xref: /openbmc/qemu/hw/misc/aspeed_scu.c (revision 654d6b04)
1 /*
2  * ASPEED System Control Unit
3  *
4  * Andrew Jeffery <andrew@aj.id.au>
5  *
6  * Copyright 2016 IBM Corp.
7  *
8  * This code is licensed under the GPL version 2 or later.  See
9  * the COPYING file in the top-level directory.
10  */
11 
12 #include "qemu/osdep.h"
13 #include "hw/misc/aspeed_scu.h"
14 #include "hw/qdev-properties.h"
15 #include "migration/vmstate.h"
16 #include "qapi/error.h"
17 #include "qapi/visitor.h"
18 #include "qemu/bitops.h"
19 #include "qemu/log.h"
20 #include "qemu/guest-random.h"
21 #include "qemu/module.h"
22 #include "trace.h"
23 
24 #define TO_REG(offset) ((offset) >> 2)
25 
26 #define PROT_KEY             TO_REG(0x00)
27 #define SYS_RST_CTRL         TO_REG(0x04)
28 #define CLK_SEL              TO_REG(0x08)
29 #define CLK_STOP_CTRL        TO_REG(0x0C)
30 #define FREQ_CNTR_CTRL       TO_REG(0x10)
31 #define FREQ_CNTR_EVAL       TO_REG(0x14)
32 #define IRQ_CTRL             TO_REG(0x18)
33 #define D2PLL_PARAM          TO_REG(0x1C)
34 #define MPLL_PARAM           TO_REG(0x20)
35 #define HPLL_PARAM           TO_REG(0x24)
36 #define FREQ_CNTR_RANGE      TO_REG(0x28)
37 #define MISC_CTRL1           TO_REG(0x2C)
38 #define PCI_CTRL1            TO_REG(0x30)
39 #define PCI_CTRL2            TO_REG(0x34)
40 #define PCI_CTRL3            TO_REG(0x38)
41 #define SYS_RST_STATUS       TO_REG(0x3C)
42 #define SOC_SCRATCH1         TO_REG(0x40)
43 #define SOC_SCRATCH2         TO_REG(0x44)
44 #define MAC_CLK_DELAY        TO_REG(0x48)
45 #define MISC_CTRL2           TO_REG(0x4C)
46 #define VGA_SCRATCH1         TO_REG(0x50)
47 #define VGA_SCRATCH2         TO_REG(0x54)
48 #define VGA_SCRATCH3         TO_REG(0x58)
49 #define VGA_SCRATCH4         TO_REG(0x5C)
50 #define VGA_SCRATCH5         TO_REG(0x60)
51 #define VGA_SCRATCH6         TO_REG(0x64)
52 #define VGA_SCRATCH7         TO_REG(0x68)
53 #define VGA_SCRATCH8         TO_REG(0x6C)
54 #define HW_STRAP1            TO_REG(0x70)
55 #define RNG_CTRL             TO_REG(0x74)
56 #define RNG_DATA             TO_REG(0x78)
57 #define SILICON_REV          TO_REG(0x7C)
58 #define PINMUX_CTRL1         TO_REG(0x80)
59 #define PINMUX_CTRL2         TO_REG(0x84)
60 #define PINMUX_CTRL3         TO_REG(0x88)
61 #define PINMUX_CTRL4         TO_REG(0x8C)
62 #define PINMUX_CTRL5         TO_REG(0x90)
63 #define PINMUX_CTRL6         TO_REG(0x94)
64 #define WDT_RST_CTRL         TO_REG(0x9C)
65 #define PINMUX_CTRL7         TO_REG(0xA0)
66 #define PINMUX_CTRL8         TO_REG(0xA4)
67 #define PINMUX_CTRL9         TO_REG(0xA8)
68 #define WAKEUP_EN            TO_REG(0xC0)
69 #define WAKEUP_CTRL          TO_REG(0xC4)
70 #define HW_STRAP2            TO_REG(0xD0)
71 #define FREE_CNTR4           TO_REG(0xE0)
72 #define FREE_CNTR4_EXT       TO_REG(0xE4)
73 #define CPU2_CTRL            TO_REG(0x100)
74 #define CPU2_BASE_SEG1       TO_REG(0x104)
75 #define CPU2_BASE_SEG2       TO_REG(0x108)
76 #define CPU2_BASE_SEG3       TO_REG(0x10C)
77 #define CPU2_BASE_SEG4       TO_REG(0x110)
78 #define CPU2_BASE_SEG5       TO_REG(0x114)
79 #define CPU2_CACHE_CTRL      TO_REG(0x118)
80 #define CHIP_ID0             TO_REG(0x150)
81 #define CHIP_ID1             TO_REG(0x154)
82 #define UART_HPLL_CLK        TO_REG(0x160)
83 #define PCIE_CTRL            TO_REG(0x180)
84 #define BMC_MMIO_CTRL        TO_REG(0x184)
85 #define RELOC_DECODE_BASE1   TO_REG(0x188)
86 #define RELOC_DECODE_BASE2   TO_REG(0x18C)
87 #define MAILBOX_DECODE_BASE  TO_REG(0x190)
88 #define SRAM_DECODE_BASE1    TO_REG(0x194)
89 #define SRAM_DECODE_BASE2    TO_REG(0x198)
90 #define BMC_REV              TO_REG(0x19C)
91 #define BMC_DEV_ID           TO_REG(0x1A4)
92 
93 #define AST2600_PROT_KEY          TO_REG(0x00)
94 #define AST2600_SILICON_REV       TO_REG(0x04)
95 #define AST2600_SILICON_REV2      TO_REG(0x14)
96 #define AST2600_SYS_RST_CTRL      TO_REG(0x40)
97 #define AST2600_SYS_RST_CTRL_CLR  TO_REG(0x44)
98 #define AST2600_SYS_RST_CTRL2     TO_REG(0x50)
99 #define AST2600_SYS_RST_CTRL2_CLR TO_REG(0x54)
100 #define AST2600_CLK_STOP_CTRL     TO_REG(0x80)
101 #define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84)
102 #define AST2600_CLK_STOP_CTRL2     TO_REG(0x90)
103 #define AST2600_CLK_STOP_CTRL2_CLR TO_REG(0x94)
104 #define AST2600_DEBUG_CTRL        TO_REG(0xC8)
105 #define AST2600_DEBUG_CTRL2       TO_REG(0xD8)
106 #define AST2600_SDRAM_HANDSHAKE   TO_REG(0x100)
107 #define AST2600_HPLL_PARAM        TO_REG(0x200)
108 #define AST2600_HPLL_EXT          TO_REG(0x204)
109 #define AST2600_APLL_PARAM        TO_REG(0x210)
110 #define AST2600_APLL_EXT          TO_REG(0x214)
111 #define AST2600_MPLL_PARAM        TO_REG(0x220)
112 #define AST2600_MPLL_EXT          TO_REG(0x224)
113 #define AST2600_EPLL_PARAM        TO_REG(0x240)
114 #define AST2600_EPLL_EXT          TO_REG(0x244)
115 #define AST2600_DPLL_PARAM        TO_REG(0x260)
116 #define AST2600_DPLL_EXT          TO_REG(0x264)
117 #define AST2600_CLK_SEL           TO_REG(0x300)
118 #define AST2600_CLK_SEL2          TO_REG(0x304)
119 #define AST2600_CLK_SEL3          TO_REG(0x308)
120 #define AST2600_CLK_SEL4          TO_REG(0x310)
121 #define AST2600_CLK_SEL5          TO_REG(0x314)
122 #define AST2600_UARTCLK           TO_REG(0x338)
123 #define AST2600_HUARTCLK          TO_REG(0x33C)
124 #define AST2600_HW_STRAP1         TO_REG(0x500)
125 #define AST2600_HW_STRAP1_CLR     TO_REG(0x504)
126 #define AST2600_HW_STRAP1_PROT    TO_REG(0x508)
127 #define AST2600_HW_STRAP2         TO_REG(0x510)
128 #define AST2600_HW_STRAP2_CLR     TO_REG(0x514)
129 #define AST2600_HW_STRAP2_PROT    TO_REG(0x518)
130 #define AST2600_RNG_CTRL          TO_REG(0x524)
131 #define AST2600_RNG_DATA          TO_REG(0x540)
132 #define AST2600_CHIP_ID0          TO_REG(0x5B0)
133 #define AST2600_CHIP_ID1          TO_REG(0x5B4)
134 
135 #define AST2600_CLK TO_REG(0x40)
136 
137 #define SCU_IO_REGION_SIZE 0x1000
138 
139 static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = {
140      [SYS_RST_CTRL]    = 0xFFCFFEDCU,
141      [CLK_SEL]         = 0xF3F40000U,
142      [CLK_STOP_CTRL]   = 0x19FC3E8BU,
143      [D2PLL_PARAM]     = 0x00026108U,
144      [MPLL_PARAM]      = 0x00030291U,
145      [HPLL_PARAM]      = 0x00000291U,
146      [MISC_CTRL1]      = 0x00000010U,
147      [PCI_CTRL1]       = 0x20001A03U,
148      [PCI_CTRL2]       = 0x20001A03U,
149      [PCI_CTRL3]       = 0x04000030U,
150      [SYS_RST_STATUS]  = 0x00000001U,
151      [SOC_SCRATCH1]    = 0x000000C0U, /* SoC completed DRAM init */
152      [MISC_CTRL2]      = 0x00000023U,
153      [RNG_CTRL]        = 0x0000000EU,
154      [PINMUX_CTRL2]    = 0x0000F000U,
155      [PINMUX_CTRL3]    = 0x01000000U,
156      [PINMUX_CTRL4]    = 0x000000FFU,
157      [PINMUX_CTRL5]    = 0x0000A000U,
158      [WDT_RST_CTRL]    = 0x003FFFF3U,
159      [PINMUX_CTRL8]    = 0xFFFF0000U,
160      [PINMUX_CTRL9]    = 0x000FFFFFU,
161      [FREE_CNTR4]      = 0x000000FFU,
162      [FREE_CNTR4_EXT]  = 0x000000FFU,
163      [CPU2_BASE_SEG1]  = 0x80000000U,
164      [CPU2_BASE_SEG4]  = 0x1E600000U,
165      [CPU2_BASE_SEG5]  = 0xC0000000U,
166      [UART_HPLL_CLK]   = 0x00001903U,
167      [PCIE_CTRL]       = 0x0000007BU,
168      [BMC_DEV_ID]      = 0x00002402U
169 };
170 
171 /* SCU70 bit 23: 0 24Mhz. bit 11:9: 0b001 AXI:ABH ratio 2:1 */
172 /* AST2500 revision A1 */
173 
174 static const uint32_t ast2500_a1_resets[ASPEED_SCU_NR_REGS] = {
175      [SYS_RST_CTRL]    = 0xFFCFFEDCU,
176      [CLK_SEL]         = 0xF3F40000U,
177      [CLK_STOP_CTRL]   = 0x19FC3E8BU,
178      [D2PLL_PARAM]     = 0x00026108U,
179      [MPLL_PARAM]      = 0x00030291U,
180      [HPLL_PARAM]      = 0x93000400U,
181      [MISC_CTRL1]      = 0x00000010U,
182      [PCI_CTRL1]       = 0x20001A03U,
183      [PCI_CTRL2]       = 0x20001A03U,
184      [PCI_CTRL3]       = 0x04000030U,
185      [SYS_RST_STATUS]  = 0x00000001U,
186      [SOC_SCRATCH1]    = 0x000000C0U, /* SoC completed DRAM init */
187      [MISC_CTRL2]      = 0x00000023U,
188      [RNG_CTRL]        = 0x0000000EU,
189      [PINMUX_CTRL2]    = 0x0000F000U,
190      [PINMUX_CTRL3]    = 0x03000000U,
191      [PINMUX_CTRL4]    = 0x00000000U,
192      [PINMUX_CTRL5]    = 0x0000A000U,
193      [WDT_RST_CTRL]    = 0x023FFFF3U,
194      [PINMUX_CTRL8]    = 0xFFFF0000U,
195      [PINMUX_CTRL9]    = 0x000FFFFFU,
196      [FREE_CNTR4]      = 0x000000FFU,
197      [FREE_CNTR4_EXT]  = 0x000000FFU,
198      [CPU2_BASE_SEG1]  = 0x80000000U,
199      [CPU2_BASE_SEG4]  = 0x1E600000U,
200      [CPU2_BASE_SEG5]  = 0xC0000000U,
201      [CHIP_ID0]        = 0x1234ABCDU,
202      [CHIP_ID1]        = 0x88884444U,
203      [UART_HPLL_CLK]   = 0x00001903U,
204      [PCIE_CTRL]       = 0x0000007BU,
205      [BMC_DEV_ID]      = 0x00002402U
206 };
207 
208 static uint32_t aspeed_scu_get_random(void)
209 {
210     uint32_t num;
211     qemu_guest_getrandom_nofail(&num, sizeof(num));
212     return num;
213 }
214 
215 uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s)
216 {
217     AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s);
218     uint32_t hpll = asc->calc_hpll(s, s->regs[HPLL_PARAM]);
219 
220     return hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[CLK_SEL]) + 1)
221         / asc->apb_divider;
222 }
223 
224 static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
225 {
226     AspeedSCUState *s = ASPEED_SCU(opaque);
227     int reg = TO_REG(offset);
228 
229     if (reg >= ASPEED_SCU_NR_REGS) {
230         qemu_log_mask(LOG_GUEST_ERROR,
231                       "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
232                       __func__, offset);
233         return 0;
234     }
235 
236     switch (reg) {
237     case RNG_DATA:
238         /* On hardware, RNG_DATA works regardless of
239          * the state of the enable bit in RNG_CTRL
240          */
241         s->regs[RNG_DATA] = aspeed_scu_get_random();
242         break;
243     case WAKEUP_EN:
244         qemu_log_mask(LOG_GUEST_ERROR,
245                       "%s: Read of write-only offset 0x%" HWADDR_PRIx "\n",
246                       __func__, offset);
247         break;
248     }
249 
250     return s->regs[reg];
251 }
252 
253 static void aspeed_ast2400_scu_write(void *opaque, hwaddr offset,
254                                      uint64_t data, unsigned size)
255 {
256     AspeedSCUState *s = ASPEED_SCU(opaque);
257     int reg = TO_REG(offset);
258 
259     if (reg >= ASPEED_SCU_NR_REGS) {
260         qemu_log_mask(LOG_GUEST_ERROR,
261                       "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
262                       __func__, offset);
263         return;
264     }
265 
266     if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 &&
267             !s->regs[PROT_KEY]) {
268         qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
269     }
270 
271     trace_aspeed_scu_write(offset, size, data);
272 
273     switch (reg) {
274     case PROT_KEY:
275         s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0;
276         return;
277     case SILICON_REV:
278     case FREQ_CNTR_EVAL:
279     case VGA_SCRATCH1 ... VGA_SCRATCH8:
280     case RNG_DATA:
281     case FREE_CNTR4:
282     case FREE_CNTR4_EXT:
283         qemu_log_mask(LOG_GUEST_ERROR,
284                       "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n",
285                       __func__, offset);
286         return;
287     }
288 
289     s->regs[reg] = data;
290 }
291 
292 static void aspeed_ast2500_scu_write(void *opaque, hwaddr offset,
293                                      uint64_t data, unsigned size)
294 {
295     AspeedSCUState *s = ASPEED_SCU(opaque);
296     int reg = TO_REG(offset);
297 
298     if (reg >= ASPEED_SCU_NR_REGS) {
299         qemu_log_mask(LOG_GUEST_ERROR,
300                       "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
301                       __func__, offset);
302         return;
303     }
304 
305     if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 &&
306             !s->regs[PROT_KEY]) {
307         qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
308         return;
309     }
310 
311     trace_aspeed_scu_write(offset, size, data);
312 
313     switch (reg) {
314     case PROT_KEY:
315         s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0;
316         return;
317     case HW_STRAP1:
318         s->regs[HW_STRAP1] |= data;
319         return;
320     case SILICON_REV:
321         s->regs[HW_STRAP1] &= ~data;
322         return;
323     case FREQ_CNTR_EVAL:
324     case VGA_SCRATCH1 ... VGA_SCRATCH8:
325     case RNG_DATA:
326     case FREE_CNTR4:
327     case FREE_CNTR4_EXT:
328     case CHIP_ID0:
329     case CHIP_ID1:
330         qemu_log_mask(LOG_GUEST_ERROR,
331                       "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n",
332                       __func__, offset);
333         return;
334     }
335 
336     s->regs[reg] = data;
337 }
338 
339 static const MemoryRegionOps aspeed_ast2400_scu_ops = {
340     .read = aspeed_scu_read,
341     .write = aspeed_ast2400_scu_write,
342     .endianness = DEVICE_LITTLE_ENDIAN,
343     .valid = {
344         .min_access_size = 1,
345         .max_access_size = 4,
346     },
347 };
348 
349 static const MemoryRegionOps aspeed_ast2500_scu_ops = {
350     .read = aspeed_scu_read,
351     .write = aspeed_ast2500_scu_write,
352     .endianness = DEVICE_LITTLE_ENDIAN,
353     .valid.min_access_size = 4,
354     .valid.max_access_size = 4,
355     .valid.unaligned = false,
356 };
357 
358 static uint32_t aspeed_scu_get_clkin(AspeedSCUState *s)
359 {
360     if (s->hw_strap1 & SCU_HW_STRAP_CLK_25M_IN) {
361         return 25000000;
362     } else if (s->hw_strap1 & SCU_HW_STRAP_CLK_48M_IN) {
363         return 48000000;
364     } else {
365         return 24000000;
366     }
367 }
368 
369 /*
370  * Strapped frequencies for the AST2400 in MHz. They depend on the
371  * clkin frequency.
372  */
373 static const uint32_t hpll_ast2400_freqs[][4] = {
374     { 384, 360, 336, 408 }, /* 24MHz or 48MHz */
375     { 400, 375, 350, 425 }, /* 25MHz */
376 };
377 
378 static uint32_t aspeed_2400_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg)
379 {
380     uint8_t freq_select;
381     bool clk_25m_in;
382     uint32_t clkin = aspeed_scu_get_clkin(s);
383 
384     if (hpll_reg & SCU_AST2400_H_PLL_OFF) {
385         return 0;
386     }
387 
388     if (hpll_reg & SCU_AST2400_H_PLL_PROGRAMMED) {
389         uint32_t multiplier = 1;
390 
391         if (!(hpll_reg & SCU_AST2400_H_PLL_BYPASS_EN)) {
392             uint32_t n  = (hpll_reg >> 5) & 0x3f;
393             uint32_t od = (hpll_reg >> 4) & 0x1;
394             uint32_t d  = hpll_reg & 0xf;
395 
396             multiplier = (2 - od) * ((n + 2) / (d + 1));
397         }
398 
399         return clkin * multiplier;
400     }
401 
402     /* HW strapping */
403     clk_25m_in = !!(s->hw_strap1 & SCU_HW_STRAP_CLK_25M_IN);
404     freq_select = SCU_AST2400_HW_STRAP_GET_H_PLL_CLK(s->hw_strap1);
405 
406     return hpll_ast2400_freqs[clk_25m_in][freq_select] * 1000000;
407 }
408 
409 static uint32_t aspeed_2500_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg)
410 {
411     uint32_t multiplier = 1;
412     uint32_t clkin = aspeed_scu_get_clkin(s);
413 
414     if (hpll_reg & SCU_H_PLL_OFF) {
415         return 0;
416     }
417 
418     if (!(hpll_reg & SCU_H_PLL_BYPASS_EN)) {
419         uint32_t p = (hpll_reg >> 13) & 0x3f;
420         uint32_t m = (hpll_reg >> 5) & 0xff;
421         uint32_t n = hpll_reg & 0x1f;
422 
423         multiplier = ((m + 1) / (n + 1)) / (p + 1);
424     }
425 
426     return clkin * multiplier;
427 }
428 
429 static void aspeed_scu_reset(DeviceState *dev)
430 {
431     AspeedSCUState *s = ASPEED_SCU(dev);
432     AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev);
433 
434     memcpy(s->regs, asc->resets, asc->nr_regs * 4);
435     s->regs[SILICON_REV] = s->silicon_rev;
436     s->regs[HW_STRAP1] = s->hw_strap1;
437     s->regs[HW_STRAP2] = s->hw_strap2;
438     s->regs[PROT_KEY] = s->hw_prot_key;
439 }
440 
441 static uint32_t aspeed_silicon_revs[] = {
442     AST2400_A0_SILICON_REV,
443     AST2400_A1_SILICON_REV,
444     AST2500_A0_SILICON_REV,
445     AST2500_A1_SILICON_REV,
446     AST2600_A0_SILICON_REV,
447     AST2600_A1_SILICON_REV,
448     AST2600_A2_SILICON_REV,
449     AST2600_A3_SILICON_REV,
450 };
451 
452 bool is_supported_silicon_rev(uint32_t silicon_rev)
453 {
454     int i;
455 
456     for (i = 0; i < ARRAY_SIZE(aspeed_silicon_revs); i++) {
457         if (silicon_rev == aspeed_silicon_revs[i]) {
458             return true;
459         }
460     }
461 
462     return false;
463 }
464 
465 static void aspeed_scu_realize(DeviceState *dev, Error **errp)
466 {
467     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
468     AspeedSCUState *s = ASPEED_SCU(dev);
469     AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev);
470 
471     if (!is_supported_silicon_rev(s->silicon_rev)) {
472         error_setg(errp, "Unknown silicon revision: 0x%" PRIx32,
473                 s->silicon_rev);
474         return;
475     }
476 
477     memory_region_init_io(&s->iomem, OBJECT(s), asc->ops, s,
478                           TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE);
479 
480     sysbus_init_mmio(sbd, &s->iomem);
481 }
482 
483 static const VMStateDescription vmstate_aspeed_scu = {
484     .name = "aspeed.scu",
485     .version_id = 2,
486     .minimum_version_id = 2,
487     .fields = (VMStateField[]) {
488         VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_AST2600_SCU_NR_REGS),
489         VMSTATE_END_OF_LIST()
490     }
491 };
492 
493 static Property aspeed_scu_properties[] = {
494     DEFINE_PROP_UINT32("silicon-rev", AspeedSCUState, silicon_rev, 0),
495     DEFINE_PROP_UINT32("hw-strap1", AspeedSCUState, hw_strap1, 0),
496     DEFINE_PROP_UINT32("hw-strap2", AspeedSCUState, hw_strap2, 0),
497     DEFINE_PROP_UINT32("hw-prot-key", AspeedSCUState, hw_prot_key, 0),
498     DEFINE_PROP_END_OF_LIST(),
499 };
500 
501 static void aspeed_scu_class_init(ObjectClass *klass, void *data)
502 {
503     DeviceClass *dc = DEVICE_CLASS(klass);
504     dc->realize = aspeed_scu_realize;
505     dc->reset = aspeed_scu_reset;
506     dc->desc = "ASPEED System Control Unit";
507     dc->vmsd = &vmstate_aspeed_scu;
508     device_class_set_props(dc, aspeed_scu_properties);
509 }
510 
511 static const TypeInfo aspeed_scu_info = {
512     .name = TYPE_ASPEED_SCU,
513     .parent = TYPE_SYS_BUS_DEVICE,
514     .instance_size = sizeof(AspeedSCUState),
515     .class_init = aspeed_scu_class_init,
516     .class_size    = sizeof(AspeedSCUClass),
517     .abstract      = true,
518 };
519 
520 static void aspeed_2400_scu_class_init(ObjectClass *klass, void *data)
521 {
522     DeviceClass *dc = DEVICE_CLASS(klass);
523     AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass);
524 
525     dc->desc = "ASPEED 2400 System Control Unit";
526     asc->resets = ast2400_a0_resets;
527     asc->calc_hpll = aspeed_2400_scu_calc_hpll;
528     asc->apb_divider = 2;
529     asc->nr_regs = ASPEED_SCU_NR_REGS;
530     asc->ops = &aspeed_ast2400_scu_ops;
531 }
532 
533 static const TypeInfo aspeed_2400_scu_info = {
534     .name = TYPE_ASPEED_2400_SCU,
535     .parent = TYPE_ASPEED_SCU,
536     .instance_size = sizeof(AspeedSCUState),
537     .class_init = aspeed_2400_scu_class_init,
538 };
539 
540 static void aspeed_2500_scu_class_init(ObjectClass *klass, void *data)
541 {
542     DeviceClass *dc = DEVICE_CLASS(klass);
543     AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass);
544 
545     dc->desc = "ASPEED 2500 System Control Unit";
546     asc->resets = ast2500_a1_resets;
547     asc->calc_hpll = aspeed_2500_scu_calc_hpll;
548     asc->apb_divider = 4;
549     asc->nr_regs = ASPEED_SCU_NR_REGS;
550     asc->ops = &aspeed_ast2500_scu_ops;
551 }
552 
553 static const TypeInfo aspeed_2500_scu_info = {
554     .name = TYPE_ASPEED_2500_SCU,
555     .parent = TYPE_ASPEED_SCU,
556     .instance_size = sizeof(AspeedSCUState),
557     .class_init = aspeed_2500_scu_class_init,
558 };
559 
560 static uint64_t aspeed_ast2600_scu_read(void *opaque, hwaddr offset,
561                                         unsigned size)
562 {
563     AspeedSCUState *s = ASPEED_SCU(opaque);
564     int reg = TO_REG(offset);
565 
566     if (reg >= ASPEED_AST2600_SCU_NR_REGS) {
567         qemu_log_mask(LOG_GUEST_ERROR,
568                       "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
569                       __func__, offset);
570         return 0;
571     }
572 
573     switch (reg) {
574     case AST2600_HPLL_EXT:
575     case AST2600_EPLL_EXT:
576     case AST2600_MPLL_EXT:
577         /* PLLs are always "locked" */
578         return s->regs[reg] | BIT(31);
579     case AST2600_RNG_DATA:
580         /*
581          * On hardware, RNG_DATA works regardless of the state of the
582          * enable bit in RNG_CTRL
583          *
584          * TODO: Check this is true for ast2600
585          */
586         s->regs[AST2600_RNG_DATA] = aspeed_scu_get_random();
587         break;
588     }
589 
590     return s->regs[reg];
591 }
592 
593 static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset,
594                                      uint64_t data64, unsigned size)
595 {
596     AspeedSCUState *s = ASPEED_SCU(opaque);
597     int reg = TO_REG(offset);
598     /* Truncate here so bitwise operations below behave as expected */
599     uint32_t data = data64;
600 
601     if (reg >= ASPEED_AST2600_SCU_NR_REGS) {
602         qemu_log_mask(LOG_GUEST_ERROR,
603                       "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
604                       __func__, offset);
605         return;
606     }
607 
608     if (reg > PROT_KEY && !s->regs[PROT_KEY]) {
609         qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
610     }
611 
612     trace_aspeed_scu_write(offset, size, data);
613 
614     switch (reg) {
615     case AST2600_PROT_KEY:
616         s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0;
617         return;
618     case AST2600_HW_STRAP1:
619     case AST2600_HW_STRAP2:
620         if (s->regs[reg + 2]) {
621             return;
622         }
623         /* fall through */
624     case AST2600_SYS_RST_CTRL:
625     case AST2600_SYS_RST_CTRL2:
626     case AST2600_CLK_STOP_CTRL:
627     case AST2600_CLK_STOP_CTRL2:
628         /* W1S (Write 1 to set) registers */
629         s->regs[reg] |= data;
630         return;
631     case AST2600_SYS_RST_CTRL_CLR:
632     case AST2600_SYS_RST_CTRL2_CLR:
633     case AST2600_CLK_STOP_CTRL_CLR:
634     case AST2600_CLK_STOP_CTRL2_CLR:
635     case AST2600_HW_STRAP1_CLR:
636     case AST2600_HW_STRAP2_CLR:
637         /*
638          * W1C (Write 1 to clear) registers are offset by one address from
639          * the data register
640          */
641         s->regs[reg - 1] &= ~data;
642         return;
643 
644     case AST2600_RNG_DATA:
645     case AST2600_SILICON_REV:
646     case AST2600_SILICON_REV2:
647     case AST2600_CHIP_ID0:
648     case AST2600_CHIP_ID1:
649         /* Add read only registers here */
650         qemu_log_mask(LOG_GUEST_ERROR,
651                       "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n",
652                       __func__, offset);
653         return;
654     }
655 
656     s->regs[reg] = data;
657 }
658 
659 static const MemoryRegionOps aspeed_ast2600_scu_ops = {
660     .read = aspeed_ast2600_scu_read,
661     .write = aspeed_ast2600_scu_write,
662     .endianness = DEVICE_LITTLE_ENDIAN,
663     .valid.min_access_size = 4,
664     .valid.max_access_size = 4,
665     .valid.unaligned = false,
666 };
667 
668 static const uint32_t ast2600_a3_resets[ASPEED_AST2600_SCU_NR_REGS] = {
669     [AST2600_SYS_RST_CTRL]      = 0xF7C3FED8,
670     [AST2600_SYS_RST_CTRL2]     = 0x0DFFFFFC,
671     [AST2600_CLK_STOP_CTRL]     = 0xFFFF7F8A,
672     [AST2600_CLK_STOP_CTRL2]    = 0xFFF0FFF0,
673     [AST2600_DEBUG_CTRL]        = 0x00000FFF,
674     [AST2600_DEBUG_CTRL2]       = 0x000000FF,
675     [AST2600_SDRAM_HANDSHAKE]   = 0x00000000,
676     [AST2600_HPLL_PARAM]        = 0x1000408F,
677     [AST2600_APLL_PARAM]        = 0x1000405F,
678     [AST2600_MPLL_PARAM]        = 0x1008405F,
679     [AST2600_EPLL_PARAM]        = 0x1004077F,
680     [AST2600_DPLL_PARAM]        = 0x1078405F,
681     [AST2600_CLK_SEL]           = 0xF3940000,
682     [AST2600_CLK_SEL2]          = 0x00700000,
683     [AST2600_CLK_SEL3]          = 0x00000000,
684     [AST2600_CLK_SEL4]          = 0xF3F40000,
685     [AST2600_CLK_SEL5]          = 0x30000000,
686     [AST2600_UARTCLK]           = 0x00014506,
687     [AST2600_HUARTCLK]          = 0x000145C0,
688     [AST2600_CHIP_ID0]          = 0x1234ABCD,
689     [AST2600_CHIP_ID1]          = 0x88884444,
690 };
691 
692 static void aspeed_ast2600_scu_reset(DeviceState *dev)
693 {
694     AspeedSCUState *s = ASPEED_SCU(dev);
695     AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev);
696 
697     memcpy(s->regs, asc->resets, asc->nr_regs * 4);
698 
699     /*
700      * A0 reports A0 in _REV, but subsequent revisions report A1 regardless
701      * of actual revision. QEMU and Linux only support A1 onwards so this is
702      * sufficient.
703      */
704     s->regs[AST2600_SILICON_REV] = AST2600_A3_SILICON_REV;
705     s->regs[AST2600_SILICON_REV2] = s->silicon_rev;
706     s->regs[AST2600_HW_STRAP1] = s->hw_strap1;
707     s->regs[AST2600_HW_STRAP2] = s->hw_strap2;
708     s->regs[PROT_KEY] = s->hw_prot_key;
709 }
710 
711 static void aspeed_2600_scu_class_init(ObjectClass *klass, void *data)
712 {
713     DeviceClass *dc = DEVICE_CLASS(klass);
714     AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass);
715 
716     dc->desc = "ASPEED 2600 System Control Unit";
717     dc->reset = aspeed_ast2600_scu_reset;
718     asc->resets = ast2600_a3_resets;
719     asc->calc_hpll = aspeed_2500_scu_calc_hpll; /* No change since AST2500 */
720     asc->apb_divider = 4;
721     asc->nr_regs = ASPEED_AST2600_SCU_NR_REGS;
722     asc->ops = &aspeed_ast2600_scu_ops;
723 }
724 
725 static const TypeInfo aspeed_2600_scu_info = {
726     .name = TYPE_ASPEED_2600_SCU,
727     .parent = TYPE_ASPEED_SCU,
728     .instance_size = sizeof(AspeedSCUState),
729     .class_init = aspeed_2600_scu_class_init,
730 };
731 
732 static void aspeed_scu_register_types(void)
733 {
734     type_register_static(&aspeed_scu_info);
735     type_register_static(&aspeed_2400_scu_info);
736     type_register_static(&aspeed_2500_scu_info);
737     type_register_static(&aspeed_2600_scu_info);
738 }
739 
740 type_init(aspeed_scu_register_types);
741