1 /* 2 * Arm PrimeCell PL190 Vector Interrupt Controller 3 * 4 * Copyright (c) 2006 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "hw/irq.h" 12 #include "hw/sysbus.h" 13 #include "migration/vmstate.h" 14 #include "qemu/log.h" 15 #include "qemu/module.h" 16 #include "qom/object.h" 17 18 /* The number of virtual priority levels. 16 user vectors plus the 19 unvectored IRQ. Chained interrupts would require an additional level 20 if implemented. */ 21 22 #define PL190_NUM_PRIO 17 23 24 #define TYPE_PL190 "pl190" 25 OBJECT_DECLARE_SIMPLE_TYPE(PL190State, PL190) 26 27 struct PL190State { 28 SysBusDevice parent_obj; 29 30 MemoryRegion iomem; 31 uint32_t level; 32 uint32_t soft_level; 33 uint32_t irq_enable; 34 uint32_t fiq_select; 35 uint8_t vect_control[16]; 36 uint32_t vect_addr[PL190_NUM_PRIO]; 37 /* Mask containing interrupts with higher priority than this one. */ 38 uint32_t prio_mask[PL190_NUM_PRIO + 1]; 39 int protected; 40 /* Current priority level. */ 41 int priority; 42 int prev_prio[PL190_NUM_PRIO]; 43 qemu_irq irq; 44 qemu_irq fiq; 45 }; 46 47 static const unsigned char pl190_id[] = 48 { 0x90, 0x11, 0x04, 0x00, 0x0D, 0xf0, 0x05, 0xb1 }; 49 50 static inline uint32_t pl190_irq_level(PL190State *s) 51 { 52 return (s->level | s->soft_level) & s->irq_enable & ~s->fiq_select; 53 } 54 55 /* Update interrupts. */ 56 static void pl190_update(PL190State *s) 57 { 58 uint32_t level = pl190_irq_level(s); 59 int set; 60 61 set = (level & s->prio_mask[s->priority]) != 0; 62 qemu_set_irq(s->irq, set); 63 set = ((s->level | s->soft_level) & s->fiq_select) != 0; 64 qemu_set_irq(s->fiq, set); 65 } 66 67 static void pl190_set_irq(void *opaque, int irq, int level) 68 { 69 PL190State *s = (PL190State *)opaque; 70 71 if (level) 72 s->level |= 1u << irq; 73 else 74 s->level &= ~(1u << irq); 75 pl190_update(s); 76 } 77 78 static void pl190_update_vectors(PL190State *s) 79 { 80 uint32_t mask; 81 int i; 82 int n; 83 84 mask = 0; 85 for (i = 0; i < 16; i++) 86 { 87 s->prio_mask[i] = mask; 88 if (s->vect_control[i] & 0x20) 89 { 90 n = s->vect_control[i] & 0x1f; 91 mask |= 1 << n; 92 } 93 } 94 s->prio_mask[16] = mask; 95 pl190_update(s); 96 } 97 98 static uint64_t pl190_read(void *opaque, hwaddr offset, 99 unsigned size) 100 { 101 PL190State *s = (PL190State *)opaque; 102 int i; 103 104 if (offset >= 0xfe0 && offset < 0x1000) { 105 return pl190_id[(offset - 0xfe0) >> 2]; 106 } 107 if (offset >= 0x100 && offset < 0x140) { 108 return s->vect_addr[(offset - 0x100) >> 2]; 109 } 110 if (offset >= 0x200 && offset < 0x240) { 111 return s->vect_control[(offset - 0x200) >> 2]; 112 } 113 switch (offset >> 2) { 114 case 0: /* IRQSTATUS */ 115 return pl190_irq_level(s); 116 case 1: /* FIQSATUS */ 117 return (s->level | s->soft_level) & s->fiq_select; 118 case 2: /* RAWINTR */ 119 return s->level | s->soft_level; 120 case 3: /* INTSELECT */ 121 return s->fiq_select; 122 case 4: /* INTENABLE */ 123 return s->irq_enable; 124 case 6: /* SOFTINT */ 125 return s->soft_level; 126 case 8: /* PROTECTION */ 127 return s->protected; 128 case 12: /* VECTADDR */ 129 /* Read vector address at the start of an ISR. Increases the 130 * current priority level to that of the current interrupt. 131 * 132 * Since an enabled interrupt X at priority P causes prio_mask[Y] 133 * to have bit X set for all Y > P, this loop will stop with 134 * i == the priority of the highest priority set interrupt. 135 */ 136 for (i = 0; i < s->priority; i++) { 137 if ((s->level | s->soft_level) & s->prio_mask[i + 1]) { 138 break; 139 } 140 } 141 142 /* Reading this value with no pending interrupts is undefined. 143 We return the default address. */ 144 if (i == PL190_NUM_PRIO) 145 return s->vect_addr[16]; 146 if (i < s->priority) 147 { 148 s->prev_prio[i] = s->priority; 149 s->priority = i; 150 pl190_update(s); 151 } 152 return s->vect_addr[s->priority]; 153 case 13: /* DEFVECTADDR */ 154 return s->vect_addr[16]; 155 default: 156 qemu_log_mask(LOG_GUEST_ERROR, 157 "pl190_read: Bad offset %x\n", (int)offset); 158 return 0; 159 } 160 } 161 162 static void pl190_write(void *opaque, hwaddr offset, 163 uint64_t val, unsigned size) 164 { 165 PL190State *s = (PL190State *)opaque; 166 167 if (offset >= 0x100 && offset < 0x140) { 168 s->vect_addr[(offset - 0x100) >> 2] = val; 169 pl190_update_vectors(s); 170 return; 171 } 172 if (offset >= 0x200 && offset < 0x240) { 173 s->vect_control[(offset - 0x200) >> 2] = val; 174 pl190_update_vectors(s); 175 return; 176 } 177 switch (offset >> 2) { 178 case 0: /* SELECT */ 179 /* This is a readonly register, but linux tries to write to it 180 anyway. Ignore the write. */ 181 break; 182 case 3: /* INTSELECT */ 183 s->fiq_select = val; 184 break; 185 case 4: /* INTENABLE */ 186 s->irq_enable |= val; 187 break; 188 case 5: /* INTENCLEAR */ 189 s->irq_enable &= ~val; 190 break; 191 case 6: /* SOFTINT */ 192 s->soft_level |= val; 193 break; 194 case 7: /* SOFTINTCLEAR */ 195 s->soft_level &= ~val; 196 break; 197 case 8: /* PROTECTION */ 198 /* TODO: Protection (supervisor only access) is not implemented. */ 199 s->protected = val & 1; 200 break; 201 case 12: /* VECTADDR */ 202 /* Restore the previous priority level. The value written is 203 ignored. */ 204 if (s->priority < PL190_NUM_PRIO) 205 s->priority = s->prev_prio[s->priority]; 206 break; 207 case 13: /* DEFVECTADDR */ 208 s->vect_addr[16] = val; 209 break; 210 case 0xc0: /* ITCR */ 211 if (val) { 212 qemu_log_mask(LOG_UNIMP, "pl190: Test mode not implemented\n"); 213 } 214 break; 215 default: 216 qemu_log_mask(LOG_GUEST_ERROR, 217 "pl190_write: Bad offset %x\n", (int)offset); 218 return; 219 } 220 pl190_update(s); 221 } 222 223 static const MemoryRegionOps pl190_ops = { 224 .read = pl190_read, 225 .write = pl190_write, 226 .endianness = DEVICE_NATIVE_ENDIAN, 227 }; 228 229 static void pl190_reset(DeviceState *d) 230 { 231 PL190State *s = PL190(d); 232 int i; 233 234 for (i = 0; i < 16; i++) { 235 s->vect_addr[i] = 0; 236 s->vect_control[i] = 0; 237 } 238 s->vect_addr[16] = 0; 239 s->prio_mask[17] = 0xffffffff; 240 s->priority = PL190_NUM_PRIO; 241 pl190_update_vectors(s); 242 } 243 244 static void pl190_init(Object *obj) 245 { 246 DeviceState *dev = DEVICE(obj); 247 PL190State *s = PL190(obj); 248 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 249 250 memory_region_init_io(&s->iomem, obj, &pl190_ops, s, "pl190", 0x1000); 251 sysbus_init_mmio(sbd, &s->iomem); 252 qdev_init_gpio_in(dev, pl190_set_irq, 32); 253 sysbus_init_irq(sbd, &s->irq); 254 sysbus_init_irq(sbd, &s->fiq); 255 } 256 257 static const VMStateDescription vmstate_pl190 = { 258 .name = "pl190", 259 .version_id = 1, 260 .minimum_version_id = 1, 261 .fields = (const VMStateField[]) { 262 VMSTATE_UINT32(level, PL190State), 263 VMSTATE_UINT32(soft_level, PL190State), 264 VMSTATE_UINT32(irq_enable, PL190State), 265 VMSTATE_UINT32(fiq_select, PL190State), 266 VMSTATE_UINT8_ARRAY(vect_control, PL190State, 16), 267 VMSTATE_UINT32_ARRAY(vect_addr, PL190State, PL190_NUM_PRIO), 268 VMSTATE_UINT32_ARRAY(prio_mask, PL190State, PL190_NUM_PRIO+1), 269 VMSTATE_INT32(protected, PL190State), 270 VMSTATE_INT32(priority, PL190State), 271 VMSTATE_INT32_ARRAY(prev_prio, PL190State, PL190_NUM_PRIO), 272 VMSTATE_END_OF_LIST() 273 } 274 }; 275 276 static void pl190_class_init(ObjectClass *klass, void *data) 277 { 278 DeviceClass *dc = DEVICE_CLASS(klass); 279 280 dc->reset = pl190_reset; 281 dc->vmsd = &vmstate_pl190; 282 } 283 284 static const TypeInfo pl190_info = { 285 .name = TYPE_PL190, 286 .parent = TYPE_SYS_BUS_DEVICE, 287 .instance_size = sizeof(PL190State), 288 .instance_init = pl190_init, 289 .class_init = pl190_class_init, 290 }; 291 292 static void pl190_register_types(void) 293 { 294 type_register_static(&pl190_info); 295 } 296 297 type_init(pl190_register_types) 298