_L2_0_STATUS, 0x00000003}, 348 {"ARM_CPU_L2_1_CONFIGURATION", ARM_CPU_L2_1_CONFIGURATION, 0x00000003}, 349 {"ARM_CPU_L2_1_STATUS", ARM_CPU_L2_1_STATUS, 0x00000003}, 350 {"PAD_RETENTION_MAUDIO_OPTION", PAD_RETENTION_MAUDIO_OPTION, 0x00000000}, 351 {"PAD_RETENTION_GPIO_OPTION", PAD_RETENTION_GPIO_OPTION, 0x00000000}, 352 {"PAD_RETENTION_UART_OPTION", PAD_RETENTION_UART_OPTION, 0x00000000}, 353 {"PAD_RETENTION_MMCA_OPTION", PAD_RETENTION_MMCA_OPTION, 0x00000000}, 354 {"PAD_RETENTION_MMCB_OPTION", PAD_RETENTION_MMCB_OPTION, 0x00000000}, 355 {"PAD_RETENTION_EBIA_OPTION", PAD_RETENTION_EBIA_OPTION, 0x00000000}, 356 {"PAD_RETENTION_EBIB_OPTION", PAD_RETENTION_EBIB_OPTION, 0x00000000}, 357 /* 358 * PS_HOLD_CONTROL: reset value and manually toggle high the DATA bit. 359 * DATA bit high, set usually by bootloader, keeps system on. 360 */ 361 {"PS_HOLD_CONTROL", PS_HOLD_CONTROL, 0x00005200 | BIT(8)}, 362 {"XUSBXTI_CONFIGURATION", XUSBXTI_CONFIGURATION, 0x00000001}, 363 {"XUSBXTI_STATUS", XUSBXTI_STATUS, 0x00000001}, 364 {"XUSBXTI_DURATION", XUSBXTI_DURATION, 0xFFF00000}, 365 {"XXTI_CONFIGURATION", XXTI_CONFIGURATION, 0x00000001}, 366 {"XXTI_STATUS", XXTI_STATUS, 0x00000001}, 367 {"XXTI_DURATION", XXTI_DURATION, 0xFFF00000}, 368 {"EXT_REGULATOR_DURATION", EXT_REGULATOR_DURATION, 0xFFF03FFF}, 369 {"CAM_CONFIGURATION", CAM_CONFIGURATION, 0x00000007}, 370 {"CAM_STATUS", CAM_STATUS, 0x00060007}, 371 {"CAM_OPTION", CAM_OPTION, 0x00000001}, 372 {"TV_CONFIGURATION", TV_CONFIGURATION, 0x00000007}, 373 {"TV_STATUS", TV_STATUS, 0x00060007}, 374 {"TV_OPTION", TV_OPTION, 0x00000001}, 375 {"MFC_CONFIGURATION", MFC_CONFIGURATION, 0x00000007}, 376 {"MFC_STATUS", MFC_STATUS, 0x00060007}, 377 {"MFC_OPTION", MFC_OPTION, 0x00000001}, 378 {"G3D_CONFIGURATION", G3D_CONFIGURATION, 0x00000007}, 379 {"G3D_STATUS", G3D_STATUS, 0x00060007}, 380 {"G3D_OPTION", G3D_OPTION, 0x00000001}, 381 {"LCD0_CONFIGURATION", LCD0_CONFIGURATION, 0x00000007}, 382 {"LCD0_STATUS", LCD0_STATUS, 0x00060007}, 383 {"LCD0_OPTION", LCD0_OPTION, 0x00000001}, 384 {"LCD1_CONFIGURATION", LCD1_CONFIGURATION, 0x00000007}, 385 {"LCD1_STATUS", LCD1_STATUS, 0x00060007}, 386 {"LCD1_OPTION", LCD1_OPTION, 0x00000001}, 387 {"GPS_CONFIGURATION", GPS_CONFIGURATION, 0x00000007}, 388 {"GPS_STATUS", GPS_STATUS, 0x00060007}, 389 {"GPS_OPTION", GPS_OPTION, 0x00000001}, 390 {"GPS_ALIVE_CONFIGURATION", GPS_ALIVE_CONFIGURATION, 0x00000007}, 391 {"GPS_ALIVE_STATUS", GPS_ALIVE_STATUS, 0x00060007}, 392 {"GPS_ALIVE_OPTION", GPS_ALIVE_OPTION, 0x00000001}, 393 }; 394 395 #define PMU_NUM_OF_REGISTERS ARRAY_SIZE(exynos4210_pmu_regs) 396 397 #define TYPE_EXYNOS4210_PMU "exynos4210.pmu" 398 typedef struct Exynos4210PmuState Exynos4210PmuState; 399 DECLARE_INSTANCE_CHECKER(Exynos4210PmuState, EXYNOS4210_PMU, 400 TYPE_EXYNOS4210_PMU) 401 402 struct Exynos4210PmuState { 403 SysBusDevice parent_obj; 404 405 MemoryRegion iomem; 406 uint32_t reg[PMU_NUM_OF_REGISTERS]; 407 }; 408 409 static void exynos4210_pmu_poweroff(void) 410 { 411 PRINT_DEBUG("QEMU PMU: PS_HOLD bit down, powering off\n"); 412 qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); 413 } 414 415 static uint64_t exynos4210_pmu_read(void *opaque, hwaddr offset, 416 unsigned size) 417 { 418 Exynos4210PmuState *s = (Exynos4210PmuState *)opaque; 419 const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs; 420 unsigned int i; 421 422 for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) { 423 if (reg_p->offset == offset) { 424 PRINT_DEBUG_EXTEND("%s [0x%04x] -> 0x%04x\n", reg_p->name, 425 (uint32_t)offset, s->reg[i]); 426 return s->reg[i]; 427 } 428 reg_p++; 429 } 430 PRINT_DEBUG("QEMU PMU ERROR: bad read offset 0x%04x\n", (uint32_t)offset); 431 return 0; 432 } 433 434 static void exynos4210_pmu_write(void *opaque, hwaddr offset, 435 uint64_t val, unsigned size) 436 { 437 Exynos4210PmuState *s = (Exynos4210PmuState *)opaque; 438 const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs; 439 unsigned int i; 440 441 for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) { 442 if (reg_p->offset == offset) { 443 PRINT_DEBUG_EXTEND("%s <0x%04x> <- 0x%04x\n", reg_p->name, 444 (uint32_t)offset, (uint32_t)val); 445 s->reg[i] = val; 446 if ((offset == PS_HOLD_CONTROL) && ((val & BIT(8)) == 0)) { 447 /* 448 * We are interested only in setting data bit 449 * of PS_HOLD_CONTROL register to indicate power off request. 450 */ 451 exynos4210_pmu_poweroff(); 452 } 453 return; 454 } 455 reg_p++; 456 } 457 PRINT_DEBUG("QEMU PMU ERROR: bad write offset 0x%04x\n", (uint32_t)offset); 458 } 459 460 static const MemoryRegionOps exynos4210_pmu_ops = { 461 .read = exynos4210_pmu_read, 462 .write = exynos4210_pmu_write, 463 .endianness = DEVICE_NATIVE_ENDIAN, 464 .valid = { 465 .min_access_size = 4, 466 .max_access_size = 4, 467 .unaligned = false 468 } 469 }; 470 471 static void exynos4210_pmu_reset(DeviceState *dev) 472 { 473 Exynos4210PmuState *s = EXYNOS4210_PMU(dev); 474 unsigned i; 475 476 /* Set default values for registers */ 477 for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) { 478 s->reg[i] = exynos4210_pmu_regs[i].reset_value; 479 } 480 } 481 482 static void exynos4210_pmu_init(Object *obj) 483 { 484 Exynos4210PmuState *s = EXYNOS4210_PMU(obj); 485 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 486 487 /* memory mapping */ 488 memory_region_init_io(&s->iomem, obj, &exynos4210_pmu_ops, s, 489 "exynos4210.pmu", EXYNOS4210_PMU_REGS_MEM_SIZE); 490 sysbus_init_mmio(dev, &s->iomem); 491 } 492 493 static const VMStateDescription exynos4210_pmu_vmstate = { 494 .name = "exynos4210.pmu", 495 .version_id = 1, 496 .minimum_version_id = 1, 497 .fields = (VMStateField[]) { 498 VMSTATE_UINT32_ARRAY(reg, Exynos4210PmuState, PMU_NUM_OF_REGISTERS), 499 VMSTATE_END_OF_LIST() 500 } 501 }; 502 503 static void exynos4210_pmu_class_init(ObjectClass *klass, void *data) 504 { 505 DeviceClass *dc = DEVICE_CLASS(klass); 506 507 dc->reset = exynos4210_pmu_reset; 508 dc->vmsd = &exynos4210_pmu_vmstate; 509 } 510 511 static const TypeInfo exynos4210_pmu_info = { 512 .name = TYPE_EXYNOS4210_PMU, 513 .parent = TYPE_SYS_BUS_DEVICE, 514 .instance_size = sizeof(Exynos4210PmuState), 515 .instance_init = exynos4210_pmu_init, 516 .class_init = exynos4210_pmu_class_init, 517 }; 518 519 static void exynos4210_pmu_register(void) 520 { 521 type_register_static(&exynos4210_pmu_info); 522 } 523 524 type_init(exynos4210_pmu_register) 525