xref: /openbmc/qemu/hw/m68k/mcf5208.c (revision 0f74e61d)
1 /*
2  * Motorola ColdFire MCF5208 SoC emulation.
3  *
4  * Copyright (c) 2007 CodeSourcery.
5  *
6  * This code is licensed under the GPL
7  */
8 #include "qemu/osdep.h"
9 #include "qemu/units.h"
10 #include "qemu/error-report.h"
11 #include "qapi/error.h"
12 #include "qemu-common.h"
13 #include "cpu.h"
14 #include "hw/hw.h"
15 #include "hw/m68k/mcf.h"
16 #include "hw/m68k/mcf_fec.h"
17 #include "qemu/timer.h"
18 #include "hw/ptimer.h"
19 #include "sysemu/sysemu.h"
20 #include "sysemu/qtest.h"
21 #include "net/net.h"
22 #include "hw/boards.h"
23 #include "hw/loader.h"
24 #include "hw/sysbus.h"
25 #include "elf.h"
26 #include "exec/address-spaces.h"
27 
28 #define SYS_FREQ 166666666
29 
30 #define PCSR_EN         0x0001
31 #define PCSR_RLD        0x0002
32 #define PCSR_PIF        0x0004
33 #define PCSR_PIE        0x0008
34 #define PCSR_OVW        0x0010
35 #define PCSR_DBG        0x0020
36 #define PCSR_DOZE       0x0040
37 #define PCSR_PRE_SHIFT  8
38 #define PCSR_PRE_MASK   0x0f00
39 
40 typedef struct {
41     MemoryRegion iomem;
42     qemu_irq irq;
43     ptimer_state *timer;
44     uint16_t pcsr;
45     uint16_t pmr;
46     uint16_t pcntr;
47 } m5208_timer_state;
48 
49 static void m5208_timer_update(m5208_timer_state *s)
50 {
51     if ((s->pcsr & (PCSR_PIE | PCSR_PIF)) == (PCSR_PIE | PCSR_PIF))
52         qemu_irq_raise(s->irq);
53     else
54         qemu_irq_lower(s->irq);
55 }
56 
57 static void m5208_timer_write(void *opaque, hwaddr offset,
58                               uint64_t value, unsigned size)
59 {
60     m5208_timer_state *s = (m5208_timer_state *)opaque;
61     int prescale;
62     int limit;
63     switch (offset) {
64     case 0:
65         /* The PIF bit is set-to-clear.  */
66         if (value & PCSR_PIF) {
67             s->pcsr &= ~PCSR_PIF;
68             value &= ~PCSR_PIF;
69         }
70         /* Avoid frobbing the timer if we're just twiddling IRQ bits. */
71         if (((s->pcsr ^ value) & ~PCSR_PIE) == 0) {
72             s->pcsr = value;
73             m5208_timer_update(s);
74             return;
75         }
76 
77         if (s->pcsr & PCSR_EN)
78             ptimer_stop(s->timer);
79 
80         s->pcsr = value;
81 
82         prescale = 1 << ((s->pcsr & PCSR_PRE_MASK) >> PCSR_PRE_SHIFT);
83         ptimer_set_freq(s->timer, (SYS_FREQ / 2) / prescale);
84         if (s->pcsr & PCSR_RLD)
85             limit = s->pmr;
86         else
87             limit = 0xffff;
88         ptimer_set_limit(s->timer, limit, 0);
89 
90         if (s->pcsr & PCSR_EN)
91             ptimer_run(s->timer, 0);
92         break;
93     case 2:
94         s->pmr = value;
95         s->pcsr &= ~PCSR_PIF;
96         if ((s->pcsr & PCSR_RLD) == 0) {
97             if (s->pcsr & PCSR_OVW)
98                 ptimer_set_count(s->timer, value);
99         } else {
100             ptimer_set_limit(s->timer, value, s->pcsr & PCSR_OVW);
101         }
102         break;
103     case 4:
104         break;
105     default:
106         hw_error("m5208_timer_write: Bad offset 0x%x\n", (int)offset);
107         break;
108     }
109     m5208_timer_update(s);
110 }
111 
112 static void m5208_timer_trigger(void *opaque)
113 {
114     m5208_timer_state *s = (m5208_timer_state *)opaque;
115     s->pcsr |= PCSR_PIF;
116     m5208_timer_update(s);
117 }
118 
119 static uint64_t m5208_timer_read(void *opaque, hwaddr addr,
120                                  unsigned size)
121 {
122     m5208_timer_state *s = (m5208_timer_state *)opaque;
123     switch (addr) {
124     case 0:
125         return s->pcsr;
126     case 2:
127         return s->pmr;
128     case 4:
129         return ptimer_get_count(s->timer);
130     default:
131         hw_error("m5208_timer_read: Bad offset 0x%x\n", (int)addr);
132         return 0;
133     }
134 }
135 
136 static const MemoryRegionOps m5208_timer_ops = {
137     .read = m5208_timer_read,
138     .write = m5208_timer_write,
139     .endianness = DEVICE_NATIVE_ENDIAN,
140 };
141 
142 static uint64_t m5208_sys_read(void *opaque, hwaddr addr,
143                                unsigned size)
144 {
145     switch (addr) {
146     case 0x110: /* SDCS0 */
147         {
148             int n;
149             for (n = 0; n < 32; n++) {
150                 if (ram_size < (2u << n))
151                     break;
152             }
153             return (n - 1)  | 0x40000000;
154         }
155     case 0x114: /* SDCS1 */
156         return 0;
157 
158     default:
159         hw_error("m5208_sys_read: Bad offset 0x%x\n", (int)addr);
160         return 0;
161     }
162 }
163 
164 static void m5208_sys_write(void *opaque, hwaddr addr,
165                             uint64_t value, unsigned size)
166 {
167     hw_error("m5208_sys_write: Bad offset 0x%x\n", (int)addr);
168 }
169 
170 static const MemoryRegionOps m5208_sys_ops = {
171     .read = m5208_sys_read,
172     .write = m5208_sys_write,
173     .endianness = DEVICE_NATIVE_ENDIAN,
174 };
175 
176 static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic)
177 {
178     MemoryRegion *iomem = g_new(MemoryRegion, 1);
179     m5208_timer_state *s;
180     QEMUBH *bh;
181     int i;
182 
183     /* SDRAMC.  */
184     memory_region_init_io(iomem, NULL, &m5208_sys_ops, NULL, "m5208-sys", 0x00004000);
185     memory_region_add_subregion(address_space, 0xfc0a8000, iomem);
186     /* Timers.  */
187     for (i = 0; i < 2; i++) {
188         s = g_new0(m5208_timer_state, 1);
189         bh = qemu_bh_new(m5208_timer_trigger, s);
190         s->timer = ptimer_init(bh, PTIMER_POLICY_DEFAULT);
191         memory_region_init_io(&s->iomem, NULL, &m5208_timer_ops, s,
192                               "m5208-timer", 0x00004000);
193         memory_region_add_subregion(address_space, 0xfc080000 + 0x4000 * i,
194                                     &s->iomem);
195         s->irq = pic[4 + i];
196     }
197 }
198 
199 static void mcf_fec_init(MemoryRegion *sysmem, NICInfo *nd, hwaddr base,
200                          qemu_irq *irqs)
201 {
202     DeviceState *dev;
203     SysBusDevice *s;
204     int i;
205 
206     qemu_check_nic_model(nd, TYPE_MCF_FEC_NET);
207     dev = qdev_create(NULL, TYPE_MCF_FEC_NET);
208     qdev_set_nic_properties(dev, nd);
209     qdev_init_nofail(dev);
210 
211     s = SYS_BUS_DEVICE(dev);
212     for (i = 0; i < FEC_NUM_IRQ; i++) {
213         sysbus_connect_irq(s, i, irqs[i]);
214     }
215 
216     memory_region_add_subregion(sysmem, base, sysbus_mmio_get_region(s, 0));
217 }
218 
219 static void mcf5208evb_init(MachineState *machine)
220 {
221     ram_addr_t ram_size = machine->ram_size;
222     const char *kernel_filename = machine->kernel_filename;
223     M68kCPU *cpu;
224     CPUM68KState *env;
225     int kernel_size;
226     uint64_t elf_entry;
227     hwaddr entry;
228     qemu_irq *pic;
229     MemoryRegion *address_space_mem = get_system_memory();
230     MemoryRegion *ram = g_new(MemoryRegion, 1);
231     MemoryRegion *sram = g_new(MemoryRegion, 1);
232 
233     cpu = M68K_CPU(cpu_create(machine->cpu_type));
234     env = &cpu->env;
235 
236     /* Initialize CPU registers.  */
237     env->vbr = 0;
238     /* TODO: Configure BARs.  */
239 
240     /* DRAM at 0x40000000 */
241     memory_region_allocate_system_memory(ram, NULL, "mcf5208.ram", ram_size);
242     memory_region_add_subregion(address_space_mem, 0x40000000, ram);
243 
244     /* Internal SRAM.  */
245     memory_region_init_ram(sram, NULL, "mcf5208.sram", 16 * KiB, &error_fatal);
246     memory_region_add_subregion(address_space_mem, 0x80000000, sram);
247 
248     /* Internal peripherals.  */
249     pic = mcf_intc_init(address_space_mem, 0xfc048000, cpu);
250 
251     mcf_uart_mm_init(0xfc060000, pic[26], serial_hd(0));
252     mcf_uart_mm_init(0xfc064000, pic[27], serial_hd(1));
253     mcf_uart_mm_init(0xfc068000, pic[28], serial_hd(2));
254 
255     mcf5208_sys_init(address_space_mem, pic);
256 
257     if (nb_nics > 1) {
258         error_report("Too many NICs");
259         exit(1);
260     }
261     if (nd_table[0].used) {
262         mcf_fec_init(address_space_mem, &nd_table[0],
263                      0xfc030000, pic + 36);
264     }
265 
266     /*  0xfc000000 SCM.  */
267     /*  0xfc004000 XBS.  */
268     /*  0xfc008000 FlexBus CS.  */
269     /* 0xfc030000 FEC.  */
270     /*  0xfc040000 SCM + Power management.  */
271     /*  0xfc044000 eDMA.  */
272     /* 0xfc048000 INTC.  */
273     /*  0xfc058000 I2C.  */
274     /*  0xfc05c000 QSPI.  */
275     /* 0xfc060000 UART0.  */
276     /* 0xfc064000 UART0.  */
277     /* 0xfc068000 UART0.  */
278     /*  0xfc070000 DMA timers.  */
279     /* 0xfc080000 PIT0.  */
280     /* 0xfc084000 PIT1.  */
281     /*  0xfc088000 EPORT.  */
282     /*  0xfc08c000 Watchdog.  */
283     /*  0xfc090000 clock module.  */
284     /*  0xfc0a0000 CCM + reset.  */
285     /*  0xfc0a4000 GPIO.  */
286     /* 0xfc0a8000 SDRAM controller.  */
287 
288     /* Load kernel.  */
289     if (!kernel_filename) {
290         if (qtest_enabled()) {
291             return;
292         }
293         error_report("Kernel image must be specified");
294         exit(1);
295     }
296 
297     kernel_size = load_elf(kernel_filename, NULL, NULL, NULL, &elf_entry,
298                            NULL, NULL, 1, EM_68K, 0, 0);
299     entry = elf_entry;
300     if (kernel_size < 0) {
301         kernel_size = load_uimage(kernel_filename, &entry, NULL, NULL,
302                                   NULL, NULL);
303     }
304     if (kernel_size < 0) {
305         kernel_size = load_image_targphys(kernel_filename, 0x40000000,
306                                           ram_size);
307         entry = 0x40000000;
308     }
309     if (kernel_size < 0) {
310         error_report("Could not load kernel '%s'", kernel_filename);
311         exit(1);
312     }
313 
314     env->pc = entry;
315 }
316 
317 static void mcf5208evb_machine_init(MachineClass *mc)
318 {
319     mc->desc = "MCF5208EVB";
320     mc->init = mcf5208evb_init;
321     mc->is_default = 1;
322     mc->default_cpu_type = M68K_CPU_TYPE_NAME("m5208");
323 }
324 
325 DEFINE_MACHINE("mcf5208evb", mcf5208evb_machine_init)
326