xref: /openbmc/qemu/hw/misc/aspeed_sbc.c (revision ed75658a)
1 /*
2  * ASPEED Secure Boot Controller
3  *
4  * Copyright (C) 2021-2022 IBM Corp.
5  *
6  * Joel Stanley <joel@jms.id.au>
7  *
8  * SPDX-License-Identifier: GPL-2.0-or-later
9  */
10 
11 #include "qemu/osdep.h"
12 #include "qemu/log.h"
13 #include "qemu/error-report.h"
14 #include "hw/qdev-properties.h"
15 #include "hw/misc/aspeed_sbc.h"
16 #include "qapi/error.h"
17 #include "migration/vmstate.h"
18 
19 #define R_PROT          (0x000 / 4)
20 #define R_STATUS        (0x014 / 4)
21 #define R_QSR           (0x040 / 4)
22 
23 /* R_STATUS */
24 #define ABR_EN                  BIT(14) /* Mirrors SCU510[11] */
25 #define ABR_IMAGE_SOURCE        BIT(13)
26 #define SPI_ABR_IMAGE_SOURCE    BIT(12)
27 #define SB_CRYPTO_KEY_EXP_DONE  BIT(11)
28 #define SB_CRYPTO_BUSY          BIT(10)
29 #define OTP_WP_EN               BIT(9)
30 #define OTP_ADDR_WP_EN          BIT(8)
31 #define LOW_SEC_KEY_EN          BIT(7)
32 #define SECURE_BOOT_EN          BIT(6)
33 #define UART_BOOT_EN            BIT(5)
34 /* bit 4 reserved*/
35 #define OTP_CHARGE_PUMP_READY   BIT(3)
36 #define OTP_IDLE                BIT(2)
37 #define OTP_MEM_IDLE            BIT(1)
38 #define OTP_COMPARE_STATUS      BIT(0)
39 
40 /* QSR */
41 #define QSR_RSA_MASK           (0x3 << 12)
42 #define QSR_HASH_MASK          (0x3 << 10)
43 
44 static uint64_t aspeed_sbc_read(void *opaque, hwaddr addr, unsigned int size)
45 {
46     AspeedSBCState *s = ASPEED_SBC(opaque);
47 
48     addr >>= 2;
49 
50     if (addr >= ASPEED_SBC_NR_REGS) {
51         qemu_log_mask(LOG_GUEST_ERROR,
52                       "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
53                       __func__, addr << 2);
54         return 0;
55     }
56 
57     return s->regs[addr];
58 }
59 
60 static void aspeed_sbc_write(void *opaque, hwaddr addr, uint64_t data,
61                               unsigned int size)
62 {
63     AspeedSBCState *s = ASPEED_SBC(opaque);
64 
65     addr >>= 2;
66 
67     if (addr >= ASPEED_SBC_NR_REGS) {
68         qemu_log_mask(LOG_GUEST_ERROR,
69                       "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
70                       __func__, addr << 2);
71         return;
72     }
73 
74     switch (addr) {
75     case R_STATUS:
76     case R_QSR:
77         qemu_log_mask(LOG_GUEST_ERROR,
78                       "%s: write to read only register 0x%" HWADDR_PRIx "\n",
79                       __func__, addr << 2);
80         return;
81     default:
82         break;
83     }
84 
85     s->regs[addr] = data;
86 }
87 
88 static const MemoryRegionOps aspeed_sbc_ops = {
89     .read = aspeed_sbc_read,
90     .write = aspeed_sbc_write,
91     .endianness = DEVICE_LITTLE_ENDIAN,
92     .valid = {
93         .min_access_size = 1,
94         .max_access_size = 4,
95     },
96 };
97 
98 static void aspeed_sbc_reset(DeviceState *dev)
99 {
100     struct AspeedSBCState *s = ASPEED_SBC(dev);
101 
102     memset(s->regs, 0, sizeof(s->regs));
103 
104     /* Set secure boot enabled with RSA4096_SHA256 and enable eMMC ABR */
105     s->regs[R_STATUS] = OTP_IDLE | OTP_MEM_IDLE;
106 
107     if (s->emmc_abr) {
108         s->regs[R_STATUS] &= ABR_EN;
109     }
110 
111     if (s->signing_settings) {
112         s->regs[R_STATUS] &= SECURE_BOOT_EN;
113     }
114 
115     s->regs[R_QSR] = s->signing_settings;
116 }
117 
118 static void aspeed_sbc_realize(DeviceState *dev, Error **errp)
119 {
120     AspeedSBCState *s = ASPEED_SBC(dev);
121     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
122 
123     memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_sbc_ops, s,
124             TYPE_ASPEED_SBC, 0x1000);
125 
126     sysbus_init_mmio(sbd, &s->iomem);
127 }
128 
129 static const VMStateDescription vmstate_aspeed_sbc = {
130     .name = TYPE_ASPEED_SBC,
131     .version_id = 1,
132     .minimum_version_id = 1,
133     .fields = (const VMStateField[]) {
134         VMSTATE_UINT32_ARRAY(regs, AspeedSBCState, ASPEED_SBC_NR_REGS),
135         VMSTATE_END_OF_LIST(),
136     }
137 };
138 
139 static Property aspeed_sbc_properties[] = {
140     DEFINE_PROP_BOOL("emmc-abr", AspeedSBCState, emmc_abr, 0),
141     DEFINE_PROP_UINT32("signing-settings", AspeedSBCState, signing_settings, 0),
142     DEFINE_PROP_END_OF_LIST(),
143 };
144 
145 static void aspeed_sbc_class_init(ObjectClass *klass, void *data)
146 {
147     DeviceClass *dc = DEVICE_CLASS(klass);
148 
149     dc->realize = aspeed_sbc_realize;
150     dc->reset = aspeed_sbc_reset;
151     dc->vmsd = &vmstate_aspeed_sbc;
152     device_class_set_props(dc, aspeed_sbc_properties);
153 }
154 
155 static const TypeInfo aspeed_sbc_info = {
156     .name = TYPE_ASPEED_SBC,
157     .parent = TYPE_SYS_BUS_DEVICE,
158     .instance_size = sizeof(AspeedSBCState),
159     .class_init = aspeed_sbc_class_init,
160     .class_size = sizeof(AspeedSBCClass)
161 };
162 
163 static void aspeed_ast2600_sbc_class_init(ObjectClass *klass, void *data)
164 {
165     DeviceClass *dc = DEVICE_CLASS(klass);
166 
167     dc->desc = "AST2600 Secure Boot Controller";
168 }
169 
170 static const TypeInfo aspeed_ast2600_sbc_info = {
171     .name = TYPE_ASPEED_AST2600_SBC,
172     .parent = TYPE_ASPEED_SBC,
173     .class_init = aspeed_ast2600_sbc_class_init,
174 };
175 
176 static void aspeed_sbc_register_types(void)
177 {
178     type_register_static(&aspeed_ast2600_sbc_info);
179     type_register_static(&aspeed_sbc_info);
180 }
181 
182 type_init(aspeed_sbc_register_types);
183