1 /* 2 * ASPEED System Control Unit 3 * 4 * Andrew Jeffery <andrew@aj.id.au> 5 * 6 * Copyright 2016 IBM Corp. 7 * 8 * This code is licensed under the GPL version 2 or later. See 9 * the COPYING file in the top-level directory. 10 */ 11 12 #include "qemu/osdep.h" 13 #include "hw/misc/aspeed_scu.h" 14 #include "hw/qdev-properties.h" 15 #include "migration/vmstate.h" 16 #include "qapi/error.h" 17 #include "qapi/visitor.h" 18 #include "qemu/bitops.h" 19 #include "qemu/log.h" 20 #include "qemu/guest-random.h" 21 #include "qemu/module.h" 22 #include "trace.h" 23 24 #define TO_REG(offset) ((offset) >> 2) 25 26 #define PROT_KEY TO_REG(0x00) 27 #define SYS_RST_CTRL TO_REG(0x04) 28 #define CLK_SEL TO_REG(0x08) 29 #define CLK_STOP_CTRL TO_REG(0x0C) 30 #define FREQ_CNTR_CTRL TO_REG(0x10) 31 #define FREQ_CNTR_EVAL TO_REG(0x14) 32 #define IRQ_CTRL TO_REG(0x18) 33 #define D2PLL_PARAM TO_REG(0x1C) 34 #define MPLL_PARAM TO_REG(0x20) 35 #define HPLL_PARAM TO_REG(0x24) 36 #define FREQ_CNTR_RANGE TO_REG(0x28) 37 #define MISC_CTRL1 TO_REG(0x2C) 38 #define PCI_CTRL1 TO_REG(0x30) 39 #define PCI_CTRL2 TO_REG(0x34) 40 #define PCI_CTRL3 TO_REG(0x38) 41 #define SYS_RST_STATUS TO_REG(0x3C) 42 #define SOC_SCRATCH1 TO_REG(0x40) 43 #define SOC_SCRATCH2 TO_REG(0x44) 44 #define MAC_CLK_DELAY TO_REG(0x48) 45 #define MISC_CTRL2 TO_REG(0x4C) 46 #define VGA_SCRATCH1 TO_REG(0x50) 47 #define VGA_SCRATCH2 TO_REG(0x54) 48 #define VGA_SCRATCH3 TO_REG(0x58) 49 #define VGA_SCRATCH4 TO_REG(0x5C) 50 #define VGA_SCRATCH5 TO_REG(0x60) 51 #define VGA_SCRATCH6 TO_REG(0x64) 52 #define VGA_SCRATCH7 TO_REG(0x68) 53 #define VGA_SCRATCH8 TO_REG(0x6C) 54 #define HW_STRAP1 TO_REG(0x70) 55 #define RNG_CTRL TO_REG(0x74) 56 #define RNG_DATA TO_REG(0x78) 57 #define SILICON_REV TO_REG(0x7C) 58 #define PINMUX_CTRL1 TO_REG(0x80) 59 #define PINMUX_CTRL2 TO_REG(0x84) 60 #define PINMUX_CTRL3 TO_REG(0x88) 61 #define PINMUX_CTRL4 TO_REG(0x8C) 62 #define PINMUX_CTRL5 TO_REG(0x90) 63 #define PINMUX_CTRL6 TO_REG(0x94) 64 #define WDT_RST_CTRL TO_REG(0x9C) 65 #define PINMUX_CTRL7 TO_REG(0xA0) 66 #define PINMUX_CTRL8 TO_REG(0xA4) 67 #define PINMUX_CTRL9 TO_REG(0xA8) 68 #define WAKEUP_EN TO_REG(0xC0) 69 #define WAKEUP_CTRL TO_REG(0xC4) 70 #define HW_STRAP2 TO_REG(0xD0) 71 #define FREE_CNTR4 TO_REG(0xE0) 72 #define FREE_CNTR4_EXT TO_REG(0xE4) 73 #define CPU2_CTRL TO_REG(0x100) 74 #define CPU2_BASE_SEG1 TO_REG(0x104) 75 #define CPU2_BASE_SEG2 TO_REG(0x108) 76 #define CPU2_BASE_SEG3 TO_REG(0x10C) 77 #define CPU2_BASE_SEG4 TO_REG(0x110) 78 #define CPU2_BASE_SEG5 TO_REG(0x114) 79 #define CPU2_CACHE_CTRL TO_REG(0x118) 80 #define CHIP_ID0 TO_REG(0x150) 81 #define CHIP_ID1 TO_REG(0x154) 82 #define UART_HPLL_CLK TO_REG(0x160) 83 #define PCIE_CTRL TO_REG(0x180) 84 #define BMC_MMIO_CTRL TO_REG(0x184) 85 #define RELOC_DECODE_BASE1 TO_REG(0x188) 86 #define RELOC_DECODE_BASE2 TO_REG(0x18C) 87 #define MAILBOX_DECODE_BASE TO_REG(0x190) 88 #define SRAM_DECODE_BASE1 TO_REG(0x194) 89 #define SRAM_DECODE_BASE2 TO_REG(0x198) 90 #define BMC_REV TO_REG(0x19C) 91 #define BMC_DEV_ID TO_REG(0x1A4) 92 93 #define AST2600_PROT_KEY TO_REG(0x00) 94 #define AST2600_SILICON_REV TO_REG(0x04) 95 #define AST2600_SILICON_REV2 TO_REG(0x14) 96 #define AST2600_SYS_RST_CTRL TO_REG(0x40) 97 #define AST2600_SYS_RST_CTRL_CLR TO_REG(0x44) 98 #define AST2600_SYS_RST_CTRL2 TO_REG(0x50) 99 #define AST2600_SYS_RST_CTRL2_CLR TO_REG(0x54) 100 #define AST2600_CLK_STOP_CTRL TO_REG(0x80) 101 #define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84) 102 #define AST2600_CLK_STOP_CTRL2 TO_REG(0x90) 103 #define AST2600_CLK_STOP_CTRL2_CLR TO_REG(0x94) 104 #define AST2600_SDRAM_HANDSHAKE TO_REG(0x100) 105 #define AST2600_HPLL_PARAM TO_REG(0x200) 106 #define AST2600_HPLL_EXT TO_REG(0x204) 107 #define AST2600_MPLL_EXT TO_REG(0x224) 108 #define AST2600_EPLL_EXT TO_REG(0x244) 109 #define AST2600_CLK_SEL TO_REG(0x300) 110 #define AST2600_CLK_SEL2 TO_REG(0x304) 111 #define AST2600_CLK_SEL3 TO_REG(0x310) 112 #define AST2600_HW_STRAP1 TO_REG(0x500) 113 #define AST2600_HW_STRAP1_CLR TO_REG(0x504) 114 #define AST2600_HW_STRAP1_PROT TO_REG(0x508) 115 #define AST2600_HW_STRAP2 TO_REG(0x510) 116 #define AST2600_HW_STRAP2_CLR TO_REG(0x514) 117 #define AST2600_HW_STRAP2_PROT TO_REG(0x518) 118 #define AST2600_RNG_CTRL TO_REG(0x524) 119 #define AST2600_RNG_DATA TO_REG(0x540) 120 #define AST2600_CHIP_ID0 TO_REG(0x5B0) 121 #define AST2600_CHIP_ID1 TO_REG(0x5B4) 122 123 #define AST2600_CLK TO_REG(0x40) 124 125 #define SCU_IO_REGION_SIZE 0x1000 126 127 static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = { 128 [SYS_RST_CTRL] = 0xFFCFFEDCU, 129 [CLK_SEL] = 0xF3F40000U, 130 [CLK_STOP_CTRL] = 0x19FC3E8BU, 131 [D2PLL_PARAM] = 0x00026108U, 132 [MPLL_PARAM] = 0x00030291U, 133 [HPLL_PARAM] = 0x00000291U, 134 [MISC_CTRL1] = 0x00000010U, 135 [PCI_CTRL1] = 0x20001A03U, 136 [PCI_CTRL2] = 0x20001A03U, 137 [PCI_CTRL3] = 0x04000030U, 138 [SYS_RST_STATUS] = 0x00000001U, 139 [SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */ 140 [MISC_CTRL2] = 0x00000023U, 141 [RNG_CTRL] = 0x0000000EU, 142 [PINMUX_CTRL2] = 0x0000F000U, 143 [PINMUX_CTRL3] = 0x01000000U, 144 [PINMUX_CTRL4] = 0x000000FFU, 145 [PINMUX_CTRL5] = 0x0000A000U, 146 [WDT_RST_CTRL] = 0x003FFFF3U, 147 [PINMUX_CTRL8] = 0xFFFF0000U, 148 [PINMUX_CTRL9] = 0x000FFFFFU, 149 [FREE_CNTR4] = 0x000000FFU, 150 [FREE_CNTR4_EXT] = 0x000000FFU, 151 [CPU2_BASE_SEG1] = 0x80000000U, 152 [CPU2_BASE_SEG4] = 0x1E600000U, 153 [CPU2_BASE_SEG5] = 0xC0000000U, 154 [UART_HPLL_CLK] = 0x00001903U, 155 [PCIE_CTRL] = 0x0000007BU, 156 [BMC_DEV_ID] = 0x00002402U 157 }; 158 159 /* SCU70 bit 23: 0 24Mhz. bit 11:9: 0b001 AXI:ABH ratio 2:1 */ 160 /* AST2500 revision A1 */ 161 162 static const uint32_t ast2500_a1_resets[ASPEED_SCU_NR_REGS] = { 163 [SYS_RST_CTRL] = 0xFFCFFEDCU, 164 [CLK_SEL] = 0xF3F40000U, 165 [CLK_STOP_CTRL] = 0x19FC3E8BU, 166 [D2PLL_PARAM] = 0x00026108U, 167 [MPLL_PARAM] = 0x00030291U, 168 [HPLL_PARAM] = 0x93000400U, 169 [MISC_CTRL1] = 0x00000010U, 170 [PCI_CTRL1] = 0x20001A03U, 171 [PCI_CTRL2] = 0x20001A03U, 172 [PCI_CTRL3] = 0x04000030U, 173 [SYS_RST_STATUS] = 0x00000001U, 174 [SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */ 175 [MISC_CTRL2] = 0x00000023U, 176 [RNG_CTRL] = 0x0000000EU, 177 [PINMUX_CTRL2] = 0x0000F000U, 178 [PINMUX_CTRL3] = 0x03000000U, 179 [PINMUX_CTRL4] = 0x00000000U, 180 [PINMUX_CTRL5] = 0x0000A000U, 181 [WDT_RST_CTRL] = 0x023FFFF3U, 182 [PINMUX_CTRL8] = 0xFFFF0000U, 183 [PINMUX_CTRL9] = 0x000FFFFFU, 184 [FREE_CNTR4] = 0x000000FFU, 185 [FREE_CNTR4_EXT] = 0x000000FFU, 186 [CPU2_BASE_SEG1] = 0x80000000U, 187 [CPU2_BASE_SEG4] = 0x1E600000U, 188 [CPU2_BASE_SEG5] = 0xC0000000U, 189 [CHIP_ID0] = 0x1234ABCDU, 190 [CHIP_ID1] = 0x88884444U, 191 [UART_HPLL_CLK] = 0x00001903U, 192 [PCIE_CTRL] = 0x0000007BU, 193 [BMC_DEV_ID] = 0x00002402U 194 }; 195 196 static uint32_t aspeed_scu_get_random(void) 197 { 198 uint32_t num; 199 qemu_guest_getrandom_nofail(&num, sizeof(num)); 200 return num; 201 } 202 203 uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s) 204 { 205 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s); 206 uint32_t hpll = asc->calc_hpll(s, s->regs[HPLL_PARAM]); 207 208 return hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[CLK_SEL]) + 1) 209 / asc->apb_divider; 210 } 211 212 static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size) 213 { 214 AspeedSCUState *s = ASPEED_SCU(opaque); 215 int reg = TO_REG(offset); 216 217 if (reg >= ASPEED_SCU_NR_REGS) { 218 qemu_log_mask(LOG_GUEST_ERROR, 219 "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", 220 __func__, offset); 221 return 0; 222 } 223 224 switch (reg) { 225 case RNG_DATA: 226 /* On hardware, RNG_DATA works regardless of 227 * the state of the enable bit in RNG_CTRL 228 */ 229 s->regs[RNG_DATA] = aspeed_scu_get_random(); 230 break; 231 case WAKEUP_EN: 232 qemu_log_mask(LOG_GUEST_ERROR, 233 "%s: Read of write-only offset 0x%" HWADDR_PRIx "\n", 234 __func__, offset); 235 break; 236 } 237 238 return s->regs[reg]; 239 } 240 241 static void aspeed_ast2400_scu_write(void *opaque, hwaddr offset, 242 uint64_t data, unsigned size) 243 { 244 AspeedSCUState *s = ASPEED_SCU(opaque); 245 int reg = TO_REG(offset); 246 247 if (reg >= ASPEED_SCU_NR_REGS) { 248 qemu_log_mask(LOG_GUEST_ERROR, 249 "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", 250 __func__, offset); 251 return; 252 } 253 254 if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 && 255 !s->regs[PROT_KEY]) { 256 qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); 257 } 258 259 trace_aspeed_scu_write(offset, size, data); 260 261 switch (reg) { 262 case PROT_KEY: 263 s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; 264 return; 265 case SILICON_REV: 266 case FREQ_CNTR_EVAL: 267 case VGA_SCRATCH1 ... VGA_SCRATCH8: 268 case RNG_DATA: 269 case FREE_CNTR4: 270 case FREE_CNTR4_EXT: 271 qemu_log_mask(LOG_GUEST_ERROR, 272 "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n", 273 __func__, offset); 274 return; 275 } 276 277 s->regs[reg] = data; 278 } 279 280 static void aspeed_ast2500_scu_write(void *opaque, hwaddr offset, 281 uint64_t data, unsigned size) 282 { 283 AspeedSCUState *s = ASPEED_SCU(opaque); 284 int reg = TO_REG(offset); 285 286 if (reg >= ASPEED_SCU_NR_REGS) { 287 qemu_log_mask(LOG_GUEST_ERROR, 288 "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", 289 __func__, offset); 290 return; 291 } 292 293 if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 && 294 !s->regs[PROT_KEY]) { 295 qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); 296 return; 297 } 298 299 trace_aspeed_scu_write(offset, size, data); 300 301 switch (reg) { 302 case PROT_KEY: 303 s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; 304 return; 305 case HW_STRAP1: 306 s->regs[HW_STRAP1] |= data; 307 return; 308 case SILICON_REV: 309 s->regs[HW_STRAP1] &= ~data; 310 return; 311 case FREQ_CNTR_EVAL: 312 case VGA_SCRATCH1 ... VGA_SCRATCH8: 313 case RNG_DATA: 314 case FREE_CNTR4: 315 case FREE_CNTR4_EXT: 316 case CHIP_ID0: 317 case CHIP_ID1: 318 qemu_log_mask(LOG_GUEST_ERROR, 319 "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n", 320 __func__, offset); 321 return; 322 } 323 324 s->regs[reg] = data; 325 } 326 327 static const MemoryRegionOps aspeed_ast2400_scu_ops = { 328 .read = aspeed_scu_read, 329 .write = aspeed_ast2400_scu_write, 330 .endianness = DEVICE_LITTLE_ENDIAN, 331 .valid = { 332 .min_access_size = 1, 333 .max_access_size = 4, 334 }, 335 }; 336 337 static const MemoryRegionOps aspeed_ast2500_scu_ops = { 338 .read = aspeed_scu_read, 339 .write = aspeed_ast2500_scu_write, 340 .endianness = DEVICE_LITTLE_ENDIAN, 341 .valid.min_access_size = 4, 342 .valid.max_access_size = 4, 343 .valid.unaligned = false, 344 }; 345 346 static uint32_t aspeed_scu_get_clkin(AspeedSCUState *s) 347 { 348 if (s->hw_strap1 & SCU_HW_STRAP_CLK_25M_IN) { 349 return 25000000; 350 } else if (s->hw_strap1 & SCU_HW_STRAP_CLK_48M_IN) { 351 return 48000000; 352 } else { 353 return 24000000; 354 } 355 } 356 357 /* 358 * Strapped frequencies for the AST2400 in MHz. They depend on the 359 * clkin frequency. 360 */ 361 static const uint32_t hpll_ast2400_freqs[][4] = { 362 { 384, 360, 336, 408 }, /* 24MHz or 48MHz */ 363 { 400, 375, 350, 425 }, /* 25MHz */ 364 }; 365 366 static uint32_t aspeed_2400_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg) 367 { 368 uint8_t freq_select; 369 bool clk_25m_in; 370 uint32_t clkin = aspeed_scu_get_clkin(s); 371 372 if (hpll_reg & SCU_AST2400_H_PLL_OFF) { 373 return 0; 374 } 375 376 if (hpll_reg & SCU_AST2400_H_PLL_PROGRAMMED) { 377 uint32_t multiplier = 1; 378 379 if (!(hpll_reg & SCU_AST2400_H_PLL_BYPASS_EN)) { 380 uint32_t n = (hpll_reg >> 5) & 0x3f; 381 uint32_t od = (hpll_reg >> 4) & 0x1; 382 uint32_t d = hpll_reg & 0xf; 383 384 multiplier = (2 - od) * ((n + 2) / (d + 1)); 385 } 386 387 return clkin * multiplier; 388 } 389 390 /* HW strapping */ 391 clk_25m_in = !!(s->hw_strap1 & SCU_HW_STRAP_CLK_25M_IN); 392 freq_select = SCU_AST2400_HW_STRAP_GET_H_PLL_CLK(s->hw_strap1); 393 394 return hpll_ast2400_freqs[clk_25m_in][freq_select] * 1000000; 395 } 396 397 static uint32_t aspeed_2500_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg) 398 { 399 uint32_t multiplier = 1; 400 uint32_t clkin = aspeed_scu_get_clkin(s); 401 402 if (hpll_reg & SCU_H_PLL_OFF) { 403 return 0; 404 } 405 406 if (!(hpll_reg & SCU_H_PLL_BYPASS_EN)) { 407 uint32_t p = (hpll_reg >> 13) & 0x3f; 408 uint32_t m = (hpll_reg >> 5) & 0xff; 409 uint32_t n = hpll_reg & 0x1f; 410 411 multiplier = ((m + 1) / (n + 1)) / (p + 1); 412 } 413 414 return clkin * multiplier; 415 } 416 417 static void aspeed_scu_reset(DeviceState *dev) 418 { 419 AspeedSCUState *s = ASPEED_SCU(dev); 420 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); 421 422 memcpy(s->regs, asc->resets, asc->nr_regs * 4); 423 s->regs[SILICON_REV] = s->silicon_rev; 424 s->regs[HW_STRAP1] = s->hw_strap1; 425 s->regs[HW_STRAP2] = s->hw_strap2; 426 s->regs[PROT_KEY] = s->hw_prot_key; 427 } 428 429 static uint32_t aspeed_silicon_revs[] = { 430 AST2400_A0_SILICON_REV, 431 AST2400_A1_SILICON_REV, 432 AST2500_A0_SILICON_REV, 433 AST2500_A1_SILICON_REV, 434 AST2600_A0_SILICON_REV, 435 AST2600_A1_SILICON_REV, 436 }; 437 438 bool is_supported_silicon_rev(uint32_t silicon_rev) 439 { 440 int i; 441 442 for (i = 0; i < ARRAY_SIZE(aspeed_silicon_revs); i++) { 443 if (silicon_rev == aspeed_silicon_revs[i]) { 444 return true; 445 } 446 } 447 448 return false; 449 } 450 451 static void aspeed_scu_realize(DeviceState *dev, Error **errp) 452 { 453 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 454 AspeedSCUState *s = ASPEED_SCU(dev); 455 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); 456 457 if (!is_supported_silicon_rev(s->silicon_rev)) { 458 error_setg(errp, "Unknown silicon revision: 0x%" PRIx32, 459 s->silicon_rev); 460 return; 461 } 462 463 memory_region_init_io(&s->iomem, OBJECT(s), asc->ops, s, 464 TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE); 465 466 sysbus_init_mmio(sbd, &s->iomem); 467 } 468 469 static const VMStateDescription vmstate_aspeed_scu = { 470 .name = "aspeed.scu", 471 .version_id = 2, 472 .minimum_version_id = 2, 473 .fields = (VMStateField[]) { 474 VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_AST2600_SCU_NR_REGS), 475 VMSTATE_END_OF_LIST() 476 } 477 }; 478 479 static Property aspeed_scu_properties[] = { 480 DEFINE_PROP_UINT32("silicon-rev", AspeedSCUState, silicon_rev, 0), 481 DEFINE_PROP_UINT32("hw-strap1", AspeedSCUState, hw_strap1, 0), 482 DEFINE_PROP_UINT32("hw-strap2", AspeedSCUState, hw_strap2, 0), 483 DEFINE_PROP_UINT32("hw-prot-key", AspeedSCUState, hw_prot_key, 0), 484 DEFINE_PROP_END_OF_LIST(), 485 }; 486 487 static void aspeed_scu_class_init(ObjectClass *klass, void *data) 488 { 489 DeviceClass *dc = DEVICE_CLASS(klass); 490 dc->realize = aspeed_scu_realize; 491 dc->reset = aspeed_scu_reset; 492 dc->desc = "ASPEED System Control Unit"; 493 dc->vmsd = &vmstate_aspeed_scu; 494 device_class_set_props(dc, aspeed_scu_properties); 495 } 496 497 static const TypeInfo aspeed_scu_info = { 498 .name = TYPE_ASPEED_SCU, 499 .parent = TYPE_SYS_BUS_DEVICE, 500 .instance_size = sizeof(AspeedSCUState), 501 .class_init = aspeed_scu_class_init, 502 .class_size = sizeof(AspeedSCUClass), 503 .abstract = true, 504 }; 505 506 static void aspeed_2400_scu_class_init(ObjectClass *klass, void *data) 507 { 508 DeviceClass *dc = DEVICE_CLASS(klass); 509 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 510 511 dc->desc = "ASPEED 2400 System Control Unit"; 512 asc->resets = ast2400_a0_resets; 513 asc->calc_hpll = aspeed_2400_scu_calc_hpll; 514 asc->apb_divider = 2; 515 asc->nr_regs = ASPEED_SCU_NR_REGS; 516 asc->ops = &aspeed_ast2400_scu_ops; 517 } 518 519 static const TypeInfo aspeed_2400_scu_info = { 520 .name = TYPE_ASPEED_2400_SCU, 521 .parent = TYPE_ASPEED_SCU, 522 .instance_size = sizeof(AspeedSCUState), 523 .class_init = aspeed_2400_scu_class_init, 524 }; 525 526 static void aspeed_2500_scu_class_init(ObjectClass *klass, void *data) 527 { 528 DeviceClass *dc = DEVICE_CLASS(klass); 529 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 530 531 dc->desc = "ASPEED 2500 System Control Unit"; 532 asc->resets = ast2500_a1_resets; 533 asc->calc_hpll = aspeed_2500_scu_calc_hpll; 534 asc->apb_divider = 4; 535 asc->nr_regs = ASPEED_SCU_NR_REGS; 536 asc->ops = &aspeed_ast2500_scu_ops; 537 } 538 539 static const TypeInfo aspeed_2500_scu_info = { 540 .name = TYPE_ASPEED_2500_SCU, 541 .parent = TYPE_ASPEED_SCU, 542 .instance_size = sizeof(AspeedSCUState), 543 .class_init = aspeed_2500_scu_class_init, 544 }; 545 546 static uint64_t aspeed_ast2600_scu_read(void *opaque, hwaddr offset, 547 unsigned size) 548 { 549 AspeedSCUState *s = ASPEED_SCU(opaque); 550 int reg = TO_REG(offset); 551 552 if (reg >= ASPEED_AST2600_SCU_NR_REGS) { 553 qemu_log_mask(LOG_GUEST_ERROR, 554 "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", 555 __func__, offset); 556 return 0; 557 } 558 559 switch (reg) { 560 case AST2600_HPLL_EXT: 561 case AST2600_EPLL_EXT: 562 case AST2600_MPLL_EXT: 563 /* PLLs are always "locked" */ 564 return s->regs[reg] | BIT(31); 565 case AST2600_RNG_DATA: 566 /* 567 * On hardware, RNG_DATA works regardless of the state of the 568 * enable bit in RNG_CTRL 569 * 570 * TODO: Check this is true for ast2600 571 */ 572 s->regs[AST2600_RNG_DATA] = aspeed_scu_get_random(); 573 break; 574 } 575 576 return s->regs[reg]; 577 } 578 579 static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, 580 uint64_t data64, unsigned size) 581 { 582 AspeedSCUState *s = ASPEED_SCU(opaque); 583 int reg = TO_REG(offset); 584 /* Truncate here so bitwise operations below behave as expected */ 585 uint32_t data = data64; 586 587 if (reg >= ASPEED_AST2600_SCU_NR_REGS) { 588 qemu_log_mask(LOG_GUEST_ERROR, 589 "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", 590 __func__, offset); 591 return; 592 } 593 594 if (reg > PROT_KEY && !s->regs[PROT_KEY]) { 595 qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); 596 } 597 598 trace_aspeed_scu_write(offset, size, data); 599 600 switch (reg) { 601 case AST2600_PROT_KEY: 602 s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; 603 return; 604 case AST2600_HW_STRAP1: 605 case AST2600_HW_STRAP2: 606 if (s->regs[reg + 2]) { 607 return; 608 } 609 /* fall through */ 610 case AST2600_SYS_RST_CTRL: 611 case AST2600_SYS_RST_CTRL2: 612 case AST2600_CLK_STOP_CTRL: 613 case AST2600_CLK_STOP_CTRL2: 614 /* W1S (Write 1 to set) registers */ 615 s->regs[reg] |= data; 616 return; 617 case AST2600_SYS_RST_CTRL_CLR: 618 case AST2600_SYS_RST_CTRL2_CLR: 619 case AST2600_CLK_STOP_CTRL_CLR: 620 case AST2600_CLK_STOP_CTRL2_CLR: 621 case AST2600_HW_STRAP1_CLR: 622 case AST2600_HW_STRAP2_CLR: 623 /* 624 * W1C (Write 1 to clear) registers are offset by one address from 625 * the data register 626 */ 627 s->regs[reg - 1] &= ~data; 628 return; 629 630 case AST2600_RNG_DATA: 631 case AST2600_SILICON_REV: 632 case AST2600_SILICON_REV2: 633 case AST2600_CHIP_ID0: 634 case AST2600_CHIP_ID1: 635 /* Add read only registers here */ 636 qemu_log_mask(LOG_GUEST_ERROR, 637 "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n", 638 __func__, offset); 639 return; 640 } 641 642 s->regs[reg] = data; 643 } 644 645 static const MemoryRegionOps aspeed_ast2600_scu_ops = { 646 .read = aspeed_ast2600_scu_read, 647 .write = aspeed_ast2600_scu_write, 648 .endianness = DEVICE_LITTLE_ENDIAN, 649 .valid.min_access_size = 4, 650 .valid.max_access_size = 4, 651 .valid.unaligned = false, 652 }; 653 654 static const uint32_t ast2600_a1_resets[ASPEED_AST2600_SCU_NR_REGS] = { 655 [AST2600_SYS_RST_CTRL] = 0xF7C3FED8, 656 [AST2600_SYS_RST_CTRL2] = 0xFFFFFFFC, 657 [AST2600_CLK_STOP_CTRL] = 0xFFFF7F8A, 658 [AST2600_CLK_STOP_CTRL2] = 0xFFF0FFF0, 659 [AST2600_SDRAM_HANDSHAKE] = 0x00000000, 660 [AST2600_HPLL_PARAM] = 0x1000405F, 661 [AST2600_CHIP_ID0] = 0x1234ABCD, 662 [AST2600_CHIP_ID1] = 0x88884444, 663 664 }; 665 666 static void aspeed_ast2600_scu_reset(DeviceState *dev) 667 { 668 AspeedSCUState *s = ASPEED_SCU(dev); 669 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); 670 671 memcpy(s->regs, asc->resets, asc->nr_regs * 4); 672 673 s->regs[AST2600_SILICON_REV] = s->silicon_rev; 674 s->regs[AST2600_SILICON_REV2] = s->silicon_rev; 675 s->regs[AST2600_HW_STRAP1] = s->hw_strap1; 676 s->regs[AST2600_HW_STRAP2] = s->hw_strap2; 677 s->regs[PROT_KEY] = s->hw_prot_key; 678 } 679 680 static void aspeed_2600_scu_class_init(ObjectClass *klass, void *data) 681 { 682 DeviceClass *dc = DEVICE_CLASS(klass); 683 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 684 685 dc->desc = "ASPEED 2600 System Control Unit"; 686 dc->reset = aspeed_ast2600_scu_reset; 687 asc->resets = ast2600_a1_resets; 688 asc->calc_hpll = aspeed_2500_scu_calc_hpll; /* No change since AST2500 */ 689 asc->apb_divider = 4; 690 asc->nr_regs = ASPEED_AST2600_SCU_NR_REGS; 691 asc->ops = &aspeed_ast2600_scu_ops; 692 } 693 694 static const TypeInfo aspeed_2600_scu_info = { 695 .name = TYPE_ASPEED_2600_SCU, 696 .parent = TYPE_ASPEED_SCU, 697 .instance_size = sizeof(AspeedSCUState), 698 .class_init = aspeed_2600_scu_class_init, 699 }; 700 701 static void aspeed_scu_register_types(void) 702 { 703 type_register_static(&aspeed_scu_info); 704 type_register_static(&aspeed_2400_scu_info); 705 type_register_static(&aspeed_2500_scu_info); 706 type_register_static(&aspeed_2600_scu_info); 707 } 708 709 type_init(aspeed_scu_register_types); 710