xref: /openbmc/qemu/hw/isa/vt82c686.c (revision fca9d723)
1 /*
2  * VT82C686B south bridge support
3  *
4  * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
5  * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
6  * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
7  * This code is licensed under the GNU GPL v2.
8  *
9  * Contributions after 2012-01-13 are licensed under the terms of the
10  * GNU GPL, version 2 or (at your option) any later version.
11  */
12 
13 #include "qemu/osdep.h"
14 #include "hw/isa/vt82c686.h"
15 #include "hw/i2c/i2c.h"
16 #include "hw/pci/pci.h"
17 #include "hw/qdev-properties.h"
18 #include "hw/isa/isa.h"
19 #include "hw/isa/superio.h"
20 #include "hw/sysbus.h"
21 #include "migration/vmstate.h"
22 #include "hw/mips/mips.h"
23 #include "hw/isa/apm.h"
24 #include "hw/acpi/acpi.h"
25 #include "hw/i2c/pm_smbus.h"
26 #include "qapi/error.h"
27 #include "qemu/module.h"
28 #include "qemu/timer.h"
29 #include "exec/address-spaces.h"
30 #include "qom/object.h"
31 
32 /* #define DEBUG_VT82C686B */
33 
34 #ifdef DEBUG_VT82C686B
35 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __func__, ##__VA_ARGS__)
36 #else
37 #define DPRINTF(fmt, ...)
38 #endif
39 
40 typedef struct SuperIOConfig {
41     uint8_t config[0x100];
42     uint8_t index;
43     uint8_t data;
44 } SuperIOConfig;
45 
46 struct VT82C686BState {
47     PCIDevice dev;
48     MemoryRegion superio;
49     SuperIOConfig superio_conf;
50 };
51 
52 #define TYPE_VT82C686B_DEVICE "VT82C686B"
53 OBJECT_DECLARE_SIMPLE_TYPE(VT82C686BState, VT82C686B_DEVICE)
54 
55 static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data,
56                                   unsigned size)
57 {
58     SuperIOConfig *superio_conf = opaque;
59 
60     DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x\n", addr, data);
61     if (addr == 0x3f0) {
62         superio_conf->index = data & 0xff;
63     } else {
64         bool can_write = true;
65         /* 0x3f1 */
66         switch (superio_conf->index) {
67         case 0x00 ... 0xdf:
68         case 0xe4:
69         case 0xe5:
70         case 0xe9 ... 0xed:
71         case 0xf3:
72         case 0xf5:
73         case 0xf7:
74         case 0xf9 ... 0xfb:
75         case 0xfd ... 0xff:
76             can_write = false;
77             break;
78         case 0xe7:
79             if ((data & 0xff) != 0xfe) {
80                 DPRINTF("change uart 1 base. unsupported yet\n");
81                 can_write = false;
82             }
83             break;
84         case 0xe8:
85             if ((data & 0xff) != 0xbe) {
86                 DPRINTF("change uart 2 base. unsupported yet\n");
87                 can_write = false;
88             }
89             break;
90         default:
91             break;
92 
93         }
94         if (can_write) {
95             superio_conf->config[superio_conf->index] = data & 0xff;
96         }
97     }
98 }
99 
100 static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size)
101 {
102     SuperIOConfig *superio_conf = opaque;
103 
104     DPRINTF("superio_ioport_readb  address 0x%x\n", addr);
105     return superio_conf->config[superio_conf->index];
106 }
107 
108 static const MemoryRegionOps superio_ops = {
109     .read = superio_ioport_readb,
110     .write = superio_ioport_writeb,
111     .endianness = DEVICE_NATIVE_ENDIAN,
112     .impl = {
113         .min_access_size = 1,
114         .max_access_size = 1,
115     },
116 };
117 
118 static void vt82c686b_isa_reset(DeviceState *dev)
119 {
120     VT82C686BState *vt82c = VT82C686B_DEVICE(dev);
121     uint8_t *pci_conf = vt82c->dev.config;
122 
123     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
124     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
125                  PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
126     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
127 
128     pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
129     pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
130     pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
131     pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
132     pci_conf[0x59] = 0x04;
133     pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
134     pci_conf[0x5f] = 0x04;
135     pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
136 
137     vt82c->superio_conf.config[0xe0] = 0x3c;
138     vt82c->superio_conf.config[0xe2] = 0x03;
139     vt82c->superio_conf.config[0xe3] = 0xfc;
140     vt82c->superio_conf.config[0xe6] = 0xde;
141     vt82c->superio_conf.config[0xe7] = 0xfe;
142     vt82c->superio_conf.config[0xe8] = 0xbe;
143 }
144 
145 /* write config pci function0 registers. PCI-ISA bridge */
146 static void vt82c686b_write_config(PCIDevice *d, uint32_t address,
147                                    uint32_t val, int len)
148 {
149     VT82C686BState *vt686 = VT82C686B_DEVICE(d);
150 
151     DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x\n",
152            address, val, len);
153 
154     pci_default_write_config(d, address, val, len);
155     if (address == 0x85) {  /* enable or disable super IO configure */
156         memory_region_set_enabled(&vt686->superio, val & 0x2);
157     }
158 }
159 
160 #define ACPI_DBG_IO_ADDR  0xb044
161 
162 struct VT686PMState {
163     PCIDevice dev;
164     MemoryRegion io;
165     ACPIREGS ar;
166     APMState apm;
167     PMSMBus smb;
168     uint32_t smb_io_base;
169 };
170 
171 struct VT686AC97State {
172     PCIDevice dev;
173 };
174 
175 struct VT686MC97State {
176     PCIDevice dev;
177 };
178 
179 #define TYPE_VT82C686B_PM_DEVICE "VT82C686B_PM"
180 OBJECT_DECLARE_SIMPLE_TYPE(VT686PMState, VT82C686B_PM_DEVICE)
181 
182 #define TYPE_VT82C686B_MC97_DEVICE "VT82C686B_MC97"
183 OBJECT_DECLARE_SIMPLE_TYPE(VT686MC97State, VT82C686B_MC97_DEVICE)
184 
185 #define TYPE_VT82C686B_AC97_DEVICE "VT82C686B_AC97"
186 OBJECT_DECLARE_SIMPLE_TYPE(VT686AC97State, VT82C686B_AC97_DEVICE)
187 
188 static void pm_update_sci(VT686PMState *s)
189 {
190     int sci_level, pmsts;
191 
192     pmsts = acpi_pm1_evt_get_sts(&s->ar);
193     sci_level = (((pmsts & s->ar.pm1.evt.en) &
194                   (ACPI_BITMASK_RT_CLOCK_ENABLE |
195                    ACPI_BITMASK_POWER_BUTTON_ENABLE |
196                    ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
197                    ACPI_BITMASK_TIMER_ENABLE)) != 0);
198     pci_set_irq(&s->dev, sci_level);
199     /* schedule a timer interruption if needed */
200     acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
201                        !(pmsts & ACPI_BITMASK_TIMER_STATUS));
202 }
203 
204 static void pm_tmr_timer(ACPIREGS *ar)
205 {
206     VT686PMState *s = container_of(ar, VT686PMState, ar);
207     pm_update_sci(s);
208 }
209 
210 static void pm_io_space_update(VT686PMState *s)
211 {
212     uint32_t pm_io_base;
213 
214     pm_io_base = pci_get_long(s->dev.config + 0x40);
215     pm_io_base &= 0xffc0;
216 
217     memory_region_transaction_begin();
218     memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1);
219     memory_region_set_address(&s->io, pm_io_base);
220     memory_region_transaction_commit();
221 }
222 
223 static void pm_write_config(PCIDevice *d,
224                             uint32_t address, uint32_t val, int len)
225 {
226     DPRINTF("pm_write_config  address 0x%x  val 0x%x len 0x%x\n",
227            address, val, len);
228     pci_default_write_config(d, address, val, len);
229 }
230 
231 static int vmstate_acpi_post_load(void *opaque, int version_id)
232 {
233     VT686PMState *s = opaque;
234 
235     pm_io_space_update(s);
236     return 0;
237 }
238 
239 static const VMStateDescription vmstate_acpi = {
240     .name = "vt82c686b_pm",
241     .version_id = 1,
242     .minimum_version_id = 1,
243     .post_load = vmstate_acpi_post_load,
244     .fields = (VMStateField[]) {
245         VMSTATE_PCI_DEVICE(dev, VT686PMState),
246         VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState),
247         VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState),
248         VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState),
249         VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
250         VMSTATE_TIMER_PTR(ar.tmr.timer, VT686PMState),
251         VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState),
252         VMSTATE_END_OF_LIST()
253     }
254 };
255 
256 /*
257  * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
258  * just register a PCI device now, functionalities will be implemented later.
259  */
260 
261 static void vt82c686b_ac97_realize(PCIDevice *dev, Error **errp)
262 {
263     VT686AC97State *s = VT82C686B_AC97_DEVICE(dev);
264     uint8_t *pci_conf = s->dev.config;
265 
266     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
267                  PCI_COMMAND_PARITY);
268     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |
269                  PCI_STATUS_DEVSEL_MEDIUM);
270     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
271 }
272 
273 void vt82c686b_ac97_init(PCIBus *bus, int devfn)
274 {
275     PCIDevice *dev;
276 
277     dev = pci_new(devfn, TYPE_VT82C686B_AC97_DEVICE);
278     pci_realize_and_unref(dev, bus, &error_fatal);
279 }
280 
281 static void via_ac97_class_init(ObjectClass *klass, void *data)
282 {
283     DeviceClass *dc = DEVICE_CLASS(klass);
284     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
285 
286     k->realize = vt82c686b_ac97_realize;
287     k->vendor_id = PCI_VENDOR_ID_VIA;
288     k->device_id = PCI_DEVICE_ID_VIA_AC97;
289     k->revision = 0x50;
290     k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;
291     set_bit(DEVICE_CATEGORY_SOUND, dc->categories);
292     dc->desc = "AC97";
293 }
294 
295 static const TypeInfo via_ac97_info = {
296     .name          = TYPE_VT82C686B_AC97_DEVICE,
297     .parent        = TYPE_PCI_DEVICE,
298     .instance_size = sizeof(VT686AC97State),
299     .class_init    = via_ac97_class_init,
300     .interfaces = (InterfaceInfo[]) {
301         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
302         { },
303     },
304 };
305 
306 static void vt82c686b_mc97_realize(PCIDevice *dev, Error **errp)
307 {
308     VT686MC97State *s = VT82C686B_MC97_DEVICE(dev);
309     uint8_t *pci_conf = s->dev.config;
310 
311     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
312                  PCI_COMMAND_VGA_PALETTE);
313     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
314     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
315 }
316 
317 void vt82c686b_mc97_init(PCIBus *bus, int devfn)
318 {
319     PCIDevice *dev;
320 
321     dev = pci_new(devfn, TYPE_VT82C686B_MC97_DEVICE);
322     pci_realize_and_unref(dev, bus, &error_fatal);
323 }
324 
325 static void via_mc97_class_init(ObjectClass *klass, void *data)
326 {
327     DeviceClass *dc = DEVICE_CLASS(klass);
328     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
329 
330     k->realize = vt82c686b_mc97_realize;
331     k->vendor_id = PCI_VENDOR_ID_VIA;
332     k->device_id = PCI_DEVICE_ID_VIA_MC97;
333     k->class_id = PCI_CLASS_COMMUNICATION_OTHER;
334     k->revision = 0x30;
335     set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
336     dc->desc = "MC97";
337 }
338 
339 static const TypeInfo via_mc97_info = {
340     .name          = TYPE_VT82C686B_MC97_DEVICE,
341     .parent        = TYPE_PCI_DEVICE,
342     .instance_size = sizeof(VT686MC97State),
343     .class_init    = via_mc97_class_init,
344     .interfaces = (InterfaceInfo[]) {
345         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
346         { },
347     },
348 };
349 
350 /* vt82c686 pm init */
351 static void vt82c686b_pm_realize(PCIDevice *dev, Error **errp)
352 {
353     VT686PMState *s = VT82C686B_PM_DEVICE(dev);
354     uint8_t *pci_conf;
355 
356     pci_conf = s->dev.config;
357     pci_set_word(pci_conf + PCI_COMMAND, 0);
358     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
359                  PCI_STATUS_DEVSEL_MEDIUM);
360 
361     /* 0x48-0x4B is Power Management I/O Base */
362     pci_set_long(pci_conf + 0x48, 0x00000001);
363 
364     /* SMB ports:0xeee0~0xeeef */
365     s->smb_io_base = ((s->smb_io_base & 0xfff0) + 0x0);
366     pci_conf[0x90] = s->smb_io_base | 1;
367     pci_conf[0x91] = s->smb_io_base >> 8;
368     pci_conf[0xd2] = 0x90;
369     pm_smbus_init(DEVICE(s), &s->smb, false);
370     memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io);
371 
372     apm_init(dev, &s->apm, NULL, s);
373 
374     memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64);
375     memory_region_set_enabled(&s->io, false);
376     memory_region_add_subregion(get_system_io(), 0, &s->io);
377 
378     acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
379     acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
380     acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2);
381 }
382 
383 I2CBus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
384                           qemu_irq sci_irq)
385 {
386     PCIDevice *dev;
387     VT686PMState *s;
388 
389     dev = pci_new(devfn, TYPE_VT82C686B_PM_DEVICE);
390     qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
391 
392     s = VT82C686B_PM_DEVICE(dev);
393 
394     pci_realize_and_unref(dev, bus, &error_fatal);
395 
396     return s->smb.smbus;
397 }
398 
399 static Property via_pm_properties[] = {
400     DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
401     DEFINE_PROP_END_OF_LIST(),
402 };
403 
404 static void via_pm_class_init(ObjectClass *klass, void *data)
405 {
406     DeviceClass *dc = DEVICE_CLASS(klass);
407     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
408 
409     k->realize = vt82c686b_pm_realize;
410     k->config_write = pm_write_config;
411     k->vendor_id = PCI_VENDOR_ID_VIA;
412     k->device_id = PCI_DEVICE_ID_VIA_ACPI;
413     k->class_id = PCI_CLASS_BRIDGE_OTHER;
414     k->revision = 0x40;
415     dc->desc = "PM";
416     dc->vmsd = &vmstate_acpi;
417     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
418     device_class_set_props(dc, via_pm_properties);
419 }
420 
421 static const TypeInfo via_pm_info = {
422     .name          = TYPE_VT82C686B_PM_DEVICE,
423     .parent        = TYPE_PCI_DEVICE,
424     .instance_size = sizeof(VT686PMState),
425     .class_init    = via_pm_class_init,
426     .interfaces = (InterfaceInfo[]) {
427         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
428         { },
429     },
430 };
431 
432 static const VMStateDescription vmstate_via = {
433     .name = "vt82c686b",
434     .version_id = 1,
435     .minimum_version_id = 1,
436     .fields = (VMStateField[]) {
437         VMSTATE_PCI_DEVICE(dev, VT82C686BState),
438         VMSTATE_END_OF_LIST()
439     }
440 };
441 
442 /* init the PCI-to-ISA bridge */
443 static void vt82c686b_realize(PCIDevice *d, Error **errp)
444 {
445     VT82C686BState *vt82c = VT82C686B_DEVICE(d);
446     uint8_t *pci_conf;
447     ISABus *isa_bus;
448     uint8_t *wmask;
449     int i;
450 
451     isa_bus = isa_bus_new(DEVICE(d), get_system_memory(),
452                           pci_address_space_io(d), errp);
453     if (!isa_bus) {
454         return;
455     }
456 
457     pci_conf = d->config;
458     pci_config_set_prog_interface(pci_conf, 0x0);
459 
460     wmask = d->wmask;
461     for (i = 0x00; i < 0xff; i++) {
462         if (i <= 0x03 || (i >= 0x08 && i <= 0x3f)) {
463             wmask[i] = 0x00;
464         }
465     }
466 
467     memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops,
468                           &vt82c->superio_conf, "superio", 2);
469     memory_region_set_enabled(&vt82c->superio, false);
470     /*
471      * The floppy also uses 0x3f0 and 0x3f1.
472      * But we do not emulate a floppy, so just set it here.
473      */
474     memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
475                                 &vt82c->superio);
476 }
477 
478 ISABus *vt82c686b_isa_init(PCIBus *bus, int devfn)
479 {
480     PCIDevice *d;
481 
482     d = pci_create_simple_multifunction(bus, devfn, true,
483                                         TYPE_VT82C686B_DEVICE);
484 
485     return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0"));
486 }
487 
488 static void via_class_init(ObjectClass *klass, void *data)
489 {
490     DeviceClass *dc = DEVICE_CLASS(klass);
491     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
492 
493     k->realize = vt82c686b_realize;
494     k->config_write = vt82c686b_write_config;
495     k->vendor_id = PCI_VENDOR_ID_VIA;
496     k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
497     k->class_id = PCI_CLASS_BRIDGE_ISA;
498     k->revision = 0x40;
499     dc->reset = vt82c686b_isa_reset;
500     dc->desc = "ISA bridge";
501     dc->vmsd = &vmstate_via;
502     /*
503      * Reason: part of VIA VT82C686 southbridge, needs to be wired up,
504      * e.g. by mips_fuloong2e_init()
505      */
506     dc->user_creatable = false;
507 }
508 
509 static const TypeInfo via_info = {
510     .name          = TYPE_VT82C686B_DEVICE,
511     .parent        = TYPE_PCI_DEVICE,
512     .instance_size = sizeof(VT82C686BState),
513     .class_init    = via_class_init,
514     .interfaces = (InterfaceInfo[]) {
515         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
516         { },
517     },
518 };
519 
520 static void vt82c686b_superio_class_init(ObjectClass *klass, void *data)
521 {
522     ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass);
523 
524     sc->serial.count = 2;
525     sc->parallel.count = 1;
526     sc->ide.count = 0;
527     sc->floppy.count = 1;
528 }
529 
530 static const TypeInfo via_superio_info = {
531     .name          = TYPE_VT82C686B_SUPERIO,
532     .parent        = TYPE_ISA_SUPERIO,
533     .instance_size = sizeof(ISASuperIODevice),
534     .class_size    = sizeof(ISASuperIOClass),
535     .class_init    = vt82c686b_superio_class_init,
536 };
537 
538 static void vt82c686b_register_types(void)
539 {
540     type_register_static(&via_ac97_info);
541     type_register_static(&via_mc97_info);
542     type_register_static(&via_pm_info);
543     type_register_static(&via_superio_info);
544     type_register_static(&via_info);
545 }
546 
547 type_init(vt82c686b_register_types)
548