1 /* 2 * QEMU Malta board support 3 * 4 * Copyright (c) 2006 Aurelien Jarno 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "qemu/units.h" 27 #include "qemu-common.h" 28 #include "cpu.h" 29 #include "hw/southbridge/piix.h" 30 #include "hw/isa/superio.h" 31 #include "hw/char/serial.h" 32 #include "net/net.h" 33 #include "hw/boards.h" 34 #include "hw/i2c/smbus_eeprom.h" 35 #include "hw/block/flash.h" 36 #include "hw/mips/mips.h" 37 #include "hw/mips/cpudevs.h" 38 #include "hw/pci/pci.h" 39 #include "sysemu/sysemu.h" 40 #include "sysemu/arch_init.h" 41 #include "qemu/log.h" 42 #include "hw/mips/bios.h" 43 #include "hw/ide.h" 44 #include "hw/irq.h" 45 #include "hw/loader.h" 46 #include "elf.h" 47 #include "exec/address-spaces.h" 48 #include "hw/sysbus.h" /* SysBusDevice */ 49 #include "qemu/host-utils.h" 50 #include "sysemu/qtest.h" 51 #include "sysemu/reset.h" 52 #include "sysemu/runstate.h" 53 #include "qapi/error.h" 54 #include "qemu/error-report.h" 55 #include "hw/empty_slot.h" 56 #include "sysemu/kvm.h" 57 #include "hw/semihosting/semihost.h" 58 #include "hw/mips/cps.h" 59 60 #define ENVP_ADDR 0x80002000l 61 #define ENVP_NB_ENTRIES 16 62 #define ENVP_ENTRY_SIZE 256 63 64 /* Hardware addresses */ 65 #define FLASH_ADDRESS 0x1e000000ULL 66 #define FPGA_ADDRESS 0x1f000000ULL 67 #define RESET_ADDRESS 0x1fc00000ULL 68 69 #define FLASH_SIZE 0x400000 70 71 #define MAX_IDE_BUS 2 72 73 typedef struct { 74 MemoryRegion iomem; 75 MemoryRegion iomem_lo; /* 0 - 0x900 */ 76 MemoryRegion iomem_hi; /* 0xa00 - 0x100000 */ 77 uint32_t leds; 78 uint32_t brk; 79 uint32_t gpout; 80 uint32_t i2cin; 81 uint32_t i2coe; 82 uint32_t i2cout; 83 uint32_t i2csel; 84 CharBackend display; 85 char display_text[9]; 86 SerialMM *uart; 87 bool display_inited; 88 } MaltaFPGAState; 89 90 #define TYPE_MIPS_MALTA "mips-malta" 91 #define MIPS_MALTA(obj) OBJECT_CHECK(MaltaState, (obj), TYPE_MIPS_MALTA) 92 93 typedef struct { 94 SysBusDevice parent_obj; 95 96 MIPSCPSState cps; 97 qemu_irq i8259[ISA_NUM_IRQS]; 98 } MaltaState; 99 100 static struct _loaderparams { 101 int ram_size, ram_low_size; 102 const char *kernel_filename; 103 const char *kernel_cmdline; 104 const char *initrd_filename; 105 } loaderparams; 106 107 /* Malta FPGA */ 108 static void malta_fpga_update_display(void *opaque) 109 { 110 char leds_text[9]; 111 int i; 112 MaltaFPGAState *s = opaque; 113 114 for (i = 7 ; i >= 0 ; i--) { 115 if (s->leds & (1 << i)) { 116 leds_text[i] = '#'; 117 } else { 118 leds_text[i] = ' '; 119 } 120 } 121 leds_text[8] = '\0'; 122 123 qemu_chr_fe_printf(&s->display, "\e[H\n\n|\e[32m%-8.8s\e[00m|\r\n", 124 leds_text); 125 qemu_chr_fe_printf(&s->display, "\n\n\n\n|\e[31m%-8.8s\e[00m|", 126 s->display_text); 127 } 128 129 /* 130 * EEPROM 24C01 / 24C02 emulation. 131 * 132 * Emulation for serial EEPROMs: 133 * 24C01 - 1024 bit (128 x 8) 134 * 24C02 - 2048 bit (256 x 8) 135 * 136 * Typical device names include Microchip 24C02SC or SGS Thomson ST24C02. 137 */ 138 139 #if defined(DEBUG) 140 # define logout(fmt, ...) \ 141 fprintf(stderr, "MALTA\t%-24s" fmt, __func__, ## __VA_ARGS__) 142 #else 143 # define logout(fmt, ...) ((void)0) 144 #endif 145 146 struct _eeprom24c0x_t { 147 uint8_t tick; 148 uint8_t address; 149 uint8_t command; 150 uint8_t ack; 151 uint8_t scl; 152 uint8_t sda; 153 uint8_t data; 154 /* uint16_t size; */ 155 uint8_t contents[256]; 156 }; 157 158 typedef struct _eeprom24c0x_t eeprom24c0x_t; 159 160 static eeprom24c0x_t spd_eeprom = { 161 .contents = { 162 /* 00000000: */ 163 0x80, 0x08, 0xFF, 0x0D, 0x0A, 0xFF, 0x40, 0x00, 164 /* 00000008: */ 165 0x01, 0x75, 0x54, 0x00, 0x82, 0x08, 0x00, 0x01, 166 /* 00000010: */ 167 0x8F, 0x04, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 168 /* 00000018: */ 169 0x00, 0x00, 0x00, 0x14, 0x0F, 0x14, 0x2D, 0xFF, 170 /* 00000020: */ 171 0x15, 0x08, 0x15, 0x08, 0x00, 0x00, 0x00, 0x00, 172 /* 00000028: */ 173 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 174 /* 00000030: */ 175 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 176 /* 00000038: */ 177 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xD0, 178 /* 00000040: */ 179 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 180 /* 00000048: */ 181 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 182 /* 00000050: */ 183 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 184 /* 00000058: */ 185 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 186 /* 00000060: */ 187 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 188 /* 00000068: */ 189 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 190 /* 00000070: */ 191 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 192 /* 00000078: */ 193 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x64, 0xF4, 194 }, 195 }; 196 197 static void generate_eeprom_spd(uint8_t *eeprom, ram_addr_t ram_size) 198 { 199 enum { SDR = 0x4, DDR2 = 0x8 } type; 200 uint8_t *spd = spd_eeprom.contents; 201 uint8_t nbanks = 0; 202 uint16_t density = 0; 203 int i; 204 205 /* work in terms of MB */ 206 ram_size /= MiB; 207 208 while ((ram_size >= 4) && (nbanks <= 2)) { 209 int sz_log2 = MIN(31 - clz32(ram_size), 14); 210 nbanks++; 211 density |= 1 << (sz_log2 - 2); 212 ram_size -= 1 << sz_log2; 213 } 214 215 /* split to 2 banks if possible */ 216 if ((nbanks == 1) && (density > 1)) { 217 nbanks++; 218 density >>= 1; 219 } 220 221 if (density & 0xff00) { 222 density = (density & 0xe0) | ((density >> 8) & 0x1f); 223 type = DDR2; 224 } else if (!(density & 0x1f)) { 225 type = DDR2; 226 } else { 227 type = SDR; 228 } 229 230 if (ram_size) { 231 warn_report("SPD cannot represent final " RAM_ADDR_FMT "MB" 232 " of SDRAM", ram_size); 233 } 234 235 /* fill in SPD memory information */ 236 spd[2] = type; 237 spd[5] = nbanks; 238 spd[31] = density; 239 240 /* checksum */ 241 spd[63] = 0; 242 for (i = 0; i < 63; i++) { 243 spd[63] += spd[i]; 244 } 245 246 /* copy for SMBUS */ 247 memcpy(eeprom, spd, sizeof(spd_eeprom.contents)); 248 } 249 250 static void generate_eeprom_serial(uint8_t *eeprom) 251 { 252 int i, pos = 0; 253 uint8_t mac[6] = { 0x00 }; 254 uint8_t sn[5] = { 0x01, 0x23, 0x45, 0x67, 0x89 }; 255 256 /* version */ 257 eeprom[pos++] = 0x01; 258 259 /* count */ 260 eeprom[pos++] = 0x02; 261 262 /* MAC address */ 263 eeprom[pos++] = 0x01; /* MAC */ 264 eeprom[pos++] = 0x06; /* length */ 265 memcpy(&eeprom[pos], mac, sizeof(mac)); 266 pos += sizeof(mac); 267 268 /* serial number */ 269 eeprom[pos++] = 0x02; /* serial */ 270 eeprom[pos++] = 0x05; /* length */ 271 memcpy(&eeprom[pos], sn, sizeof(sn)); 272 pos += sizeof(sn); 273 274 /* checksum */ 275 eeprom[pos] = 0; 276 for (i = 0; i < pos; i++) { 277 eeprom[pos] += eeprom[i]; 278 } 279 } 280 281 static uint8_t eeprom24c0x_read(eeprom24c0x_t *eeprom) 282 { 283 logout("%u: scl = %u, sda = %u, data = 0x%02x\n", 284 eeprom->tick, eeprom->scl, eeprom->sda, eeprom->data); 285 return eeprom->sda; 286 } 287 288 static void eeprom24c0x_write(eeprom24c0x_t *eeprom, int scl, int sda) 289 { 290 if (eeprom->scl && scl && (eeprom->sda != sda)) { 291 logout("%u: scl = %u->%u, sda = %u->%u i2c %s\n", 292 eeprom->tick, eeprom->scl, scl, eeprom->sda, sda, 293 sda ? "stop" : "start"); 294 if (!sda) { 295 eeprom->tick = 1; 296 eeprom->command = 0; 297 } 298 } else if (eeprom->tick == 0 && !eeprom->ack) { 299 /* Waiting for start. */ 300 logout("%u: scl = %u->%u, sda = %u->%u wait for i2c start\n", 301 eeprom->tick, eeprom->scl, scl, eeprom->sda, sda); 302 } else if (!eeprom->scl && scl) { 303 logout("%u: scl = %u->%u, sda = %u->%u trigger bit\n", 304 eeprom->tick, eeprom->scl, scl, eeprom->sda, sda); 305 if (eeprom->ack) { 306 logout("\ti2c ack bit = 0\n"); 307 sda = 0; 308 eeprom->ack = 0; 309 } else if (eeprom->sda == sda) { 310 uint8_t bit = (sda != 0); 311 logout("\ti2c bit = %d\n", bit); 312 if (eeprom->tick < 9) { 313 eeprom->command <<= 1; 314 eeprom->command += bit; 315 eeprom->tick++; 316 if (eeprom->tick == 9) { 317 logout("\tcommand 0x%04x, %s\n", eeprom->command, 318 bit ? "read" : "write"); 319 eeprom->ack = 1; 320 } 321 } else if (eeprom->tick < 17) { 322 if (eeprom->command & 1) { 323 sda = ((eeprom->data & 0x80) != 0); 324 } 325 eeprom->address <<= 1; 326 eeprom->address += bit; 327 eeprom->tick++; 328 eeprom->data <<= 1; 329 if (eeprom->tick == 17) { 330 eeprom->data = eeprom->contents[eeprom->address]; 331 logout("\taddress 0x%04x, data 0x%02x\n", 332 eeprom->address, eeprom->data); 333 eeprom->ack = 1; 334 eeprom->tick = 0; 335 } 336 } else if (eeprom->tick >= 17) { 337 sda = 0; 338 } 339 } else { 340 logout("\tsda changed with raising scl\n"); 341 } 342 } else { 343 logout("%u: scl = %u->%u, sda = %u->%u\n", eeprom->tick, eeprom->scl, 344 scl, eeprom->sda, sda); 345 } 346 eeprom->scl = scl; 347 eeprom->sda = sda; 348 } 349 350 static uint64_t malta_fpga_read(void *opaque, hwaddr addr, 351 unsigned size) 352 { 353 MaltaFPGAState *s = opaque; 354 uint32_t val = 0; 355 uint32_t saddr; 356 357 saddr = (addr & 0xfffff); 358 359 switch (saddr) { 360 361 /* SWITCH Register */ 362 case 0x00200: 363 val = 0x00000000; 364 break; 365 366 /* STATUS Register */ 367 case 0x00208: 368 #ifdef TARGET_WORDS_BIGENDIAN 369 val = 0x00000012; 370 #else 371 val = 0x00000010; 372 #endif 373 break; 374 375 /* JMPRS Register */ 376 case 0x00210: 377 val = 0x00; 378 break; 379 380 /* LEDBAR Register */ 381 case 0x00408: 382 val = s->leds; 383 break; 384 385 /* BRKRES Register */ 386 case 0x00508: 387 val = s->brk; 388 break; 389 390 /* UART Registers are handled directly by the serial device */ 391 392 /* GPOUT Register */ 393 case 0x00a00: 394 val = s->gpout; 395 break; 396 397 /* XXX: implement a real I2C controller */ 398 399 /* GPINP Register */ 400 case 0x00a08: 401 /* IN = OUT until a real I2C control is implemented */ 402 if (s->i2csel) { 403 val = s->i2cout; 404 } else { 405 val = 0x00; 406 } 407 break; 408 409 /* I2CINP Register */ 410 case 0x00b00: 411 val = ((s->i2cin & ~1) | eeprom24c0x_read(&spd_eeprom)); 412 break; 413 414 /* I2COE Register */ 415 case 0x00b08: 416 val = s->i2coe; 417 break; 418 419 /* I2COUT Register */ 420 case 0x00b10: 421 val = s->i2cout; 422 break; 423 424 /* I2CSEL Register */ 425 case 0x00b18: 426 val = s->i2csel; 427 break; 428 429 default: 430 qemu_log_mask(LOG_GUEST_ERROR, 431 "malta_fpga_read: Bad register addr 0x%"HWADDR_PRIX"\n", 432 addr); 433 break; 434 } 435 return val; 436 } 437 438 static void malta_fpga_write(void *opaque, hwaddr addr, 439 uint64_t val, unsigned size) 440 { 441 MaltaFPGAState *s = opaque; 442 uint32_t saddr; 443 444 saddr = (addr & 0xfffff); 445 446 switch (saddr) { 447 448 /* SWITCH Register */ 449 case 0x00200: 450 break; 451 452 /* JMPRS Register */ 453 case 0x00210: 454 break; 455 456 /* LEDBAR Register */ 457 case 0x00408: 458 s->leds = val & 0xff; 459 malta_fpga_update_display(s); 460 break; 461 462 /* ASCIIWORD Register */ 463 case 0x00410: 464 snprintf(s->display_text, 9, "%08X", (uint32_t)val); 465 malta_fpga_update_display(s); 466 break; 467 468 /* ASCIIPOS0 to ASCIIPOS7 Registers */ 469 case 0x00418: 470 case 0x00420: 471 case 0x00428: 472 case 0x00430: 473 case 0x00438: 474 case 0x00440: 475 case 0x00448: 476 case 0x00450: 477 s->display_text[(saddr - 0x00418) >> 3] = (char) val; 478 malta_fpga_update_display(s); 479 break; 480 481 /* SOFTRES Register */ 482 case 0x00500: 483 if (val == 0x42) { 484 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 485 } 486 break; 487 488 /* BRKRES Register */ 489 case 0x00508: 490 s->brk = val & 0xff; 491 break; 492 493 /* UART Registers are handled directly by the serial device */ 494 495 /* GPOUT Register */ 496 case 0x00a00: 497 s->gpout = val & 0xff; 498 break; 499 500 /* I2COE Register */ 501 case 0x00b08: 502 s->i2coe = val & 0x03; 503 break; 504 505 /* I2COUT Register */ 506 case 0x00b10: 507 eeprom24c0x_write(&spd_eeprom, val & 0x02, val & 0x01); 508 s->i2cout = val; 509 break; 510 511 /* I2CSEL Register */ 512 case 0x00b18: 513 s->i2csel = val & 0x01; 514 break; 515 516 default: 517 qemu_log_mask(LOG_GUEST_ERROR, 518 "malta_fpga_write: Bad register addr 0x%"HWADDR_PRIX"\n", 519 addr); 520 break; 521 } 522 } 523 524 static const MemoryRegionOps malta_fpga_ops = { 525 .read = malta_fpga_read, 526 .write = malta_fpga_write, 527 .endianness = DEVICE_NATIVE_ENDIAN, 528 }; 529 530 static void malta_fpga_reset(void *opaque) 531 { 532 MaltaFPGAState *s = opaque; 533 534 s->leds = 0x00; 535 s->brk = 0x0a; 536 s->gpout = 0x00; 537 s->i2cin = 0x3; 538 s->i2coe = 0x0; 539 s->i2cout = 0x3; 540 s->i2csel = 0x1; 541 542 s->display_text[8] = '\0'; 543 snprintf(s->display_text, 9, " "); 544 } 545 546 static void malta_fgpa_display_event(void *opaque, QEMUChrEvent event) 547 { 548 MaltaFPGAState *s = opaque; 549 550 if (event == CHR_EVENT_OPENED && !s->display_inited) { 551 qemu_chr_fe_printf(&s->display, "\e[HMalta LEDBAR\r\n"); 552 qemu_chr_fe_printf(&s->display, "+--------+\r\n"); 553 qemu_chr_fe_printf(&s->display, "+ +\r\n"); 554 qemu_chr_fe_printf(&s->display, "+--------+\r\n"); 555 qemu_chr_fe_printf(&s->display, "\n"); 556 qemu_chr_fe_printf(&s->display, "Malta ASCII\r\n"); 557 qemu_chr_fe_printf(&s->display, "+--------+\r\n"); 558 qemu_chr_fe_printf(&s->display, "+ +\r\n"); 559 qemu_chr_fe_printf(&s->display, "+--------+\r\n"); 560 s->display_inited = true; 561 } 562 } 563 564 static MaltaFPGAState *malta_fpga_init(MemoryRegion *address_space, 565 hwaddr base, qemu_irq uart_irq, Chardev *uart_chr) 566 { 567 MaltaFPGAState *s; 568 Chardev *chr; 569 570 s = g_new0(MaltaFPGAState, 1); 571 572 memory_region_init_io(&s->iomem, NULL, &malta_fpga_ops, s, 573 "malta-fpga", 0x100000); 574 memory_region_init_alias(&s->iomem_lo, NULL, "malta-fpga", 575 &s->iomem, 0, 0x900); 576 memory_region_init_alias(&s->iomem_hi, NULL, "malta-fpga", 577 &s->iomem, 0xa00, 0x10000 - 0xa00); 578 579 memory_region_add_subregion(address_space, base, &s->iomem_lo); 580 memory_region_add_subregion(address_space, base + 0xa00, &s->iomem_hi); 581 582 chr = qemu_chr_new("fpga", "vc:320x200", NULL); 583 qemu_chr_fe_init(&s->display, chr, NULL); 584 qemu_chr_fe_set_handlers(&s->display, NULL, NULL, 585 malta_fgpa_display_event, NULL, s, NULL, true); 586 587 s->uart = serial_mm_init(address_space, base + 0x900, 3, uart_irq, 588 230400, uart_chr, DEVICE_NATIVE_ENDIAN); 589 590 malta_fpga_reset(s); 591 qemu_register_reset(malta_fpga_reset, s); 592 593 return s; 594 } 595 596 /* Network support */ 597 static void network_init(PCIBus *pci_bus) 598 { 599 int i; 600 601 for (i = 0; i < nb_nics; i++) { 602 NICInfo *nd = &nd_table[i]; 603 const char *default_devaddr = NULL; 604 605 if (i == 0 && (!nd->model || strcmp(nd->model, "pcnet") == 0)) 606 /* The malta board has a PCNet card using PCI SLOT 11 */ 607 default_devaddr = "0b"; 608 609 pci_nic_init_nofail(nd, pci_bus, "pcnet", default_devaddr); 610 } 611 } 612 613 static void write_bootloader_nanomips(uint8_t *base, int64_t run_addr, 614 int64_t kernel_entry) 615 { 616 uint16_t *p; 617 618 /* Small bootloader */ 619 p = (uint16_t *)base; 620 621 #define NM_HI1(VAL) (((VAL) >> 16) & 0x1f) 622 #define NM_HI2(VAL) \ 623 (((VAL) & 0xf000) | (((VAL) >> 19) & 0xffc) | (((VAL) >> 31) & 0x1)) 624 #define NM_LO(VAL) ((VAL) & 0xfff) 625 626 stw_p(p++, 0x2800); stw_p(p++, 0x001c); 627 /* bc to_here */ 628 stw_p(p++, 0x8000); stw_p(p++, 0xc000); 629 /* nop */ 630 stw_p(p++, 0x8000); stw_p(p++, 0xc000); 631 /* nop */ 632 stw_p(p++, 0x8000); stw_p(p++, 0xc000); 633 /* nop */ 634 stw_p(p++, 0x8000); stw_p(p++, 0xc000); 635 /* nop */ 636 stw_p(p++, 0x8000); stw_p(p++, 0xc000); 637 /* nop */ 638 stw_p(p++, 0x8000); stw_p(p++, 0xc000); 639 /* nop */ 640 stw_p(p++, 0x8000); stw_p(p++, 0xc000); 641 /* nop */ 642 643 /* to_here: */ 644 if (semihosting_get_argc()) { 645 /* Preserve a0 content as arguments have been passed */ 646 stw_p(p++, 0x8000); stw_p(p++, 0xc000); 647 /* nop */ 648 } else { 649 stw_p(p++, 0x0080); stw_p(p++, 0x0002); 650 /* li a0,2 */ 651 } 652 653 stw_p(p++, 0xe3a0 | NM_HI1(ENVP_ADDR - 64)); 654 655 stw_p(p++, NM_HI2(ENVP_ADDR - 64)); 656 /* lui sp,%hi(ENVP_ADDR - 64) */ 657 658 stw_p(p++, 0x83bd); stw_p(p++, NM_LO(ENVP_ADDR - 64)); 659 /* ori sp,sp,%lo(ENVP_ADDR - 64) */ 660 661 stw_p(p++, 0xe0a0 | NM_HI1(ENVP_ADDR)); 662 663 stw_p(p++, NM_HI2(ENVP_ADDR)); 664 /* lui a1,%hi(ENVP_ADDR) */ 665 666 stw_p(p++, 0x80a5); stw_p(p++, NM_LO(ENVP_ADDR)); 667 /* ori a1,a1,%lo(ENVP_ADDR) */ 668 669 stw_p(p++, 0xe0c0 | NM_HI1(ENVP_ADDR + 8)); 670 671 stw_p(p++, NM_HI2(ENVP_ADDR + 8)); 672 /* lui a2,%hi(ENVP_ADDR + 8) */ 673 674 stw_p(p++, 0x80c6); stw_p(p++, NM_LO(ENVP_ADDR + 8)); 675 /* ori a2,a2,%lo(ENVP_ADDR + 8) */ 676 677 stw_p(p++, 0xe0e0 | NM_HI1(loaderparams.ram_low_size)); 678 679 stw_p(p++, NM_HI2(loaderparams.ram_low_size)); 680 /* lui a3,%hi(loaderparams.ram_low_size) */ 681 682 stw_p(p++, 0x80e7); stw_p(p++, NM_LO(loaderparams.ram_low_size)); 683 /* ori a3,a3,%lo(loaderparams.ram_low_size) */ 684 685 /* 686 * Load BAR registers as done by YAMON: 687 * 688 * - set up PCI0 I/O BARs from 0x18000000 to 0x181fffff 689 * - set up PCI0 MEM0 at 0x10000000, size 0x8000000 690 * - set up PCI0 MEM1 at 0x18200000, size 0xbe00000 691 * 692 */ 693 stw_p(p++, 0xe040); stw_p(p++, 0x0681); 694 /* lui t1, %hi(0xb4000000) */ 695 696 #ifdef TARGET_WORDS_BIGENDIAN 697 698 stw_p(p++, 0xe020); stw_p(p++, 0x0be1); 699 /* lui t0, %hi(0xdf000000) */ 700 701 /* 0x68 corresponds to GT_ISD (from hw/mips/gt64xxx_pci.c) */ 702 stw_p(p++, 0x8422); stw_p(p++, 0x9068); 703 /* sw t0, 0x68(t1) */ 704 705 stw_p(p++, 0xe040); stw_p(p++, 0x077d); 706 /* lui t1, %hi(0xbbe00000) */ 707 708 stw_p(p++, 0xe020); stw_p(p++, 0x0801); 709 /* lui t0, %hi(0xc0000000) */ 710 711 /* 0x48 corresponds to GT_PCI0IOLD */ 712 stw_p(p++, 0x8422); stw_p(p++, 0x9048); 713 /* sw t0, 0x48(t1) */ 714 715 stw_p(p++, 0xe020); stw_p(p++, 0x0800); 716 /* lui t0, %hi(0x40000000) */ 717 718 /* 0x50 corresponds to GT_PCI0IOHD */ 719 stw_p(p++, 0x8422); stw_p(p++, 0x9050); 720 /* sw t0, 0x50(t1) */ 721 722 stw_p(p++, 0xe020); stw_p(p++, 0x0001); 723 /* lui t0, %hi(0x80000000) */ 724 725 /* 0x58 corresponds to GT_PCI0M0LD */ 726 stw_p(p++, 0x8422); stw_p(p++, 0x9058); 727 /* sw t0, 0x58(t1) */ 728 729 stw_p(p++, 0xe020); stw_p(p++, 0x07e0); 730 /* lui t0, %hi(0x3f000000) */ 731 732 /* 0x60 corresponds to GT_PCI0M0HD */ 733 stw_p(p++, 0x8422); stw_p(p++, 0x9060); 734 /* sw t0, 0x60(t1) */ 735 736 stw_p(p++, 0xe020); stw_p(p++, 0x0821); 737 /* lui t0, %hi(0xc1000000) */ 738 739 /* 0x80 corresponds to GT_PCI0M1LD */ 740 stw_p(p++, 0x8422); stw_p(p++, 0x9080); 741 /* sw t0, 0x80(t1) */ 742 743 stw_p(p++, 0xe020); stw_p(p++, 0x0bc0); 744 /* lui t0, %hi(0x5e000000) */ 745 746 #else 747 748 stw_p(p++, 0x0020); stw_p(p++, 0x00df); 749 /* addiu[32] t0, $0, 0xdf */ 750 751 /* 0x68 corresponds to GT_ISD */ 752 stw_p(p++, 0x8422); stw_p(p++, 0x9068); 753 /* sw t0, 0x68(t1) */ 754 755 /* Use kseg2 remapped address 0x1be00000 */ 756 stw_p(p++, 0xe040); stw_p(p++, 0x077d); 757 /* lui t1, %hi(0xbbe00000) */ 758 759 stw_p(p++, 0x0020); stw_p(p++, 0x00c0); 760 /* addiu[32] t0, $0, 0xc0 */ 761 762 /* 0x48 corresponds to GT_PCI0IOLD */ 763 stw_p(p++, 0x8422); stw_p(p++, 0x9048); 764 /* sw t0, 0x48(t1) */ 765 766 stw_p(p++, 0x0020); stw_p(p++, 0x0040); 767 /* addiu[32] t0, $0, 0x40 */ 768 769 /* 0x50 corresponds to GT_PCI0IOHD */ 770 stw_p(p++, 0x8422); stw_p(p++, 0x9050); 771 /* sw t0, 0x50(t1) */ 772 773 stw_p(p++, 0x0020); stw_p(p++, 0x0080); 774 /* addiu[32] t0, $0, 0x80 */ 775 776 /* 0x58 corresponds to GT_PCI0M0LD */ 777 stw_p(p++, 0x8422); stw_p(p++, 0x9058); 778 /* sw t0, 0x58(t1) */ 779 780 stw_p(p++, 0x0020); stw_p(p++, 0x003f); 781 /* addiu[32] t0, $0, 0x3f */ 782 783 /* 0x60 corresponds to GT_PCI0M0HD */ 784 stw_p(p++, 0x8422); stw_p(p++, 0x9060); 785 /* sw t0, 0x60(t1) */ 786 787 stw_p(p++, 0x0020); stw_p(p++, 0x00c1); 788 /* addiu[32] t0, $0, 0xc1 */ 789 790 /* 0x80 corresponds to GT_PCI0M1LD */ 791 stw_p(p++, 0x8422); stw_p(p++, 0x9080); 792 /* sw t0, 0x80(t1) */ 793 794 stw_p(p++, 0x0020); stw_p(p++, 0x005e); 795 /* addiu[32] t0, $0, 0x5e */ 796 797 #endif 798 799 /* 0x88 corresponds to GT_PCI0M1HD */ 800 stw_p(p++, 0x8422); stw_p(p++, 0x9088); 801 /* sw t0, 0x88(t1) */ 802 803 stw_p(p++, 0xe320 | NM_HI1(kernel_entry)); 804 805 stw_p(p++, NM_HI2(kernel_entry)); 806 /* lui t9,%hi(kernel_entry) */ 807 808 stw_p(p++, 0x8339); stw_p(p++, NM_LO(kernel_entry)); 809 /* ori t9,t9,%lo(kernel_entry) */ 810 811 stw_p(p++, 0x4bf9); stw_p(p++, 0x0000); 812 /* jalrc t8 */ 813 } 814 815 /* 816 * ROM and pseudo bootloader 817 * 818 * The following code implements a very very simple bootloader. It first 819 * loads the registers a0 to a3 to the values expected by the OS, and 820 * then jump at the kernel address. 821 * 822 * The bootloader should pass the locations of the kernel arguments and 823 * environment variables tables. Those tables contain the 32-bit address 824 * of NULL terminated strings. The environment variables table should be 825 * terminated by a NULL address. 826 * 827 * For a simpler implementation, the number of kernel arguments is fixed 828 * to two (the name of the kernel and the command line), and the two 829 * tables are actually the same one. 830 * 831 * The registers a0 to a3 should contain the following values: 832 * a0 - number of kernel arguments 833 * a1 - 32-bit address of the kernel arguments table 834 * a2 - 32-bit address of the environment variables table 835 * a3 - RAM size in bytes 836 */ 837 static void write_bootloader(uint8_t *base, int64_t run_addr, 838 int64_t kernel_entry) 839 { 840 uint32_t *p; 841 842 /* Small bootloader */ 843 p = (uint32_t *)base; 844 845 stl_p(p++, 0x08000000 | /* j 0x1fc00580 */ 846 ((run_addr + 0x580) & 0x0fffffff) >> 2); 847 stl_p(p++, 0x00000000); /* nop */ 848 849 /* YAMON service vector */ 850 stl_p(base + 0x500, run_addr + 0x0580); /* start: */ 851 stl_p(base + 0x504, run_addr + 0x083c); /* print_count: */ 852 stl_p(base + 0x520, run_addr + 0x0580); /* start: */ 853 stl_p(base + 0x52c, run_addr + 0x0800); /* flush_cache: */ 854 stl_p(base + 0x534, run_addr + 0x0808); /* print: */ 855 stl_p(base + 0x538, run_addr + 0x0800); /* reg_cpu_isr: */ 856 stl_p(base + 0x53c, run_addr + 0x0800); /* unred_cpu_isr: */ 857 stl_p(base + 0x540, run_addr + 0x0800); /* reg_ic_isr: */ 858 stl_p(base + 0x544, run_addr + 0x0800); /* unred_ic_isr: */ 859 stl_p(base + 0x548, run_addr + 0x0800); /* reg_esr: */ 860 stl_p(base + 0x54c, run_addr + 0x0800); /* unreg_esr: */ 861 stl_p(base + 0x550, run_addr + 0x0800); /* getchar: */ 862 stl_p(base + 0x554, run_addr + 0x0800); /* syscon_read: */ 863 864 865 /* Second part of the bootloader */ 866 p = (uint32_t *) (base + 0x580); 867 868 if (semihosting_get_argc()) { 869 /* Preserve a0 content as arguments have been passed */ 870 stl_p(p++, 0x00000000); /* nop */ 871 } else { 872 stl_p(p++, 0x24040002); /* addiu a0, zero, 2 */ 873 } 874 875 /* lui sp, high(ENVP_ADDR) */ 876 stl_p(p++, 0x3c1d0000 | (((ENVP_ADDR - 64) >> 16) & 0xffff)); 877 /* ori sp, sp, low(ENVP_ADDR) */ 878 stl_p(p++, 0x37bd0000 | ((ENVP_ADDR - 64) & 0xffff)); 879 /* lui a1, high(ENVP_ADDR) */ 880 stl_p(p++, 0x3c050000 | ((ENVP_ADDR >> 16) & 0xffff)); 881 /* ori a1, a1, low(ENVP_ADDR) */ 882 stl_p(p++, 0x34a50000 | (ENVP_ADDR & 0xffff)); 883 /* lui a2, high(ENVP_ADDR + 8) */ 884 stl_p(p++, 0x3c060000 | (((ENVP_ADDR + 8) >> 16) & 0xffff)); 885 /* ori a2, a2, low(ENVP_ADDR + 8) */ 886 stl_p(p++, 0x34c60000 | ((ENVP_ADDR + 8) & 0xffff)); 887 /* lui a3, high(ram_low_size) */ 888 stl_p(p++, 0x3c070000 | (loaderparams.ram_low_size >> 16)); 889 /* ori a3, a3, low(ram_low_size) */ 890 stl_p(p++, 0x34e70000 | (loaderparams.ram_low_size & 0xffff)); 891 892 /* Load BAR registers as done by YAMON */ 893 stl_p(p++, 0x3c09b400); /* lui t1, 0xb400 */ 894 895 #ifdef TARGET_WORDS_BIGENDIAN 896 stl_p(p++, 0x3c08df00); /* lui t0, 0xdf00 */ 897 #else 898 stl_p(p++, 0x340800df); /* ori t0, r0, 0x00df */ 899 #endif 900 stl_p(p++, 0xad280068); /* sw t0, 0x0068(t1) */ 901 902 stl_p(p++, 0x3c09bbe0); /* lui t1, 0xbbe0 */ 903 904 #ifdef TARGET_WORDS_BIGENDIAN 905 stl_p(p++, 0x3c08c000); /* lui t0, 0xc000 */ 906 #else 907 stl_p(p++, 0x340800c0); /* ori t0, r0, 0x00c0 */ 908 #endif 909 stl_p(p++, 0xad280048); /* sw t0, 0x0048(t1) */ 910 #ifdef TARGET_WORDS_BIGENDIAN 911 stl_p(p++, 0x3c084000); /* lui t0, 0x4000 */ 912 #else 913 stl_p(p++, 0x34080040); /* ori t0, r0, 0x0040 */ 914 #endif 915 stl_p(p++, 0xad280050); /* sw t0, 0x0050(t1) */ 916 917 #ifdef TARGET_WORDS_BIGENDIAN 918 stl_p(p++, 0x3c088000); /* lui t0, 0x8000 */ 919 #else 920 stl_p(p++, 0x34080080); /* ori t0, r0, 0x0080 */ 921 #endif 922 stl_p(p++, 0xad280058); /* sw t0, 0x0058(t1) */ 923 #ifdef TARGET_WORDS_BIGENDIAN 924 stl_p(p++, 0x3c083f00); /* lui t0, 0x3f00 */ 925 #else 926 stl_p(p++, 0x3408003f); /* ori t0, r0, 0x003f */ 927 #endif 928 stl_p(p++, 0xad280060); /* sw t0, 0x0060(t1) */ 929 930 #ifdef TARGET_WORDS_BIGENDIAN 931 stl_p(p++, 0x3c08c100); /* lui t0, 0xc100 */ 932 #else 933 stl_p(p++, 0x340800c1); /* ori t0, r0, 0x00c1 */ 934 #endif 935 stl_p(p++, 0xad280080); /* sw t0, 0x0080(t1) */ 936 #ifdef TARGET_WORDS_BIGENDIAN 937 stl_p(p++, 0x3c085e00); /* lui t0, 0x5e00 */ 938 #else 939 stl_p(p++, 0x3408005e); /* ori t0, r0, 0x005e */ 940 #endif 941 stl_p(p++, 0xad280088); /* sw t0, 0x0088(t1) */ 942 943 /* Jump to kernel code */ 944 stl_p(p++, 0x3c1f0000 | 945 ((kernel_entry >> 16) & 0xffff)); /* lui ra, high(kernel_entry) */ 946 stl_p(p++, 0x37ff0000 | 947 (kernel_entry & 0xffff)); /* ori ra, ra, low(kernel_entry) */ 948 stl_p(p++, 0x03e00009); /* jalr ra */ 949 stl_p(p++, 0x00000000); /* nop */ 950 951 /* YAMON subroutines */ 952 p = (uint32_t *) (base + 0x800); 953 stl_p(p++, 0x03e00009); /* jalr ra */ 954 stl_p(p++, 0x24020000); /* li v0,0 */ 955 /* 808 YAMON print */ 956 stl_p(p++, 0x03e06821); /* move t5,ra */ 957 stl_p(p++, 0x00805821); /* move t3,a0 */ 958 stl_p(p++, 0x00a05021); /* move t2,a1 */ 959 stl_p(p++, 0x91440000); /* lbu a0,0(t2) */ 960 stl_p(p++, 0x254a0001); /* addiu t2,t2,1 */ 961 stl_p(p++, 0x10800005); /* beqz a0,834 */ 962 stl_p(p++, 0x00000000); /* nop */ 963 stl_p(p++, 0x0ff0021c); /* jal 870 */ 964 stl_p(p++, 0x00000000); /* nop */ 965 stl_p(p++, 0x1000fff9); /* b 814 */ 966 stl_p(p++, 0x00000000); /* nop */ 967 stl_p(p++, 0x01a00009); /* jalr t5 */ 968 stl_p(p++, 0x01602021); /* move a0,t3 */ 969 /* 0x83c YAMON print_count */ 970 stl_p(p++, 0x03e06821); /* move t5,ra */ 971 stl_p(p++, 0x00805821); /* move t3,a0 */ 972 stl_p(p++, 0x00a05021); /* move t2,a1 */ 973 stl_p(p++, 0x00c06021); /* move t4,a2 */ 974 stl_p(p++, 0x91440000); /* lbu a0,0(t2) */ 975 stl_p(p++, 0x0ff0021c); /* jal 870 */ 976 stl_p(p++, 0x00000000); /* nop */ 977 stl_p(p++, 0x254a0001); /* addiu t2,t2,1 */ 978 stl_p(p++, 0x258cffff); /* addiu t4,t4,-1 */ 979 stl_p(p++, 0x1580fffa); /* bnez t4,84c */ 980 stl_p(p++, 0x00000000); /* nop */ 981 stl_p(p++, 0x01a00009); /* jalr t5 */ 982 stl_p(p++, 0x01602021); /* move a0,t3 */ 983 /* 0x870 */ 984 stl_p(p++, 0x3c08b800); /* lui t0,0xb400 */ 985 stl_p(p++, 0x350803f8); /* ori t0,t0,0x3f8 */ 986 stl_p(p++, 0x91090005); /* lbu t1,5(t0) */ 987 stl_p(p++, 0x00000000); /* nop */ 988 stl_p(p++, 0x31290040); /* andi t1,t1,0x40 */ 989 stl_p(p++, 0x1120fffc); /* beqz t1,878 <outch+0x8> */ 990 stl_p(p++, 0x00000000); /* nop */ 991 stl_p(p++, 0x03e00009); /* jalr ra */ 992 stl_p(p++, 0xa1040000); /* sb a0,0(t0) */ 993 994 } 995 996 static void GCC_FMT_ATTR(3, 4) prom_set(uint32_t *prom_buf, int index, 997 const char *string, ...) 998 { 999 va_list ap; 1000 int32_t table_addr; 1001 1002 if (index >= ENVP_NB_ENTRIES) { 1003 return; 1004 } 1005 1006 if (string == NULL) { 1007 prom_buf[index] = 0; 1008 return; 1009 } 1010 1011 table_addr = sizeof(int32_t) * ENVP_NB_ENTRIES + index * ENVP_ENTRY_SIZE; 1012 prom_buf[index] = tswap32(ENVP_ADDR + table_addr); 1013 1014 va_start(ap, string); 1015 vsnprintf((char *)prom_buf + table_addr, ENVP_ENTRY_SIZE, string, ap); 1016 va_end(ap); 1017 } 1018 1019 /* Kernel */ 1020 static int64_t load_kernel(void) 1021 { 1022 int64_t kernel_entry, kernel_high, initrd_size; 1023 long kernel_size; 1024 ram_addr_t initrd_offset; 1025 int big_endian; 1026 uint32_t *prom_buf; 1027 long prom_size; 1028 int prom_index = 0; 1029 uint64_t (*xlate_to_kseg0) (void *opaque, uint64_t addr); 1030 1031 #ifdef TARGET_WORDS_BIGENDIAN 1032 big_endian = 1; 1033 #else 1034 big_endian = 0; 1035 #endif 1036 1037 kernel_size = load_elf(loaderparams.kernel_filename, NULL, 1038 cpu_mips_kseg0_to_phys, NULL, 1039 (uint64_t *)&kernel_entry, NULL, 1040 (uint64_t *)&kernel_high, NULL, big_endian, EM_MIPS, 1041 1, 0); 1042 if (kernel_size < 0) { 1043 error_report("could not load kernel '%s': %s", 1044 loaderparams.kernel_filename, 1045 load_elf_strerror(kernel_size)); 1046 exit(1); 1047 } 1048 1049 /* Check where the kernel has been linked */ 1050 if (kernel_entry & 0x80000000ll) { 1051 if (kvm_enabled()) { 1052 error_report("KVM guest kernels must be linked in useg. " 1053 "Did you forget to enable CONFIG_KVM_GUEST?"); 1054 exit(1); 1055 } 1056 1057 xlate_to_kseg0 = cpu_mips_phys_to_kseg0; 1058 } else { 1059 /* if kernel entry is in useg it is probably a KVM T&E kernel */ 1060 mips_um_ksegs_enable(); 1061 1062 xlate_to_kseg0 = cpu_mips_kvm_um_phys_to_kseg0; 1063 } 1064 1065 /* load initrd */ 1066 initrd_size = 0; 1067 initrd_offset = 0; 1068 if (loaderparams.initrd_filename) { 1069 initrd_size = get_image_size(loaderparams.initrd_filename); 1070 if (initrd_size > 0) { 1071 /* 1072 * The kernel allocates the bootmap memory in the low memory after 1073 * the initrd. It takes at most 128kiB for 2GB RAM and 4kiB 1074 * pages. 1075 */ 1076 initrd_offset = (loaderparams.ram_low_size - initrd_size 1077 - (128 * KiB) 1078 - ~INITRD_PAGE_MASK) & INITRD_PAGE_MASK; 1079 if (kernel_high >= initrd_offset) { 1080 error_report("memory too small for initial ram disk '%s'", 1081 loaderparams.initrd_filename); 1082 exit(1); 1083 } 1084 initrd_size = load_image_targphys(loaderparams.initrd_filename, 1085 initrd_offset, 1086 ram_size - initrd_offset); 1087 } 1088 if (initrd_size == (target_ulong) -1) { 1089 error_report("could not load initial ram disk '%s'", 1090 loaderparams.initrd_filename); 1091 exit(1); 1092 } 1093 } 1094 1095 /* Setup prom parameters. */ 1096 prom_size = ENVP_NB_ENTRIES * (sizeof(int32_t) + ENVP_ENTRY_SIZE); 1097 prom_buf = g_malloc(prom_size); 1098 1099 prom_set(prom_buf, prom_index++, "%s", loaderparams.kernel_filename); 1100 if (initrd_size > 0) { 1101 prom_set(prom_buf, prom_index++, 1102 "rd_start=0x%" PRIx64 " rd_size=%" PRId64 " %s", 1103 xlate_to_kseg0(NULL, initrd_offset), 1104 initrd_size, loaderparams.kernel_cmdline); 1105 } else { 1106 prom_set(prom_buf, prom_index++, "%s", loaderparams.kernel_cmdline); 1107 } 1108 1109 prom_set(prom_buf, prom_index++, "memsize"); 1110 prom_set(prom_buf, prom_index++, "%u", loaderparams.ram_low_size); 1111 1112 prom_set(prom_buf, prom_index++, "ememsize"); 1113 prom_set(prom_buf, prom_index++, "%u", loaderparams.ram_size); 1114 1115 prom_set(prom_buf, prom_index++, "modetty0"); 1116 prom_set(prom_buf, prom_index++, "38400n8r"); 1117 prom_set(prom_buf, prom_index++, NULL); 1118 1119 rom_add_blob_fixed("prom", prom_buf, prom_size, 1120 cpu_mips_kseg0_to_phys(NULL, ENVP_ADDR)); 1121 1122 g_free(prom_buf); 1123 return kernel_entry; 1124 } 1125 1126 static void malta_mips_config(MIPSCPU *cpu) 1127 { 1128 MachineState *ms = MACHINE(qdev_get_machine()); 1129 unsigned int smp_cpus = ms->smp.cpus; 1130 CPUMIPSState *env = &cpu->env; 1131 CPUState *cs = CPU(cpu); 1132 1133 env->mvp->CP0_MVPConf0 |= ((smp_cpus - 1) << CP0MVPC0_PVPE) | 1134 ((smp_cpus * cs->nr_threads - 1) << CP0MVPC0_PTC); 1135 } 1136 1137 static void main_cpu_reset(void *opaque) 1138 { 1139 MIPSCPU *cpu = opaque; 1140 CPUMIPSState *env = &cpu->env; 1141 1142 cpu_reset(CPU(cpu)); 1143 1144 /* 1145 * The bootloader does not need to be rewritten as it is located in a 1146 * read only location. The kernel location and the arguments table 1147 * location does not change. 1148 */ 1149 if (loaderparams.kernel_filename) { 1150 env->CP0_Status &= ~(1 << CP0St_ERL); 1151 } 1152 1153 malta_mips_config(cpu); 1154 1155 if (kvm_enabled()) { 1156 /* Start running from the bootloader we wrote to end of RAM */ 1157 env->active_tc.PC = 0x40000000 + loaderparams.ram_low_size; 1158 } 1159 } 1160 1161 static void create_cpu_without_cps(MachineState *ms, 1162 qemu_irq *cbus_irq, qemu_irq *i8259_irq) 1163 { 1164 CPUMIPSState *env; 1165 MIPSCPU *cpu; 1166 int i; 1167 1168 for (i = 0; i < ms->smp.cpus; i++) { 1169 cpu = MIPS_CPU(cpu_create(ms->cpu_type)); 1170 1171 /* Init internal devices */ 1172 cpu_mips_irq_init_cpu(cpu); 1173 cpu_mips_clock_init(cpu); 1174 qemu_register_reset(main_cpu_reset, cpu); 1175 } 1176 1177 cpu = MIPS_CPU(first_cpu); 1178 env = &cpu->env; 1179 *i8259_irq = env->irq[2]; 1180 *cbus_irq = env->irq[4]; 1181 } 1182 1183 static void create_cps(MachineState *ms, MaltaState *s, 1184 qemu_irq *cbus_irq, qemu_irq *i8259_irq) 1185 { 1186 sysbus_init_child_obj(OBJECT(s), "cps", OBJECT(&s->cps), sizeof(s->cps), 1187 TYPE_MIPS_CPS); 1188 object_property_set_str(OBJECT(&s->cps), ms->cpu_type, "cpu-type", 1189 &error_fatal); 1190 object_property_set_int(OBJECT(&s->cps), ms->smp.cpus, "num-vp", 1191 &error_fatal); 1192 object_property_set_bool(OBJECT(&s->cps), true, "realized", 1193 &error_fatal); 1194 1195 sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->cps), 0, 0, 1); 1196 1197 *i8259_irq = get_cps_irq(&s->cps, 3); 1198 *cbus_irq = NULL; 1199 } 1200 1201 static void mips_create_cpu(MachineState *ms, MaltaState *s, 1202 qemu_irq *cbus_irq, qemu_irq *i8259_irq) 1203 { 1204 if ((ms->smp.cpus > 1) && cpu_supports_cps_smp(ms->cpu_type)) { 1205 create_cps(ms, s, cbus_irq, i8259_irq); 1206 } else { 1207 create_cpu_without_cps(ms, cbus_irq, i8259_irq); 1208 } 1209 } 1210 1211 static 1212 void mips_malta_init(MachineState *machine) 1213 { 1214 ram_addr_t ram_size = machine->ram_size; 1215 ram_addr_t ram_low_size; 1216 const char *kernel_filename = machine->kernel_filename; 1217 const char *kernel_cmdline = machine->kernel_cmdline; 1218 const char *initrd_filename = machine->initrd_filename; 1219 char *filename; 1220 PFlashCFI01 *fl; 1221 MemoryRegion *system_memory = get_system_memory(); 1222 MemoryRegion *ram_low_preio = g_new(MemoryRegion, 1); 1223 MemoryRegion *ram_low_postio; 1224 MemoryRegion *bios, *bios_copy = g_new(MemoryRegion, 1); 1225 const size_t smbus_eeprom_size = 8 * 256; 1226 uint8_t *smbus_eeprom_buf = g_malloc0(smbus_eeprom_size); 1227 int64_t kernel_entry, bootloader_run_addr; 1228 PCIBus *pci_bus; 1229 ISABus *isa_bus; 1230 qemu_irq cbus_irq, i8259_irq; 1231 I2CBus *smbus; 1232 DriveInfo *dinfo; 1233 int fl_idx = 0; 1234 int be; 1235 1236 DeviceState *dev = qdev_create(NULL, TYPE_MIPS_MALTA); 1237 MaltaState *s = MIPS_MALTA(dev); 1238 1239 /* 1240 * The whole address space decoded by the GT-64120A doesn't generate 1241 * exception when accessing invalid memory. Create an empty slot to 1242 * emulate this feature. 1243 */ 1244 empty_slot_init(0, 0x20000000); 1245 1246 qdev_init_nofail(dev); 1247 1248 /* create CPU */ 1249 mips_create_cpu(machine, s, &cbus_irq, &i8259_irq); 1250 1251 /* allocate RAM */ 1252 if (ram_size > 2 * GiB) { 1253 error_report("Too much memory for this machine: %" PRId64 "MB," 1254 " maximum 2048MB", ram_size / MiB); 1255 exit(1); 1256 } 1257 1258 /* register RAM at high address where it is undisturbed by IO */ 1259 memory_region_add_subregion(system_memory, 0x80000000, machine->ram); 1260 1261 /* alias for pre IO hole access */ 1262 memory_region_init_alias(ram_low_preio, NULL, "mips_malta_low_preio.ram", 1263 machine->ram, 0, MIN(ram_size, 256 * MiB)); 1264 memory_region_add_subregion(system_memory, 0, ram_low_preio); 1265 1266 /* alias for post IO hole access, if there is enough RAM */ 1267 if (ram_size > 512 * MiB) { 1268 ram_low_postio = g_new(MemoryRegion, 1); 1269 memory_region_init_alias(ram_low_postio, NULL, 1270 "mips_malta_low_postio.ram", 1271 machine->ram, 512 * MiB, 1272 ram_size - 512 * MiB); 1273 memory_region_add_subregion(system_memory, 512 * MiB, 1274 ram_low_postio); 1275 } 1276 1277 #ifdef TARGET_WORDS_BIGENDIAN 1278 be = 1; 1279 #else 1280 be = 0; 1281 #endif 1282 1283 /* FPGA */ 1284 1285 /* The CBUS UART is attached to the MIPS CPU INT2 pin, ie interrupt 4 */ 1286 malta_fpga_init(system_memory, FPGA_ADDRESS, cbus_irq, serial_hd(2)); 1287 1288 /* Load firmware in flash / BIOS. */ 1289 dinfo = drive_get(IF_PFLASH, 0, fl_idx); 1290 fl = pflash_cfi01_register(FLASH_ADDRESS, "mips_malta.bios", 1291 FLASH_SIZE, 1292 dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, 1293 65536, 1294 4, 0x0000, 0x0000, 0x0000, 0x0000, be); 1295 bios = pflash_cfi01_get_memory(fl); 1296 fl_idx++; 1297 if (kernel_filename) { 1298 ram_low_size = MIN(ram_size, 256 * MiB); 1299 /* For KVM we reserve 1MB of RAM for running bootloader */ 1300 if (kvm_enabled()) { 1301 ram_low_size -= 0x100000; 1302 bootloader_run_addr = 0x40000000 + ram_low_size; 1303 } else { 1304 bootloader_run_addr = 0xbfc00000; 1305 } 1306 1307 /* Write a small bootloader to the flash location. */ 1308 loaderparams.ram_size = ram_size; 1309 loaderparams.ram_low_size = ram_low_size; 1310 loaderparams.kernel_filename = kernel_filename; 1311 loaderparams.kernel_cmdline = kernel_cmdline; 1312 loaderparams.initrd_filename = initrd_filename; 1313 kernel_entry = load_kernel(); 1314 1315 if (!cpu_supports_isa(machine->cpu_type, ISA_NANOMIPS32)) { 1316 write_bootloader(memory_region_get_ram_ptr(bios), 1317 bootloader_run_addr, kernel_entry); 1318 } else { 1319 write_bootloader_nanomips(memory_region_get_ram_ptr(bios), 1320 bootloader_run_addr, kernel_entry); 1321 } 1322 if (kvm_enabled()) { 1323 /* Write the bootloader code @ the end of RAM, 1MB reserved */ 1324 write_bootloader(memory_region_get_ram_ptr(ram_low_preio) + 1325 ram_low_size, 1326 bootloader_run_addr, kernel_entry); 1327 } 1328 } else { 1329 target_long bios_size = FLASH_SIZE; 1330 /* The flash region isn't executable from a KVM guest */ 1331 if (kvm_enabled()) { 1332 error_report("KVM enabled but no -kernel argument was specified. " 1333 "Booting from flash is not supported with KVM."); 1334 exit(1); 1335 } 1336 /* Load firmware from flash. */ 1337 if (!dinfo) { 1338 /* Load a BIOS image. */ 1339 if (bios_name == NULL) { 1340 bios_name = BIOS_FILENAME; 1341 } 1342 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); 1343 if (filename) { 1344 bios_size = load_image_targphys(filename, FLASH_ADDRESS, 1345 BIOS_SIZE); 1346 g_free(filename); 1347 } else { 1348 bios_size = -1; 1349 } 1350 if ((bios_size < 0 || bios_size > BIOS_SIZE) && 1351 !kernel_filename && !qtest_enabled()) { 1352 error_report("Could not load MIPS bios '%s', and no " 1353 "-kernel argument was specified", bios_name); 1354 exit(1); 1355 } 1356 } 1357 /* 1358 * In little endian mode the 32bit words in the bios are swapped, 1359 * a neat trick which allows bi-endian firmware. 1360 */ 1361 #ifndef TARGET_WORDS_BIGENDIAN 1362 { 1363 uint32_t *end, *addr; 1364 const size_t swapsize = MIN(bios_size, 0x3e0000); 1365 addr = rom_ptr(FLASH_ADDRESS, swapsize); 1366 if (!addr) { 1367 addr = memory_region_get_ram_ptr(bios); 1368 } 1369 end = (void *)addr + swapsize; 1370 while (addr < end) { 1371 bswap32s(addr); 1372 addr++; 1373 } 1374 } 1375 #endif 1376 } 1377 1378 /* 1379 * Map the BIOS at a 2nd physical location, as on the real board. 1380 * Copy it so that we can patch in the MIPS revision, which cannot be 1381 * handled by an overlapping region as the resulting ROM code subpage 1382 * regions are not executable. 1383 */ 1384 memory_region_init_ram(bios_copy, NULL, "bios.1fc", BIOS_SIZE, 1385 &error_fatal); 1386 if (!rom_copy(memory_region_get_ram_ptr(bios_copy), 1387 FLASH_ADDRESS, BIOS_SIZE)) { 1388 memcpy(memory_region_get_ram_ptr(bios_copy), 1389 memory_region_get_ram_ptr(bios), BIOS_SIZE); 1390 } 1391 memory_region_set_readonly(bios_copy, true); 1392 memory_region_add_subregion(system_memory, RESET_ADDRESS, bios_copy); 1393 1394 /* Board ID = 0x420 (Malta Board with CoreLV) */ 1395 stl_p(memory_region_get_ram_ptr(bios_copy) + 0x10, 0x00000420); 1396 1397 /* Northbridge */ 1398 pci_bus = gt64120_register(s->i8259); 1399 1400 /* Southbridge */ 1401 dev = piix4_create(pci_bus, &isa_bus, &smbus); 1402 1403 /* Interrupt controller */ 1404 qdev_connect_gpio_out_named(dev, "intr", 0, i8259_irq); 1405 for (int i = 0; i < ISA_NUM_IRQS; i++) { 1406 s->i8259[i] = qdev_get_gpio_in_named(dev, "isa", i); 1407 } 1408 1409 /* generate SPD EEPROM data */ 1410 generate_eeprom_spd(&smbus_eeprom_buf[0 * 256], ram_size); 1411 generate_eeprom_serial(&smbus_eeprom_buf[6 * 256]); 1412 smbus_eeprom_init(smbus, 8, smbus_eeprom_buf, smbus_eeprom_size); 1413 g_free(smbus_eeprom_buf); 1414 1415 /* Super I/O: SMS FDC37M817 */ 1416 isa_create_simple(isa_bus, TYPE_FDC37M81X_SUPERIO); 1417 1418 /* Network card */ 1419 network_init(pci_bus); 1420 1421 /* Optional PCI video card */ 1422 pci_vga_init(pci_bus); 1423 } 1424 1425 static const TypeInfo mips_malta_device = { 1426 .name = TYPE_MIPS_MALTA, 1427 .parent = TYPE_SYS_BUS_DEVICE, 1428 .instance_size = sizeof(MaltaState), 1429 }; 1430 1431 static void mips_malta_machine_init(MachineClass *mc) 1432 { 1433 mc->desc = "MIPS Malta Core LV"; 1434 mc->init = mips_malta_init; 1435 mc->block_default_type = IF_IDE; 1436 mc->max_cpus = 16; 1437 mc->is_default = true; 1438 #ifdef TARGET_MIPS64 1439 mc->default_cpu_type = MIPS_CPU_TYPE_NAME("20Kc"); 1440 #else 1441 mc->default_cpu_type = MIPS_CPU_TYPE_NAME("24Kf"); 1442 #endif 1443 mc->default_ram_id = "mips_malta.ram"; 1444 } 1445 1446 DEFINE_MACHINE("malta", mips_malta_machine_init) 1447 1448 static void mips_malta_register_types(void) 1449 { 1450 type_register_static(&mips_malta_device); 1451 } 1452 1453 type_init(mips_malta_register_types) 1454