xref: /openbmc/qemu/hw/m68k/mcf5208.c (revision 80adf54e)
1 /*
2  * Motorola ColdFire MCF5208 SoC emulation.
3  *
4  * Copyright (c) 2007 CodeSourcery.
5  *
6  * This code is licensed under the GPL
7  */
8 #include "qemu/osdep.h"
9 #include "qapi/error.h"
10 #include "qemu-common.h"
11 #include "cpu.h"
12 #include "hw/hw.h"
13 #include "hw/m68k/mcf.h"
14 #include "hw/m68k/mcf_fec.h"
15 #include "qemu/timer.h"
16 #include "hw/ptimer.h"
17 #include "sysemu/sysemu.h"
18 #include "sysemu/qtest.h"
19 #include "net/net.h"
20 #include "hw/boards.h"
21 #include "hw/loader.h"
22 #include "hw/sysbus.h"
23 #include "elf.h"
24 #include "exec/address-spaces.h"
25 
26 #define SYS_FREQ 166666666
27 
28 #define PCSR_EN         0x0001
29 #define PCSR_RLD        0x0002
30 #define PCSR_PIF        0x0004
31 #define PCSR_PIE        0x0008
32 #define PCSR_OVW        0x0010
33 #define PCSR_DBG        0x0020
34 #define PCSR_DOZE       0x0040
35 #define PCSR_PRE_SHIFT  8
36 #define PCSR_PRE_MASK   0x0f00
37 
38 typedef struct {
39     MemoryRegion iomem;
40     qemu_irq irq;
41     ptimer_state *timer;
42     uint16_t pcsr;
43     uint16_t pmr;
44     uint16_t pcntr;
45 } m5208_timer_state;
46 
47 static void m5208_timer_update(m5208_timer_state *s)
48 {
49     if ((s->pcsr & (PCSR_PIE | PCSR_PIF)) == (PCSR_PIE | PCSR_PIF))
50         qemu_irq_raise(s->irq);
51     else
52         qemu_irq_lower(s->irq);
53 }
54 
55 static void m5208_timer_write(void *opaque, hwaddr offset,
56                               uint64_t value, unsigned size)
57 {
58     m5208_timer_state *s = (m5208_timer_state *)opaque;
59     int prescale;
60     int limit;
61     switch (offset) {
62     case 0:
63         /* The PIF bit is set-to-clear.  */
64         if (value & PCSR_PIF) {
65             s->pcsr &= ~PCSR_PIF;
66             value &= ~PCSR_PIF;
67         }
68         /* Avoid frobbing the timer if we're just twiddling IRQ bits. */
69         if (((s->pcsr ^ value) & ~PCSR_PIE) == 0) {
70             s->pcsr = value;
71             m5208_timer_update(s);
72             return;
73         }
74 
75         if (s->pcsr & PCSR_EN)
76             ptimer_stop(s->timer);
77 
78         s->pcsr = value;
79 
80         prescale = 1 << ((s->pcsr & PCSR_PRE_MASK) >> PCSR_PRE_SHIFT);
81         ptimer_set_freq(s->timer, (SYS_FREQ / 2) / prescale);
82         if (s->pcsr & PCSR_RLD)
83             limit = s->pmr;
84         else
85             limit = 0xffff;
86         ptimer_set_limit(s->timer, limit, 0);
87 
88         if (s->pcsr & PCSR_EN)
89             ptimer_run(s->timer, 0);
90         break;
91     case 2:
92         s->pmr = value;
93         s->pcsr &= ~PCSR_PIF;
94         if ((s->pcsr & PCSR_RLD) == 0) {
95             if (s->pcsr & PCSR_OVW)
96                 ptimer_set_count(s->timer, value);
97         } else {
98             ptimer_set_limit(s->timer, value, s->pcsr & PCSR_OVW);
99         }
100         break;
101     case 4:
102         break;
103     default:
104         hw_error("m5208_timer_write: Bad offset 0x%x\n", (int)offset);
105         break;
106     }
107     m5208_timer_update(s);
108 }
109 
110 static void m5208_timer_trigger(void *opaque)
111 {
112     m5208_timer_state *s = (m5208_timer_state *)opaque;
113     s->pcsr |= PCSR_PIF;
114     m5208_timer_update(s);
115 }
116 
117 static uint64_t m5208_timer_read(void *opaque, hwaddr addr,
118                                  unsigned size)
119 {
120     m5208_timer_state *s = (m5208_timer_state *)opaque;
121     switch (addr) {
122     case 0:
123         return s->pcsr;
124     case 2:
125         return s->pmr;
126     case 4:
127         return ptimer_get_count(s->timer);
128     default:
129         hw_error("m5208_timer_read: Bad offset 0x%x\n", (int)addr);
130         return 0;
131     }
132 }
133 
134 static const MemoryRegionOps m5208_timer_ops = {
135     .read = m5208_timer_read,
136     .write = m5208_timer_write,
137     .endianness = DEVICE_NATIVE_ENDIAN,
138 };
139 
140 static uint64_t m5208_sys_read(void *opaque, hwaddr addr,
141                                unsigned size)
142 {
143     switch (addr) {
144     case 0x110: /* SDCS0 */
145         {
146             int n;
147             for (n = 0; n < 32; n++) {
148                 if (ram_size < (2u << n))
149                     break;
150             }
151             return (n - 1)  | 0x40000000;
152         }
153     case 0x114: /* SDCS1 */
154         return 0;
155 
156     default:
157         hw_error("m5208_sys_read: Bad offset 0x%x\n", (int)addr);
158         return 0;
159     }
160 }
161 
162 static void m5208_sys_write(void *opaque, hwaddr addr,
163                             uint64_t value, unsigned size)
164 {
165     hw_error("m5208_sys_write: Bad offset 0x%x\n", (int)addr);
166 }
167 
168 static const MemoryRegionOps m5208_sys_ops = {
169     .read = m5208_sys_read,
170     .write = m5208_sys_write,
171     .endianness = DEVICE_NATIVE_ENDIAN,
172 };
173 
174 static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic)
175 {
176     MemoryRegion *iomem = g_new(MemoryRegion, 1);
177     m5208_timer_state *s;
178     QEMUBH *bh;
179     int i;
180 
181     /* SDRAMC.  */
182     memory_region_init_io(iomem, NULL, &m5208_sys_ops, NULL, "m5208-sys", 0x00004000);
183     memory_region_add_subregion(address_space, 0xfc0a8000, iomem);
184     /* Timers.  */
185     for (i = 0; i < 2; i++) {
186         s = (m5208_timer_state *)g_malloc0(sizeof(m5208_timer_state));
187         bh = qemu_bh_new(m5208_timer_trigger, s);
188         s->timer = ptimer_init(bh, PTIMER_POLICY_DEFAULT);
189         memory_region_init_io(&s->iomem, NULL, &m5208_timer_ops, s,
190                               "m5208-timer", 0x00004000);
191         memory_region_add_subregion(address_space, 0xfc080000 + 0x4000 * i,
192                                     &s->iomem);
193         s->irq = pic[4 + i];
194     }
195 }
196 
197 static void mcf_fec_init(MemoryRegion *sysmem, NICInfo *nd, hwaddr base,
198                          qemu_irq *irqs)
199 {
200     DeviceState *dev;
201     SysBusDevice *s;
202     int i;
203 
204     qemu_check_nic_model(nd, TYPE_MCF_FEC_NET);
205     dev = qdev_create(NULL, TYPE_MCF_FEC_NET);
206     qdev_set_nic_properties(dev, nd);
207     qdev_init_nofail(dev);
208 
209     s = SYS_BUS_DEVICE(dev);
210     for (i = 0; i < FEC_NUM_IRQ; i++) {
211         sysbus_connect_irq(s, i, irqs[i]);
212     }
213 
214     memory_region_add_subregion(sysmem, base, sysbus_mmio_get_region(s, 0));
215 }
216 
217 static void mcf5208evb_init(MachineState *machine)
218 {
219     ram_addr_t ram_size = machine->ram_size;
220     const char *cpu_model = machine->cpu_model;
221     const char *kernel_filename = machine->kernel_filename;
222     M68kCPU *cpu;
223     CPUM68KState *env;
224     int kernel_size;
225     uint64_t elf_entry;
226     hwaddr entry;
227     qemu_irq *pic;
228     MemoryRegion *address_space_mem = get_system_memory();
229     MemoryRegion *ram = g_new(MemoryRegion, 1);
230     MemoryRegion *sram = g_new(MemoryRegion, 1);
231 
232     if (!cpu_model) {
233         cpu_model = "m5208";
234     }
235     cpu = cpu_m68k_init(cpu_model);
236     if (!cpu) {
237         fprintf(stderr, "Unable to find m68k CPU definition\n");
238         exit(1);
239     }
240     env = &cpu->env;
241 
242     /* Initialize CPU registers.  */
243     env->vbr = 0;
244     /* TODO: Configure BARs.  */
245 
246     /* DRAM at 0x40000000 */
247     memory_region_allocate_system_memory(ram, NULL, "mcf5208.ram", ram_size);
248     memory_region_add_subregion(address_space_mem, 0x40000000, ram);
249 
250     /* Internal SRAM.  */
251     memory_region_init_ram(sram, NULL, "mcf5208.sram", 16384, &error_fatal);
252     memory_region_add_subregion(address_space_mem, 0x80000000, sram);
253 
254     /* Internal peripherals.  */
255     pic = mcf_intc_init(address_space_mem, 0xfc048000, cpu);
256 
257     mcf_uart_mm_init(0xfc060000, pic[26], serial_hds[0]);
258     mcf_uart_mm_init(0xfc064000, pic[27], serial_hds[1]);
259     mcf_uart_mm_init(0xfc068000, pic[28], serial_hds[2]);
260 
261     mcf5208_sys_init(address_space_mem, pic);
262 
263     if (nb_nics > 1) {
264         fprintf(stderr, "Too many NICs\n");
265         exit(1);
266     }
267     if (nd_table[0].used) {
268         mcf_fec_init(address_space_mem, &nd_table[0],
269                      0xfc030000, pic + 36);
270     }
271 
272     /*  0xfc000000 SCM.  */
273     /*  0xfc004000 XBS.  */
274     /*  0xfc008000 FlexBus CS.  */
275     /* 0xfc030000 FEC.  */
276     /*  0xfc040000 SCM + Power management.  */
277     /*  0xfc044000 eDMA.  */
278     /* 0xfc048000 INTC.  */
279     /*  0xfc058000 I2C.  */
280     /*  0xfc05c000 QSPI.  */
281     /* 0xfc060000 UART0.  */
282     /* 0xfc064000 UART0.  */
283     /* 0xfc068000 UART0.  */
284     /*  0xfc070000 DMA timers.  */
285     /* 0xfc080000 PIT0.  */
286     /* 0xfc084000 PIT1.  */
287     /*  0xfc088000 EPORT.  */
288     /*  0xfc08c000 Watchdog.  */
289     /*  0xfc090000 clock module.  */
290     /*  0xfc0a0000 CCM + reset.  */
291     /*  0xfc0a4000 GPIO.  */
292     /* 0xfc0a8000 SDRAM controller.  */
293 
294     /* Load kernel.  */
295     if (!kernel_filename) {
296         if (qtest_enabled()) {
297             return;
298         }
299         fprintf(stderr, "Kernel image must be specified\n");
300         exit(1);
301     }
302 
303     kernel_size = load_elf(kernel_filename, NULL, NULL, &elf_entry,
304                            NULL, NULL, 1, EM_68K, 0, 0);
305     entry = elf_entry;
306     if (kernel_size < 0) {
307         kernel_size = load_uimage(kernel_filename, &entry, NULL, NULL,
308                                   NULL, NULL);
309     }
310     if (kernel_size < 0) {
311         kernel_size = load_image_targphys(kernel_filename, 0x40000000,
312                                           ram_size);
313         entry = 0x40000000;
314     }
315     if (kernel_size < 0) {
316         fprintf(stderr, "qemu: could not load kernel '%s'\n", kernel_filename);
317         exit(1);
318     }
319 
320     env->pc = entry;
321 }
322 
323 static void mcf5208evb_machine_init(MachineClass *mc)
324 {
325     mc->desc = "MCF5206EVB";
326     mc->init = mcf5208evb_init;
327     mc->is_default = 1;
328 }
329 
330 DEFINE_MACHINE("mcf5208evb", mcf5208evb_machine_init)
331