1 /*
2  * Model of Petalogix linux reference design targeting Xilinx Spartan 3ADSP-1800
3  * boards.
4  *
5  * Copyright (c) 2009 Edgar E. Iglesias.
6  *
7  * Permission is hereby granted, free of charge, to any person obtaining a copy
8  * of this software and associated documentation files (the "Software"), to deal
9  * in the Software without restriction, including without limitation the rights
10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11  * copies of the Software, and to permit persons to whom the Software is
12  * furnished to do so, subject to the following conditions:
13  *
14  * The above copyright notice and this permission notice shall be included in
15  * all copies or substantial portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23  * THE SOFTWARE.
24  */
25 
26 #include "qemu/osdep.h"
27 #include "qemu/units.h"
28 #include "qapi/error.h"
29 #include "qemu-common.h"
30 #include "cpu.h"
31 #include "hw/sysbus.h"
32 #include "hw/hw.h"
33 #include "net/net.h"
34 #include "hw/block/flash.h"
35 #include "sysemu/sysemu.h"
36 #include "hw/devices.h"
37 #include "hw/boards.h"
38 #include "exec/address-spaces.h"
39 #include "hw/char/xilinx_uartlite.h"
40 
41 #include "boot.h"
42 
43 #define LMB_BRAM_SIZE  (128 * KiB)
44 #define FLASH_SIZE     (16 * MiB)
45 
46 #define BINARY_DEVICE_TREE_FILE "petalogix-s3adsp1800.dtb"
47 
48 #define MEMORY_BASEADDR 0x90000000
49 #define FLASH_BASEADDR 0xa0000000
50 #define INTC_BASEADDR 0x81800000
51 #define TIMER_BASEADDR 0x83c00000
52 #define UARTLITE_BASEADDR 0x84000000
53 #define ETHLITE_BASEADDR 0x81000000
54 
55 #define TIMER_IRQ           0
56 #define ETHLITE_IRQ         1
57 #define UARTLITE_IRQ        3
58 
59 static void
60 petalogix_s3adsp1800_init(MachineState *machine)
61 {
62     ram_addr_t ram_size = machine->ram_size;
63     DeviceState *dev;
64     MicroBlazeCPU *cpu;
65     DriveInfo *dinfo;
66     int i;
67     hwaddr ddr_base = MEMORY_BASEADDR;
68     MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
69     MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
70     qemu_irq irq[32];
71     MemoryRegion *sysmem = get_system_memory();
72 
73     cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
74     object_property_set_str(OBJECT(cpu), "7.10.d", "version", &error_abort);
75     object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
76 
77     /* Attach emulated BRAM through the LMB.  */
78     memory_region_init_ram(phys_lmb_bram, NULL,
79                            "petalogix_s3adsp1800.lmb_bram", LMB_BRAM_SIZE,
80                            &error_fatal);
81     memory_region_add_subregion(sysmem, 0x00000000, phys_lmb_bram);
82 
83     memory_region_init_ram(phys_ram, NULL, "petalogix_s3adsp1800.ram",
84                            ram_size, &error_fatal);
85     memory_region_add_subregion(sysmem, ddr_base, phys_ram);
86 
87     dinfo = drive_get(IF_PFLASH, 0, 0);
88     pflash_cfi01_register(FLASH_BASEADDR,
89                           NULL, "petalogix_s3adsp1800.flash", FLASH_SIZE,
90                           dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
91                           64 * KiB, FLASH_SIZE >> 16,
92                           1, 0x89, 0x18, 0x0000, 0x0, 1);
93 
94     dev = qdev_create(NULL, "xlnx.xps-intc");
95     qdev_prop_set_uint32(dev, "kind-of-intr",
96                          1 << ETHLITE_IRQ | 1 << UARTLITE_IRQ);
97     qdev_init_nofail(dev);
98     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
99     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
100                        qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
101     for (i = 0; i < 32; i++) {
102         irq[i] = qdev_get_gpio_in(dev, i);
103     }
104 
105     xilinx_uartlite_create(UARTLITE_BASEADDR, irq[UARTLITE_IRQ],
106                            serial_hd(0));
107 
108     /* 2 timers at irq 2 @ 62 Mhz.  */
109     dev = qdev_create(NULL, "xlnx.xps-timer");
110     qdev_prop_set_uint32(dev, "one-timer-only", 0);
111     qdev_prop_set_uint32(dev, "clock-frequency", 62 * 1000000);
112     qdev_init_nofail(dev);
113     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
114     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
115 
116     qemu_check_nic_model(&nd_table[0], "xlnx.xps-ethernetlite");
117     dev = qdev_create(NULL, "xlnx.xps-ethernetlite");
118     qdev_set_nic_properties(dev, &nd_table[0]);
119     qdev_prop_set_uint32(dev, "tx-ping-pong", 0);
120     qdev_prop_set_uint32(dev, "rx-ping-pong", 0);
121     qdev_init_nofail(dev);
122     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, ETHLITE_BASEADDR);
123     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[ETHLITE_IRQ]);
124 
125     microblaze_load_kernel(cpu, ddr_base, ram_size,
126                            machine->initrd_filename,
127                            BINARY_DEVICE_TREE_FILE,
128                            NULL);
129 }
130 
131 static void petalogix_s3adsp1800_machine_init(MachineClass *mc)
132 {
133     mc->desc = "PetaLogix linux refdesign for xilinx Spartan 3ADSP1800";
134     mc->init = petalogix_s3adsp1800_init;
135     mc->is_default = 1;
136 }
137 
138 DEFINE_MACHINE("petalogix-s3adsp1800", petalogix_s3adsp1800_machine_init)
139