1 /* 2 * Model of Petalogix linux reference design targeting Xilinx Spartan ml605 3 * board. 4 * 5 * Copyright (c) 2011 Michal Simek <monstr@monstr.eu> 6 * Copyright (c) 2011 PetaLogix 7 * Copyright (c) 2009 Edgar E. Iglesias. 8 * 9 * Permission is hereby granted, free of charge, to any person obtaining a copy 10 * of this software and associated documentation files (the "Software"), to deal 11 * in the Software without restriction, including without limitation the rights 12 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 13 * copies of the Software, and to permit persons to whom the Software is 14 * furnished to do so, subject to the following conditions: 15 * 16 * The above copyright notice and this permission notice shall be included in 17 * all copies or substantial portions of the Software. 18 * 19 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 20 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 21 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 22 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 23 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 24 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 25 * THE SOFTWARE. 26 */ 27 28 #include "qemu/osdep.h" 29 #include "qemu/units.h" 30 #include "qapi/error.h" 31 #include "qemu-common.h" 32 #include "cpu.h" 33 #include "hw/sysbus.h" 34 #include "hw/hw.h" 35 #include "net/net.h" 36 #include "hw/block/flash.h" 37 #include "sysemu/sysemu.h" 38 #include "hw/boards.h" 39 #include "hw/char/serial.h" 40 #include "exec/address-spaces.h" 41 #include "hw/ssi/ssi.h" 42 43 #include "boot.h" 44 45 #include "hw/stream.h" 46 47 #define LMB_BRAM_SIZE (128 * KiB) 48 #define FLASH_SIZE (32 * MiB) 49 50 #define BINARY_DEVICE_TREE_FILE "petalogix-ml605.dtb" 51 52 #define NUM_SPI_FLASHES 4 53 54 #define SPI_BASEADDR 0x40a00000 55 #define MEMORY_BASEADDR 0x50000000 56 #define FLASH_BASEADDR 0x86000000 57 #define INTC_BASEADDR 0x81800000 58 #define TIMER_BASEADDR 0x83c00000 59 #define UART16550_BASEADDR 0x83e00000 60 #define AXIENET_BASEADDR 0x82780000 61 #define AXIDMA_BASEADDR 0x84600000 62 63 #define AXIDMA_IRQ1 0 64 #define AXIDMA_IRQ0 1 65 #define TIMER_IRQ 2 66 #define AXIENET_IRQ 3 67 #define SPI_IRQ 4 68 #define UART16550_IRQ 5 69 70 static void 71 petalogix_ml605_init(MachineState *machine) 72 { 73 ram_addr_t ram_size = machine->ram_size; 74 MemoryRegion *address_space_mem = get_system_memory(); 75 DeviceState *dev, *dma, *eth0; 76 Object *ds, *cs; 77 MicroBlazeCPU *cpu; 78 SysBusDevice *busdev; 79 DriveInfo *dinfo; 80 int i; 81 MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1); 82 MemoryRegion *phys_ram = g_new(MemoryRegion, 1); 83 qemu_irq irq[32]; 84 85 /* init CPUs */ 86 cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU)); 87 object_property_set_str(OBJECT(cpu), "8.10.a", "version", &error_abort); 88 /* Use FPU but don't use floating point conversion and square 89 * root instructions 90 */ 91 object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort); 92 object_property_set_bool(OBJECT(cpu), true, "dcache-writeback", 93 &error_abort); 94 object_property_set_bool(OBJECT(cpu), true, "endianness", &error_abort); 95 object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort); 96 97 /* Attach emulated BRAM through the LMB. */ 98 memory_region_init_ram(phys_lmb_bram, NULL, "petalogix_ml605.lmb_bram", 99 LMB_BRAM_SIZE, &error_fatal); 100 memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram); 101 102 memory_region_init_ram(phys_ram, NULL, "petalogix_ml605.ram", ram_size, 103 &error_fatal); 104 memory_region_add_subregion(address_space_mem, MEMORY_BASEADDR, phys_ram); 105 106 dinfo = drive_get(IF_PFLASH, 0, 0); 107 /* 5th parameter 2 means bank-width 108 * 10th paremeter 0 means little-endian */ 109 pflash_cfi01_register(FLASH_BASEADDR, 110 NULL, "petalogix_ml605.flash", FLASH_SIZE, 111 dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, 112 64 * KiB, FLASH_SIZE >> 16, 113 2, 0x89, 0x18, 0x0000, 0x0, 0); 114 115 116 dev = qdev_create(NULL, "xlnx.xps-intc"); 117 qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ); 118 qdev_init_nofail(dev); 119 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR); 120 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, 121 qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ)); 122 for (i = 0; i < 32; i++) { 123 irq[i] = qdev_get_gpio_in(dev, i); 124 } 125 126 serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2, 127 irq[UART16550_IRQ], 115200, serial_hd(0), 128 DEVICE_LITTLE_ENDIAN); 129 130 /* 2 timers at irq 2 @ 100 Mhz. */ 131 dev = qdev_create(NULL, "xlnx.xps-timer"); 132 qdev_prop_set_uint32(dev, "one-timer-only", 0); 133 qdev_prop_set_uint32(dev, "clock-frequency", 100 * 1000000); 134 qdev_init_nofail(dev); 135 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR); 136 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]); 137 138 /* axi ethernet and dma initialization. */ 139 qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet"); 140 eth0 = qdev_create(NULL, "xlnx.axi-ethernet"); 141 dma = qdev_create(NULL, "xlnx.axi-dma"); 142 143 /* FIXME: attach to the sysbus instead */ 144 object_property_add_child(qdev_get_machine(), "xilinx-eth", OBJECT(eth0), 145 NULL); 146 object_property_add_child(qdev_get_machine(), "xilinx-dma", OBJECT(dma), 147 NULL); 148 149 ds = object_property_get_link(OBJECT(dma), 150 "axistream-connected-target", NULL); 151 cs = object_property_get_link(OBJECT(dma), 152 "axistream-control-connected-target", NULL); 153 qdev_set_nic_properties(eth0, &nd_table[0]); 154 qdev_prop_set_uint32(eth0, "rxmem", 0x1000); 155 qdev_prop_set_uint32(eth0, "txmem", 0x1000); 156 object_property_set_link(OBJECT(eth0), OBJECT(ds), 157 "axistream-connected", &error_abort); 158 object_property_set_link(OBJECT(eth0), OBJECT(cs), 159 "axistream-control-connected", &error_abort); 160 qdev_init_nofail(eth0); 161 sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR); 162 sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]); 163 164 ds = object_property_get_link(OBJECT(eth0), 165 "axistream-connected-target", NULL); 166 cs = object_property_get_link(OBJECT(eth0), 167 "axistream-control-connected-target", NULL); 168 qdev_prop_set_uint32(dma, "freqhz", 100 * 1000000); 169 object_property_set_link(OBJECT(dma), OBJECT(ds), 170 "axistream-connected", &error_abort); 171 object_property_set_link(OBJECT(dma), OBJECT(cs), 172 "axistream-control-connected", &error_abort); 173 qdev_init_nofail(dma); 174 sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, AXIDMA_BASEADDR); 175 sysbus_connect_irq(SYS_BUS_DEVICE(dma), 0, irq[AXIDMA_IRQ0]); 176 sysbus_connect_irq(SYS_BUS_DEVICE(dma), 1, irq[AXIDMA_IRQ1]); 177 178 { 179 SSIBus *spi; 180 181 dev = qdev_create(NULL, "xlnx.xps-spi"); 182 qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES); 183 qdev_init_nofail(dev); 184 busdev = SYS_BUS_DEVICE(dev); 185 sysbus_mmio_map(busdev, 0, SPI_BASEADDR); 186 sysbus_connect_irq(busdev, 0, irq[SPI_IRQ]); 187 188 spi = (SSIBus *)qdev_get_child_bus(dev, "spi"); 189 190 for (i = 0; i < NUM_SPI_FLASHES; i++) { 191 DriveInfo *dinfo = drive_get_next(IF_MTD); 192 qemu_irq cs_line; 193 194 dev = ssi_create_slave_no_init(spi, "n25q128"); 195 if (dinfo) { 196 qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo), 197 &error_fatal); 198 } 199 qdev_init_nofail(dev); 200 201 cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0); 202 sysbus_connect_irq(busdev, i+1, cs_line); 203 } 204 } 205 206 /* setup PVR to match kernel settings */ 207 cpu->env.pvr.regs[4] = 0xc56b8000; 208 cpu->env.pvr.regs[5] = 0xc56be000; 209 cpu->env.pvr.regs[10] = 0x0e000000; /* virtex 6 */ 210 211 microblaze_load_kernel(cpu, MEMORY_BASEADDR, ram_size, 212 machine->initrd_filename, 213 BINARY_DEVICE_TREE_FILE, 214 NULL); 215 216 } 217 218 static void petalogix_ml605_machine_init(MachineClass *mc) 219 { 220 mc->desc = "PetaLogix linux refdesign for xilinx ml605 little endian"; 221 mc->init = petalogix_ml605_init; 222 mc->is_default = 0; 223 } 224 225 DEFINE_MACHINE("petalogix-ml605", petalogix_ml605_machine_init) 226