xref: /openbmc/qemu/hw/input/pl050.c (revision f7160f32)
1 /*
2  * Arm PrimeCell PL050 Keyboard / Mouse Interface
3  *
4  * Copyright (c) 2006-2007 CodeSourcery.
5  * Written by Paul Brook
6  *
7  * This code is licensed under the GPL.
8  */
9 
10 #include "qemu/osdep.h"
11 #include "hw/sysbus.h"
12 #include "migration/vmstate.h"
13 #include "hw/input/ps2.h"
14 #include "hw/irq.h"
15 #include "qemu/log.h"
16 #include "qemu/module.h"
17 
18 #define TYPE_PL050 "pl050"
19 #define PL050(obj) OBJECT_CHECK(PL050State, (obj), TYPE_PL050)
20 
21 typedef struct PL050State {
22     SysBusDevice parent_obj;
23 
24     MemoryRegion iomem;
25     void *dev;
26     uint32_t cr;
27     uint32_t clk;
28     uint32_t last;
29     int pending;
30     qemu_irq irq;
31     bool is_mouse;
32 } PL050State;
33 
34 static const VMStateDescription vmstate_pl050 = {
35     .name = "pl050",
36     .version_id = 2,
37     .minimum_version_id = 2,
38     .fields = (VMStateField[]) {
39         VMSTATE_UINT32(cr, PL050State),
40         VMSTATE_UINT32(clk, PL050State),
41         VMSTATE_UINT32(last, PL050State),
42         VMSTATE_INT32(pending, PL050State),
43         VMSTATE_END_OF_LIST()
44     }
45 };
46 
47 #define PL050_TXEMPTY         (1 << 6)
48 #define PL050_TXBUSY          (1 << 5)
49 #define PL050_RXFULL          (1 << 4)
50 #define PL050_RXBUSY          (1 << 3)
51 #define PL050_RXPARITY        (1 << 2)
52 #define PL050_KMIC            (1 << 1)
53 #define PL050_KMID            (1 << 0)
54 
55 static const unsigned char pl050_id[] =
56 { 0x50, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
57 
58 static void pl050_update(void *opaque, int level)
59 {
60     PL050State *s = (PL050State *)opaque;
61     int raise;
62 
63     s->pending = level;
64     raise = (s->pending && (s->cr & 0x10) != 0)
65             || (s->cr & 0x08) != 0;
66     qemu_set_irq(s->irq, raise);
67 }
68 
69 static uint64_t pl050_read(void *opaque, hwaddr offset,
70                            unsigned size)
71 {
72     PL050State *s = (PL050State *)opaque;
73     if (offset >= 0xfe0 && offset < 0x1000)
74         return pl050_id[(offset - 0xfe0) >> 2];
75 
76     switch (offset >> 2) {
77     case 0: /* KMICR */
78         return s->cr;
79     case 1: /* KMISTAT */
80         {
81             uint8_t val;
82             uint32_t stat;
83 
84             val = s->last;
85             val = val ^ (val >> 4);
86             val = val ^ (val >> 2);
87             val = (val ^ (val >> 1)) & 1;
88 
89             stat = PL050_TXEMPTY;
90             if (val)
91                 stat |= PL050_RXPARITY;
92             if (s->pending)
93                 stat |= PL050_RXFULL;
94 
95             return stat;
96         }
97     case 2: /* KMIDATA */
98         if (s->pending)
99             s->last = ps2_read_data(s->dev);
100         return s->last;
101     case 3: /* KMICLKDIV */
102         return s->clk;
103     case 4: /* KMIIR */
104         return s->pending | 2;
105     default:
106         qemu_log_mask(LOG_GUEST_ERROR,
107                       "pl050_read: Bad offset %x\n", (int)offset);
108         return 0;
109     }
110 }
111 
112 static void pl050_write(void *opaque, hwaddr offset,
113                         uint64_t value, unsigned size)
114 {
115     PL050State *s = (PL050State *)opaque;
116     switch (offset >> 2) {
117     case 0: /* KMICR */
118         s->cr = value;
119         pl050_update(s, s->pending);
120         /* ??? Need to implement the enable/disable bit.  */
121         break;
122     case 2: /* KMIDATA */
123         /* ??? This should toggle the TX interrupt line.  */
124         /* ??? This means kbd/mouse can block each other.  */
125         if (s->is_mouse) {
126             ps2_write_mouse(s->dev, value);
127         } else {
128             ps2_write_keyboard(s->dev, value);
129         }
130         break;
131     case 3: /* KMICLKDIV */
132         s->clk = value;
133         return;
134     default:
135         qemu_log_mask(LOG_GUEST_ERROR,
136                       "pl050_write: Bad offset %x\n", (int)offset);
137     }
138 }
139 static const MemoryRegionOps pl050_ops = {
140     .read = pl050_read,
141     .write = pl050_write,
142     .endianness = DEVICE_NATIVE_ENDIAN,
143 };
144 
145 static void pl050_realize(DeviceState *dev, Error **errp)
146 {
147     PL050State *s = PL050(dev);
148     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
149 
150     memory_region_init_io(&s->iomem, OBJECT(s), &pl050_ops, s, "pl050", 0x1000);
151     sysbus_init_mmio(sbd, &s->iomem);
152     sysbus_init_irq(sbd, &s->irq);
153     if (s->is_mouse) {
154         s->dev = ps2_mouse_init(pl050_update, s);
155     } else {
156         s->dev = ps2_kbd_init(pl050_update, s);
157     }
158 }
159 
160 static void pl050_keyboard_init(Object *obj)
161 {
162     PL050State *s = PL050(obj);
163 
164     s->is_mouse = false;
165 }
166 
167 static void pl050_mouse_init(Object *obj)
168 {
169     PL050State *s = PL050(obj);
170 
171     s->is_mouse = true;
172 }
173 
174 static const TypeInfo pl050_kbd_info = {
175     .name          = "pl050_keyboard",
176     .parent        = TYPE_PL050,
177     .instance_init = pl050_keyboard_init,
178 };
179 
180 static const TypeInfo pl050_mouse_info = {
181     .name          = "pl050_mouse",
182     .parent        = TYPE_PL050,
183     .instance_init = pl050_mouse_init,
184 };
185 
186 static void pl050_class_init(ObjectClass *oc, void *data)
187 {
188     DeviceClass *dc = DEVICE_CLASS(oc);
189 
190     dc->realize = pl050_realize;
191     dc->vmsd = &vmstate_pl050;
192 }
193 
194 static const TypeInfo pl050_type_info = {
195     .name          = TYPE_PL050,
196     .parent        = TYPE_SYS_BUS_DEVICE,
197     .instance_size = sizeof(PL050State),
198     .abstract      = true,
199     .class_init    = pl050_class_init,
200 };
201 
202 static void pl050_register_types(void)
203 {
204     type_register_static(&pl050_type_info);
205     type_register_static(&pl050_kbd_info);
206     type_register_static(&pl050_mouse_info);
207 }
208 
209 type_init(pl050_register_types)
210