xref: /openbmc/qemu/hw/isa/vt82c686.c (revision 06d4c71f)
1 /*
2  * VT82C686B south bridge support
3  *
4  * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
5  * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
6  * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
7  * This code is licensed under the GNU GPL v2.
8  *
9  * Contributions after 2012-01-13 are licensed under the terms of the
10  * GNU GPL, version 2 or (at your option) any later version.
11  */
12 
13 #include "qemu/osdep.h"
14 #include "hw/isa/vt82c686.h"
15 #include "hw/i2c/i2c.h"
16 #include "hw/pci/pci.h"
17 #include "hw/qdev-properties.h"
18 #include "hw/isa/isa.h"
19 #include "hw/isa/superio.h"
20 #include "hw/sysbus.h"
21 #include "migration/vmstate.h"
22 #include "hw/mips/mips.h"
23 #include "hw/isa/apm.h"
24 #include "hw/acpi/acpi.h"
25 #include "hw/i2c/pm_smbus.h"
26 #include "qemu/module.h"
27 #include "qemu/timer.h"
28 #include "exec/address-spaces.h"
29 
30 /* #define DEBUG_VT82C686B */
31 
32 #ifdef DEBUG_VT82C686B
33 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __func__, ##__VA_ARGS__)
34 #else
35 #define DPRINTF(fmt, ...)
36 #endif
37 
38 typedef struct SuperIOConfig {
39     uint8_t config[0x100];
40     uint8_t index;
41     uint8_t data;
42 } SuperIOConfig;
43 
44 typedef struct VT82C686BState {
45     PCIDevice dev;
46     MemoryRegion superio;
47     SuperIOConfig superio_conf;
48 } VT82C686BState;
49 
50 #define TYPE_VT82C686B_DEVICE "VT82C686B"
51 #define VT82C686B_DEVICE(obj) \
52     OBJECT_CHECK(VT82C686BState, (obj), TYPE_VT82C686B_DEVICE)
53 
54 static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data,
55                                   unsigned size)
56 {
57     SuperIOConfig *superio_conf = opaque;
58 
59     DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x\n", addr, data);
60     if (addr == 0x3f0) {
61         superio_conf->index = data & 0xff;
62     } else {
63         bool can_write = true;
64         /* 0x3f1 */
65         switch (superio_conf->index) {
66         case 0x00 ... 0xdf:
67         case 0xe4:
68         case 0xe5:
69         case 0xe9 ... 0xed:
70         case 0xf3:
71         case 0xf5:
72         case 0xf7:
73         case 0xf9 ... 0xfb:
74         case 0xfd ... 0xff:
75             can_write = false;
76             break;
77         case 0xe7:
78             if ((data & 0xff) != 0xfe) {
79                 DPRINTF("change uart 1 base. unsupported yet\n");
80                 can_write = false;
81             }
82             break;
83         case 0xe8:
84             if ((data & 0xff) != 0xbe) {
85                 DPRINTF("change uart 2 base. unsupported yet\n");
86                 can_write = false;
87             }
88             break;
89         default:
90             break;
91 
92         }
93         if (can_write) {
94             superio_conf->config[superio_conf->index] = data & 0xff;
95         }
96     }
97 }
98 
99 static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size)
100 {
101     SuperIOConfig *superio_conf = opaque;
102 
103     DPRINTF("superio_ioport_readb  address 0x%x\n", addr);
104     return superio_conf->config[superio_conf->index];
105 }
106 
107 static const MemoryRegionOps superio_ops = {
108     .read = superio_ioport_readb,
109     .write = superio_ioport_writeb,
110     .endianness = DEVICE_NATIVE_ENDIAN,
111     .impl = {
112         .min_access_size = 1,
113         .max_access_size = 1,
114     },
115 };
116 
117 static void vt82c686b_isa_reset(DeviceState *dev)
118 {
119     VT82C686BState *vt82c = VT82C686B_DEVICE(dev);
120     uint8_t *pci_conf = vt82c->dev.config;
121 
122     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
123     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
124                  PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
125     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
126 
127     pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
128     pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
129     pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
130     pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
131     pci_conf[0x59] = 0x04;
132     pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
133     pci_conf[0x5f] = 0x04;
134     pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
135 
136     vt82c->superio_conf.config[0xe0] = 0x3c;
137     vt82c->superio_conf.config[0xe2] = 0x03;
138     vt82c->superio_conf.config[0xe3] = 0xfc;
139     vt82c->superio_conf.config[0xe6] = 0xde;
140     vt82c->superio_conf.config[0xe7] = 0xfe;
141     vt82c->superio_conf.config[0xe8] = 0xbe;
142 }
143 
144 /* write config pci function0 registers. PCI-ISA bridge */
145 static void vt82c686b_write_config(PCIDevice *d, uint32_t address,
146                                    uint32_t val, int len)
147 {
148     VT82C686BState *vt686 = VT82C686B_DEVICE(d);
149 
150     DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x\n",
151            address, val, len);
152 
153     pci_default_write_config(d, address, val, len);
154     if (address == 0x85) {  /* enable or disable super IO configure */
155         memory_region_set_enabled(&vt686->superio, val & 0x2);
156     }
157 }
158 
159 #define ACPI_DBG_IO_ADDR  0xb044
160 
161 typedef struct VT686PMState {
162     PCIDevice dev;
163     MemoryRegion io;
164     ACPIREGS ar;
165     APMState apm;
166     PMSMBus smb;
167     uint32_t smb_io_base;
168 } VT686PMState;
169 
170 typedef struct VT686AC97State {
171     PCIDevice dev;
172 } VT686AC97State;
173 
174 typedef struct VT686MC97State {
175     PCIDevice dev;
176 } VT686MC97State;
177 
178 #define TYPE_VT82C686B_PM_DEVICE "VT82C686B_PM"
179 #define VT82C686B_PM_DEVICE(obj) \
180     OBJECT_CHECK(VT686PMState, (obj), TYPE_VT82C686B_PM_DEVICE)
181 
182 #define TYPE_VT82C686B_MC97_DEVICE "VT82C686B_MC97"
183 #define VT82C686B_MC97_DEVICE(obj) \
184     OBJECT_CHECK(VT686MC97State, (obj), TYPE_VT82C686B_MC97_DEVICE)
185 
186 #define TYPE_VT82C686B_AC97_DEVICE "VT82C686B_AC97"
187 #define VT82C686B_AC97_DEVICE(obj) \
188     OBJECT_CHECK(VT686AC97State, (obj), TYPE_VT82C686B_AC97_DEVICE)
189 
190 static void pm_update_sci(VT686PMState *s)
191 {
192     int sci_level, pmsts;
193 
194     pmsts = acpi_pm1_evt_get_sts(&s->ar);
195     sci_level = (((pmsts & s->ar.pm1.evt.en) &
196                   (ACPI_BITMASK_RT_CLOCK_ENABLE |
197                    ACPI_BITMASK_POWER_BUTTON_ENABLE |
198                    ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
199                    ACPI_BITMASK_TIMER_ENABLE)) != 0);
200     pci_set_irq(&s->dev, sci_level);
201     /* schedule a timer interruption if needed */
202     acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
203                        !(pmsts & ACPI_BITMASK_TIMER_STATUS));
204 }
205 
206 static void pm_tmr_timer(ACPIREGS *ar)
207 {
208     VT686PMState *s = container_of(ar, VT686PMState, ar);
209     pm_update_sci(s);
210 }
211 
212 static void pm_io_space_update(VT686PMState *s)
213 {
214     uint32_t pm_io_base;
215 
216     pm_io_base = pci_get_long(s->dev.config + 0x40);
217     pm_io_base &= 0xffc0;
218 
219     memory_region_transaction_begin();
220     memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1);
221     memory_region_set_address(&s->io, pm_io_base);
222     memory_region_transaction_commit();
223 }
224 
225 static void pm_write_config(PCIDevice *d,
226                             uint32_t address, uint32_t val, int len)
227 {
228     DPRINTF("pm_write_config  address 0x%x  val 0x%x len 0x%x\n",
229            address, val, len);
230     pci_default_write_config(d, address, val, len);
231 }
232 
233 static int vmstate_acpi_post_load(void *opaque, int version_id)
234 {
235     VT686PMState *s = opaque;
236 
237     pm_io_space_update(s);
238     return 0;
239 }
240 
241 static const VMStateDescription vmstate_acpi = {
242     .name = "vt82c686b_pm",
243     .version_id = 1,
244     .minimum_version_id = 1,
245     .post_load = vmstate_acpi_post_load,
246     .fields = (VMStateField[]) {
247         VMSTATE_PCI_DEVICE(dev, VT686PMState),
248         VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState),
249         VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState),
250         VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState),
251         VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
252         VMSTATE_TIMER_PTR(ar.tmr.timer, VT686PMState),
253         VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState),
254         VMSTATE_END_OF_LIST()
255     }
256 };
257 
258 /*
259  * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
260  * just register a PCI device now, functionalities will be implemented later.
261  */
262 
263 static void vt82c686b_ac97_realize(PCIDevice *dev, Error **errp)
264 {
265     VT686AC97State *s = VT82C686B_AC97_DEVICE(dev);
266     uint8_t *pci_conf = s->dev.config;
267 
268     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
269                  PCI_COMMAND_PARITY);
270     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |
271                  PCI_STATUS_DEVSEL_MEDIUM);
272     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
273 }
274 
275 void vt82c686b_ac97_init(PCIBus *bus, int devfn)
276 {
277     PCIDevice *dev;
278 
279     dev = pci_create(bus, devfn, TYPE_VT82C686B_AC97_DEVICE);
280     qdev_init_nofail(&dev->qdev);
281 }
282 
283 static void via_ac97_class_init(ObjectClass *klass, void *data)
284 {
285     DeviceClass *dc = DEVICE_CLASS(klass);
286     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
287 
288     k->realize = vt82c686b_ac97_realize;
289     k->vendor_id = PCI_VENDOR_ID_VIA;
290     k->device_id = PCI_DEVICE_ID_VIA_AC97;
291     k->revision = 0x50;
292     k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;
293     set_bit(DEVICE_CATEGORY_SOUND, dc->categories);
294     dc->desc = "AC97";
295 }
296 
297 static const TypeInfo via_ac97_info = {
298     .name          = TYPE_VT82C686B_AC97_DEVICE,
299     .parent        = TYPE_PCI_DEVICE,
300     .instance_size = sizeof(VT686AC97State),
301     .class_init    = via_ac97_class_init,
302     .interfaces = (InterfaceInfo[]) {
303         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
304         { },
305     },
306 };
307 
308 static void vt82c686b_mc97_realize(PCIDevice *dev, Error **errp)
309 {
310     VT686MC97State *s = VT82C686B_MC97_DEVICE(dev);
311     uint8_t *pci_conf = s->dev.config;
312 
313     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
314                  PCI_COMMAND_VGA_PALETTE);
315     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
316     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
317 }
318 
319 void vt82c686b_mc97_init(PCIBus *bus, int devfn)
320 {
321     PCIDevice *dev;
322 
323     dev = pci_create(bus, devfn, TYPE_VT82C686B_MC97_DEVICE);
324     qdev_init_nofail(&dev->qdev);
325 }
326 
327 static void via_mc97_class_init(ObjectClass *klass, void *data)
328 {
329     DeviceClass *dc = DEVICE_CLASS(klass);
330     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
331 
332     k->realize = vt82c686b_mc97_realize;
333     k->vendor_id = PCI_VENDOR_ID_VIA;
334     k->device_id = PCI_DEVICE_ID_VIA_MC97;
335     k->class_id = PCI_CLASS_COMMUNICATION_OTHER;
336     k->revision = 0x30;
337     set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
338     dc->desc = "MC97";
339 }
340 
341 static const TypeInfo via_mc97_info = {
342     .name          = TYPE_VT82C686B_MC97_DEVICE,
343     .parent        = TYPE_PCI_DEVICE,
344     .instance_size = sizeof(VT686MC97State),
345     .class_init    = via_mc97_class_init,
346     .interfaces = (InterfaceInfo[]) {
347         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
348         { },
349     },
350 };
351 
352 /* vt82c686 pm init */
353 static void vt82c686b_pm_realize(PCIDevice *dev, Error **errp)
354 {
355     VT686PMState *s = VT82C686B_PM_DEVICE(dev);
356     uint8_t *pci_conf;
357 
358     pci_conf = s->dev.config;
359     pci_set_word(pci_conf + PCI_COMMAND, 0);
360     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
361                  PCI_STATUS_DEVSEL_MEDIUM);
362 
363     /* 0x48-0x4B is Power Management I/O Base */
364     pci_set_long(pci_conf + 0x48, 0x00000001);
365 
366     /* SMB ports:0xeee0~0xeeef */
367     s->smb_io_base = ((s->smb_io_base & 0xfff0) + 0x0);
368     pci_conf[0x90] = s->smb_io_base | 1;
369     pci_conf[0x91] = s->smb_io_base >> 8;
370     pci_conf[0xd2] = 0x90;
371     pm_smbus_init(DEVICE(s), &s->smb, false);
372     memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io);
373 
374     apm_init(dev, &s->apm, NULL, s);
375 
376     memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64);
377     memory_region_set_enabled(&s->io, false);
378     memory_region_add_subregion(get_system_io(), 0, &s->io);
379 
380     acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
381     acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
382     acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2);
383 }
384 
385 I2CBus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
386                           qemu_irq sci_irq)
387 {
388     PCIDevice *dev;
389     VT686PMState *s;
390 
391     dev = pci_create(bus, devfn, TYPE_VT82C686B_PM_DEVICE);
392     qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
393 
394     s = VT82C686B_PM_DEVICE(dev);
395 
396     qdev_init_nofail(&dev->qdev);
397 
398     return s->smb.smbus;
399 }
400 
401 static Property via_pm_properties[] = {
402     DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
403     DEFINE_PROP_END_OF_LIST(),
404 };
405 
406 static void via_pm_class_init(ObjectClass *klass, void *data)
407 {
408     DeviceClass *dc = DEVICE_CLASS(klass);
409     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
410 
411     k->realize = vt82c686b_pm_realize;
412     k->config_write = pm_write_config;
413     k->vendor_id = PCI_VENDOR_ID_VIA;
414     k->device_id = PCI_DEVICE_ID_VIA_ACPI;
415     k->class_id = PCI_CLASS_BRIDGE_OTHER;
416     k->revision = 0x40;
417     dc->desc = "PM";
418     dc->vmsd = &vmstate_acpi;
419     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
420     device_class_set_props(dc, via_pm_properties);
421 }
422 
423 static const TypeInfo via_pm_info = {
424     .name          = TYPE_VT82C686B_PM_DEVICE,
425     .parent        = TYPE_PCI_DEVICE,
426     .instance_size = sizeof(VT686PMState),
427     .class_init    = via_pm_class_init,
428     .interfaces = (InterfaceInfo[]) {
429         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
430         { },
431     },
432 };
433 
434 static const VMStateDescription vmstate_via = {
435     .name = "vt82c686b",
436     .version_id = 1,
437     .minimum_version_id = 1,
438     .fields = (VMStateField[]) {
439         VMSTATE_PCI_DEVICE(dev, VT82C686BState),
440         VMSTATE_END_OF_LIST()
441     }
442 };
443 
444 /* init the PCI-to-ISA bridge */
445 static void vt82c686b_realize(PCIDevice *d, Error **errp)
446 {
447     VT82C686BState *vt82c = VT82C686B_DEVICE(d);
448     uint8_t *pci_conf;
449     ISABus *isa_bus;
450     uint8_t *wmask;
451     int i;
452 
453     isa_bus = isa_bus_new(DEVICE(d), get_system_memory(),
454                           pci_address_space_io(d), errp);
455     if (!isa_bus) {
456         return;
457     }
458 
459     pci_conf = d->config;
460     pci_config_set_prog_interface(pci_conf, 0x0);
461 
462     wmask = d->wmask;
463     for (i = 0x00; i < 0xff; i++) {
464         if (i <= 0x03 || (i >= 0x08 && i <= 0x3f)) {
465             wmask[i] = 0x00;
466         }
467     }
468 
469     memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops,
470                           &vt82c->superio_conf, "superio", 2);
471     memory_region_set_enabled(&vt82c->superio, false);
472     /*
473      * The floppy also uses 0x3f0 and 0x3f1.
474      * But we do not emulate a floppy, so just set it here.
475      */
476     memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
477                                 &vt82c->superio);
478 }
479 
480 ISABus *vt82c686b_isa_init(PCIBus *bus, int devfn)
481 {
482     PCIDevice *d;
483 
484     d = pci_create_simple_multifunction(bus, devfn, true,
485                                         TYPE_VT82C686B_DEVICE);
486 
487     return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0"));
488 }
489 
490 static void via_class_init(ObjectClass *klass, void *data)
491 {
492     DeviceClass *dc = DEVICE_CLASS(klass);
493     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
494 
495     k->realize = vt82c686b_realize;
496     k->config_write = vt82c686b_write_config;
497     k->vendor_id = PCI_VENDOR_ID_VIA;
498     k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
499     k->class_id = PCI_CLASS_BRIDGE_ISA;
500     k->revision = 0x40;
501     dc->reset = vt82c686b_isa_reset;
502     dc->desc = "ISA bridge";
503     dc->vmsd = &vmstate_via;
504     /*
505      * Reason: part of VIA VT82C686 southbridge, needs to be wired up,
506      * e.g. by mips_fuloong2e_init()
507      */
508     dc->user_creatable = false;
509 }
510 
511 static const TypeInfo via_info = {
512     .name          = TYPE_VT82C686B_DEVICE,
513     .parent        = TYPE_PCI_DEVICE,
514     .instance_size = sizeof(VT82C686BState),
515     .class_init    = via_class_init,
516     .interfaces = (InterfaceInfo[]) {
517         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
518         { },
519     },
520 };
521 
522 static void vt82c686b_superio_class_init(ObjectClass *klass, void *data)
523 {
524     ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass);
525 
526     sc->serial.count = 2;
527     sc->parallel.count = 1;
528     sc->ide.count = 0;
529     sc->floppy.count = 1;
530 }
531 
532 static const TypeInfo via_superio_info = {
533     .name          = TYPE_VT82C686B_SUPERIO,
534     .parent        = TYPE_ISA_SUPERIO,
535     .instance_size = sizeof(ISASuperIODevice),
536     .class_size    = sizeof(ISASuperIOClass),
537     .class_init    = vt82c686b_superio_class_init,
538 };
539 
540 static void vt82c686b_register_types(void)
541 {
542     type_register_static(&via_ac97_info);
543     type_register_static(&via_mc97_info);
544     type_register_static(&via_pm_info);
545     type_register_static(&via_superio_info);
546     type_register_static(&via_info);
547 }
548 
549 type_init(vt82c686b_register_types)
550