xref: /openbmc/qemu/hw/mips/loongson3_virt.c (revision 7619129f)
1 /*
2  * Generic Loongson-3 Platform support
3  *
4  * Copyright (c) 2018-2020 Huacai Chen (chenhc@lemote.com)
5  * Copyright (c) 2018-2020 Jiaxun Yang <jiaxun.yang@flygoat.com>
6  *
7  * This program is free software: you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation, either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program. If not, see <https://www.gnu.org/licenses/>.
19  */
20 
21 /*
22  * Generic virtualized PC Platform based on Loongson-3 CPU (MIPS64R2 with
23  * extensions, 800~2000MHz)
24  */
25 
26 #include "qemu/osdep.h"
27 #include "qemu/units.h"
28 #include "qemu/cutils.h"
29 #include "qemu/datadir.h"
30 #include "qapi/error.h"
31 #include "elf.h"
32 #include "hw/char/serial.h"
33 #include "hw/intc/loongson_liointc.h"
34 #include "hw/mips/mips.h"
35 #include "hw/mips/fw_cfg.h"
36 #include "hw/mips/loongson3_bootp.h"
37 #include "hw/misc/unimp.h"
38 #include "hw/intc/i8259.h"
39 #include "hw/intc/loongson_ipi.h"
40 #include "hw/loader.h"
41 #include "hw/isa/superio.h"
42 #include "hw/pci/msi.h"
43 #include "hw/pci/pci.h"
44 #include "hw/pci/pci_host.h"
45 #include "hw/pci-host/gpex.h"
46 #include "hw/usb.h"
47 #include "net/net.h"
48 #include "sysemu/kvm.h"
49 #include "sysemu/qtest.h"
50 #include "sysemu/reset.h"
51 #include "sysemu/runstate.h"
52 #include "qemu/error-report.h"
53 
54 #define PM_CNTL_MODE          0x10
55 
56 #define LOONGSON_MAX_VCPUS      16
57 
58 /*
59  * Loongson-3's virtual machine BIOS can be obtained here:
60  * 1, https://github.com/loongson-community/firmware-nonfree
61  * 2, http://dev.lemote.com:8000/files/firmware/UEFI/KVM/bios_loongson3.bin
62  */
63 #define LOONGSON3_BIOSNAME "bios_loongson3.bin"
64 
65 #define UART_IRQ            0
66 #define RTC_IRQ             1
67 #define PCIE_IRQ_BASE       2
68 
69 const MemMapEntry virt_memmap[] = {
70     [VIRT_LOWMEM] =      { 0x00000000,    0x10000000 },
71     [VIRT_PM] =          { 0x10080000,         0x100 },
72     [VIRT_FW_CFG] =      { 0x10080100,         0x100 },
73     [VIRT_RTC] =         { 0x10081000,        0x1000 },
74     [VIRT_PCIE_PIO] =    { 0x18000000,       0x80000 },
75     [VIRT_PCIE_ECAM] =   { 0x1a000000,     0x2000000 },
76     [VIRT_BIOS_ROM] =    { 0x1fc00000,      0x200000 },
77     [VIRT_UART] =        { 0x1fe001e0,           0x8 },
78     [VIRT_IPI] =         { 0x3ff01000,         0x400 },
79     [VIRT_LIOINTC] =     { 0x3ff01400,          0x64 },
80     [VIRT_PCIE_MMIO] =   { 0x40000000,    0x40000000 },
81     [VIRT_HIGHMEM] =     { 0x80000000,           0x0 }, /* Variable */
82 };
83 
84 static const MemMapEntry loader_memmap[] = {
85     [LOADER_KERNEL] =    { 0x00000000,     0x4000000 },
86     [LOADER_INITRD] =    { 0x04000000,           0x0 }, /* Variable */
87     [LOADER_CMDLINE] =   { 0x0ff00000,      0x100000 },
88 };
89 
90 static const MemMapEntry loader_rommap[] = {
91     [LOADER_BOOTROM] =   { 0x1fc00000,        0x1000 },
92     [LOADER_PARAM] =     { 0x1fc01000,       0x10000 },
93 };
94 
95 struct LoongsonMachineState {
96     MachineState parent_obj;
97     MemoryRegion *pio_alias;
98     MemoryRegion *mmio_alias;
99     MemoryRegion *ecam_alias;
100 };
101 typedef struct LoongsonMachineState LoongsonMachineState;
102 
103 #define TYPE_LOONGSON_MACHINE  MACHINE_TYPE_NAME("loongson3-virt")
104 DECLARE_INSTANCE_CHECKER(LoongsonMachineState, LOONGSON_MACHINE, TYPE_LOONGSON_MACHINE)
105 
106 static struct _loaderparams {
107     uint64_t cpu_freq;
108     uint64_t ram_size;
109     const char *kernel_cmdline;
110     const char *kernel_filename;
111     const char *initrd_filename;
112     uint64_t kernel_entry;
113     uint64_t a0, a1, a2;
114 } loaderparams;
115 
116 static uint64_t loongson3_pm_read(void *opaque, hwaddr addr, unsigned size)
117 {
118     return 0;
119 }
120 
121 static void loongson3_pm_write(void *opaque, hwaddr addr,
122                                uint64_t val, unsigned size)
123 {
124     if (addr != PM_CNTL_MODE) {
125         return;
126     }
127 
128     switch (val) {
129     case 0x00:
130         qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
131         return;
132     case 0x01:
133         qemu_system_suspend_request();
134         return;
135     case 0xff:
136         qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
137         return;
138     default:
139         return;
140     }
141 }
142 
143 static const MemoryRegionOps loongson3_pm_ops = {
144     .read  = loongson3_pm_read,
145     .write = loongson3_pm_write,
146     .endianness = DEVICE_NATIVE_ENDIAN,
147     .valid = {
148         .min_access_size = 1,
149         .max_access_size = 1
150     }
151 };
152 
153 #define DEF_LOONGSON3_FREQ (800 * 1000 * 1000)
154 
155 static uint64_t get_cpu_freq_hz(void)
156 {
157 #ifdef CONFIG_KVM
158     int ret;
159     uint64_t freq;
160     struct kvm_one_reg freq_reg = {
161         .id = KVM_REG_MIPS_COUNT_HZ,
162         .addr = (uintptr_t)(&freq)
163     };
164 
165     if (kvm_enabled()) {
166         ret = kvm_vcpu_ioctl(first_cpu, KVM_GET_ONE_REG, &freq_reg);
167         if (ret >= 0) {
168             return freq * 2;
169         }
170     }
171 #endif
172     return DEF_LOONGSON3_FREQ;
173 }
174 
175 static void init_boot_param(void)
176 {
177     static void *p;
178     struct boot_params *bp;
179 
180     p = g_malloc0(loader_rommap[LOADER_PARAM].size);
181     bp = p;
182 
183     bp->efi.smbios.vers = cpu_to_le16(1);
184     init_reset_system(&(bp->reset_system));
185     p += ROUND_UP(sizeof(struct boot_params), 64);
186     init_loongson_params(&(bp->efi.smbios.lp), p,
187                          loaderparams.cpu_freq, loaderparams.ram_size);
188 
189     rom_add_blob_fixed("params_rom", bp,
190                        loader_rommap[LOADER_PARAM].size,
191                        loader_rommap[LOADER_PARAM].base);
192 
193     g_free(bp);
194 
195     loaderparams.a2 = cpu_mips_phys_to_kseg0(NULL,
196                                              loader_rommap[LOADER_PARAM].base);
197 }
198 
199 static void init_boot_rom(void)
200 {
201     const unsigned int boot_code[] = {
202         0x40086000,   /* mfc0    t0, CP0_STATUS                               */
203         0x240900E4,   /* li      t1, 0xe4         #set kx, sx, ux, erl        */
204         0x01094025,   /* or      t0, t0, t1                                   */
205         0x3C090040,   /* lui     t1, 0x40         #set bev                    */
206         0x01094025,   /* or      t0, t0, t1                                   */
207         0x40886000,   /* mtc0    t0, CP0_STATUS                               */
208         0x00000000,
209         0x40806800,   /* mtc0    zero, CP0_CAUSE                              */
210         0x00000000,
211         0x400A7801,   /* mfc0    t2, $15, 1                                   */
212         0x314A00FF,   /* andi    t2, 0x0ff                                    */
213         0x3C089000,   /* dli     t0, 0x900000003ff01000                       */
214         0x00084438,
215         0x35083FF0,
216         0x00084438,
217         0x35081000,
218         0x314B0003,   /* andi    t3, t2, 0x3      #local cpuid                */
219         0x000B5A00,   /* sll     t3, 8                                        */
220         0x010B4025,   /* or      t0, t0, t3                                   */
221         0x314C000C,   /* andi    t4, t2, 0xc      #node id                    */
222         0x000C62BC,   /* dsll    t4, 42                                       */
223         0x010C4025,   /* or      t0, t0, t4                                   */
224                       /* WaitForInit:                                         */
225         0xDD020020,   /* ld      v0, FN_OFF(t0)   #FN_OFF 0x020               */
226         0x1040FFFE,   /* beqz    v0, WaitForInit                              */
227         0x00000000,   /* nop                                                  */
228         0xDD1D0028,   /* ld      sp, SP_OFF(t0)   #FN_OFF 0x028               */
229         0xDD1C0030,   /* ld      gp, GP_OFF(t0)   #FN_OFF 0x030               */
230         0xDD050038,   /* ld      a1, A1_OFF(t0)   #FN_OFF 0x038               */
231         0x00400008,   /* jr      v0               #byebye                     */
232         0x00000000,   /* nop                                                  */
233         0x1000FFFF,   /* 1:  b   1b                                           */
234         0x00000000,   /* nop                                                  */
235 
236                       /* Reset                                                */
237         0x3C0C9000,   /* dli     t0, 0x9000000010080010                       */
238         0x358C0000,
239         0x000C6438,
240         0x358C1008,
241         0x000C6438,
242         0x358C0010,
243         0x240D0000,   /* li      t1, 0x00                                     */
244         0xA18D0000,   /* sb      t1, (t0)                                     */
245         0x1000FFFF,   /* 1:  b   1b                                           */
246         0x00000000,   /* nop                                                  */
247 
248                       /* Shutdown                                             */
249         0x3C0C9000,   /* dli     t0, 0x9000000010080010                       */
250         0x358C0000,
251         0x000C6438,
252         0x358C1008,
253         0x000C6438,
254         0x358C0010,
255         0x240D00FF,   /* li      t1, 0xff                                     */
256         0xA18D0000,   /* sb      t1, (t0)                                     */
257         0x1000FFFF,   /* 1:  b   1b                                           */
258         0x00000000,   /* nop                                                  */
259                       /* Suspend                                              */
260         0x3C0C9000,   /* dli     t0, 0x9000000010080010                       */
261         0x358C0000,
262         0x000C6438,
263         0x358C1008,
264         0x000C6438,
265         0x358C0010,
266         0x240D0001,   /* li      t1, 0x01                                     */
267         0xA18D0000,   /* sb      t1, (t0)                                     */
268         0x03e00008,   /* jr      ra                                           */
269         0x00000000    /* nop                                                  */
270     };
271 
272     rom_add_blob_fixed("boot_rom", boot_code, sizeof(boot_code),
273                        loader_rommap[LOADER_BOOTROM].base);
274 }
275 
276 static void fw_cfg_boot_set(void *opaque, const char *boot_device,
277                             Error **errp)
278 {
279     fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
280 }
281 
282 static void fw_conf_init(unsigned long ram_size)
283 {
284     static const uint8_t suspend[6] = {128, 0, 0, 129, 128, 128};
285     FWCfgState *fw_cfg;
286     hwaddr cfg_addr = virt_memmap[VIRT_FW_CFG].base;
287 
288     fw_cfg = fw_cfg_init_mem_wide(cfg_addr, cfg_addr + 8, 8, 0, NULL);
289     fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)current_machine->smp.cpus);
290     fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)current_machine->smp.max_cpus);
291     fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
292     fw_cfg_add_i32(fw_cfg, FW_CFG_MACHINE_VERSION, 1);
293     fw_cfg_add_i64(fw_cfg, FW_CFG_CPU_FREQ, get_cpu_freq_hz());
294 
295     fw_cfg_add_file(fw_cfg, "etc/system-states",
296                     g_memdup2(suspend, sizeof(suspend)), sizeof(suspend));
297 
298     qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
299 }
300 
301 static int set_prom_cmdline(ram_addr_t initrd_offset, long initrd_size)
302 {
303     int ret = 0;
304     void *cmdline_buf;
305     hwaddr cmdline_vaddr;
306     unsigned int *parg_env;
307 
308     /* Allocate cmdline_buf for command line. */
309     cmdline_buf = g_malloc0(loader_memmap[LOADER_CMDLINE].size);
310     cmdline_vaddr = cpu_mips_phys_to_kseg0(NULL,
311                                            loader_memmap[LOADER_CMDLINE].base);
312 
313     /*
314      * Layout of cmdline_buf looks like this:
315      * argv[0], argv[1], 0, env[0], env[1], ... env[i], 0,
316      * argv[0]'s data, argv[1]'s data, env[0]'data, ..., env[i]'s data, 0
317      */
318     parg_env = (void *)cmdline_buf;
319 
320     ret = (3 + 1) * 4;
321     *parg_env++ = cmdline_vaddr + ret;
322     ret += (1 + snprintf(cmdline_buf + ret, 256 - ret, "g"));
323 
324     /* argv1 */
325     *parg_env++ = cmdline_vaddr + ret;
326     if (initrd_size > 0)
327         ret += (1 + snprintf(cmdline_buf + ret, 256 - ret,
328                 "rd_start=0x" TARGET_FMT_lx " rd_size=%li %s",
329                 cpu_mips_phys_to_kseg0(NULL, initrd_offset),
330                 initrd_size, loaderparams.kernel_cmdline));
331     else
332         ret += (1 + snprintf(cmdline_buf + ret, 256 - ret, "%s",
333                 loaderparams.kernel_cmdline));
334 
335     /* argv2 */
336     *parg_env++ = cmdline_vaddr + 4 * ret;
337 
338     rom_add_blob_fixed("cmdline", cmdline_buf,
339                        loader_memmap[LOADER_CMDLINE].size,
340                        loader_memmap[LOADER_CMDLINE].base);
341 
342     g_free(cmdline_buf);
343 
344     loaderparams.a0 = 2;
345     loaderparams.a1 = cmdline_vaddr;
346 
347     return 0;
348 }
349 
350 static uint64_t load_kernel(CPUMIPSState *env)
351 {
352     long kernel_size;
353     ram_addr_t initrd_offset;
354     uint64_t kernel_entry, kernel_low, kernel_high, initrd_size;
355 
356     kernel_size = load_elf(loaderparams.kernel_filename, NULL,
357                            cpu_mips_kseg0_to_phys, NULL,
358                            (uint64_t *)&kernel_entry,
359                            (uint64_t *)&kernel_low, (uint64_t *)&kernel_high,
360                            NULL, 0, EM_MIPS, 1, 0);
361     if (kernel_size < 0) {
362         error_report("could not load kernel '%s': %s",
363                      loaderparams.kernel_filename,
364                      load_elf_strerror(kernel_size));
365         exit(1);
366     }
367 
368     /* load initrd */
369     initrd_size = 0;
370     initrd_offset = 0;
371     if (loaderparams.initrd_filename) {
372         initrd_size = get_image_size(loaderparams.initrd_filename);
373         if (initrd_size > 0) {
374             initrd_offset = MAX(loader_memmap[LOADER_INITRD].base,
375                                 ROUND_UP(kernel_high, INITRD_PAGE_SIZE));
376 
377             if (initrd_offset + initrd_size > loaderparams.ram_size) {
378                 error_report("memory too small for initial ram disk '%s'",
379                              loaderparams.initrd_filename);
380                 exit(1);
381             }
382 
383             initrd_size = load_image_targphys(loaderparams.initrd_filename,
384                                               initrd_offset,
385                                               loaderparams.ram_size - initrd_offset);
386         }
387 
388         if (initrd_size == (target_ulong) -1) {
389             error_report("could not load initial ram disk '%s'",
390                          loaderparams.initrd_filename);
391             exit(1);
392         }
393     }
394 
395     /* Setup prom cmdline. */
396     set_prom_cmdline(initrd_offset, initrd_size);
397 
398     return kernel_entry;
399 }
400 
401 static void main_cpu_reset(void *opaque)
402 {
403     MIPSCPU *cpu = opaque;
404     CPUMIPSState *env = &cpu->env;
405 
406     cpu_reset(CPU(cpu));
407 
408     /* Loongson-3 reset stuff */
409     if (loaderparams.kernel_filename) {
410         if (cpu == MIPS_CPU(first_cpu)) {
411             env->active_tc.gpr[4] = loaderparams.a0;
412             env->active_tc.gpr[5] = loaderparams.a1;
413             env->active_tc.gpr[6] = loaderparams.a2;
414             env->active_tc.PC = loaderparams.kernel_entry;
415         }
416         env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL));
417     }
418 }
419 
420 static inline void loongson3_virt_devices_init(MachineState *machine,
421                                                DeviceState *pic)
422 {
423     int i;
424     qemu_irq irq;
425     PCIBus *pci_bus;
426     DeviceState *dev;
427     MemoryRegion *mmio_reg, *ecam_reg;
428     MachineClass *mc = MACHINE_GET_CLASS(machine);
429     LoongsonMachineState *s = LOONGSON_MACHINE(machine);
430 
431     dev = qdev_new(TYPE_GPEX_HOST);
432     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
433     pci_bus = PCI_HOST_BRIDGE(dev)->bus;
434 
435     s->ecam_alias = g_new0(MemoryRegion, 1);
436     ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
437     memory_region_init_alias(s->ecam_alias, OBJECT(dev), "pcie-ecam",
438                              ecam_reg, 0, virt_memmap[VIRT_PCIE_ECAM].size);
439     memory_region_add_subregion(get_system_memory(),
440                                 virt_memmap[VIRT_PCIE_ECAM].base,
441                                 s->ecam_alias);
442 
443     s->mmio_alias = g_new0(MemoryRegion, 1);
444     mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
445     memory_region_init_alias(s->mmio_alias, OBJECT(dev), "pcie-mmio",
446                              mmio_reg, virt_memmap[VIRT_PCIE_MMIO].base,
447                              virt_memmap[VIRT_PCIE_MMIO].size);
448     memory_region_add_subregion(get_system_memory(),
449                                 virt_memmap[VIRT_PCIE_MMIO].base,
450                                 s->mmio_alias);
451 
452     s->pio_alias = g_new0(MemoryRegion, 1);
453     memory_region_init_alias(s->pio_alias, OBJECT(dev), "pcie-pio",
454                              get_system_io(), 0,
455                              virt_memmap[VIRT_PCIE_PIO].size);
456     memory_region_add_subregion(get_system_memory(),
457                                 virt_memmap[VIRT_PCIE_PIO].base, s->pio_alias);
458     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, virt_memmap[VIRT_PCIE_PIO].base);
459 
460     for (i = 0; i < GPEX_NUM_IRQS; i++) {
461         irq = qdev_get_gpio_in(pic, PCIE_IRQ_BASE + i);
462         sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq);
463         gpex_set_irq_num(GPEX_HOST(dev), i, PCIE_IRQ_BASE + i);
464     }
465     msi_nonbroken = true;
466 
467     pci_vga_init(pci_bus);
468 
469     if (defaults_enabled() && object_class_by_name("pci-ohci")) {
470         USBBus *usb_bus;
471 
472         pci_create_simple(pci_bus, -1, "pci-ohci");
473         usb_bus = USB_BUS(object_resolve_type_unambiguous(TYPE_USB_BUS,
474                                                           &error_abort));
475         usb_create_simple(usb_bus, "usb-kbd");
476         usb_create_simple(usb_bus, "usb-tablet");
477     }
478 
479     pci_init_nic_devices(pci_bus, mc->default_nic);
480 }
481 
482 static void mips_loongson3_virt_init(MachineState *machine)
483 {
484     int i;
485     long bios_size;
486     MIPSCPU *cpu;
487     Clock *cpuclk;
488     CPUMIPSState *env;
489     DeviceState *liointc;
490     DeviceState *ipi = NULL;
491     char *filename;
492     const char *kernel_cmdline = machine->kernel_cmdline;
493     const char *kernel_filename = machine->kernel_filename;
494     const char *initrd_filename = machine->initrd_filename;
495     ram_addr_t ram_size = machine->ram_size;
496     MemoryRegion *address_space_mem = get_system_memory();
497     MemoryRegion *ram = g_new(MemoryRegion, 1);
498     MemoryRegion *bios = g_new(MemoryRegion, 1);
499     MemoryRegion *iomem = g_new(MemoryRegion, 1);
500     MemoryRegion *iocsr = g_new(MemoryRegion, 1);
501 
502     /* TODO: TCG will support all CPU types */
503     if (!kvm_enabled()) {
504         if (!machine->cpu_type) {
505             machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A1000");
506         }
507         if (!cpu_type_supports_isa(machine->cpu_type, INSN_LOONGSON3A)) {
508             error_report("Loongson-3/TCG needs a Loongson-3 series cpu");
509             exit(1);
510         }
511     } else {
512         if (!machine->cpu_type) {
513             machine->cpu_type = MIPS_CPU_TYPE_NAME("Loongson-3A4000");
514         }
515         if (!strstr(machine->cpu_type, "Loongson-3A4000")) {
516             error_report("Loongson-3/KVM needs cpu type Loongson-3A4000");
517             exit(1);
518         }
519     }
520 
521     if (ram_size < 512 * MiB) {
522         error_report("Loongson-3 machine needs at least 512MB memory");
523         exit(1);
524     }
525 
526     /*
527      * The whole MMIO range among configure registers doesn't generate
528      * exception when accessing invalid memory. Create some unimplememted
529      * devices to emulate this feature.
530      */
531     create_unimplemented_device("mmio fallback 0", 0x10000000, 256 * MiB);
532     create_unimplemented_device("mmio fallback 1", 0x30000000, 256 * MiB);
533 
534     memory_region_init(iocsr, OBJECT(machine), "loongson3.iocsr", UINT32_MAX);
535 
536     /* IPI controller is in kernel for KVM */
537     if (!kvm_enabled()) {
538         ipi = qdev_new(TYPE_LOONGSON_IPI);
539         qdev_prop_set_uint32(ipi, "num-cpu", machine->smp.cpus);
540         sysbus_realize_and_unref(SYS_BUS_DEVICE(ipi), &error_fatal);
541         memory_region_add_subregion(iocsr, SMP_IPI_MAILBOX,
542                                 sysbus_mmio_get_region(SYS_BUS_DEVICE(ipi), 0));
543         memory_region_add_subregion(iocsr, MAIL_SEND_ADDR,
544                                 sysbus_mmio_get_region(SYS_BUS_DEVICE(ipi), 1));
545     }
546 
547     liointc = qdev_new("loongson.liointc");
548     sysbus_realize_and_unref(SYS_BUS_DEVICE(liointc), &error_fatal);
549 
550     sysbus_mmio_map(SYS_BUS_DEVICE(liointc), 0, virt_memmap[VIRT_LIOINTC].base);
551 
552     serial_mm_init(address_space_mem, virt_memmap[VIRT_UART].base, 0,
553                    qdev_get_gpio_in(liointc, UART_IRQ), 115200, serial_hd(0),
554                    DEVICE_NATIVE_ENDIAN);
555 
556     sysbus_create_simple("goldfish_rtc", virt_memmap[VIRT_RTC].base,
557                          qdev_get_gpio_in(liointc, RTC_IRQ));
558 
559     cpuclk = clock_new(OBJECT(machine), "cpu-refclk");
560     clock_set_hz(cpuclk, DEF_LOONGSON3_FREQ);
561 
562     for (i = 0; i < machine->smp.cpus; i++) {
563         int node = i / LOONGSON3_CORE_PER_NODE;
564         int core = i % LOONGSON3_CORE_PER_NODE;
565         int ip;
566 
567         /* init CPUs */
568         cpu = mips_cpu_create_with_clock(machine->cpu_type, cpuclk);
569 
570         /* Init internal devices */
571         cpu_mips_irq_init_cpu(cpu);
572         cpu_mips_clock_init(cpu);
573         qemu_register_reset(main_cpu_reset, cpu);
574 
575         if (ipi) {
576             hwaddr base = ((hwaddr)node << 44) + virt_memmap[VIRT_IPI].base;
577             base += core * 0x100;
578             qdev_connect_gpio_out(ipi, i, cpu->env.irq[6]);
579             sysbus_mmio_map(SYS_BUS_DEVICE(ipi), i + 2, base);
580         }
581 
582         if (ase_lcsr_available(&MIPS_CPU(cpu)->env)) {
583             MemoryRegion *core_iocsr = g_new(MemoryRegion, 1);
584             g_autofree char *name = g_strdup_printf("core%d_iocsr", i);
585             memory_region_init_alias(core_iocsr, OBJECT(cpu), name,
586                                      iocsr, 0, UINT32_MAX);
587             memory_region_add_subregion(&MIPS_CPU(cpu)->env.iocsr.mr,
588                                         0, core_iocsr);
589         }
590 
591         if (node > 0) {
592             continue; /* Only node-0 can be connected to LIOINTC */
593         }
594 
595         for (ip = 0; ip < 4 ; ip++) {
596             int pin = core * LOONGSON3_CORE_PER_NODE + ip;
597             sysbus_connect_irq(SYS_BUS_DEVICE(liointc),
598                                pin, cpu->env.irq[ip + 2]);
599         }
600     }
601     env = &MIPS_CPU(first_cpu)->env;
602 
603     /* Allocate RAM/BIOS, 0x00000000~0x10000000 is alias of 0x80000000~0x90000000 */
604     memory_region_init_rom(bios, NULL, "loongson3.bios",
605                            virt_memmap[VIRT_BIOS_ROM].size, &error_fatal);
606     memory_region_init_alias(ram, NULL, "loongson3.lowmem",
607                            machine->ram, 0, virt_memmap[VIRT_LOWMEM].size);
608     memory_region_init_io(iomem, NULL, &loongson3_pm_ops,
609                            NULL, "loongson3_pm", virt_memmap[VIRT_PM].size);
610     qemu_register_wakeup_support();
611 
612     memory_region_add_subregion(address_space_mem,
613                       virt_memmap[VIRT_LOWMEM].base, ram);
614     memory_region_add_subregion(address_space_mem,
615                       virt_memmap[VIRT_BIOS_ROM].base, bios);
616     memory_region_add_subregion(address_space_mem,
617                       virt_memmap[VIRT_HIGHMEM].base, machine->ram);
618     memory_region_add_subregion(address_space_mem,
619                       virt_memmap[VIRT_PM].base, iomem);
620 
621     /*
622      * We do not support flash operation, just loading bios.bin as raw BIOS.
623      * Please use -L to set the BIOS path and -bios to set bios name.
624      */
625 
626     if (kernel_filename) {
627         loaderparams.cpu_freq = get_cpu_freq_hz();
628         loaderparams.ram_size = ram_size;
629         loaderparams.kernel_filename = kernel_filename;
630         loaderparams.kernel_cmdline = kernel_cmdline;
631         loaderparams.initrd_filename = initrd_filename;
632         loaderparams.kernel_entry = load_kernel(env);
633 
634         init_boot_rom();
635         init_boot_param();
636     } else {
637         filename = qemu_find_file(QEMU_FILE_TYPE_BIOS,
638                                   machine->firmware ?: LOONGSON3_BIOSNAME);
639         if (filename) {
640             bios_size = load_image_targphys(filename,
641                                             virt_memmap[VIRT_BIOS_ROM].base,
642                                             virt_memmap[VIRT_BIOS_ROM].size);
643             g_free(filename);
644         } else {
645             bios_size = -1;
646         }
647 
648         if ((bios_size < 0 || bios_size > virt_memmap[VIRT_BIOS_ROM].size) &&
649             !kernel_filename && !qtest_enabled()) {
650             error_report("Could not load MIPS bios '%s'", machine->firmware);
651             exit(1);
652         }
653 
654         fw_conf_init(ram_size);
655     }
656 
657     loongson3_virt_devices_init(machine, liointc);
658 }
659 
660 static void loongson3v_machine_class_init(ObjectClass *oc, void *data)
661 {
662     MachineClass *mc = MACHINE_CLASS(oc);
663 
664     mc->desc = "Loongson-3 Virtualization Platform";
665     mc->init = mips_loongson3_virt_init;
666     mc->block_default_type = IF_IDE;
667     mc->max_cpus = LOONGSON_MAX_VCPUS;
668     mc->default_ram_id = "loongson3.highram";
669     mc->default_ram_size = 1600 * MiB;
670     mc->minimum_page_bits = 14;
671     mc->default_nic = "virtio-net-pci";
672 }
673 
674 static const TypeInfo loongson3_machine_types[] = {
675     {
676         .name           = TYPE_LOONGSON_MACHINE,
677         .parent         = TYPE_MACHINE,
678         .instance_size  = sizeof(LoongsonMachineState),
679         .class_init     = loongson3v_machine_class_init,
680     }
681 };
682 
683 DEFINE_TYPES(loongson3_machine_types)
684