1 /* 2 * ASPEED System Control Unit 3 * 4 * Andrew Jeffery <andrew@aj.id.au> 5 * 6 * Copyright 2016 IBM Corp. 7 * 8 * This code is licensed under the GPL version 2 or later. See 9 * the COPYING file in the top-level directory. 10 */ 11 12 #include "qemu/osdep.h" 13 #include "hw/misc/aspeed_scu.h" 14 #include "hw/qdev-properties.h" 15 #include "migration/vmstate.h" 16 #include "qapi/error.h" 17 #include "qapi/visitor.h" 18 #include "qemu/bitops.h" 19 #include "qemu/log.h" 20 #include "qemu/guest-random.h" 21 #include "qemu/module.h" 22 #include "trace.h" 23 24 #define TO_REG(offset) ((offset) >> 2) 25 26 #define PROT_KEY TO_REG(0x00) 27 #define SYS_RST_CTRL TO_REG(0x04) 28 #define CLK_SEL TO_REG(0x08) 29 #define CLK_STOP_CTRL TO_REG(0x0C) 30 #define FREQ_CNTR_CTRL TO_REG(0x10) 31 #define FREQ_CNTR_EVAL TO_REG(0x14) 32 #define IRQ_CTRL TO_REG(0x18) 33 #define D2PLL_PARAM TO_REG(0x1C) 34 #define MPLL_PARAM TO_REG(0x20) 35 #define HPLL_PARAM TO_REG(0x24) 36 #define FREQ_CNTR_RANGE TO_REG(0x28) 37 #define MISC_CTRL1 TO_REG(0x2C) 38 #define PCI_CTRL1 TO_REG(0x30) 39 #define PCI_CTRL2 TO_REG(0x34) 40 #define PCI_CTRL3 TO_REG(0x38) 41 #define SYS_RST_STATUS TO_REG(0x3C) 42 #define SOC_SCRATCH1 TO_REG(0x40) 43 #define SOC_SCRATCH2 TO_REG(0x44) 44 #define MAC_CLK_DELAY TO_REG(0x48) 45 #define MISC_CTRL2 TO_REG(0x4C) 46 #define VGA_SCRATCH1 TO_REG(0x50) 47 #define VGA_SCRATCH2 TO_REG(0x54) 48 #define VGA_SCRATCH3 TO_REG(0x58) 49 #define VGA_SCRATCH4 TO_REG(0x5C) 50 #define VGA_SCRATCH5 TO_REG(0x60) 51 #define VGA_SCRATCH6 TO_REG(0x64) 52 #define VGA_SCRATCH7 TO_REG(0x68) 53 #define VGA_SCRATCH8 TO_REG(0x6C) 54 #define HW_STRAP1 TO_REG(0x70) 55 #define RNG_CTRL TO_REG(0x74) 56 #define RNG_DATA TO_REG(0x78) 57 #define SILICON_REV TO_REG(0x7C) 58 #define PINMUX_CTRL1 TO_REG(0x80) 59 #define PINMUX_CTRL2 TO_REG(0x84) 60 #define PINMUX_CTRL3 TO_REG(0x88) 61 #define PINMUX_CTRL4 TO_REG(0x8C) 62 #define PINMUX_CTRL5 TO_REG(0x90) 63 #define PINMUX_CTRL6 TO_REG(0x94) 64 #define WDT_RST_CTRL TO_REG(0x9C) 65 #define PINMUX_CTRL7 TO_REG(0xA0) 66 #define PINMUX_CTRL8 TO_REG(0xA4) 67 #define PINMUX_CTRL9 TO_REG(0xA8) 68 #define WAKEUP_EN TO_REG(0xC0) 69 #define WAKEUP_CTRL TO_REG(0xC4) 70 #define HW_STRAP2 TO_REG(0xD0) 71 #define FREE_CNTR4 TO_REG(0xE0) 72 #define FREE_CNTR4_EXT TO_REG(0xE4) 73 #define CPU2_CTRL TO_REG(0x100) 74 #define CPU2_BASE_SEG1 TO_REG(0x104) 75 #define CPU2_BASE_SEG2 TO_REG(0x108) 76 #define CPU2_BASE_SEG3 TO_REG(0x10C) 77 #define CPU2_BASE_SEG4 TO_REG(0x110) 78 #define CPU2_BASE_SEG5 TO_REG(0x114) 79 #define CPU2_CACHE_CTRL TO_REG(0x118) 80 #define CHIP_ID0 TO_REG(0x150) 81 #define CHIP_ID1 TO_REG(0x154) 82 #define UART_HPLL_CLK TO_REG(0x160) 83 #define PCIE_CTRL TO_REG(0x180) 84 #define BMC_MMIO_CTRL TO_REG(0x184) 85 #define RELOC_DECODE_BASE1 TO_REG(0x188) 86 #define RELOC_DECODE_BASE2 TO_REG(0x18C) 87 #define MAILBOX_DECODE_BASE TO_REG(0x190) 88 #define SRAM_DECODE_BASE1 TO_REG(0x194) 89 #define SRAM_DECODE_BASE2 TO_REG(0x198) 90 #define BMC_REV TO_REG(0x19C) 91 #define BMC_DEV_ID TO_REG(0x1A4) 92 93 #define AST2600_PROT_KEY TO_REG(0x00) 94 #define AST2600_SILICON_REV TO_REG(0x04) 95 #define AST2600_SILICON_REV2 TO_REG(0x14) 96 #define AST2600_SYS_RST_CTRL TO_REG(0x40) 97 #define AST2600_SYS_RST_CTRL_CLR TO_REG(0x44) 98 #define AST2600_SYS_RST_CTRL2 TO_REG(0x50) 99 #define AST2600_SYS_RST_CTRL2_CLR TO_REG(0x54) 100 #define AST2600_CLK_STOP_CTRL TO_REG(0x80) 101 #define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84) 102 #define AST2600_CLK_STOP_CTRL2 TO_REG(0x90) 103 #define AST2600_CLK_STOP_CTRL2_CLR TO_REG(0x94) 104 #define AST2600_DEBUG_CTRL TO_REG(0xC8) 105 #define AST2600_DEBUG_CTRL2 TO_REG(0xD8) 106 #define AST2600_SDRAM_HANDSHAKE TO_REG(0x100) 107 #define AST2600_HPLL_PARAM TO_REG(0x200) 108 #define AST2600_HPLL_EXT TO_REG(0x204) 109 #define AST2600_APLL_PARAM TO_REG(0x210) 110 #define AST2600_APLL_EXT TO_REG(0x214) 111 #define AST2600_MPLL_PARAM TO_REG(0x220) 112 #define AST2600_MPLL_EXT TO_REG(0x224) 113 #define AST2600_EPLL_PARAM TO_REG(0x240) 114 #define AST2600_EPLL_EXT TO_REG(0x244) 115 #define AST2600_DPLL_PARAM TO_REG(0x260) 116 #define AST2600_DPLL_EXT TO_REG(0x264) 117 #define AST2600_CLK_SEL TO_REG(0x300) 118 #define AST2600_CLK_SEL2 TO_REG(0x304) 119 #define AST2600_CLK_SEL3 TO_REG(0x308) 120 #define AST2600_CLK_SEL4 TO_REG(0x310) 121 #define AST2600_CLK_SEL5 TO_REG(0x314) 122 #define AST2600_UARTCLK TO_REG(0x338) 123 #define AST2600_HUARTCLK TO_REG(0x33C) 124 #define AST2600_HW_STRAP1 TO_REG(0x500) 125 #define AST2600_HW_STRAP1_CLR TO_REG(0x504) 126 #define AST2600_HW_STRAP1_PROT TO_REG(0x508) 127 #define AST2600_HW_STRAP2 TO_REG(0x510) 128 #define AST2600_HW_STRAP2_CLR TO_REG(0x514) 129 #define AST2600_HW_STRAP2_PROT TO_REG(0x518) 130 #define AST2600_RNG_CTRL TO_REG(0x524) 131 #define AST2600_RNG_DATA TO_REG(0x540) 132 #define AST2600_CHIP_ID0 TO_REG(0x5B0) 133 #define AST2600_CHIP_ID1 TO_REG(0x5B4) 134 135 #define AST2600_CLK TO_REG(0x40) 136 137 #define AST2700_SILICON_REV TO_REG(0x00) 138 #define AST2700_HW_STRAP1 TO_REG(0x10) 139 #define AST2700_HW_STRAP1_CLR TO_REG(0x14) 140 #define AST2700_HW_STRAP1_LOCK TO_REG(0x20) 141 #define AST2700_HW_STRAP1_SEC1 TO_REG(0x24) 142 #define AST2700_HW_STRAP1_SEC2 TO_REG(0x28) 143 #define AST2700_HW_STRAP1_SEC3 TO_REG(0x2C) 144 145 #define AST2700_SCU_CLK_SEL_1 TO_REG(0x280) 146 #define AST2700_SCU_HPLL_PARAM TO_REG(0x300) 147 #define AST2700_SCU_HPLL_EXT_PARAM TO_REG(0x304) 148 #define AST2700_SCU_DPLL_PARAM TO_REG(0x308) 149 #define AST2700_SCU_DPLL_EXT_PARAM TO_REG(0x30c) 150 #define AST2700_SCU_MPLL_PARAM TO_REG(0x310) 151 #define AST2700_SCU_MPLL_EXT_PARAM TO_REG(0x314) 152 #define AST2700_SCU_D1CLK_PARAM TO_REG(0x320) 153 #define AST2700_SCU_D2CLK_PARAM TO_REG(0x330) 154 #define AST2700_SCU_CRT1CLK_PARAM TO_REG(0x340) 155 #define AST2700_SCU_CRT2CLK_PARAM TO_REG(0x350) 156 #define AST2700_SCU_MPHYCLK_PARAM TO_REG(0x360) 157 #define AST2700_SCU_FREQ_CNTR TO_REG(0x3b0) 158 #define AST2700_SCU_CPU_SCRATCH_0 TO_REG(0x780) 159 #define AST2700_SCU_CPU_SCRATCH_1 TO_REG(0x784) 160 161 #define AST2700_SCUIO_CLK_STOP_CTL_1 TO_REG(0x240) 162 #define AST2700_SCUIO_CLK_STOP_CLR_1 TO_REG(0x244) 163 #define AST2700_SCUIO_CLK_STOP_CTL_2 TO_REG(0x260) 164 #define AST2700_SCUIO_CLK_STOP_CLR_2 TO_REG(0x264) 165 #define AST2700_SCUIO_CLK_SEL_1 TO_REG(0x280) 166 #define AST2700_SCUIO_CLK_SEL_2 TO_REG(0x284) 167 #define AST2700_SCUIO_HPLL_PARAM TO_REG(0x300) 168 #define AST2700_SCUIO_HPLL_EXT_PARAM TO_REG(0x304) 169 #define AST2700_SCUIO_APLL_PARAM TO_REG(0x310) 170 #define AST2700_SCUIO_APLL_EXT_PARAM TO_REG(0x314) 171 #define AST2700_SCUIO_DPLL_PARAM TO_REG(0x320) 172 #define AST2700_SCUIO_DPLL_EXT_PARAM TO_REG(0x324) 173 #define AST2700_SCUIO_DPLL_PARAM_READ TO_REG(0x328) 174 #define AST2700_SCUIO_DPLL_EXT_PARAM_READ TO_REG(0x32c) 175 #define AST2700_SCUIO_UARTCLK_GEN TO_REG(0x330) 176 #define AST2700_SCUIO_HUARTCLK_GEN TO_REG(0x334) 177 #define AST2700_SCUIO_CLK_DUTY_MEAS_RST TO_REG(0x388) 178 179 #define SCU_IO_REGION_SIZE 0x1000 180 181 static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = { 182 [SYS_RST_CTRL] = 0xFFCFFEDCU, 183 [CLK_SEL] = 0xF3F40000U, 184 [CLK_STOP_CTRL] = 0x19FC3E8BU, 185 [D2PLL_PARAM] = 0x00026108U, 186 [MPLL_PARAM] = 0x00030291U, 187 [HPLL_PARAM] = 0x00000291U, 188 [MISC_CTRL1] = 0x00000010U, 189 [PCI_CTRL1] = 0x20001A03U, 190 [PCI_CTRL2] = 0x20001A03U, 191 [PCI_CTRL3] = 0x04000030U, 192 [SYS_RST_STATUS] = 0x00000001U, 193 [SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */ 194 [MISC_CTRL2] = 0x00000023U, 195 [RNG_CTRL] = 0x0000000EU, 196 [PINMUX_CTRL2] = 0x0000F000U, 197 [PINMUX_CTRL3] = 0x01000000U, 198 [PINMUX_CTRL4] = 0x000000FFU, 199 [PINMUX_CTRL5] = 0x0000A000U, 200 [WDT_RST_CTRL] = 0x003FFFF3U, 201 [PINMUX_CTRL8] = 0xFFFF0000U, 202 [PINMUX_CTRL9] = 0x000FFFFFU, 203 [FREE_CNTR4] = 0x000000FFU, 204 [FREE_CNTR4_EXT] = 0x000000FFU, 205 [CPU2_BASE_SEG1] = 0x80000000U, 206 [CPU2_BASE_SEG4] = 0x1E600000U, 207 [CPU2_BASE_SEG5] = 0xC0000000U, 208 [UART_HPLL_CLK] = 0x00001903U, 209 [PCIE_CTRL] = 0x0000007BU, 210 [BMC_DEV_ID] = 0x00002402U 211 }; 212 213 /* SCU70 bit 23: 0 24Mhz. bit 11:9: 0b001 AXI:ABH ratio 2:1 */ 214 /* AST2500 revision A1 */ 215 216 static const uint32_t ast2500_a1_resets[ASPEED_SCU_NR_REGS] = { 217 [SYS_RST_CTRL] = 0xFFCFFEDCU, 218 [CLK_SEL] = 0xF3F40000U, 219 [CLK_STOP_CTRL] = 0x19FC3E8BU, 220 [D2PLL_PARAM] = 0x00026108U, 221 [MPLL_PARAM] = 0x00030291U, 222 [HPLL_PARAM] = 0x93000400U, 223 [MISC_CTRL1] = 0x00000010U, 224 [PCI_CTRL1] = 0x20001A03U, 225 [PCI_CTRL2] = 0x20001A03U, 226 [PCI_CTRL3] = 0x04000030U, 227 [SYS_RST_STATUS] = 0x00000001U, 228 [SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */ 229 [MISC_CTRL2] = 0x00000023U, 230 [RNG_CTRL] = 0x0000000EU, 231 [PINMUX_CTRL2] = 0x0000F000U, 232 [PINMUX_CTRL3] = 0x03000000U, 233 [PINMUX_CTRL4] = 0x00000000U, 234 [PINMUX_CTRL5] = 0x0000A000U, 235 [WDT_RST_CTRL] = 0x023FFFF3U, 236 [PINMUX_CTRL8] = 0xFFFF0000U, 237 [PINMUX_CTRL9] = 0x000FFFFFU, 238 [FREE_CNTR4] = 0x000000FFU, 239 [FREE_CNTR4_EXT] = 0x000000FFU, 240 [CPU2_BASE_SEG1] = 0x80000000U, 241 [CPU2_BASE_SEG4] = 0x1E600000U, 242 [CPU2_BASE_SEG5] = 0xC0000000U, 243 [CHIP_ID0] = 0x1234ABCDU, 244 [CHIP_ID1] = 0x88884444U, 245 [UART_HPLL_CLK] = 0x00001903U, 246 [PCIE_CTRL] = 0x0000007BU, 247 [BMC_DEV_ID] = 0x00002402U 248 }; 249 250 static uint32_t aspeed_scu_get_random(void) 251 { 252 uint32_t num; 253 qemu_guest_getrandom_nofail(&num, sizeof(num)); 254 return num; 255 } 256 257 uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s) 258 { 259 return ASPEED_SCU_GET_CLASS(s)->get_apb(s); 260 } 261 262 static uint32_t aspeed_2400_scu_get_apb_freq(AspeedSCUState *s) 263 { 264 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s); 265 uint32_t hpll = asc->calc_hpll(s, s->regs[HPLL_PARAM]); 266 267 return hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[CLK_SEL]) + 1) 268 / asc->apb_divider; 269 } 270 271 static uint32_t aspeed_2600_scu_get_apb_freq(AspeedSCUState *s) 272 { 273 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s); 274 uint32_t hpll = asc->calc_hpll(s, s->regs[AST2600_HPLL_PARAM]); 275 276 return hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[AST2600_CLK_SEL]) + 1) 277 / asc->apb_divider; 278 } 279 280 static uint32_t aspeed_1030_scu_get_apb_freq(AspeedSCUState *s) 281 { 282 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s); 283 uint32_t hpll = asc->calc_hpll(s, s->regs[AST2600_HPLL_PARAM]); 284 285 return hpll / (SCU_AST1030_CLK_GET_PCLK_DIV(s->regs[AST2600_CLK_SEL4]) + 1) 286 / asc->apb_divider; 287 } 288 289 static uint32_t aspeed_2700_scu_get_apb_freq(AspeedSCUState *s) 290 { 291 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s); 292 uint32_t hpll = asc->calc_hpll(s, s->regs[AST2700_SCU_HPLL_PARAM]); 293 294 return hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[AST2700_SCU_CLK_SEL_1]) + 1) 295 / asc->apb_divider; 296 } 297 298 static uint32_t aspeed_2700_scuio_get_apb_freq(AspeedSCUState *s) 299 { 300 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s); 301 uint32_t hpll = asc->calc_hpll(s, s->regs[AST2700_SCUIO_HPLL_PARAM]); 302 303 return hpll / 304 (SCUIO_AST2700_CLK_GET_PCLK_DIV(s->regs[AST2700_SCUIO_CLK_SEL_1]) + 1) 305 / asc->apb_divider; 306 } 307 308 static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size) 309 { 310 AspeedSCUState *s = ASPEED_SCU(opaque); 311 int reg = TO_REG(offset); 312 313 if (reg >= ASPEED_SCU_NR_REGS) { 314 qemu_log_mask(LOG_GUEST_ERROR, 315 "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", 316 __func__, offset); 317 return 0; 318 } 319 320 switch (reg) { 321 case RNG_DATA: 322 /* 323 * On hardware, RNG_DATA works regardless of 324 * the state of the enable bit in RNG_CTRL 325 */ 326 s->regs[RNG_DATA] = aspeed_scu_get_random(); 327 break; 328 case WAKEUP_EN: 329 qemu_log_mask(LOG_GUEST_ERROR, 330 "%s: Read of write-only offset 0x%" HWADDR_PRIx "\n", 331 __func__, offset); 332 break; 333 } 334 335 trace_aspeed_scu_read(offset, size, s->regs[reg]); 336 return s->regs[reg]; 337 } 338 339 static void aspeed_ast2400_scu_write(void *opaque, hwaddr offset, 340 uint64_t data, unsigned size) 341 { 342 AspeedSCUState *s = ASPEED_SCU(opaque); 343 int reg = TO_REG(offset); 344 345 if (reg >= ASPEED_SCU_NR_REGS) { 346 qemu_log_mask(LOG_GUEST_ERROR, 347 "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", 348 __func__, offset); 349 return; 350 } 351 352 if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 && 353 !s->regs[PROT_KEY]) { 354 qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); 355 } 356 357 trace_aspeed_scu_write(offset, size, data); 358 359 switch (reg) { 360 case PROT_KEY: 361 s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; 362 return; 363 case SILICON_REV: 364 case FREQ_CNTR_EVAL: 365 case VGA_SCRATCH1 ... VGA_SCRATCH8: 366 case RNG_DATA: 367 case FREE_CNTR4: 368 case FREE_CNTR4_EXT: 369 qemu_log_mask(LOG_GUEST_ERROR, 370 "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n", 371 __func__, offset); 372 return; 373 } 374 375 s->regs[reg] = data; 376 } 377 378 static void aspeed_ast2500_scu_write(void *opaque, hwaddr offset, 379 uint64_t data, unsigned size) 380 { 381 AspeedSCUState *s = ASPEED_SCU(opaque); 382 int reg = TO_REG(offset); 383 384 if (reg >= ASPEED_SCU_NR_REGS) { 385 qemu_log_mask(LOG_GUEST_ERROR, 386 "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", 387 __func__, offset); 388 return; 389 } 390 391 if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 && 392 !s->regs[PROT_KEY]) { 393 qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); 394 return; 395 } 396 397 trace_aspeed_scu_write(offset, size, data); 398 399 switch (reg) { 400 case PROT_KEY: 401 s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; 402 return; 403 case HW_STRAP1: 404 s->regs[HW_STRAP1] |= data; 405 return; 406 case SILICON_REV: 407 s->regs[HW_STRAP1] &= ~data; 408 return; 409 case FREQ_CNTR_EVAL: 410 case VGA_SCRATCH1 ... VGA_SCRATCH8: 411 case RNG_DATA: 412 case FREE_CNTR4: 413 case FREE_CNTR4_EXT: 414 case CHIP_ID0: 415 case CHIP_ID1: 416 qemu_log_mask(LOG_GUEST_ERROR, 417 "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n", 418 __func__, offset); 419 return; 420 } 421 422 s->regs[reg] = data; 423 } 424 425 static const MemoryRegionOps aspeed_ast2400_scu_ops = { 426 .read = aspeed_scu_read, 427 .write = aspeed_ast2400_scu_write, 428 .endianness = DEVICE_LITTLE_ENDIAN, 429 .valid = { 430 .min_access_size = 1, 431 .max_access_size = 4, 432 }, 433 }; 434 435 static const MemoryRegionOps aspeed_ast2500_scu_ops = { 436 .read = aspeed_scu_read, 437 .write = aspeed_ast2500_scu_write, 438 .endianness = DEVICE_LITTLE_ENDIAN, 439 .valid.min_access_size = 4, 440 .valid.max_access_size = 4, 441 .valid.unaligned = false, 442 }; 443 444 static uint32_t aspeed_scu_get_clkin(AspeedSCUState *s) 445 { 446 if (s->hw_strap1 & SCU_HW_STRAP_CLK_25M_IN || 447 ASPEED_SCU_GET_CLASS(s)->clkin_25Mhz) { 448 return 25000000; 449 } else if (s->hw_strap1 & SCU_HW_STRAP_CLK_48M_IN) { 450 return 48000000; 451 } else { 452 return 24000000; 453 } 454 } 455 456 /* 457 * Strapped frequencies for the AST2400 in MHz. They depend on the 458 * clkin frequency. 459 */ 460 static const uint32_t hpll_ast2400_freqs[][4] = { 461 { 384, 360, 336, 408 }, /* 24MHz or 48MHz */ 462 { 400, 375, 350, 425 }, /* 25MHz */ 463 }; 464 465 static uint32_t aspeed_2400_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg) 466 { 467 uint8_t freq_select; 468 bool clk_25m_in; 469 uint32_t clkin = aspeed_scu_get_clkin(s); 470 471 if (hpll_reg & SCU_AST2400_H_PLL_OFF) { 472 return 0; 473 } 474 475 if (hpll_reg & SCU_AST2400_H_PLL_PROGRAMMED) { 476 uint32_t multiplier = 1; 477 478 if (!(hpll_reg & SCU_AST2400_H_PLL_BYPASS_EN)) { 479 uint32_t n = (hpll_reg >> 5) & 0x3f; 480 uint32_t od = (hpll_reg >> 4) & 0x1; 481 uint32_t d = hpll_reg & 0xf; 482 483 multiplier = (2 - od) * ((n + 2) / (d + 1)); 484 } 485 486 return clkin * multiplier; 487 } 488 489 /* HW strapping */ 490 clk_25m_in = !!(s->hw_strap1 & SCU_HW_STRAP_CLK_25M_IN); 491 freq_select = SCU_AST2400_HW_STRAP_GET_H_PLL_CLK(s->hw_strap1); 492 493 return hpll_ast2400_freqs[clk_25m_in][freq_select] * 1000000; 494 } 495 496 static uint32_t aspeed_2500_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg) 497 { 498 uint32_t multiplier = 1; 499 uint32_t clkin = aspeed_scu_get_clkin(s); 500 501 if (hpll_reg & SCU_H_PLL_OFF) { 502 return 0; 503 } 504 505 if (!(hpll_reg & SCU_H_PLL_BYPASS_EN)) { 506 uint32_t p = (hpll_reg >> 13) & 0x3f; 507 uint32_t m = (hpll_reg >> 5) & 0xff; 508 uint32_t n = hpll_reg & 0x1f; 509 510 multiplier = ((m + 1) / (n + 1)) / (p + 1); 511 } 512 513 return clkin * multiplier; 514 } 515 516 static uint32_t aspeed_2600_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg) 517 { 518 uint32_t multiplier = 1; 519 uint32_t clkin = aspeed_scu_get_clkin(s); 520 521 if (hpll_reg & SCU_AST2600_H_PLL_OFF) { 522 return 0; 523 } 524 525 if (!(hpll_reg & SCU_AST2600_H_PLL_BYPASS_EN)) { 526 uint32_t p = (hpll_reg >> 19) & 0xf; 527 uint32_t n = (hpll_reg >> 13) & 0x3f; 528 uint32_t m = hpll_reg & 0x1fff; 529 530 multiplier = ((m + 1) / (n + 1)) / (p + 1); 531 } 532 533 return clkin * multiplier; 534 } 535 536 static void aspeed_scu_reset(DeviceState *dev) 537 { 538 AspeedSCUState *s = ASPEED_SCU(dev); 539 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); 540 541 memcpy(s->regs, asc->resets, asc->nr_regs * 4); 542 s->regs[SILICON_REV] = s->silicon_rev; 543 s->regs[HW_STRAP1] = s->hw_strap1; 544 s->regs[HW_STRAP2] = s->hw_strap2; 545 s->regs[PROT_KEY] = s->hw_prot_key; 546 } 547 548 static uint32_t aspeed_silicon_revs[] = { 549 AST2400_A0_SILICON_REV, 550 AST2400_A1_SILICON_REV, 551 AST2500_A0_SILICON_REV, 552 AST2500_A1_SILICON_REV, 553 AST2600_A0_SILICON_REV, 554 AST2600_A1_SILICON_REV, 555 AST2600_A2_SILICON_REV, 556 AST2600_A3_SILICON_REV, 557 AST1030_A0_SILICON_REV, 558 AST1030_A1_SILICON_REV, 559 AST2700_A0_SILICON_REV, 560 AST2720_A0_SILICON_REV, 561 AST2750_A0_SILICON_REV, 562 }; 563 564 bool is_supported_silicon_rev(uint32_t silicon_rev) 565 { 566 int i; 567 568 for (i = 0; i < ARRAY_SIZE(aspeed_silicon_revs); i++) { 569 if (silicon_rev == aspeed_silicon_revs[i]) { 570 return true; 571 } 572 } 573 574 return false; 575 } 576 577 static void aspeed_scu_realize(DeviceState *dev, Error **errp) 578 { 579 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 580 AspeedSCUState *s = ASPEED_SCU(dev); 581 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); 582 583 if (!is_supported_silicon_rev(s->silicon_rev)) { 584 error_setg(errp, "Unknown silicon revision: 0x%" PRIx32, 585 s->silicon_rev); 586 return; 587 } 588 589 memory_region_init_io(&s->iomem, OBJECT(s), asc->ops, s, 590 TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE); 591 592 sysbus_init_mmio(sbd, &s->iomem); 593 } 594 595 static const VMStateDescription vmstate_aspeed_scu = { 596 .name = "aspeed.scu", 597 .version_id = 2, 598 .minimum_version_id = 2, 599 .fields = (const VMStateField[]) { 600 VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_AST2600_SCU_NR_REGS), 601 VMSTATE_END_OF_LIST() 602 } 603 }; 604 605 static Property aspeed_scu_properties[] = { 606 DEFINE_PROP_UINT32("silicon-rev", AspeedSCUState, silicon_rev, 0), 607 DEFINE_PROP_UINT32("hw-strap1", AspeedSCUState, hw_strap1, 0), 608 DEFINE_PROP_UINT32("hw-strap2", AspeedSCUState, hw_strap2, 0), 609 DEFINE_PROP_UINT32("hw-prot-key", AspeedSCUState, hw_prot_key, 0), 610 DEFINE_PROP_END_OF_LIST(), 611 }; 612 613 static void aspeed_scu_class_init(ObjectClass *klass, void *data) 614 { 615 DeviceClass *dc = DEVICE_CLASS(klass); 616 dc->realize = aspeed_scu_realize; 617 dc->reset = aspeed_scu_reset; 618 dc->desc = "ASPEED System Control Unit"; 619 dc->vmsd = &vmstate_aspeed_scu; 620 device_class_set_props(dc, aspeed_scu_properties); 621 } 622 623 static const TypeInfo aspeed_scu_info = { 624 .name = TYPE_ASPEED_SCU, 625 .parent = TYPE_SYS_BUS_DEVICE, 626 .instance_size = sizeof(AspeedSCUState), 627 .class_init = aspeed_scu_class_init, 628 .class_size = sizeof(AspeedSCUClass), 629 .abstract = true, 630 }; 631 632 static void aspeed_2400_scu_class_init(ObjectClass *klass, void *data) 633 { 634 DeviceClass *dc = DEVICE_CLASS(klass); 635 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 636 637 dc->desc = "ASPEED 2400 System Control Unit"; 638 asc->resets = ast2400_a0_resets; 639 asc->calc_hpll = aspeed_2400_scu_calc_hpll; 640 asc->get_apb = aspeed_2400_scu_get_apb_freq; 641 asc->apb_divider = 2; 642 asc->nr_regs = ASPEED_SCU_NR_REGS; 643 asc->clkin_25Mhz = false; 644 asc->ops = &aspeed_ast2400_scu_ops; 645 } 646 647 static const TypeInfo aspeed_2400_scu_info = { 648 .name = TYPE_ASPEED_2400_SCU, 649 .parent = TYPE_ASPEED_SCU, 650 .instance_size = sizeof(AspeedSCUState), 651 .class_init = aspeed_2400_scu_class_init, 652 }; 653 654 static void aspeed_2500_scu_class_init(ObjectClass *klass, void *data) 655 { 656 DeviceClass *dc = DEVICE_CLASS(klass); 657 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 658 659 dc->desc = "ASPEED 2500 System Control Unit"; 660 asc->resets = ast2500_a1_resets; 661 asc->calc_hpll = aspeed_2500_scu_calc_hpll; 662 asc->get_apb = aspeed_2400_scu_get_apb_freq; 663 asc->apb_divider = 4; 664 asc->nr_regs = ASPEED_SCU_NR_REGS; 665 asc->clkin_25Mhz = false; 666 asc->ops = &aspeed_ast2500_scu_ops; 667 } 668 669 static const TypeInfo aspeed_2500_scu_info = { 670 .name = TYPE_ASPEED_2500_SCU, 671 .parent = TYPE_ASPEED_SCU, 672 .instance_size = sizeof(AspeedSCUState), 673 .class_init = aspeed_2500_scu_class_init, 674 }; 675 676 static uint64_t aspeed_ast2600_scu_read(void *opaque, hwaddr offset, 677 unsigned size) 678 { 679 AspeedSCUState *s = ASPEED_SCU(opaque); 680 int reg = TO_REG(offset); 681 682 if (reg >= ASPEED_AST2600_SCU_NR_REGS) { 683 qemu_log_mask(LOG_GUEST_ERROR, 684 "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", 685 __func__, offset); 686 return 0; 687 } 688 689 switch (reg) { 690 case AST2600_HPLL_EXT: 691 case AST2600_EPLL_EXT: 692 case AST2600_MPLL_EXT: 693 /* PLLs are always "locked" */ 694 return s->regs[reg] | BIT(31); 695 case AST2600_RNG_DATA: 696 /* 697 * On hardware, RNG_DATA works regardless of the state of the 698 * enable bit in RNG_CTRL 699 * 700 * TODO: Check this is true for ast2600 701 */ 702 s->regs[AST2600_RNG_DATA] = aspeed_scu_get_random(); 703 break; 704 } 705 706 trace_aspeed_scu_read(offset, size, s->regs[reg]); 707 return s->regs[reg]; 708 } 709 710 static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, 711 uint64_t data64, unsigned size) 712 { 713 AspeedSCUState *s = ASPEED_SCU(opaque); 714 int reg = TO_REG(offset); 715 /* Truncate here so bitwise operations below behave as expected */ 716 uint32_t data = data64; 717 718 if (reg >= ASPEED_AST2600_SCU_NR_REGS) { 719 qemu_log_mask(LOG_GUEST_ERROR, 720 "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", 721 __func__, offset); 722 return; 723 } 724 725 if (reg > PROT_KEY && !s->regs[PROT_KEY]) { 726 qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__); 727 } 728 729 trace_aspeed_scu_write(offset, size, data); 730 731 switch (reg) { 732 case AST2600_PROT_KEY: 733 s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0; 734 return; 735 case AST2600_HW_STRAP1: 736 case AST2600_HW_STRAP2: 737 if (s->regs[reg + 2]) { 738 return; 739 } 740 /* fall through */ 741 case AST2600_SYS_RST_CTRL: 742 case AST2600_SYS_RST_CTRL2: 743 case AST2600_CLK_STOP_CTRL: 744 case AST2600_CLK_STOP_CTRL2: 745 /* W1S (Write 1 to set) registers */ 746 s->regs[reg] |= data; 747 return; 748 case AST2600_SYS_RST_CTRL_CLR: 749 case AST2600_SYS_RST_CTRL2_CLR: 750 case AST2600_CLK_STOP_CTRL_CLR: 751 case AST2600_CLK_STOP_CTRL2_CLR: 752 case AST2600_HW_STRAP1_CLR: 753 case AST2600_HW_STRAP2_CLR: 754 /* 755 * W1C (Write 1 to clear) registers are offset by one address from 756 * the data register 757 */ 758 s->regs[reg - 1] &= ~data; 759 return; 760 761 case AST2600_RNG_DATA: 762 case AST2600_SILICON_REV: 763 case AST2600_SILICON_REV2: 764 case AST2600_CHIP_ID0: 765 case AST2600_CHIP_ID1: 766 /* Add read only registers here */ 767 qemu_log_mask(LOG_GUEST_ERROR, 768 "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n", 769 __func__, offset); 770 return; 771 } 772 773 s->regs[reg] = data; 774 } 775 776 static const MemoryRegionOps aspeed_ast2600_scu_ops = { 777 .read = aspeed_ast2600_scu_read, 778 .write = aspeed_ast2600_scu_write, 779 .endianness = DEVICE_LITTLE_ENDIAN, 780 .valid.min_access_size = 4, 781 .valid.max_access_size = 4, 782 .valid.unaligned = false, 783 }; 784 785 static const uint32_t ast2600_a3_resets[ASPEED_AST2600_SCU_NR_REGS] = { 786 [AST2600_SYS_RST_CTRL] = 0xF7C3FED8, 787 [AST2600_SYS_RST_CTRL2] = 0x0DFFFFFC, 788 [AST2600_CLK_STOP_CTRL] = 0xFFFF7F8A, 789 [AST2600_CLK_STOP_CTRL2] = 0xFFF0FFF0, 790 [AST2600_DEBUG_CTRL] = 0x00000FFF, 791 [AST2600_DEBUG_CTRL2] = 0x000000FF, 792 [AST2600_SDRAM_HANDSHAKE] = 0x00000000, 793 [AST2600_HPLL_PARAM] = 0x1000408F, 794 [AST2600_APLL_PARAM] = 0x1000405F, 795 [AST2600_MPLL_PARAM] = 0x1008405F, 796 [AST2600_EPLL_PARAM] = 0x1004077F, 797 [AST2600_DPLL_PARAM] = 0x1078405F, 798 [AST2600_CLK_SEL] = 0xF3940000, 799 [AST2600_CLK_SEL2] = 0x00700000, 800 [AST2600_CLK_SEL3] = 0x00000000, 801 [AST2600_CLK_SEL4] = 0xF3F40000, 802 [AST2600_CLK_SEL5] = 0x30000000, 803 [AST2600_UARTCLK] = 0x00014506, 804 [AST2600_HUARTCLK] = 0x000145C0, 805 [AST2600_CHIP_ID0] = 0x1234ABCD, 806 [AST2600_CHIP_ID1] = 0x88884444, 807 }; 808 809 static void aspeed_ast2600_scu_reset(DeviceState *dev) 810 { 811 AspeedSCUState *s = ASPEED_SCU(dev); 812 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); 813 814 memcpy(s->regs, asc->resets, asc->nr_regs * 4); 815 816 /* 817 * A0 reports A0 in _REV, but subsequent revisions report A1 regardless 818 * of actual revision. QEMU and Linux only support A1 onwards so this is 819 * sufficient. 820 */ 821 s->regs[AST2600_SILICON_REV] = AST2600_A3_SILICON_REV; 822 s->regs[AST2600_SILICON_REV2] = s->silicon_rev; 823 s->regs[AST2600_HW_STRAP1] = s->hw_strap1; 824 s->regs[AST2600_HW_STRAP2] = s->hw_strap2; 825 s->regs[PROT_KEY] = s->hw_prot_key; 826 } 827 828 static void aspeed_2600_scu_class_init(ObjectClass *klass, void *data) 829 { 830 DeviceClass *dc = DEVICE_CLASS(klass); 831 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 832 833 dc->desc = "ASPEED 2600 System Control Unit"; 834 dc->reset = aspeed_ast2600_scu_reset; 835 asc->resets = ast2600_a3_resets; 836 asc->calc_hpll = aspeed_2600_scu_calc_hpll; 837 asc->get_apb = aspeed_2600_scu_get_apb_freq; 838 asc->apb_divider = 4; 839 asc->nr_regs = ASPEED_AST2600_SCU_NR_REGS; 840 asc->clkin_25Mhz = true; 841 asc->ops = &aspeed_ast2600_scu_ops; 842 } 843 844 static const TypeInfo aspeed_2600_scu_info = { 845 .name = TYPE_ASPEED_2600_SCU, 846 .parent = TYPE_ASPEED_SCU, 847 .instance_size = sizeof(AspeedSCUState), 848 .class_init = aspeed_2600_scu_class_init, 849 }; 850 851 static uint64_t aspeed_ast2700_scu_read(void *opaque, hwaddr offset, 852 unsigned size) 853 { 854 AspeedSCUState *s = ASPEED_SCU(opaque); 855 int reg = TO_REG(offset); 856 857 if (reg >= ASPEED_AST2700_SCU_NR_REGS) { 858 qemu_log_mask(LOG_GUEST_ERROR, 859 "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", 860 __func__, offset); 861 return 0; 862 } 863 864 switch (reg) { 865 default: 866 qemu_log_mask(LOG_GUEST_ERROR, 867 "%s: Unhandled read at offset 0x%" HWADDR_PRIx "\n", 868 __func__, offset); 869 } 870 871 trace_aspeed_ast2700_scu_read(offset, size, s->regs[reg]); 872 return s->regs[reg]; 873 } 874 875 static void aspeed_ast2700_scu_write(void *opaque, hwaddr offset, 876 uint64_t data64, unsigned size) 877 { 878 AspeedSCUState *s = ASPEED_SCU(opaque); 879 int reg = TO_REG(offset); 880 /* Truncate here so bitwise operations below behave as expected */ 881 uint32_t data = data64; 882 883 if (reg >= ASPEED_AST2700_SCU_NR_REGS) { 884 qemu_log_mask(LOG_GUEST_ERROR, 885 "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", 886 __func__, offset); 887 return; 888 } 889 890 trace_aspeed_ast2700_scu_write(offset, size, data); 891 892 switch (reg) { 893 default: 894 qemu_log_mask(LOG_GUEST_ERROR, 895 "%s: Unhandled write at offset 0x%" HWADDR_PRIx "\n", 896 __func__, offset); 897 break; 898 } 899 900 s->regs[reg] = data; 901 } 902 903 static const MemoryRegionOps aspeed_ast2700_scu_ops = { 904 .read = aspeed_ast2700_scu_read, 905 .write = aspeed_ast2700_scu_write, 906 .endianness = DEVICE_LITTLE_ENDIAN, 907 .valid.min_access_size = 1, 908 .valid.max_access_size = 8, 909 .valid.unaligned = false, 910 }; 911 912 static const uint32_t ast2700_a0_resets[ASPEED_AST2700_SCU_NR_REGS] = { 913 [AST2700_SILICON_REV] = AST2700_A0_SILICON_REV, 914 [AST2700_HW_STRAP1] = 0x00000800, 915 [AST2700_HW_STRAP1_CLR] = 0xFFF0FFF0, 916 [AST2700_HW_STRAP1_LOCK] = 0x00000FFF, 917 [AST2700_HW_STRAP1_SEC1] = 0x000000FF, 918 [AST2700_HW_STRAP1_SEC2] = 0x00000000, 919 [AST2700_HW_STRAP1_SEC3] = 0x1000408F, 920 [AST2700_SCU_HPLL_PARAM] = 0x0000009f, 921 [AST2700_SCU_HPLL_EXT_PARAM] = 0x8000004f, 922 [AST2700_SCU_DPLL_PARAM] = 0x0080009f, 923 [AST2700_SCU_DPLL_EXT_PARAM] = 0x8000004f, 924 [AST2700_SCU_MPLL_PARAM] = 0x00000040, 925 [AST2700_SCU_MPLL_EXT_PARAM] = 0x80000000, 926 [AST2700_SCU_D1CLK_PARAM] = 0x00050002, 927 [AST2700_SCU_D2CLK_PARAM] = 0x00050002, 928 [AST2700_SCU_CRT1CLK_PARAM] = 0x00050002, 929 [AST2700_SCU_CRT2CLK_PARAM] = 0x00050002, 930 [AST2700_SCU_MPHYCLK_PARAM] = 0x0000004c, 931 [AST2700_SCU_FREQ_CNTR] = 0x000375eb, 932 [AST2700_SCU_CPU_SCRATCH_0] = 0x00000000, 933 [AST2700_SCU_CPU_SCRATCH_1] = 0x00000004, 934 }; 935 936 static void aspeed_ast2700_scu_reset(DeviceState *dev) 937 { 938 AspeedSCUState *s = ASPEED_SCU(dev); 939 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); 940 941 memcpy(s->regs, asc->resets, asc->nr_regs * 4); 942 } 943 944 static void aspeed_2700_scu_class_init(ObjectClass *klass, void *data) 945 { 946 DeviceClass *dc = DEVICE_CLASS(klass); 947 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 948 949 dc->desc = "ASPEED 2700 System Control Unit"; 950 dc->reset = aspeed_ast2700_scu_reset; 951 asc->resets = ast2700_a0_resets; 952 asc->calc_hpll = aspeed_2600_scu_calc_hpll; 953 asc->get_apb = aspeed_2700_scu_get_apb_freq; 954 asc->apb_divider = 4; 955 asc->nr_regs = ASPEED_AST2700_SCU_NR_REGS; 956 asc->clkin_25Mhz = true; 957 asc->ops = &aspeed_ast2700_scu_ops; 958 } 959 960 static uint64_t aspeed_ast2700_scuio_read(void *opaque, hwaddr offset, 961 unsigned size) 962 { 963 AspeedSCUState *s = ASPEED_SCU(opaque); 964 int reg = TO_REG(offset); 965 if (reg >= ASPEED_AST2700_SCU_NR_REGS) { 966 qemu_log_mask(LOG_GUEST_ERROR, 967 "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", 968 __func__, offset); 969 return 0; 970 } 971 972 switch (reg) { 973 default: 974 qemu_log_mask(LOG_GUEST_ERROR, 975 "%s: Unhandled read at offset 0x%" HWADDR_PRIx "\n", 976 __func__, offset); 977 } 978 979 trace_aspeed_ast2700_scuio_read(offset, size, s->regs[reg]); 980 return s->regs[reg]; 981 } 982 983 static void aspeed_ast2700_scuio_write(void *opaque, hwaddr offset, 984 uint64_t data64, unsigned size) 985 { 986 AspeedSCUState *s = ASPEED_SCU(opaque); 987 int reg = TO_REG(offset); 988 /* Truncate here so bitwise operations below behave as expected */ 989 uint32_t data = data64; 990 bool updated = false; 991 992 if (reg >= ASPEED_AST2700_SCU_NR_REGS) { 993 qemu_log_mask(LOG_GUEST_ERROR, 994 "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", 995 __func__, offset); 996 return; 997 } 998 999 trace_aspeed_ast2700_scuio_write(offset, size, data); 1000 1001 switch (reg) { 1002 case AST2700_SCUIO_CLK_STOP_CTL_1: 1003 case AST2700_SCUIO_CLK_STOP_CTL_2: 1004 s->regs[reg] |= data; 1005 updated = true; 1006 break; 1007 case AST2700_SCUIO_CLK_STOP_CLR_1: 1008 case AST2700_SCUIO_CLK_STOP_CLR_2: 1009 s->regs[reg - 1] ^= data; 1010 updated = true; 1011 break; 1012 default: 1013 qemu_log_mask(LOG_GUEST_ERROR, 1014 "%s: Unhandled write at offset 0x%" HWADDR_PRIx "\n", 1015 __func__, offset); 1016 break; 1017 } 1018 1019 if (!updated) { 1020 s->regs[reg] = data; 1021 } 1022 } 1023 1024 static const MemoryRegionOps aspeed_ast2700_scuio_ops = { 1025 .read = aspeed_ast2700_scuio_read, 1026 .write = aspeed_ast2700_scuio_write, 1027 .endianness = DEVICE_LITTLE_ENDIAN, 1028 .valid.min_access_size = 1, 1029 .valid.max_access_size = 8, 1030 .valid.unaligned = false, 1031 }; 1032 1033 static const uint32_t ast2700_a0_resets_io[ASPEED_AST2700_SCU_NR_REGS] = { 1034 [AST2700_SILICON_REV] = 0x06000003, 1035 [AST2700_HW_STRAP1] = 0x00000504, 1036 [AST2700_HW_STRAP1_CLR] = 0xFFF0FFF0, 1037 [AST2700_HW_STRAP1_LOCK] = 0x00000FFF, 1038 [AST2700_HW_STRAP1_SEC1] = 0x000000FF, 1039 [AST2700_HW_STRAP1_SEC2] = 0x00000000, 1040 [AST2700_HW_STRAP1_SEC3] = 0x1000408F, 1041 [AST2700_SCUIO_CLK_STOP_CTL_1] = 0xffff8400, 1042 [AST2700_SCUIO_CLK_STOP_CTL_2] = 0x00005f30, 1043 [AST2700_SCUIO_CLK_SEL_1] = 0x86900000, 1044 [AST2700_SCUIO_CLK_SEL_2] = 0x00400000, 1045 [AST2700_SCUIO_HPLL_PARAM] = 0x10000027, 1046 [AST2700_SCUIO_HPLL_EXT_PARAM] = 0x80000014, 1047 [AST2700_SCUIO_APLL_PARAM] = 0x1000001f, 1048 [AST2700_SCUIO_APLL_EXT_PARAM] = 0x8000000f, 1049 [AST2700_SCUIO_DPLL_PARAM] = 0x106e42ce, 1050 [AST2700_SCUIO_DPLL_EXT_PARAM] = 0x80000167, 1051 [AST2700_SCUIO_DPLL_PARAM_READ] = 0x106e42ce, 1052 [AST2700_SCUIO_DPLL_EXT_PARAM_READ] = 0x80000167, 1053 [AST2700_SCUIO_UARTCLK_GEN] = 0x00014506, 1054 [AST2700_SCUIO_HUARTCLK_GEN] = 0x000145c0, 1055 [AST2700_SCUIO_CLK_DUTY_MEAS_RST] = 0x0c9100d2, 1056 }; 1057 1058 static void aspeed_2700_scuio_class_init(ObjectClass *klass, void *data) 1059 { 1060 DeviceClass *dc = DEVICE_CLASS(klass); 1061 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 1062 1063 dc->desc = "ASPEED 2700 System Control Unit I/O"; 1064 dc->reset = aspeed_ast2700_scu_reset; 1065 asc->resets = ast2700_a0_resets_io; 1066 asc->calc_hpll = aspeed_2600_scu_calc_hpll; 1067 asc->get_apb = aspeed_2700_scuio_get_apb_freq; 1068 asc->apb_divider = 2; 1069 asc->nr_regs = ASPEED_AST2700_SCU_NR_REGS; 1070 asc->clkin_25Mhz = true; 1071 asc->ops = &aspeed_ast2700_scuio_ops; 1072 } 1073 1074 static const TypeInfo aspeed_2700_scu_info = { 1075 .name = TYPE_ASPEED_2700_SCU, 1076 .parent = TYPE_ASPEED_SCU, 1077 .instance_size = sizeof(AspeedSCUState), 1078 .class_init = aspeed_2700_scu_class_init, 1079 }; 1080 1081 static const TypeInfo aspeed_2700_scuio_info = { 1082 .name = TYPE_ASPEED_2700_SCUIO, 1083 .parent = TYPE_ASPEED_SCU, 1084 .instance_size = sizeof(AspeedSCUState), 1085 .class_init = aspeed_2700_scuio_class_init, 1086 }; 1087 1088 static const uint32_t ast1030_a1_resets[ASPEED_AST2600_SCU_NR_REGS] = { 1089 [AST2600_SYS_RST_CTRL] = 0xFFC3FED8, 1090 [AST2600_SYS_RST_CTRL2] = 0x09FFFFFC, 1091 [AST2600_CLK_STOP_CTRL] = 0xFFFF7F8A, 1092 [AST2600_CLK_STOP_CTRL2] = 0xFFF0FFF0, 1093 [AST2600_DEBUG_CTRL2] = 0x00000000, 1094 [AST2600_HPLL_PARAM] = 0x10004077, 1095 [AST2600_HPLL_EXT] = 0x00000031, 1096 [AST2600_CLK_SEL4] = 0x43F90900, 1097 [AST2600_CLK_SEL5] = 0x40000000, 1098 [AST2600_CHIP_ID0] = 0xDEADBEEF, 1099 [AST2600_CHIP_ID1] = 0x0BADCAFE, 1100 }; 1101 1102 static void aspeed_ast1030_scu_reset(DeviceState *dev) 1103 { 1104 AspeedSCUState *s = ASPEED_SCU(dev); 1105 AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev); 1106 1107 memcpy(s->regs, asc->resets, asc->nr_regs * 4); 1108 1109 s->regs[AST2600_SILICON_REV] = AST1030_A1_SILICON_REV; 1110 s->regs[AST2600_SILICON_REV2] = s->silicon_rev; 1111 s->regs[AST2600_HW_STRAP1] = s->hw_strap1; 1112 s->regs[AST2600_HW_STRAP2] = s->hw_strap2; 1113 s->regs[PROT_KEY] = s->hw_prot_key; 1114 } 1115 1116 static void aspeed_1030_scu_class_init(ObjectClass *klass, void *data) 1117 { 1118 DeviceClass *dc = DEVICE_CLASS(klass); 1119 AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass); 1120 1121 dc->desc = "ASPEED 1030 System Control Unit"; 1122 dc->reset = aspeed_ast1030_scu_reset; 1123 asc->resets = ast1030_a1_resets; 1124 asc->calc_hpll = aspeed_2600_scu_calc_hpll; 1125 asc->get_apb = aspeed_1030_scu_get_apb_freq; 1126 asc->apb_divider = 2; 1127 asc->nr_regs = ASPEED_AST2600_SCU_NR_REGS; 1128 asc->clkin_25Mhz = true; 1129 asc->ops = &aspeed_ast2600_scu_ops; 1130 } 1131 1132 static const TypeInfo aspeed_1030_scu_info = { 1133 .name = TYPE_ASPEED_1030_SCU, 1134 .parent = TYPE_ASPEED_SCU, 1135 .instance_size = sizeof(AspeedSCUState), 1136 .class_init = aspeed_1030_scu_class_init, 1137 }; 1138 1139 static void aspeed_scu_register_types(void) 1140 { 1141 type_register_static(&aspeed_scu_info); 1142 type_register_static(&aspeed_2400_scu_info); 1143 type_register_static(&aspeed_2500_scu_info); 1144 type_register_static(&aspeed_2600_scu_info); 1145 type_register_static(&aspeed_1030_scu_info); 1146 type_register_static(&aspeed_2700_scu_info); 1147 type_register_static(&aspeed_2700_scuio_info); 1148 } 1149 1150 type_init(aspeed_scu_register_types); 1151