1 /* 2 * TI TSC2102 (touchscreen/sensors/audio controller) emulator. 3 * TI TSC2301 (touchscreen/sensors/keypad). 4 * 5 * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> 6 * Copyright (C) 2008 Nokia Corporation 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 or 11 * (at your option) version 3 of the License. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License along 19 * with this program; if not, see <http://www.gnu.org/licenses/>. 20 */ 21 22 #include "qemu/osdep.h" 23 #include "hw/hw.h" 24 #include "audio/audio.h" 25 #include "qemu/timer.h" 26 #include "ui/console.h" 27 #include "hw/arm/omap.h" /* For I2SCodec and uWireSlave */ 28 #include "hw/devices.h" 29 30 #define TSC_DATA_REGISTERS_PAGE 0x0 31 #define TSC_CONTROL_REGISTERS_PAGE 0x1 32 #define TSC_AUDIO_REGISTERS_PAGE 0x2 33 34 #define TSC_VERBOSE 35 36 #define TSC_CUT_RESOLUTION(value, p) ((value) >> (16 - resolution[p])) 37 38 typedef struct { 39 qemu_irq pint; 40 qemu_irq kbint; 41 qemu_irq davint; 42 QEMUTimer *timer; 43 QEMUSoundCard card; 44 uWireSlave chip; 45 I2SCodec codec; 46 uint8_t in_fifo[16384]; 47 uint8_t out_fifo[16384]; 48 uint16_t model; 49 50 int32_t x, y; 51 bool pressure; 52 53 uint8_t page, offset; 54 uint16_t dav; 55 56 bool state; 57 bool irq; 58 bool command; 59 bool busy; 60 bool enabled; 61 bool host_mode; 62 uint8_t function, nextfunction; 63 uint8_t precision, nextprecision; 64 uint8_t filter; 65 uint8_t pin_func; 66 uint8_t ref; 67 uint8_t timing; 68 uint8_t noise; 69 70 uint16_t audio_ctrl1; 71 uint16_t audio_ctrl2; 72 uint16_t audio_ctrl3; 73 uint16_t pll[3]; 74 uint16_t volume; 75 int64_t volume_change; 76 bool softstep; 77 uint16_t dac_power; 78 int64_t powerdown; 79 uint16_t filter_data[0x14]; 80 81 const char *name; 82 SWVoiceIn *adc_voice[1]; 83 SWVoiceOut *dac_voice[1]; 84 int i2s_rx_rate; 85 int i2s_tx_rate; 86 87 int tr[8]; 88 89 struct { 90 uint16_t down; 91 uint16_t mask; 92 int scan; 93 int debounce; 94 int mode; 95 int intr; 96 } kb; 97 int64_t now; /* Time at migration */ 98 } TSC210xState; 99 100 static const int resolution[4] = { 12, 8, 10, 12 }; 101 102 #define TSC_MODE_NO_SCAN 0x0 103 #define TSC_MODE_XY_SCAN 0x1 104 #define TSC_MODE_XYZ_SCAN 0x2 105 #define TSC_MODE_X 0x3 106 #define TSC_MODE_Y 0x4 107 #define TSC_MODE_Z 0x5 108 #define TSC_MODE_BAT1 0x6 109 #define TSC_MODE_BAT2 0x7 110 #define TSC_MODE_AUX 0x8 111 #define TSC_MODE_AUX_SCAN 0x9 112 #define TSC_MODE_TEMP1 0xa 113 #define TSC_MODE_PORT_SCAN 0xb 114 #define TSC_MODE_TEMP2 0xc 115 #define TSC_MODE_XX_DRV 0xd 116 #define TSC_MODE_YY_DRV 0xe 117 #define TSC_MODE_YX_DRV 0xf 118 119 static const uint16_t mode_regs[16] = { 120 0x0000, /* No scan */ 121 0x0600, /* X, Y scan */ 122 0x0780, /* X, Y, Z scan */ 123 0x0400, /* X */ 124 0x0200, /* Y */ 125 0x0180, /* Z */ 126 0x0040, /* BAT1 */ 127 0x0030, /* BAT2 */ 128 0x0010, /* AUX */ 129 0x0010, /* AUX scan */ 130 0x0004, /* TEMP1 */ 131 0x0070, /* Port scan */ 132 0x0002, /* TEMP2 */ 133 0x0000, /* X+, X- drivers */ 134 0x0000, /* Y+, Y- drivers */ 135 0x0000, /* Y+, X- drivers */ 136 }; 137 138 #define X_TRANSFORM(s) \ 139 ((s->y * s->tr[0] - s->x * s->tr[1]) / s->tr[2] + s->tr[3]) 140 #define Y_TRANSFORM(s) \ 141 ((s->y * s->tr[4] - s->x * s->tr[5]) / s->tr[6] + s->tr[7]) 142 #define Z1_TRANSFORM(s) \ 143 ((400 - ((s)->x >> 7) + ((s)->pressure << 10)) << 4) 144 #define Z2_TRANSFORM(s) \ 145 ((4000 + ((s)->y >> 7) - ((s)->pressure << 10)) << 4) 146 147 #define BAT1_VAL 0x8660 148 #define BAT2_VAL 0x0000 149 #define AUX1_VAL 0x35c0 150 #define AUX2_VAL 0xffff 151 #define TEMP1_VAL 0x8c70 152 #define TEMP2_VAL 0xa5b0 153 154 #define TSC_POWEROFF_DELAY 50 155 #define TSC_SOFTSTEP_DELAY 50 156 157 static void tsc210x_reset(TSC210xState *s) 158 { 159 s->state = false; 160 s->pin_func = 2; 161 s->enabled = false; 162 s->busy = false; 163 s->nextfunction = 0; 164 s->ref = 0; 165 s->timing = 0; 166 s->irq = false; 167 s->dav = 0; 168 169 s->audio_ctrl1 = 0x0000; 170 s->audio_ctrl2 = 0x4410; 171 s->audio_ctrl3 = 0x0000; 172 s->pll[0] = 0x1004; 173 s->pll[1] = 0x0000; 174 s->pll[2] = 0x1fff; 175 s->volume = 0xffff; 176 s->dac_power = 0x8540; 177 s->softstep = true; 178 s->volume_change = 0; 179 s->powerdown = 0; 180 s->filter_data[0x00] = 0x6be3; 181 s->filter_data[0x01] = 0x9666; 182 s->filter_data[0x02] = 0x675d; 183 s->filter_data[0x03] = 0x6be3; 184 s->filter_data[0x04] = 0x9666; 185 s->filter_data[0x05] = 0x675d; 186 s->filter_data[0x06] = 0x7d83; 187 s->filter_data[0x07] = 0x84ee; 188 s->filter_data[0x08] = 0x7d83; 189 s->filter_data[0x09] = 0x84ee; 190 s->filter_data[0x0a] = 0x6be3; 191 s->filter_data[0x0b] = 0x9666; 192 s->filter_data[0x0c] = 0x675d; 193 s->filter_data[0x0d] = 0x6be3; 194 s->filter_data[0x0e] = 0x9666; 195 s->filter_data[0x0f] = 0x675d; 196 s->filter_data[0x10] = 0x7d83; 197 s->filter_data[0x11] = 0x84ee; 198 s->filter_data[0x12] = 0x7d83; 199 s->filter_data[0x13] = 0x84ee; 200 201 s->i2s_tx_rate = 0; 202 s->i2s_rx_rate = 0; 203 204 s->kb.scan = 1; 205 s->kb.debounce = 0; 206 s->kb.mask = 0x0000; 207 s->kb.mode = 3; 208 s->kb.intr = 0; 209 210 qemu_set_irq(s->pint, !s->irq); 211 qemu_set_irq(s->davint, !s->dav); 212 qemu_irq_raise(s->kbint); 213 } 214 215 typedef struct { 216 int rate; 217 int dsor; 218 int fsref; 219 } TSC210xRateInfo; 220 221 /* { rate, dsor, fsref } */ 222 static const TSC210xRateInfo tsc2102_rates[] = { 223 /* Fsref / 6.0 */ 224 { 7350, 63, 1 }, 225 { 8000, 63, 0 }, 226 /* Fsref / 6.0 */ 227 { 7350, 54, 1 }, 228 { 8000, 54, 0 }, 229 /* Fsref / 5.0 */ 230 { 8820, 45, 1 }, 231 { 9600, 45, 0 }, 232 /* Fsref / 4.0 */ 233 { 11025, 36, 1 }, 234 { 12000, 36, 0 }, 235 /* Fsref / 3.0 */ 236 { 14700, 27, 1 }, 237 { 16000, 27, 0 }, 238 /* Fsref / 2.0 */ 239 { 22050, 18, 1 }, 240 { 24000, 18, 0 }, 241 /* Fsref / 1.5 */ 242 { 29400, 9, 1 }, 243 { 32000, 9, 0 }, 244 /* Fsref */ 245 { 44100, 0, 1 }, 246 { 48000, 0, 0 }, 247 248 { 0, 0, 0 }, 249 }; 250 251 static inline void tsc210x_out_flush(TSC210xState *s, int len) 252 { 253 uint8_t *data = s->codec.out.fifo + s->codec.out.start; 254 uint8_t *end = data + len; 255 256 while (data < end) 257 data += AUD_write(s->dac_voice[0], data, end - data) ?: (end - data); 258 259 s->codec.out.len -= len; 260 if (s->codec.out.len) 261 memmove(s->codec.out.fifo, end, s->codec.out.len); 262 s->codec.out.start = 0; 263 } 264 265 static void tsc210x_audio_out_cb(TSC210xState *s, int free_b) 266 { 267 if (s->codec.out.len >= free_b) { 268 tsc210x_out_flush(s, free_b); 269 return; 270 } 271 272 s->codec.out.size = MIN(free_b, 16384); 273 qemu_irq_raise(s->codec.tx_start); 274 } 275 276 static void tsc2102_audio_rate_update(TSC210xState *s) 277 { 278 const TSC210xRateInfo *rate; 279 280 s->codec.tx_rate = 0; 281 s->codec.rx_rate = 0; 282 if (s->dac_power & (1 << 15)) /* PWDNC */ 283 return; 284 285 for (rate = tsc2102_rates; rate->rate; rate ++) 286 if (rate->dsor == (s->audio_ctrl1 & 0x3f) && /* DACFS */ 287 rate->fsref == ((s->audio_ctrl3 >> 13) & 1))/* REFFS */ 288 break; 289 if (!rate->rate) { 290 printf("%s: unknown sampling rate configured\n", __func__); 291 return; 292 } 293 294 s->codec.tx_rate = rate->rate; 295 } 296 297 static void tsc2102_audio_output_update(TSC210xState *s) 298 { 299 int enable; 300 struct audsettings fmt; 301 302 if (s->dac_voice[0]) { 303 tsc210x_out_flush(s, s->codec.out.len); 304 s->codec.out.size = 0; 305 AUD_set_active_out(s->dac_voice[0], 0); 306 AUD_close_out(&s->card, s->dac_voice[0]); 307 s->dac_voice[0] = NULL; 308 } 309 s->codec.cts = 0; 310 311 enable = 312 (~s->dac_power & (1 << 15)) && /* PWDNC */ 313 (~s->dac_power & (1 << 10)); /* DAPWDN */ 314 if (!enable || !s->codec.tx_rate) 315 return; 316 317 /* Force our own sampling rate even in slave DAC mode */ 318 fmt.endianness = 0; 319 fmt.nchannels = 2; 320 fmt.freq = s->codec.tx_rate; 321 fmt.fmt = AUD_FMT_S16; 322 323 s->dac_voice[0] = AUD_open_out(&s->card, s->dac_voice[0], 324 "tsc2102.sink", s, (void *) tsc210x_audio_out_cb, &fmt); 325 if (s->dac_voice[0]) { 326 s->codec.cts = 1; 327 AUD_set_active_out(s->dac_voice[0], 1); 328 } 329 } 330 331 static uint16_t tsc2102_data_register_read(TSC210xState *s, int reg) 332 { 333 switch (reg) { 334 case 0x00: /* X */ 335 s->dav &= 0xfbff; 336 return TSC_CUT_RESOLUTION(X_TRANSFORM(s), s->precision) + 337 (s->noise & 3); 338 339 case 0x01: /* Y */ 340 s->noise ++; 341 s->dav &= 0xfdff; 342 return TSC_CUT_RESOLUTION(Y_TRANSFORM(s), s->precision) ^ 343 (s->noise & 3); 344 345 case 0x02: /* Z1 */ 346 s->dav &= 0xfeff; 347 return TSC_CUT_RESOLUTION(Z1_TRANSFORM(s), s->precision) - 348 (s->noise & 3); 349 350 case 0x03: /* Z2 */ 351 s->dav &= 0xff7f; 352 return TSC_CUT_RESOLUTION(Z2_TRANSFORM(s), s->precision) | 353 (s->noise & 3); 354 355 case 0x04: /* KPData */ 356 if ((s->model & 0xff00) == 0x2300) { 357 if (s->kb.intr && (s->kb.mode & 2)) { 358 s->kb.intr = 0; 359 qemu_irq_raise(s->kbint); 360 } 361 return s->kb.down; 362 } 363 364 return 0xffff; 365 366 case 0x05: /* BAT1 */ 367 s->dav &= 0xffbf; 368 return TSC_CUT_RESOLUTION(BAT1_VAL, s->precision) + 369 (s->noise & 6); 370 371 case 0x06: /* BAT2 */ 372 s->dav &= 0xffdf; 373 return TSC_CUT_RESOLUTION(BAT2_VAL, s->precision); 374 375 case 0x07: /* AUX1 */ 376 s->dav &= 0xffef; 377 return TSC_CUT_RESOLUTION(AUX1_VAL, s->precision); 378 379 case 0x08: /* AUX2 */ 380 s->dav &= 0xfff7; 381 return 0xffff; 382 383 case 0x09: /* TEMP1 */ 384 s->dav &= 0xfffb; 385 return TSC_CUT_RESOLUTION(TEMP1_VAL, s->precision) - 386 (s->noise & 5); 387 388 case 0x0a: /* TEMP2 */ 389 s->dav &= 0xfffd; 390 return TSC_CUT_RESOLUTION(TEMP2_VAL, s->precision) ^ 391 (s->noise & 3); 392 393 case 0x0b: /* DAC */ 394 s->dav &= 0xfffe; 395 return 0xffff; 396 397 default: 398 #ifdef TSC_VERBOSE 399 fprintf(stderr, "tsc2102_data_register_read: " 400 "no such register: 0x%02x\n", reg); 401 #endif 402 return 0xffff; 403 } 404 } 405 406 static uint16_t tsc2102_control_register_read( 407 TSC210xState *s, int reg) 408 { 409 switch (reg) { 410 case 0x00: /* TSC ADC */ 411 return (s->pressure << 15) | ((!s->busy) << 14) | 412 (s->nextfunction << 10) | (s->nextprecision << 8) | s->filter; 413 414 case 0x01: /* Status / Keypad Control */ 415 if ((s->model & 0xff00) == 0x2100) 416 return (s->pin_func << 14) | ((!s->enabled) << 13) | 417 (s->host_mode << 12) | ((!!s->dav) << 11) | s->dav; 418 else 419 return (s->kb.intr << 15) | ((s->kb.scan || !s->kb.down) << 14) | 420 (s->kb.debounce << 11); 421 422 case 0x02: /* DAC Control */ 423 if ((s->model & 0xff00) == 0x2300) 424 return s->dac_power & 0x8000; 425 else 426 goto bad_reg; 427 428 case 0x03: /* Reference */ 429 return s->ref; 430 431 case 0x04: /* Reset */ 432 return 0xffff; 433 434 case 0x05: /* Configuration */ 435 return s->timing; 436 437 case 0x06: /* Secondary configuration */ 438 if ((s->model & 0xff00) == 0x2100) 439 goto bad_reg; 440 return ((!s->dav) << 15) | ((s->kb.mode & 1) << 14) | s->pll[2]; 441 442 case 0x10: /* Keypad Mask */ 443 if ((s->model & 0xff00) == 0x2100) 444 goto bad_reg; 445 return s->kb.mask; 446 447 default: 448 bad_reg: 449 #ifdef TSC_VERBOSE 450 fprintf(stderr, "tsc2102_control_register_read: " 451 "no such register: 0x%02x\n", reg); 452 #endif 453 return 0xffff; 454 } 455 } 456 457 static uint16_t tsc2102_audio_register_read(TSC210xState *s, int reg) 458 { 459 int l_ch, r_ch; 460 uint16_t val; 461 462 switch (reg) { 463 case 0x00: /* Audio Control 1 */ 464 return s->audio_ctrl1; 465 466 case 0x01: 467 return 0xff00; 468 469 case 0x02: /* DAC Volume Control */ 470 return s->volume; 471 472 case 0x03: 473 return 0x8b00; 474 475 case 0x04: /* Audio Control 2 */ 476 l_ch = 1; 477 r_ch = 1; 478 if (s->softstep && !(s->dac_power & (1 << 10))) { 479 l_ch = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) > 480 s->volume_change + TSC_SOFTSTEP_DELAY); 481 r_ch = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) > 482 s->volume_change + TSC_SOFTSTEP_DELAY); 483 } 484 485 return s->audio_ctrl2 | (l_ch << 3) | (r_ch << 2); 486 487 case 0x05: /* Stereo DAC Power Control */ 488 return 0x2aa0 | s->dac_power | 489 (((s->dac_power & (1 << 10)) && 490 (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) > 491 s->powerdown + TSC_POWEROFF_DELAY)) << 6); 492 493 case 0x06: /* Audio Control 3 */ 494 val = s->audio_ctrl3 | 0x0001; 495 s->audio_ctrl3 &= 0xff3f; 496 return val; 497 498 case 0x07: /* LCH_BASS_BOOST_N0 */ 499 case 0x08: /* LCH_BASS_BOOST_N1 */ 500 case 0x09: /* LCH_BASS_BOOST_N2 */ 501 case 0x0a: /* LCH_BASS_BOOST_N3 */ 502 case 0x0b: /* LCH_BASS_BOOST_N4 */ 503 case 0x0c: /* LCH_BASS_BOOST_N5 */ 504 case 0x0d: /* LCH_BASS_BOOST_D1 */ 505 case 0x0e: /* LCH_BASS_BOOST_D2 */ 506 case 0x0f: /* LCH_BASS_BOOST_D4 */ 507 case 0x10: /* LCH_BASS_BOOST_D5 */ 508 case 0x11: /* RCH_BASS_BOOST_N0 */ 509 case 0x12: /* RCH_BASS_BOOST_N1 */ 510 case 0x13: /* RCH_BASS_BOOST_N2 */ 511 case 0x14: /* RCH_BASS_BOOST_N3 */ 512 case 0x15: /* RCH_BASS_BOOST_N4 */ 513 case 0x16: /* RCH_BASS_BOOST_N5 */ 514 case 0x17: /* RCH_BASS_BOOST_D1 */ 515 case 0x18: /* RCH_BASS_BOOST_D2 */ 516 case 0x19: /* RCH_BASS_BOOST_D4 */ 517 case 0x1a: /* RCH_BASS_BOOST_D5 */ 518 return s->filter_data[reg - 0x07]; 519 520 case 0x1b: /* PLL Programmability 1 */ 521 return s->pll[0]; 522 523 case 0x1c: /* PLL Programmability 2 */ 524 return s->pll[1]; 525 526 case 0x1d: /* Audio Control 4 */ 527 return (!s->softstep) << 14; 528 529 default: 530 #ifdef TSC_VERBOSE 531 fprintf(stderr, "tsc2102_audio_register_read: " 532 "no such register: 0x%02x\n", reg); 533 #endif 534 return 0xffff; 535 } 536 } 537 538 static void tsc2102_data_register_write( 539 TSC210xState *s, int reg, uint16_t value) 540 { 541 switch (reg) { 542 case 0x00: /* X */ 543 case 0x01: /* Y */ 544 case 0x02: /* Z1 */ 545 case 0x03: /* Z2 */ 546 case 0x05: /* BAT1 */ 547 case 0x06: /* BAT2 */ 548 case 0x07: /* AUX1 */ 549 case 0x08: /* AUX2 */ 550 case 0x09: /* TEMP1 */ 551 case 0x0a: /* TEMP2 */ 552 return; 553 554 default: 555 #ifdef TSC_VERBOSE 556 fprintf(stderr, "tsc2102_data_register_write: " 557 "no such register: 0x%02x\n", reg); 558 #endif 559 } 560 } 561 562 static void tsc2102_control_register_write( 563 TSC210xState *s, int reg, uint16_t value) 564 { 565 switch (reg) { 566 case 0x00: /* TSC ADC */ 567 s->host_mode = value >> 15; 568 s->enabled = !(value & 0x4000); 569 if (s->busy && !s->enabled) 570 timer_del(s->timer); 571 s->busy = s->busy && s->enabled; 572 s->nextfunction = (value >> 10) & 0xf; 573 s->nextprecision = (value >> 8) & 3; 574 s->filter = value & 0xff; 575 return; 576 577 case 0x01: /* Status / Keypad Control */ 578 if ((s->model & 0xff00) == 0x2100) 579 s->pin_func = value >> 14; 580 else { 581 s->kb.scan = (value >> 14) & 1; 582 s->kb.debounce = (value >> 11) & 7; 583 if (s->kb.intr && s->kb.scan) { 584 s->kb.intr = 0; 585 qemu_irq_raise(s->kbint); 586 } 587 } 588 return; 589 590 case 0x02: /* DAC Control */ 591 if ((s->model & 0xff00) == 0x2300) { 592 s->dac_power &= 0x7fff; 593 s->dac_power |= 0x8000 & value; 594 } else 595 goto bad_reg; 596 break; 597 598 case 0x03: /* Reference */ 599 s->ref = value & 0x1f; 600 return; 601 602 case 0x04: /* Reset */ 603 if (value == 0xbb00) { 604 if (s->busy) 605 timer_del(s->timer); 606 tsc210x_reset(s); 607 #ifdef TSC_VERBOSE 608 } else { 609 fprintf(stderr, "tsc2102_control_register_write: " 610 "wrong value written into RESET\n"); 611 #endif 612 } 613 return; 614 615 case 0x05: /* Configuration */ 616 s->timing = value & 0x3f; 617 #ifdef TSC_VERBOSE 618 if (value & ~0x3f) 619 fprintf(stderr, "tsc2102_control_register_write: " 620 "wrong value written into CONFIG\n"); 621 #endif 622 return; 623 624 case 0x06: /* Secondary configuration */ 625 if ((s->model & 0xff00) == 0x2100) 626 goto bad_reg; 627 s->kb.mode = value >> 14; 628 s->pll[2] = value & 0x3ffff; 629 return; 630 631 case 0x10: /* Keypad Mask */ 632 if ((s->model & 0xff00) == 0x2100) 633 goto bad_reg; 634 s->kb.mask = value; 635 return; 636 637 default: 638 bad_reg: 639 #ifdef TSC_VERBOSE 640 fprintf(stderr, "tsc2102_control_register_write: " 641 "no such register: 0x%02x\n", reg); 642 #endif 643 } 644 } 645 646 static void tsc2102_audio_register_write( 647 TSC210xState *s, int reg, uint16_t value) 648 { 649 switch (reg) { 650 case 0x00: /* Audio Control 1 */ 651 s->audio_ctrl1 = value & 0x0f3f; 652 #ifdef TSC_VERBOSE 653 if ((value & ~0x0f3f) || ((value & 7) != ((value >> 3) & 7))) 654 fprintf(stderr, "tsc2102_audio_register_write: " 655 "wrong value written into Audio 1\n"); 656 #endif 657 tsc2102_audio_rate_update(s); 658 tsc2102_audio_output_update(s); 659 return; 660 661 case 0x01: 662 #ifdef TSC_VERBOSE 663 if (value != 0xff00) 664 fprintf(stderr, "tsc2102_audio_register_write: " 665 "wrong value written into reg 0x01\n"); 666 #endif 667 return; 668 669 case 0x02: /* DAC Volume Control */ 670 s->volume = value; 671 s->volume_change = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 672 return; 673 674 case 0x03: 675 #ifdef TSC_VERBOSE 676 if (value != 0x8b00) 677 fprintf(stderr, "tsc2102_audio_register_write: " 678 "wrong value written into reg 0x03\n"); 679 #endif 680 return; 681 682 case 0x04: /* Audio Control 2 */ 683 s->audio_ctrl2 = value & 0xf7f2; 684 #ifdef TSC_VERBOSE 685 if (value & ~0xf7fd) 686 fprintf(stderr, "tsc2102_audio_register_write: " 687 "wrong value written into Audio 2\n"); 688 #endif 689 return; 690 691 case 0x05: /* Stereo DAC Power Control */ 692 if ((value & ~s->dac_power) & (1 << 10)) 693 s->powerdown = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 694 695 s->dac_power = value & 0x9543; 696 #ifdef TSC_VERBOSE 697 if ((value & ~0x9543) != 0x2aa0) 698 fprintf(stderr, "tsc2102_audio_register_write: " 699 "wrong value written into Power\n"); 700 #endif 701 tsc2102_audio_rate_update(s); 702 tsc2102_audio_output_update(s); 703 return; 704 705 case 0x06: /* Audio Control 3 */ 706 s->audio_ctrl3 &= 0x00c0; 707 s->audio_ctrl3 |= value & 0xf800; 708 #ifdef TSC_VERBOSE 709 if (value & ~0xf8c7) 710 fprintf(stderr, "tsc2102_audio_register_write: " 711 "wrong value written into Audio 3\n"); 712 #endif 713 tsc2102_audio_output_update(s); 714 return; 715 716 case 0x07: /* LCH_BASS_BOOST_N0 */ 717 case 0x08: /* LCH_BASS_BOOST_N1 */ 718 case 0x09: /* LCH_BASS_BOOST_N2 */ 719 case 0x0a: /* LCH_BASS_BOOST_N3 */ 720 case 0x0b: /* LCH_BASS_BOOST_N4 */ 721 case 0x0c: /* LCH_BASS_BOOST_N5 */ 722 case 0x0d: /* LCH_BASS_BOOST_D1 */ 723 case 0x0e: /* LCH_BASS_BOOST_D2 */ 724 case 0x0f: /* LCH_BASS_BOOST_D4 */ 725 case 0x10: /* LCH_BASS_BOOST_D5 */ 726 case 0x11: /* RCH_BASS_BOOST_N0 */ 727 case 0x12: /* RCH_BASS_BOOST_N1 */ 728 case 0x13: /* RCH_BASS_BOOST_N2 */ 729 case 0x14: /* RCH_BASS_BOOST_N3 */ 730 case 0x15: /* RCH_BASS_BOOST_N4 */ 731 case 0x16: /* RCH_BASS_BOOST_N5 */ 732 case 0x17: /* RCH_BASS_BOOST_D1 */ 733 case 0x18: /* RCH_BASS_BOOST_D2 */ 734 case 0x19: /* RCH_BASS_BOOST_D4 */ 735 case 0x1a: /* RCH_BASS_BOOST_D5 */ 736 s->filter_data[reg - 0x07] = value; 737 return; 738 739 case 0x1b: /* PLL Programmability 1 */ 740 s->pll[0] = value & 0xfffc; 741 #ifdef TSC_VERBOSE 742 if (value & ~0xfffc) 743 fprintf(stderr, "tsc2102_audio_register_write: " 744 "wrong value written into PLL 1\n"); 745 #endif 746 return; 747 748 case 0x1c: /* PLL Programmability 2 */ 749 s->pll[1] = value & 0xfffc; 750 #ifdef TSC_VERBOSE 751 if (value & ~0xfffc) 752 fprintf(stderr, "tsc2102_audio_register_write: " 753 "wrong value written into PLL 2\n"); 754 #endif 755 return; 756 757 case 0x1d: /* Audio Control 4 */ 758 s->softstep = !(value & 0x4000); 759 #ifdef TSC_VERBOSE 760 if (value & ~0x4000) 761 fprintf(stderr, "tsc2102_audio_register_write: " 762 "wrong value written into Audio 4\n"); 763 #endif 764 return; 765 766 default: 767 #ifdef TSC_VERBOSE 768 fprintf(stderr, "tsc2102_audio_register_write: " 769 "no such register: 0x%02x\n", reg); 770 #endif 771 } 772 } 773 774 /* This handles most of the chip logic. */ 775 static void tsc210x_pin_update(TSC210xState *s) 776 { 777 int64_t expires; 778 bool pin_state; 779 780 switch (s->pin_func) { 781 case 0: 782 pin_state = s->pressure; 783 break; 784 case 1: 785 pin_state = !!s->dav; 786 break; 787 case 2: 788 default: 789 pin_state = s->pressure && !s->dav; 790 } 791 792 if (!s->enabled) 793 pin_state = false; 794 795 if (pin_state != s->irq) { 796 s->irq = pin_state; 797 qemu_set_irq(s->pint, !s->irq); 798 } 799 800 switch (s->nextfunction) { 801 case TSC_MODE_XY_SCAN: 802 case TSC_MODE_XYZ_SCAN: 803 if (!s->pressure) 804 return; 805 break; 806 807 case TSC_MODE_X: 808 case TSC_MODE_Y: 809 case TSC_MODE_Z: 810 if (!s->pressure) 811 return; 812 /* Fall through */ 813 case TSC_MODE_BAT1: 814 case TSC_MODE_BAT2: 815 case TSC_MODE_AUX: 816 case TSC_MODE_TEMP1: 817 case TSC_MODE_TEMP2: 818 if (s->dav) 819 s->enabled = false; 820 break; 821 822 case TSC_MODE_AUX_SCAN: 823 case TSC_MODE_PORT_SCAN: 824 break; 825 826 case TSC_MODE_NO_SCAN: 827 case TSC_MODE_XX_DRV: 828 case TSC_MODE_YY_DRV: 829 case TSC_MODE_YX_DRV: 830 default: 831 return; 832 } 833 834 if (!s->enabled || s->busy || s->dav) 835 return; 836 837 s->busy = true; 838 s->precision = s->nextprecision; 839 s->function = s->nextfunction; 840 expires = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 841 (NANOSECONDS_PER_SECOND >> 10); 842 timer_mod(s->timer, expires); 843 } 844 845 static uint16_t tsc210x_read(TSC210xState *s) 846 { 847 uint16_t ret = 0x0000; 848 849 if (!s->command) 850 fprintf(stderr, "tsc210x_read: SPI underrun!\n"); 851 852 switch (s->page) { 853 case TSC_DATA_REGISTERS_PAGE: 854 ret = tsc2102_data_register_read(s, s->offset); 855 if (!s->dav) 856 qemu_irq_raise(s->davint); 857 break; 858 case TSC_CONTROL_REGISTERS_PAGE: 859 ret = tsc2102_control_register_read(s, s->offset); 860 break; 861 case TSC_AUDIO_REGISTERS_PAGE: 862 ret = tsc2102_audio_register_read(s, s->offset); 863 break; 864 default: 865 hw_error("tsc210x_read: wrong memory page\n"); 866 } 867 868 tsc210x_pin_update(s); 869 870 /* Allow sequential reads. */ 871 s->offset ++; 872 s->state = false; 873 return ret; 874 } 875 876 static void tsc210x_write(TSC210xState *s, uint16_t value) 877 { 878 /* 879 * This is a two-state state machine for reading 880 * command and data every second time. 881 */ 882 if (!s->state) { 883 s->command = (value >> 15) != 0; 884 s->page = (value >> 11) & 0x0f; 885 s->offset = (value >> 5) & 0x3f; 886 s->state = true; 887 } else { 888 if (s->command) 889 fprintf(stderr, "tsc210x_write: SPI overrun!\n"); 890 else 891 switch (s->page) { 892 case TSC_DATA_REGISTERS_PAGE: 893 tsc2102_data_register_write(s, s->offset, value); 894 break; 895 case TSC_CONTROL_REGISTERS_PAGE: 896 tsc2102_control_register_write(s, s->offset, value); 897 break; 898 case TSC_AUDIO_REGISTERS_PAGE: 899 tsc2102_audio_register_write(s, s->offset, value); 900 break; 901 default: 902 hw_error("tsc210x_write: wrong memory page\n"); 903 } 904 905 tsc210x_pin_update(s); 906 s->state = false; 907 } 908 } 909 910 uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len) 911 { 912 TSC210xState *s = opaque; 913 uint32_t ret = 0; 914 915 if (len != 16) 916 hw_error("%s: FIXME: bad SPI word width %i\n", __func__, len); 917 918 /* TODO: sequential reads etc - how do we make sure the host doesn't 919 * unintentionally read out a conversion result from a register while 920 * transmitting the command word of the next command? */ 921 if (!value || (s->state && s->command)) 922 ret = tsc210x_read(s); 923 if (value || (s->state && !s->command)) 924 tsc210x_write(s, value); 925 926 return ret; 927 } 928 929 static void tsc210x_timer_tick(void *opaque) 930 { 931 TSC210xState *s = opaque; 932 933 /* Timer ticked -- a set of conversions has been finished. */ 934 935 if (!s->busy) 936 return; 937 938 s->busy = false; 939 s->dav |= mode_regs[s->function]; 940 tsc210x_pin_update(s); 941 qemu_irq_lower(s->davint); 942 } 943 944 static void tsc210x_touchscreen_event(void *opaque, 945 int x, int y, int z, int buttons_state) 946 { 947 TSC210xState *s = opaque; 948 int p = s->pressure; 949 950 if (buttons_state) { 951 s->x = x; 952 s->y = y; 953 } 954 s->pressure = !!buttons_state; 955 956 /* 957 * Note: We would get better responsiveness in the guest by 958 * signaling TS events immediately, but for now we simulate 959 * the first conversion delay for sake of correctness. 960 */ 961 if (p != s->pressure) 962 tsc210x_pin_update(s); 963 } 964 965 static void tsc210x_i2s_swallow(TSC210xState *s) 966 { 967 if (s->dac_voice[0]) 968 tsc210x_out_flush(s, s->codec.out.len); 969 else 970 s->codec.out.len = 0; 971 } 972 973 static void tsc210x_i2s_set_rate(TSC210xState *s, int in, int out) 974 { 975 s->i2s_tx_rate = out; 976 s->i2s_rx_rate = in; 977 } 978 979 static int tsc210x_pre_save(void *opaque) 980 { 981 TSC210xState *s = (TSC210xState *) opaque; 982 s->now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 983 984 return 0; 985 } 986 987 static int tsc210x_post_load(void *opaque, int version_id) 988 { 989 TSC210xState *s = (TSC210xState *) opaque; 990 int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); 991 992 if (s->function >= ARRAY_SIZE(mode_regs)) { 993 return -EINVAL; 994 } 995 if (s->nextfunction >= ARRAY_SIZE(mode_regs)) { 996 return -EINVAL; 997 } 998 if (s->precision >= ARRAY_SIZE(resolution)) { 999 return -EINVAL; 1000 } 1001 if (s->nextprecision >= ARRAY_SIZE(resolution)) { 1002 return -EINVAL; 1003 } 1004 1005 s->volume_change -= s->now; 1006 s->volume_change += now; 1007 s->powerdown -= s->now; 1008 s->powerdown += now; 1009 1010 s->busy = timer_pending(s->timer); 1011 qemu_set_irq(s->pint, !s->irq); 1012 qemu_set_irq(s->davint, !s->dav); 1013 1014 return 0; 1015 } 1016 1017 static VMStateField vmstatefields_tsc210x[] = { 1018 VMSTATE_BOOL(enabled, TSC210xState), 1019 VMSTATE_BOOL(host_mode, TSC210xState), 1020 VMSTATE_BOOL(irq, TSC210xState), 1021 VMSTATE_BOOL(command, TSC210xState), 1022 VMSTATE_BOOL(pressure, TSC210xState), 1023 VMSTATE_BOOL(softstep, TSC210xState), 1024 VMSTATE_BOOL(state, TSC210xState), 1025 VMSTATE_UINT16(dav, TSC210xState), 1026 VMSTATE_INT32(x, TSC210xState), 1027 VMSTATE_INT32(y, TSC210xState), 1028 VMSTATE_UINT8(offset, TSC210xState), 1029 VMSTATE_UINT8(page, TSC210xState), 1030 VMSTATE_UINT8(filter, TSC210xState), 1031 VMSTATE_UINT8(pin_func, TSC210xState), 1032 VMSTATE_UINT8(ref, TSC210xState), 1033 VMSTATE_UINT8(timing, TSC210xState), 1034 VMSTATE_UINT8(noise, TSC210xState), 1035 VMSTATE_UINT8(function, TSC210xState), 1036 VMSTATE_UINT8(nextfunction, TSC210xState), 1037 VMSTATE_UINT8(precision, TSC210xState), 1038 VMSTATE_UINT8(nextprecision, TSC210xState), 1039 VMSTATE_UINT16(audio_ctrl1, TSC210xState), 1040 VMSTATE_UINT16(audio_ctrl2, TSC210xState), 1041 VMSTATE_UINT16(audio_ctrl3, TSC210xState), 1042 VMSTATE_UINT16_ARRAY(pll, TSC210xState, 3), 1043 VMSTATE_UINT16(volume, TSC210xState), 1044 VMSTATE_UINT16(dac_power, TSC210xState), 1045 VMSTATE_INT64(volume_change, TSC210xState), 1046 VMSTATE_INT64(powerdown, TSC210xState), 1047 VMSTATE_INT64(now, TSC210xState), 1048 VMSTATE_UINT16_ARRAY(filter_data, TSC210xState, 0x14), 1049 VMSTATE_TIMER_PTR(timer, TSC210xState), 1050 VMSTATE_END_OF_LIST() 1051 }; 1052 1053 static const VMStateDescription vmstate_tsc2102 = { 1054 .name = "tsc2102", 1055 .version_id = 1, 1056 .minimum_version_id = 1, 1057 .pre_save = tsc210x_pre_save, 1058 .post_load = tsc210x_post_load, 1059 .fields = vmstatefields_tsc210x, 1060 }; 1061 1062 static const VMStateDescription vmstate_tsc2301 = { 1063 .name = "tsc2301", 1064 .version_id = 1, 1065 .minimum_version_id = 1, 1066 .pre_save = tsc210x_pre_save, 1067 .post_load = tsc210x_post_load, 1068 .fields = vmstatefields_tsc210x, 1069 }; 1070 1071 uWireSlave *tsc2102_init(qemu_irq pint) 1072 { 1073 TSC210xState *s; 1074 1075 s = g_new0(TSC210xState, 1); 1076 s->x = 160; 1077 s->y = 160; 1078 s->pressure = 0; 1079 s->precision = s->nextprecision = 0; 1080 s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, tsc210x_timer_tick, s); 1081 s->pint = pint; 1082 s->model = 0x2102; 1083 s->name = "tsc2102"; 1084 1085 s->tr[0] = 0; 1086 s->tr[1] = 1; 1087 s->tr[2] = 1; 1088 s->tr[3] = 0; 1089 s->tr[4] = 1; 1090 s->tr[5] = 0; 1091 s->tr[6] = 1; 1092 s->tr[7] = 0; 1093 1094 s->chip.opaque = s; 1095 s->chip.send = (void *) tsc210x_write; 1096 s->chip.receive = (void *) tsc210x_read; 1097 1098 s->codec.opaque = s; 1099 s->codec.tx_swallow = (void *) tsc210x_i2s_swallow; 1100 s->codec.set_rate = (void *) tsc210x_i2s_set_rate; 1101 s->codec.in.fifo = s->in_fifo; 1102 s->codec.out.fifo = s->out_fifo; 1103 1104 tsc210x_reset(s); 1105 1106 qemu_add_mouse_event_handler(tsc210x_touchscreen_event, s, 1, 1107 "QEMU TSC2102-driven Touchscreen"); 1108 1109 AUD_register_card(s->name, &s->card); 1110 1111 qemu_register_reset((void *) tsc210x_reset, s); 1112 vmstate_register(NULL, 0, &vmstate_tsc2102, s); 1113 1114 return &s->chip; 1115 } 1116 1117 uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav) 1118 { 1119 TSC210xState *s; 1120 1121 s = g_new0(TSC210xState, 1); 1122 s->x = 400; 1123 s->y = 240; 1124 s->pressure = 0; 1125 s->precision = s->nextprecision = 0; 1126 s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, tsc210x_timer_tick, s); 1127 s->pint = penirq; 1128 s->kbint = kbirq; 1129 s->davint = dav; 1130 s->model = 0x2301; 1131 s->name = "tsc2301"; 1132 1133 s->tr[0] = 0; 1134 s->tr[1] = 1; 1135 s->tr[2] = 1; 1136 s->tr[3] = 0; 1137 s->tr[4] = 1; 1138 s->tr[5] = 0; 1139 s->tr[6] = 1; 1140 s->tr[7] = 0; 1141 1142 s->chip.opaque = s; 1143 s->chip.send = (void *) tsc210x_write; 1144 s->chip.receive = (void *) tsc210x_read; 1145 1146 s->codec.opaque = s; 1147 s->codec.tx_swallow = (void *) tsc210x_i2s_swallow; 1148 s->codec.set_rate = (void *) tsc210x_i2s_set_rate; 1149 s->codec.in.fifo = s->in_fifo; 1150 s->codec.out.fifo = s->out_fifo; 1151 1152 tsc210x_reset(s); 1153 1154 qemu_add_mouse_event_handler(tsc210x_touchscreen_event, s, 1, 1155 "QEMU TSC2301-driven Touchscreen"); 1156 1157 AUD_register_card(s->name, &s->card); 1158 1159 qemu_register_reset((void *) tsc210x_reset, s); 1160 vmstate_register(NULL, 0, &vmstate_tsc2301, s); 1161 1162 return &s->chip; 1163 } 1164 1165 I2SCodec *tsc210x_codec(uWireSlave *chip) 1166 { 1167 TSC210xState *s = (TSC210xState *) chip->opaque; 1168 1169 return &s->codec; 1170 } 1171 1172 /* 1173 * Use tslib generated calibration data to generate ADC input values 1174 * from the touchscreen. Assuming 12-bit precision was used during 1175 * tslib calibration. 1176 */ 1177 void tsc210x_set_transform(uWireSlave *chip, 1178 MouseTransformInfo *info) 1179 { 1180 TSC210xState *s = (TSC210xState *) chip->opaque; 1181 #if 0 1182 int64_t ltr[8]; 1183 1184 ltr[0] = (int64_t) info->a[1] * info->y; 1185 ltr[1] = (int64_t) info->a[4] * info->x; 1186 ltr[2] = (int64_t) info->a[1] * info->a[3] - 1187 (int64_t) info->a[4] * info->a[0]; 1188 ltr[3] = (int64_t) info->a[2] * info->a[4] - 1189 (int64_t) info->a[5] * info->a[1]; 1190 ltr[4] = (int64_t) info->a[0] * info->y; 1191 ltr[5] = (int64_t) info->a[3] * info->x; 1192 ltr[6] = (int64_t) info->a[4] * info->a[0] - 1193 (int64_t) info->a[1] * info->a[3]; 1194 ltr[7] = (int64_t) info->a[2] * info->a[3] - 1195 (int64_t) info->a[5] * info->a[0]; 1196 1197 /* Avoid integer overflow */ 1198 s->tr[0] = ltr[0] >> 11; 1199 s->tr[1] = ltr[1] >> 11; 1200 s->tr[2] = muldiv64(ltr[2], 1, info->a[6]); 1201 s->tr[3] = muldiv64(ltr[3], 1 << 4, ltr[2]); 1202 s->tr[4] = ltr[4] >> 11; 1203 s->tr[5] = ltr[5] >> 11; 1204 s->tr[6] = muldiv64(ltr[6], 1, info->a[6]); 1205 s->tr[7] = muldiv64(ltr[7], 1 << 4, ltr[6]); 1206 #else 1207 1208 /* This version assumes touchscreen X & Y axis are parallel or 1209 * perpendicular to LCD's X & Y axis in some way. */ 1210 if (abs(info->a[0]) > abs(info->a[1])) { 1211 s->tr[0] = 0; 1212 s->tr[1] = -info->a[6] * info->x; 1213 s->tr[2] = info->a[0]; 1214 s->tr[3] = -info->a[2] / info->a[0]; 1215 s->tr[4] = info->a[6] * info->y; 1216 s->tr[5] = 0; 1217 s->tr[6] = info->a[4]; 1218 s->tr[7] = -info->a[5] / info->a[4]; 1219 } else { 1220 s->tr[0] = info->a[6] * info->y; 1221 s->tr[1] = 0; 1222 s->tr[2] = info->a[1]; 1223 s->tr[3] = -info->a[2] / info->a[1]; 1224 s->tr[4] = 0; 1225 s->tr[5] = -info->a[6] * info->x; 1226 s->tr[6] = info->a[3]; 1227 s->tr[7] = -info->a[5] / info->a[3]; 1228 } 1229 1230 s->tr[0] >>= 11; 1231 s->tr[1] >>= 11; 1232 s->tr[3] <<= 4; 1233 s->tr[4] >>= 11; 1234 s->tr[5] >>= 11; 1235 s->tr[7] <<= 4; 1236 #endif 1237 } 1238 1239 void tsc210x_key_event(uWireSlave *chip, int key, int down) 1240 { 1241 TSC210xState *s = (TSC210xState *) chip->opaque; 1242 1243 if (down) 1244 s->kb.down |= 1 << key; 1245 else 1246 s->kb.down &= ~(1 << key); 1247 1248 if (down && (s->kb.down & ~s->kb.mask) && !s->kb.intr) { 1249 s->kb.intr = 1; 1250 qemu_irq_lower(s->kbint); 1251 } else if (s->kb.intr && !(s->kb.down & ~s->kb.mask) && 1252 !(s->kb.mode & 1)) { 1253 s->kb.intr = 0; 1254 qemu_irq_raise(s->kbint); 1255 } 1256 } 1257