xref: /openbmc/qemu/hw/isa/vt82c686.c (revision 7d87775f)
1 /*
2  * VT82C686B south bridge support
3  *
4  * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
5  * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
6  * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
7  * This code is licensed under the GNU GPL v2.
8  *
9  * Contributions after 2012-01-13 are licensed under the terms of the
10  * GNU GPL, version 2 or (at your option) any later version.
11  *
12  * VT8231 south bridge support and general clean up to allow it
13  * Copyright (c) 2018-2020 BALATON Zoltan
14  */
15 
16 #include "qemu/osdep.h"
17 #include "hw/isa/vt82c686.h"
18 #include "hw/block/fdc.h"
19 #include "hw/char/parallel-isa.h"
20 #include "hw/char/serial-isa.h"
21 #include "hw/pci/pci.h"
22 #include "hw/qdev-properties.h"
23 #include "hw/ide/pci.h"
24 #include "hw/isa/isa.h"
25 #include "hw/isa/superio.h"
26 #include "hw/intc/i8259.h"
27 #include "hw/irq.h"
28 #include "hw/dma/i8257.h"
29 #include "hw/usb/hcd-uhci-pci.h"
30 #include "hw/timer/i8254.h"
31 #include "hw/rtc/mc146818rtc.h"
32 #include "migration/vmstate.h"
33 #include "hw/isa/apm.h"
34 #include "hw/acpi/acpi.h"
35 #include "hw/i2c/pm_smbus.h"
36 #include "qapi/error.h"
37 #include "qemu/log.h"
38 #include "qemu/module.h"
39 #include "qemu/range.h"
40 #include "qemu/timer.h"
41 #include "trace.h"
42 
43 #define TYPE_VIA_PM "via-pm"
44 OBJECT_DECLARE_SIMPLE_TYPE(ViaPMState, VIA_PM)
45 
46 struct ViaPMState {
47     PCIDevice dev;
48     MemoryRegion io;
49     ACPIREGS ar;
50     APMState apm;
51     PMSMBus smb;
52 };
53 
54 static void pm_io_space_update(ViaPMState *s)
55 {
56     uint32_t pmbase = pci_get_long(s->dev.config + 0x48) & 0xff80UL;
57 
58     memory_region_transaction_begin();
59     memory_region_set_address(&s->io, pmbase);
60     memory_region_set_enabled(&s->io, s->dev.config[0x41] & BIT(7));
61     memory_region_transaction_commit();
62 }
63 
64 static void smb_io_space_update(ViaPMState *s)
65 {
66     uint32_t smbase = pci_get_long(s->dev.config + 0x90) & 0xfff0UL;
67 
68     memory_region_transaction_begin();
69     memory_region_set_address(&s->smb.io, smbase);
70     memory_region_set_enabled(&s->smb.io, s->dev.config[0xd2] & BIT(0));
71     memory_region_transaction_commit();
72 }
73 
74 static int vmstate_acpi_post_load(void *opaque, int version_id)
75 {
76     ViaPMState *s = opaque;
77 
78     pm_io_space_update(s);
79     smb_io_space_update(s);
80     return 0;
81 }
82 
83 static const VMStateDescription vmstate_acpi = {
84     .name = "vt82c686b_pm",
85     .version_id = 1,
86     .minimum_version_id = 1,
87     .post_load = vmstate_acpi_post_load,
88     .fields = (const VMStateField[]) {
89         VMSTATE_PCI_DEVICE(dev, ViaPMState),
90         VMSTATE_UINT16(ar.pm1.evt.sts, ViaPMState),
91         VMSTATE_UINT16(ar.pm1.evt.en, ViaPMState),
92         VMSTATE_UINT16(ar.pm1.cnt.cnt, ViaPMState),
93         VMSTATE_STRUCT(apm, ViaPMState, 0, vmstate_apm, APMState),
94         VMSTATE_TIMER_PTR(ar.tmr.timer, ViaPMState),
95         VMSTATE_INT64(ar.tmr.overflow_time, ViaPMState),
96         VMSTATE_END_OF_LIST()
97     }
98 };
99 
100 static void pm_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int len)
101 {
102     ViaPMState *s = VIA_PM(d);
103 
104     trace_via_pm_write(addr, val, len);
105     pci_default_write_config(d, addr, val, len);
106     if (ranges_overlap(addr, len, 0x48, 4)) {
107         uint32_t v = pci_get_long(s->dev.config + 0x48);
108         pci_set_long(s->dev.config + 0x48, (v & 0xff80UL) | 1);
109     }
110     if (range_covers_byte(addr, len, 0x41)) {
111         pm_io_space_update(s);
112     }
113     if (ranges_overlap(addr, len, 0x90, 4)) {
114         uint32_t v = pci_get_long(s->dev.config + 0x90);
115         pci_set_long(s->dev.config + 0x90, (v & 0xfff0UL) | 1);
116     }
117     if (range_covers_byte(addr, len, 0xd2)) {
118         s->dev.config[0xd2] &= 0xf;
119         smb_io_space_update(s);
120     }
121 }
122 
123 static void pm_io_write(void *op, hwaddr addr, uint64_t data, unsigned size)
124 {
125     trace_via_pm_io_write(addr, data, size);
126 }
127 
128 static uint64_t pm_io_read(void *op, hwaddr addr, unsigned size)
129 {
130     trace_via_pm_io_read(addr, 0, size);
131     return 0;
132 }
133 
134 static const MemoryRegionOps pm_io_ops = {
135     .read = pm_io_read,
136     .write = pm_io_write,
137     .endianness = DEVICE_NATIVE_ENDIAN,
138     .impl = {
139         .min_access_size = 1,
140         .max_access_size = 1,
141     },
142 };
143 
144 static void pm_update_sci(ViaPMState *s)
145 {
146     int sci_level, pmsts;
147 
148     pmsts = acpi_pm1_evt_get_sts(&s->ar);
149     sci_level = (((pmsts & s->ar.pm1.evt.en) &
150                   (ACPI_BITMASK_RT_CLOCK_ENABLE |
151                    ACPI_BITMASK_POWER_BUTTON_ENABLE |
152                    ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
153                    ACPI_BITMASK_TIMER_ENABLE)) != 0);
154     if (pci_get_byte(s->dev.config + PCI_INTERRUPT_PIN)) {
155         /*
156          * FIXME:
157          * Fix device model that realizes this PM device and remove
158          * this work around.
159          * The device model should wire SCI and setup
160          * PCI_INTERRUPT_PIN properly.
161          * If PIN# = 0(interrupt pin isn't used), don't raise SCI as
162          * work around.
163          */
164         pci_set_irq(&s->dev, sci_level);
165     }
166     /* schedule a timer interruption if needed */
167     acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
168                        !(pmsts & ACPI_BITMASK_TIMER_STATUS));
169 }
170 
171 static void pm_tmr_timer(ACPIREGS *ar)
172 {
173     ViaPMState *s = container_of(ar, ViaPMState, ar);
174     pm_update_sci(s);
175 }
176 
177 static void via_pm_reset(DeviceState *d)
178 {
179     ViaPMState *s = VIA_PM(d);
180 
181     memset(s->dev.config + PCI_CONFIG_HEADER_SIZE, 0,
182            PCI_CONFIG_SPACE_SIZE - PCI_CONFIG_HEADER_SIZE);
183     /* Power Management IO base */
184     pci_set_long(s->dev.config + 0x48, 1);
185     /* SMBus IO base */
186     pci_set_long(s->dev.config + 0x90, 1);
187 
188     acpi_pm1_evt_reset(&s->ar);
189     acpi_pm1_cnt_reset(&s->ar);
190     acpi_pm_tmr_reset(&s->ar);
191     pm_update_sci(s);
192 
193     pm_io_space_update(s);
194     smb_io_space_update(s);
195 }
196 
197 static void via_pm_realize(PCIDevice *dev, Error **errp)
198 {
199     ViaPMState *s = VIA_PM(dev);
200 
201     pci_set_word(dev->config + PCI_STATUS, PCI_STATUS_FAST_BACK |
202                  PCI_STATUS_DEVSEL_MEDIUM);
203 
204     pm_smbus_init(DEVICE(s), &s->smb, false);
205     memory_region_add_subregion(pci_address_space_io(dev), 0, &s->smb.io);
206     memory_region_set_enabled(&s->smb.io, false);
207 
208     apm_init(dev, &s->apm, NULL, s);
209 
210     memory_region_init_io(&s->io, OBJECT(dev), &pm_io_ops, s, "via-pm", 128);
211     memory_region_add_subregion(pci_address_space_io(dev), 0, &s->io);
212     memory_region_set_enabled(&s->io, false);
213 
214     acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
215     acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
216     acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2, false);
217 }
218 
219 typedef struct via_pm_init_info {
220     uint16_t device_id;
221 } ViaPMInitInfo;
222 
223 static void via_pm_class_init(ObjectClass *klass, void *data)
224 {
225     DeviceClass *dc = DEVICE_CLASS(klass);
226     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
227     ViaPMInitInfo *info = data;
228 
229     k->realize = via_pm_realize;
230     k->config_write = pm_write_config;
231     k->vendor_id = PCI_VENDOR_ID_VIA;
232     k->device_id = info->device_id;
233     k->class_id = PCI_CLASS_BRIDGE_OTHER;
234     k->revision = 0x40;
235     device_class_set_legacy_reset(dc, via_pm_reset);
236     /* Reason: part of VIA south bridge, does not exist stand alone */
237     dc->user_creatable = false;
238     dc->vmsd = &vmstate_acpi;
239 }
240 
241 static const TypeInfo via_pm_info = {
242     .name          = TYPE_VIA_PM,
243     .parent        = TYPE_PCI_DEVICE,
244     .instance_size = sizeof(ViaPMState),
245     .abstract      = true,
246     .interfaces = (InterfaceInfo[]) {
247         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
248         { },
249     },
250 };
251 
252 static const ViaPMInitInfo vt82c686b_pm_init_info = {
253     .device_id = PCI_DEVICE_ID_VIA_82C686B_PM,
254 };
255 
256 #define TYPE_VT82C686B_PM "vt82c686b-pm"
257 
258 static const TypeInfo vt82c686b_pm_info = {
259     .name          = TYPE_VT82C686B_PM,
260     .parent        = TYPE_VIA_PM,
261     .class_init    = via_pm_class_init,
262     .class_data    = (void *)&vt82c686b_pm_init_info,
263 };
264 
265 static const ViaPMInitInfo vt8231_pm_init_info = {
266     .device_id = PCI_DEVICE_ID_VIA_8231_PM,
267 };
268 
269 #define TYPE_VT8231_PM "vt8231-pm"
270 
271 static const TypeInfo vt8231_pm_info = {
272     .name          = TYPE_VT8231_PM,
273     .parent        = TYPE_VIA_PM,
274     .class_init    = via_pm_class_init,
275     .class_data    = (void *)&vt8231_pm_init_info,
276 };
277 
278 
279 #define TYPE_VIA_SUPERIO "via-superio"
280 OBJECT_DECLARE_SIMPLE_TYPE(ViaSuperIOState, VIA_SUPERIO)
281 
282 struct ViaSuperIOState {
283     ISASuperIODevice superio;
284     uint8_t regs[0x100];
285     const MemoryRegionOps *io_ops;
286     MemoryRegion io;
287 };
288 
289 static inline void via_superio_io_enable(ViaSuperIOState *s, bool enable)
290 {
291     memory_region_set_enabled(&s->io, enable);
292 }
293 
294 static void via_superio_realize(DeviceState *d, Error **errp)
295 {
296     ViaSuperIOState *s = VIA_SUPERIO(d);
297     ISASuperIOClass *ic = ISA_SUPERIO_GET_CLASS(s);
298     Error *local_err = NULL;
299 
300     assert(s->io_ops);
301     ic->parent_realize(d, &local_err);
302     if (local_err) {
303         error_propagate(errp, local_err);
304         return;
305     }
306     memory_region_init_io(&s->io, OBJECT(d), s->io_ops, s, "via-superio", 2);
307     memory_region_set_enabled(&s->io, false);
308     /* The floppy also uses 0x3f0 and 0x3f1 but this seems to work anyway */
309     memory_region_add_subregion(isa_address_space_io(ISA_DEVICE(s)), 0x3f0,
310                                 &s->io);
311 }
312 
313 static uint64_t via_superio_cfg_read(void *opaque, hwaddr addr, unsigned size)
314 {
315     ViaSuperIOState *sc = opaque;
316     uint8_t idx = sc->regs[0];
317     uint8_t val = sc->regs[idx];
318 
319     if (addr == 0) {
320         return idx;
321     }
322     if (addr == 1 && idx == 0) {
323         val = 0; /* reading reg 0 where we store index value */
324     }
325     trace_via_superio_read(idx, val);
326     return val;
327 }
328 
329 static void via_superio_devices_enable(ViaSuperIOState *s, uint8_t data)
330 {
331     ISASuperIOClass *ic = ISA_SUPERIO_GET_CLASS(s);
332 
333     isa_parallel_set_enabled(s->superio.parallel[0], (data & 0x3) != 3);
334     for (int i = 0; i < ic->serial.count; i++) {
335         isa_serial_set_enabled(s->superio.serial[i], data & BIT(i + 2));
336     }
337     isa_fdc_set_enabled(s->superio.floppy, data & BIT(4));
338 }
339 
340 static void via_superio_class_init(ObjectClass *klass, void *data)
341 {
342     DeviceClass *dc = DEVICE_CLASS(klass);
343     ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass);
344 
345     device_class_set_parent_realize(dc, via_superio_realize,
346                                     &sc->parent_realize);
347 }
348 
349 static const TypeInfo via_superio_info = {
350     .name          = TYPE_VIA_SUPERIO,
351     .parent        = TYPE_ISA_SUPERIO,
352     .instance_size = sizeof(ViaSuperIOState),
353     .class_size    = sizeof(ISASuperIOClass),
354     .class_init    = via_superio_class_init,
355     .abstract      = true,
356 };
357 
358 #define TYPE_VT82C686B_SUPERIO "vt82c686b-superio"
359 
360 static void vt82c686b_superio_cfg_write(void *opaque, hwaddr addr,
361                                         uint64_t data, unsigned size)
362 {
363     ViaSuperIOState *sc = opaque;
364     uint8_t idx = sc->regs[0];
365 
366     if (addr == 0) { /* config index register */
367         sc->regs[0] = data;
368         return;
369     }
370 
371     /* config data register */
372     trace_via_superio_write(idx, data);
373     switch (idx) {
374     case 0x00 ... 0xdf:
375     case 0xe4:
376     case 0xe5:
377     case 0xe9 ... 0xed:
378     case 0xf3:
379     case 0xf5:
380     case 0xf7:
381     case 0xf9 ... 0xfb:
382     case 0xfd ... 0xff:
383         /* ignore write to read only registers */
384         return;
385     case 0xe2:
386         data &= 0x1f;
387         via_superio_devices_enable(sc, data);
388         break;
389     case 0xe3:
390         data &= 0xfc;
391         isa_fdc_set_iobase(sc->superio.floppy, data << 2);
392         break;
393     case 0xe6:
394         isa_parallel_set_iobase(sc->superio.parallel[0], data << 2);
395         break;
396     case 0xe7:
397         data &= 0xfe;
398         isa_serial_set_iobase(sc->superio.serial[0], data << 2);
399         break;
400     case 0xe8:
401         data &= 0xfe;
402         isa_serial_set_iobase(sc->superio.serial[1], data << 2);
403         break;
404     default:
405         qemu_log_mask(LOG_UNIMP,
406                       "via_superio_cfg: unimplemented register 0x%x\n", idx);
407         break;
408     }
409     sc->regs[idx] = data;
410 }
411 
412 static const MemoryRegionOps vt82c686b_superio_cfg_ops = {
413     .read = via_superio_cfg_read,
414     .write = vt82c686b_superio_cfg_write,
415     .endianness = DEVICE_NATIVE_ENDIAN,
416     .impl = {
417         .min_access_size = 1,
418         .max_access_size = 1,
419     },
420 };
421 
422 static void vt82c686b_superio_reset(DeviceState *dev)
423 {
424     ViaSuperIOState *s = VIA_SUPERIO(dev);
425 
426     memset(s->regs, 0, sizeof(s->regs));
427     /* Device ID */
428     vt82c686b_superio_cfg_write(s, 0, 0xe0, 1);
429     vt82c686b_superio_cfg_write(s, 1, 0x3c, 1);
430     /*
431      * Function select - only serial enabled
432      * Fuloong 2e's rescue-yl prints to the serial console w/o enabling it. This
433      * suggests that the serial ports are enabled by default, so override the
434      * datasheet.
435      */
436     vt82c686b_superio_cfg_write(s, 0, 0xe2, 1);
437     vt82c686b_superio_cfg_write(s, 1, 0x0f, 1);
438     /* Floppy ctrl base addr 0x3f0-7 */
439     vt82c686b_superio_cfg_write(s, 0, 0xe3, 1);
440     vt82c686b_superio_cfg_write(s, 1, 0xfc, 1);
441     /* Parallel port base addr 0x378-f */
442     vt82c686b_superio_cfg_write(s, 0, 0xe6, 1);
443     vt82c686b_superio_cfg_write(s, 1, 0xde, 1);
444     /* Serial port 1 base addr 0x3f8-f */
445     vt82c686b_superio_cfg_write(s, 0, 0xe7, 1);
446     vt82c686b_superio_cfg_write(s, 1, 0xfe, 1);
447     /* Serial port 2 base addr 0x2f8-f */
448     vt82c686b_superio_cfg_write(s, 0, 0xe8, 1);
449     vt82c686b_superio_cfg_write(s, 1, 0xbe, 1);
450 
451     vt82c686b_superio_cfg_write(s, 0, 0, 1);
452 }
453 
454 static void vt82c686b_superio_init(Object *obj)
455 {
456     VIA_SUPERIO(obj)->io_ops = &vt82c686b_superio_cfg_ops;
457 }
458 
459 static void vt82c686b_superio_class_init(ObjectClass *klass, void *data)
460 {
461     DeviceClass *dc = DEVICE_CLASS(klass);
462     ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass);
463 
464     device_class_set_legacy_reset(dc, vt82c686b_superio_reset);
465     sc->serial.count = 2;
466     sc->parallel.count = 1;
467     sc->ide.count = 0; /* emulated by via-ide */
468     sc->floppy.count = 1;
469 }
470 
471 static const TypeInfo vt82c686b_superio_info = {
472     .name          = TYPE_VT82C686B_SUPERIO,
473     .parent        = TYPE_VIA_SUPERIO,
474     .instance_size = sizeof(ViaSuperIOState),
475     .instance_init = vt82c686b_superio_init,
476     .class_size    = sizeof(ISASuperIOClass),
477     .class_init    = vt82c686b_superio_class_init,
478 };
479 
480 
481 #define TYPE_VT8231_SUPERIO "vt8231-superio"
482 
483 static void vt8231_superio_cfg_write(void *opaque, hwaddr addr,
484                                      uint64_t data, unsigned size)
485 {
486     ViaSuperIOState *sc = opaque;
487     uint8_t idx = sc->regs[0];
488 
489     if (addr == 0) { /* config index register */
490         sc->regs[0] = data;
491         return;
492     }
493 
494     /* config data register */
495     trace_via_superio_write(idx, data);
496     switch (idx) {
497     case 0x00 ... 0xdf:
498     case 0xe7 ... 0xef:
499     case 0xf0 ... 0xf1:
500     case 0xf5:
501     case 0xf8:
502     case 0xfd:
503         /* ignore write to read only registers */
504         return;
505     case 0xf2:
506         data &= 0x17;
507         via_superio_devices_enable(sc, data);
508         break;
509     case 0xf4:
510         data &= 0xfe;
511         isa_serial_set_iobase(sc->superio.serial[0], data << 2);
512         break;
513     case 0xf6:
514         isa_parallel_set_iobase(sc->superio.parallel[0], data << 2);
515         break;
516     case 0xf7:
517         data &= 0xfc;
518         isa_fdc_set_iobase(sc->superio.floppy, data << 2);
519         break;
520     default:
521         qemu_log_mask(LOG_UNIMP,
522                       "via_superio_cfg: unimplemented register 0x%x\n", idx);
523         break;
524     }
525     sc->regs[idx] = data;
526 }
527 
528 static const MemoryRegionOps vt8231_superio_cfg_ops = {
529     .read = via_superio_cfg_read,
530     .write = vt8231_superio_cfg_write,
531     .endianness = DEVICE_NATIVE_ENDIAN,
532     .impl = {
533         .min_access_size = 1,
534         .max_access_size = 1,
535     },
536 };
537 
538 static void vt8231_superio_reset(DeviceState *dev)
539 {
540     ViaSuperIOState *s = VIA_SUPERIO(dev);
541 
542     memset(s->regs, 0, sizeof(s->regs));
543     /* Device ID */
544     s->regs[0xf0] = 0x3c;
545     /* Device revision */
546     s->regs[0xf1] = 0x01;
547     /* Function select - all disabled */
548     vt8231_superio_cfg_write(s, 0, 0xf2, 1);
549     vt8231_superio_cfg_write(s, 1, 0x03, 1);
550     /* Serial port base addr */
551     vt8231_superio_cfg_write(s, 0, 0xf4, 1);
552     vt8231_superio_cfg_write(s, 1, 0xfe, 1);
553     /* Parallel port base addr */
554     vt8231_superio_cfg_write(s, 0, 0xf6, 1);
555     vt8231_superio_cfg_write(s, 1, 0xde, 1);
556     /* Floppy ctrl base addr */
557     vt8231_superio_cfg_write(s, 0, 0xf7, 1);
558     vt8231_superio_cfg_write(s, 1, 0xfc, 1);
559 
560     vt8231_superio_cfg_write(s, 0, 0, 1);
561 }
562 
563 static void vt8231_superio_init(Object *obj)
564 {
565     VIA_SUPERIO(obj)->io_ops = &vt8231_superio_cfg_ops;
566 }
567 
568 static void vt8231_superio_class_init(ObjectClass *klass, void *data)
569 {
570     DeviceClass *dc = DEVICE_CLASS(klass);
571     ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass);
572 
573     device_class_set_legacy_reset(dc, vt8231_superio_reset);
574     sc->serial.count = 1;
575     sc->parallel.count = 1;
576     sc->ide.count = 0; /* emulated by via-ide */
577     sc->floppy.count = 1;
578 }
579 
580 static const TypeInfo vt8231_superio_info = {
581     .name          = TYPE_VT8231_SUPERIO,
582     .parent        = TYPE_VIA_SUPERIO,
583     .instance_size = sizeof(ViaSuperIOState),
584     .instance_init = vt8231_superio_init,
585     .class_size    = sizeof(ISASuperIOClass),
586     .class_init    = vt8231_superio_class_init,
587 };
588 
589 
590 #define TYPE_VIA_ISA "via-isa"
591 OBJECT_DECLARE_SIMPLE_TYPE(ViaISAState, VIA_ISA)
592 
593 struct ViaISAState {
594     PCIDevice dev;
595 
596     IRQState i8259_irq;
597     qemu_irq cpu_intr;
598     qemu_irq *isa_irqs_in;
599     uint16_t irq_state[ISA_NUM_IRQS];
600     ViaSuperIOState via_sio;
601     MC146818RtcState rtc;
602     PCIIDEState ide;
603     UHCIPCIState uhci[2];
604     ViaPMState pm;
605     ViaAC97State ac97;
606     PCIDevice mc97;
607 };
608 
609 static const VMStateDescription vmstate_via = {
610     .name = "via-isa",
611     .version_id = 1,
612     .minimum_version_id = 1,
613     .fields = (const VMStateField[]) {
614         VMSTATE_PCI_DEVICE(dev, ViaISAState),
615         VMSTATE_END_OF_LIST()
616     }
617 };
618 
619 static void via_isa_init(Object *obj)
620 {
621     ViaISAState *s = VIA_ISA(obj);
622 
623     object_initialize_child(obj, "rtc", &s->rtc, TYPE_MC146818_RTC);
624     object_initialize_child(obj, "ide", &s->ide, TYPE_VIA_IDE);
625     object_initialize_child(obj, "uhci1", &s->uhci[0], TYPE_VT82C686B_USB_UHCI);
626     object_initialize_child(obj, "uhci2", &s->uhci[1], TYPE_VT82C686B_USB_UHCI);
627     object_initialize_child(obj, "ac97", &s->ac97, TYPE_VIA_AC97);
628     object_initialize_child(obj, "mc97", &s->mc97, TYPE_VIA_MC97);
629 }
630 
631 static const TypeInfo via_isa_info = {
632     .name          = TYPE_VIA_ISA,
633     .parent        = TYPE_PCI_DEVICE,
634     .instance_size = sizeof(ViaISAState),
635     .instance_init = via_isa_init,
636     .abstract      = true,
637     .interfaces    = (InterfaceInfo[]) {
638         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
639         { },
640     },
641 };
642 
643 static int via_isa_get_pci_irq(const ViaISAState *s, int pin)
644 {
645     switch (pin) {
646     case 0:
647         return s->dev.config[0x55] >> 4;
648     case 1:
649         return s->dev.config[0x56] & 0xf;
650     case 2:
651         return s->dev.config[0x56] >> 4;
652     case 3:
653         return s->dev.config[0x57] >> 4;
654     }
655     return 0;
656 }
657 
658 void via_isa_set_irq(PCIDevice *d, int pin, int level)
659 {
660     ViaISAState *s = VIA_ISA(pci_get_function_0(d));
661     uint8_t irq = d->config[PCI_INTERRUPT_LINE], max_irq = 15;
662     int f = PCI_FUNC(d->devfn);
663     uint16_t mask;
664 
665     switch (f) {
666     case 0: /* PIRQ/PINT inputs */
667         irq = via_isa_get_pci_irq(s, pin);
668         f = 8 + pin; /* Use function 8-11 for PCI interrupt inputs */
669         break;
670     case 2: /* USB ports 0-1 */
671     case 3: /* USB ports 2-3 */
672     case 5: /* AC97 audio */
673         max_irq = 14;
674         break;
675     }
676 
677     /* Keep track of the state of all sources */
678     mask = BIT(f);
679     if (level) {
680         s->irq_state[0] |= mask;
681     } else {
682         s->irq_state[0] &= ~mask;
683     }
684     if (irq == 0 || irq == 0xff) {
685         return; /* disabled */
686     }
687     if (unlikely(irq > max_irq || irq == 2)) {
688         qemu_log_mask(LOG_GUEST_ERROR, "Invalid ISA IRQ routing %d for %d",
689                       irq, f);
690         return;
691     }
692     /* Record source state at mapped IRQ */
693     if (level) {
694         s->irq_state[irq] |= mask;
695     } else {
696         s->irq_state[irq] &= ~mask;
697     }
698     /* Make sure there are no stuck bits if mapping has changed */
699     s->irq_state[irq] &= s->irq_state[0];
700     /* ISA IRQ level is the OR of all sources routed to it */
701     qemu_set_irq(s->isa_irqs_in[irq], !!s->irq_state[irq]);
702 }
703 
704 static void via_isa_pirq(void *opaque, int pin, int level)
705 {
706     via_isa_set_irq(opaque, pin, level);
707 }
708 
709 static void via_isa_request_i8259_irq(void *opaque, int irq, int level)
710 {
711     ViaISAState *s = opaque;
712     qemu_set_irq(s->cpu_intr, level);
713 }
714 
715 static void via_isa_realize(PCIDevice *d, Error **errp)
716 {
717     ViaISAState *s = VIA_ISA(d);
718     DeviceState *dev = DEVICE(d);
719     PCIBus *pci_bus = pci_get_bus(d);
720     ISABus *isa_bus;
721     int i;
722 
723     qdev_init_gpio_out_named(dev, &s->cpu_intr, "intr", 1);
724     qdev_init_gpio_in_named(dev, via_isa_pirq, "pirq", PCI_NUM_PINS);
725     qemu_init_irq(&s->i8259_irq, via_isa_request_i8259_irq, s, 0);
726     isa_bus = isa_bus_new(dev, pci_address_space(d), pci_address_space_io(d),
727                           errp);
728 
729     if (!isa_bus) {
730         return;
731     }
732 
733     s->isa_irqs_in = i8259_init(isa_bus, &s->i8259_irq);
734     isa_bus_register_input_irqs(isa_bus, s->isa_irqs_in);
735     i8254_pit_init(isa_bus, 0x40, 0, NULL);
736     i8257_dma_init(OBJECT(d), isa_bus, 0);
737 
738     /* RTC */
739     qdev_prop_set_int32(DEVICE(&s->rtc), "base_year", 2000);
740     if (!qdev_realize(DEVICE(&s->rtc), BUS(isa_bus), errp)) {
741         return;
742     }
743     isa_connect_gpio_out(ISA_DEVICE(&s->rtc), 0, s->rtc.isairq);
744 
745     for (i = 0; i < PCI_CONFIG_HEADER_SIZE; i++) {
746         if (i < PCI_COMMAND || i >= PCI_REVISION_ID) {
747             d->wmask[i] = 0;
748         }
749     }
750 
751     /* Super I/O */
752     if (!qdev_realize(DEVICE(&s->via_sio), BUS(isa_bus), errp)) {
753         return;
754     }
755 
756     /* Function 1: IDE */
757     qdev_prop_set_int32(DEVICE(&s->ide), "addr", d->devfn + 1);
758     if (!qdev_realize(DEVICE(&s->ide), BUS(pci_bus), errp)) {
759         return;
760     }
761     for (i = 0; i < 2; i++) {
762         qdev_connect_gpio_out_named(DEVICE(&s->ide), "isa-irq", i,
763                                     s->isa_irqs_in[14 + i]);
764     }
765 
766     /* Functions 2-3: USB Ports */
767     for (i = 0; i < ARRAY_SIZE(s->uhci); i++) {
768         qdev_prop_set_int32(DEVICE(&s->uhci[i]), "addr", d->devfn + 2 + i);
769         if (!qdev_realize(DEVICE(&s->uhci[i]), BUS(pci_bus), errp)) {
770             return;
771         }
772     }
773 
774     /* Function 4: Power Management */
775     qdev_prop_set_int32(DEVICE(&s->pm), "addr", d->devfn + 4);
776     if (!qdev_realize(DEVICE(&s->pm), BUS(pci_bus), errp)) {
777         return;
778     }
779 
780     /* Function 5: AC97 Audio */
781     qdev_prop_set_int32(DEVICE(&s->ac97), "addr", d->devfn + 5);
782     if (!qdev_realize(DEVICE(&s->ac97), BUS(pci_bus), errp)) {
783         return;
784     }
785 
786     /* Function 6: MC97 Modem */
787     qdev_prop_set_int32(DEVICE(&s->mc97), "addr", d->devfn + 6);
788     if (!qdev_realize(DEVICE(&s->mc97), BUS(pci_bus), errp)) {
789         return;
790     }
791 }
792 
793 /* TYPE_VT82C686B_ISA */
794 
795 static void vt82c686b_write_config(PCIDevice *d, uint32_t addr,
796                                    uint32_t val, int len)
797 {
798     ViaISAState *s = VIA_ISA(d);
799 
800     trace_via_isa_write(addr, val, len);
801     pci_default_write_config(d, addr, val, len);
802     if (addr == 0x85) {
803         /* BIT(1): enable or disable superio config io ports */
804         via_superio_io_enable(&s->via_sio, val & BIT(1));
805     }
806 }
807 
808 static void vt82c686b_isa_reset(DeviceState *dev)
809 {
810     ViaISAState *s = VIA_ISA(dev);
811     uint8_t *pci_conf = s->dev.config;
812 
813     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
814     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
815                  PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
816     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
817 
818     pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
819     pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
820     pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
821     pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
822     pci_conf[0x59] = 0x04;
823     pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
824     pci_conf[0x5f] = 0x04;
825     pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
826 }
827 
828 static void vt82c686b_init(Object *obj)
829 {
830     ViaISAState *s = VIA_ISA(obj);
831 
832     object_initialize_child(obj, "sio", &s->via_sio, TYPE_VT82C686B_SUPERIO);
833     object_initialize_child(obj, "pm", &s->pm, TYPE_VT82C686B_PM);
834 }
835 
836 static void vt82c686b_class_init(ObjectClass *klass, void *data)
837 {
838     DeviceClass *dc = DEVICE_CLASS(klass);
839     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
840 
841     k->realize = via_isa_realize;
842     k->config_write = vt82c686b_write_config;
843     k->vendor_id = PCI_VENDOR_ID_VIA;
844     k->device_id = PCI_DEVICE_ID_VIA_82C686B_ISA;
845     k->class_id = PCI_CLASS_BRIDGE_ISA;
846     k->revision = 0x40;
847     device_class_set_legacy_reset(dc, vt82c686b_isa_reset);
848     dc->desc = "ISA bridge";
849     dc->vmsd = &vmstate_via;
850     /* Reason: part of VIA VT82C686 southbridge, needs to be wired up */
851     dc->user_creatable = false;
852 }
853 
854 static const TypeInfo vt82c686b_isa_info = {
855     .name          = TYPE_VT82C686B_ISA,
856     .parent        = TYPE_VIA_ISA,
857     .instance_size = sizeof(ViaISAState),
858     .instance_init = vt82c686b_init,
859     .class_init    = vt82c686b_class_init,
860 };
861 
862 /* TYPE_VT8231_ISA */
863 
864 static void vt8231_write_config(PCIDevice *d, uint32_t addr,
865                                 uint32_t val, int len)
866 {
867     ViaISAState *s = VIA_ISA(d);
868 
869     trace_via_isa_write(addr, val, len);
870     pci_default_write_config(d, addr, val, len);
871     if (addr == 0x50) {
872         /* BIT(2): enable or disable superio config io ports */
873         via_superio_io_enable(&s->via_sio, val & BIT(2));
874     }
875 }
876 
877 static void vt8231_isa_reset(DeviceState *dev)
878 {
879     ViaISAState *s = VIA_ISA(dev);
880     uint8_t *pci_conf = s->dev.config;
881 
882     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
883     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
884                  PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
885     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
886 
887     pci_conf[0x4c] = 0x04; /* IDE interrupt Routing */
888     pci_conf[0x58] = 0x40; /* Miscellaneous Control 0 */
889     pci_conf[0x67] = 0x08; /* Fast IR Config */
890     pci_conf[0x6b] = 0x01; /* Fast IR I/O Base */
891 }
892 
893 static void vt8231_init(Object *obj)
894 {
895     ViaISAState *s = VIA_ISA(obj);
896 
897     object_initialize_child(obj, "sio", &s->via_sio, TYPE_VT8231_SUPERIO);
898     object_initialize_child(obj, "pm", &s->pm, TYPE_VT8231_PM);
899 }
900 
901 static void vt8231_class_init(ObjectClass *klass, void *data)
902 {
903     DeviceClass *dc = DEVICE_CLASS(klass);
904     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
905 
906     k->realize = via_isa_realize;
907     k->config_write = vt8231_write_config;
908     k->vendor_id = PCI_VENDOR_ID_VIA;
909     k->device_id = PCI_DEVICE_ID_VIA_8231_ISA;
910     k->class_id = PCI_CLASS_BRIDGE_ISA;
911     k->revision = 0x10;
912     device_class_set_legacy_reset(dc, vt8231_isa_reset);
913     dc->desc = "ISA bridge";
914     dc->vmsd = &vmstate_via;
915     /* Reason: part of VIA VT8231 southbridge, needs to be wired up */
916     dc->user_creatable = false;
917 }
918 
919 static const TypeInfo vt8231_isa_info = {
920     .name          = TYPE_VT8231_ISA,
921     .parent        = TYPE_VIA_ISA,
922     .instance_size = sizeof(ViaISAState),
923     .instance_init = vt8231_init,
924     .class_init    = vt8231_class_init,
925 };
926 
927 
928 static void vt82c686b_register_types(void)
929 {
930     type_register_static(&via_pm_info);
931     type_register_static(&vt82c686b_pm_info);
932     type_register_static(&vt8231_pm_info);
933     type_register_static(&via_superio_info);
934     type_register_static(&vt82c686b_superio_info);
935     type_register_static(&vt8231_superio_info);
936     type_register_static(&via_isa_info);
937     type_register_static(&vt82c686b_isa_info);
938     type_register_static(&vt8231_isa_info);
939 }
940 
941 type_init(vt82c686b_register_types)
942