xref: /openbmc/qemu/hw/intc/omap_intc.c (revision 139c1837)
1 /*
2  * TI OMAP interrupt controller emulation.
3  *
4  * Copyright (C) 2006-2008 Andrzej Zaborowski  <balrog@zabor.org>
5  * Copyright (C) 2007-2008 Nokia Corporation
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 or
10  * (at your option) version 3 of the License.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License along
18  * with this program; if not, see <http://www.gnu.org/licenses/>.
19  */
20 
21 #include "qemu/osdep.h"
22 #include "hw/irq.h"
23 #include "hw/qdev-properties.h"
24 #include "hw/arm/omap.h"
25 #include "hw/sysbus.h"
26 #include "qemu/error-report.h"
27 #include "qemu/module.h"
28 #include "qapi/error.h"
29 
30 /* Interrupt Handlers */
31 struct omap_intr_handler_bank_s {
32     uint32_t irqs;
33     uint32_t inputs;
34     uint32_t mask;
35     uint32_t fiq;
36     uint32_t sens_edge;
37     uint32_t swi;
38     unsigned char priority[32];
39 };
40 
41 struct omap_intr_handler_s {
42     SysBusDevice parent_obj;
43 
44     qemu_irq *pins;
45     qemu_irq parent_intr[2];
46     MemoryRegion mmio;
47     void *iclk;
48     void *fclk;
49     unsigned char nbanks;
50     int level_only;
51     uint32_t size;
52 
53     uint8_t revision;
54 
55     /* state */
56     uint32_t new_agr[2];
57     int sir_intr[2];
58     int autoidle;
59     uint32_t mask;
60     struct omap_intr_handler_bank_s bank[3];
61 };
62 
63 static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq)
64 {
65     int i, j, sir_intr, p_intr, p;
66     uint32_t level;
67     sir_intr = 0;
68     p_intr = 255;
69 
70     /* Find the interrupt line with the highest dynamic priority.
71      * Note: 0 denotes the hightest priority.
72      * If all interrupts have the same priority, the default order is IRQ_N,
73      * IRQ_N-1,...,IRQ_0. */
74     for (j = 0; j < s->nbanks; ++j) {
75         level = s->bank[j].irqs & ~s->bank[j].mask &
76                 (is_fiq ? s->bank[j].fiq : ~s->bank[j].fiq);
77 
78         while (level != 0) {
79             i = ctz32(level);
80             p = s->bank[j].priority[i];
81             if (p <= p_intr) {
82                 p_intr = p;
83                 sir_intr = 32 * j + i;
84             }
85             level &= level - 1;
86         }
87     }
88     s->sir_intr[is_fiq] = sir_intr;
89 }
90 
91 static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq)
92 {
93     int i;
94     uint32_t has_intr = 0;
95 
96     for (i = 0; i < s->nbanks; ++i)
97         has_intr |= s->bank[i].irqs & ~s->bank[i].mask &
98                 (is_fiq ? s->bank[i].fiq : ~s->bank[i].fiq);
99 
100     if (s->new_agr[is_fiq] & has_intr & s->mask) {
101         s->new_agr[is_fiq] = 0;
102         omap_inth_sir_update(s, is_fiq);
103         qemu_set_irq(s->parent_intr[is_fiq], 1);
104     }
105 }
106 
107 #define INT_FALLING_EDGE	0
108 #define INT_LOW_LEVEL		1
109 
110 static void omap_set_intr(void *opaque, int irq, int req)
111 {
112     struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque;
113     uint32_t rise;
114 
115     struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5];
116     int n = irq & 31;
117 
118     if (req) {
119         rise = ~bank->irqs & (1 << n);
120         if (~bank->sens_edge & (1 << n))
121             rise &= ~bank->inputs;
122 
123         bank->inputs |= (1 << n);
124         if (rise) {
125             bank->irqs |= rise;
126             omap_inth_update(ih, 0);
127             omap_inth_update(ih, 1);
128         }
129     } else {
130         rise = bank->sens_edge & bank->irqs & (1 << n);
131         bank->irqs &= ~rise;
132         bank->inputs &= ~(1 << n);
133     }
134 }
135 
136 /* Simplified version with no edge detection */
137 static void omap_set_intr_noedge(void *opaque, int irq, int req)
138 {
139     struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque;
140     uint32_t rise;
141 
142     struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5];
143     int n = irq & 31;
144 
145     if (req) {
146         rise = ~bank->inputs & (1 << n);
147         if (rise) {
148             bank->irqs |= bank->inputs |= rise;
149             omap_inth_update(ih, 0);
150             omap_inth_update(ih, 1);
151         }
152     } else
153         bank->irqs = (bank->inputs &= ~(1 << n)) | bank->swi;
154 }
155 
156 static uint64_t omap_inth_read(void *opaque, hwaddr addr,
157                                unsigned size)
158 {
159     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
160     int i, offset = addr;
161     int bank_no = offset >> 8;
162     int line_no;
163     struct omap_intr_handler_bank_s *bank = &s->bank[bank_no];
164     offset &= 0xff;
165 
166     switch (offset) {
167     case 0x00:	/* ITR */
168         return bank->irqs;
169 
170     case 0x04:	/* MIR */
171         return bank->mask;
172 
173     case 0x10:	/* SIR_IRQ_CODE */
174     case 0x14:  /* SIR_FIQ_CODE */
175         if (bank_no != 0)
176             break;
177         line_no = s->sir_intr[(offset - 0x10) >> 2];
178         bank = &s->bank[line_no >> 5];
179         i = line_no & 31;
180         if (((bank->sens_edge >> i) & 1) == INT_FALLING_EDGE)
181             bank->irqs &= ~(1 << i);
182         return line_no;
183 
184     case 0x18:	/* CONTROL_REG */
185         if (bank_no != 0)
186             break;
187         return 0;
188 
189     case 0x1c:	/* ILR0 */
190     case 0x20:	/* ILR1 */
191     case 0x24:	/* ILR2 */
192     case 0x28:	/* ILR3 */
193     case 0x2c:	/* ILR4 */
194     case 0x30:	/* ILR5 */
195     case 0x34:	/* ILR6 */
196     case 0x38:	/* ILR7 */
197     case 0x3c:	/* ILR8 */
198     case 0x40:	/* ILR9 */
199     case 0x44:	/* ILR10 */
200     case 0x48:	/* ILR11 */
201     case 0x4c:	/* ILR12 */
202     case 0x50:	/* ILR13 */
203     case 0x54:	/* ILR14 */
204     case 0x58:	/* ILR15 */
205     case 0x5c:	/* ILR16 */
206     case 0x60:	/* ILR17 */
207     case 0x64:	/* ILR18 */
208     case 0x68:	/* ILR19 */
209     case 0x6c:	/* ILR20 */
210     case 0x70:	/* ILR21 */
211     case 0x74:	/* ILR22 */
212     case 0x78:	/* ILR23 */
213     case 0x7c:	/* ILR24 */
214     case 0x80:	/* ILR25 */
215     case 0x84:	/* ILR26 */
216     case 0x88:	/* ILR27 */
217     case 0x8c:	/* ILR28 */
218     case 0x90:	/* ILR29 */
219     case 0x94:	/* ILR30 */
220     case 0x98:	/* ILR31 */
221         i = (offset - 0x1c) >> 2;
222         return (bank->priority[i] << 2) |
223                 (((bank->sens_edge >> i) & 1) << 1) |
224                 ((bank->fiq >> i) & 1);
225 
226     case 0x9c:	/* ISR */
227         return 0x00000000;
228 
229     }
230     OMAP_BAD_REG(addr);
231     return 0;
232 }
233 
234 static void omap_inth_write(void *opaque, hwaddr addr,
235                             uint64_t value, unsigned size)
236 {
237     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
238     int i, offset = addr;
239     int bank_no = offset >> 8;
240     struct omap_intr_handler_bank_s *bank = &s->bank[bank_no];
241     offset &= 0xff;
242 
243     switch (offset) {
244     case 0x00:	/* ITR */
245         /* Important: ignore the clearing if the IRQ is level-triggered and
246            the input bit is 1 */
247         bank->irqs &= value | (bank->inputs & bank->sens_edge);
248         return;
249 
250     case 0x04:	/* MIR */
251         bank->mask = value;
252         omap_inth_update(s, 0);
253         omap_inth_update(s, 1);
254         return;
255 
256     case 0x10:	/* SIR_IRQ_CODE */
257     case 0x14:	/* SIR_FIQ_CODE */
258         OMAP_RO_REG(addr);
259         break;
260 
261     case 0x18:	/* CONTROL_REG */
262         if (bank_no != 0)
263             break;
264         if (value & 2) {
265             qemu_set_irq(s->parent_intr[1], 0);
266             s->new_agr[1] = ~0;
267             omap_inth_update(s, 1);
268         }
269         if (value & 1) {
270             qemu_set_irq(s->parent_intr[0], 0);
271             s->new_agr[0] = ~0;
272             omap_inth_update(s, 0);
273         }
274         return;
275 
276     case 0x1c:	/* ILR0 */
277     case 0x20:	/* ILR1 */
278     case 0x24:	/* ILR2 */
279     case 0x28:	/* ILR3 */
280     case 0x2c:	/* ILR4 */
281     case 0x30:	/* ILR5 */
282     case 0x34:	/* ILR6 */
283     case 0x38:	/* ILR7 */
284     case 0x3c:	/* ILR8 */
285     case 0x40:	/* ILR9 */
286     case 0x44:	/* ILR10 */
287     case 0x48:	/* ILR11 */
288     case 0x4c:	/* ILR12 */
289     case 0x50:	/* ILR13 */
290     case 0x54:	/* ILR14 */
291     case 0x58:	/* ILR15 */
292     case 0x5c:	/* ILR16 */
293     case 0x60:	/* ILR17 */
294     case 0x64:	/* ILR18 */
295     case 0x68:	/* ILR19 */
296     case 0x6c:	/* ILR20 */
297     case 0x70:	/* ILR21 */
298     case 0x74:	/* ILR22 */
299     case 0x78:	/* ILR23 */
300     case 0x7c:	/* ILR24 */
301     case 0x80:	/* ILR25 */
302     case 0x84:	/* ILR26 */
303     case 0x88:	/* ILR27 */
304     case 0x8c:	/* ILR28 */
305     case 0x90:	/* ILR29 */
306     case 0x94:	/* ILR30 */
307     case 0x98:	/* ILR31 */
308         i = (offset - 0x1c) >> 2;
309         bank->priority[i] = (value >> 2) & 0x1f;
310         bank->sens_edge &= ~(1 << i);
311         bank->sens_edge |= ((value >> 1) & 1) << i;
312         bank->fiq &= ~(1 << i);
313         bank->fiq |= (value & 1) << i;
314         return;
315 
316     case 0x9c:	/* ISR */
317         for (i = 0; i < 32; i ++)
318             if (value & (1 << i)) {
319                 omap_set_intr(s, 32 * bank_no + i, 1);
320                 return;
321             }
322         return;
323     }
324     OMAP_BAD_REG(addr);
325 }
326 
327 static const MemoryRegionOps omap_inth_mem_ops = {
328     .read = omap_inth_read,
329     .write = omap_inth_write,
330     .endianness = DEVICE_NATIVE_ENDIAN,
331     .valid = {
332         .min_access_size = 4,
333         .max_access_size = 4,
334     },
335 };
336 
337 static void omap_inth_reset(DeviceState *dev)
338 {
339     struct omap_intr_handler_s *s = OMAP_INTC(dev);
340     int i;
341 
342     for (i = 0; i < s->nbanks; ++i){
343         s->bank[i].irqs = 0x00000000;
344         s->bank[i].mask = 0xffffffff;
345         s->bank[i].sens_edge = 0x00000000;
346         s->bank[i].fiq = 0x00000000;
347         s->bank[i].inputs = 0x00000000;
348         s->bank[i].swi = 0x00000000;
349         memset(s->bank[i].priority, 0, sizeof(s->bank[i].priority));
350 
351         if (s->level_only)
352             s->bank[i].sens_edge = 0xffffffff;
353     }
354 
355     s->new_agr[0] = ~0;
356     s->new_agr[1] = ~0;
357     s->sir_intr[0] = 0;
358     s->sir_intr[1] = 0;
359     s->autoidle = 0;
360     s->mask = ~0;
361 
362     qemu_set_irq(s->parent_intr[0], 0);
363     qemu_set_irq(s->parent_intr[1], 0);
364 }
365 
366 static void omap_intc_init(Object *obj)
367 {
368     DeviceState *dev = DEVICE(obj);
369     struct omap_intr_handler_s *s = OMAP_INTC(obj);
370     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
371 
372     s->nbanks = 1;
373     sysbus_init_irq(sbd, &s->parent_intr[0]);
374     sysbus_init_irq(sbd, &s->parent_intr[1]);
375     qdev_init_gpio_in(dev, omap_set_intr, s->nbanks * 32);
376     memory_region_init_io(&s->mmio, obj, &omap_inth_mem_ops, s,
377                           "omap-intc", s->size);
378     sysbus_init_mmio(sbd, &s->mmio);
379 }
380 
381 static void omap_intc_realize(DeviceState *dev, Error **errp)
382 {
383     struct omap_intr_handler_s *s = OMAP_INTC(dev);
384 
385     if (!s->iclk) {
386         error_setg(errp, "omap-intc: clk not connected");
387     }
388 }
389 
390 void omap_intc_set_iclk(omap_intr_handler *intc, omap_clk clk)
391 {
392     intc->iclk = clk;
393 }
394 
395 void omap_intc_set_fclk(omap_intr_handler *intc, omap_clk clk)
396 {
397     intc->fclk = clk;
398 }
399 
400 static Property omap_intc_properties[] = {
401     DEFINE_PROP_UINT32("size", struct omap_intr_handler_s, size, 0x100),
402     DEFINE_PROP_END_OF_LIST(),
403 };
404 
405 static void omap_intc_class_init(ObjectClass *klass, void *data)
406 {
407     DeviceClass *dc = DEVICE_CLASS(klass);
408 
409     dc->reset = omap_inth_reset;
410     device_class_set_props(dc, omap_intc_properties);
411     /* Reason: pointer property "clk" */
412     dc->user_creatable = false;
413     dc->realize = omap_intc_realize;
414 }
415 
416 static const TypeInfo omap_intc_info = {
417     .name          = "omap-intc",
418     .parent        = TYPE_OMAP_INTC,
419     .instance_init = omap_intc_init,
420     .class_init    = omap_intc_class_init,
421 };
422 
423 static uint64_t omap2_inth_read(void *opaque, hwaddr addr,
424                                 unsigned size)
425 {
426     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
427     int offset = addr;
428     int bank_no, line_no;
429     struct omap_intr_handler_bank_s *bank = NULL;
430 
431     if ((offset & 0xf80) == 0x80) {
432         bank_no = (offset & 0x60) >> 5;
433         if (bank_no < s->nbanks) {
434             offset &= ~0x60;
435             bank = &s->bank[bank_no];
436         } else {
437             OMAP_BAD_REG(addr);
438             return 0;
439         }
440     }
441 
442     switch (offset) {
443     case 0x00:	/* INTC_REVISION */
444         return s->revision;
445 
446     case 0x10:	/* INTC_SYSCONFIG */
447         return (s->autoidle >> 2) & 1;
448 
449     case 0x14:	/* INTC_SYSSTATUS */
450         return 1;						/* RESETDONE */
451 
452     case 0x40:	/* INTC_SIR_IRQ */
453         return s->sir_intr[0];
454 
455     case 0x44:	/* INTC_SIR_FIQ */
456         return s->sir_intr[1];
457 
458     case 0x48:	/* INTC_CONTROL */
459         return (!s->mask) << 2;					/* GLOBALMASK */
460 
461     case 0x4c:	/* INTC_PROTECTION */
462         return 0;
463 
464     case 0x50:	/* INTC_IDLE */
465         return s->autoidle & 3;
466 
467     /* Per-bank registers */
468     case 0x80:	/* INTC_ITR */
469         return bank->inputs;
470 
471     case 0x84:	/* INTC_MIR */
472         return bank->mask;
473 
474     case 0x88:	/* INTC_MIR_CLEAR */
475     case 0x8c:	/* INTC_MIR_SET */
476         return 0;
477 
478     case 0x90:	/* INTC_ISR_SET */
479         return bank->swi;
480 
481     case 0x94:	/* INTC_ISR_CLEAR */
482         return 0;
483 
484     case 0x98:	/* INTC_PENDING_IRQ */
485         return bank->irqs & ~bank->mask & ~bank->fiq;
486 
487     case 0x9c:	/* INTC_PENDING_FIQ */
488         return bank->irqs & ~bank->mask & bank->fiq;
489 
490     /* Per-line registers */
491     case 0x100 ... 0x300:	/* INTC_ILR */
492         bank_no = (offset - 0x100) >> 7;
493         if (bank_no > s->nbanks)
494             break;
495         bank = &s->bank[bank_no];
496         line_no = (offset & 0x7f) >> 2;
497         return (bank->priority[line_no] << 2) |
498                 ((bank->fiq >> line_no) & 1);
499     }
500     OMAP_BAD_REG(addr);
501     return 0;
502 }
503 
504 static void omap2_inth_write(void *opaque, hwaddr addr,
505                              uint64_t value, unsigned size)
506 {
507     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
508     int offset = addr;
509     int bank_no, line_no;
510     struct omap_intr_handler_bank_s *bank = NULL;
511 
512     if ((offset & 0xf80) == 0x80) {
513         bank_no = (offset & 0x60) >> 5;
514         if (bank_no < s->nbanks) {
515             offset &= ~0x60;
516             bank = &s->bank[bank_no];
517         } else {
518             OMAP_BAD_REG(addr);
519             return;
520         }
521     }
522 
523     switch (offset) {
524     case 0x10:	/* INTC_SYSCONFIG */
525         s->autoidle &= 4;
526         s->autoidle |= (value & 1) << 2;
527         if (value & 2) {                                        /* SOFTRESET */
528             omap_inth_reset(DEVICE(s));
529         }
530         return;
531 
532     case 0x48:	/* INTC_CONTROL */
533         s->mask = (value & 4) ? 0 : ~0;				/* GLOBALMASK */
534         if (value & 2) {					/* NEWFIQAGR */
535             qemu_set_irq(s->parent_intr[1], 0);
536             s->new_agr[1] = ~0;
537             omap_inth_update(s, 1);
538         }
539         if (value & 1) {					/* NEWIRQAGR */
540             qemu_set_irq(s->parent_intr[0], 0);
541             s->new_agr[0] = ~0;
542             omap_inth_update(s, 0);
543         }
544         return;
545 
546     case 0x4c:	/* INTC_PROTECTION */
547         /* TODO: Make a bitmap (or sizeof(char)map) of access privileges
548          * for every register, see Chapter 3 and 4 for privileged mode.  */
549         if (value & 1)
550             fprintf(stderr, "%s: protection mode enable attempt\n",
551                             __func__);
552         return;
553 
554     case 0x50:	/* INTC_IDLE */
555         s->autoidle &= ~3;
556         s->autoidle |= value & 3;
557         return;
558 
559     /* Per-bank registers */
560     case 0x84:	/* INTC_MIR */
561         bank->mask = value;
562         omap_inth_update(s, 0);
563         omap_inth_update(s, 1);
564         return;
565 
566     case 0x88:	/* INTC_MIR_CLEAR */
567         bank->mask &= ~value;
568         omap_inth_update(s, 0);
569         omap_inth_update(s, 1);
570         return;
571 
572     case 0x8c:	/* INTC_MIR_SET */
573         bank->mask |= value;
574         return;
575 
576     case 0x90:	/* INTC_ISR_SET */
577         bank->irqs |= bank->swi |= value;
578         omap_inth_update(s, 0);
579         omap_inth_update(s, 1);
580         return;
581 
582     case 0x94:	/* INTC_ISR_CLEAR */
583         bank->swi &= ~value;
584         bank->irqs = bank->swi & bank->inputs;
585         return;
586 
587     /* Per-line registers */
588     case 0x100 ... 0x300:	/* INTC_ILR */
589         bank_no = (offset - 0x100) >> 7;
590         if (bank_no > s->nbanks)
591             break;
592         bank = &s->bank[bank_no];
593         line_no = (offset & 0x7f) >> 2;
594         bank->priority[line_no] = (value >> 2) & 0x3f;
595         bank->fiq &= ~(1 << line_no);
596         bank->fiq |= (value & 1) << line_no;
597         return;
598 
599     case 0x00:	/* INTC_REVISION */
600     case 0x14:	/* INTC_SYSSTATUS */
601     case 0x40:	/* INTC_SIR_IRQ */
602     case 0x44:	/* INTC_SIR_FIQ */
603     case 0x80:	/* INTC_ITR */
604     case 0x98:	/* INTC_PENDING_IRQ */
605     case 0x9c:	/* INTC_PENDING_FIQ */
606         OMAP_RO_REG(addr);
607         return;
608     }
609     OMAP_BAD_REG(addr);
610 }
611 
612 static const MemoryRegionOps omap2_inth_mem_ops = {
613     .read = omap2_inth_read,
614     .write = omap2_inth_write,
615     .endianness = DEVICE_NATIVE_ENDIAN,
616     .valid = {
617         .min_access_size = 4,
618         .max_access_size = 4,
619     },
620 };
621 
622 static void omap2_intc_init(Object *obj)
623 {
624     DeviceState *dev = DEVICE(obj);
625     struct omap_intr_handler_s *s = OMAP_INTC(obj);
626     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
627 
628     s->level_only = 1;
629     s->nbanks = 3;
630     sysbus_init_irq(sbd, &s->parent_intr[0]);
631     sysbus_init_irq(sbd, &s->parent_intr[1]);
632     qdev_init_gpio_in(dev, omap_set_intr_noedge, s->nbanks * 32);
633     memory_region_init_io(&s->mmio, obj, &omap2_inth_mem_ops, s,
634                           "omap2-intc", 0x1000);
635     sysbus_init_mmio(sbd, &s->mmio);
636 }
637 
638 static void omap2_intc_realize(DeviceState *dev, Error **errp)
639 {
640     struct omap_intr_handler_s *s = OMAP_INTC(dev);
641 
642     if (!s->iclk) {
643         error_setg(errp, "omap2-intc: iclk not connected");
644         return;
645     }
646     if (!s->fclk) {
647         error_setg(errp, "omap2-intc: fclk not connected");
648         return;
649     }
650 }
651 
652 static Property omap2_intc_properties[] = {
653     DEFINE_PROP_UINT8("revision", struct omap_intr_handler_s,
654     revision, 0x21),
655     DEFINE_PROP_END_OF_LIST(),
656 };
657 
658 static void omap2_intc_class_init(ObjectClass *klass, void *data)
659 {
660     DeviceClass *dc = DEVICE_CLASS(klass);
661 
662     dc->reset = omap_inth_reset;
663     device_class_set_props(dc, omap2_intc_properties);
664     /* Reason: pointer property "iclk", "fclk" */
665     dc->user_creatable = false;
666     dc->realize = omap2_intc_realize;
667 }
668 
669 static const TypeInfo omap2_intc_info = {
670     .name          = "omap2-intc",
671     .parent        = TYPE_OMAP_INTC,
672     .instance_init = omap2_intc_init,
673     .class_init    = omap2_intc_class_init,
674 };
675 
676 static const TypeInfo omap_intc_type_info = {
677     .name          = TYPE_OMAP_INTC,
678     .parent        = TYPE_SYS_BUS_DEVICE,
679     .instance_size = sizeof(struct omap_intr_handler_s),
680     .abstract      = true,
681 };
682 
683 static void omap_intc_register_types(void)
684 {
685     type_register_static(&omap_intc_type_info);
686     type_register_static(&omap_intc_info);
687     type_register_static(&omap2_intc_info);
688 }
689 
690 type_init(omap_intc_register_types)
691