1 /* 2 * VT82C686B south bridge support 3 * 4 * Copyright (c) 2008 yajin (yajin@vm-kernel.org) 5 * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn) 6 * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com) 7 * This code is licensed under the GNU GPL v2. 8 * 9 * Contributions after 2012-01-13 are licensed under the terms of the 10 * GNU GPL, version 2 or (at your option) any later version. 11 */ 12 13 #include "qemu/osdep.h" 14 #include "hw/isa/vt82c686.h" 15 #include "hw/i2c/i2c.h" 16 #include "hw/pci/pci.h" 17 #include "hw/qdev-properties.h" 18 #include "hw/isa/isa.h" 19 #include "hw/isa/superio.h" 20 #include "hw/sysbus.h" 21 #include "migration/vmstate.h" 22 #include "hw/mips/mips.h" 23 #include "hw/isa/apm.h" 24 #include "hw/acpi/acpi.h" 25 #include "hw/i2c/pm_smbus.h" 26 #include "qemu/module.h" 27 #include "qemu/timer.h" 28 #include "exec/address-spaces.h" 29 30 //#define DEBUG_VT82C686B 31 32 #ifdef DEBUG_VT82C686B 33 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __func__, ##__VA_ARGS__) 34 #else 35 #define DPRINTF(fmt, ...) 36 #endif 37 38 typedef struct SuperIOConfig 39 { 40 uint8_t config[0x100]; 41 uint8_t index; 42 uint8_t data; 43 } SuperIOConfig; 44 45 typedef struct VT82C686BState { 46 PCIDevice dev; 47 MemoryRegion superio; 48 SuperIOConfig superio_conf; 49 } VT82C686BState; 50 51 #define TYPE_VT82C686B_DEVICE "VT82C686B" 52 #define VT82C686B_DEVICE(obj) \ 53 OBJECT_CHECK(VT82C686BState, (obj), TYPE_VT82C686B_DEVICE) 54 55 static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data, 56 unsigned size) 57 { 58 SuperIOConfig *superio_conf = opaque; 59 60 DPRINTF("superio_ioport_writeb address 0x%x val 0x%x\n", addr, data); 61 if (addr == 0x3f0) { 62 superio_conf->index = data & 0xff; 63 } else { 64 bool can_write = true; 65 /* 0x3f1 */ 66 switch (superio_conf->index) { 67 case 0x00 ... 0xdf: 68 case 0xe4: 69 case 0xe5: 70 case 0xe9 ... 0xed: 71 case 0xf3: 72 case 0xf5: 73 case 0xf7: 74 case 0xf9 ... 0xfb: 75 case 0xfd ... 0xff: 76 can_write = false; 77 break; 78 case 0xe7: 79 if ((data & 0xff) != 0xfe) { 80 DPRINTF("change uart 1 base. unsupported yet\n"); 81 can_write = false; 82 } 83 break; 84 case 0xe8: 85 if ((data & 0xff) != 0xbe) { 86 DPRINTF("change uart 2 base. unsupported yet\n"); 87 can_write = false; 88 } 89 break; 90 default: 91 break; 92 93 } 94 if (can_write) { 95 superio_conf->config[superio_conf->index] = data & 0xff; 96 } 97 } 98 } 99 100 static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size) 101 { 102 SuperIOConfig *superio_conf = opaque; 103 104 DPRINTF("superio_ioport_readb address 0x%x\n", addr); 105 return (superio_conf->config[superio_conf->index]); 106 } 107 108 static const MemoryRegionOps superio_ops = { 109 .read = superio_ioport_readb, 110 .write = superio_ioport_writeb, 111 .endianness = DEVICE_NATIVE_ENDIAN, 112 .impl = { 113 .min_access_size = 1, 114 .max_access_size = 1, 115 }, 116 }; 117 118 static void vt82c686b_isa_reset(DeviceState *dev) 119 { 120 VT82C686BState *vt82c = VT82C686B_DEVICE(dev); 121 uint8_t *pci_conf = vt82c->dev.config; 122 123 pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0); 124 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | 125 PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL); 126 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM); 127 128 pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */ 129 pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */ 130 pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */ 131 pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */ 132 pci_conf[0x59] = 0x04; 133 pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/ 134 pci_conf[0x5f] = 0x04; 135 pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */ 136 137 vt82c->superio_conf.config[0xe0] = 0x3c; 138 vt82c->superio_conf.config[0xe2] = 0x03; 139 vt82c->superio_conf.config[0xe3] = 0xfc; 140 vt82c->superio_conf.config[0xe6] = 0xde; 141 vt82c->superio_conf.config[0xe7] = 0xfe; 142 vt82c->superio_conf.config[0xe8] = 0xbe; 143 } 144 145 /* write config pci function0 registers. PCI-ISA bridge */ 146 static void vt82c686b_write_config(PCIDevice * d, uint32_t address, 147 uint32_t val, int len) 148 { 149 VT82C686BState *vt686 = VT82C686B_DEVICE(d); 150 151 DPRINTF("vt82c686b_write_config address 0x%x val 0x%x len 0x%x\n", 152 address, val, len); 153 154 pci_default_write_config(d, address, val, len); 155 if (address == 0x85) { /* enable or disable super IO configure */ 156 memory_region_set_enabled(&vt686->superio, val & 0x2); 157 } 158 } 159 160 #define ACPI_DBG_IO_ADDR 0xb044 161 162 typedef struct VT686PMState { 163 PCIDevice dev; 164 MemoryRegion io; 165 ACPIREGS ar; 166 APMState apm; 167 PMSMBus smb; 168 uint32_t smb_io_base; 169 } VT686PMState; 170 171 typedef struct VT686AC97State { 172 PCIDevice dev; 173 } VT686AC97State; 174 175 typedef struct VT686MC97State { 176 PCIDevice dev; 177 } VT686MC97State; 178 179 #define TYPE_VT82C686B_PM_DEVICE "VT82C686B_PM" 180 #define VT82C686B_PM_DEVICE(obj) \ 181 OBJECT_CHECK(VT686PMState, (obj), TYPE_VT82C686B_PM_DEVICE) 182 183 #define TYPE_VT82C686B_MC97_DEVICE "VT82C686B_MC97" 184 #define VT82C686B_MC97_DEVICE(obj) \ 185 OBJECT_CHECK(VT686MC97State, (obj), TYPE_VT82C686B_MC97_DEVICE) 186 187 #define TYPE_VT82C686B_AC97_DEVICE "VT82C686B_AC97" 188 #define VT82C686B_AC97_DEVICE(obj) \ 189 OBJECT_CHECK(VT686AC97State, (obj), TYPE_VT82C686B_AC97_DEVICE) 190 191 static void pm_update_sci(VT686PMState *s) 192 { 193 int sci_level, pmsts; 194 195 pmsts = acpi_pm1_evt_get_sts(&s->ar); 196 sci_level = (((pmsts & s->ar.pm1.evt.en) & 197 (ACPI_BITMASK_RT_CLOCK_ENABLE | 198 ACPI_BITMASK_POWER_BUTTON_ENABLE | 199 ACPI_BITMASK_GLOBAL_LOCK_ENABLE | 200 ACPI_BITMASK_TIMER_ENABLE)) != 0); 201 pci_set_irq(&s->dev, sci_level); 202 /* schedule a timer interruption if needed */ 203 acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) && 204 !(pmsts & ACPI_BITMASK_TIMER_STATUS)); 205 } 206 207 static void pm_tmr_timer(ACPIREGS *ar) 208 { 209 VT686PMState *s = container_of(ar, VT686PMState, ar); 210 pm_update_sci(s); 211 } 212 213 static void pm_io_space_update(VT686PMState *s) 214 { 215 uint32_t pm_io_base; 216 217 pm_io_base = pci_get_long(s->dev.config + 0x40); 218 pm_io_base &= 0xffc0; 219 220 memory_region_transaction_begin(); 221 memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1); 222 memory_region_set_address(&s->io, pm_io_base); 223 memory_region_transaction_commit(); 224 } 225 226 static void pm_write_config(PCIDevice *d, 227 uint32_t address, uint32_t val, int len) 228 { 229 DPRINTF("pm_write_config address 0x%x val 0x%x len 0x%x\n", 230 address, val, len); 231 pci_default_write_config(d, address, val, len); 232 } 233 234 static int vmstate_acpi_post_load(void *opaque, int version_id) 235 { 236 VT686PMState *s = opaque; 237 238 pm_io_space_update(s); 239 return 0; 240 } 241 242 static const VMStateDescription vmstate_acpi = { 243 .name = "vt82c686b_pm", 244 .version_id = 1, 245 .minimum_version_id = 1, 246 .post_load = vmstate_acpi_post_load, 247 .fields = (VMStateField[]) { 248 VMSTATE_PCI_DEVICE(dev, VT686PMState), 249 VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState), 250 VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState), 251 VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState), 252 VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState), 253 VMSTATE_TIMER_PTR(ar.tmr.timer, VT686PMState), 254 VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState), 255 VMSTATE_END_OF_LIST() 256 } 257 }; 258 259 /* 260 * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init() 261 * just register a PCI device now, functionalities will be implemented later. 262 */ 263 264 static void vt82c686b_ac97_realize(PCIDevice *dev, Error **errp) 265 { 266 VT686AC97State *s = VT82C686B_AC97_DEVICE(dev); 267 uint8_t *pci_conf = s->dev.config; 268 269 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE | 270 PCI_COMMAND_PARITY); 271 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST | 272 PCI_STATUS_DEVSEL_MEDIUM); 273 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03); 274 } 275 276 void vt82c686b_ac97_init(PCIBus *bus, int devfn) 277 { 278 PCIDevice *dev; 279 280 dev = pci_create(bus, devfn, TYPE_VT82C686B_AC97_DEVICE); 281 qdev_init_nofail(&dev->qdev); 282 } 283 284 static void via_ac97_class_init(ObjectClass *klass, void *data) 285 { 286 DeviceClass *dc = DEVICE_CLASS(klass); 287 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 288 289 k->realize = vt82c686b_ac97_realize; 290 k->vendor_id = PCI_VENDOR_ID_VIA; 291 k->device_id = PCI_DEVICE_ID_VIA_AC97; 292 k->revision = 0x50; 293 k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO; 294 set_bit(DEVICE_CATEGORY_SOUND, dc->categories); 295 dc->desc = "AC97"; 296 } 297 298 static const TypeInfo via_ac97_info = { 299 .name = TYPE_VT82C686B_AC97_DEVICE, 300 .parent = TYPE_PCI_DEVICE, 301 .instance_size = sizeof(VT686AC97State), 302 .class_init = via_ac97_class_init, 303 .interfaces = (InterfaceInfo[]) { 304 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 305 { }, 306 }, 307 }; 308 309 static void vt82c686b_mc97_realize(PCIDevice *dev, Error **errp) 310 { 311 VT686MC97State *s = VT82C686B_MC97_DEVICE(dev); 312 uint8_t *pci_conf = s->dev.config; 313 314 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE | 315 PCI_COMMAND_VGA_PALETTE); 316 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM); 317 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03); 318 } 319 320 void vt82c686b_mc97_init(PCIBus *bus, int devfn) 321 { 322 PCIDevice *dev; 323 324 dev = pci_create(bus, devfn, TYPE_VT82C686B_MC97_DEVICE); 325 qdev_init_nofail(&dev->qdev); 326 } 327 328 static void via_mc97_class_init(ObjectClass *klass, void *data) 329 { 330 DeviceClass *dc = DEVICE_CLASS(klass); 331 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 332 333 k->realize = vt82c686b_mc97_realize; 334 k->vendor_id = PCI_VENDOR_ID_VIA; 335 k->device_id = PCI_DEVICE_ID_VIA_MC97; 336 k->class_id = PCI_CLASS_COMMUNICATION_OTHER; 337 k->revision = 0x30; 338 set_bit(DEVICE_CATEGORY_NETWORK, dc->categories); 339 dc->desc = "MC97"; 340 } 341 342 static const TypeInfo via_mc97_info = { 343 .name = TYPE_VT82C686B_MC97_DEVICE, 344 .parent = TYPE_PCI_DEVICE, 345 .instance_size = sizeof(VT686MC97State), 346 .class_init = via_mc97_class_init, 347 .interfaces = (InterfaceInfo[]) { 348 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 349 { }, 350 }, 351 }; 352 353 /* vt82c686 pm init */ 354 static void vt82c686b_pm_realize(PCIDevice *dev, Error **errp) 355 { 356 VT686PMState *s = VT82C686B_PM_DEVICE(dev); 357 uint8_t *pci_conf; 358 359 pci_conf = s->dev.config; 360 pci_set_word(pci_conf + PCI_COMMAND, 0); 361 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK | 362 PCI_STATUS_DEVSEL_MEDIUM); 363 364 /* 0x48-0x4B is Power Management I/O Base */ 365 pci_set_long(pci_conf + 0x48, 0x00000001); 366 367 /* SMB ports:0xeee0~0xeeef */ 368 s->smb_io_base =((s->smb_io_base & 0xfff0) + 0x0); 369 pci_conf[0x90] = s->smb_io_base | 1; 370 pci_conf[0x91] = s->smb_io_base >> 8; 371 pci_conf[0xd2] = 0x90; 372 pm_smbus_init(DEVICE(s), &s->smb, false); 373 memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io); 374 375 apm_init(dev, &s->apm, NULL, s); 376 377 memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64); 378 memory_region_set_enabled(&s->io, false); 379 memory_region_add_subregion(get_system_io(), 0, &s->io); 380 381 acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io); 382 acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io); 383 acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2); 384 } 385 386 I2CBus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base, 387 qemu_irq sci_irq) 388 { 389 PCIDevice *dev; 390 VT686PMState *s; 391 392 dev = pci_create(bus, devfn, TYPE_VT82C686B_PM_DEVICE); 393 qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base); 394 395 s = VT82C686B_PM_DEVICE(dev); 396 397 qdev_init_nofail(&dev->qdev); 398 399 return s->smb.smbus; 400 } 401 402 static Property via_pm_properties[] = { 403 DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0), 404 DEFINE_PROP_END_OF_LIST(), 405 }; 406 407 static void via_pm_class_init(ObjectClass *klass, void *data) 408 { 409 DeviceClass *dc = DEVICE_CLASS(klass); 410 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 411 412 k->realize = vt82c686b_pm_realize; 413 k->config_write = pm_write_config; 414 k->vendor_id = PCI_VENDOR_ID_VIA; 415 k->device_id = PCI_DEVICE_ID_VIA_ACPI; 416 k->class_id = PCI_CLASS_BRIDGE_OTHER; 417 k->revision = 0x40; 418 dc->desc = "PM"; 419 dc->vmsd = &vmstate_acpi; 420 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 421 dc->props = via_pm_properties; 422 } 423 424 static const TypeInfo via_pm_info = { 425 .name = TYPE_VT82C686B_PM_DEVICE, 426 .parent = TYPE_PCI_DEVICE, 427 .instance_size = sizeof(VT686PMState), 428 .class_init = via_pm_class_init, 429 .interfaces = (InterfaceInfo[]) { 430 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 431 { }, 432 }, 433 }; 434 435 static const VMStateDescription vmstate_via = { 436 .name = "vt82c686b", 437 .version_id = 1, 438 .minimum_version_id = 1, 439 .fields = (VMStateField[]) { 440 VMSTATE_PCI_DEVICE(dev, VT82C686BState), 441 VMSTATE_END_OF_LIST() 442 } 443 }; 444 445 /* init the PCI-to-ISA bridge */ 446 static void vt82c686b_realize(PCIDevice *d, Error **errp) 447 { 448 VT82C686BState *vt82c = VT82C686B_DEVICE(d); 449 uint8_t *pci_conf; 450 ISABus *isa_bus; 451 uint8_t *wmask; 452 int i; 453 454 isa_bus = isa_bus_new(DEVICE(d), get_system_memory(), 455 pci_address_space_io(d), errp); 456 if (!isa_bus) { 457 return; 458 } 459 460 pci_conf = d->config; 461 pci_config_set_prog_interface(pci_conf, 0x0); 462 463 wmask = d->wmask; 464 for (i = 0x00; i < 0xff; i++) { 465 if (i<=0x03 || (i>=0x08 && i<=0x3f)) { 466 wmask[i] = 0x00; 467 } 468 } 469 470 memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops, 471 &vt82c->superio_conf, "superio", 2); 472 memory_region_set_enabled(&vt82c->superio, false); 473 /* The floppy also uses 0x3f0 and 0x3f1. 474 * But we do not emulate a floppy, so just set it here. */ 475 memory_region_add_subregion(isa_bus->address_space_io, 0x3f0, 476 &vt82c->superio); 477 } 478 479 ISABus *vt82c686b_isa_init(PCIBus *bus, int devfn) 480 { 481 PCIDevice *d; 482 483 d = pci_create_simple_multifunction(bus, devfn, true, 484 TYPE_VT82C686B_DEVICE); 485 486 return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0")); 487 } 488 489 static void via_class_init(ObjectClass *klass, void *data) 490 { 491 DeviceClass *dc = DEVICE_CLASS(klass); 492 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 493 494 k->realize = vt82c686b_realize; 495 k->config_write = vt82c686b_write_config; 496 k->vendor_id = PCI_VENDOR_ID_VIA; 497 k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE; 498 k->class_id = PCI_CLASS_BRIDGE_ISA; 499 k->revision = 0x40; 500 dc->reset = vt82c686b_isa_reset; 501 dc->desc = "ISA bridge"; 502 dc->vmsd = &vmstate_via; 503 /* 504 * Reason: part of VIA VT82C686 southbridge, needs to be wired up, 505 * e.g. by mips_fulong2e_init() 506 */ 507 dc->user_creatable = false; 508 } 509 510 static const TypeInfo via_info = { 511 .name = TYPE_VT82C686B_DEVICE, 512 .parent = TYPE_PCI_DEVICE, 513 .instance_size = sizeof(VT82C686BState), 514 .class_init = via_class_init, 515 .interfaces = (InterfaceInfo[]) { 516 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 517 { }, 518 }, 519 }; 520 521 static void vt82c686b_superio_class_init(ObjectClass *klass, void *data) 522 { 523 ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass); 524 525 sc->serial.count = 2; 526 sc->parallel.count = 1; 527 sc->ide.count = 0; 528 sc->floppy.count = 1; 529 } 530 531 static const TypeInfo via_superio_info = { 532 .name = TYPE_VT82C686B_SUPERIO, 533 .parent = TYPE_ISA_SUPERIO, 534 .instance_size = sizeof(ISASuperIODevice), 535 .class_size = sizeof(ISASuperIOClass), 536 .class_init = vt82c686b_superio_class_init, 537 }; 538 539 static void vt82c686b_register_types(void) 540 { 541 type_register_static(&via_ac97_info); 542 type_register_static(&via_mc97_info); 543 type_register_static(&via_pm_info); 544 type_register_static(&via_superio_info); 545 type_register_static(&via_info); 546 } 547 548 type_init(vt82c686b_register_types) 549