xref: /openbmc/qemu/hw/intc/arm_gicv3_cpuif.c (revision 30b6852c)
1 /*
2  * ARM Generic Interrupt Controller v3
3  *
4  * Copyright (c) 2016 Linaro Limited
5  * Written by Peter Maydell
6  *
7  * This code is licensed under the GPL, version 2 or (at your option)
8  * any later version.
9  */
10 
11 /* This file contains the code for the system register interface
12  * portions of the GICv3.
13  */
14 
15 #include "qemu/osdep.h"
16 #include "qemu/bitops.h"
17 #include "qemu/log.h"
18 #include "qemu/main-loop.h"
19 #include "trace.h"
20 #include "gicv3_internal.h"
21 #include "hw/irq.h"
22 #include "cpu.h"
23 
24 void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s)
25 {
26     ARMCPU *arm_cpu = ARM_CPU(cpu);
27     CPUARMState *env = &arm_cpu->env;
28 
29     env->gicv3state = (void *)s;
30 };
31 
32 static GICv3CPUState *icc_cs_from_env(CPUARMState *env)
33 {
34     return env->gicv3state;
35 }
36 
37 static bool gicv3_use_ns_bank(CPUARMState *env)
38 {
39     /* Return true if we should use the NonSecure bank for a banked GIC
40      * CPU interface register. Note that this differs from the
41      * access_secure_reg() function because GICv3 banked registers are
42      * banked even for AArch64, unlike the other CPU system registers.
43      */
44     return !arm_is_secure_below_el3(env);
45 }
46 
47 /* The minimum BPR for the virtual interface is a configurable property */
48 static inline int icv_min_vbpr(GICv3CPUState *cs)
49 {
50     return 7 - cs->vprebits;
51 }
52 
53 /* Simple accessor functions for LR fields */
54 static uint32_t ich_lr_vintid(uint64_t lr)
55 {
56     return extract64(lr, ICH_LR_EL2_VINTID_SHIFT, ICH_LR_EL2_VINTID_LENGTH);
57 }
58 
59 static uint32_t ich_lr_pintid(uint64_t lr)
60 {
61     return extract64(lr, ICH_LR_EL2_PINTID_SHIFT, ICH_LR_EL2_PINTID_LENGTH);
62 }
63 
64 static uint32_t ich_lr_prio(uint64_t lr)
65 {
66     return extract64(lr, ICH_LR_EL2_PRIORITY_SHIFT, ICH_LR_EL2_PRIORITY_LENGTH);
67 }
68 
69 static int ich_lr_state(uint64_t lr)
70 {
71     return extract64(lr, ICH_LR_EL2_STATE_SHIFT, ICH_LR_EL2_STATE_LENGTH);
72 }
73 
74 static bool icv_access(CPUARMState *env, int hcr_flags)
75 {
76     /* Return true if this ICC_ register access should really be
77      * directed to an ICV_ access. hcr_flags is a mask of
78      * HCR_EL2 bits to check: we treat this as an ICV_ access
79      * if we are in NS EL1 and at least one of the specified
80      * HCR_EL2 bits is set.
81      *
82      * ICV registers fall into four categories:
83      *  * access if NS EL1 and HCR_EL2.FMO == 1:
84      *    all ICV regs with '0' in their name
85      *  * access if NS EL1 and HCR_EL2.IMO == 1:
86      *    all ICV regs with '1' in their name
87      *  * access if NS EL1 and either IMO or FMO == 1:
88      *    CTLR, DIR, PMR, RPR
89      */
90     uint64_t hcr_el2 = arm_hcr_el2_eff(env);
91     bool flagmatch = hcr_el2 & hcr_flags & (HCR_IMO | HCR_FMO);
92 
93     return flagmatch && arm_current_el(env) == 1
94         && !arm_is_secure_below_el3(env);
95 }
96 
97 static int read_vbpr(GICv3CPUState *cs, int grp)
98 {
99     /* Read VBPR value out of the VMCR field (caller must handle
100      * VCBPR effects if required)
101      */
102     if (grp == GICV3_G0) {
103         return extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR0_SHIFT,
104                      ICH_VMCR_EL2_VBPR0_LENGTH);
105     } else {
106         return extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR1_SHIFT,
107                          ICH_VMCR_EL2_VBPR1_LENGTH);
108     }
109 }
110 
111 static void write_vbpr(GICv3CPUState *cs, int grp, int value)
112 {
113     /* Write new VBPR1 value, handling the "writing a value less than
114      * the minimum sets it to the minimum" semantics.
115      */
116     int min = icv_min_vbpr(cs);
117 
118     if (grp != GICV3_G0) {
119         min++;
120     }
121 
122     value = MAX(value, min);
123 
124     if (grp == GICV3_G0) {
125         cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR0_SHIFT,
126                                      ICH_VMCR_EL2_VBPR0_LENGTH, value);
127     } else {
128         cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR1_SHIFT,
129                                      ICH_VMCR_EL2_VBPR1_LENGTH, value);
130     }
131 }
132 
133 static uint32_t icv_fullprio_mask(GICv3CPUState *cs)
134 {
135     /* Return a mask word which clears the unimplemented priority bits
136      * from a priority value for a virtual interrupt. (Not to be confused
137      * with the group priority, whose mask depends on the value of VBPR
138      * for the interrupt group.)
139      */
140     return ~0U << (8 - cs->vpribits);
141 }
142 
143 static int ich_highest_active_virt_prio(GICv3CPUState *cs)
144 {
145     /* Calculate the current running priority based on the set bits
146      * in the ICH Active Priority Registers.
147      */
148     int i;
149     int aprmax = 1 << (cs->vprebits - 5);
150 
151     assert(aprmax <= ARRAY_SIZE(cs->ich_apr[0]));
152 
153     for (i = 0; i < aprmax; i++) {
154         uint32_t apr = cs->ich_apr[GICV3_G0][i] |
155             cs->ich_apr[GICV3_G1NS][i];
156 
157         if (!apr) {
158             continue;
159         }
160         return (i * 32 + ctz32(apr)) << (icv_min_vbpr(cs) + 1);
161     }
162     /* No current active interrupts: return idle priority */
163     return 0xff;
164 }
165 
166 static int hppvi_index(GICv3CPUState *cs)
167 {
168     /* Return the list register index of the highest priority pending
169      * virtual interrupt, as per the HighestPriorityVirtualInterrupt
170      * pseudocode. If no pending virtual interrupts, return -1.
171      */
172     int idx = -1;
173     int i;
174     /* Note that a list register entry with a priority of 0xff will
175      * never be reported by this function; this is the architecturally
176      * correct behaviour.
177      */
178     int prio = 0xff;
179 
180     if (!(cs->ich_vmcr_el2 & (ICH_VMCR_EL2_VENG0 | ICH_VMCR_EL2_VENG1))) {
181         /* Both groups disabled, definitely nothing to do */
182         return idx;
183     }
184 
185     for (i = 0; i < cs->num_list_regs; i++) {
186         uint64_t lr = cs->ich_lr_el2[i];
187         int thisprio;
188 
189         if (ich_lr_state(lr) != ICH_LR_EL2_STATE_PENDING) {
190             /* Not Pending */
191             continue;
192         }
193 
194         /* Ignore interrupts if relevant group enable not set */
195         if (lr & ICH_LR_EL2_GROUP) {
196             if (!(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
197                 continue;
198             }
199         } else {
200             if (!(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG0)) {
201                 continue;
202             }
203         }
204 
205         thisprio = ich_lr_prio(lr);
206 
207         if (thisprio < prio) {
208             prio = thisprio;
209             idx = i;
210         }
211     }
212 
213     return idx;
214 }
215 
216 static uint32_t icv_gprio_mask(GICv3CPUState *cs, int group)
217 {
218     /* Return a mask word which clears the subpriority bits from
219      * a priority value for a virtual interrupt in the specified group.
220      * This depends on the VBPR value.
221      * If using VBPR0 then:
222      *  a BPR of 0 means the group priority bits are [7:1];
223      *  a BPR of 1 means they are [7:2], and so on down to
224      *  a BPR of 7 meaning no group priority bits at all.
225      * If using VBPR1 then:
226      *  a BPR of 0 is impossible (the minimum value is 1)
227      *  a BPR of 1 means the group priority bits are [7:1];
228      *  a BPR of 2 means they are [7:2], and so on down to
229      *  a BPR of 7 meaning the group priority is [7].
230      *
231      * Which BPR to use depends on the group of the interrupt and
232      * the current ICH_VMCR_EL2.VCBPR settings.
233      *
234      * This corresponds to the VGroupBits() pseudocode.
235      */
236     int bpr;
237 
238     if (group == GICV3_G1NS && cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR) {
239         group = GICV3_G0;
240     }
241 
242     bpr = read_vbpr(cs, group);
243     if (group == GICV3_G1NS) {
244         assert(bpr > 0);
245         bpr--;
246     }
247 
248     return ~0U << (bpr + 1);
249 }
250 
251 static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr)
252 {
253     /* Return true if we can signal this virtual interrupt defined by
254      * the given list register value; see the pseudocode functions
255      * CanSignalVirtualInterrupt and CanSignalVirtualInt.
256      * Compare also icc_hppi_can_preempt() which is the non-virtual
257      * equivalent of these checks.
258      */
259     int grp;
260     uint32_t mask, prio, rprio, vpmr;
261 
262     if (!(cs->ich_hcr_el2 & ICH_HCR_EL2_EN)) {
263         /* Virtual interface disabled */
264         return false;
265     }
266 
267     /* We don't need to check that this LR is in Pending state because
268      * that has already been done in hppvi_index().
269      */
270 
271     prio = ich_lr_prio(lr);
272     vpmr = extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT,
273                      ICH_VMCR_EL2_VPMR_LENGTH);
274 
275     if (prio >= vpmr) {
276         /* Priority mask masks this interrupt */
277         return false;
278     }
279 
280     rprio = ich_highest_active_virt_prio(cs);
281     if (rprio == 0xff) {
282         /* No running interrupt so we can preempt */
283         return true;
284     }
285 
286     grp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
287 
288     mask = icv_gprio_mask(cs, grp);
289 
290     /* We only preempt a running interrupt if the pending interrupt's
291      * group priority is sufficient (the subpriorities are not considered).
292      */
293     if ((prio & mask) < (rprio & mask)) {
294         return true;
295     }
296 
297     return false;
298 }
299 
300 static uint32_t eoi_maintenance_interrupt_state(GICv3CPUState *cs,
301                                                 uint32_t *misr)
302 {
303     /* Return a set of bits indicating the EOI maintenance interrupt status
304      * for each list register. The EOI maintenance interrupt status is
305      * 1 if LR.State == 0 && LR.HW == 0 && LR.EOI == 1
306      * (see the GICv3 spec for the ICH_EISR_EL2 register).
307      * If misr is not NULL then we should also collect the information
308      * about the MISR.EOI, MISR.NP and MISR.U bits.
309      */
310     uint32_t value = 0;
311     int validcount = 0;
312     bool seenpending = false;
313     int i;
314 
315     for (i = 0; i < cs->num_list_regs; i++) {
316         uint64_t lr = cs->ich_lr_el2[i];
317 
318         if ((lr & (ICH_LR_EL2_STATE_MASK | ICH_LR_EL2_HW | ICH_LR_EL2_EOI))
319             == ICH_LR_EL2_EOI) {
320             value |= (1 << i);
321         }
322         if ((lr & ICH_LR_EL2_STATE_MASK)) {
323             validcount++;
324         }
325         if (ich_lr_state(lr) == ICH_LR_EL2_STATE_PENDING) {
326             seenpending = true;
327         }
328     }
329 
330     if (misr) {
331         if (validcount < 2 && (cs->ich_hcr_el2 & ICH_HCR_EL2_UIE)) {
332             *misr |= ICH_MISR_EL2_U;
333         }
334         if (!seenpending && (cs->ich_hcr_el2 & ICH_HCR_EL2_NPIE)) {
335             *misr |= ICH_MISR_EL2_NP;
336         }
337         if (value) {
338             *misr |= ICH_MISR_EL2_EOI;
339         }
340     }
341     return value;
342 }
343 
344 static uint32_t maintenance_interrupt_state(GICv3CPUState *cs)
345 {
346     /* Return a set of bits indicating the maintenance interrupt status
347      * (as seen in the ICH_MISR_EL2 register).
348      */
349     uint32_t value = 0;
350 
351     /* Scan list registers and fill in the U, NP and EOI bits */
352     eoi_maintenance_interrupt_state(cs, &value);
353 
354     if (cs->ich_hcr_el2 & (ICH_HCR_EL2_LRENPIE | ICH_HCR_EL2_EOICOUNT_MASK)) {
355         value |= ICH_MISR_EL2_LRENP;
356     }
357 
358     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP0EIE) &&
359         (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG0)) {
360         value |= ICH_MISR_EL2_VGRP0E;
361     }
362 
363     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP0DIE) &&
364         !(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
365         value |= ICH_MISR_EL2_VGRP0D;
366     }
367     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP1EIE) &&
368         (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
369         value |= ICH_MISR_EL2_VGRP1E;
370     }
371 
372     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP1DIE) &&
373         !(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
374         value |= ICH_MISR_EL2_VGRP1D;
375     }
376 
377     return value;
378 }
379 
380 static void gicv3_cpuif_virt_update(GICv3CPUState *cs)
381 {
382     /* Tell the CPU about any pending virtual interrupts or
383      * maintenance interrupts, following a change to the state
384      * of the CPU interface relevant to virtual interrupts.
385      *
386      * CAUTION: this function will call qemu_set_irq() on the
387      * CPU maintenance IRQ line, which is typically wired up
388      * to the GIC as a per-CPU interrupt. This means that it
389      * will recursively call back into the GIC code via
390      * gicv3_redist_set_irq() and thus into the CPU interface code's
391      * gicv3_cpuif_update(). It is therefore important that this
392      * function is only called as the final action of a CPU interface
393      * register write implementation, after all the GIC state
394      * fields have been updated. gicv3_cpuif_update() also must
395      * not cause this function to be called, but that happens
396      * naturally as a result of there being no architectural
397      * linkage between the physical and virtual GIC logic.
398      */
399     int idx;
400     int irqlevel = 0;
401     int fiqlevel = 0;
402     int maintlevel = 0;
403     ARMCPU *cpu = ARM_CPU(cs->cpu);
404 
405     idx = hppvi_index(cs);
406     trace_gicv3_cpuif_virt_update(gicv3_redist_affid(cs), idx);
407     if (idx >= 0) {
408         uint64_t lr = cs->ich_lr_el2[idx];
409 
410         if (icv_hppi_can_preempt(cs, lr)) {
411             /* Virtual interrupts are simple: G0 are always FIQ, and G1 IRQ */
412             if (lr & ICH_LR_EL2_GROUP) {
413                 irqlevel = 1;
414             } else {
415                 fiqlevel = 1;
416             }
417         }
418     }
419 
420     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_EN) &&
421         maintenance_interrupt_state(cs) != 0) {
422         maintlevel = 1;
423     }
424 
425     trace_gicv3_cpuif_virt_set_irqs(gicv3_redist_affid(cs), fiqlevel,
426                                     irqlevel, maintlevel);
427 
428     qemu_set_irq(cs->parent_vfiq, fiqlevel);
429     qemu_set_irq(cs->parent_virq, irqlevel);
430     qemu_set_irq(cpu->gicv3_maintenance_interrupt, maintlevel);
431 }
432 
433 static uint64_t icv_ap_read(CPUARMState *env, const ARMCPRegInfo *ri)
434 {
435     GICv3CPUState *cs = icc_cs_from_env(env);
436     int regno = ri->opc2 & 3;
437     int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
438     uint64_t value = cs->ich_apr[grp][regno];
439 
440     trace_gicv3_icv_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
441     return value;
442 }
443 
444 static void icv_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
445                          uint64_t value)
446 {
447     GICv3CPUState *cs = icc_cs_from_env(env);
448     int regno = ri->opc2 & 3;
449     int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
450 
451     trace_gicv3_icv_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
452 
453     cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU;
454 
455     gicv3_cpuif_virt_update(cs);
456     return;
457 }
458 
459 static uint64_t icv_bpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
460 {
461     GICv3CPUState *cs = icc_cs_from_env(env);
462     int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1NS;
463     uint64_t bpr;
464     bool satinc = false;
465 
466     if (grp == GICV3_G1NS && (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR)) {
467         /* reads return bpr0 + 1 saturated to 7, writes ignored */
468         grp = GICV3_G0;
469         satinc = true;
470     }
471 
472     bpr = read_vbpr(cs, grp);
473 
474     if (satinc) {
475         bpr++;
476         bpr = MIN(bpr, 7);
477     }
478 
479     trace_gicv3_icv_bpr_read(ri->crm == 8 ? 0 : 1, gicv3_redist_affid(cs), bpr);
480 
481     return bpr;
482 }
483 
484 static void icv_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri,
485                           uint64_t value)
486 {
487     GICv3CPUState *cs = icc_cs_from_env(env);
488     int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1NS;
489 
490     trace_gicv3_icv_bpr_write(ri->crm == 8 ? 0 : 1,
491                               gicv3_redist_affid(cs), value);
492 
493     if (grp == GICV3_G1NS && (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR)) {
494         /* reads return bpr0 + 1 saturated to 7, writes ignored */
495         return;
496     }
497 
498     write_vbpr(cs, grp, value);
499 
500     gicv3_cpuif_virt_update(cs);
501 }
502 
503 static uint64_t icv_pmr_read(CPUARMState *env, const ARMCPRegInfo *ri)
504 {
505     GICv3CPUState *cs = icc_cs_from_env(env);
506     uint64_t value;
507 
508     value = extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT,
509                       ICH_VMCR_EL2_VPMR_LENGTH);
510 
511     trace_gicv3_icv_pmr_read(gicv3_redist_affid(cs), value);
512     return value;
513 }
514 
515 static void icv_pmr_write(CPUARMState *env, const ARMCPRegInfo *ri,
516                           uint64_t value)
517 {
518     GICv3CPUState *cs = icc_cs_from_env(env);
519 
520     trace_gicv3_icv_pmr_write(gicv3_redist_affid(cs), value);
521 
522     value &= icv_fullprio_mask(cs);
523 
524     cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT,
525                                  ICH_VMCR_EL2_VPMR_LENGTH, value);
526 
527     gicv3_cpuif_virt_update(cs);
528 }
529 
530 static uint64_t icv_igrpen_read(CPUARMState *env, const ARMCPRegInfo *ri)
531 {
532     GICv3CPUState *cs = icc_cs_from_env(env);
533     int enbit;
534     uint64_t value;
535 
536     enbit = ri->opc2 & 1 ? ICH_VMCR_EL2_VENG1_SHIFT : ICH_VMCR_EL2_VENG0_SHIFT;
537     value = extract64(cs->ich_vmcr_el2, enbit, 1);
538 
539     trace_gicv3_icv_igrpen_read(ri->opc2 & 1 ? 1 : 0,
540                                 gicv3_redist_affid(cs), value);
541     return value;
542 }
543 
544 static void icv_igrpen_write(CPUARMState *env, const ARMCPRegInfo *ri,
545                              uint64_t value)
546 {
547     GICv3CPUState *cs = icc_cs_from_env(env);
548     int enbit;
549 
550     trace_gicv3_icv_igrpen_write(ri->opc2 & 1 ? 1 : 0,
551                                  gicv3_redist_affid(cs), value);
552 
553     enbit = ri->opc2 & 1 ? ICH_VMCR_EL2_VENG1_SHIFT : ICH_VMCR_EL2_VENG0_SHIFT;
554 
555     cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, enbit, 1, value);
556     gicv3_cpuif_virt_update(cs);
557 }
558 
559 static uint64_t icv_ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri)
560 {
561     GICv3CPUState *cs = icc_cs_from_env(env);
562     uint64_t value;
563 
564     /* Note that the fixed fields here (A3V, SEIS, IDbits, PRIbits)
565      * should match the ones reported in ich_vtr_read().
566      */
567     value = ICC_CTLR_EL1_A3V | (1 << ICC_CTLR_EL1_IDBITS_SHIFT) |
568         (7 << ICC_CTLR_EL1_PRIBITS_SHIFT);
569 
570     if (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VEOIM) {
571         value |= ICC_CTLR_EL1_EOIMODE;
572     }
573 
574     if (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR) {
575         value |= ICC_CTLR_EL1_CBPR;
576     }
577 
578     trace_gicv3_icv_ctlr_read(gicv3_redist_affid(cs), value);
579     return value;
580 }
581 
582 static void icv_ctlr_write(CPUARMState *env, const ARMCPRegInfo *ri,
583                                uint64_t value)
584 {
585     GICv3CPUState *cs = icc_cs_from_env(env);
586 
587     trace_gicv3_icv_ctlr_write(gicv3_redist_affid(cs), value);
588 
589     cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VCBPR_SHIFT,
590                                  1, value & ICC_CTLR_EL1_CBPR ? 1 : 0);
591     cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VEOIM_SHIFT,
592                                  1, value & ICC_CTLR_EL1_EOIMODE ? 1 : 0);
593 
594     gicv3_cpuif_virt_update(cs);
595 }
596 
597 static uint64_t icv_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
598 {
599     GICv3CPUState *cs = icc_cs_from_env(env);
600     int prio = ich_highest_active_virt_prio(cs);
601 
602     trace_gicv3_icv_rpr_read(gicv3_redist_affid(cs), prio);
603     return prio;
604 }
605 
606 static uint64_t icv_hppir_read(CPUARMState *env, const ARMCPRegInfo *ri)
607 {
608     GICv3CPUState *cs = icc_cs_from_env(env);
609     int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS;
610     int idx = hppvi_index(cs);
611     uint64_t value = INTID_SPURIOUS;
612 
613     if (idx >= 0) {
614         uint64_t lr = cs->ich_lr_el2[idx];
615         int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
616 
617         if (grp == thisgrp) {
618             value = ich_lr_vintid(lr);
619         }
620     }
621 
622     trace_gicv3_icv_hppir_read(grp, gicv3_redist_affid(cs), value);
623     return value;
624 }
625 
626 static void icv_activate_irq(GICv3CPUState *cs, int idx, int grp)
627 {
628     /* Activate the interrupt in the specified list register
629      * by moving it from Pending to Active state, and update the
630      * Active Priority Registers.
631      */
632     uint32_t mask = icv_gprio_mask(cs, grp);
633     int prio = ich_lr_prio(cs->ich_lr_el2[idx]) & mask;
634     int aprbit = prio >> (8 - cs->vprebits);
635     int regno = aprbit / 32;
636     int regbit = aprbit % 32;
637 
638     cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT;
639     cs->ich_lr_el2[idx] |= ICH_LR_EL2_STATE_ACTIVE_BIT;
640     cs->ich_apr[grp][regno] |= (1 << regbit);
641 }
642 
643 static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri)
644 {
645     GICv3CPUState *cs = icc_cs_from_env(env);
646     int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS;
647     int idx = hppvi_index(cs);
648     uint64_t intid = INTID_SPURIOUS;
649 
650     if (idx >= 0) {
651         uint64_t lr = cs->ich_lr_el2[idx];
652         int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
653 
654         if (thisgrp == grp && icv_hppi_can_preempt(cs, lr)) {
655             intid = ich_lr_vintid(lr);
656             if (intid < INTID_SECURE) {
657                 icv_activate_irq(cs, idx, grp);
658             } else {
659                 /* Interrupt goes from Pending to Invalid */
660                 cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT;
661                 /* We will now return the (bogus) ID from the list register,
662                  * as per the pseudocode.
663                  */
664             }
665         }
666     }
667 
668     trace_gicv3_icv_iar_read(ri->crm == 8 ? 0 : 1,
669                              gicv3_redist_affid(cs), intid);
670 
671     gicv3_cpuif_virt_update(cs);
672 
673     return intid;
674 }
675 
676 static int icc_highest_active_prio(GICv3CPUState *cs)
677 {
678     /* Calculate the current running priority based on the set bits
679      * in the Active Priority Registers.
680      */
681     int i;
682 
683     for (i = 0; i < ARRAY_SIZE(cs->icc_apr[0]); i++) {
684         uint32_t apr = cs->icc_apr[GICV3_G0][i] |
685             cs->icc_apr[GICV3_G1][i] | cs->icc_apr[GICV3_G1NS][i];
686 
687         if (!apr) {
688             continue;
689         }
690         return (i * 32 + ctz32(apr)) << (GIC_MIN_BPR + 1);
691     }
692     /* No current active interrupts: return idle priority */
693     return 0xff;
694 }
695 
696 static uint32_t icc_gprio_mask(GICv3CPUState *cs, int group)
697 {
698     /* Return a mask word which clears the subpriority bits from
699      * a priority value for an interrupt in the specified group.
700      * This depends on the BPR value. For CBPR0 (S or NS):
701      *  a BPR of 0 means the group priority bits are [7:1];
702      *  a BPR of 1 means they are [7:2], and so on down to
703      *  a BPR of 7 meaning no group priority bits at all.
704      * For CBPR1 NS:
705      *  a BPR of 0 is impossible (the minimum value is 1)
706      *  a BPR of 1 means the group priority bits are [7:1];
707      *  a BPR of 2 means they are [7:2], and so on down to
708      *  a BPR of 7 meaning the group priority is [7].
709      *
710      * Which BPR to use depends on the group of the interrupt and
711      * the current ICC_CTLR.CBPR settings.
712      *
713      * This corresponds to the GroupBits() pseudocode.
714      */
715     int bpr;
716 
717     if ((group == GICV3_G1 && cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR) ||
718         (group == GICV3_G1NS &&
719          cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) {
720         group = GICV3_G0;
721     }
722 
723     bpr = cs->icc_bpr[group] & 7;
724 
725     if (group == GICV3_G1NS) {
726         assert(bpr > 0);
727         bpr--;
728     }
729 
730     return ~0U << (bpr + 1);
731 }
732 
733 static bool icc_no_enabled_hppi(GICv3CPUState *cs)
734 {
735     /* Return true if there is no pending interrupt, or the
736      * highest priority pending interrupt is in a group which has been
737      * disabled at the CPU interface by the ICC_IGRPEN* register enable bits.
738      */
739     return cs->hppi.prio == 0xff || (cs->icc_igrpen[cs->hppi.grp] == 0);
740 }
741 
742 static bool icc_hppi_can_preempt(GICv3CPUState *cs)
743 {
744     /* Return true if we have a pending interrupt of sufficient
745      * priority to preempt.
746      */
747     int rprio;
748     uint32_t mask;
749 
750     if (icc_no_enabled_hppi(cs)) {
751         return false;
752     }
753 
754     if (cs->hppi.prio >= cs->icc_pmr_el1) {
755         /* Priority mask masks this interrupt */
756         return false;
757     }
758 
759     rprio = icc_highest_active_prio(cs);
760     if (rprio == 0xff) {
761         /* No currently running interrupt so we can preempt */
762         return true;
763     }
764 
765     mask = icc_gprio_mask(cs, cs->hppi.grp);
766 
767     /* We only preempt a running interrupt if the pending interrupt's
768      * group priority is sufficient (the subpriorities are not considered).
769      */
770     if ((cs->hppi.prio & mask) < (rprio & mask)) {
771         return true;
772     }
773 
774     return false;
775 }
776 
777 void gicv3_cpuif_update(GICv3CPUState *cs)
778 {
779     /* Tell the CPU about its highest priority pending interrupt */
780     int irqlevel = 0;
781     int fiqlevel = 0;
782     ARMCPU *cpu = ARM_CPU(cs->cpu);
783     CPUARMState *env = &cpu->env;
784 
785     g_assert(qemu_mutex_iothread_locked());
786 
787     trace_gicv3_cpuif_update(gicv3_redist_affid(cs), cs->hppi.irq,
788                              cs->hppi.grp, cs->hppi.prio);
789 
790     if (cs->hppi.grp == GICV3_G1 && !arm_feature(env, ARM_FEATURE_EL3)) {
791         /* If a Security-enabled GIC sends a G1S interrupt to a
792          * Security-disabled CPU, we must treat it as if it were G0.
793          */
794         cs->hppi.grp = GICV3_G0;
795     }
796 
797     if (icc_hppi_can_preempt(cs)) {
798         /* We have an interrupt: should we signal it as IRQ or FIQ?
799          * This is described in the GICv3 spec section 4.6.2.
800          */
801         bool isfiq;
802 
803         switch (cs->hppi.grp) {
804         case GICV3_G0:
805             isfiq = true;
806             break;
807         case GICV3_G1:
808             isfiq = (!arm_is_secure(env) ||
809                      (arm_current_el(env) == 3 && arm_el_is_aa64(env, 3)));
810             break;
811         case GICV3_G1NS:
812             isfiq = arm_is_secure(env);
813             break;
814         default:
815             g_assert_not_reached();
816         }
817 
818         if (isfiq) {
819             fiqlevel = 1;
820         } else {
821             irqlevel = 1;
822         }
823     }
824 
825     trace_gicv3_cpuif_set_irqs(gicv3_redist_affid(cs), fiqlevel, irqlevel);
826 
827     qemu_set_irq(cs->parent_fiq, fiqlevel);
828     qemu_set_irq(cs->parent_irq, irqlevel);
829 }
830 
831 static uint64_t icc_pmr_read(CPUARMState *env, const ARMCPRegInfo *ri)
832 {
833     GICv3CPUState *cs = icc_cs_from_env(env);
834     uint32_t value = cs->icc_pmr_el1;
835 
836     if (icv_access(env, HCR_FMO | HCR_IMO)) {
837         return icv_pmr_read(env, ri);
838     }
839 
840     if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env) &&
841         (env->cp15.scr_el3 & SCR_FIQ)) {
842         /* NS access and Group 0 is inaccessible to NS: return the
843          * NS view of the current priority
844          */
845         if ((value & 0x80) == 0) {
846             /* Secure priorities not visible to NS */
847             value = 0;
848         } else if (value != 0xff) {
849             value = (value << 1) & 0xff;
850         }
851     }
852 
853     trace_gicv3_icc_pmr_read(gicv3_redist_affid(cs), value);
854 
855     return value;
856 }
857 
858 static void icc_pmr_write(CPUARMState *env, const ARMCPRegInfo *ri,
859                           uint64_t value)
860 {
861     GICv3CPUState *cs = icc_cs_from_env(env);
862 
863     if (icv_access(env, HCR_FMO | HCR_IMO)) {
864         return icv_pmr_write(env, ri, value);
865     }
866 
867     trace_gicv3_icc_pmr_write(gicv3_redist_affid(cs), value);
868 
869     value &= 0xff;
870 
871     if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env) &&
872         (env->cp15.scr_el3 & SCR_FIQ)) {
873         /* NS access and Group 0 is inaccessible to NS: return the
874          * NS view of the current priority
875          */
876         if (!(cs->icc_pmr_el1 & 0x80)) {
877             /* Current PMR in the secure range, don't allow NS to change it */
878             return;
879         }
880         value = (value >> 1) | 0x80;
881     }
882     cs->icc_pmr_el1 = value;
883     gicv3_cpuif_update(cs);
884 }
885 
886 static void icc_activate_irq(GICv3CPUState *cs, int irq)
887 {
888     /* Move the interrupt from the Pending state to Active, and update
889      * the Active Priority Registers
890      */
891     uint32_t mask = icc_gprio_mask(cs, cs->hppi.grp);
892     int prio = cs->hppi.prio & mask;
893     int aprbit = prio >> 1;
894     int regno = aprbit / 32;
895     int regbit = aprbit % 32;
896 
897     cs->icc_apr[cs->hppi.grp][regno] |= (1 << regbit);
898 
899     if (irq < GIC_INTERNAL) {
900         cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1);
901         cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 0);
902         gicv3_redist_update(cs);
903     } else if (irq < GICV3_LPI_INTID_START) {
904         gicv3_gicd_active_set(cs->gic, irq);
905         gicv3_gicd_pending_clear(cs->gic, irq);
906         gicv3_update(cs->gic, irq, 1);
907     } else {
908         gicv3_redist_lpi_pending(cs, irq, 0);
909     }
910 }
911 
912 static uint64_t icc_hppir0_value(GICv3CPUState *cs, CPUARMState *env)
913 {
914     /* Return the highest priority pending interrupt register value
915      * for group 0.
916      */
917     bool irq_is_secure;
918 
919     if (cs->hppi.prio == 0xff) {
920         return INTID_SPURIOUS;
921     }
922 
923     /* Check whether we can return the interrupt or if we should return
924      * a special identifier, as per the CheckGroup0ForSpecialIdentifiers
925      * pseudocode. (We can simplify a little because for us ICC_SRE_EL1.RM
926      * is always zero.)
927      */
928     irq_is_secure = (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) &&
929                      (cs->hppi.grp != GICV3_G1NS));
930 
931     if (cs->hppi.grp != GICV3_G0 && !arm_is_el3_or_mon(env)) {
932         return INTID_SPURIOUS;
933     }
934     if (irq_is_secure && !arm_is_secure(env)) {
935         /* Secure interrupts not visible to Nonsecure */
936         return INTID_SPURIOUS;
937     }
938 
939     if (cs->hppi.grp != GICV3_G0) {
940         /* Indicate to EL3 that there's a Group 1 interrupt for the other
941          * state pending.
942          */
943         return irq_is_secure ? INTID_SECURE : INTID_NONSECURE;
944     }
945 
946     return cs->hppi.irq;
947 }
948 
949 static uint64_t icc_hppir1_value(GICv3CPUState *cs, CPUARMState *env)
950 {
951     /* Return the highest priority pending interrupt register value
952      * for group 1.
953      */
954     bool irq_is_secure;
955 
956     if (cs->hppi.prio == 0xff) {
957         return INTID_SPURIOUS;
958     }
959 
960     /* Check whether we can return the interrupt or if we should return
961      * a special identifier, as per the CheckGroup1ForSpecialIdentifiers
962      * pseudocode. (We can simplify a little because for us ICC_SRE_EL1.RM
963      * is always zero.)
964      */
965     irq_is_secure = (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) &&
966                      (cs->hppi.grp != GICV3_G1NS));
967 
968     if (cs->hppi.grp == GICV3_G0) {
969         /* Group 0 interrupts not visible via HPPIR1 */
970         return INTID_SPURIOUS;
971     }
972     if (irq_is_secure) {
973         if (!arm_is_secure(env)) {
974             /* Secure interrupts not visible in Non-secure */
975             return INTID_SPURIOUS;
976         }
977     } else if (!arm_is_el3_or_mon(env) && arm_is_secure(env)) {
978         /* Group 1 non-secure interrupts not visible in Secure EL1 */
979         return INTID_SPURIOUS;
980     }
981 
982     return cs->hppi.irq;
983 }
984 
985 static uint64_t icc_iar0_read(CPUARMState *env, const ARMCPRegInfo *ri)
986 {
987     GICv3CPUState *cs = icc_cs_from_env(env);
988     uint64_t intid;
989 
990     if (icv_access(env, HCR_FMO)) {
991         return icv_iar_read(env, ri);
992     }
993 
994     if (!icc_hppi_can_preempt(cs)) {
995         intid = INTID_SPURIOUS;
996     } else {
997         intid = icc_hppir0_value(cs, env);
998     }
999 
1000     if (!(intid >= INTID_SECURE && intid <= INTID_SPURIOUS)) {
1001         icc_activate_irq(cs, intid);
1002     }
1003 
1004     trace_gicv3_icc_iar0_read(gicv3_redist_affid(cs), intid);
1005     return intid;
1006 }
1007 
1008 static uint64_t icc_iar1_read(CPUARMState *env, const ARMCPRegInfo *ri)
1009 {
1010     GICv3CPUState *cs = icc_cs_from_env(env);
1011     uint64_t intid;
1012 
1013     if (icv_access(env, HCR_IMO)) {
1014         return icv_iar_read(env, ri);
1015     }
1016 
1017     if (!icc_hppi_can_preempt(cs)) {
1018         intid = INTID_SPURIOUS;
1019     } else {
1020         intid = icc_hppir1_value(cs, env);
1021     }
1022 
1023     if (!(intid >= INTID_SECURE && intid <= INTID_SPURIOUS)) {
1024         icc_activate_irq(cs, intid);
1025     }
1026 
1027     trace_gicv3_icc_iar1_read(gicv3_redist_affid(cs), intid);
1028     return intid;
1029 }
1030 
1031 static void icc_drop_prio(GICv3CPUState *cs, int grp)
1032 {
1033     /* Drop the priority of the currently active interrupt in
1034      * the specified group.
1035      *
1036      * Note that we can guarantee (because of the requirement to nest
1037      * ICC_IAR reads [which activate an interrupt and raise priority]
1038      * with ICC_EOIR writes [which drop the priority for the interrupt])
1039      * that the interrupt we're being called for is the highest priority
1040      * active interrupt, meaning that it has the lowest set bit in the
1041      * APR registers.
1042      *
1043      * If the guest does not honour the ordering constraints then the
1044      * behaviour of the GIC is UNPREDICTABLE, which for us means that
1045      * the values of the APR registers might become incorrect and the
1046      * running priority will be wrong, so interrupts that should preempt
1047      * might not do so, and interrupts that should not preempt might do so.
1048      */
1049     int i;
1050 
1051     for (i = 0; i < ARRAY_SIZE(cs->icc_apr[grp]); i++) {
1052         uint64_t *papr = &cs->icc_apr[grp][i];
1053 
1054         if (!*papr) {
1055             continue;
1056         }
1057         /* Clear the lowest set bit */
1058         *papr &= *papr - 1;
1059         break;
1060     }
1061 
1062     /* running priority change means we need an update for this cpu i/f */
1063     gicv3_cpuif_update(cs);
1064 }
1065 
1066 static bool icc_eoi_split(CPUARMState *env, GICv3CPUState *cs)
1067 {
1068     /* Return true if we should split priority drop and interrupt
1069      * deactivation, ie whether the relevant EOIMode bit is set.
1070      */
1071     if (arm_is_el3_or_mon(env)) {
1072         return cs->icc_ctlr_el3 & ICC_CTLR_EL3_EOIMODE_EL3;
1073     }
1074     if (arm_is_secure_below_el3(env)) {
1075         return cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_EOIMODE;
1076     } else {
1077         return cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_EOIMODE;
1078     }
1079 }
1080 
1081 static int icc_highest_active_group(GICv3CPUState *cs)
1082 {
1083     /* Return the group with the highest priority active interrupt.
1084      * We can do this by just comparing the APRs to see which one
1085      * has the lowest set bit.
1086      * (If more than one group is active at the same priority then
1087      * we're in UNPREDICTABLE territory.)
1088      */
1089     int i;
1090 
1091     for (i = 0; i < ARRAY_SIZE(cs->icc_apr[0]); i++) {
1092         int g0ctz = ctz32(cs->icc_apr[GICV3_G0][i]);
1093         int g1ctz = ctz32(cs->icc_apr[GICV3_G1][i]);
1094         int g1nsctz = ctz32(cs->icc_apr[GICV3_G1NS][i]);
1095 
1096         if (g1nsctz < g0ctz && g1nsctz < g1ctz) {
1097             return GICV3_G1NS;
1098         }
1099         if (g1ctz < g0ctz) {
1100             return GICV3_G1;
1101         }
1102         if (g0ctz < 32) {
1103             return GICV3_G0;
1104         }
1105     }
1106     /* No set active bits? UNPREDICTABLE; return -1 so the caller
1107      * ignores the spurious EOI attempt.
1108      */
1109     return -1;
1110 }
1111 
1112 static void icc_deactivate_irq(GICv3CPUState *cs, int irq)
1113 {
1114     if (irq < GIC_INTERNAL) {
1115         cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 0);
1116         gicv3_redist_update(cs);
1117     } else {
1118         gicv3_gicd_active_clear(cs->gic, irq);
1119         gicv3_update(cs->gic, irq, 1);
1120     }
1121 }
1122 
1123 static bool icv_eoi_split(CPUARMState *env, GICv3CPUState *cs)
1124 {
1125     /* Return true if we should split priority drop and interrupt
1126      * deactivation, ie whether the virtual EOIMode bit is set.
1127      */
1128     return cs->ich_vmcr_el2 & ICH_VMCR_EL2_VEOIM;
1129 }
1130 
1131 static int icv_find_active(GICv3CPUState *cs, int irq)
1132 {
1133     /* Given an interrupt number for an active interrupt, return the index
1134      * of the corresponding list register, or -1 if there is no match.
1135      * Corresponds to FindActiveVirtualInterrupt pseudocode.
1136      */
1137     int i;
1138 
1139     for (i = 0; i < cs->num_list_regs; i++) {
1140         uint64_t lr = cs->ich_lr_el2[i];
1141 
1142         if ((lr & ICH_LR_EL2_STATE_ACTIVE_BIT) && ich_lr_vintid(lr) == irq) {
1143             return i;
1144         }
1145     }
1146 
1147     return -1;
1148 }
1149 
1150 static void icv_deactivate_irq(GICv3CPUState *cs, int idx)
1151 {
1152     /* Deactivate the interrupt in the specified list register index */
1153     uint64_t lr = cs->ich_lr_el2[idx];
1154 
1155     if (lr & ICH_LR_EL2_HW) {
1156         /* Deactivate the associated physical interrupt */
1157         int pirq = ich_lr_pintid(lr);
1158 
1159         if (pirq < INTID_SECURE) {
1160             icc_deactivate_irq(cs, pirq);
1161         }
1162     }
1163 
1164     /* Clear the 'active' part of the state, so ActivePending->Pending
1165      * and Active->Invalid.
1166      */
1167     lr &= ~ICH_LR_EL2_STATE_ACTIVE_BIT;
1168     cs->ich_lr_el2[idx] = lr;
1169 }
1170 
1171 static void icv_increment_eoicount(GICv3CPUState *cs)
1172 {
1173     /* Increment the EOICOUNT field in ICH_HCR_EL2 */
1174     int eoicount = extract64(cs->ich_hcr_el2, ICH_HCR_EL2_EOICOUNT_SHIFT,
1175                              ICH_HCR_EL2_EOICOUNT_LENGTH);
1176 
1177     cs->ich_hcr_el2 = deposit64(cs->ich_hcr_el2, ICH_HCR_EL2_EOICOUNT_SHIFT,
1178                                 ICH_HCR_EL2_EOICOUNT_LENGTH, eoicount + 1);
1179 }
1180 
1181 static int icv_drop_prio(GICv3CPUState *cs)
1182 {
1183     /* Drop the priority of the currently active virtual interrupt
1184      * (favouring group 0 if there is a set active bit at
1185      * the same priority for both group 0 and group 1).
1186      * Return the priority value for the bit we just cleared,
1187      * or 0xff if no bits were set in the AP registers at all.
1188      * Note that though the ich_apr[] are uint64_t only the low
1189      * 32 bits are actually relevant.
1190      */
1191     int i;
1192     int aprmax = 1 << (cs->vprebits - 5);
1193 
1194     assert(aprmax <= ARRAY_SIZE(cs->ich_apr[0]));
1195 
1196     for (i = 0; i < aprmax; i++) {
1197         uint64_t *papr0 = &cs->ich_apr[GICV3_G0][i];
1198         uint64_t *papr1 = &cs->ich_apr[GICV3_G1NS][i];
1199         int apr0count, apr1count;
1200 
1201         if (!*papr0 && !*papr1) {
1202             continue;
1203         }
1204 
1205         /* We can't just use the bit-twiddling hack icc_drop_prio() does
1206          * because we need to return the bit number we cleared so
1207          * it can be compared against the list register's priority field.
1208          */
1209         apr0count = ctz32(*papr0);
1210         apr1count = ctz32(*papr1);
1211 
1212         if (apr0count <= apr1count) {
1213             *papr0 &= *papr0 - 1;
1214             return (apr0count + i * 32) << (icv_min_vbpr(cs) + 1);
1215         } else {
1216             *papr1 &= *papr1 - 1;
1217             return (apr1count + i * 32) << (icv_min_vbpr(cs) + 1);
1218         }
1219     }
1220     return 0xff;
1221 }
1222 
1223 static void icv_dir_write(CPUARMState *env, const ARMCPRegInfo *ri,
1224                           uint64_t value)
1225 {
1226     /* Deactivate interrupt */
1227     GICv3CPUState *cs = icc_cs_from_env(env);
1228     int idx;
1229     int irq = value & 0xffffff;
1230 
1231     trace_gicv3_icv_dir_write(gicv3_redist_affid(cs), value);
1232 
1233     if (irq >= GICV3_MAXIRQ) {
1234         /* Also catches special interrupt numbers and LPIs */
1235         return;
1236     }
1237 
1238     if (!icv_eoi_split(env, cs)) {
1239         return;
1240     }
1241 
1242     idx = icv_find_active(cs, irq);
1243 
1244     if (idx < 0) {
1245         /* No list register matching this, so increment the EOI count
1246          * (might trigger a maintenance interrupt)
1247          */
1248         icv_increment_eoicount(cs);
1249     } else {
1250         icv_deactivate_irq(cs, idx);
1251     }
1252 
1253     gicv3_cpuif_virt_update(cs);
1254 }
1255 
1256 static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
1257                            uint64_t value)
1258 {
1259     /* End of Interrupt */
1260     GICv3CPUState *cs = icc_cs_from_env(env);
1261     int irq = value & 0xffffff;
1262     int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS;
1263     int idx, dropprio;
1264 
1265     trace_gicv3_icv_eoir_write(ri->crm == 8 ? 0 : 1,
1266                                gicv3_redist_affid(cs), value);
1267 
1268     if (irq >= GICV3_MAXIRQ) {
1269         /* Also catches special interrupt numbers and LPIs */
1270         return;
1271     }
1272 
1273     /* We implement the IMPDEF choice of "drop priority before doing
1274      * error checks" (because that lets us avoid scanning the AP
1275      * registers twice).
1276      */
1277     dropprio = icv_drop_prio(cs);
1278     if (dropprio == 0xff) {
1279         /* No active interrupt. It is CONSTRAINED UNPREDICTABLE
1280          * whether the list registers are checked in this
1281          * situation; we choose not to.
1282          */
1283         return;
1284     }
1285 
1286     idx = icv_find_active(cs, irq);
1287 
1288     if (idx < 0) {
1289         /* No valid list register corresponding to EOI ID */
1290         icv_increment_eoicount(cs);
1291     } else {
1292         uint64_t lr = cs->ich_lr_el2[idx];
1293         int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
1294         int lr_gprio = ich_lr_prio(lr) & icv_gprio_mask(cs, grp);
1295 
1296         if (thisgrp == grp && lr_gprio == dropprio) {
1297             if (!icv_eoi_split(env, cs)) {
1298                 /* Priority drop and deactivate not split: deactivate irq now */
1299                 icv_deactivate_irq(cs, idx);
1300             }
1301         }
1302     }
1303 
1304     gicv3_cpuif_virt_update(cs);
1305 }
1306 
1307 static void icc_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
1308                            uint64_t value)
1309 {
1310     /* End of Interrupt */
1311     GICv3CPUState *cs = icc_cs_from_env(env);
1312     int irq = value & 0xffffff;
1313     int grp;
1314     bool is_eoir0 = ri->crm == 8;
1315 
1316     if (icv_access(env, is_eoir0 ? HCR_FMO : HCR_IMO)) {
1317         icv_eoir_write(env, ri, value);
1318         return;
1319     }
1320 
1321     trace_gicv3_icc_eoir_write(is_eoir0 ? 0 : 1,
1322                                gicv3_redist_affid(cs), value);
1323 
1324     if ((irq >= cs->gic->num_irq) &&
1325         !(cs->gic->lpi_enable && (irq >= GICV3_LPI_INTID_START))) {
1326         /* This handles two cases:
1327          * 1. If software writes the ID of a spurious interrupt [ie 1020-1023]
1328          * to the GICC_EOIR, the GIC ignores that write.
1329          * 2. If software writes the number of a non-existent interrupt
1330          * this must be a subcase of "value written does not match the last
1331          * valid interrupt value read from the Interrupt Acknowledge
1332          * register" and so this is UNPREDICTABLE. We choose to ignore it.
1333          */
1334         return;
1335     }
1336 
1337     grp = icc_highest_active_group(cs);
1338     switch (grp) {
1339     case GICV3_G0:
1340         if (!is_eoir0) {
1341             return;
1342         }
1343         if (!(cs->gic->gicd_ctlr & GICD_CTLR_DS)
1344             && arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env)) {
1345             return;
1346         }
1347         break;
1348     case GICV3_G1:
1349         if (is_eoir0) {
1350             return;
1351         }
1352         if (!arm_is_secure(env)) {
1353             return;
1354         }
1355         break;
1356     case GICV3_G1NS:
1357         if (is_eoir0) {
1358             return;
1359         }
1360         if (!arm_is_el3_or_mon(env) && arm_is_secure(env)) {
1361             return;
1362         }
1363         break;
1364     default:
1365         qemu_log_mask(LOG_GUEST_ERROR,
1366                       "%s: IRQ %d isn't active\n", __func__, irq);
1367         return;
1368     }
1369 
1370     icc_drop_prio(cs, grp);
1371 
1372     if (!icc_eoi_split(env, cs)) {
1373         /* Priority drop and deactivate not split: deactivate irq now */
1374         icc_deactivate_irq(cs, irq);
1375     }
1376 }
1377 
1378 static uint64_t icc_hppir0_read(CPUARMState *env, const ARMCPRegInfo *ri)
1379 {
1380     GICv3CPUState *cs = icc_cs_from_env(env);
1381     uint64_t value;
1382 
1383     if (icv_access(env, HCR_FMO)) {
1384         return icv_hppir_read(env, ri);
1385     }
1386 
1387     value = icc_hppir0_value(cs, env);
1388     trace_gicv3_icc_hppir0_read(gicv3_redist_affid(cs), value);
1389     return value;
1390 }
1391 
1392 static uint64_t icc_hppir1_read(CPUARMState *env, const ARMCPRegInfo *ri)
1393 {
1394     GICv3CPUState *cs = icc_cs_from_env(env);
1395     uint64_t value;
1396 
1397     if (icv_access(env, HCR_IMO)) {
1398         return icv_hppir_read(env, ri);
1399     }
1400 
1401     value = icc_hppir1_value(cs, env);
1402     trace_gicv3_icc_hppir1_read(gicv3_redist_affid(cs), value);
1403     return value;
1404 }
1405 
1406 static uint64_t icc_bpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
1407 {
1408     GICv3CPUState *cs = icc_cs_from_env(env);
1409     int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1;
1410     bool satinc = false;
1411     uint64_t bpr;
1412 
1413     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1414         return icv_bpr_read(env, ri);
1415     }
1416 
1417     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1418         grp = GICV3_G1NS;
1419     }
1420 
1421     if (grp == GICV3_G1 && !arm_is_el3_or_mon(env) &&
1422         (cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR)) {
1423         /* CBPR_EL1S means secure EL1 or AArch32 EL3 !Mon BPR1 accesses
1424          * modify BPR0
1425          */
1426         grp = GICV3_G0;
1427     }
1428 
1429     if (grp == GICV3_G1NS && arm_current_el(env) < 3 &&
1430         (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) {
1431         /* reads return bpr0 + 1 sat to 7, writes ignored */
1432         grp = GICV3_G0;
1433         satinc = true;
1434     }
1435 
1436     bpr = cs->icc_bpr[grp];
1437     if (satinc) {
1438         bpr++;
1439         bpr = MIN(bpr, 7);
1440     }
1441 
1442     trace_gicv3_icc_bpr_read(ri->crm == 8 ? 0 : 1, gicv3_redist_affid(cs), bpr);
1443 
1444     return bpr;
1445 }
1446 
1447 static void icc_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri,
1448                           uint64_t value)
1449 {
1450     GICv3CPUState *cs = icc_cs_from_env(env);
1451     int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1;
1452     uint64_t minval;
1453 
1454     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1455         icv_bpr_write(env, ri, value);
1456         return;
1457     }
1458 
1459     trace_gicv3_icc_bpr_write(ri->crm == 8 ? 0 : 1,
1460                               gicv3_redist_affid(cs), value);
1461 
1462     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1463         grp = GICV3_G1NS;
1464     }
1465 
1466     if (grp == GICV3_G1 && !arm_is_el3_or_mon(env) &&
1467         (cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR)) {
1468         /* CBPR_EL1S means secure EL1 or AArch32 EL3 !Mon BPR1 accesses
1469          * modify BPR0
1470          */
1471         grp = GICV3_G0;
1472     }
1473 
1474     if (grp == GICV3_G1NS && arm_current_el(env) < 3 &&
1475         (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) {
1476         /* reads return bpr0 + 1 sat to 7, writes ignored */
1477         return;
1478     }
1479 
1480     minval = (grp == GICV3_G1NS) ? GIC_MIN_BPR_NS : GIC_MIN_BPR;
1481     if (value < minval) {
1482         value = minval;
1483     }
1484 
1485     cs->icc_bpr[grp] = value & 7;
1486     gicv3_cpuif_update(cs);
1487 }
1488 
1489 static uint64_t icc_ap_read(CPUARMState *env, const ARMCPRegInfo *ri)
1490 {
1491     GICv3CPUState *cs = icc_cs_from_env(env);
1492     uint64_t value;
1493 
1494     int regno = ri->opc2 & 3;
1495     int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0;
1496 
1497     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1498         return icv_ap_read(env, ri);
1499     }
1500 
1501     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1502         grp = GICV3_G1NS;
1503     }
1504 
1505     value = cs->icc_apr[grp][regno];
1506 
1507     trace_gicv3_icc_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
1508     return value;
1509 }
1510 
1511 static void icc_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
1512                          uint64_t value)
1513 {
1514     GICv3CPUState *cs = icc_cs_from_env(env);
1515 
1516     int regno = ri->opc2 & 3;
1517     int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0;
1518 
1519     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1520         icv_ap_write(env, ri, value);
1521         return;
1522     }
1523 
1524     trace_gicv3_icc_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
1525 
1526     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1527         grp = GICV3_G1NS;
1528     }
1529 
1530     /* It's not possible to claim that a Non-secure interrupt is active
1531      * at a priority outside the Non-secure range (128..255), since this
1532      * would otherwise allow malicious NS code to block delivery of S interrupts
1533      * by writing a bad value to these registers.
1534      */
1535     if (grp == GICV3_G1NS && regno < 2 && arm_feature(env, ARM_FEATURE_EL3)) {
1536         return;
1537     }
1538 
1539     cs->icc_apr[grp][regno] = value & 0xFFFFFFFFU;
1540     gicv3_cpuif_update(cs);
1541 }
1542 
1543 static void icc_dir_write(CPUARMState *env, const ARMCPRegInfo *ri,
1544                           uint64_t value)
1545 {
1546     /* Deactivate interrupt */
1547     GICv3CPUState *cs = icc_cs_from_env(env);
1548     int irq = value & 0xffffff;
1549     bool irq_is_secure, single_sec_state, irq_is_grp0;
1550     bool route_fiq_to_el3, route_irq_to_el3, route_fiq_to_el2, route_irq_to_el2;
1551 
1552     if (icv_access(env, HCR_FMO | HCR_IMO)) {
1553         icv_dir_write(env, ri, value);
1554         return;
1555     }
1556 
1557     trace_gicv3_icc_dir_write(gicv3_redist_affid(cs), value);
1558 
1559     if (irq >= cs->gic->num_irq) {
1560         /* Also catches special interrupt numbers and LPIs */
1561         return;
1562     }
1563 
1564     if (!icc_eoi_split(env, cs)) {
1565         return;
1566     }
1567 
1568     int grp = gicv3_irq_group(cs->gic, cs, irq);
1569 
1570     single_sec_state = cs->gic->gicd_ctlr & GICD_CTLR_DS;
1571     irq_is_secure = !single_sec_state && (grp != GICV3_G1NS);
1572     irq_is_grp0 = grp == GICV3_G0;
1573 
1574     /* Check whether we're allowed to deactivate this interrupt based
1575      * on its group and the current CPU state.
1576      * These checks are laid out to correspond to the spec's pseudocode.
1577      */
1578     route_fiq_to_el3 = env->cp15.scr_el3 & SCR_FIQ;
1579     route_irq_to_el3 = env->cp15.scr_el3 & SCR_IRQ;
1580     /* No need to include !IsSecure in route_*_to_el2 as it's only
1581      * tested in cases where we know !IsSecure is true.
1582      */
1583     uint64_t hcr_el2 = arm_hcr_el2_eff(env);
1584     route_fiq_to_el2 = hcr_el2 & HCR_FMO;
1585     route_irq_to_el2 = hcr_el2 & HCR_IMO;
1586 
1587     switch (arm_current_el(env)) {
1588     case 3:
1589         break;
1590     case 2:
1591         if (single_sec_state && irq_is_grp0 && !route_fiq_to_el3) {
1592             break;
1593         }
1594         if (!irq_is_secure && !irq_is_grp0 && !route_irq_to_el3) {
1595             break;
1596         }
1597         return;
1598     case 1:
1599         if (!arm_is_secure_below_el3(env)) {
1600             if (single_sec_state && irq_is_grp0 &&
1601                 !route_fiq_to_el3 && !route_fiq_to_el2) {
1602                 break;
1603             }
1604             if (!irq_is_secure && !irq_is_grp0 &&
1605                 !route_irq_to_el3 && !route_irq_to_el2) {
1606                 break;
1607             }
1608         } else {
1609             if (irq_is_grp0 && !route_fiq_to_el3) {
1610                 break;
1611             }
1612             if (!irq_is_grp0 &&
1613                 (!irq_is_secure || !single_sec_state) &&
1614                 !route_irq_to_el3) {
1615                 break;
1616             }
1617         }
1618         return;
1619     default:
1620         g_assert_not_reached();
1621     }
1622 
1623     icc_deactivate_irq(cs, irq);
1624 }
1625 
1626 static uint64_t icc_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
1627 {
1628     GICv3CPUState *cs = icc_cs_from_env(env);
1629     int prio;
1630 
1631     if (icv_access(env, HCR_FMO | HCR_IMO)) {
1632         return icv_rpr_read(env, ri);
1633     }
1634 
1635     prio = icc_highest_active_prio(cs);
1636 
1637     if (arm_feature(env, ARM_FEATURE_EL3) &&
1638         !arm_is_secure(env) && (env->cp15.scr_el3 & SCR_FIQ)) {
1639         /* NS GIC access and Group 0 is inaccessible to NS */
1640         if ((prio & 0x80) == 0) {
1641             /* NS mustn't see priorities in the Secure half of the range */
1642             prio = 0;
1643         } else if (prio != 0xff) {
1644             /* Non-idle priority: show the Non-secure view of it */
1645             prio = (prio << 1) & 0xff;
1646         }
1647     }
1648 
1649     trace_gicv3_icc_rpr_read(gicv3_redist_affid(cs), prio);
1650     return prio;
1651 }
1652 
1653 static void icc_generate_sgi(CPUARMState *env, GICv3CPUState *cs,
1654                              uint64_t value, int grp, bool ns)
1655 {
1656     GICv3State *s = cs->gic;
1657 
1658     /* Extract Aff3/Aff2/Aff1 and shift into the bottom 24 bits */
1659     uint64_t aff = extract64(value, 48, 8) << 16 |
1660         extract64(value, 32, 8) << 8 |
1661         extract64(value, 16, 8);
1662     uint32_t targetlist = extract64(value, 0, 16);
1663     uint32_t irq = extract64(value, 24, 4);
1664     bool irm = extract64(value, 40, 1);
1665     int i;
1666 
1667     if (grp == GICV3_G1 && s->gicd_ctlr & GICD_CTLR_DS) {
1668         /* If GICD_CTLR.DS == 1, the Distributor treats Secure Group 1
1669          * interrupts as Group 0 interrupts and must send Secure Group 0
1670          * interrupts to the target CPUs.
1671          */
1672         grp = GICV3_G0;
1673     }
1674 
1675     trace_gicv3_icc_generate_sgi(gicv3_redist_affid(cs), irq, irm,
1676                                  aff, targetlist);
1677 
1678     for (i = 0; i < s->num_cpu; i++) {
1679         GICv3CPUState *ocs = &s->cpu[i];
1680 
1681         if (irm) {
1682             /* IRM == 1 : route to all CPUs except self */
1683             if (cs == ocs) {
1684                 continue;
1685             }
1686         } else {
1687             /* IRM == 0 : route to Aff3.Aff2.Aff1.n for all n in [0..15]
1688              * where the corresponding bit is set in targetlist
1689              */
1690             int aff0;
1691 
1692             if (ocs->gicr_typer >> 40 != aff) {
1693                 continue;
1694             }
1695             aff0 = extract64(ocs->gicr_typer, 32, 8);
1696             if (aff0 > 15 || extract32(targetlist, aff0, 1) == 0) {
1697                 continue;
1698             }
1699         }
1700 
1701         /* The redistributor will check against its own GICR_NSACR as needed */
1702         gicv3_redist_send_sgi(ocs, grp, irq, ns);
1703     }
1704 }
1705 
1706 static void icc_sgi0r_write(CPUARMState *env, const ARMCPRegInfo *ri,
1707                            uint64_t value)
1708 {
1709     /* Generate Secure Group 0 SGI. */
1710     GICv3CPUState *cs = icc_cs_from_env(env);
1711     bool ns = !arm_is_secure(env);
1712 
1713     icc_generate_sgi(env, cs, value, GICV3_G0, ns);
1714 }
1715 
1716 static void icc_sgi1r_write(CPUARMState *env, const ARMCPRegInfo *ri,
1717                            uint64_t value)
1718 {
1719     /* Generate Group 1 SGI for the current Security state */
1720     GICv3CPUState *cs = icc_cs_from_env(env);
1721     int grp;
1722     bool ns = !arm_is_secure(env);
1723 
1724     grp = ns ? GICV3_G1NS : GICV3_G1;
1725     icc_generate_sgi(env, cs, value, grp, ns);
1726 }
1727 
1728 static void icc_asgi1r_write(CPUARMState *env, const ARMCPRegInfo *ri,
1729                              uint64_t value)
1730 {
1731     /* Generate Group 1 SGI for the Security state that is not
1732      * the current state
1733      */
1734     GICv3CPUState *cs = icc_cs_from_env(env);
1735     int grp;
1736     bool ns = !arm_is_secure(env);
1737 
1738     grp = ns ? GICV3_G1 : GICV3_G1NS;
1739     icc_generate_sgi(env, cs, value, grp, ns);
1740 }
1741 
1742 static uint64_t icc_igrpen_read(CPUARMState *env, const ARMCPRegInfo *ri)
1743 {
1744     GICv3CPUState *cs = icc_cs_from_env(env);
1745     int grp = ri->opc2 & 1 ? GICV3_G1 : GICV3_G0;
1746     uint64_t value;
1747 
1748     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1749         return icv_igrpen_read(env, ri);
1750     }
1751 
1752     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1753         grp = GICV3_G1NS;
1754     }
1755 
1756     value = cs->icc_igrpen[grp];
1757     trace_gicv3_icc_igrpen_read(ri->opc2 & 1 ? 1 : 0,
1758                                 gicv3_redist_affid(cs), value);
1759     return value;
1760 }
1761 
1762 static void icc_igrpen_write(CPUARMState *env, const ARMCPRegInfo *ri,
1763                              uint64_t value)
1764 {
1765     GICv3CPUState *cs = icc_cs_from_env(env);
1766     int grp = ri->opc2 & 1 ? GICV3_G1 : GICV3_G0;
1767 
1768     if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
1769         icv_igrpen_write(env, ri, value);
1770         return;
1771     }
1772 
1773     trace_gicv3_icc_igrpen_write(ri->opc2 & 1 ? 1 : 0,
1774                                  gicv3_redist_affid(cs), value);
1775 
1776     if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
1777         grp = GICV3_G1NS;
1778     }
1779 
1780     cs->icc_igrpen[grp] = value & ICC_IGRPEN_ENABLE;
1781     gicv3_cpuif_update(cs);
1782 }
1783 
1784 static uint64_t icc_igrpen1_el3_read(CPUARMState *env, const ARMCPRegInfo *ri)
1785 {
1786     GICv3CPUState *cs = icc_cs_from_env(env);
1787     uint64_t value;
1788 
1789     /* IGRPEN1_EL3 bits 0 and 1 are r/w aliases into IGRPEN1_EL1 NS and S */
1790     value = cs->icc_igrpen[GICV3_G1NS] | (cs->icc_igrpen[GICV3_G1] << 1);
1791     trace_gicv3_icc_igrpen1_el3_read(gicv3_redist_affid(cs), value);
1792     return value;
1793 }
1794 
1795 static void icc_igrpen1_el3_write(CPUARMState *env, const ARMCPRegInfo *ri,
1796                                   uint64_t value)
1797 {
1798     GICv3CPUState *cs = icc_cs_from_env(env);
1799 
1800     trace_gicv3_icc_igrpen1_el3_write(gicv3_redist_affid(cs), value);
1801 
1802     /* IGRPEN1_EL3 bits 0 and 1 are r/w aliases into IGRPEN1_EL1 NS and S */
1803     cs->icc_igrpen[GICV3_G1NS] = extract32(value, 0, 1);
1804     cs->icc_igrpen[GICV3_G1] = extract32(value, 1, 1);
1805     gicv3_cpuif_update(cs);
1806 }
1807 
1808 static uint64_t icc_ctlr_el1_read(CPUARMState *env, const ARMCPRegInfo *ri)
1809 {
1810     GICv3CPUState *cs = icc_cs_from_env(env);
1811     int bank = gicv3_use_ns_bank(env) ? GICV3_NS : GICV3_S;
1812     uint64_t value;
1813 
1814     if (icv_access(env, HCR_FMO | HCR_IMO)) {
1815         return icv_ctlr_read(env, ri);
1816     }
1817 
1818     value = cs->icc_ctlr_el1[bank];
1819     trace_gicv3_icc_ctlr_read(gicv3_redist_affid(cs), value);
1820     return value;
1821 }
1822 
1823 static void icc_ctlr_el1_write(CPUARMState *env, const ARMCPRegInfo *ri,
1824                                uint64_t value)
1825 {
1826     GICv3CPUState *cs = icc_cs_from_env(env);
1827     int bank = gicv3_use_ns_bank(env) ? GICV3_NS : GICV3_S;
1828     uint64_t mask;
1829 
1830     if (icv_access(env, HCR_FMO | HCR_IMO)) {
1831         icv_ctlr_write(env, ri, value);
1832         return;
1833     }
1834 
1835     trace_gicv3_icc_ctlr_write(gicv3_redist_affid(cs), value);
1836 
1837     /* Only CBPR and EOIMODE can be RW;
1838      * for us PMHE is RAZ/WI (we don't implement 1-of-N interrupts or
1839      * the asseciated priority-based routing of them);
1840      * if EL3 is implemented and GICD_CTLR.DS == 0, then PMHE and CBPR are RO.
1841      */
1842     if (arm_feature(env, ARM_FEATURE_EL3) &&
1843         ((cs->gic->gicd_ctlr & GICD_CTLR_DS) == 0)) {
1844         mask = ICC_CTLR_EL1_EOIMODE;
1845     } else {
1846         mask = ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE;
1847     }
1848 
1849     cs->icc_ctlr_el1[bank] &= ~mask;
1850     cs->icc_ctlr_el1[bank] |= (value & mask);
1851     gicv3_cpuif_update(cs);
1852 }
1853 
1854 
1855 static uint64_t icc_ctlr_el3_read(CPUARMState *env, const ARMCPRegInfo *ri)
1856 {
1857     GICv3CPUState *cs = icc_cs_from_env(env);
1858     uint64_t value;
1859 
1860     value = cs->icc_ctlr_el3;
1861     if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_EOIMODE) {
1862         value |= ICC_CTLR_EL3_EOIMODE_EL1NS;
1863     }
1864     if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR) {
1865         value |= ICC_CTLR_EL3_CBPR_EL1NS;
1866     }
1867     if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_EOIMODE) {
1868         value |= ICC_CTLR_EL3_EOIMODE_EL1S;
1869     }
1870     if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR) {
1871         value |= ICC_CTLR_EL3_CBPR_EL1S;
1872     }
1873 
1874     trace_gicv3_icc_ctlr_el3_read(gicv3_redist_affid(cs), value);
1875     return value;
1876 }
1877 
1878 static void icc_ctlr_el3_write(CPUARMState *env, const ARMCPRegInfo *ri,
1879                                uint64_t value)
1880 {
1881     GICv3CPUState *cs = icc_cs_from_env(env);
1882     uint64_t mask;
1883 
1884     trace_gicv3_icc_ctlr_el3_write(gicv3_redist_affid(cs), value);
1885 
1886     /* *_EL1NS and *_EL1S bits are aliases into the ICC_CTLR_EL1 bits. */
1887     cs->icc_ctlr_el1[GICV3_NS] &= ~(ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE);
1888     if (value & ICC_CTLR_EL3_EOIMODE_EL1NS) {
1889         cs->icc_ctlr_el1[GICV3_NS] |= ICC_CTLR_EL1_EOIMODE;
1890     }
1891     if (value & ICC_CTLR_EL3_CBPR_EL1NS) {
1892         cs->icc_ctlr_el1[GICV3_NS] |= ICC_CTLR_EL1_CBPR;
1893     }
1894 
1895     cs->icc_ctlr_el1[GICV3_S] &= ~(ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE);
1896     if (value & ICC_CTLR_EL3_EOIMODE_EL1S) {
1897         cs->icc_ctlr_el1[GICV3_S] |= ICC_CTLR_EL1_EOIMODE;
1898     }
1899     if (value & ICC_CTLR_EL3_CBPR_EL1S) {
1900         cs->icc_ctlr_el1[GICV3_S] |= ICC_CTLR_EL1_CBPR;
1901     }
1902 
1903     /* The only bit stored in icc_ctlr_el3 which is writeable is EOIMODE_EL3: */
1904     mask = ICC_CTLR_EL3_EOIMODE_EL3;
1905 
1906     cs->icc_ctlr_el3 &= ~mask;
1907     cs->icc_ctlr_el3 |= (value & mask);
1908     gicv3_cpuif_update(cs);
1909 }
1910 
1911 static CPAccessResult gicv3_irqfiq_access(CPUARMState *env,
1912                                           const ARMCPRegInfo *ri, bool isread)
1913 {
1914     CPAccessResult r = CP_ACCESS_OK;
1915     GICv3CPUState *cs = icc_cs_from_env(env);
1916     int el = arm_current_el(env);
1917 
1918     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TC) &&
1919         el == 1 && !arm_is_secure_below_el3(env)) {
1920         /* Takes priority over a possible EL3 trap */
1921         return CP_ACCESS_TRAP_EL2;
1922     }
1923 
1924     if ((env->cp15.scr_el3 & (SCR_FIQ | SCR_IRQ)) == (SCR_FIQ | SCR_IRQ)) {
1925         switch (el) {
1926         case 1:
1927             /* Note that arm_hcr_el2_eff takes secure state into account.  */
1928             if ((arm_hcr_el2_eff(env) & (HCR_IMO | HCR_FMO)) == 0) {
1929                 r = CP_ACCESS_TRAP_EL3;
1930             }
1931             break;
1932         case 2:
1933             r = CP_ACCESS_TRAP_EL3;
1934             break;
1935         case 3:
1936             if (!is_a64(env) && !arm_is_el3_or_mon(env)) {
1937                 r = CP_ACCESS_TRAP_EL3;
1938             }
1939             break;
1940         default:
1941             g_assert_not_reached();
1942         }
1943     }
1944 
1945     if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) {
1946         r = CP_ACCESS_TRAP;
1947     }
1948     return r;
1949 }
1950 
1951 static CPAccessResult gicv3_dir_access(CPUARMState *env,
1952                                        const ARMCPRegInfo *ri, bool isread)
1953 {
1954     GICv3CPUState *cs = icc_cs_from_env(env);
1955 
1956     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TDIR) &&
1957         arm_current_el(env) == 1 && !arm_is_secure_below_el3(env)) {
1958         /* Takes priority over a possible EL3 trap */
1959         return CP_ACCESS_TRAP_EL2;
1960     }
1961 
1962     return gicv3_irqfiq_access(env, ri, isread);
1963 }
1964 
1965 static CPAccessResult gicv3_sgi_access(CPUARMState *env,
1966                                        const ARMCPRegInfo *ri, bool isread)
1967 {
1968     if (arm_current_el(env) == 1 &&
1969         (arm_hcr_el2_eff(env) & (HCR_IMO | HCR_FMO)) != 0) {
1970         /* Takes priority over a possible EL3 trap */
1971         return CP_ACCESS_TRAP_EL2;
1972     }
1973 
1974     return gicv3_irqfiq_access(env, ri, isread);
1975 }
1976 
1977 static CPAccessResult gicv3_fiq_access(CPUARMState *env,
1978                                        const ARMCPRegInfo *ri, bool isread)
1979 {
1980     CPAccessResult r = CP_ACCESS_OK;
1981     GICv3CPUState *cs = icc_cs_from_env(env);
1982     int el = arm_current_el(env);
1983 
1984     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TALL0) &&
1985         el == 1 && !arm_is_secure_below_el3(env)) {
1986         /* Takes priority over a possible EL3 trap */
1987         return CP_ACCESS_TRAP_EL2;
1988     }
1989 
1990     if (env->cp15.scr_el3 & SCR_FIQ) {
1991         switch (el) {
1992         case 1:
1993             if ((arm_hcr_el2_eff(env) & HCR_FMO) == 0) {
1994                 r = CP_ACCESS_TRAP_EL3;
1995             }
1996             break;
1997         case 2:
1998             r = CP_ACCESS_TRAP_EL3;
1999             break;
2000         case 3:
2001             if (!is_a64(env) && !arm_is_el3_or_mon(env)) {
2002                 r = CP_ACCESS_TRAP_EL3;
2003             }
2004             break;
2005         default:
2006             g_assert_not_reached();
2007         }
2008     }
2009 
2010     if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) {
2011         r = CP_ACCESS_TRAP;
2012     }
2013     return r;
2014 }
2015 
2016 static CPAccessResult gicv3_irq_access(CPUARMState *env,
2017                                        const ARMCPRegInfo *ri, bool isread)
2018 {
2019     CPAccessResult r = CP_ACCESS_OK;
2020     GICv3CPUState *cs = icc_cs_from_env(env);
2021     int el = arm_current_el(env);
2022 
2023     if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TALL1) &&
2024         el == 1 && !arm_is_secure_below_el3(env)) {
2025         /* Takes priority over a possible EL3 trap */
2026         return CP_ACCESS_TRAP_EL2;
2027     }
2028 
2029     if (env->cp15.scr_el3 & SCR_IRQ) {
2030         switch (el) {
2031         case 1:
2032             if ((arm_hcr_el2_eff(env) & HCR_IMO) == 0) {
2033                 r = CP_ACCESS_TRAP_EL3;
2034             }
2035             break;
2036         case 2:
2037             r = CP_ACCESS_TRAP_EL3;
2038             break;
2039         case 3:
2040             if (!is_a64(env) && !arm_is_el3_or_mon(env)) {
2041                 r = CP_ACCESS_TRAP_EL3;
2042             }
2043             break;
2044         default:
2045             g_assert_not_reached();
2046         }
2047     }
2048 
2049     if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) {
2050         r = CP_ACCESS_TRAP;
2051     }
2052     return r;
2053 }
2054 
2055 static void icc_reset(CPUARMState *env, const ARMCPRegInfo *ri)
2056 {
2057     GICv3CPUState *cs = icc_cs_from_env(env);
2058 
2059     cs->icc_ctlr_el1[GICV3_S] = ICC_CTLR_EL1_A3V |
2060         (1 << ICC_CTLR_EL1_IDBITS_SHIFT) |
2061         (7 << ICC_CTLR_EL1_PRIBITS_SHIFT);
2062     cs->icc_ctlr_el1[GICV3_NS] = ICC_CTLR_EL1_A3V |
2063         (1 << ICC_CTLR_EL1_IDBITS_SHIFT) |
2064         (7 << ICC_CTLR_EL1_PRIBITS_SHIFT);
2065     cs->icc_pmr_el1 = 0;
2066     cs->icc_bpr[GICV3_G0] = GIC_MIN_BPR;
2067     cs->icc_bpr[GICV3_G1] = GIC_MIN_BPR;
2068     cs->icc_bpr[GICV3_G1NS] = GIC_MIN_BPR_NS;
2069     memset(cs->icc_apr, 0, sizeof(cs->icc_apr));
2070     memset(cs->icc_igrpen, 0, sizeof(cs->icc_igrpen));
2071     cs->icc_ctlr_el3 = ICC_CTLR_EL3_NDS | ICC_CTLR_EL3_A3V |
2072         (1 << ICC_CTLR_EL3_IDBITS_SHIFT) |
2073         (7 << ICC_CTLR_EL3_PRIBITS_SHIFT);
2074 
2075     memset(cs->ich_apr, 0, sizeof(cs->ich_apr));
2076     cs->ich_hcr_el2 = 0;
2077     memset(cs->ich_lr_el2, 0, sizeof(cs->ich_lr_el2));
2078     cs->ich_vmcr_el2 = ICH_VMCR_EL2_VFIQEN |
2079         ((icv_min_vbpr(cs) + 1) << ICH_VMCR_EL2_VBPR1_SHIFT) |
2080         (icv_min_vbpr(cs) << ICH_VMCR_EL2_VBPR0_SHIFT);
2081 }
2082 
2083 static const ARMCPRegInfo gicv3_cpuif_reginfo[] = {
2084     { .name = "ICC_PMR_EL1", .state = ARM_CP_STATE_BOTH,
2085       .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 6, .opc2 = 0,
2086       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2087       .access = PL1_RW, .accessfn = gicv3_irqfiq_access,
2088       .readfn = icc_pmr_read,
2089       .writefn = icc_pmr_write,
2090       /* We hang the whole cpu interface reset routine off here
2091        * rather than parcelling it out into one little function
2092        * per register
2093        */
2094       .resetfn = icc_reset,
2095     },
2096     { .name = "ICC_IAR0_EL1", .state = ARM_CP_STATE_BOTH,
2097       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 0,
2098       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2099       .access = PL1_R, .accessfn = gicv3_fiq_access,
2100       .readfn = icc_iar0_read,
2101     },
2102     { .name = "ICC_EOIR0_EL1", .state = ARM_CP_STATE_BOTH,
2103       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 1,
2104       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2105       .access = PL1_W, .accessfn = gicv3_fiq_access,
2106       .writefn = icc_eoir_write,
2107     },
2108     { .name = "ICC_HPPIR0_EL1", .state = ARM_CP_STATE_BOTH,
2109       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 2,
2110       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2111       .access = PL1_R, .accessfn = gicv3_fiq_access,
2112       .readfn = icc_hppir0_read,
2113     },
2114     { .name = "ICC_BPR0_EL1", .state = ARM_CP_STATE_BOTH,
2115       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 3,
2116       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2117       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2118       .readfn = icc_bpr_read,
2119       .writefn = icc_bpr_write,
2120     },
2121     { .name = "ICC_AP0R0_EL1", .state = ARM_CP_STATE_BOTH,
2122       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 4,
2123       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2124       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2125       .readfn = icc_ap_read,
2126       .writefn = icc_ap_write,
2127     },
2128     { .name = "ICC_AP0R1_EL1", .state = ARM_CP_STATE_BOTH,
2129       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 5,
2130       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2131       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2132       .readfn = icc_ap_read,
2133       .writefn = icc_ap_write,
2134     },
2135     { .name = "ICC_AP0R2_EL1", .state = ARM_CP_STATE_BOTH,
2136       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 6,
2137       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2138       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2139       .readfn = icc_ap_read,
2140       .writefn = icc_ap_write,
2141     },
2142     { .name = "ICC_AP0R3_EL1", .state = ARM_CP_STATE_BOTH,
2143       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 7,
2144       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2145       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2146       .readfn = icc_ap_read,
2147       .writefn = icc_ap_write,
2148     },
2149     /* All the ICC_AP1R*_EL1 registers are banked */
2150     { .name = "ICC_AP1R0_EL1", .state = ARM_CP_STATE_BOTH,
2151       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 0,
2152       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2153       .access = PL1_RW, .accessfn = gicv3_irq_access,
2154       .readfn = icc_ap_read,
2155       .writefn = icc_ap_write,
2156     },
2157     { .name = "ICC_AP1R1_EL1", .state = ARM_CP_STATE_BOTH,
2158       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 1,
2159       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2160       .access = PL1_RW, .accessfn = gicv3_irq_access,
2161       .readfn = icc_ap_read,
2162       .writefn = icc_ap_write,
2163     },
2164     { .name = "ICC_AP1R2_EL1", .state = ARM_CP_STATE_BOTH,
2165       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 2,
2166       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2167       .access = PL1_RW, .accessfn = gicv3_irq_access,
2168       .readfn = icc_ap_read,
2169       .writefn = icc_ap_write,
2170     },
2171     { .name = "ICC_AP1R3_EL1", .state = ARM_CP_STATE_BOTH,
2172       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 3,
2173       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2174       .access = PL1_RW, .accessfn = gicv3_irq_access,
2175       .readfn = icc_ap_read,
2176       .writefn = icc_ap_write,
2177     },
2178     { .name = "ICC_DIR_EL1", .state = ARM_CP_STATE_BOTH,
2179       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 1,
2180       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2181       .access = PL1_W, .accessfn = gicv3_dir_access,
2182       .writefn = icc_dir_write,
2183     },
2184     { .name = "ICC_RPR_EL1", .state = ARM_CP_STATE_BOTH,
2185       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 3,
2186       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2187       .access = PL1_R, .accessfn = gicv3_irqfiq_access,
2188       .readfn = icc_rpr_read,
2189     },
2190     { .name = "ICC_SGI1R_EL1", .state = ARM_CP_STATE_AA64,
2191       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 5,
2192       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2193       .access = PL1_W, .accessfn = gicv3_sgi_access,
2194       .writefn = icc_sgi1r_write,
2195     },
2196     { .name = "ICC_SGI1R",
2197       .cp = 15, .opc1 = 0, .crm = 12,
2198       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_NO_RAW,
2199       .access = PL1_W, .accessfn = gicv3_sgi_access,
2200       .writefn = icc_sgi1r_write,
2201     },
2202     { .name = "ICC_ASGI1R_EL1", .state = ARM_CP_STATE_AA64,
2203       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 6,
2204       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2205       .access = PL1_W, .accessfn = gicv3_sgi_access,
2206       .writefn = icc_asgi1r_write,
2207     },
2208     { .name = "ICC_ASGI1R",
2209       .cp = 15, .opc1 = 1, .crm = 12,
2210       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_NO_RAW,
2211       .access = PL1_W, .accessfn = gicv3_sgi_access,
2212       .writefn = icc_asgi1r_write,
2213     },
2214     { .name = "ICC_SGI0R_EL1", .state = ARM_CP_STATE_AA64,
2215       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 7,
2216       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2217       .access = PL1_W, .accessfn = gicv3_sgi_access,
2218       .writefn = icc_sgi0r_write,
2219     },
2220     { .name = "ICC_SGI0R",
2221       .cp = 15, .opc1 = 2, .crm = 12,
2222       .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_NO_RAW,
2223       .access = PL1_W, .accessfn = gicv3_sgi_access,
2224       .writefn = icc_sgi0r_write,
2225     },
2226     { .name = "ICC_IAR1_EL1", .state = ARM_CP_STATE_BOTH,
2227       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 0,
2228       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2229       .access = PL1_R, .accessfn = gicv3_irq_access,
2230       .readfn = icc_iar1_read,
2231     },
2232     { .name = "ICC_EOIR1_EL1", .state = ARM_CP_STATE_BOTH,
2233       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 1,
2234       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2235       .access = PL1_W, .accessfn = gicv3_irq_access,
2236       .writefn = icc_eoir_write,
2237     },
2238     { .name = "ICC_HPPIR1_EL1", .state = ARM_CP_STATE_BOTH,
2239       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 2,
2240       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2241       .access = PL1_R, .accessfn = gicv3_irq_access,
2242       .readfn = icc_hppir1_read,
2243     },
2244     /* This register is banked */
2245     { .name = "ICC_BPR1_EL1", .state = ARM_CP_STATE_BOTH,
2246       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 3,
2247       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2248       .access = PL1_RW, .accessfn = gicv3_irq_access,
2249       .readfn = icc_bpr_read,
2250       .writefn = icc_bpr_write,
2251     },
2252     /* This register is banked */
2253     { .name = "ICC_CTLR_EL1", .state = ARM_CP_STATE_BOTH,
2254       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 4,
2255       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2256       .access = PL1_RW, .accessfn = gicv3_irqfiq_access,
2257       .readfn = icc_ctlr_el1_read,
2258       .writefn = icc_ctlr_el1_write,
2259     },
2260     { .name = "ICC_SRE_EL1", .state = ARM_CP_STATE_BOTH,
2261       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 5,
2262       .type = ARM_CP_NO_RAW | ARM_CP_CONST,
2263       .access = PL1_RW,
2264       /* We don't support IRQ/FIQ bypass and system registers are
2265        * always enabled, so all our bits are RAZ/WI or RAO/WI.
2266        * This register is banked but since it's constant we don't
2267        * need to do anything special.
2268        */
2269       .resetvalue = 0x7,
2270     },
2271     { .name = "ICC_IGRPEN0_EL1", .state = ARM_CP_STATE_BOTH,
2272       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 6,
2273       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2274       .access = PL1_RW, .accessfn = gicv3_fiq_access,
2275       .readfn = icc_igrpen_read,
2276       .writefn = icc_igrpen_write,
2277     },
2278     /* This register is banked */
2279     { .name = "ICC_IGRPEN1_EL1", .state = ARM_CP_STATE_BOTH,
2280       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 7,
2281       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2282       .access = PL1_RW, .accessfn = gicv3_irq_access,
2283       .readfn = icc_igrpen_read,
2284       .writefn = icc_igrpen_write,
2285     },
2286     { .name = "ICC_SRE_EL2", .state = ARM_CP_STATE_BOTH,
2287       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 5,
2288       .type = ARM_CP_NO_RAW | ARM_CP_CONST,
2289       .access = PL2_RW,
2290       /* We don't support IRQ/FIQ bypass and system registers are
2291        * always enabled, so all our bits are RAZ/WI or RAO/WI.
2292        */
2293       .resetvalue = 0xf,
2294     },
2295     { .name = "ICC_CTLR_EL3", .state = ARM_CP_STATE_BOTH,
2296       .opc0 = 3, .opc1 = 6, .crn = 12, .crm = 12, .opc2 = 4,
2297       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2298       .access = PL3_RW,
2299       .readfn = icc_ctlr_el3_read,
2300       .writefn = icc_ctlr_el3_write,
2301     },
2302     { .name = "ICC_SRE_EL3", .state = ARM_CP_STATE_BOTH,
2303       .opc0 = 3, .opc1 = 6, .crn = 12, .crm = 12, .opc2 = 5,
2304       .type = ARM_CP_NO_RAW | ARM_CP_CONST,
2305       .access = PL3_RW,
2306       /* We don't support IRQ/FIQ bypass and system registers are
2307        * always enabled, so all our bits are RAZ/WI or RAO/WI.
2308        */
2309       .resetvalue = 0xf,
2310     },
2311     { .name = "ICC_IGRPEN1_EL3", .state = ARM_CP_STATE_BOTH,
2312       .opc0 = 3, .opc1 = 6, .crn = 12, .crm = 12, .opc2 = 7,
2313       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2314       .access = PL3_RW,
2315       .readfn = icc_igrpen1_el3_read,
2316       .writefn = icc_igrpen1_el3_write,
2317     },
2318     REGINFO_SENTINEL
2319 };
2320 
2321 static uint64_t ich_ap_read(CPUARMState *env, const ARMCPRegInfo *ri)
2322 {
2323     GICv3CPUState *cs = icc_cs_from_env(env);
2324     int regno = ri->opc2 & 3;
2325     int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
2326     uint64_t value;
2327 
2328     value = cs->ich_apr[grp][regno];
2329     trace_gicv3_ich_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
2330     return value;
2331 }
2332 
2333 static void ich_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
2334                          uint64_t value)
2335 {
2336     GICv3CPUState *cs = icc_cs_from_env(env);
2337     int regno = ri->opc2 & 3;
2338     int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
2339 
2340     trace_gicv3_ich_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
2341 
2342     cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU;
2343     gicv3_cpuif_virt_update(cs);
2344 }
2345 
2346 static uint64_t ich_hcr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2347 {
2348     GICv3CPUState *cs = icc_cs_from_env(env);
2349     uint64_t value = cs->ich_hcr_el2;
2350 
2351     trace_gicv3_ich_hcr_read(gicv3_redist_affid(cs), value);
2352     return value;
2353 }
2354 
2355 static void ich_hcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
2356                           uint64_t value)
2357 {
2358     GICv3CPUState *cs = icc_cs_from_env(env);
2359 
2360     trace_gicv3_ich_hcr_write(gicv3_redist_affid(cs), value);
2361 
2362     value &= ICH_HCR_EL2_EN | ICH_HCR_EL2_UIE | ICH_HCR_EL2_LRENPIE |
2363         ICH_HCR_EL2_NPIE | ICH_HCR_EL2_VGRP0EIE | ICH_HCR_EL2_VGRP0DIE |
2364         ICH_HCR_EL2_VGRP1EIE | ICH_HCR_EL2_VGRP1DIE | ICH_HCR_EL2_TC |
2365         ICH_HCR_EL2_TALL0 | ICH_HCR_EL2_TALL1 | ICH_HCR_EL2_TSEI |
2366         ICH_HCR_EL2_TDIR | ICH_HCR_EL2_EOICOUNT_MASK;
2367 
2368     cs->ich_hcr_el2 = value;
2369     gicv3_cpuif_virt_update(cs);
2370 }
2371 
2372 static uint64_t ich_vmcr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2373 {
2374     GICv3CPUState *cs = icc_cs_from_env(env);
2375     uint64_t value = cs->ich_vmcr_el2;
2376 
2377     trace_gicv3_ich_vmcr_read(gicv3_redist_affid(cs), value);
2378     return value;
2379 }
2380 
2381 static void ich_vmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
2382                          uint64_t value)
2383 {
2384     GICv3CPUState *cs = icc_cs_from_env(env);
2385 
2386     trace_gicv3_ich_vmcr_write(gicv3_redist_affid(cs), value);
2387 
2388     value &= ICH_VMCR_EL2_VENG0 | ICH_VMCR_EL2_VENG1 | ICH_VMCR_EL2_VCBPR |
2389         ICH_VMCR_EL2_VEOIM | ICH_VMCR_EL2_VBPR1_MASK |
2390         ICH_VMCR_EL2_VBPR0_MASK | ICH_VMCR_EL2_VPMR_MASK;
2391     value |= ICH_VMCR_EL2_VFIQEN;
2392 
2393     cs->ich_vmcr_el2 = value;
2394     /* Enforce "writing BPRs to less than minimum sets them to the minimum"
2395      * by reading and writing back the fields.
2396      */
2397     write_vbpr(cs, GICV3_G0, read_vbpr(cs, GICV3_G0));
2398     write_vbpr(cs, GICV3_G1, read_vbpr(cs, GICV3_G1));
2399 
2400     gicv3_cpuif_virt_update(cs);
2401 }
2402 
2403 static uint64_t ich_lr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2404 {
2405     GICv3CPUState *cs = icc_cs_from_env(env);
2406     int regno = ri->opc2 | ((ri->crm & 1) << 3);
2407     uint64_t value;
2408 
2409     /* This read function handles all of:
2410      * 64-bit reads of the whole LR
2411      * 32-bit reads of the low half of the LR
2412      * 32-bit reads of the high half of the LR
2413      */
2414     if (ri->state == ARM_CP_STATE_AA32) {
2415         if (ri->crm >= 14) {
2416             value = extract64(cs->ich_lr_el2[regno], 32, 32);
2417             trace_gicv3_ich_lrc_read(regno, gicv3_redist_affid(cs), value);
2418         } else {
2419             value = extract64(cs->ich_lr_el2[regno], 0, 32);
2420             trace_gicv3_ich_lr32_read(regno, gicv3_redist_affid(cs), value);
2421         }
2422     } else {
2423         value = cs->ich_lr_el2[regno];
2424         trace_gicv3_ich_lr_read(regno, gicv3_redist_affid(cs), value);
2425     }
2426 
2427     return value;
2428 }
2429 
2430 static void ich_lr_write(CPUARMState *env, const ARMCPRegInfo *ri,
2431                          uint64_t value)
2432 {
2433     GICv3CPUState *cs = icc_cs_from_env(env);
2434     int regno = ri->opc2 | ((ri->crm & 1) << 3);
2435 
2436     /* This write function handles all of:
2437      * 64-bit writes to the whole LR
2438      * 32-bit writes to the low half of the LR
2439      * 32-bit writes to the high half of the LR
2440      */
2441     if (ri->state == ARM_CP_STATE_AA32) {
2442         if (ri->crm >= 14) {
2443             trace_gicv3_ich_lrc_write(regno, gicv3_redist_affid(cs), value);
2444             value = deposit64(cs->ich_lr_el2[regno], 32, 32, value);
2445         } else {
2446             trace_gicv3_ich_lr32_write(regno, gicv3_redist_affid(cs), value);
2447             value = deposit64(cs->ich_lr_el2[regno], 0, 32, value);
2448         }
2449     } else {
2450         trace_gicv3_ich_lr_write(regno, gicv3_redist_affid(cs), value);
2451     }
2452 
2453     /* Enforce RES0 bits in priority field */
2454     if (cs->vpribits < 8) {
2455         value = deposit64(value, ICH_LR_EL2_PRIORITY_SHIFT,
2456                           8 - cs->vpribits, 0);
2457     }
2458 
2459     cs->ich_lr_el2[regno] = value;
2460     gicv3_cpuif_virt_update(cs);
2461 }
2462 
2463 static uint64_t ich_vtr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2464 {
2465     GICv3CPUState *cs = icc_cs_from_env(env);
2466     uint64_t value;
2467 
2468     value = ((cs->num_list_regs - 1) << ICH_VTR_EL2_LISTREGS_SHIFT)
2469         | ICH_VTR_EL2_TDS | ICH_VTR_EL2_NV4 | ICH_VTR_EL2_A3V
2470         | (1 << ICH_VTR_EL2_IDBITS_SHIFT)
2471         | ((cs->vprebits - 1) << ICH_VTR_EL2_PREBITS_SHIFT)
2472         | ((cs->vpribits - 1) << ICH_VTR_EL2_PRIBITS_SHIFT);
2473 
2474     trace_gicv3_ich_vtr_read(gicv3_redist_affid(cs), value);
2475     return value;
2476 }
2477 
2478 static uint64_t ich_misr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2479 {
2480     GICv3CPUState *cs = icc_cs_from_env(env);
2481     uint64_t value = maintenance_interrupt_state(cs);
2482 
2483     trace_gicv3_ich_misr_read(gicv3_redist_affid(cs), value);
2484     return value;
2485 }
2486 
2487 static uint64_t ich_eisr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2488 {
2489     GICv3CPUState *cs = icc_cs_from_env(env);
2490     uint64_t value = eoi_maintenance_interrupt_state(cs, NULL);
2491 
2492     trace_gicv3_ich_eisr_read(gicv3_redist_affid(cs), value);
2493     return value;
2494 }
2495 
2496 static uint64_t ich_elrsr_read(CPUARMState *env, const ARMCPRegInfo *ri)
2497 {
2498     GICv3CPUState *cs = icc_cs_from_env(env);
2499     uint64_t value = 0;
2500     int i;
2501 
2502     for (i = 0; i < cs->num_list_regs; i++) {
2503         uint64_t lr = cs->ich_lr_el2[i];
2504 
2505         if ((lr & ICH_LR_EL2_STATE_MASK) == 0 &&
2506             ((lr & ICH_LR_EL2_HW) != 0 || (lr & ICH_LR_EL2_EOI) == 0)) {
2507             value |= (1 << i);
2508         }
2509     }
2510 
2511     trace_gicv3_ich_elrsr_read(gicv3_redist_affid(cs), value);
2512     return value;
2513 }
2514 
2515 static const ARMCPRegInfo gicv3_cpuif_hcr_reginfo[] = {
2516     { .name = "ICH_AP0R0_EL2", .state = ARM_CP_STATE_BOTH,
2517       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 0,
2518       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2519       .access = PL2_RW,
2520       .readfn = ich_ap_read,
2521       .writefn = ich_ap_write,
2522     },
2523     { .name = "ICH_AP1R0_EL2", .state = ARM_CP_STATE_BOTH,
2524       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 0,
2525       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2526       .access = PL2_RW,
2527       .readfn = ich_ap_read,
2528       .writefn = ich_ap_write,
2529     },
2530     { .name = "ICH_HCR_EL2", .state = ARM_CP_STATE_BOTH,
2531       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 0,
2532       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2533       .access = PL2_RW,
2534       .readfn = ich_hcr_read,
2535       .writefn = ich_hcr_write,
2536     },
2537     { .name = "ICH_VTR_EL2", .state = ARM_CP_STATE_BOTH,
2538       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 1,
2539       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2540       .access = PL2_R,
2541       .readfn = ich_vtr_read,
2542     },
2543     { .name = "ICH_MISR_EL2", .state = ARM_CP_STATE_BOTH,
2544       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 2,
2545       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2546       .access = PL2_R,
2547       .readfn = ich_misr_read,
2548     },
2549     { .name = "ICH_EISR_EL2", .state = ARM_CP_STATE_BOTH,
2550       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 3,
2551       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2552       .access = PL2_R,
2553       .readfn = ich_eisr_read,
2554     },
2555     { .name = "ICH_ELRSR_EL2", .state = ARM_CP_STATE_BOTH,
2556       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 5,
2557       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2558       .access = PL2_R,
2559       .readfn = ich_elrsr_read,
2560     },
2561     { .name = "ICH_VMCR_EL2", .state = ARM_CP_STATE_BOTH,
2562       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 7,
2563       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2564       .access = PL2_RW,
2565       .readfn = ich_vmcr_read,
2566       .writefn = ich_vmcr_write,
2567     },
2568     REGINFO_SENTINEL
2569 };
2570 
2571 static const ARMCPRegInfo gicv3_cpuif_ich_apxr1_reginfo[] = {
2572     { .name = "ICH_AP0R1_EL2", .state = ARM_CP_STATE_BOTH,
2573       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 1,
2574       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2575       .access = PL2_RW,
2576       .readfn = ich_ap_read,
2577       .writefn = ich_ap_write,
2578     },
2579     { .name = "ICH_AP1R1_EL2", .state = ARM_CP_STATE_BOTH,
2580       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 1,
2581       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2582       .access = PL2_RW,
2583       .readfn = ich_ap_read,
2584       .writefn = ich_ap_write,
2585     },
2586     REGINFO_SENTINEL
2587 };
2588 
2589 static const ARMCPRegInfo gicv3_cpuif_ich_apxr23_reginfo[] = {
2590     { .name = "ICH_AP0R2_EL2", .state = ARM_CP_STATE_BOTH,
2591       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 2,
2592       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2593       .access = PL2_RW,
2594       .readfn = ich_ap_read,
2595       .writefn = ich_ap_write,
2596     },
2597     { .name = "ICH_AP0R3_EL2", .state = ARM_CP_STATE_BOTH,
2598       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 3,
2599       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2600       .access = PL2_RW,
2601       .readfn = ich_ap_read,
2602       .writefn = ich_ap_write,
2603     },
2604     { .name = "ICH_AP1R2_EL2", .state = ARM_CP_STATE_BOTH,
2605       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 2,
2606       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2607       .access = PL2_RW,
2608       .readfn = ich_ap_read,
2609       .writefn = ich_ap_write,
2610     },
2611     { .name = "ICH_AP1R3_EL2", .state = ARM_CP_STATE_BOTH,
2612       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 3,
2613       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2614       .access = PL2_RW,
2615       .readfn = ich_ap_read,
2616       .writefn = ich_ap_write,
2617     },
2618     REGINFO_SENTINEL
2619 };
2620 
2621 static void gicv3_cpuif_el_change_hook(ARMCPU *cpu, void *opaque)
2622 {
2623     GICv3CPUState *cs = opaque;
2624 
2625     gicv3_cpuif_update(cs);
2626 }
2627 
2628 void gicv3_init_cpuif(GICv3State *s)
2629 {
2630     /* Called from the GICv3 realize function; register our system
2631      * registers with the CPU
2632      */
2633     int i;
2634 
2635     for (i = 0; i < s->num_cpu; i++) {
2636         ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i));
2637         GICv3CPUState *cs = &s->cpu[i];
2638 
2639         /* Note that we can't just use the GICv3CPUState as an opaque pointer
2640          * in define_arm_cp_regs_with_opaque(), because when we're called back
2641          * it might be with code translated by CPU 0 but run by CPU 1, in
2642          * which case we'd get the wrong value.
2643          * So instead we define the regs with no ri->opaque info, and
2644          * get back to the GICv3CPUState from the CPUARMState.
2645          */
2646         define_arm_cp_regs(cpu, gicv3_cpuif_reginfo);
2647         if (arm_feature(&cpu->env, ARM_FEATURE_EL2)
2648             && cpu->gic_num_lrs) {
2649             int j;
2650 
2651             cs->num_list_regs = cpu->gic_num_lrs;
2652             cs->vpribits = cpu->gic_vpribits;
2653             cs->vprebits = cpu->gic_vprebits;
2654 
2655             /* Check against architectural constraints: getting these
2656              * wrong would be a bug in the CPU code defining these,
2657              * and the implementation relies on them holding.
2658              */
2659             g_assert(cs->vprebits <= cs->vpribits);
2660             g_assert(cs->vprebits >= 5 && cs->vprebits <= 7);
2661             g_assert(cs->vpribits >= 5 && cs->vpribits <= 8);
2662 
2663             define_arm_cp_regs(cpu, gicv3_cpuif_hcr_reginfo);
2664 
2665             for (j = 0; j < cs->num_list_regs; j++) {
2666                 /* Note that the AArch64 LRs are 64-bit; the AArch32 LRs
2667                  * are split into two cp15 regs, LR (the low part, with the
2668                  * same encoding as the AArch64 LR) and LRC (the high part).
2669                  */
2670                 ARMCPRegInfo lr_regset[] = {
2671                     { .name = "ICH_LRn_EL2", .state = ARM_CP_STATE_BOTH,
2672                       .opc0 = 3, .opc1 = 4, .crn = 12,
2673                       .crm = 12 + (j >> 3), .opc2 = j & 7,
2674                       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2675                       .access = PL2_RW,
2676                       .readfn = ich_lr_read,
2677                       .writefn = ich_lr_write,
2678                     },
2679                     { .name = "ICH_LRCn_EL2", .state = ARM_CP_STATE_AA32,
2680                       .cp = 15, .opc1 = 4, .crn = 12,
2681                       .crm = 14 + (j >> 3), .opc2 = j & 7,
2682                       .type = ARM_CP_IO | ARM_CP_NO_RAW,
2683                       .access = PL2_RW,
2684                       .readfn = ich_lr_read,
2685                       .writefn = ich_lr_write,
2686                     },
2687                     REGINFO_SENTINEL
2688                 };
2689                 define_arm_cp_regs(cpu, lr_regset);
2690             }
2691             if (cs->vprebits >= 6) {
2692                 define_arm_cp_regs(cpu, gicv3_cpuif_ich_apxr1_reginfo);
2693             }
2694             if (cs->vprebits == 7) {
2695                 define_arm_cp_regs(cpu, gicv3_cpuif_ich_apxr23_reginfo);
2696             }
2697         }
2698         arm_register_el_change_hook(cpu, gicv3_cpuif_el_change_hook, cs);
2699     }
2700 }
2701