1 /* 2 * VT82C686B south bridge support 3 * 4 * Copyright (c) 2008 yajin (yajin@vm-kernel.org) 5 * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn) 6 * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com) 7 * This code is licensed under the GNU GPL v2. 8 * 9 * Contributions after 2012-01-13 are licensed under the terms of the 10 * GNU GPL, version 2 or (at your option) any later version. 11 */ 12 13 #include "hw/hw.h" 14 #include "hw/i386/pc.h" 15 #include "hw/isa/vt82c686.h" 16 #include "hw/i2c/i2c.h" 17 #include "hw/i2c/smbus.h" 18 #include "hw/pci/pci.h" 19 #include "hw/isa/isa.h" 20 #include "hw/sysbus.h" 21 #include "hw/mips/mips.h" 22 #include "hw/isa/apm.h" 23 #include "hw/acpi/acpi.h" 24 #include "hw/i2c/pm_smbus.h" 25 #include "sysemu/sysemu.h" 26 #include "qemu/timer.h" 27 #include "exec/address-spaces.h" 28 29 //#define DEBUG_VT82C686B 30 31 #ifdef DEBUG_VT82C686B 32 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__) 33 #else 34 #define DPRINTF(fmt, ...) 35 #endif 36 37 typedef struct SuperIOConfig 38 { 39 uint8_t config[0x100]; 40 uint8_t index; 41 uint8_t data; 42 } SuperIOConfig; 43 44 typedef struct VT82C686BState { 45 PCIDevice dev; 46 MemoryRegion superio; 47 SuperIOConfig superio_conf; 48 } VT82C686BState; 49 50 #define TYPE_VT82C686B_DEVICE "VT82C686B" 51 #define VT82C686B_DEVICE(obj) \ 52 OBJECT_CHECK(VT82C686BState, (obj), TYPE_VT82C686B_DEVICE) 53 54 static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data, 55 unsigned size) 56 { 57 SuperIOConfig *superio_conf = opaque; 58 59 DPRINTF("superio_ioport_writeb address 0x%x val 0x%x\n", addr, data); 60 if (addr == 0x3f0) { 61 superio_conf->index = data & 0xff; 62 } else { 63 bool can_write = true; 64 /* 0x3f1 */ 65 switch (superio_conf->index) { 66 case 0x00 ... 0xdf: 67 case 0xe4: 68 case 0xe5: 69 case 0xe9 ... 0xed: 70 case 0xf3: 71 case 0xf5: 72 case 0xf7: 73 case 0xf9 ... 0xfb: 74 case 0xfd ... 0xff: 75 can_write = false; 76 break; 77 case 0xe7: 78 if ((data & 0xff) != 0xfe) { 79 DPRINTF("change uart 1 base. unsupported yet\n"); 80 can_write = false; 81 } 82 break; 83 case 0xe8: 84 if ((data & 0xff) != 0xbe) { 85 DPRINTF("change uart 2 base. unsupported yet\n"); 86 can_write = false; 87 } 88 break; 89 default: 90 break; 91 92 } 93 if (can_write) { 94 superio_conf->config[superio_conf->index] = data & 0xff; 95 } 96 } 97 } 98 99 static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size) 100 { 101 SuperIOConfig *superio_conf = opaque; 102 103 DPRINTF("superio_ioport_readb address 0x%x\n", addr); 104 return (superio_conf->config[superio_conf->index]); 105 } 106 107 static const MemoryRegionOps superio_ops = { 108 .read = superio_ioport_readb, 109 .write = superio_ioport_writeb, 110 .endianness = DEVICE_NATIVE_ENDIAN, 111 .impl = { 112 .min_access_size = 1, 113 .max_access_size = 1, 114 }, 115 }; 116 117 static void vt82c686b_reset(void * opaque) 118 { 119 PCIDevice *d = opaque; 120 uint8_t *pci_conf = d->config; 121 VT82C686BState *vt82c = VT82C686B_DEVICE(d); 122 123 pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0); 124 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | 125 PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL); 126 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM); 127 128 pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */ 129 pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */ 130 pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */ 131 pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */ 132 pci_conf[0x59] = 0x04; 133 pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/ 134 pci_conf[0x5f] = 0x04; 135 pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */ 136 137 vt82c->superio_conf.config[0xe0] = 0x3c; 138 vt82c->superio_conf.config[0xe2] = 0x03; 139 vt82c->superio_conf.config[0xe3] = 0xfc; 140 vt82c->superio_conf.config[0xe6] = 0xde; 141 vt82c->superio_conf.config[0xe7] = 0xfe; 142 vt82c->superio_conf.config[0xe8] = 0xbe; 143 } 144 145 /* write config pci function0 registers. PCI-ISA bridge */ 146 static void vt82c686b_write_config(PCIDevice * d, uint32_t address, 147 uint32_t val, int len) 148 { 149 VT82C686BState *vt686 = VT82C686B_DEVICE(d); 150 151 DPRINTF("vt82c686b_write_config address 0x%x val 0x%x len 0x%x\n", 152 address, val, len); 153 154 pci_default_write_config(d, address, val, len); 155 if (address == 0x85) { /* enable or disable super IO configure */ 156 memory_region_set_enabled(&vt686->superio, val & 0x2); 157 } 158 } 159 160 #define ACPI_DBG_IO_ADDR 0xb044 161 162 typedef struct VT686PMState { 163 PCIDevice dev; 164 MemoryRegion io; 165 ACPIREGS ar; 166 APMState apm; 167 PMSMBus smb; 168 uint32_t smb_io_base; 169 } VT686PMState; 170 171 typedef struct VT686AC97State { 172 PCIDevice dev; 173 } VT686AC97State; 174 175 typedef struct VT686MC97State { 176 PCIDevice dev; 177 } VT686MC97State; 178 179 #define TYPE_VT82C686B_PM_DEVICE "VT82C686B_PM" 180 #define VT82C686B_PM_DEVICE(obj) \ 181 OBJECT_CHECK(VT686PMState, (obj), TYPE_VT82C686B_PM_DEVICE) 182 183 #define TYPE_VT82C686B_MC97_DEVICE "VT82C686B_MC97" 184 #define VT82C686B_MC97_DEVICE(obj) \ 185 OBJECT_CHECK(VT686MC97State, (obj), TYPE_VT82C686B_MC97_DEVICE) 186 187 #define TYPE_VT82C686B_AC97_DEVICE "VT82C686B_AC97" 188 #define VT82C686B_AC97_DEVICE(obj) \ 189 OBJECT_CHECK(VT686AC97State, (obj), TYPE_VT82C686B_AC97_DEVICE) 190 191 static void pm_update_sci(VT686PMState *s) 192 { 193 int sci_level, pmsts; 194 195 pmsts = acpi_pm1_evt_get_sts(&s->ar); 196 sci_level = (((pmsts & s->ar.pm1.evt.en) & 197 (ACPI_BITMASK_RT_CLOCK_ENABLE | 198 ACPI_BITMASK_POWER_BUTTON_ENABLE | 199 ACPI_BITMASK_GLOBAL_LOCK_ENABLE | 200 ACPI_BITMASK_TIMER_ENABLE)) != 0); 201 pci_set_irq(&s->dev, sci_level); 202 /* schedule a timer interruption if needed */ 203 acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) && 204 !(pmsts & ACPI_BITMASK_TIMER_STATUS)); 205 } 206 207 static void pm_tmr_timer(ACPIREGS *ar) 208 { 209 VT686PMState *s = container_of(ar, VT686PMState, ar); 210 pm_update_sci(s); 211 } 212 213 static void pm_io_space_update(VT686PMState *s) 214 { 215 uint32_t pm_io_base; 216 217 pm_io_base = pci_get_long(s->dev.config + 0x40); 218 pm_io_base &= 0xffc0; 219 220 memory_region_transaction_begin(); 221 memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1); 222 memory_region_set_address(&s->io, pm_io_base); 223 memory_region_transaction_commit(); 224 } 225 226 static void pm_write_config(PCIDevice *d, 227 uint32_t address, uint32_t val, int len) 228 { 229 DPRINTF("pm_write_config address 0x%x val 0x%x len 0x%x\n", 230 address, val, len); 231 pci_default_write_config(d, address, val, len); 232 } 233 234 static int vmstate_acpi_post_load(void *opaque, int version_id) 235 { 236 VT686PMState *s = opaque; 237 238 pm_io_space_update(s); 239 return 0; 240 } 241 242 static const VMStateDescription vmstate_acpi = { 243 .name = "vt82c686b_pm", 244 .version_id = 1, 245 .minimum_version_id = 1, 246 .post_load = vmstate_acpi_post_load, 247 .fields = (VMStateField[]) { 248 VMSTATE_PCI_DEVICE(dev, VT686PMState), 249 VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState), 250 VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState), 251 VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState), 252 VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState), 253 VMSTATE_TIMER_PTR(ar.tmr.timer, VT686PMState), 254 VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState), 255 VMSTATE_END_OF_LIST() 256 } 257 }; 258 259 /* 260 * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init() 261 * just register a PCI device now, functionalities will be implemented later. 262 */ 263 264 static void vt82c686b_ac97_realize(PCIDevice *dev, Error **errp) 265 { 266 VT686AC97State *s = VT82C686B_AC97_DEVICE(dev); 267 uint8_t *pci_conf = s->dev.config; 268 269 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE | 270 PCI_COMMAND_PARITY); 271 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST | 272 PCI_STATUS_DEVSEL_MEDIUM); 273 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03); 274 } 275 276 void vt82c686b_ac97_init(PCIBus *bus, int devfn) 277 { 278 PCIDevice *dev; 279 280 dev = pci_create(bus, devfn, TYPE_VT82C686B_AC97_DEVICE); 281 qdev_init_nofail(&dev->qdev); 282 } 283 284 static void via_ac97_class_init(ObjectClass *klass, void *data) 285 { 286 DeviceClass *dc = DEVICE_CLASS(klass); 287 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 288 289 k->realize = vt82c686b_ac97_realize; 290 k->vendor_id = PCI_VENDOR_ID_VIA; 291 k->device_id = PCI_DEVICE_ID_VIA_AC97; 292 k->revision = 0x50; 293 k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO; 294 set_bit(DEVICE_CATEGORY_SOUND, dc->categories); 295 dc->desc = "AC97"; 296 } 297 298 static const TypeInfo via_ac97_info = { 299 .name = TYPE_VT82C686B_AC97_DEVICE, 300 .parent = TYPE_PCI_DEVICE, 301 .instance_size = sizeof(VT686AC97State), 302 .class_init = via_ac97_class_init, 303 }; 304 305 static void vt82c686b_mc97_realize(PCIDevice *dev, Error **errp) 306 { 307 VT686MC97State *s = VT82C686B_MC97_DEVICE(dev); 308 uint8_t *pci_conf = s->dev.config; 309 310 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE | 311 PCI_COMMAND_VGA_PALETTE); 312 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM); 313 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03); 314 } 315 316 void vt82c686b_mc97_init(PCIBus *bus, int devfn) 317 { 318 PCIDevice *dev; 319 320 dev = pci_create(bus, devfn, TYPE_VT82C686B_MC97_DEVICE); 321 qdev_init_nofail(&dev->qdev); 322 } 323 324 static void via_mc97_class_init(ObjectClass *klass, void *data) 325 { 326 DeviceClass *dc = DEVICE_CLASS(klass); 327 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 328 329 k->realize = vt82c686b_mc97_realize; 330 k->vendor_id = PCI_VENDOR_ID_VIA; 331 k->device_id = PCI_DEVICE_ID_VIA_MC97; 332 k->class_id = PCI_CLASS_COMMUNICATION_OTHER; 333 k->revision = 0x30; 334 set_bit(DEVICE_CATEGORY_NETWORK, dc->categories); 335 dc->desc = "MC97"; 336 } 337 338 static const TypeInfo via_mc97_info = { 339 .name = TYPE_VT82C686B_MC97_DEVICE, 340 .parent = TYPE_PCI_DEVICE, 341 .instance_size = sizeof(VT686MC97State), 342 .class_init = via_mc97_class_init, 343 }; 344 345 /* vt82c686 pm init */ 346 static void vt82c686b_pm_realize(PCIDevice *dev, Error **errp) 347 { 348 VT686PMState *s = VT82C686B_PM_DEVICE(dev); 349 uint8_t *pci_conf; 350 351 pci_conf = s->dev.config; 352 pci_set_word(pci_conf + PCI_COMMAND, 0); 353 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK | 354 PCI_STATUS_DEVSEL_MEDIUM); 355 356 /* 0x48-0x4B is Power Management I/O Base */ 357 pci_set_long(pci_conf + 0x48, 0x00000001); 358 359 /* SMB ports:0xeee0~0xeeef */ 360 s->smb_io_base =((s->smb_io_base & 0xfff0) + 0x0); 361 pci_conf[0x90] = s->smb_io_base | 1; 362 pci_conf[0x91] = s->smb_io_base >> 8; 363 pci_conf[0xd2] = 0x90; 364 pm_smbus_init(&s->dev.qdev, &s->smb); 365 memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io); 366 367 apm_init(dev, &s->apm, NULL, s); 368 369 memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64); 370 memory_region_set_enabled(&s->io, false); 371 memory_region_add_subregion(get_system_io(), 0, &s->io); 372 373 acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io); 374 acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io); 375 acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2); 376 } 377 378 I2CBus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base, 379 qemu_irq sci_irq) 380 { 381 PCIDevice *dev; 382 VT686PMState *s; 383 384 dev = pci_create(bus, devfn, TYPE_VT82C686B_PM_DEVICE); 385 qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base); 386 387 s = VT82C686B_PM_DEVICE(dev); 388 389 qdev_init_nofail(&dev->qdev); 390 391 return s->smb.smbus; 392 } 393 394 static Property via_pm_properties[] = { 395 DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0), 396 DEFINE_PROP_END_OF_LIST(), 397 }; 398 399 static void via_pm_class_init(ObjectClass *klass, void *data) 400 { 401 DeviceClass *dc = DEVICE_CLASS(klass); 402 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 403 404 k->realize = vt82c686b_pm_realize; 405 k->config_write = pm_write_config; 406 k->vendor_id = PCI_VENDOR_ID_VIA; 407 k->device_id = PCI_DEVICE_ID_VIA_ACPI; 408 k->class_id = PCI_CLASS_BRIDGE_OTHER; 409 k->revision = 0x40; 410 dc->desc = "PM"; 411 dc->vmsd = &vmstate_acpi; 412 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 413 dc->props = via_pm_properties; 414 } 415 416 static const TypeInfo via_pm_info = { 417 .name = TYPE_VT82C686B_PM_DEVICE, 418 .parent = TYPE_PCI_DEVICE, 419 .instance_size = sizeof(VT686PMState), 420 .class_init = via_pm_class_init, 421 }; 422 423 static const VMStateDescription vmstate_via = { 424 .name = "vt82c686b", 425 .version_id = 1, 426 .minimum_version_id = 1, 427 .fields = (VMStateField[]) { 428 VMSTATE_PCI_DEVICE(dev, VT82C686BState), 429 VMSTATE_END_OF_LIST() 430 } 431 }; 432 433 /* init the PCI-to-ISA bridge */ 434 static void vt82c686b_realize(PCIDevice *d, Error **errp) 435 { 436 VT82C686BState *vt82c = VT82C686B_DEVICE(d); 437 uint8_t *pci_conf; 438 ISABus *isa_bus; 439 uint8_t *wmask; 440 int i; 441 442 isa_bus = isa_bus_new(DEVICE(d), get_system_memory(), 443 pci_address_space_io(d), errp); 444 if (!isa_bus) { 445 return; 446 } 447 448 pci_conf = d->config; 449 pci_config_set_prog_interface(pci_conf, 0x0); 450 451 wmask = d->wmask; 452 for (i = 0x00; i < 0xff; i++) { 453 if (i<=0x03 || (i>=0x08 && i<=0x3f)) { 454 wmask[i] = 0x00; 455 } 456 } 457 458 memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops, 459 &vt82c->superio_conf, "superio", 2); 460 memory_region_set_enabled(&vt82c->superio, false); 461 /* The floppy also uses 0x3f0 and 0x3f1. 462 * But we do not emulate a floppy, so just set it here. */ 463 memory_region_add_subregion(isa_bus->address_space_io, 0x3f0, 464 &vt82c->superio); 465 466 qemu_register_reset(vt82c686b_reset, d); 467 } 468 469 ISABus *vt82c686b_init(PCIBus *bus, int devfn) 470 { 471 PCIDevice *d; 472 473 d = pci_create_simple_multifunction(bus, devfn, true, 474 TYPE_VT82C686B_DEVICE); 475 476 return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0")); 477 } 478 479 static void via_class_init(ObjectClass *klass, void *data) 480 { 481 DeviceClass *dc = DEVICE_CLASS(klass); 482 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 483 484 k->realize = vt82c686b_realize; 485 k->config_write = vt82c686b_write_config; 486 k->vendor_id = PCI_VENDOR_ID_VIA; 487 k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE; 488 k->class_id = PCI_CLASS_BRIDGE_ISA; 489 k->revision = 0x40; 490 dc->desc = "ISA bridge"; 491 dc->vmsd = &vmstate_via; 492 /* 493 * Reason: part of VIA VT82C686 southbridge, needs to be wired up, 494 * e.g. by mips_fulong2e_init() 495 */ 496 dc->cannot_instantiate_with_device_add_yet = true; 497 } 498 499 static const TypeInfo via_info = { 500 .name = TYPE_VT82C686B_DEVICE, 501 .parent = TYPE_PCI_DEVICE, 502 .instance_size = sizeof(VT82C686BState), 503 .class_init = via_class_init, 504 }; 505 506 static void vt82c686b_register_types(void) 507 { 508 type_register_static(&via_ac97_info); 509 type_register_static(&via_mc97_info); 510 type_register_static(&via_pm_info); 511 type_register_static(&via_info); 512 } 513 514 type_init(vt82c686b_register_types) 515