xref: /openbmc/qemu/hw/intc/sifive_plic.c (revision ad40be27)
1 /*
2  * SiFive PLIC (Platform Level Interrupt Controller)
3  *
4  * Copyright (c) 2017 SiFive, Inc.
5  *
6  * This provides a parameterizable interrupt controller based on SiFive's PLIC.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms and conditions of the GNU General Public License,
10  * version 2 or later, as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope it will be useful, but WITHOUT
13  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
15  * more details.
16  *
17  * You should have received a copy of the GNU General Public License along with
18  * this program.  If not, see <http://www.gnu.org/licenses/>.
19  */
20 
21 #include "qemu/osdep.h"
22 #include "qapi/error.h"
23 #include "qemu/log.h"
24 #include "qemu/module.h"
25 #include "qemu/error-report.h"
26 #include "hw/sysbus.h"
27 #include "hw/pci/msi.h"
28 #include "hw/qdev-properties.h"
29 #include "hw/intc/sifive_plic.h"
30 #include "target/riscv/cpu.h"
31 #include "migration/vmstate.h"
32 #include "hw/irq.h"
33 #include "sysemu/kvm.h"
34 
35 static bool addr_between(uint32_t addr, uint32_t base, uint32_t num)
36 {
37     return addr >= base && addr - base < num;
38 }
39 
40 static PLICMode char_to_mode(char c)
41 {
42     switch (c) {
43     case 'U': return PLICMode_U;
44     case 'S': return PLICMode_S;
45     case 'H': return PLICMode_H;
46     case 'M': return PLICMode_M;
47     default:
48         error_report("plic: invalid mode '%c'", c);
49         exit(1);
50     }
51 }
52 
53 static uint32_t atomic_set_masked(uint32_t *a, uint32_t mask, uint32_t value)
54 {
55     uint32_t old, new, cmp = qatomic_read(a);
56 
57     do {
58         old = cmp;
59         new = (old & ~mask) | (value & mask);
60         cmp = qatomic_cmpxchg(a, old, new);
61     } while (old != cmp);
62 
63     return old;
64 }
65 
66 static void sifive_plic_set_pending(SiFivePLICState *plic, int irq, bool level)
67 {
68     atomic_set_masked(&plic->pending[irq >> 5], 1 << (irq & 31), -!!level);
69 }
70 
71 static void sifive_plic_set_claimed(SiFivePLICState *plic, int irq, bool level)
72 {
73     atomic_set_masked(&plic->claimed[irq >> 5], 1 << (irq & 31), -!!level);
74 }
75 
76 static uint32_t sifive_plic_claimed(SiFivePLICState *plic, uint32_t addrid)
77 {
78     uint32_t max_irq = 0;
79     uint32_t max_prio = plic->target_priority[addrid];
80     int i, j;
81 
82     for (i = 0; i < plic->bitfield_words; i++) {
83         uint32_t pending_enabled_not_claimed =
84                         (plic->pending[i] & ~plic->claimed[i]) &
85                             plic->enable[addrid * plic->bitfield_words + i];
86 
87         if (!pending_enabled_not_claimed) {
88             continue;
89         }
90 
91         for (j = 0; j < 32; j++) {
92             int irq = (i << 5) + j;
93             uint32_t prio = plic->source_priority[irq];
94             int enabled = pending_enabled_not_claimed & (1 << j);
95 
96             if (enabled && prio > max_prio) {
97                 max_irq = irq;
98                 max_prio = prio;
99             }
100         }
101     }
102 
103     return max_irq;
104 }
105 
106 static void sifive_plic_update(SiFivePLICState *plic)
107 {
108     int addrid;
109 
110     /* raise irq on harts where this irq is enabled */
111     for (addrid = 0; addrid < plic->num_addrs; addrid++) {
112         uint32_t hartid = plic->addr_config[addrid].hartid;
113         PLICMode mode = plic->addr_config[addrid].mode;
114         bool level = !!sifive_plic_claimed(plic, addrid);
115 
116         switch (mode) {
117         case PLICMode_M:
118             qemu_set_irq(plic->m_external_irqs[hartid - plic->hartid_base], level);
119             break;
120         case PLICMode_S:
121             qemu_set_irq(plic->s_external_irqs[hartid - plic->hartid_base], level);
122             break;
123         default:
124             break;
125         }
126     }
127 }
128 
129 static uint64_t sifive_plic_read(void *opaque, hwaddr addr, unsigned size)
130 {
131     SiFivePLICState *plic = opaque;
132 
133     if (addr_between(addr, plic->priority_base, plic->num_sources << 2)) {
134         uint32_t irq = ((addr - plic->priority_base) >> 2) + 1;
135 
136         return plic->source_priority[irq];
137     } else if (addr_between(addr, plic->pending_base, plic->num_sources >> 3)) {
138         uint32_t word = (addr - plic->pending_base) >> 2;
139 
140         return plic->pending[word];
141     } else if (addr_between(addr, plic->enable_base,
142                             plic->num_addrs * plic->enable_stride)) {
143         uint32_t addrid = (addr - plic->enable_base) / plic->enable_stride;
144         uint32_t wordid = (addr & (plic->enable_stride - 1)) >> 2;
145 
146         if (wordid < plic->bitfield_words) {
147             return plic->enable[addrid * plic->bitfield_words + wordid];
148         }
149     } else if (addr_between(addr, plic->context_base,
150                             plic->num_addrs * plic->context_stride)) {
151         uint32_t addrid = (addr - plic->context_base) / plic->context_stride;
152         uint32_t contextid = (addr & (plic->context_stride - 1));
153 
154         if (contextid == 0) {
155             return plic->target_priority[addrid];
156         } else if (contextid == 4) {
157             uint32_t max_irq = sifive_plic_claimed(plic, addrid);
158 
159             if (max_irq) {
160                 sifive_plic_set_pending(plic, max_irq, false);
161                 sifive_plic_set_claimed(plic, max_irq, true);
162             }
163 
164             sifive_plic_update(plic);
165             return max_irq;
166         }
167     }
168 
169     qemu_log_mask(LOG_GUEST_ERROR,
170                   "%s: Invalid register read 0x%" HWADDR_PRIx "\n",
171                   __func__, addr);
172     return 0;
173 }
174 
175 static void sifive_plic_write(void *opaque, hwaddr addr, uint64_t value,
176         unsigned size)
177 {
178     SiFivePLICState *plic = opaque;
179 
180     if (addr_between(addr, plic->priority_base, plic->num_sources << 2)) {
181         uint32_t irq = ((addr - plic->priority_base) >> 2) + 1;
182 
183         plic->source_priority[irq] = value & 7;
184         sifive_plic_update(plic);
185     } else if (addr_between(addr, plic->pending_base,
186                             plic->num_sources >> 3)) {
187         qemu_log_mask(LOG_GUEST_ERROR,
188                       "%s: invalid pending write: 0x%" HWADDR_PRIx "",
189                       __func__, addr);
190     } else if (addr_between(addr, plic->enable_base,
191                             plic->num_addrs * plic->enable_stride)) {
192         uint32_t addrid = (addr - plic->enable_base) / plic->enable_stride;
193         uint32_t wordid = (addr & (plic->enable_stride - 1)) >> 2;
194 
195         if (wordid < plic->bitfield_words) {
196             plic->enable[addrid * plic->bitfield_words + wordid] = value;
197         } else {
198             qemu_log_mask(LOG_GUEST_ERROR,
199                           "%s: Invalid enable write 0x%" HWADDR_PRIx "\n",
200                           __func__, addr);
201         }
202     } else if (addr_between(addr, plic->context_base,
203                             plic->num_addrs * plic->context_stride)) {
204         uint32_t addrid = (addr - plic->context_base) / plic->context_stride;
205         uint32_t contextid = (addr & (plic->context_stride - 1));
206 
207         if (contextid == 0) {
208             if (value <= plic->num_priorities) {
209                 plic->target_priority[addrid] = value;
210                 sifive_plic_update(plic);
211             }
212         } else if (contextid == 4) {
213             if (value < plic->num_sources) {
214                 sifive_plic_set_claimed(plic, value, false);
215                 sifive_plic_update(plic);
216             }
217         } else {
218             qemu_log_mask(LOG_GUEST_ERROR,
219                           "%s: Invalid context write 0x%" HWADDR_PRIx "\n",
220                           __func__, addr);
221         }
222     } else {
223         qemu_log_mask(LOG_GUEST_ERROR,
224                       "%s: Invalid register write 0x%" HWADDR_PRIx "\n",
225                       __func__, addr);
226     }
227 }
228 
229 static const MemoryRegionOps sifive_plic_ops = {
230     .read = sifive_plic_read,
231     .write = sifive_plic_write,
232     .endianness = DEVICE_LITTLE_ENDIAN,
233     .valid = {
234         .min_access_size = 4,
235         .max_access_size = 4
236     }
237 };
238 
239 static void sifive_plic_reset(DeviceState *dev)
240 {
241     SiFivePLICState *s = SIFIVE_PLIC(dev);
242     int i;
243 
244     memset(s->source_priority, 0, sizeof(uint32_t) * s->num_sources);
245     memset(s->target_priority, 0, sizeof(uint32_t) * s->num_addrs);
246     memset(s->pending, 0, sizeof(uint32_t) * s->bitfield_words);
247     memset(s->claimed, 0, sizeof(uint32_t) * s->bitfield_words);
248     memset(s->enable, 0, sizeof(uint32_t) * s->num_enables);
249 
250     for (i = 0; i < s->num_harts; i++) {
251         qemu_set_irq(s->m_external_irqs[i], 0);
252         qemu_set_irq(s->s_external_irqs[i], 0);
253     }
254 }
255 
256 /*
257  * parse PLIC hart/mode address offset config
258  *
259  * "M"              1 hart with M mode
260  * "MS,MS"          2 harts, 0-1 with M and S mode
261  * "M,MS,MS,MS,MS"  5 harts, 0 with M mode, 1-5 with M and S mode
262  */
263 static void parse_hart_config(SiFivePLICState *plic)
264 {
265     int addrid, hartid, modes;
266     const char *p;
267     char c;
268 
269     /* count and validate hart/mode combinations */
270     addrid = 0, hartid = 0, modes = 0;
271     p = plic->hart_config;
272     while ((c = *p++)) {
273         if (c == ',') {
274             addrid += ctpop8(modes);
275             modes = 0;
276             hartid++;
277         } else {
278             int m = 1 << char_to_mode(c);
279             if (modes == (modes | m)) {
280                 error_report("plic: duplicate mode '%c' in config: %s",
281                              c, plic->hart_config);
282                 exit(1);
283             }
284             modes |= m;
285         }
286     }
287     if (modes) {
288         addrid += ctpop8(modes);
289     }
290     hartid++;
291 
292     plic->num_addrs = addrid;
293     plic->num_harts = hartid;
294 
295     /* store hart/mode combinations */
296     plic->addr_config = g_new(PLICAddr, plic->num_addrs);
297     addrid = 0, hartid = plic->hartid_base;
298     p = plic->hart_config;
299     while ((c = *p++)) {
300         if (c == ',') {
301             hartid++;
302         } else {
303             plic->addr_config[addrid].addrid = addrid;
304             plic->addr_config[addrid].hartid = hartid;
305             plic->addr_config[addrid].mode = char_to_mode(c);
306             addrid++;
307         }
308     }
309 }
310 
311 static void sifive_plic_irq_request(void *opaque, int irq, int level)
312 {
313     SiFivePLICState *s = opaque;
314 
315     sifive_plic_set_pending(s, irq, level > 0);
316     sifive_plic_update(s);
317 }
318 
319 static void sifive_plic_realize(DeviceState *dev, Error **errp)
320 {
321     SiFivePLICState *s = SIFIVE_PLIC(dev);
322     int i;
323 
324     memory_region_init_io(&s->mmio, OBJECT(dev), &sifive_plic_ops, s,
325                           TYPE_SIFIVE_PLIC, s->aperture_size);
326     sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
327 
328     parse_hart_config(s);
329 
330     s->bitfield_words = (s->num_sources + 31) >> 5;
331     s->num_enables = s->bitfield_words * s->num_addrs;
332     s->source_priority = g_new0(uint32_t, s->num_sources);
333     s->target_priority = g_new(uint32_t, s->num_addrs);
334     s->pending = g_new0(uint32_t, s->bitfield_words);
335     s->claimed = g_new0(uint32_t, s->bitfield_words);
336     s->enable = g_new0(uint32_t, s->num_enables);
337 
338     qdev_init_gpio_in(dev, sifive_plic_irq_request, s->num_sources);
339 
340     s->s_external_irqs = g_malloc(sizeof(qemu_irq) * s->num_harts);
341     qdev_init_gpio_out(dev, s->s_external_irqs, s->num_harts);
342 
343     s->m_external_irqs = g_malloc(sizeof(qemu_irq) * s->num_harts);
344     qdev_init_gpio_out(dev, s->m_external_irqs, s->num_harts);
345 
346     /* We can't allow the supervisor to control SEIP as this would allow the
347      * supervisor to clear a pending external interrupt which will result in
348      * lost a interrupt in the case a PLIC is attached. The SEIP bit must be
349      * hardware controlled when a PLIC is attached.
350      */
351     for (i = 0; i < s->num_harts; i++) {
352         RISCVCPU *cpu = RISCV_CPU(qemu_get_cpu(s->hartid_base + i));
353         if (riscv_cpu_claim_interrupts(cpu, MIP_SEIP) < 0) {
354             error_report("SEIP already claimed");
355             exit(1);
356         }
357     }
358 
359     msi_nonbroken = true;
360 }
361 
362 static const VMStateDescription vmstate_sifive_plic = {
363     .name = "riscv_sifive_plic",
364     .version_id = 1,
365     .minimum_version_id = 1,
366     .fields = (VMStateField[]) {
367             VMSTATE_VARRAY_UINT32(source_priority, SiFivePLICState,
368                                   num_sources, 0,
369                                   vmstate_info_uint32, uint32_t),
370             VMSTATE_VARRAY_UINT32(target_priority, SiFivePLICState,
371                                   num_addrs, 0,
372                                   vmstate_info_uint32, uint32_t),
373             VMSTATE_VARRAY_UINT32(pending, SiFivePLICState, bitfield_words, 0,
374                                   vmstate_info_uint32, uint32_t),
375             VMSTATE_VARRAY_UINT32(claimed, SiFivePLICState, bitfield_words, 0,
376                                   vmstate_info_uint32, uint32_t),
377             VMSTATE_VARRAY_UINT32(enable, SiFivePLICState, num_enables, 0,
378                                   vmstate_info_uint32, uint32_t),
379             VMSTATE_END_OF_LIST()
380         }
381 };
382 
383 static Property sifive_plic_properties[] = {
384     DEFINE_PROP_STRING("hart-config", SiFivePLICState, hart_config),
385     DEFINE_PROP_UINT32("hartid-base", SiFivePLICState, hartid_base, 0),
386     DEFINE_PROP_UINT32("num-sources", SiFivePLICState, num_sources, 0),
387     DEFINE_PROP_UINT32("num-priorities", SiFivePLICState, num_priorities, 0),
388     DEFINE_PROP_UINT32("priority-base", SiFivePLICState, priority_base, 0),
389     DEFINE_PROP_UINT32("pending-base", SiFivePLICState, pending_base, 0),
390     DEFINE_PROP_UINT32("enable-base", SiFivePLICState, enable_base, 0),
391     DEFINE_PROP_UINT32("enable-stride", SiFivePLICState, enable_stride, 0),
392     DEFINE_PROP_UINT32("context-base", SiFivePLICState, context_base, 0),
393     DEFINE_PROP_UINT32("context-stride", SiFivePLICState, context_stride, 0),
394     DEFINE_PROP_UINT32("aperture-size", SiFivePLICState, aperture_size, 0),
395     DEFINE_PROP_END_OF_LIST(),
396 };
397 
398 static void sifive_plic_class_init(ObjectClass *klass, void *data)
399 {
400     DeviceClass *dc = DEVICE_CLASS(klass);
401 
402     dc->reset = sifive_plic_reset;
403     device_class_set_props(dc, sifive_plic_properties);
404     dc->realize = sifive_plic_realize;
405     dc->vmsd = &vmstate_sifive_plic;
406 }
407 
408 static const TypeInfo sifive_plic_info = {
409     .name          = TYPE_SIFIVE_PLIC,
410     .parent        = TYPE_SYS_BUS_DEVICE,
411     .instance_size = sizeof(SiFivePLICState),
412     .class_init    = sifive_plic_class_init,
413 };
414 
415 static void sifive_plic_register_types(void)
416 {
417     type_register_static(&sifive_plic_info);
418 }
419 
420 type_init(sifive_plic_register_types)
421 
422 /*
423  * Create PLIC device.
424  */
425 DeviceState *sifive_plic_create(hwaddr addr, char *hart_config,
426     uint32_t num_harts,
427     uint32_t hartid_base, uint32_t num_sources,
428     uint32_t num_priorities, uint32_t priority_base,
429     uint32_t pending_base, uint32_t enable_base,
430     uint32_t enable_stride, uint32_t context_base,
431     uint32_t context_stride, uint32_t aperture_size)
432 {
433     DeviceState *dev = qdev_new(TYPE_SIFIVE_PLIC);
434     int i, j = 0;
435     SiFivePLICState *plic;
436 
437     assert(enable_stride == (enable_stride & -enable_stride));
438     assert(context_stride == (context_stride & -context_stride));
439     qdev_prop_set_string(dev, "hart-config", hart_config);
440     qdev_prop_set_uint32(dev, "hartid-base", hartid_base);
441     qdev_prop_set_uint32(dev, "num-sources", num_sources);
442     qdev_prop_set_uint32(dev, "num-priorities", num_priorities);
443     qdev_prop_set_uint32(dev, "priority-base", priority_base);
444     qdev_prop_set_uint32(dev, "pending-base", pending_base);
445     qdev_prop_set_uint32(dev, "enable-base", enable_base);
446     qdev_prop_set_uint32(dev, "enable-stride", enable_stride);
447     qdev_prop_set_uint32(dev, "context-base", context_base);
448     qdev_prop_set_uint32(dev, "context-stride", context_stride);
449     qdev_prop_set_uint32(dev, "aperture-size", aperture_size);
450     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
451     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, addr);
452 
453     plic = SIFIVE_PLIC(dev);
454     for (i = 0; i < num_harts; i++) {
455         CPUState *cpu = qemu_get_cpu(hartid_base + i);
456 
457         if (plic->addr_config[j].mode == PLICMode_M) {
458             j++;
459             qdev_connect_gpio_out(dev, num_harts + i,
460                                   qdev_get_gpio_in(DEVICE(cpu), IRQ_M_EXT));
461         }
462 
463         if (plic->addr_config[j].mode == PLICMode_S) {
464             j++;
465             qdev_connect_gpio_out(dev, i,
466                                   qdev_get_gpio_in(DEVICE(cpu), IRQ_S_EXT));
467         }
468     }
469 
470     return dev;
471 }
472