1 /* 2 * QEMU PC keyboard emulation 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "qemu/log.h" 27 #include "hw/isa/isa.h" 28 #include "migration/vmstate.h" 29 #include "hw/acpi/aml-build.h" 30 #include "hw/input/ps2.h" 31 #include "hw/irq.h" 32 #include "hw/input/i8042.h" 33 #include "sysemu/reset.h" 34 #include "sysemu/runstate.h" 35 36 #include "trace.h" 37 38 /* Keyboard Controller Commands */ 39 #define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */ 40 #define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */ 41 #define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */ 42 #define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */ 43 #define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */ 44 #define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */ 45 #define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */ 46 #define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */ 47 #define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */ 48 #define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */ 49 #define KBD_CCMD_READ_INPORT 0xC0 /* read input port */ 50 #define KBD_CCMD_READ_OUTPORT 0xD0 /* read output port */ 51 #define KBD_CCMD_WRITE_OUTPORT 0xD1 /* write output port */ 52 #define KBD_CCMD_WRITE_OBUF 0xD2 53 #define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if 54 initiated by the auxiliary device */ 55 #define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */ 56 #define KBD_CCMD_DISABLE_A20 0xDD /* HP vectra only ? */ 57 #define KBD_CCMD_ENABLE_A20 0xDF /* HP vectra only ? */ 58 #define KBD_CCMD_PULSE_BITS_3_0 0xF0 /* Pulse bits 3-0 of the output port P2. */ 59 #define KBD_CCMD_RESET 0xFE /* Pulse bit 0 of the output port P2 = CPU reset. */ 60 #define KBD_CCMD_NO_OP 0xFF /* Pulse no bits of the output port P2. */ 61 62 /* Keyboard Commands */ 63 #define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */ 64 #define KBD_CMD_ECHO 0xEE 65 #define KBD_CMD_GET_ID 0xF2 /* get keyboard ID */ 66 #define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */ 67 #define KBD_CMD_ENABLE 0xF4 /* Enable scanning */ 68 #define KBD_CMD_RESET_DISABLE 0xF5 /* reset and disable scanning */ 69 #define KBD_CMD_RESET_ENABLE 0xF6 /* reset and enable scanning */ 70 #define KBD_CMD_RESET 0xFF /* Reset */ 71 72 /* Keyboard Replies */ 73 #define KBD_REPLY_POR 0xAA /* Power on reset */ 74 #define KBD_REPLY_ACK 0xFA /* Command ACK */ 75 #define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */ 76 77 /* Status Register Bits */ 78 #define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ 79 #define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */ 80 #define KBD_STAT_SELFTEST 0x04 /* Self test successful */ 81 #define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */ 82 #define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */ 83 #define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ 84 #define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */ 85 #define KBD_STAT_PERR 0x80 /* Parity error */ 86 87 /* Controller Mode Register Bits */ 88 #define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */ 89 #define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */ 90 #define KBD_MODE_SYS 0x04 /* The system flag (?) */ 91 #define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */ 92 #define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */ 93 #define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */ 94 #define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */ 95 #define KBD_MODE_RFU 0x80 96 97 /* Output Port Bits */ 98 #define KBD_OUT_RESET 0x01 /* 1=normal mode, 0=reset */ 99 #define KBD_OUT_A20 0x02 /* x86 only */ 100 #define KBD_OUT_OBF 0x10 /* Keyboard output buffer full */ 101 #define KBD_OUT_MOUSE_OBF 0x20 /* Mouse output buffer full */ 102 103 /* OSes typically write 0xdd/0xdf to turn the A20 line off and on. 104 * We make the default value of the outport include these four bits, 105 * so that the subsection is rarely necessary. 106 */ 107 #define KBD_OUT_ONES 0xcc 108 109 /* Mouse Commands */ 110 #define AUX_SET_SCALE11 0xE6 /* Set 1:1 scaling */ 111 #define AUX_SET_SCALE21 0xE7 /* Set 2:1 scaling */ 112 #define AUX_SET_RES 0xE8 /* Set resolution */ 113 #define AUX_GET_SCALE 0xE9 /* Get scaling factor */ 114 #define AUX_SET_STREAM 0xEA /* Set stream mode */ 115 #define AUX_POLL 0xEB /* Poll */ 116 #define AUX_RESET_WRAP 0xEC /* Reset wrap mode */ 117 #define AUX_SET_WRAP 0xEE /* Set wrap mode */ 118 #define AUX_SET_REMOTE 0xF0 /* Set remote mode */ 119 #define AUX_GET_TYPE 0xF2 /* Get type */ 120 #define AUX_SET_SAMPLE 0xF3 /* Set sample rate */ 121 #define AUX_ENABLE_DEV 0xF4 /* Enable aux device */ 122 #define AUX_DISABLE_DEV 0xF5 /* Disable aux device */ 123 #define AUX_SET_DEFAULT 0xF6 124 #define AUX_RESET 0xFF /* Reset aux device */ 125 #define AUX_ACK 0xFA /* Command byte ACK. */ 126 127 #define MOUSE_STATUS_REMOTE 0x40 128 #define MOUSE_STATUS_ENABLED 0x20 129 #define MOUSE_STATUS_SCALE21 0x10 130 131 #define KBD_PENDING_KBD 1 132 #define KBD_PENDING_AUX 2 133 134 typedef struct KBDState { 135 uint8_t write_cmd; /* if non zero, write data to port 60 is expected */ 136 uint8_t status; 137 uint8_t mode; 138 uint8_t outport; 139 bool outport_present; 140 /* Bitmask of devices with data available. */ 141 uint8_t pending; 142 void *kbd; 143 void *mouse; 144 145 qemu_irq irq_kbd; 146 qemu_irq irq_mouse; 147 qemu_irq a20_out; 148 hwaddr mask; 149 } KBDState; 150 151 /* update irq and KBD_STAT_[MOUSE_]OBF */ 152 /* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be 153 incorrect, but it avoids having to simulate exact delays */ 154 static void kbd_update_irq(KBDState *s) 155 { 156 int irq_kbd_level, irq_mouse_level; 157 158 irq_kbd_level = 0; 159 irq_mouse_level = 0; 160 s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF); 161 s->outport &= ~(KBD_OUT_OBF | KBD_OUT_MOUSE_OBF); 162 if (s->pending) { 163 s->status |= KBD_STAT_OBF; 164 s->outport |= KBD_OUT_OBF; 165 /* kbd data takes priority over aux data. */ 166 if (s->pending == KBD_PENDING_AUX) { 167 s->status |= KBD_STAT_MOUSE_OBF; 168 s->outport |= KBD_OUT_MOUSE_OBF; 169 if (s->mode & KBD_MODE_MOUSE_INT) 170 irq_mouse_level = 1; 171 } else { 172 if ((s->mode & KBD_MODE_KBD_INT) && 173 !(s->mode & KBD_MODE_DISABLE_KBD)) 174 irq_kbd_level = 1; 175 } 176 } 177 qemu_set_irq(s->irq_kbd, irq_kbd_level); 178 qemu_set_irq(s->irq_mouse, irq_mouse_level); 179 } 180 181 static void kbd_update_kbd_irq(void *opaque, int level) 182 { 183 KBDState *s = (KBDState *)opaque; 184 185 if (level) 186 s->pending |= KBD_PENDING_KBD; 187 else 188 s->pending &= ~KBD_PENDING_KBD; 189 kbd_update_irq(s); 190 } 191 192 static void kbd_update_aux_irq(void *opaque, int level) 193 { 194 KBDState *s = (KBDState *)opaque; 195 196 if (level) 197 s->pending |= KBD_PENDING_AUX; 198 else 199 s->pending &= ~KBD_PENDING_AUX; 200 kbd_update_irq(s); 201 } 202 203 static uint64_t kbd_read_status(void *opaque, hwaddr addr, 204 unsigned size) 205 { 206 KBDState *s = opaque; 207 int val; 208 val = s->status; 209 trace_pckbd_kbd_read_status(val); 210 return val; 211 } 212 213 static void kbd_queue(KBDState *s, int b, int aux) 214 { 215 if (aux) 216 ps2_queue(s->mouse, b); 217 else 218 ps2_queue(s->kbd, b); 219 } 220 221 static void outport_write(KBDState *s, uint32_t val) 222 { 223 trace_pckbd_outport_write(val); 224 s->outport = val; 225 qemu_set_irq(s->a20_out, (val >> 1) & 1); 226 if (!(val & 1)) { 227 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 228 } 229 } 230 231 static void kbd_write_command(void *opaque, hwaddr addr, 232 uint64_t val, unsigned size) 233 { 234 KBDState *s = opaque; 235 236 trace_pckbd_kbd_write_command(val); 237 238 /* Bits 3-0 of the output port P2 of the keyboard controller may be pulsed 239 * low for approximately 6 micro seconds. Bits 3-0 of the KBD_CCMD_PULSE 240 * command specify the output port bits to be pulsed. 241 * 0: Bit should be pulsed. 1: Bit should not be modified. 242 * The only useful version of this command is pulsing bit 0, 243 * which does a CPU reset. 244 */ 245 if((val & KBD_CCMD_PULSE_BITS_3_0) == KBD_CCMD_PULSE_BITS_3_0) { 246 if(!(val & 1)) 247 val = KBD_CCMD_RESET; 248 else 249 val = KBD_CCMD_NO_OP; 250 } 251 252 switch(val) { 253 case KBD_CCMD_READ_MODE: 254 kbd_queue(s, s->mode, 0); 255 break; 256 case KBD_CCMD_WRITE_MODE: 257 case KBD_CCMD_WRITE_OBUF: 258 case KBD_CCMD_WRITE_AUX_OBUF: 259 case KBD_CCMD_WRITE_MOUSE: 260 case KBD_CCMD_WRITE_OUTPORT: 261 s->write_cmd = val; 262 break; 263 case KBD_CCMD_MOUSE_DISABLE: 264 s->mode |= KBD_MODE_DISABLE_MOUSE; 265 break; 266 case KBD_CCMD_MOUSE_ENABLE: 267 s->mode &= ~KBD_MODE_DISABLE_MOUSE; 268 break; 269 case KBD_CCMD_TEST_MOUSE: 270 kbd_queue(s, 0x00, 0); 271 break; 272 case KBD_CCMD_SELF_TEST: 273 s->status |= KBD_STAT_SELFTEST; 274 kbd_queue(s, 0x55, 0); 275 break; 276 case KBD_CCMD_KBD_TEST: 277 kbd_queue(s, 0x00, 0); 278 break; 279 case KBD_CCMD_KBD_DISABLE: 280 s->mode |= KBD_MODE_DISABLE_KBD; 281 kbd_update_irq(s); 282 break; 283 case KBD_CCMD_KBD_ENABLE: 284 s->mode &= ~KBD_MODE_DISABLE_KBD; 285 kbd_update_irq(s); 286 break; 287 case KBD_CCMD_READ_INPORT: 288 kbd_queue(s, 0x80, 0); 289 break; 290 case KBD_CCMD_READ_OUTPORT: 291 kbd_queue(s, s->outport, 0); 292 break; 293 case KBD_CCMD_ENABLE_A20: 294 qemu_irq_raise(s->a20_out); 295 s->outport |= KBD_OUT_A20; 296 break; 297 case KBD_CCMD_DISABLE_A20: 298 qemu_irq_lower(s->a20_out); 299 s->outport &= ~KBD_OUT_A20; 300 break; 301 case KBD_CCMD_RESET: 302 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 303 break; 304 case KBD_CCMD_NO_OP: 305 /* ignore that */ 306 break; 307 default: 308 qemu_log_mask(LOG_GUEST_ERROR, 309 "unsupported keyboard cmd=0x%02" PRIx64 "\n", val); 310 break; 311 } 312 } 313 314 static uint64_t kbd_read_data(void *opaque, hwaddr addr, 315 unsigned size) 316 { 317 KBDState *s = opaque; 318 uint32_t val; 319 320 if (s->pending == KBD_PENDING_AUX) 321 val = ps2_read_data(s->mouse); 322 else 323 val = ps2_read_data(s->kbd); 324 325 trace_pckbd_kbd_read_data(val); 326 return val; 327 } 328 329 static void kbd_write_data(void *opaque, hwaddr addr, 330 uint64_t val, unsigned size) 331 { 332 KBDState *s = opaque; 333 334 trace_pckbd_kbd_write_data(val); 335 336 switch(s->write_cmd) { 337 case 0: 338 ps2_write_keyboard(s->kbd, val); 339 break; 340 case KBD_CCMD_WRITE_MODE: 341 s->mode = val; 342 ps2_keyboard_set_translation(s->kbd, (s->mode & KBD_MODE_KCC) != 0); 343 /* ??? */ 344 kbd_update_irq(s); 345 break; 346 case KBD_CCMD_WRITE_OBUF: 347 kbd_queue(s, val, 0); 348 break; 349 case KBD_CCMD_WRITE_AUX_OBUF: 350 kbd_queue(s, val, 1); 351 break; 352 case KBD_CCMD_WRITE_OUTPORT: 353 outport_write(s, val); 354 break; 355 case KBD_CCMD_WRITE_MOUSE: 356 ps2_write_mouse(s->mouse, val); 357 break; 358 default: 359 break; 360 } 361 s->write_cmd = 0; 362 } 363 364 static void kbd_reset(void *opaque) 365 { 366 KBDState *s = opaque; 367 368 s->mode = KBD_MODE_KBD_INT | KBD_MODE_MOUSE_INT; 369 s->status = KBD_STAT_CMD | KBD_STAT_UNLOCKED; 370 s->outport = KBD_OUT_RESET | KBD_OUT_A20 | KBD_OUT_ONES; 371 s->outport_present = false; 372 } 373 374 static uint8_t kbd_outport_default(KBDState *s) 375 { 376 return KBD_OUT_RESET | KBD_OUT_A20 | KBD_OUT_ONES 377 | (s->status & KBD_STAT_OBF ? KBD_OUT_OBF : 0) 378 | (s->status & KBD_STAT_MOUSE_OBF ? KBD_OUT_MOUSE_OBF : 0); 379 } 380 381 static int kbd_outport_post_load(void *opaque, int version_id) 382 { 383 KBDState *s = opaque; 384 s->outport_present = true; 385 return 0; 386 } 387 388 static bool kbd_outport_needed(void *opaque) 389 { 390 KBDState *s = opaque; 391 return s->outport != kbd_outport_default(s); 392 } 393 394 static const VMStateDescription vmstate_kbd_outport = { 395 .name = "pckbd_outport", 396 .version_id = 1, 397 .minimum_version_id = 1, 398 .post_load = kbd_outport_post_load, 399 .needed = kbd_outport_needed, 400 .fields = (VMStateField[]) { 401 VMSTATE_UINT8(outport, KBDState), 402 VMSTATE_END_OF_LIST() 403 } 404 }; 405 406 static int kbd_post_load(void *opaque, int version_id) 407 { 408 KBDState *s = opaque; 409 if (!s->outport_present) { 410 s->outport = kbd_outport_default(s); 411 } 412 s->outport_present = false; 413 return 0; 414 } 415 416 static const VMStateDescription vmstate_kbd = { 417 .name = "pckbd", 418 .version_id = 3, 419 .minimum_version_id = 3, 420 .post_load = kbd_post_load, 421 .fields = (VMStateField[]) { 422 VMSTATE_UINT8(write_cmd, KBDState), 423 VMSTATE_UINT8(status, KBDState), 424 VMSTATE_UINT8(mode, KBDState), 425 VMSTATE_UINT8(pending, KBDState), 426 VMSTATE_END_OF_LIST() 427 }, 428 .subsections = (const VMStateDescription*[]) { 429 &vmstate_kbd_outport, 430 NULL 431 } 432 }; 433 434 /* Memory mapped interface */ 435 static uint64_t kbd_mm_readfn(void *opaque, hwaddr addr, unsigned size) 436 { 437 KBDState *s = opaque; 438 439 if (addr & s->mask) 440 return kbd_read_status(s, 0, 1) & 0xff; 441 else 442 return kbd_read_data(s, 0, 1) & 0xff; 443 } 444 445 static void kbd_mm_writefn(void *opaque, hwaddr addr, 446 uint64_t value, unsigned size) 447 { 448 KBDState *s = opaque; 449 450 if (addr & s->mask) 451 kbd_write_command(s, 0, value & 0xff, 1); 452 else 453 kbd_write_data(s, 0, value & 0xff, 1); 454 } 455 456 457 static const MemoryRegionOps i8042_mmio_ops = { 458 .read = kbd_mm_readfn, 459 .write = kbd_mm_writefn, 460 .valid.min_access_size = 1, 461 .valid.max_access_size = 4, 462 .endianness = DEVICE_NATIVE_ENDIAN, 463 }; 464 465 void i8042_mm_init(qemu_irq kbd_irq, qemu_irq mouse_irq, 466 MemoryRegion *region, ram_addr_t size, 467 hwaddr mask) 468 { 469 KBDState *s = g_malloc0(sizeof(KBDState)); 470 471 s->irq_kbd = kbd_irq; 472 s->irq_mouse = mouse_irq; 473 s->mask = mask; 474 475 vmstate_register(NULL, 0, &vmstate_kbd, s); 476 477 memory_region_init_io(region, NULL, &i8042_mmio_ops, s, "i8042", size); 478 479 s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s); 480 s->mouse = ps2_mouse_init(kbd_update_aux_irq, s); 481 qemu_register_reset(kbd_reset, s); 482 } 483 484 #define I8042(obj) OBJECT_CHECK(ISAKBDState, (obj), TYPE_I8042) 485 486 struct ISAKBDState { 487 ISADevice parent_obj; 488 489 KBDState kbd; 490 MemoryRegion io[2]; 491 }; 492 493 void i8042_isa_mouse_fake_event(ISAKBDState *isa) 494 { 495 KBDState *s = &isa->kbd; 496 497 ps2_mouse_fake_event(s->mouse); 498 } 499 500 void i8042_setup_a20_line(ISADevice *dev, qemu_irq a20_out) 501 { 502 qdev_connect_gpio_out_named(DEVICE(dev), I8042_A20_LINE, 0, a20_out); 503 } 504 505 static const VMStateDescription vmstate_kbd_isa = { 506 .name = "pckbd", 507 .version_id = 3, 508 .minimum_version_id = 3, 509 .fields = (VMStateField[]) { 510 VMSTATE_STRUCT(kbd, ISAKBDState, 0, vmstate_kbd, KBDState), 511 VMSTATE_END_OF_LIST() 512 } 513 }; 514 515 static const MemoryRegionOps i8042_data_ops = { 516 .read = kbd_read_data, 517 .write = kbd_write_data, 518 .impl = { 519 .min_access_size = 1, 520 .max_access_size = 1, 521 }, 522 .endianness = DEVICE_LITTLE_ENDIAN, 523 }; 524 525 static const MemoryRegionOps i8042_cmd_ops = { 526 .read = kbd_read_status, 527 .write = kbd_write_command, 528 .impl = { 529 .min_access_size = 1, 530 .max_access_size = 1, 531 }, 532 .endianness = DEVICE_LITTLE_ENDIAN, 533 }; 534 535 static void i8042_initfn(Object *obj) 536 { 537 ISAKBDState *isa_s = I8042(obj); 538 KBDState *s = &isa_s->kbd; 539 540 memory_region_init_io(isa_s->io + 0, obj, &i8042_data_ops, s, 541 "i8042-data", 1); 542 memory_region_init_io(isa_s->io + 1, obj, &i8042_cmd_ops, s, 543 "i8042-cmd", 1); 544 545 qdev_init_gpio_out_named(DEVICE(obj), &s->a20_out, I8042_A20_LINE, 1); 546 } 547 548 static void i8042_realizefn(DeviceState *dev, Error **errp) 549 { 550 ISADevice *isadev = ISA_DEVICE(dev); 551 ISAKBDState *isa_s = I8042(dev); 552 KBDState *s = &isa_s->kbd; 553 554 isa_init_irq(isadev, &s->irq_kbd, 1); 555 isa_init_irq(isadev, &s->irq_mouse, 12); 556 557 isa_register_ioport(isadev, isa_s->io + 0, 0x60); 558 isa_register_ioport(isadev, isa_s->io + 1, 0x64); 559 560 s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s); 561 s->mouse = ps2_mouse_init(kbd_update_aux_irq, s); 562 qemu_register_reset(kbd_reset, s); 563 } 564 565 static void i8042_build_aml(ISADevice *isadev, Aml *scope) 566 { 567 Aml *kbd; 568 Aml *mou; 569 Aml *crs; 570 571 crs = aml_resource_template(); 572 aml_append(crs, aml_io(AML_DECODE16, 0x0060, 0x0060, 0x01, 0x01)); 573 aml_append(crs, aml_io(AML_DECODE16, 0x0064, 0x0064, 0x01, 0x01)); 574 aml_append(crs, aml_irq_no_flags(1)); 575 576 kbd = aml_device("KBD"); 577 aml_append(kbd, aml_name_decl("_HID", aml_eisaid("PNP0303"))); 578 aml_append(kbd, aml_name_decl("_STA", aml_int(0xf))); 579 aml_append(kbd, aml_name_decl("_CRS", crs)); 580 581 crs = aml_resource_template(); 582 aml_append(crs, aml_irq_no_flags(12)); 583 584 mou = aml_device("MOU"); 585 aml_append(mou, aml_name_decl("_HID", aml_eisaid("PNP0F13"))); 586 aml_append(mou, aml_name_decl("_STA", aml_int(0xf))); 587 aml_append(mou, aml_name_decl("_CRS", crs)); 588 589 aml_append(scope, kbd); 590 aml_append(scope, mou); 591 } 592 593 static void i8042_class_initfn(ObjectClass *klass, void *data) 594 { 595 DeviceClass *dc = DEVICE_CLASS(klass); 596 ISADeviceClass *isa = ISA_DEVICE_CLASS(klass); 597 598 dc->realize = i8042_realizefn; 599 dc->vmsd = &vmstate_kbd_isa; 600 isa->build_aml = i8042_build_aml; 601 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 602 } 603 604 static const TypeInfo i8042_info = { 605 .name = TYPE_I8042, 606 .parent = TYPE_ISA_DEVICE, 607 .instance_size = sizeof(ISAKBDState), 608 .instance_init = i8042_initfn, 609 .class_init = i8042_class_initfn, 610 }; 611 612 static void i8042_register_types(void) 613 { 614 type_register_static(&i8042_info); 615 } 616 617 type_init(i8042_register_types) 618