xref: /openbmc/qemu/hw/misc/exynos4210_pmu.c (revision e4ea952f)
1 /*
2  *  Exynos4210 Power Management Unit (PMU) Emulation
3  *
4  *  Copyright (C) 2011 Samsung Electronics Co Ltd.
5  *    Maksim Kozlov <m.kozlov@samsung.com>
6  *
7  *  This program is free software; you can redistribute it and/or modify it
8  *  under the terms of the GNU General Public License as published by the
9  *  Free Software Foundation; either version 2 of the License, or
10  *  (at your option) any later version.
11  *
12  *  This program is distributed in the hope that it will be useful, but WITHOUT
13  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14  *  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
15  *  for more details.
16  *
17  *  You should have received a copy of the GNU General Public License along
18  *  with this program; if not, see <http://www.gnu.org/licenses/>.
19  */
20 
21 /*
22  * This model implements PMU registers just as a bulk of memory. Currently,
23  * the only reason this device exists is that secondary CPU boot loader
24  * uses PMU INFORM5 register as a holding pen.
25  */
26 
27 #include "qemu/osdep.h"
28 #include "hw/sysbus.h"
29 #include "migration/vmstate.h"
30 #include "qemu/module.h"
31 #include "sysemu/runstate.h"
32 #include "qom/object.h"
33 
34 #ifndef DEBUG_PMU
35 #define DEBUG_PMU           0
36 #endif
37 
38 #ifndef DEBUG_PMU_EXTEND
39 #define DEBUG_PMU_EXTEND    0
40 #endif
41 
42 #if DEBUG_PMU
43 #define  PRINT_DEBUG(fmt, args...)  \
44         do { \
45             fprintf(stderr, "  [%s:%d]   "fmt, __func__, __LINE__, ##args); \
46         } while (0)
47 
48 #if DEBUG_PMU_EXTEND
49 #define  PRINT_DEBUG_EXTEND(fmt, args...) \
50         do { \
51             fprintf(stderr, "  [%s:%d]   "fmt, __func__, __LINE__, ##args); \
52         } while (0)
53 #else
54 #define  PRINT_DEBUG_EXTEND(fmt, args...)  do {} while (0)
55 #endif /* EXTEND */
56 
57 #else
58 #define  PRINT_DEBUG(fmt, args...)   do {} while (0)
59 #define  PRINT_DEBUG_EXTEND(fmt, args...)  do {} while (0)
60 #endif
61 
62 /*
63  *  Offsets for PMU registers
64  */
65 #define OM_STAT                  0x0000 /* OM status register */
66 #define RTC_CLKO_SEL             0x000C /* Controls RTCCLKOUT */
67 #define GNSS_RTC_OUT_CTRL        0x0010 /* Controls GNSS_RTC_OUT */
68 /* Decides whether system-level low-power mode is used. */
69 #define SYSTEM_POWER_DOWN_CTRL   0x0200
70 /* Sets control options for CENTRAL_SEQ */
71 #define SYSTEM_POWER_DOWN_OPTION 0x0208
72 #define SWRESET                  0x0400 /* Generate software reset */
73 #define RST_STAT                 0x0404 /* Reset status register */
74 #define WAKEUP_STAT              0x0600 /* Wakeup status register  */
75 #define EINT_WAKEUP_MASK         0x0604 /* Configure External INTerrupt mask */
76 #define WAKEUP_MASK              0x0608 /* Configure wakeup source mask */
77 #define HDMI_PHY_CONTROL         0x0700 /* HDMI PHY control register */
78 #define USBDEVICE_PHY_CONTROL    0x0704 /* USB Device PHY control register */
79 #define USBHOST_PHY_CONTROL      0x0708 /* USB HOST PHY control register */
80 #define DAC_PHY_CONTROL          0x070C /* DAC control register  */
81 #define MIPI_PHY0_CONTROL        0x0710 /* MIPI PHY control register */
82 #define MIPI_PHY1_CONTROL        0x0714 /* MIPI PHY control register */
83 #define ADC_PHY_CONTROL          0x0718 /* TS-ADC control register */
84 #define PCIe_PHY_CONTROL         0x071C /* TS-PCIe control register */
85 #define SATA_PHY_CONTROL         0x0720 /* TS-SATA control register */
86 #define INFORM0                  0x0800 /* Information register 0  */
87 #define INFORM1                  0x0804 /* Information register 1  */
88 #define INFORM2                  0x0808 /* Information register 2  */
89 #define INFORM3                  0x080C /* Information register 3  */
90 #define INFORM4                  0x0810 /* Information register 4  */
91 #define INFORM5                  0x0814 /* Information register 5  */
92 #define INFORM6                  0x0818 /* Information register 6  */
93 #define INFORM7                  0x081C /* Information register 7  */
94 #define PMU_DEBUG                0x0A00 /* PMU debug register */
95 /* Registers to set system-level low-power option */
96 #define ARM_CORE0_SYS_PWR_REG              0x1000
97 #define ARM_CORE1_SYS_PWR_REG              0x1010
98 #define ARM_COMMON_SYS_PWR_REG             0x1080
99 #define ARM_CPU_L2_0_SYS_PWR_REG           0x10C0
100 #define ARM_CPU_L2_1_SYS_PWR_REG           0x10C4
101 #define CMU_ACLKSTOP_SYS_PWR_REG           0x1100
102 #define CMU_SCLKSTOP_SYS_PWR_REG           0x1104
103 #define CMU_RESET_SYS_PWR_REG              0x110C
104 #define APLL_SYSCLK_SYS_PWR_REG            0x1120
105 #define MPLL_SYSCLK_SYS_PWR_REG            0x1124
106 #define VPLL_SYSCLK_SYS_PWR_REG            0x1128
107 #define EPLL_SYSCLK_SYS_PWR_REG            0x112C
108 #define CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG  0x1138
109 #define CMU_RESET_GPS_ALIVE_SYS_PWR_REG    0x113C
110 #define CMU_CLKSTOP_CAM_SYS_PWR_REG        0x1140
111 #define CMU_CLKSTOP_TV_SYS_PWR_REG         0x1144
112 #define CMU_CLKSTOP_MFC_SYS_PWR_REG        0x1148
113 #define CMU_CLKSTOP_G3D_SYS_PWR_REG        0x114C
114 #define CMU_CLKSTOP_LCD0_SYS_PWR_REG       0x1150
115 #define CMU_CLKSTOP_LCD1_SYS_PWR_REG       0x1154
116 #define CMU_CLKSTOP_MAUDIO_SYS_PWR_REG     0x1158
117 #define CMU_CLKSTOP_GPS_SYS_PWR_REG        0x115C
118 #define CMU_RESET_CAM_SYS_PWR_REG          0x1160
119 #define CMU_RESET_TV_SYS_PWR_REG           0x1164
120 #define CMU_RESET_MFC_SYS_PWR_REG          0x1168
121 #define CMU_RESET_G3D_SYS_PWR_REG          0x116C
122 #define CMU_RESET_LCD0_SYS_PWR_REG         0x1170
123 #define CMU_RESET_LCD1_SYS_PWR_REG         0x1174
124 #define CMU_RESET_MAUDIO_SYS_PWR_REG       0x1178
125 #define CMU_RESET_GPS_SYS_PWR_REG          0x117C
126 #define TOP_BUS_SYS_PWR_REG                0x1180
127 #define TOP_RETENTION_SYS_PWR_REG          0x1184
128 #define TOP_PWR_SYS_PWR_REG                0x1188
129 #define LOGIC_RESET_SYS_PWR_REG            0x11A0
130 #define OneNANDXL_MEM_SYS_PWR_REG          0x11C0
131 #define MODEMIF_MEM_SYS_PWR_REG            0x11C4
132 #define USBDEVICE_MEM_SYS_PWR_REG          0x11CC
133 #define SDMMC_MEM_SYS_PWR_REG              0x11D0
134 #define CSSYS_MEM_SYS_PWR_REG              0x11D4
135 #define SECSS_MEM_SYS_PWR_REG              0x11D8
136 #define PCIe_MEM_SYS_PWR_REG               0x11E0
137 #define SATA_MEM_SYS_PWR_REG               0x11E4
138 #define PAD_RETENTION_DRAM_SYS_PWR_REG     0x1200
139 #define PAD_RETENTION_MAUDIO_SYS_PWR_REG   0x1204
140 #define PAD_RETENTION_GPIO_SYS_PWR_REG     0x1220
141 #define PAD_RETENTION_UART_SYS_PWR_REG     0x1224
142 #define PAD_RETENTION_MMCA_SYS_PWR_REG     0x1228
143 #define PAD_RETENTION_MMCB_SYS_PWR_REG     0x122C
144 #define PAD_RETENTION_EBIA_SYS_PWR_REG     0x1230
145 #define PAD_RETENTION_EBIB_SYS_PWR_REG     0x1234
146 #define PAD_ISOLATION_SYS_PWR_REG          0x1240
147 #define PAD_ALV_SEL_SYS_PWR_REG            0x1260
148 #define XUSBXTI_SYS_PWR_REG                0x1280
149 #define XXTI_SYS_PWR_REG                   0x1284
150 #define EXT_REGULATOR_SYS_PWR_REG          0x12C0
151 #define GPIO_MODE_SYS_PWR_REG              0x1300
152 #define GPIO_MODE_MAUDIO_SYS_PWR_REG       0x1340
153 #define CAM_SYS_PWR_REG                    0x1380
154 #define TV_SYS_PWR_REG                     0x1384
155 #define MFC_SYS_PWR_REG                    0x1388
156 #define G3D_SYS_PWR_REG                    0x138C
157 #define LCD0_SYS_PWR_REG                   0x1390
158 #define LCD1_SYS_PWR_REG                   0x1394
159 #define MAUDIO_SYS_PWR_REG                 0x1398
160 #define GPS_SYS_PWR_REG                    0x139C
161 #define GPS_ALIVE_SYS_PWR_REG              0x13A0
162 #define ARM_CORE0_CONFIGURATION 0x2000 /* Configure power mode of ARM_CORE0 */
163 #define ARM_CORE0_STATUS        0x2004 /* Check power mode of ARM_CORE0 */
164 #define ARM_CORE0_OPTION        0x2008 /* Sets control options for ARM_CORE0 */
165 #define ARM_CORE1_CONFIGURATION 0x2080 /* Configure power mode of ARM_CORE1 */
166 #define ARM_CORE1_STATUS        0x2084 /* Check power mode of ARM_CORE1 */
167 #define ARM_CORE1_OPTION        0x2088 /* Sets control options for ARM_CORE0 */
168 #define ARM_COMMON_OPTION       0x2408 /* Sets control options for ARM_COMMON */
169 /* Configure power mode of ARM_CPU_L2_0 */
170 #define ARM_CPU_L2_0_CONFIGURATION 0x2600
171 #define ARM_CPU_L2_0_STATUS        0x2604 /* Check power mode of ARM_CPU_L2_0 */
172 /* Configure power mode of ARM_CPU_L2_1 */
173 #define ARM_CPU_L2_1_CONFIGURATION 0x2620
174 #define ARM_CPU_L2_1_STATUS        0x2624 /* Check power mode of ARM_CPU_L2_1 */
175 /* Sets control options for PAD_RETENTION_MAUDIO */
176 #define PAD_RETENTION_MAUDIO_OPTION 0x3028
177 /* Sets control options for PAD_RETENTION_GPIO */
178 #define PAD_RETENTION_GPIO_OPTION   0x3108
179 /* Sets control options for PAD_RETENTION_UART */
180 #define PAD_RETENTION_UART_OPTION   0x3128
181 /* Sets control options for PAD_RETENTION_MMCA */
182 #define PAD_RETENTION_MMCA_OPTION   0x3148
183 /* Sets control options for PAD_RETENTION_MMCB */
184 #define PAD_RETENTION_MMCB_OPTION   0x3168
185 /* Sets control options for PAD_RETENTION_EBIA */
186 #define PAD_RETENTION_EBIA_OPTION   0x3188
187 /* Sets control options for PAD_RETENTION_EBIB */
188 #define PAD_RETENTION_EBIB_OPTION   0x31A8
189 #define PS_HOLD_CONTROL         0x330C /* PS_HOLD control register */
190 #define XUSBXTI_CONFIGURATION   0x3400 /* Configure the pad of XUSBXTI */
191 #define XUSBXTI_STATUS          0x3404 /* Check the pad of XUSBXTI */
192 /* Sets time required for XUSBXTI to be stabilized */
193 #define XUSBXTI_DURATION        0x341C
194 #define XXTI_CONFIGURATION      0x3420 /* Configure the pad of XXTI */
195 #define XXTI_STATUS             0x3424 /* Check the pad of XXTI */
196 /* Sets time required for XXTI to be stabilized */
197 #define XXTI_DURATION           0x343C
198 /* Sets time required for EXT_REGULATOR to be stabilized */
199 #define EXT_REGULATOR_DURATION  0x361C
200 #define CAM_CONFIGURATION       0x3C00 /* Configure power mode of CAM */
201 #define CAM_STATUS              0x3C04 /* Check power mode of CAM */
202 #define CAM_OPTION              0x3C08 /* Sets control options for CAM */
203 #define TV_CONFIGURATION        0x3C20 /* Configure power mode of TV */
204 #define TV_STATUS               0x3C24 /* Check power mode of TV */
205 #define TV_OPTION               0x3C28 /* Sets control options for TV */
206 #define MFC_CONFIGURATION       0x3C40 /* Configure power mode of MFC */
207 #define MFC_STATUS              0x3C44 /* Check power mode of MFC */
208 #define MFC_OPTION              0x3C48 /* Sets control options for MFC */
209 #define G3D_CONFIGURATION       0x3C60 /* Configure power mode of G3D */
210 #define G3D_STATUS              0x3C64 /* Check power mode of G3D */
211 #define G3D_OPTION              0x3C68 /* Sets control options for G3D */
212 #define LCD0_CONFIGURATION      0x3C80 /* Configure power mode of LCD0 */
213 #define LCD0_STATUS             0x3C84 /* Check power mode of LCD0 */
214 #define LCD0_OPTION             0x3C88 /* Sets control options for LCD0 */
215 #define LCD1_CONFIGURATION      0x3CA0 /* Configure power mode of LCD1 */
216 #define LCD1_STATUS             0x3CA4 /* Check power mode of LCD1 */
217 #define LCD1_OPTION             0x3CA8 /* Sets control options for LCD1 */
218 #define GPS_CONFIGURATION       0x3CE0 /* Configure power mode of GPS */
219 #define GPS_STATUS              0x3CE4 /* Check power mode of GPS */
220 #define GPS_OPTION              0x3CE8 /* Sets control options for GPS */
221 #define GPS_ALIVE_CONFIGURATION 0x3D00 /* Configure power mode of GPS */
222 #define GPS_ALIVE_STATUS        0x3D04 /* Check power mode of GPS */
223 #define GPS_ALIVE_OPTION        0x3D08 /* Sets control options for GPS */
224 
225 #define EXYNOS4210_PMU_REGS_MEM_SIZE 0x3d0c
226 
227 typedef struct Exynos4210PmuReg {
228     const char  *name; /* for debug only */
229     uint32_t     offset;
230     uint32_t     reset_value;
231 } Exynos4210PmuReg;
232 
233 static const Exynos4210PmuReg exynos4210_pmu_regs[] = {
234     {"OM_STAT", OM_STAT, 0x00000000},
235     {"RTC_CLKO_SEL", RTC_CLKO_SEL, 0x00000000},
236     {"GNSS_RTC_OUT_CTRL", GNSS_RTC_OUT_CTRL, 0x00000001},
237     {"SYSTEM_POWER_DOWN_CTRL", SYSTEM_POWER_DOWN_CTRL, 0x00010000},
238     {"SYSTEM_POWER_DOWN_OPTION", SYSTEM_POWER_DOWN_OPTION, 0x03030000},
239     {"SWRESET", SWRESET, 0x00000000},
240     {"RST_STAT", RST_STAT, 0x00000000},
241     {"WAKEUP_STAT", WAKEUP_STAT, 0x00000000},
242     {"EINT_WAKEUP_MASK", EINT_WAKEUP_MASK, 0x00000000},
243     {"WAKEUP_MASK", WAKEUP_MASK, 0x00000000},
244     {"HDMI_PHY_CONTROL", HDMI_PHY_CONTROL, 0x00960000},
245     {"USBDEVICE_PHY_CONTROL", USBDEVICE_PHY_CONTROL, 0x00000000},
246     {"USBHOST_PHY_CONTROL", USBHOST_PHY_CONTROL, 0x00000000},
247     {"DAC_PHY_CONTROL", DAC_PHY_CONTROL, 0x00000000},
248     {"MIPI_PHY0_CONTROL", MIPI_PHY0_CONTROL, 0x00000000},
249     {"MIPI_PHY1_CONTROL", MIPI_PHY1_CONTROL, 0x00000000},
250     {"ADC_PHY_CONTROL", ADC_PHY_CONTROL, 0x00000001},
251     {"PCIe_PHY_CONTROL", PCIe_PHY_CONTROL, 0x00000000},
252     {"SATA_PHY_CONTROL", SATA_PHY_CONTROL, 0x00000000},
253     {"INFORM0", INFORM0, 0x00000000},
254     {"INFORM1", INFORM1, 0x00000000},
255     {"INFORM2", INFORM2, 0x00000000},
256     {"INFORM3", INFORM3, 0x00000000},
257     {"INFORM4", INFORM4, 0x00000000},
258     {"INFORM5", INFORM5, 0x00000000},
259     {"INFORM6", INFORM6, 0x00000000},
260     {"INFORM7", INFORM7, 0x00000000},
261     {"PMU_DEBUG", PMU_DEBUG, 0x00000000},
262     {"ARM_CORE0_SYS_PWR_REG", ARM_CORE0_SYS_PWR_REG, 0xFFFFFFFF},
263     {"ARM_CORE1_SYS_PWR_REG", ARM_CORE1_SYS_PWR_REG, 0xFFFFFFFF},
264     {"ARM_COMMON_SYS_PWR_REG", ARM_COMMON_SYS_PWR_REG, 0xFFFFFFFF},
265     {"ARM_CPU_L2_0_SYS_PWR_REG", ARM_CPU_L2_0_SYS_PWR_REG, 0xFFFFFFFF},
266     {"ARM_CPU_L2_1_SYS_PWR_REG", ARM_CPU_L2_1_SYS_PWR_REG, 0xFFFFFFFF},
267     {"CMU_ACLKSTOP_SYS_PWR_REG", CMU_ACLKSTOP_SYS_PWR_REG, 0xFFFFFFFF},
268     {"CMU_SCLKSTOP_SYS_PWR_REG", CMU_SCLKSTOP_SYS_PWR_REG, 0xFFFFFFFF},
269     {"CMU_RESET_SYS_PWR_REG", CMU_RESET_SYS_PWR_REG, 0xFFFFFFFF},
270     {"APLL_SYSCLK_SYS_PWR_REG", APLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
271     {"MPLL_SYSCLK_SYS_PWR_REG", MPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
272     {"VPLL_SYSCLK_SYS_PWR_REG", VPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
273     {"EPLL_SYSCLK_SYS_PWR_REG", EPLL_SYSCLK_SYS_PWR_REG, 0xFFFFFFFF},
274     {"CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG", CMU_CLKSTOP_GPS_ALIVE_SYS_PWR_REG,
275             0xFFFFFFFF},
276     {"CMU_RESET_GPS_ALIVE_SYS_PWR_REG", CMU_RESET_GPS_ALIVE_SYS_PWR_REG,
277             0xFFFFFFFF},
278     {"CMU_CLKSTOP_CAM_SYS_PWR_REG", CMU_CLKSTOP_CAM_SYS_PWR_REG, 0xFFFFFFFF},
279     {"CMU_CLKSTOP_TV_SYS_PWR_REG", CMU_CLKSTOP_TV_SYS_PWR_REG, 0xFFFFFFFF},
280     {"CMU_CLKSTOP_MFC_SYS_PWR_REG", CMU_CLKSTOP_MFC_SYS_PWR_REG, 0xFFFFFFFF},
281     {"CMU_CLKSTOP_G3D_SYS_PWR_REG", CMU_CLKSTOP_G3D_SYS_PWR_REG, 0xFFFFFFFF},
282     {"CMU_CLKSTOP_LCD0_SYS_PWR_REG", CMU_CLKSTOP_LCD0_SYS_PWR_REG, 0xFFFFFFFF},
283     {"CMU_CLKSTOP_LCD1_SYS_PWR_REG", CMU_CLKSTOP_LCD1_SYS_PWR_REG, 0xFFFFFFFF},
284     {"CMU_CLKSTOP_MAUDIO_SYS_PWR_REG", CMU_CLKSTOP_MAUDIO_SYS_PWR_REG,
285             0xFFFFFFFF},
286     {"CMU_CLKSTOP_GPS_SYS_PWR_REG", CMU_CLKSTOP_GPS_SYS_PWR_REG, 0xFFFFFFFF},
287     {"CMU_RESET_CAM_SYS_PWR_REG", CMU_RESET_CAM_SYS_PWR_REG, 0xFFFFFFFF},
288     {"CMU_RESET_TV_SYS_PWR_REG", CMU_RESET_TV_SYS_PWR_REG, 0xFFFFFFFF},
289     {"CMU_RESET_MFC_SYS_PWR_REG", CMU_RESET_MFC_SYS_PWR_REG, 0xFFFFFFFF},
290     {"CMU_RESET_G3D_SYS_PWR_REG", CMU_RESET_G3D_SYS_PWR_REG, 0xFFFFFFFF},
291     {"CMU_RESET_LCD0_SYS_PWR_REG", CMU_RESET_LCD0_SYS_PWR_REG, 0xFFFFFFFF},
292     {"CMU_RESET_LCD1_SYS_PWR_REG", CMU_RESET_LCD1_SYS_PWR_REG, 0xFFFFFFFF},
293     {"CMU_RESET_MAUDIO_SYS_PWR_REG", CMU_RESET_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
294     {"CMU_RESET_GPS_SYS_PWR_REG", CMU_RESET_GPS_SYS_PWR_REG, 0xFFFFFFFF},
295     {"TOP_BUS_SYS_PWR_REG", TOP_BUS_SYS_PWR_REG, 0xFFFFFFFF},
296     {"TOP_RETENTION_SYS_PWR_REG", TOP_RETENTION_SYS_PWR_REG, 0xFFFFFFFF},
297     {"TOP_PWR_SYS_PWR_REG", TOP_PWR_SYS_PWR_REG, 0xFFFFFFFF},
298     {"LOGIC_RESET_SYS_PWR_REG", LOGIC_RESET_SYS_PWR_REG, 0xFFFFFFFF},
299     {"OneNANDXL_MEM_SYS_PWR_REG", OneNANDXL_MEM_SYS_PWR_REG, 0xFFFFFFFF},
300     {"MODEMIF_MEM_SYS_PWR_REG", MODEMIF_MEM_SYS_PWR_REG, 0xFFFFFFFF},
301     {"USBDEVICE_MEM_SYS_PWR_REG", USBDEVICE_MEM_SYS_PWR_REG, 0xFFFFFFFF},
302     {"SDMMC_MEM_SYS_PWR_REG", SDMMC_MEM_SYS_PWR_REG, 0xFFFFFFFF},
303     {"CSSYS_MEM_SYS_PWR_REG", CSSYS_MEM_SYS_PWR_REG, 0xFFFFFFFF},
304     {"SECSS_MEM_SYS_PWR_REG", SECSS_MEM_SYS_PWR_REG, 0xFFFFFFFF},
305     {"PCIe_MEM_SYS_PWR_REG", PCIe_MEM_SYS_PWR_REG, 0xFFFFFFFF},
306     {"SATA_MEM_SYS_PWR_REG", SATA_MEM_SYS_PWR_REG, 0xFFFFFFFF},
307     {"PAD_RETENTION_DRAM_SYS_PWR_REG", PAD_RETENTION_DRAM_SYS_PWR_REG,
308             0xFFFFFFFF},
309     {"PAD_RETENTION_MAUDIO_SYS_PWR_REG", PAD_RETENTION_MAUDIO_SYS_PWR_REG,
310             0xFFFFFFFF},
311     {"PAD_RETENTION_GPIO_SYS_PWR_REG", PAD_RETENTION_GPIO_SYS_PWR_REG,
312             0xFFFFFFFF},
313     {"PAD_RETENTION_UART_SYS_PWR_REG", PAD_RETENTION_UART_SYS_PWR_REG,
314             0xFFFFFFFF},
315     {"PAD_RETENTION_MMCA_SYS_PWR_REG", PAD_RETENTION_MMCA_SYS_PWR_REG,
316             0xFFFFFFFF},
317     {"PAD_RETENTION_MMCB_SYS_PWR_REG", PAD_RETENTION_MMCB_SYS_PWR_REG,
318             0xFFFFFFFF},
319     {"PAD_RETENTION_EBIA_SYS_PWR_REG", PAD_RETENTION_EBIA_SYS_PWR_REG,
320             0xFFFFFFFF},
321     {"PAD_RETENTION_EBIB_SYS_PWR_REG", PAD_RETENTION_EBIB_SYS_PWR_REG,
322             0xFFFFFFFF},
323     {"PAD_ISOLATION_SYS_PWR_REG", PAD_ISOLATION_SYS_PWR_REG, 0xFFFFFFFF},
324     {"PAD_ALV_SEL_SYS_PWR_REG", PAD_ALV_SEL_SYS_PWR_REG, 0xFFFFFFFF},
325     {"XUSBXTI_SYS_PWR_REG", XUSBXTI_SYS_PWR_REG, 0xFFFFFFFF},
326     {"XXTI_SYS_PWR_REG", XXTI_SYS_PWR_REG, 0xFFFFFFFF},
327     {"EXT_REGULATOR_SYS_PWR_REG", EXT_REGULATOR_SYS_PWR_REG, 0xFFFFFFFF},
328     {"GPIO_MODE_SYS_PWR_REG", GPIO_MODE_SYS_PWR_REG, 0xFFFFFFFF},
329     {"GPIO_MODE_MAUDIO_SYS_PWR_REG", GPIO_MODE_MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
330     {"CAM_SYS_PWR_REG", CAM_SYS_PWR_REG, 0xFFFFFFFF},
331     {"TV_SYS_PWR_REG", TV_SYS_PWR_REG, 0xFFFFFFFF},
332     {"MFC_SYS_PWR_REG", MFC_SYS_PWR_REG, 0xFFFFFFFF},
333     {"G3D_SYS_PWR_REG", G3D_SYS_PWR_REG, 0xFFFFFFFF},
334     {"LCD0_SYS_PWR_REG", LCD0_SYS_PWR_REG, 0xFFFFFFFF},
335     {"LCD1_SYS_PWR_REG", LCD1_SYS_PWR_REG, 0xFFFFFFFF},
336     {"MAUDIO_SYS_PWR_REG", MAUDIO_SYS_PWR_REG, 0xFFFFFFFF},
337     {"GPS_SYS_PWR_REG", GPS_SYS_PWR_REG, 0xFFFFFFFF},
338     {"GPS_ALIVE_SYS_PWR_REG", GPS_ALIVE_SYS_PWR_REG, 0xFFFFFFFF},
339     {"ARM_CORE0_CONFIGURATION", ARM_CORE0_CONFIGURATION, 0x00000003},
340     {"ARM_CORE0_STATUS", ARM_CORE0_STATUS, 0x00030003},
341     {"ARM_CORE0_OPTION", ARM_CORE0_OPTION, 0x01010001},
342     {"ARM_CORE1_CONFIGURATION", ARM_CORE1_CONFIGURATION, 0x00000003},
343     {"ARM_CORE1_STATUS", ARM_CORE1_STATUS, 0x00030003},
344     {"ARM_CORE1_OPTION", ARM_CORE1_OPTION, 0x01010001},
345     {"ARM_COMMON_OPTION", ARM_COMMON_OPTION, 0x00000001},
346     {"ARM_CPU_L2_0_CONFIGURATION", ARM_CPU_L2_0_CONFIGURATION, 0x00000003},
347     {"ARM_CPU_L2_0_STATUS", ARM_CPU_L2_0_STATUS, 0x00000003},
348     {"ARM_CPU_L2_1_CONFIGURATION", ARM_CPU_L2_1_CONFIGURATION, 0x00000003},
349     {"ARM_CPU_L2_1_STATUS", ARM_CPU_L2_1_STATUS, 0x00000003},
350     {"PAD_RETENTION_MAUDIO_OPTION", PAD_RETENTION_MAUDIO_OPTION, 0x00000000},
351     {"PAD_RETENTION_GPIO_OPTION", PAD_RETENTION_GPIO_OPTION, 0x00000000},
352     {"PAD_RETENTION_UART_OPTION", PAD_RETENTION_UART_OPTION, 0x00000000},
353     {"PAD_RETENTION_MMCA_OPTION", PAD_RETENTION_MMCA_OPTION, 0x00000000},
354     {"PAD_RETENTION_MMCB_OPTION", PAD_RETENTION_MMCB_OPTION, 0x00000000},
355     {"PAD_RETENTION_EBIA_OPTION", PAD_RETENTION_EBIA_OPTION, 0x00000000},
356     {"PAD_RETENTION_EBIB_OPTION", PAD_RETENTION_EBIB_OPTION, 0x00000000},
357     /*
358      * PS_HOLD_CONTROL: reset value and manually toggle high the DATA bit.
359      * DATA bit high, set usually by bootloader, keeps system on.
360      */
361     {"PS_HOLD_CONTROL", PS_HOLD_CONTROL, 0x00005200 | BIT(8)},
362     {"XUSBXTI_CONFIGURATION", XUSBXTI_CONFIGURATION, 0x00000001},
363     {"XUSBXTI_STATUS", XUSBXTI_STATUS, 0x00000001},
364     {"XUSBXTI_DURATION", XUSBXTI_DURATION, 0xFFF00000},
365     {"XXTI_CONFIGURATION", XXTI_CONFIGURATION, 0x00000001},
366     {"XXTI_STATUS", XXTI_STATUS, 0x00000001},
367     {"XXTI_DURATION", XXTI_DURATION, 0xFFF00000},
368     {"EXT_REGULATOR_DURATION", EXT_REGULATOR_DURATION, 0xFFF03FFF},
369     {"CAM_CONFIGURATION", CAM_CONFIGURATION, 0x00000007},
370     {"CAM_STATUS", CAM_STATUS, 0x00060007},
371     {"CAM_OPTION", CAM_OPTION, 0x00000001},
372     {"TV_CONFIGURATION", TV_CONFIGURATION, 0x00000007},
373     {"TV_STATUS", TV_STATUS, 0x00060007},
374     {"TV_OPTION", TV_OPTION, 0x00000001},
375     {"MFC_CONFIGURATION", MFC_CONFIGURATION, 0x00000007},
376     {"MFC_STATUS", MFC_STATUS, 0x00060007},
377     {"MFC_OPTION", MFC_OPTION, 0x00000001},
378     {"G3D_CONFIGURATION", G3D_CONFIGURATION, 0x00000007},
379     {"G3D_STATUS", G3D_STATUS, 0x00060007},
380     {"G3D_OPTION", G3D_OPTION, 0x00000001},
381     {"LCD0_CONFIGURATION", LCD0_CONFIGURATION, 0x00000007},
382     {"LCD0_STATUS", LCD0_STATUS, 0x00060007},
383     {"LCD0_OPTION", LCD0_OPTION, 0x00000001},
384     {"LCD1_CONFIGURATION", LCD1_CONFIGURATION, 0x00000007},
385     {"LCD1_STATUS", LCD1_STATUS, 0x00060007},
386     {"LCD1_OPTION", LCD1_OPTION, 0x00000001},
387     {"GPS_CONFIGURATION", GPS_CONFIGURATION, 0x00000007},
388     {"GPS_STATUS", GPS_STATUS, 0x00060007},
389     {"GPS_OPTION", GPS_OPTION, 0x00000001},
390     {"GPS_ALIVE_CONFIGURATION", GPS_ALIVE_CONFIGURATION, 0x00000007},
391     {"GPS_ALIVE_STATUS", GPS_ALIVE_STATUS, 0x00060007},
392     {"GPS_ALIVE_OPTION", GPS_ALIVE_OPTION, 0x00000001},
393 };
394 
395 #define PMU_NUM_OF_REGISTERS ARRAY_SIZE(exynos4210_pmu_regs)
396 
397 #define TYPE_EXYNOS4210_PMU "exynos4210.pmu"
398 OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210PmuState, EXYNOS4210_PMU)
399 
400 struct Exynos4210PmuState {
401     SysBusDevice parent_obj;
402 
403     MemoryRegion iomem;
404     uint32_t reg[PMU_NUM_OF_REGISTERS];
405 };
406 
exynos4210_pmu_poweroff(void)407 static void exynos4210_pmu_poweroff(void)
408 {
409     PRINT_DEBUG("QEMU PMU: PS_HOLD bit down, powering off\n");
410     qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
411 }
412 
exynos4210_pmu_read(void * opaque,hwaddr offset,unsigned size)413 static uint64_t exynos4210_pmu_read(void *opaque, hwaddr offset,
414                                     unsigned size)
415 {
416     Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
417     const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs;
418     unsigned int i;
419 
420     for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
421         if (reg_p->offset == offset) {
422             PRINT_DEBUG_EXTEND("%s [0x%04x] -> 0x%04x\n", reg_p->name,
423                                    (uint32_t)offset, s->reg[i]);
424             return s->reg[i];
425         }
426         reg_p++;
427     }
428     PRINT_DEBUG("QEMU PMU ERROR: bad read offset 0x%04x\n", (uint32_t)offset);
429     return 0;
430 }
431 
exynos4210_pmu_write(void * opaque,hwaddr offset,uint64_t val,unsigned size)432 static void exynos4210_pmu_write(void *opaque, hwaddr offset,
433                                  uint64_t val, unsigned size)
434 {
435     Exynos4210PmuState *s = (Exynos4210PmuState *)opaque;
436     const Exynos4210PmuReg *reg_p = exynos4210_pmu_regs;
437     unsigned int i;
438 
439     for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
440         if (reg_p->offset == offset) {
441             PRINT_DEBUG_EXTEND("%s <0x%04x> <- 0x%04x\n", reg_p->name,
442                     (uint32_t)offset, (uint32_t)val);
443             s->reg[i] = val;
444             if ((offset == PS_HOLD_CONTROL) && ((val & BIT(8)) == 0)) {
445                 /*
446                  * We are interested only in setting data bit
447                  * of PS_HOLD_CONTROL register to indicate power off request.
448                  */
449                 exynos4210_pmu_poweroff();
450             }
451             return;
452         }
453         reg_p++;
454     }
455     PRINT_DEBUG("QEMU PMU ERROR: bad write offset 0x%04x\n", (uint32_t)offset);
456 }
457 
458 static const MemoryRegionOps exynos4210_pmu_ops = {
459     .read = exynos4210_pmu_read,
460     .write = exynos4210_pmu_write,
461     .endianness = DEVICE_NATIVE_ENDIAN,
462     .valid = {
463         .min_access_size = 4,
464         .max_access_size = 4,
465         .unaligned = false
466     }
467 };
468 
exynos4210_pmu_reset(DeviceState * dev)469 static void exynos4210_pmu_reset(DeviceState *dev)
470 {
471     Exynos4210PmuState *s = EXYNOS4210_PMU(dev);
472     unsigned i;
473 
474     /* Set default values for registers */
475     for (i = 0; i < PMU_NUM_OF_REGISTERS; i++) {
476         s->reg[i] = exynos4210_pmu_regs[i].reset_value;
477     }
478 }
479 
exynos4210_pmu_init(Object * obj)480 static void exynos4210_pmu_init(Object *obj)
481 {
482     Exynos4210PmuState *s = EXYNOS4210_PMU(obj);
483     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
484 
485     /* memory mapping */
486     memory_region_init_io(&s->iomem, obj, &exynos4210_pmu_ops, s,
487                           "exynos4210.pmu", EXYNOS4210_PMU_REGS_MEM_SIZE);
488     sysbus_init_mmio(dev, &s->iomem);
489 }
490 
491 static const VMStateDescription exynos4210_pmu_vmstate = {
492     .name = "exynos4210.pmu",
493     .version_id = 1,
494     .minimum_version_id = 1,
495     .fields = (const VMStateField[]) {
496         VMSTATE_UINT32_ARRAY(reg, Exynos4210PmuState, PMU_NUM_OF_REGISTERS),
497         VMSTATE_END_OF_LIST()
498     }
499 };
500 
exynos4210_pmu_class_init(ObjectClass * klass,void * data)501 static void exynos4210_pmu_class_init(ObjectClass *klass, void *data)
502 {
503     DeviceClass *dc = DEVICE_CLASS(klass);
504 
505     dc->reset = exynos4210_pmu_reset;
506     dc->vmsd = &exynos4210_pmu_vmstate;
507 }
508 
509 static const TypeInfo exynos4210_pmu_info = {
510     .name          = TYPE_EXYNOS4210_PMU,
511     .parent        = TYPE_SYS_BUS_DEVICE,
512     .instance_size = sizeof(Exynos4210PmuState),
513     .instance_init = exynos4210_pmu_init,
514     .class_init    = exynos4210_pmu_class_init,
515 };
516 
exynos4210_pmu_register(void)517 static void exynos4210_pmu_register(void)
518 {
519     type_register_static(&exynos4210_pmu_info);
520 }
521 
522 type_init(exynos4210_pmu_register)
523