xref: /openbmc/qemu/hw/input/pl050.c (revision a6caeee8)
1 /*
2  * Arm PrimeCell PL050 Keyboard / Mouse Interface
3  *
4  * Copyright (c) 2006-2007 CodeSourcery.
5  * Written by Paul Brook
6  *
7  * This code is licensed under the GPL.
8  */
9 
10 #include "qemu/osdep.h"
11 #include "hw/sysbus.h"
12 #include "migration/vmstate.h"
13 #include "hw/input/ps2.h"
14 #include "hw/irq.h"
15 #include "qemu/log.h"
16 #include "qemu/module.h"
17 #include "qom/object.h"
18 
19 #define TYPE_PL050 "pl050"
20 OBJECT_DECLARE_SIMPLE_TYPE(PL050State, PL050)
21 
22 struct PL050State {
23     SysBusDevice parent_obj;
24 
25     MemoryRegion iomem;
26     void *dev;
27     uint32_t cr;
28     uint32_t clk;
29     uint32_t last;
30     int pending;
31     qemu_irq irq;
32     bool is_mouse;
33 };
34 
35 static const VMStateDescription vmstate_pl050 = {
36     .name = "pl050",
37     .version_id = 2,
38     .minimum_version_id = 2,
39     .fields = (VMStateField[]) {
40         VMSTATE_UINT32(cr, PL050State),
41         VMSTATE_UINT32(clk, PL050State),
42         VMSTATE_UINT32(last, PL050State),
43         VMSTATE_INT32(pending, PL050State),
44         VMSTATE_END_OF_LIST()
45     }
46 };
47 
48 #define PL050_TXEMPTY         (1 << 6)
49 #define PL050_TXBUSY          (1 << 5)
50 #define PL050_RXFULL          (1 << 4)
51 #define PL050_RXBUSY          (1 << 3)
52 #define PL050_RXPARITY        (1 << 2)
53 #define PL050_KMIC            (1 << 1)
54 #define PL050_KMID            (1 << 0)
55 
56 static const unsigned char pl050_id[] =
57 { 0x50, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
58 
59 static void pl050_update(void *opaque, int level)
60 {
61     PL050State *s = (PL050State *)opaque;
62     int raise;
63 
64     s->pending = level;
65     raise = (s->pending && (s->cr & 0x10) != 0)
66             || (s->cr & 0x08) != 0;
67     qemu_set_irq(s->irq, raise);
68 }
69 
70 static uint64_t pl050_read(void *opaque, hwaddr offset,
71                            unsigned size)
72 {
73     PL050State *s = (PL050State *)opaque;
74     if (offset >= 0xfe0 && offset < 0x1000)
75         return pl050_id[(offset - 0xfe0) >> 2];
76 
77     switch (offset >> 2) {
78     case 0: /* KMICR */
79         return s->cr;
80     case 1: /* KMISTAT */
81         {
82             uint8_t val;
83             uint32_t stat;
84 
85             val = s->last;
86             val = val ^ (val >> 4);
87             val = val ^ (val >> 2);
88             val = (val ^ (val >> 1)) & 1;
89 
90             stat = PL050_TXEMPTY;
91             if (val)
92                 stat |= PL050_RXPARITY;
93             if (s->pending)
94                 stat |= PL050_RXFULL;
95 
96             return stat;
97         }
98     case 2: /* KMIDATA */
99         if (s->pending)
100             s->last = ps2_read_data(s->dev);
101         return s->last;
102     case 3: /* KMICLKDIV */
103         return s->clk;
104     case 4: /* KMIIR */
105         return s->pending | 2;
106     default:
107         qemu_log_mask(LOG_GUEST_ERROR,
108                       "pl050_read: Bad offset %x\n", (int)offset);
109         return 0;
110     }
111 }
112 
113 static void pl050_write(void *opaque, hwaddr offset,
114                         uint64_t value, unsigned size)
115 {
116     PL050State *s = (PL050State *)opaque;
117     switch (offset >> 2) {
118     case 0: /* KMICR */
119         s->cr = value;
120         pl050_update(s, s->pending);
121         /* ??? Need to implement the enable/disable bit.  */
122         break;
123     case 2: /* KMIDATA */
124         /* ??? This should toggle the TX interrupt line.  */
125         /* ??? This means kbd/mouse can block each other.  */
126         if (s->is_mouse) {
127             ps2_write_mouse(s->dev, value);
128         } else {
129             ps2_write_keyboard(s->dev, value);
130         }
131         break;
132     case 3: /* KMICLKDIV */
133         s->clk = value;
134         return;
135     default:
136         qemu_log_mask(LOG_GUEST_ERROR,
137                       "pl050_write: Bad offset %x\n", (int)offset);
138     }
139 }
140 static const MemoryRegionOps pl050_ops = {
141     .read = pl050_read,
142     .write = pl050_write,
143     .endianness = DEVICE_NATIVE_ENDIAN,
144 };
145 
146 static void pl050_realize(DeviceState *dev, Error **errp)
147 {
148     PL050State *s = PL050(dev);
149     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
150 
151     memory_region_init_io(&s->iomem, OBJECT(s), &pl050_ops, s, "pl050", 0x1000);
152     sysbus_init_mmio(sbd, &s->iomem);
153     sysbus_init_irq(sbd, &s->irq);
154     if (s->is_mouse) {
155         s->dev = ps2_mouse_init(pl050_update, s);
156     } else {
157         s->dev = ps2_kbd_init(pl050_update, s);
158     }
159 }
160 
161 static void pl050_keyboard_init(Object *obj)
162 {
163     PL050State *s = PL050(obj);
164 
165     s->is_mouse = false;
166 }
167 
168 static void pl050_mouse_init(Object *obj)
169 {
170     PL050State *s = PL050(obj);
171 
172     s->is_mouse = true;
173 }
174 
175 static const TypeInfo pl050_kbd_info = {
176     .name          = "pl050_keyboard",
177     .parent        = TYPE_PL050,
178     .instance_init = pl050_keyboard_init,
179 };
180 
181 static const TypeInfo pl050_mouse_info = {
182     .name          = "pl050_mouse",
183     .parent        = TYPE_PL050,
184     .instance_init = pl050_mouse_init,
185 };
186 
187 static void pl050_class_init(ObjectClass *oc, void *data)
188 {
189     DeviceClass *dc = DEVICE_CLASS(oc);
190 
191     dc->realize = pl050_realize;
192     dc->vmsd = &vmstate_pl050;
193 }
194 
195 static const TypeInfo pl050_type_info = {
196     .name          = TYPE_PL050,
197     .parent        = TYPE_SYS_BUS_DEVICE,
198     .instance_size = sizeof(PL050State),
199     .abstract      = true,
200     .class_init    = pl050_class_init,
201 };
202 
203 static void pl050_register_types(void)
204 {
205     type_register_static(&pl050_type_info);
206     type_register_static(&pl050_kbd_info);
207     type_register_static(&pl050_mouse_info);
208 }
209 
210 type_init(pl050_register_types)
211