1 /* 2 * VT82C686B south bridge support 3 * 4 * Copyright (c) 2008 yajin (yajin@vm-kernel.org) 5 * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn) 6 * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com) 7 * This code is licensed under the GNU GPL v2. 8 * 9 * Contributions after 2012-01-13 are licensed under the terms of the 10 * GNU GPL, version 2 or (at your option) any later version. 11 */ 12 13 #include "hw/hw.h" 14 #include "hw/i386/pc.h" 15 #include "hw/isa/vt82c686.h" 16 #include "hw/i2c/i2c.h" 17 #include "hw/i2c/smbus.h" 18 #include "hw/pci/pci.h" 19 #include "hw/isa/isa.h" 20 #include "hw/sysbus.h" 21 #include "hw/mips/mips.h" 22 #include "hw/isa/apm.h" 23 #include "hw/acpi/acpi.h" 24 #include "hw/i2c/pm_smbus.h" 25 #include "sysemu/sysemu.h" 26 #include "qemu/timer.h" 27 #include "exec/address-spaces.h" 28 29 //#define DEBUG_VT82C686B 30 31 #ifdef DEBUG_VT82C686B 32 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__) 33 #else 34 #define DPRINTF(fmt, ...) 35 #endif 36 37 typedef struct SuperIOConfig 38 { 39 uint8_t config[0xff]; 40 uint8_t index; 41 uint8_t data; 42 } SuperIOConfig; 43 44 typedef struct VT82C686BState { 45 PCIDevice dev; 46 MemoryRegion superio; 47 SuperIOConfig superio_conf; 48 } VT82C686BState; 49 50 static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data, 51 unsigned size) 52 { 53 int can_write; 54 SuperIOConfig *superio_conf = opaque; 55 56 DPRINTF("superio_ioport_writeb address 0x%x val 0x%x\n", addr, data); 57 if (addr == 0x3f0) { 58 superio_conf->index = data & 0xff; 59 } else { 60 /* 0x3f1 */ 61 switch (superio_conf->index) { 62 case 0x00 ... 0xdf: 63 case 0xe4: 64 case 0xe5: 65 case 0xe9 ... 0xed: 66 case 0xf3: 67 case 0xf5: 68 case 0xf7: 69 case 0xf9 ... 0xfb: 70 case 0xfd ... 0xff: 71 can_write = 0; 72 break; 73 default: 74 can_write = 1; 75 76 if (can_write) { 77 switch (superio_conf->index) { 78 case 0xe7: 79 if ((data & 0xff) != 0xfe) { 80 DPRINTF("chage uart 1 base. unsupported yet\n"); 81 } 82 break; 83 case 0xe8: 84 if ((data & 0xff) != 0xbe) { 85 DPRINTF("chage uart 2 base. unsupported yet\n"); 86 } 87 break; 88 89 default: 90 superio_conf->config[superio_conf->index] = data & 0xff; 91 } 92 } 93 } 94 superio_conf->config[superio_conf->index] = data & 0xff; 95 } 96 } 97 98 static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size) 99 { 100 SuperIOConfig *superio_conf = opaque; 101 102 DPRINTF("superio_ioport_readb address 0x%x\n", addr); 103 return (superio_conf->config[superio_conf->index]); 104 } 105 106 static const MemoryRegionOps superio_ops = { 107 .read = superio_ioport_readb, 108 .write = superio_ioport_writeb, 109 .endianness = DEVICE_NATIVE_ENDIAN, 110 .impl = { 111 .min_access_size = 1, 112 .max_access_size = 1, 113 }, 114 }; 115 116 static void vt82c686b_reset(void * opaque) 117 { 118 PCIDevice *d = opaque; 119 uint8_t *pci_conf = d->config; 120 VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d); 121 122 pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0); 123 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | 124 PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL); 125 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM); 126 127 pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */ 128 pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */ 129 pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */ 130 pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */ 131 pci_conf[0x59] = 0x04; 132 pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/ 133 pci_conf[0x5f] = 0x04; 134 pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */ 135 136 vt82c->superio_conf.config[0xe0] = 0x3c; 137 vt82c->superio_conf.config[0xe2] = 0x03; 138 vt82c->superio_conf.config[0xe3] = 0xfc; 139 vt82c->superio_conf.config[0xe6] = 0xde; 140 vt82c->superio_conf.config[0xe7] = 0xfe; 141 vt82c->superio_conf.config[0xe8] = 0xbe; 142 } 143 144 /* write config pci function0 registers. PCI-ISA bridge */ 145 static void vt82c686b_write_config(PCIDevice * d, uint32_t address, 146 uint32_t val, int len) 147 { 148 VT82C686BState *vt686 = DO_UPCAST(VT82C686BState, dev, d); 149 150 DPRINTF("vt82c686b_write_config address 0x%x val 0x%x len 0x%x\n", 151 address, val, len); 152 153 pci_default_write_config(d, address, val, len); 154 if (address == 0x85) { /* enable or disable super IO configure */ 155 memory_region_set_enabled(&vt686->superio, val & 0x2); 156 } 157 } 158 159 #define ACPI_DBG_IO_ADDR 0xb044 160 161 typedef struct VT686PMState { 162 PCIDevice dev; 163 MemoryRegion io; 164 ACPIREGS ar; 165 APMState apm; 166 PMSMBus smb; 167 uint32_t smb_io_base; 168 } VT686PMState; 169 170 typedef struct VT686AC97State { 171 PCIDevice dev; 172 } VT686AC97State; 173 174 typedef struct VT686MC97State { 175 PCIDevice dev; 176 } VT686MC97State; 177 178 static void pm_update_sci(VT686PMState *s) 179 { 180 int sci_level, pmsts; 181 182 pmsts = acpi_pm1_evt_get_sts(&s->ar); 183 sci_level = (((pmsts & s->ar.pm1.evt.en) & 184 (ACPI_BITMASK_RT_CLOCK_ENABLE | 185 ACPI_BITMASK_POWER_BUTTON_ENABLE | 186 ACPI_BITMASK_GLOBAL_LOCK_ENABLE | 187 ACPI_BITMASK_TIMER_ENABLE)) != 0); 188 pci_set_irq(&s->dev, sci_level); 189 /* schedule a timer interruption if needed */ 190 acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) && 191 !(pmsts & ACPI_BITMASK_TIMER_STATUS)); 192 } 193 194 static void pm_tmr_timer(ACPIREGS *ar) 195 { 196 VT686PMState *s = container_of(ar, VT686PMState, ar); 197 pm_update_sci(s); 198 } 199 200 static void pm_io_space_update(VT686PMState *s) 201 { 202 uint32_t pm_io_base; 203 204 pm_io_base = pci_get_long(s->dev.config + 0x40); 205 pm_io_base &= 0xffc0; 206 207 memory_region_transaction_begin(); 208 memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1); 209 memory_region_set_address(&s->io, pm_io_base); 210 memory_region_transaction_commit(); 211 } 212 213 static void pm_write_config(PCIDevice *d, 214 uint32_t address, uint32_t val, int len) 215 { 216 DPRINTF("pm_write_config address 0x%x val 0x%x len 0x%x\n", 217 address, val, len); 218 pci_default_write_config(d, address, val, len); 219 } 220 221 static int vmstate_acpi_post_load(void *opaque, int version_id) 222 { 223 VT686PMState *s = opaque; 224 225 pm_io_space_update(s); 226 return 0; 227 } 228 229 static const VMStateDescription vmstate_acpi = { 230 .name = "vt82c686b_pm", 231 .version_id = 1, 232 .minimum_version_id = 1, 233 .minimum_version_id_old = 1, 234 .post_load = vmstate_acpi_post_load, 235 .fields = (VMStateField []) { 236 VMSTATE_PCI_DEVICE(dev, VT686PMState), 237 VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState), 238 VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState), 239 VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState), 240 VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState), 241 VMSTATE_TIMER(ar.tmr.timer, VT686PMState), 242 VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState), 243 VMSTATE_END_OF_LIST() 244 } 245 }; 246 247 /* 248 * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init() 249 * just register a PCI device now, functionalities will be implemented later. 250 */ 251 252 static int vt82c686b_ac97_initfn(PCIDevice *dev) 253 { 254 VT686AC97State *s = DO_UPCAST(VT686AC97State, dev, dev); 255 uint8_t *pci_conf = s->dev.config; 256 257 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE | 258 PCI_COMMAND_PARITY); 259 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST | 260 PCI_STATUS_DEVSEL_MEDIUM); 261 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03); 262 263 return 0; 264 } 265 266 void vt82c686b_ac97_init(PCIBus *bus, int devfn) 267 { 268 PCIDevice *dev; 269 270 dev = pci_create(bus, devfn, "VT82C686B_AC97"); 271 qdev_init_nofail(&dev->qdev); 272 } 273 274 static void via_ac97_class_init(ObjectClass *klass, void *data) 275 { 276 DeviceClass *dc = DEVICE_CLASS(klass); 277 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 278 279 k->init = vt82c686b_ac97_initfn; 280 k->vendor_id = PCI_VENDOR_ID_VIA; 281 k->device_id = PCI_DEVICE_ID_VIA_AC97; 282 k->revision = 0x50; 283 k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO; 284 set_bit(DEVICE_CATEGORY_SOUND, dc->categories); 285 dc->desc = "AC97"; 286 } 287 288 static const TypeInfo via_ac97_info = { 289 .name = "VT82C686B_AC97", 290 .parent = TYPE_PCI_DEVICE, 291 .instance_size = sizeof(VT686AC97State), 292 .class_init = via_ac97_class_init, 293 }; 294 295 static int vt82c686b_mc97_initfn(PCIDevice *dev) 296 { 297 VT686MC97State *s = DO_UPCAST(VT686MC97State, dev, dev); 298 uint8_t *pci_conf = s->dev.config; 299 300 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE | 301 PCI_COMMAND_VGA_PALETTE); 302 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM); 303 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03); 304 305 return 0; 306 } 307 308 void vt82c686b_mc97_init(PCIBus *bus, int devfn) 309 { 310 PCIDevice *dev; 311 312 dev = pci_create(bus, devfn, "VT82C686B_MC97"); 313 qdev_init_nofail(&dev->qdev); 314 } 315 316 static void via_mc97_class_init(ObjectClass *klass, void *data) 317 { 318 DeviceClass *dc = DEVICE_CLASS(klass); 319 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 320 321 k->init = vt82c686b_mc97_initfn; 322 k->vendor_id = PCI_VENDOR_ID_VIA; 323 k->device_id = PCI_DEVICE_ID_VIA_MC97; 324 k->class_id = PCI_CLASS_COMMUNICATION_OTHER; 325 k->revision = 0x30; 326 set_bit(DEVICE_CATEGORY_NETWORK, dc->categories); 327 dc->desc = "MC97"; 328 } 329 330 static const TypeInfo via_mc97_info = { 331 .name = "VT82C686B_MC97", 332 .parent = TYPE_PCI_DEVICE, 333 .instance_size = sizeof(VT686MC97State), 334 .class_init = via_mc97_class_init, 335 }; 336 337 /* vt82c686 pm init */ 338 static int vt82c686b_pm_initfn(PCIDevice *dev) 339 { 340 VT686PMState *s = DO_UPCAST(VT686PMState, dev, dev); 341 uint8_t *pci_conf; 342 343 pci_conf = s->dev.config; 344 pci_set_word(pci_conf + PCI_COMMAND, 0); 345 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK | 346 PCI_STATUS_DEVSEL_MEDIUM); 347 348 /* 0x48-0x4B is Power Management I/O Base */ 349 pci_set_long(pci_conf + 0x48, 0x00000001); 350 351 /* SMB ports:0xeee0~0xeeef */ 352 s->smb_io_base =((s->smb_io_base & 0xfff0) + 0x0); 353 pci_conf[0x90] = s->smb_io_base | 1; 354 pci_conf[0x91] = s->smb_io_base >> 8; 355 pci_conf[0xd2] = 0x90; 356 pm_smbus_init(&s->dev.qdev, &s->smb); 357 memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io); 358 359 apm_init(dev, &s->apm, NULL, s); 360 361 memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64); 362 memory_region_set_enabled(&s->io, false); 363 memory_region_add_subregion(get_system_io(), 0, &s->io); 364 365 acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io); 366 acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io); 367 acpi_pm1_cnt_init(&s->ar, &s->io, 2); 368 369 return 0; 370 } 371 372 i2c_bus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base, 373 qemu_irq sci_irq) 374 { 375 PCIDevice *dev; 376 VT686PMState *s; 377 378 dev = pci_create(bus, devfn, "VT82C686B_PM"); 379 qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base); 380 381 s = DO_UPCAST(VT686PMState, dev, dev); 382 383 qdev_init_nofail(&dev->qdev); 384 385 return s->smb.smbus; 386 } 387 388 static Property via_pm_properties[] = { 389 DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0), 390 DEFINE_PROP_END_OF_LIST(), 391 }; 392 393 static void via_pm_class_init(ObjectClass *klass, void *data) 394 { 395 DeviceClass *dc = DEVICE_CLASS(klass); 396 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 397 398 k->init = vt82c686b_pm_initfn; 399 k->config_write = pm_write_config; 400 k->vendor_id = PCI_VENDOR_ID_VIA; 401 k->device_id = PCI_DEVICE_ID_VIA_ACPI; 402 k->class_id = PCI_CLASS_BRIDGE_OTHER; 403 k->revision = 0x40; 404 dc->desc = "PM"; 405 dc->vmsd = &vmstate_acpi; 406 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 407 dc->props = via_pm_properties; 408 } 409 410 static const TypeInfo via_pm_info = { 411 .name = "VT82C686B_PM", 412 .parent = TYPE_PCI_DEVICE, 413 .instance_size = sizeof(VT686PMState), 414 .class_init = via_pm_class_init, 415 }; 416 417 static const VMStateDescription vmstate_via = { 418 .name = "vt82c686b", 419 .version_id = 1, 420 .minimum_version_id = 1, 421 .minimum_version_id_old = 1, 422 .fields = (VMStateField []) { 423 VMSTATE_PCI_DEVICE(dev, VT82C686BState), 424 VMSTATE_END_OF_LIST() 425 } 426 }; 427 428 /* init the PCI-to-ISA bridge */ 429 static int vt82c686b_initfn(PCIDevice *d) 430 { 431 VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d); 432 uint8_t *pci_conf; 433 ISABus *isa_bus; 434 uint8_t *wmask; 435 int i; 436 437 isa_bus = isa_bus_new(&d->qdev, pci_address_space_io(d)); 438 439 pci_conf = d->config; 440 pci_config_set_prog_interface(pci_conf, 0x0); 441 442 wmask = d->wmask; 443 for (i = 0x00; i < 0xff; i++) { 444 if (i<=0x03 || (i>=0x08 && i<=0x3f)) { 445 wmask[i] = 0x00; 446 } 447 } 448 449 memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops, 450 &vt82c->superio_conf, "superio", 2); 451 memory_region_set_enabled(&vt82c->superio, false); 452 /* The floppy also uses 0x3f0 and 0x3f1. 453 * But we do not emulate a floppy, so just set it here. */ 454 memory_region_add_subregion(isa_bus->address_space_io, 0x3f0, 455 &vt82c->superio); 456 457 qemu_register_reset(vt82c686b_reset, d); 458 459 return 0; 460 } 461 462 ISABus *vt82c686b_init(PCIBus *bus, int devfn) 463 { 464 PCIDevice *d; 465 466 d = pci_create_simple_multifunction(bus, devfn, true, "VT82C686B"); 467 468 return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0")); 469 } 470 471 static void via_class_init(ObjectClass *klass, void *data) 472 { 473 DeviceClass *dc = DEVICE_CLASS(klass); 474 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 475 476 k->init = vt82c686b_initfn; 477 k->config_write = vt82c686b_write_config; 478 k->vendor_id = PCI_VENDOR_ID_VIA; 479 k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE; 480 k->class_id = PCI_CLASS_BRIDGE_ISA; 481 k->revision = 0x40; 482 dc->desc = "ISA bridge"; 483 dc->vmsd = &vmstate_via; 484 /* 485 * Reason: part of VIA VT82C686 southbridge, needs to be wired up, 486 * e.g. by mips_fulong2e_init() 487 */ 488 dc->cannot_instantiate_with_device_add_yet = true; 489 } 490 491 static const TypeInfo via_info = { 492 .name = "VT82C686B", 493 .parent = TYPE_PCI_DEVICE, 494 .instance_size = sizeof(VT82C686BState), 495 .class_init = via_class_init, 496 }; 497 498 static void vt82c686b_register_types(void) 499 { 500 type_register_static(&via_ac97_info); 501 type_register_static(&via_mc97_info); 502 type_register_static(&via_pm_info); 503 type_register_static(&via_info); 504 } 505 506 type_init(vt82c686b_register_types) 507