1 /* 2 * TI TSC2102 (touchscreen/sensors/audio controller) emulator. 3 * TI TSC2301 (touchscreen/sensors/keypad). 4 * 5 * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> 6 * Copyright (C) 2008 Nokia Corporation 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 or 11 * (at your option) version 3 of the License. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License along 19 * with this program; if not, see <http://www.gnu.org/licenses/>. 20 */ 21 22 #include "hw/hw.h" 23 #include "audio/audio.h" 24 #include "qemu/timer.h" 25 #include "ui/console.h" 26 #include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ 27 #include "hw/devices.h" 28 29 #define TSC_DATA_REGISTERS_PAGE 0x0 30 #define TSC_CONTROL_REGISTERS_PAGE 0x1 31 #define TSC_AUDIO_REGISTERS_PAGE 0x2 32 33 #define TSC_VERBOSE 34 35 #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - resolution[p])) 36 37 typedef struct { 38 qemu_irq pint; 39 qemu_irq kbint; 40 qemu_irq davint; 41 QEMUTimer *timer; 42 QEMUSoundCard card; 43 uWireSlave chip; 44 I2SCodec codec; 45 uint8_t in_fifo[16384]; 46 uint8_t out_fifo[16384]; 47 uint16_t model; 48 49 int x, y; 50 int pressure; 51 52 int state, page, offset, irq; 53 uint16_t command, dav; 54 55 int busy; 56 int enabled; 57 int host_mode; 58 int function; 59 int nextfunction; 60 int precision; 61 int nextprecision; 62 int filter; 63 int pin_func; 64 int ref; 65 int timing; 66 int noise; 67 68 uint16_t audio_ctrl1; 69 uint16_t audio_ctrl2; 70 uint16_t audio_ctrl3; 71 uint16_t pll[3]; 72 uint16_t volume; 73 int64_t volume_change; 74 int softstep; 75 uint16_t dac_power; 76 int64_t powerdown; 77 uint16_t filter_data[0x14]; 78 79 const char *name; 80 SWVoiceIn *adc_voice[1]; 81 SWVoiceOut *dac_voice[1]; 82 int i2s_rx_rate; 83 int i2s_tx_rate; 84 85 int tr[8]; 86 87 struct { 88 uint16_t down; 89 uint16_t mask; 90 int scan; 91 int debounce; 92 int mode; 93 int intr; 94 } kb; 95 } TSC210xState; 96 97 static const int resolution[4] = { 12, 8, 10, 12 }; 98 99 #define TSC_MODE_NO_SCAN 0x0 100 #define TSC_MODE_XY_SCAN 0x1 101 #define TSC_MODE_XYZ_SCAN 0x2 102 #define TSC_MODE_X 0x3 103 #define TSC_MODE_Y 0x4 104 #define TSC_MODE_Z 0x5 105 #define TSC_MODE_BAT1 0x6 106 #define TSC_MODE_BAT2 0x7 107 #define TSC_MODE_AUX 0x8 108 #define TSC_MODE_AUX_SCAN 0x9 109 #define TSC_MODE_TEMP1 0xa 110 #define TSC_MODE_PORT_SCAN 0xb 111 #define TSC_MODE_TEMP2 0xc 112 #define TSC_MODE_XX_DRV 0xd 113 #define TSC_MODE_YY_DRV 0xe 114 #define TSC_MODE_YX_DRV 0xf 115 116 static const uint16_t mode_regs[16] = { 117 0x0000, /* No scan */ 118 0x0600, /* X, Y scan */ 119 0x0780, /* X, Y, Z scan */ 120 0x0400, /* X */ 121 0x0200, /* Y */ 122 0x0180, /* Z */ 123 0x0040, /* BAT1 */ 124 0x0030, /* BAT2 */ 125 0x0010, /* AUX */ 126 0x0010, /* AUX scan */ 127 0x0004, /* TEMP1 */ 128 0x0070, /* Port scan */ 129 0x0002, /* TEMP2 */ 130 0x0000, /* X+, X- drivers */ 131 0x0000, /* Y+, Y- drivers */ 132 0x0000, /* Y+, X- drivers */ 133 }; 134 135 #define X_TRANSFORM(s) \ 136 ((s->y * s->tr[0] - s->x * s->tr[1]) / s->tr[2] + s->tr[3]) 137 #define Y_TRANSFORM(s) \ 138 ((s->y * s->tr[4] - s->x * s->tr[5]) / s->tr[6] + s->tr[7]) 139 #define Z1_TRANSFORM(s) \ 140 ((400 - ((s)->x >> 7) + ((s)->pressure << 10)) << 4) 141 #define Z2_TRANSFORM(s) \ 142 ((4000 + ((s)->y >> 7) - ((s)->pressure << 10)) << 4) 143 144 #define BAT1_VAL 0x8660 145 #define BAT2_VAL 0x0000 146 #define AUX1_VAL 0x35c0 147 #define AUX2_VAL 0xffff 148 #define TEMP1_VAL 0x8c70 149 #define TEMP2_VAL 0xa5b0 150 151 #define TSC_POWEROFF_DELAY 50 152 #define TSC_SOFTSTEP_DELAY 50 153 154 static void tsc210x_reset(TSC210xState *s) 155 { 156 s->state = 0; 157 s->pin_func = 2; 158 s->enabled = 0; 159 s->busy = 0; 160 s->nextfunction = 0; 161 s->ref = 0; 162 s->timing = 0; 163 s->irq = 0; 164 s->dav = 0; 165 166 s->audio_ctrl1 = 0x0000; 167 s->audio_ctrl2 = 0x4410; 168 s->audio_ctrl3 = 0x0000; 169 s->pll[0] = 0x1004; 170 s->pll[1] = 0x0000; 171 s->pll[2] = 0x1fff; 172 s->volume = 0xffff; 173 s->dac_power = 0x8540; 174 s->softstep = 1; 175 s->volume_change = 0; 176 s->powerdown = 0; 177 s->filter_data[0x00] = 0x6be3; 178 s->filter_data[0x01] = 0x9666; 179 s->filter_data[0x02] = 0x675d; 180 s->filter_data[0x03] = 0x6be3; 181 s->filter_data[0x04] = 0x9666; 182 s->filter_data[0x05] = 0x675d; 183 s->filter_data[0x06] = 0x7d83; 184 s->filter_data[0x07] = 0x84ee; 185 s->filter_data[0x08] = 0x7d83; 186 s->filter_data[0x09] = 0x84ee; 187 s->filter_data[0x0a] = 0x6be3; 188 s->filter_data[0x0b] = 0x9666; 189 s->filter_data[0x0c] = 0x675d; 190 s->filter_data[0x0d] = 0x6be3; 191 s->filter_data[0x0e] = 0x9666; 192 s->filter_data[0x0f] = 0x675d; 193 s->filter_data[0x10] = 0x7d83; 194 s->filter_data[0x11] = 0x84ee; 195 s->filter_data[0x12] = 0x7d83; 196 s->filter_data[0x13] = 0x84ee; 197 198 s->i2s_tx_rate = 0; 199 s->i2s_rx_rate = 0; 200 201 s->kb.scan = 1; 202 s->kb.debounce = 0; 203 s->kb.mask = 0x0000; 204 s->kb.mode = 3; 205 s->kb.intr = 0; 206 207 qemu_set_irq(s->pint, !s->irq); 208 qemu_set_irq(s->davint, !s->dav); 209 qemu_irq_raise(s->kbint); 210 } 211 212 typedef struct { 213 int rate; 214 int dsor; 215 int fsref; 216 } TSC210xRateInfo; 217 218 /* { rate, dsor, fsref } */ 219 static const TSC210xRateInfo tsc2101_rates[] = { 220 /* Fsref / 6.0 */ 221 { 7350, 7, 1 }, 222 { 8000, 7, 0 }, 223 /* Fsref / 5.5 */ 224 { 8018, 6, 1 }, 225 { 8727, 6, 0 }, 226 /* Fsref / 5.0 */ 227 { 8820, 5, 1 }, 228 { 9600, 5, 0 }, 229 /* Fsref / 4.0 */ 230 { 11025, 4, 1 }, 231 { 12000, 4, 0 }, 232 /* Fsref / 3.0 */ 233 { 14700, 3, 1 }, 234 { 16000, 3, 0 }, 235 /* Fsref / 2.0 */ 236 { 22050, 2, 1 }, 237 { 24000, 2, 0 }, 238 /* Fsref / 1.5 */ 239 { 29400, 1, 1 }, 240 { 32000, 1, 0 }, 241 /* Fsref */ 242 { 44100, 0, 1 }, 243 { 48000, 0, 0 }, 244 245 { 0, 0, 0 }, 246 }; 247 248 /* { rate, dsor, fsref } */ 249 static const TSC210xRateInfo tsc2102_rates[] = { 250 /* Fsref / 6.0 */ 251 { 7350, 63, 1 }, 252 { 8000, 63, 0 }, 253 /* Fsref / 6.0 */ 254 { 7350, 54, 1 }, 255 { 8000, 54, 0 }, 256 /* Fsref / 5.0 */ 257 { 8820, 45, 1 }, 258 { 9600, 45, 0 }, 259 /* Fsref / 4.0 */ 260 { 11025, 36, 1 }, 261 { 12000, 36, 0 }, 262 /* Fsref / 3.0 */ 263 { 14700, 27, 1 }, 264 { 16000, 27, 0 }, 265 /* Fsref / 2.0 */ 266 { 22050, 18, 1 }, 267 { 24000, 18, 0 }, 268 /* Fsref / 1.5 */ 269 { 29400, 9, 1 }, 270 { 32000, 9, 0 }, 271 /* Fsref */ 272 { 44100, 0, 1 }, 273 { 48000, 0, 0 }, 274 275 { 0, 0, 0 }, 276 }; 277 278 static inline void tsc210x_out_flush(TSC210xState *s, int len) 279 { 280 uint8_t *data = s->codec.out.fifo + s->codec.out.start; 281 uint8_t *end = data + len; 282 283 while (data < end) 284 data += AUD_write(s->dac_voice[0], data, end - data) ?: (end - data); 285 286 s->codec.out.len -= len; 287 if (s->codec.out.len) 288 memmove(s->codec.out.fifo, end, s->codec.out.len); 289 s->codec.out.start = 0; 290 } 291 292 static void tsc210x_audio_out_cb(TSC210xState *s, int free_b) 293 { 294 if (s->codec.out.len >= free_b) { 295 tsc210x_out_flush(s, free_b); 296 return; 297 } 298 299 s->codec.out.size = MIN(free_b, 16384); 300 qemu_irq_raise(s->codec.tx_start); 301 } 302 303 static void tsc2102_audio_rate_update(TSC210xState *s) 304 { 305 const TSC210xRateInfo *rate; 306 307 s->codec.tx_rate = 0; 308 s->codec.rx_rate = 0; 309 if (s->dac_power & (1 << 15)) /* PWDNC */ 310 return; 311 312 for (rate = tsc2102_rates; rate->rate; rate ++) 313 if (rate->dsor == (s->audio_ctrl1 & 0x3f) && /* DACFS */ 314 rate->fsref == ((s->audio_ctrl3 >> 13) & 1))/* REFFS */ 315 break; 316 if (!rate->rate) { 317 printf("%s: unknown sampling rate configured\n", __FUNCTION__); 318 return; 319 } 320 321 s->codec.tx_rate = rate->rate; 322 } 323 324 static void tsc2102_audio_output_update(TSC210xState *s) 325 { 326 int enable; 327 struct audsettings fmt; 328 329 if (s->dac_voice[0]) { 330 tsc210x_out_flush(s, s->codec.out.len); 331 s->codec.out.size = 0; 332 AUD_set_active_out(s->dac_voice[0], 0); 333 AUD_close_out(&s->card, s->dac_voice[0]); 334 s->dac_voice[0] = NULL; 335 } 336 s->codec.cts = 0; 337 338 enable = 339 (~s->dac_power & (1 << 15)) && /* PWDNC */ 340 (~s->dac_power & (1 << 10)); /* DAPWDN */ 341 if (!enable || !s->codec.tx_rate) 342 return; 343 344 /* Force our own sampling rate even in slave DAC mode */ 345 fmt.endianness = 0; 346 fmt.nchannels = 2; 347 fmt.freq = s->codec.tx_rate; 348 fmt.fmt = AUD_FMT_S16; 349 350 s->dac_voice[0] = AUD_open_out(&s->card, s->dac_voice[0], 351 "tsc2102.sink", s, (void *) tsc210x_audio_out_cb, &fmt); 352 if (s->dac_voice[0]) { 353 s->codec.cts = 1; 354 AUD_set_active_out(s->dac_voice[0], 1); 355 } 356 } 357 358 static uint16_t tsc2102_data_register_read(TSC210xState *s, int reg) 359 { 360 switch (reg) { 361 case 0x00: /* X */ 362 s->dav &= 0xfbff; 363 return TSC_CUT_RESOLUTION(X_TRANSFORM(s), s->precision) + 364 (s->noise & 3); 365 366 case 0x01: /* Y */ 367 s->noise ++; 368 s->dav &= 0xfdff; 369 return TSC_CUT_RESOLUTION(Y_TRANSFORM(s), s->precision) ^ 370 (s->noise & 3); 371 372 case 0x02: /* Z1 */ 373 s->dav &= 0xfeff; 374 return TSC_CUT_RESOLUTION(Z1_TRANSFORM(s), s->precision) - 375 (s->noise & 3); 376 377 case 0x03: /* Z2 */ 378 s->dav &= 0xff7f; 379 return TSC_CUT_RESOLUTION(Z2_TRANSFORM(s), s->precision) | 380 (s->noise & 3); 381 382 case 0x04: /* KPData */ 383 if ((s->model & 0xff00) == 0x2300) { 384 if (s->kb.intr && (s->kb.mode & 2)) { 385 s->kb.intr = 0; 386 qemu_irq_raise(s->kbint); 387 } 388 return s->kb.down; 389 } 390 391 return 0xffff; 392 393 case 0x05: /* BAT1 */ 394 s->dav &= 0xffbf; 395 return TSC_CUT_RESOLUTION(BAT1_VAL, s->precision) + 396 (s->noise & 6); 397 398 case 0x06: /* BAT2 */ 399 s->dav &= 0xffdf; 400 return TSC_CUT_RESOLUTION(BAT2_VAL, s->precision); 401 402 case 0x07: /* AUX1 */ 403 s->dav &= 0xffef; 404 return TSC_CUT_RESOLUTION(AUX1_VAL, s->precision); 405 406 case 0x08: /* AUX2 */ 407 s->dav &= 0xfff7; 408 return 0xffff; 409 410 case 0x09: /* TEMP1 */ 411 s->dav &= 0xfffb; 412 return TSC_CUT_RESOLUTION(TEMP1_VAL, s->precision) - 413 (s->noise & 5); 414 415 case 0x0a: /* TEMP2 */ 416 s->dav &= 0xfffd; 417 return TSC_CUT_RESOLUTION(TEMP2_VAL, s->precision) ^ 418 (s->noise & 3); 419 420 case 0x0b: /* DAC */ 421 s->dav &= 0xfffe; 422 return 0xffff; 423 424 default: 425 #ifdef TSC_VERBOSE 426 fprintf(stderr, "tsc2102_data_register_read: " 427 "no such register: 0x%02x\n", reg); 428 #endif 429 return 0xffff; 430 } 431 } 432 433 static uint16_t tsc2102_control_register_read( 434 TSC210xState *s, int reg) 435 { 436 switch (reg) { 437 case 0x00: /* TSC ADC */ 438 return (s->pressure << 15) | ((!s->busy) << 14) | 439 (s->nextfunction << 10) | (s->nextprecision << 8) | s->filter; 440 441 case 0x01: /* Status / Keypad Control */ 442 if ((s->model & 0xff00) == 0x2100) 443 return (s->pin_func << 14) | ((!s->enabled) << 13) | 444 (s->host_mode << 12) | ((!!s->dav) << 11) | s->dav; 445 else 446 return (s->kb.intr << 15) | ((s->kb.scan || !s->kb.down) << 14) | 447 (s->kb.debounce << 11); 448 449 case 0x02: /* DAC Control */ 450 if ((s->model & 0xff00) == 0x2300) 451 return s->dac_power & 0x8000; 452 else 453 goto bad_reg; 454 455 case 0x03: /* Reference */ 456 return s->ref; 457 458 case 0x04: /* Reset */ 459 return 0xffff; 460 461 case 0x05: /* Configuration */ 462 return s->timing; 463 464 case 0x06: /* Secondary configuration */ 465 if ((s->model & 0xff00) == 0x2100) 466 goto bad_reg; 467 return ((!s->dav) << 15) | ((s->kb.mode & 1) << 14) | s->pll[2]; 468 469 case 0x10: /* Keypad Mask */ 470 if ((s->model & 0xff00) == 0x2100) 471 goto bad_reg; 472 return s->kb.mask; 473 474 default: 475 bad_reg: 476 #ifdef TSC_VERBOSE 477 fprintf(stderr, "tsc2102_control_register_read: " 478 "no such register: 0x%02x\n", reg); 479 #endif 480 return 0xffff; 481 } 482 } 483 484 static uint16_t tsc2102_audio_register_read(TSC210xState *s, int reg) 485 { 486 int l_ch, r_ch; 487 uint16_t val; 488 489 switch (reg) { 490 case 0x00: /* Audio Control 1 */ 491 return s->audio_ctrl1; 492 493 case 0x01: 494 return 0xff00; 495 496 case 0x02: /* DAC Volume Control */ 497 return s->volume; 498 499 case 0x03: 500 return 0x8b00; 501 502 case 0x04: /* Audio Control 2 */ 503 l_ch = 1; 504 r_ch = 1; 505 if (s->softstep && !(s->dac_power & (1 << 10))) { 506 l_ch = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) > 507 s->volume_change + TSC_SOFTSTEP_DELAY); 508 r_ch = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) > 509 s->volume_change + TSC_SOFTSTEP_DELAY); 510 } 511 512 return s->audio_ctrl2 | (l_ch << 3) | (r_ch << 2); 513 514 case 0x05: /* Stereo DAC Power Control */ 515 return 0x2aa0 | s->dac_power | 516 (((s->dac_power & (1 << 10)) && 517 (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) > 518 s->powerdown + TSC_POWEROFF_DELAY)) << 6); 519 520 case 0x06: /* Audio Control 3 */ 521 val = s->audio_ctrl3 | 0x0001; 522 s->audio_ctrl3 &= 0xff3f; 523 return val; 524 525 case 0x07: /* LCH_BASS_BOOST_N0 */ 526 case 0x08: /* LCH_BASS_BOOST_N1 */ 527 case 0x09: /* LCH_BASS_BOOST_N2 */ 528 case 0x0a: /* LCH_BASS_BOOST_N3 */ 529 case 0x0b: /* LCH_BASS_BOOST_N4 */ 530 case 0x0c: /* LCH_BASS_BOOST_N5 */ 531 case 0x0d: /* LCH_BASS_BOOST_D1 */ 532 case 0x0e: /* LCH_BASS_BOOST_D2 */ 533 case 0x0f: /* LCH_BASS_BOOST_D4 */ 534 case 0x10: /* LCH_BASS_BOOST_D5 */ 535 case 0x11: /* RCH_BASS_BOOST_N0 */ 536 case 0x12: /* RCH_BASS_BOOST_N1 */ 537 case 0x13: /* RCH_BASS_BOOST_N2 */ 538 case 0x14: /* RCH_BASS_BOOST_N3 */ 539 case 0x15: /* RCH_BASS_BOOST_N4 */ 540 case 0x16: /* RCH_BASS_BOOST_N5 */ 541 case 0x17: /* RCH_BASS_BOOST_D1 */ 542 case 0x18: /* RCH_BASS_BOOST_D2 */ 543 case 0x19: /* RCH_BASS_BOOST_D4 */ 544 case 0x1a: /* RCH_BASS_BOOST_D5 */ 545 return s->filter_data[reg - 0x07]; 546 547 case 0x1b: /* PLL Programmability 1 */ 548 return s->pll[0]; 549 550 case 0x1c: /* PLL Programmability 2 */ 551 return s->pll[1]; 552 553 case 0x1d: /* Audio Control 4 */ 554 return (!s->softstep) << 14; 555 556 default: 557 #ifdef TSC_VERBOSE 558 fprintf(stderr, "tsc2102_audio_register_read: " 559 "no such register: 0x%02x\n", reg); 560 #endif 561 return 0xffff; 562 } 563 } 564 565 static void tsc2102_data_register_write( 566 TSC210xState *s, int reg, uint16_t value) 567 { 568 switch (reg) { 569 case 0x00: /* X */ 570 case 0x01: /* Y */ 571 case 0x02: /* Z1 */ 572 case 0x03: /* Z2 */ 573 case 0x05: /* BAT1 */ 574 case 0x06: /* BAT2 */ 575 case 0x07: /* AUX1 */ 576 case 0x08: /* AUX2 */ 577 case 0x09: /* TEMP1 */ 578 case 0x0a: /* TEMP2 */ 579 return; 580 581 default: 582 #ifdef TSC_VERBOSE 583 fprintf(stderr, "tsc2102_data_register_write: " 584 "no such register: 0x%02x\n", reg); 585 #endif 586 } 587 } 588 589 static void tsc2102_control_register_write( 590 TSC210xState *s, int reg, uint16_t value) 591 { 592 switch (reg) { 593 case 0x00: /* TSC ADC */ 594 s->host_mode = value >> 15; 595 s->enabled = !(value & 0x4000); 596 if (s->busy && !s->enabled) 597 timer_del(s->timer); 598 s->busy &= s->enabled; 599 s->nextfunction = (value >> 10) & 0xf; 600 s->nextprecision = (value >> 8) & 3; 601 s->filter = value & 0xff; 602 return; 603 604 case 0x01: /* Status / Keypad Control */ 605 if ((s->model & 0xff00) == 0x2100) 606 s->pin_func = value >> 14; 607 else { 608 s->kb.scan = (value >> 14) & 1; 609 s->kb.debounce = (value >> 11) & 7; 610 if (s->kb.intr && s->kb.scan) { 611 s->kb.intr = 0; 612 qemu_irq_raise(s->kbint); 613 } 614 } 615 return; 616 617 case 0x02: /* DAC Control */ 618 if ((s->model & 0xff00) == 0x2300) { 619 s->dac_power &= 0x7fff; 620 s->dac_power |= 0x8000 & value; 621 } else 622 goto bad_reg; 623 break; 624 625 case 0x03: /* Reference */ 626 s->ref = value & 0x1f; 627 return; 628 629 case 0x04: /* Reset */ 630 if (value == 0xbb00) { 631 if (s->busy) 632 timer_del(s->timer); 633 tsc210x_reset(s); 634 #ifdef TSC_VERBOSE 635 } else { 636 fprintf(stderr, "tsc2102_control_register_write: " 637 "wrong value written into RESET\n"); 638 #endif 639 } 640 return; 641 642 case 0x05: /* Configuration */ 643 s->timing = value & 0x3f; 644 #ifdef TSC_VERBOSE 645 if (value & ~0x3f) 646 fprintf(stderr, "tsc2102_control_register_write: " 647 "wrong value written into CONFIG\n"); 648 #endif 649 return; 650 651 case 0x06: /* Secondary configuration */ 652 if ((s->model & 0xff00) == 0x2100) 653 goto bad_reg; 654 s->kb.mode = value >> 14; 655 s->pll[2] = value & 0x3ffff; 656 return; 657 658 case 0x10: /* Keypad Mask */ 659 if ((s->model & 0xff00) == 0x2100) 660 goto bad_reg; 661 s->kb.mask = value; 662 return; 663 664 default: 665 bad_reg: 666 #ifdef TSC_VERBOSE 667 fprintf(stderr, "tsc2102_control_register_write: " 668 "no such register: 0x%02x\n", reg); 669 #endif 670 } 671 } 672 673 static void tsc2102_audio_register_write( 674 TSC210xState *s, int reg, uint16_t value) 675 { 676 switch (reg) { 677 case 0x00: /* Audio Control 1 */ 678 s->audio_ctrl1 = value & 0x0f3f; 679 #ifdef TSC_VERBOSE 680 if ((value & ~0x0f3f) || ((value & 7) != ((value >> 3) & 7))) 681 fprintf(stderr, "tsc2102_audio_register_write: " 682 "wrong value written into Audio 1\n"); 683 #endif 684 tsc2102_audio_rate_update(s); 685 tsc2102_audio_output_update(s); 686 return; 687 688 case 0x01: 689 #ifdef TSC_VERBOSE 690 if (value != 0xff00) 691 fprintf(stderr, "tsc2102_audio_register_write: " 692 "wrong value written into reg 0x01\n"); 693 #endif 694 return; 695 696 case 0x02: /* DAC Volume Control */ 697 s->volume = value; 698 s->volume_change = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 699 return; 700 701 case 0x03: 702 #ifdef TSC_VERBOSE 703 if (value != 0x8b00) 704 fprintf(stderr, "tsc2102_audio_register_write: " 705 "wrong value written into reg 0x03\n"); 706 #endif 707 return; 708 709 case 0x04: /* Audio Control 2 */ 710 s->audio_ctrl2 = value & 0xf7f2; 711 #ifdef TSC_VERBOSE 712 if (value & ~0xf7fd) 713 fprintf(stderr, "tsc2102_audio_register_write: " 714 "wrong value written into Audio 2\n"); 715 #endif 716 return; 717 718 case 0x05: /* Stereo DAC Power Control */ 719 if ((value & ~s->dac_power) & (1 << 10)) 720 s->powerdown = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 721 722 s->dac_power = value & 0x9543; 723 #ifdef TSC_VERBOSE 724 if ((value & ~0x9543) != 0x2aa0) 725 fprintf(stderr, "tsc2102_audio_register_write: " 726 "wrong value written into Power\n"); 727 #endif 728 tsc2102_audio_rate_update(s); 729 tsc2102_audio_output_update(s); 730 return; 731 732 case 0x06: /* Audio Control 3 */ 733 s->audio_ctrl3 &= 0x00c0; 734 s->audio_ctrl3 |= value & 0xf800; 735 #ifdef TSC_VERBOSE 736 if (value & ~0xf8c7) 737 fprintf(stderr, "tsc2102_audio_register_write: " 738 "wrong value written into Audio 3\n"); 739 #endif 740 tsc2102_audio_output_update(s); 741 return; 742 743 case 0x07: /* LCH_BASS_BOOST_N0 */ 744 case 0x08: /* LCH_BASS_BOOST_N1 */ 745 case 0x09: /* LCH_BASS_BOOST_N2 */ 746 case 0x0a: /* LCH_BASS_BOOST_N3 */ 747 case 0x0b: /* LCH_BASS_BOOST_N4 */ 748 case 0x0c: /* LCH_BASS_BOOST_N5 */ 749 case 0x0d: /* LCH_BASS_BOOST_D1 */ 750 case 0x0e: /* LCH_BASS_BOOST_D2 */ 751 case 0x0f: /* LCH_BASS_BOOST_D4 */ 752 case 0x10: /* LCH_BASS_BOOST_D5 */ 753 case 0x11: /* RCH_BASS_BOOST_N0 */ 754 case 0x12: /* RCH_BASS_BOOST_N1 */ 755 case 0x13: /* RCH_BASS_BOOST_N2 */ 756 case 0x14: /* RCH_BASS_BOOST_N3 */ 757 case 0x15: /* RCH_BASS_BOOST_N4 */ 758 case 0x16: /* RCH_BASS_BOOST_N5 */ 759 case 0x17: /* RCH_BASS_BOOST_D1 */ 760 case 0x18: /* RCH_BASS_BOOST_D2 */ 761 case 0x19: /* RCH_BASS_BOOST_D4 */ 762 case 0x1a: /* RCH_BASS_BOOST_D5 */ 763 s->filter_data[reg - 0x07] = value; 764 return; 765 766 case 0x1b: /* PLL Programmability 1 */ 767 s->pll[0] = value & 0xfffc; 768 #ifdef TSC_VERBOSE 769 if (value & ~0xfffc) 770 fprintf(stderr, "tsc2102_audio_register_write: " 771 "wrong value written into PLL 1\n"); 772 #endif 773 return; 774 775 case 0x1c: /* PLL Programmability 2 */ 776 s->pll[1] = value & 0xfffc; 777 #ifdef TSC_VERBOSE 778 if (value & ~0xfffc) 779 fprintf(stderr, "tsc2102_audio_register_write: " 780 "wrong value written into PLL 2\n"); 781 #endif 782 return; 783 784 case 0x1d: /* Audio Control 4 */ 785 s->softstep = !(value & 0x4000); 786 #ifdef TSC_VERBOSE 787 if (value & ~0x4000) 788 fprintf(stderr, "tsc2102_audio_register_write: " 789 "wrong value written into Audio 4\n"); 790 #endif 791 return; 792 793 default: 794 #ifdef TSC_VERBOSE 795 fprintf(stderr, "tsc2102_audio_register_write: " 796 "no such register: 0x%02x\n", reg); 797 #endif 798 } 799 } 800 801 /* This handles most of the chip logic. */ 802 static void tsc210x_pin_update(TSC210xState *s) 803 { 804 int64_t expires; 805 int pin_state; 806 807 switch (s->pin_func) { 808 case 0: 809 pin_state = s->pressure; 810 break; 811 case 1: 812 pin_state = !!s->dav; 813 break; 814 case 2: 815 default: 816 pin_state = s->pressure && !s->dav; 817 } 818 819 if (!s->enabled) 820 pin_state = 0; 821 822 if (pin_state != s->irq) { 823 s->irq = pin_state; 824 qemu_set_irq(s->pint, !s->irq); 825 } 826 827 switch (s->nextfunction) { 828 case TSC_MODE_XY_SCAN: 829 case TSC_MODE_XYZ_SCAN: 830 if (!s->pressure) 831 return; 832 break; 833 834 case TSC_MODE_X: 835 case TSC_MODE_Y: 836 case TSC_MODE_Z: 837 if (!s->pressure) 838 return; 839 /* Fall through */ 840 case TSC_MODE_BAT1: 841 case TSC_MODE_BAT2: 842 case TSC_MODE_AUX: 843 case TSC_MODE_TEMP1: 844 case TSC_MODE_TEMP2: 845 if (s->dav) 846 s->enabled = 0; 847 break; 848 849 case TSC_MODE_AUX_SCAN: 850 case TSC_MODE_PORT_SCAN: 851 break; 852 853 case TSC_MODE_NO_SCAN: 854 case TSC_MODE_XX_DRV: 855 case TSC_MODE_YY_DRV: 856 case TSC_MODE_YX_DRV: 857 default: 858 return; 859 } 860 861 if (!s->enabled || s->busy || s->dav) 862 return; 863 864 s->busy = 1; 865 s->precision = s->nextprecision; 866 s->function = s->nextfunction; 867 expires = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() >> 10); 868 timer_mod(s->timer, expires); 869 } 870 871 static uint16_t tsc210x_read(TSC210xState *s) 872 { 873 uint16_t ret = 0x0000; 874 875 if (!s->command) 876 fprintf(stderr, "tsc210x_read: SPI underrun!\n"); 877 878 switch (s->page) { 879 case TSC_DATA_REGISTERS_PAGE: 880 ret = tsc2102_data_register_read(s, s->offset); 881 if (!s->dav) 882 qemu_irq_raise(s->davint); 883 break; 884 case TSC_CONTROL_REGISTERS_PAGE: 885 ret = tsc2102_control_register_read(s, s->offset); 886 break; 887 case TSC_AUDIO_REGISTERS_PAGE: 888 ret = tsc2102_audio_register_read(s, s->offset); 889 break; 890 default: 891 hw_error("tsc210x_read: wrong memory page\n"); 892 } 893 894 tsc210x_pin_update(s); 895 896 /* Allow sequential reads. */ 897 s->offset ++; 898 s->state = 0; 899 return ret; 900 } 901 902 static void tsc210x_write(TSC210xState *s, uint16_t value) 903 { 904 /* 905 * This is a two-state state machine for reading 906 * command and data every second time. 907 */ 908 if (!s->state) { 909 s->command = value >> 15; 910 s->page = (value >> 11) & 0x0f; 911 s->offset = (value >> 5) & 0x3f; 912 s->state = 1; 913 } else { 914 if (s->command) 915 fprintf(stderr, "tsc210x_write: SPI overrun!\n"); 916 else 917 switch (s->page) { 918 case TSC_DATA_REGISTERS_PAGE: 919 tsc2102_data_register_write(s, s->offset, value); 920 break; 921 case TSC_CONTROL_REGISTERS_PAGE: 922 tsc2102_control_register_write(s, s->offset, value); 923 break; 924 case TSC_AUDIO_REGISTERS_PAGE: 925 tsc2102_audio_register_write(s, s->offset, value); 926 break; 927 default: 928 hw_error("tsc210x_write: wrong memory page\n"); 929 } 930 931 tsc210x_pin_update(s); 932 s->state = 0; 933 } 934 } 935 936 uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len) 937 { 938 TSC210xState *s = opaque; 939 uint32_t ret = 0; 940 941 if (len != 16) 942 hw_error("%s: FIXME: bad SPI word width %i\n", __FUNCTION__, len); 943 944 /* TODO: sequential reads etc - how do we make sure the host doesn't 945 * unintentionally read out a conversion result from a register while 946 * transmitting the command word of the next command? */ 947 if (!value || (s->state && s->command)) 948 ret = tsc210x_read(s); 949 if (value || (s->state && !s->command)) 950 tsc210x_write(s, value); 951 952 return ret; 953 } 954 955 static void tsc210x_timer_tick(void *opaque) 956 { 957 TSC210xState *s = opaque; 958 959 /* Timer ticked -- a set of conversions has been finished. */ 960 961 if (!s->busy) 962 return; 963 964 s->busy = 0; 965 s->dav |= mode_regs[s->function]; 966 tsc210x_pin_update(s); 967 qemu_irq_lower(s->davint); 968 } 969 970 static void tsc210x_touchscreen_event(void *opaque, 971 int x, int y, int z, int buttons_state) 972 { 973 TSC210xState *s = opaque; 974 int p = s->pressure; 975 976 if (buttons_state) { 977 s->x = x; 978 s->y = y; 979 } 980 s->pressure = !!buttons_state; 981 982 /* 983 * Note: We would get better responsiveness in the guest by 984 * signaling TS events immediately, but for now we simulate 985 * the first conversion delay for sake of correctness. 986 */ 987 if (p != s->pressure) 988 tsc210x_pin_update(s); 989 } 990 991 static void tsc210x_i2s_swallow(TSC210xState *s) 992 { 993 if (s->dac_voice[0]) 994 tsc210x_out_flush(s, s->codec.out.len); 995 else 996 s->codec.out.len = 0; 997 } 998 999 static void tsc210x_i2s_set_rate(TSC210xState *s, int in, int out) 1000 { 1001 s->i2s_tx_rate = out; 1002 s->i2s_rx_rate = in; 1003 } 1004 1005 static void tsc210x_save(QEMUFile *f, void *opaque) 1006 { 1007 TSC210xState *s = (TSC210xState *) opaque; 1008 int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 1009 int i; 1010 1011 qemu_put_be16(f, s->x); 1012 qemu_put_be16(f, s->y); 1013 qemu_put_byte(f, s->pressure); 1014 1015 qemu_put_byte(f, s->state); 1016 qemu_put_byte(f, s->page); 1017 qemu_put_byte(f, s->offset); 1018 qemu_put_byte(f, s->command); 1019 1020 qemu_put_byte(f, s->irq); 1021 qemu_put_be16s(f, &s->dav); 1022 1023 timer_put(f, s->timer); 1024 qemu_put_byte(f, s->enabled); 1025 qemu_put_byte(f, s->host_mode); 1026 qemu_put_byte(f, s->function); 1027 qemu_put_byte(f, s->nextfunction); 1028 qemu_put_byte(f, s->precision); 1029 qemu_put_byte(f, s->nextprecision); 1030 qemu_put_byte(f, s->filter); 1031 qemu_put_byte(f, s->pin_func); 1032 qemu_put_byte(f, s->ref); 1033 qemu_put_byte(f, s->timing); 1034 qemu_put_be32(f, s->noise); 1035 1036 qemu_put_be16s(f, &s->audio_ctrl1); 1037 qemu_put_be16s(f, &s->audio_ctrl2); 1038 qemu_put_be16s(f, &s->audio_ctrl3); 1039 qemu_put_be16s(f, &s->pll[0]); 1040 qemu_put_be16s(f, &s->pll[1]); 1041 qemu_put_be16s(f, &s->volume); 1042 qemu_put_sbe64(f, (s->volume_change - now)); 1043 qemu_put_sbe64(f, (s->powerdown - now)); 1044 qemu_put_byte(f, s->softstep); 1045 qemu_put_be16s(f, &s->dac_power); 1046 1047 for (i = 0; i < 0x14; i ++) 1048 qemu_put_be16s(f, &s->filter_data[i]); 1049 } 1050 1051 static int tsc210x_load(QEMUFile *f, void *opaque, int version_id) 1052 { 1053 TSC210xState *s = (TSC210xState *) opaque; 1054 int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 1055 int i; 1056 1057 s->x = qemu_get_be16(f); 1058 s->y = qemu_get_be16(f); 1059 s->pressure = qemu_get_byte(f); 1060 1061 s->state = qemu_get_byte(f); 1062 s->page = qemu_get_byte(f); 1063 s->offset = qemu_get_byte(f); 1064 s->command = qemu_get_byte(f); 1065 1066 s->irq = qemu_get_byte(f); 1067 qemu_get_be16s(f, &s->dav); 1068 1069 timer_get(f, s->timer); 1070 s->enabled = qemu_get_byte(f); 1071 s->host_mode = qemu_get_byte(f); 1072 s->function = qemu_get_byte(f); 1073 s->nextfunction = qemu_get_byte(f); 1074 s->precision = qemu_get_byte(f); 1075 s->nextprecision = qemu_get_byte(f); 1076 s->filter = qemu_get_byte(f); 1077 s->pin_func = qemu_get_byte(f); 1078 s->ref = qemu_get_byte(f); 1079 s->timing = qemu_get_byte(f); 1080 s->noise = qemu_get_be32(f); 1081 1082 qemu_get_be16s(f, &s->audio_ctrl1); 1083 qemu_get_be16s(f, &s->audio_ctrl2); 1084 qemu_get_be16s(f, &s->audio_ctrl3); 1085 qemu_get_be16s(f, &s->pll[0]); 1086 qemu_get_be16s(f, &s->pll[1]); 1087 qemu_get_be16s(f, &s->volume); 1088 s->volume_change = qemu_get_sbe64(f) + now; 1089 s->powerdown = qemu_get_sbe64(f) + now; 1090 s->softstep = qemu_get_byte(f); 1091 qemu_get_be16s(f, &s->dac_power); 1092 1093 for (i = 0; i < 0x14; i ++) 1094 qemu_get_be16s(f, &s->filter_data[i]); 1095 1096 s->busy = timer_pending(s->timer); 1097 qemu_set_irq(s->pint, !s->irq); 1098 qemu_set_irq(s->davint, !s->dav); 1099 1100 return 0; 1101 } 1102 1103 uWireSlave *tsc2102_init(qemu_irq pint) 1104 { 1105 TSC210xState *s; 1106 1107 s = (TSC210xState *) 1108 g_malloc0(sizeof(TSC210xState)); 1109 memset(s, 0, sizeof(TSC210xState)); 1110 s->x = 160; 1111 s->y = 160; 1112 s->pressure = 0; 1113 s->precision = s->nextprecision = 0; 1114 s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, tsc210x_timer_tick, s); 1115 s->pint = pint; 1116 s->model = 0x2102; 1117 s->name = "tsc2102"; 1118 1119 s->tr[0] = 0; 1120 s->tr[1] = 1; 1121 s->tr[2] = 1; 1122 s->tr[3] = 0; 1123 s->tr[4] = 1; 1124 s->tr[5] = 0; 1125 s->tr[6] = 1; 1126 s->tr[7] = 0; 1127 1128 s->chip.opaque = s; 1129 s->chip.send = (void *) tsc210x_write; 1130 s->chip.receive = (void *) tsc210x_read; 1131 1132 s->codec.opaque = s; 1133 s->codec.tx_swallow = (void *) tsc210x_i2s_swallow; 1134 s->codec.set_rate = (void *) tsc210x_i2s_set_rate; 1135 s->codec.in.fifo = s->in_fifo; 1136 s->codec.out.fifo = s->out_fifo; 1137 1138 tsc210x_reset(s); 1139 1140 qemu_add_mouse_event_handler(tsc210x_touchscreen_event, s, 1, 1141 "QEMU TSC2102-driven Touchscreen"); 1142 1143 AUD_register_card(s->name, &s->card); 1144 1145 qemu_register_reset((void *) tsc210x_reset, s); 1146 register_savevm(NULL, s->name, -1, 0, 1147 tsc210x_save, tsc210x_load, s); 1148 1149 return &s->chip; 1150 } 1151 1152 uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav) 1153 { 1154 TSC210xState *s; 1155 1156 s = (TSC210xState *) 1157 g_malloc0(sizeof(TSC210xState)); 1158 memset(s, 0, sizeof(TSC210xState)); 1159 s->x = 400; 1160 s->y = 240; 1161 s->pressure = 0; 1162 s->precision = s->nextprecision = 0; 1163 s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, tsc210x_timer_tick, s); 1164 s->pint = penirq; 1165 s->kbint = kbirq; 1166 s->davint = dav; 1167 s->model = 0x2301; 1168 s->name = "tsc2301"; 1169 1170 s->tr[0] = 0; 1171 s->tr[1] = 1; 1172 s->tr[2] = 1; 1173 s->tr[3] = 0; 1174 s->tr[4] = 1; 1175 s->tr[5] = 0; 1176 s->tr[6] = 1; 1177 s->tr[7] = 0; 1178 1179 s->chip.opaque = s; 1180 s->chip.send = (void *) tsc210x_write; 1181 s->chip.receive = (void *) tsc210x_read; 1182 1183 s->codec.opaque = s; 1184 s->codec.tx_swallow = (void *) tsc210x_i2s_swallow; 1185 s->codec.set_rate = (void *) tsc210x_i2s_set_rate; 1186 s->codec.in.fifo = s->in_fifo; 1187 s->codec.out.fifo = s->out_fifo; 1188 1189 tsc210x_reset(s); 1190 1191 qemu_add_mouse_event_handler(tsc210x_touchscreen_event, s, 1, 1192 "QEMU TSC2301-driven Touchscreen"); 1193 1194 AUD_register_card(s->name, &s->card); 1195 1196 qemu_register_reset((void *) tsc210x_reset, s); 1197 register_savevm(NULL, s->name, -1, 0, tsc210x_save, tsc210x_load, s); 1198 1199 return &s->chip; 1200 } 1201 1202 I2SCodec *tsc210x_codec(uWireSlave *chip) 1203 { 1204 TSC210xState *s = (TSC210xState *) chip->opaque; 1205 1206 return &s->codec; 1207 } 1208 1209 /* 1210 * Use tslib generated calibration data to generate ADC input values 1211 * from the touchscreen. Assuming 12-bit precision was used during 1212 * tslib calibration. 1213 */ 1214 void tsc210x_set_transform(uWireSlave *chip, 1215 MouseTransformInfo *info) 1216 { 1217 TSC210xState *s = (TSC210xState *) chip->opaque; 1218 #if 0 1219 int64_t ltr[8]; 1220 1221 ltr[0] = (int64_t) info->a[1] * info->y; 1222 ltr[1] = (int64_t) info->a[4] * info->x; 1223 ltr[2] = (int64_t) info->a[1] * info->a[3] - 1224 (int64_t) info->a[4] * info->a[0]; 1225 ltr[3] = (int64_t) info->a[2] * info->a[4] - 1226 (int64_t) info->a[5] * info->a[1]; 1227 ltr[4] = (int64_t) info->a[0] * info->y; 1228 ltr[5] = (int64_t) info->a[3] * info->x; 1229 ltr[6] = (int64_t) info->a[4] * info->a[0] - 1230 (int64_t) info->a[1] * info->a[3]; 1231 ltr[7] = (int64_t) info->a[2] * info->a[3] - 1232 (int64_t) info->a[5] * info->a[0]; 1233 1234 /* Avoid integer overflow */ 1235 s->tr[0] = ltr[0] >> 11; 1236 s->tr[1] = ltr[1] >> 11; 1237 s->tr[2] = muldiv64(ltr[2], 1, info->a[6]); 1238 s->tr[3] = muldiv64(ltr[3], 1 << 4, ltr[2]); 1239 s->tr[4] = ltr[4] >> 11; 1240 s->tr[5] = ltr[5] >> 11; 1241 s->tr[6] = muldiv64(ltr[6], 1, info->a[6]); 1242 s->tr[7] = muldiv64(ltr[7], 1 << 4, ltr[6]); 1243 #else 1244 1245 /* This version assumes touchscreen X & Y axis are parallel or 1246 * perpendicular to LCD's X & Y axis in some way. */ 1247 if (abs(info->a[0]) > abs(info->a[1])) { 1248 s->tr[0] = 0; 1249 s->tr[1] = -info->a[6] * info->x; 1250 s->tr[2] = info->a[0]; 1251 s->tr[3] = -info->a[2] / info->a[0]; 1252 s->tr[4] = info->a[6] * info->y; 1253 s->tr[5] = 0; 1254 s->tr[6] = info->a[4]; 1255 s->tr[7] = -info->a[5] / info->a[4]; 1256 } else { 1257 s->tr[0] = info->a[6] * info->y; 1258 s->tr[1] = 0; 1259 s->tr[2] = info->a[1]; 1260 s->tr[3] = -info->a[2] / info->a[1]; 1261 s->tr[4] = 0; 1262 s->tr[5] = -info->a[6] * info->x; 1263 s->tr[6] = info->a[3]; 1264 s->tr[7] = -info->a[5] / info->a[3]; 1265 } 1266 1267 s->tr[0] >>= 11; 1268 s->tr[1] >>= 11; 1269 s->tr[3] <<= 4; 1270 s->tr[4] >>= 11; 1271 s->tr[5] >>= 11; 1272 s->tr[7] <<= 4; 1273 #endif 1274 } 1275 1276 void tsc210x_key_event(uWireSlave *chip, int key, int down) 1277 { 1278 TSC210xState *s = (TSC210xState *) chip->opaque; 1279 1280 if (down) 1281 s->kb.down |= 1 << key; 1282 else 1283 s->kb.down &= ~(1 << key); 1284 1285 if (down && (s->kb.down & ~s->kb.mask) && !s->kb.intr) { 1286 s->kb.intr = 1; 1287 qemu_irq_lower(s->kbint); 1288 } else if (s->kb.intr && !(s->kb.down & ~s->kb.mask) && 1289 !(s->kb.mode & 1)) { 1290 s->kb.intr = 0; 1291 qemu_irq_raise(s->kbint); 1292 } 1293 } 1294