1 /*
2  * Model of Petalogix linux reference design targeting Xilinx Spartan ml605
3  * board.
4  *
5  * Copyright (c) 2011 Michal Simek <monstr@monstr.eu>
6  * Copyright (c) 2011 PetaLogix
7  * Copyright (c) 2009 Edgar E. Iglesias.
8  *
9  * Permission is hereby granted, free of charge, to any person obtaining a copy
10  * of this software and associated documentation files (the "Software"), to deal
11  * in the Software without restriction, including without limitation the rights
12  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
13  * copies of the Software, and to permit persons to whom the Software is
14  * furnished to do so, subject to the following conditions:
15  *
16  * The above copyright notice and this permission notice shall be included in
17  * all copies or substantial portions of the Software.
18  *
19  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
20  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
21  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
22  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
23  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
24  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
25  * THE SOFTWARE.
26  */
27 
28 #include "qemu/osdep.h"
29 #include "qemu/units.h"
30 #include "qapi/error.h"
31 #include "qemu-common.h"
32 #include "cpu.h"
33 #include "hw/sysbus.h"
34 #include "hw/hw.h"
35 #include "net/net.h"
36 #include "hw/block/flash.h"
37 #include "sysemu/sysemu.h"
38 #include "hw/devices.h"
39 #include "hw/boards.h"
40 #include "hw/char/serial.h"
41 #include "exec/address-spaces.h"
42 #include "hw/ssi/ssi.h"
43 
44 #include "boot.h"
45 
46 #include "hw/stream.h"
47 
48 #define LMB_BRAM_SIZE  (128 * KiB)
49 #define FLASH_SIZE     (32 * MiB)
50 
51 #define BINARY_DEVICE_TREE_FILE "petalogix-ml605.dtb"
52 
53 #define NUM_SPI_FLASHES 4
54 
55 #define SPI_BASEADDR 0x40a00000
56 #define MEMORY_BASEADDR 0x50000000
57 #define FLASH_BASEADDR 0x86000000
58 #define INTC_BASEADDR 0x81800000
59 #define TIMER_BASEADDR 0x83c00000
60 #define UART16550_BASEADDR 0x83e00000
61 #define AXIENET_BASEADDR 0x82780000
62 #define AXIDMA_BASEADDR 0x84600000
63 
64 #define AXIDMA_IRQ1         0
65 #define AXIDMA_IRQ0         1
66 #define TIMER_IRQ           2
67 #define AXIENET_IRQ         3
68 #define SPI_IRQ             4
69 #define UART16550_IRQ       5
70 
71 static void
72 petalogix_ml605_init(MachineState *machine)
73 {
74     ram_addr_t ram_size = machine->ram_size;
75     MemoryRegion *address_space_mem = get_system_memory();
76     DeviceState *dev, *dma, *eth0;
77     Object *ds, *cs;
78     MicroBlazeCPU *cpu;
79     SysBusDevice *busdev;
80     DriveInfo *dinfo;
81     int i;
82     MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
83     MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
84     qemu_irq irq[32];
85 
86     /* init CPUs */
87     cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
88     object_property_set_str(OBJECT(cpu), "8.10.a", "version", &error_abort);
89     /* Use FPU but don't use floating point conversion and square
90      * root instructions
91      */
92     object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
93     object_property_set_bool(OBJECT(cpu), true, "dcache-writeback",
94                              &error_abort);
95     object_property_set_bool(OBJECT(cpu), true, "endianness", &error_abort);
96     object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
97 
98     /* Attach emulated BRAM through the LMB.  */
99     memory_region_init_ram(phys_lmb_bram, NULL, "petalogix_ml605.lmb_bram",
100                            LMB_BRAM_SIZE, &error_fatal);
101     memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);
102 
103     memory_region_init_ram(phys_ram, NULL, "petalogix_ml605.ram", ram_size,
104                            &error_fatal);
105     memory_region_add_subregion(address_space_mem, MEMORY_BASEADDR, phys_ram);
106 
107     dinfo = drive_get(IF_PFLASH, 0, 0);
108     /* 5th parameter 2 means bank-width
109      * 10th paremeter 0 means little-endian */
110     pflash_cfi01_register(FLASH_BASEADDR,
111                           NULL, "petalogix_ml605.flash", FLASH_SIZE,
112                           dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
113                           64 * KiB, FLASH_SIZE >> 16,
114                           2, 0x89, 0x18, 0x0000, 0x0, 0);
115 
116 
117     dev = qdev_create(NULL, "xlnx.xps-intc");
118     qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ);
119     qdev_init_nofail(dev);
120     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
121     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
122                        qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
123     for (i = 0; i < 32; i++) {
124         irq[i] = qdev_get_gpio_in(dev, i);
125     }
126 
127     serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
128                    irq[UART16550_IRQ], 115200, serial_hd(0),
129                    DEVICE_LITTLE_ENDIAN);
130 
131     /* 2 timers at irq 2 @ 100 Mhz.  */
132     dev = qdev_create(NULL, "xlnx.xps-timer");
133     qdev_prop_set_uint32(dev, "one-timer-only", 0);
134     qdev_prop_set_uint32(dev, "clock-frequency", 100 * 1000000);
135     qdev_init_nofail(dev);
136     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
137     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
138 
139     /* axi ethernet and dma initialization. */
140     qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet");
141     eth0 = qdev_create(NULL, "xlnx.axi-ethernet");
142     dma = qdev_create(NULL, "xlnx.axi-dma");
143 
144     /* FIXME: attach to the sysbus instead */
145     object_property_add_child(qdev_get_machine(), "xilinx-eth", OBJECT(eth0),
146                               NULL);
147     object_property_add_child(qdev_get_machine(), "xilinx-dma", OBJECT(dma),
148                               NULL);
149 
150     ds = object_property_get_link(OBJECT(dma),
151                                   "axistream-connected-target", NULL);
152     cs = object_property_get_link(OBJECT(dma),
153                                   "axistream-control-connected-target", NULL);
154     qdev_set_nic_properties(eth0, &nd_table[0]);
155     qdev_prop_set_uint32(eth0, "rxmem", 0x1000);
156     qdev_prop_set_uint32(eth0, "txmem", 0x1000);
157     object_property_set_link(OBJECT(eth0), OBJECT(ds),
158                              "axistream-connected", &error_abort);
159     object_property_set_link(OBJECT(eth0), OBJECT(cs),
160                              "axistream-control-connected", &error_abort);
161     qdev_init_nofail(eth0);
162     sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR);
163     sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]);
164 
165     ds = object_property_get_link(OBJECT(eth0),
166                                   "axistream-connected-target", NULL);
167     cs = object_property_get_link(OBJECT(eth0),
168                                   "axistream-control-connected-target", NULL);
169     qdev_prop_set_uint32(dma, "freqhz", 100 * 1000000);
170     object_property_set_link(OBJECT(dma), OBJECT(ds),
171                              "axistream-connected", &error_abort);
172     object_property_set_link(OBJECT(dma), OBJECT(cs),
173                              "axistream-control-connected", &error_abort);
174     qdev_init_nofail(dma);
175     sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, AXIDMA_BASEADDR);
176     sysbus_connect_irq(SYS_BUS_DEVICE(dma), 0, irq[AXIDMA_IRQ0]);
177     sysbus_connect_irq(SYS_BUS_DEVICE(dma), 1, irq[AXIDMA_IRQ1]);
178 
179     {
180         SSIBus *spi;
181 
182         dev = qdev_create(NULL, "xlnx.xps-spi");
183         qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES);
184         qdev_init_nofail(dev);
185         busdev = SYS_BUS_DEVICE(dev);
186         sysbus_mmio_map(busdev, 0, SPI_BASEADDR);
187         sysbus_connect_irq(busdev, 0, irq[SPI_IRQ]);
188 
189         spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
190 
191         for (i = 0; i < NUM_SPI_FLASHES; i++) {
192             DriveInfo *dinfo = drive_get_next(IF_MTD);
193             qemu_irq cs_line;
194 
195             dev = ssi_create_slave_no_init(spi, "n25q128");
196             if (dinfo) {
197                 qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo),
198                                     &error_fatal);
199             }
200             qdev_init_nofail(dev);
201 
202             cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
203             sysbus_connect_irq(busdev, i+1, cs_line);
204         }
205     }
206 
207     /* setup PVR to match kernel settings */
208     cpu->env.pvr.regs[4] = 0xc56b8000;
209     cpu->env.pvr.regs[5] = 0xc56be000;
210     cpu->env.pvr.regs[10] = 0x0e000000; /* virtex 6 */
211 
212     microblaze_load_kernel(cpu, MEMORY_BASEADDR, ram_size,
213                            machine->initrd_filename,
214                            BINARY_DEVICE_TREE_FILE,
215                            NULL);
216 
217 }
218 
219 static void petalogix_ml605_machine_init(MachineClass *mc)
220 {
221     mc->desc = "PetaLogix linux refdesign for xilinx ml605 little endian";
222     mc->init = petalogix_ml605_init;
223     mc->is_default = 0;
224 }
225 
226 DEFINE_MACHINE("petalogix-ml605", petalogix_ml605_machine_init)
227