xref: /openbmc/qemu/hw/m68k/mcf5208.c (revision 1d4bfc54)
1 /*
2  * Motorola ColdFire MCF5208 SoC emulation.
3  *
4  * Copyright (c) 2007 CodeSourcery.
5  *
6  * This code is licensed under the GPL
7  */
8 #include "qemu/osdep.h"
9 #include "qemu/error-report.h"
10 #include "qapi/error.h"
11 #include "qemu-common.h"
12 #include "cpu.h"
13 #include "hw/hw.h"
14 #include "hw/m68k/mcf.h"
15 #include "hw/m68k/mcf_fec.h"
16 #include "qemu/timer.h"
17 #include "hw/ptimer.h"
18 #include "sysemu/sysemu.h"
19 #include "sysemu/qtest.h"
20 #include "net/net.h"
21 #include "hw/boards.h"
22 #include "hw/loader.h"
23 #include "hw/sysbus.h"
24 #include "elf.h"
25 #include "exec/address-spaces.h"
26 
27 #define SYS_FREQ 166666666
28 
29 #define PCSR_EN         0x0001
30 #define PCSR_RLD        0x0002
31 #define PCSR_PIF        0x0004
32 #define PCSR_PIE        0x0008
33 #define PCSR_OVW        0x0010
34 #define PCSR_DBG        0x0020
35 #define PCSR_DOZE       0x0040
36 #define PCSR_PRE_SHIFT  8
37 #define PCSR_PRE_MASK   0x0f00
38 
39 typedef struct {
40     MemoryRegion iomem;
41     qemu_irq irq;
42     ptimer_state *timer;
43     uint16_t pcsr;
44     uint16_t pmr;
45     uint16_t pcntr;
46 } m5208_timer_state;
47 
48 static void m5208_timer_update(m5208_timer_state *s)
49 {
50     if ((s->pcsr & (PCSR_PIE | PCSR_PIF)) == (PCSR_PIE | PCSR_PIF))
51         qemu_irq_raise(s->irq);
52     else
53         qemu_irq_lower(s->irq);
54 }
55 
56 static void m5208_timer_write(void *opaque, hwaddr offset,
57                               uint64_t value, unsigned size)
58 {
59     m5208_timer_state *s = (m5208_timer_state *)opaque;
60     int prescale;
61     int limit;
62     switch (offset) {
63     case 0:
64         /* The PIF bit is set-to-clear.  */
65         if (value & PCSR_PIF) {
66             s->pcsr &= ~PCSR_PIF;
67             value &= ~PCSR_PIF;
68         }
69         /* Avoid frobbing the timer if we're just twiddling IRQ bits. */
70         if (((s->pcsr ^ value) & ~PCSR_PIE) == 0) {
71             s->pcsr = value;
72             m5208_timer_update(s);
73             return;
74         }
75 
76         if (s->pcsr & PCSR_EN)
77             ptimer_stop(s->timer);
78 
79         s->pcsr = value;
80 
81         prescale = 1 << ((s->pcsr & PCSR_PRE_MASK) >> PCSR_PRE_SHIFT);
82         ptimer_set_freq(s->timer, (SYS_FREQ / 2) / prescale);
83         if (s->pcsr & PCSR_RLD)
84             limit = s->pmr;
85         else
86             limit = 0xffff;
87         ptimer_set_limit(s->timer, limit, 0);
88 
89         if (s->pcsr & PCSR_EN)
90             ptimer_run(s->timer, 0);
91         break;
92     case 2:
93         s->pmr = value;
94         s->pcsr &= ~PCSR_PIF;
95         if ((s->pcsr & PCSR_RLD) == 0) {
96             if (s->pcsr & PCSR_OVW)
97                 ptimer_set_count(s->timer, value);
98         } else {
99             ptimer_set_limit(s->timer, value, s->pcsr & PCSR_OVW);
100         }
101         break;
102     case 4:
103         break;
104     default:
105         hw_error("m5208_timer_write: Bad offset 0x%x\n", (int)offset);
106         break;
107     }
108     m5208_timer_update(s);
109 }
110 
111 static void m5208_timer_trigger(void *opaque)
112 {
113     m5208_timer_state *s = (m5208_timer_state *)opaque;
114     s->pcsr |= PCSR_PIF;
115     m5208_timer_update(s);
116 }
117 
118 static uint64_t m5208_timer_read(void *opaque, hwaddr addr,
119                                  unsigned size)
120 {
121     m5208_timer_state *s = (m5208_timer_state *)opaque;
122     switch (addr) {
123     case 0:
124         return s->pcsr;
125     case 2:
126         return s->pmr;
127     case 4:
128         return ptimer_get_count(s->timer);
129     default:
130         hw_error("m5208_timer_read: Bad offset 0x%x\n", (int)addr);
131         return 0;
132     }
133 }
134 
135 static const MemoryRegionOps m5208_timer_ops = {
136     .read = m5208_timer_read,
137     .write = m5208_timer_write,
138     .endianness = DEVICE_NATIVE_ENDIAN,
139 };
140 
141 static uint64_t m5208_sys_read(void *opaque, hwaddr addr,
142                                unsigned size)
143 {
144     switch (addr) {
145     case 0x110: /* SDCS0 */
146         {
147             int n;
148             for (n = 0; n < 32; n++) {
149                 if (ram_size < (2u << n))
150                     break;
151             }
152             return (n - 1)  | 0x40000000;
153         }
154     case 0x114: /* SDCS1 */
155         return 0;
156 
157     default:
158         hw_error("m5208_sys_read: Bad offset 0x%x\n", (int)addr);
159         return 0;
160     }
161 }
162 
163 static void m5208_sys_write(void *opaque, hwaddr addr,
164                             uint64_t value, unsigned size)
165 {
166     hw_error("m5208_sys_write: Bad offset 0x%x\n", (int)addr);
167 }
168 
169 static const MemoryRegionOps m5208_sys_ops = {
170     .read = m5208_sys_read,
171     .write = m5208_sys_write,
172     .endianness = DEVICE_NATIVE_ENDIAN,
173 };
174 
175 static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic)
176 {
177     MemoryRegion *iomem = g_new(MemoryRegion, 1);
178     m5208_timer_state *s;
179     QEMUBH *bh;
180     int i;
181 
182     /* SDRAMC.  */
183     memory_region_init_io(iomem, NULL, &m5208_sys_ops, NULL, "m5208-sys", 0x00004000);
184     memory_region_add_subregion(address_space, 0xfc0a8000, iomem);
185     /* Timers.  */
186     for (i = 0; i < 2; i++) {
187         s = g_new0(m5208_timer_state, 1);
188         bh = qemu_bh_new(m5208_timer_trigger, s);
189         s->timer = ptimer_init(bh, PTIMER_POLICY_DEFAULT);
190         memory_region_init_io(&s->iomem, NULL, &m5208_timer_ops, s,
191                               "m5208-timer", 0x00004000);
192         memory_region_add_subregion(address_space, 0xfc080000 + 0x4000 * i,
193                                     &s->iomem);
194         s->irq = pic[4 + i];
195     }
196 }
197 
198 static void mcf_fec_init(MemoryRegion *sysmem, NICInfo *nd, hwaddr base,
199                          qemu_irq *irqs)
200 {
201     DeviceState *dev;
202     SysBusDevice *s;
203     int i;
204 
205     qemu_check_nic_model(nd, TYPE_MCF_FEC_NET);
206     dev = qdev_create(NULL, TYPE_MCF_FEC_NET);
207     qdev_set_nic_properties(dev, nd);
208     qdev_init_nofail(dev);
209 
210     s = SYS_BUS_DEVICE(dev);
211     for (i = 0; i < FEC_NUM_IRQ; i++) {
212         sysbus_connect_irq(s, i, irqs[i]);
213     }
214 
215     memory_region_add_subregion(sysmem, base, sysbus_mmio_get_region(s, 0));
216 }
217 
218 static void mcf5208evb_init(MachineState *machine)
219 {
220     ram_addr_t ram_size = machine->ram_size;
221     const char *kernel_filename = machine->kernel_filename;
222     M68kCPU *cpu;
223     CPUM68KState *env;
224     int kernel_size;
225     uint64_t elf_entry;
226     hwaddr entry;
227     qemu_irq *pic;
228     MemoryRegion *address_space_mem = get_system_memory();
229     MemoryRegion *ram = g_new(MemoryRegion, 1);
230     MemoryRegion *sram = g_new(MemoryRegion, 1);
231 
232     cpu = M68K_CPU(cpu_create(machine->cpu_type));
233     env = &cpu->env;
234 
235     /* Initialize CPU registers.  */
236     env->vbr = 0;
237     /* TODO: Configure BARs.  */
238 
239     /* DRAM at 0x40000000 */
240     memory_region_allocate_system_memory(ram, NULL, "mcf5208.ram", ram_size);
241     memory_region_add_subregion(address_space_mem, 0x40000000, ram);
242 
243     /* Internal SRAM.  */
244     memory_region_init_ram(sram, NULL, "mcf5208.sram", 16384, &error_fatal);
245     memory_region_add_subregion(address_space_mem, 0x80000000, sram);
246 
247     /* Internal peripherals.  */
248     pic = mcf_intc_init(address_space_mem, 0xfc048000, cpu);
249 
250     mcf_uart_mm_init(0xfc060000, pic[26], serial_hds[0]);
251     mcf_uart_mm_init(0xfc064000, pic[27], serial_hds[1]);
252     mcf_uart_mm_init(0xfc068000, pic[28], serial_hds[2]);
253 
254     mcf5208_sys_init(address_space_mem, pic);
255 
256     if (nb_nics > 1) {
257         error_report("Too many NICs");
258         exit(1);
259     }
260     if (nd_table[0].used) {
261         mcf_fec_init(address_space_mem, &nd_table[0],
262                      0xfc030000, pic + 36);
263     }
264 
265     /*  0xfc000000 SCM.  */
266     /*  0xfc004000 XBS.  */
267     /*  0xfc008000 FlexBus CS.  */
268     /* 0xfc030000 FEC.  */
269     /*  0xfc040000 SCM + Power management.  */
270     /*  0xfc044000 eDMA.  */
271     /* 0xfc048000 INTC.  */
272     /*  0xfc058000 I2C.  */
273     /*  0xfc05c000 QSPI.  */
274     /* 0xfc060000 UART0.  */
275     /* 0xfc064000 UART0.  */
276     /* 0xfc068000 UART0.  */
277     /*  0xfc070000 DMA timers.  */
278     /* 0xfc080000 PIT0.  */
279     /* 0xfc084000 PIT1.  */
280     /*  0xfc088000 EPORT.  */
281     /*  0xfc08c000 Watchdog.  */
282     /*  0xfc090000 clock module.  */
283     /*  0xfc0a0000 CCM + reset.  */
284     /*  0xfc0a4000 GPIO.  */
285     /* 0xfc0a8000 SDRAM controller.  */
286 
287     /* Load kernel.  */
288     if (!kernel_filename) {
289         if (qtest_enabled()) {
290             return;
291         }
292         error_report("Kernel image must be specified");
293         exit(1);
294     }
295 
296     kernel_size = load_elf(kernel_filename, NULL, NULL, &elf_entry,
297                            NULL, NULL, 1, EM_68K, 0, 0);
298     entry = elf_entry;
299     if (kernel_size < 0) {
300         kernel_size = load_uimage(kernel_filename, &entry, NULL, NULL,
301                                   NULL, NULL);
302     }
303     if (kernel_size < 0) {
304         kernel_size = load_image_targphys(kernel_filename, 0x40000000,
305                                           ram_size);
306         entry = 0x40000000;
307     }
308     if (kernel_size < 0) {
309         error_report("Could not load kernel '%s'", kernel_filename);
310         exit(1);
311     }
312 
313     env->pc = entry;
314 }
315 
316 static void mcf5208evb_machine_init(MachineClass *mc)
317 {
318     mc->desc = "MCF5206EVB";
319     mc->init = mcf5208evb_init;
320     mc->is_default = 1;
321     mc->default_cpu_type = M68K_CPU_TYPE_NAME("m5208");
322 }
323 
324 DEFINE_MACHINE("mcf5208evb", mcf5208evb_machine_init)
325