1 /* 2 * QEMU PC keyboard emulation 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 #include "qemu/osdep.h" 25 #include "hw/hw.h" 26 #include "hw/isa/isa.h" 27 #include "hw/i386/pc.h" 28 #include "hw/input/ps2.h" 29 #include "sysemu/sysemu.h" 30 31 /* debug PC keyboard */ 32 //#define DEBUG_KBD 33 #ifdef DEBUG_KBD 34 #define DPRINTF(fmt, ...) \ 35 do { printf("KBD: " fmt , ## __VA_ARGS__); } while (0) 36 #else 37 #define DPRINTF(fmt, ...) 38 #endif 39 40 /* Keyboard Controller Commands */ 41 #define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */ 42 #define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */ 43 #define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */ 44 #define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */ 45 #define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */ 46 #define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */ 47 #define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */ 48 #define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */ 49 #define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */ 50 #define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */ 51 #define KBD_CCMD_READ_INPORT 0xC0 /* read input port */ 52 #define KBD_CCMD_READ_OUTPORT 0xD0 /* read output port */ 53 #define KBD_CCMD_WRITE_OUTPORT 0xD1 /* write output port */ 54 #define KBD_CCMD_WRITE_OBUF 0xD2 55 #define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if 56 initiated by the auxiliary device */ 57 #define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */ 58 #define KBD_CCMD_DISABLE_A20 0xDD /* HP vectra only ? */ 59 #define KBD_CCMD_ENABLE_A20 0xDF /* HP vectra only ? */ 60 #define KBD_CCMD_PULSE_BITS_3_0 0xF0 /* Pulse bits 3-0 of the output port P2. */ 61 #define KBD_CCMD_RESET 0xFE /* Pulse bit 0 of the output port P2 = CPU reset. */ 62 #define KBD_CCMD_NO_OP 0xFF /* Pulse no bits of the output port P2. */ 63 64 /* Keyboard Commands */ 65 #define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */ 66 #define KBD_CMD_ECHO 0xEE 67 #define KBD_CMD_GET_ID 0xF2 /* get keyboard ID */ 68 #define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */ 69 #define KBD_CMD_ENABLE 0xF4 /* Enable scanning */ 70 #define KBD_CMD_RESET_DISABLE 0xF5 /* reset and disable scanning */ 71 #define KBD_CMD_RESET_ENABLE 0xF6 /* reset and enable scanning */ 72 #define KBD_CMD_RESET 0xFF /* Reset */ 73 74 /* Keyboard Replies */ 75 #define KBD_REPLY_POR 0xAA /* Power on reset */ 76 #define KBD_REPLY_ACK 0xFA /* Command ACK */ 77 #define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */ 78 79 /* Status Register Bits */ 80 #define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ 81 #define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */ 82 #define KBD_STAT_SELFTEST 0x04 /* Self test successful */ 83 #define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */ 84 #define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */ 85 #define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ 86 #define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */ 87 #define KBD_STAT_PERR 0x80 /* Parity error */ 88 89 /* Controller Mode Register Bits */ 90 #define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */ 91 #define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */ 92 #define KBD_MODE_SYS 0x04 /* The system flag (?) */ 93 #define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */ 94 #define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */ 95 #define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */ 96 #define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */ 97 #define KBD_MODE_RFU 0x80 98 99 /* Output Port Bits */ 100 #define KBD_OUT_RESET 0x01 /* 1=normal mode, 0=reset */ 101 #define KBD_OUT_A20 0x02 /* x86 only */ 102 #define KBD_OUT_OBF 0x10 /* Keyboard output buffer full */ 103 #define KBD_OUT_MOUSE_OBF 0x20 /* Mouse output buffer full */ 104 105 /* OSes typically write 0xdd/0xdf to turn the A20 line off and on. 106 * We make the default value of the outport include these four bits, 107 * so that the subsection is rarely necessary. 108 */ 109 #define KBD_OUT_ONES 0xcc 110 111 /* Mouse Commands */ 112 #define AUX_SET_SCALE11 0xE6 /* Set 1:1 scaling */ 113 #define AUX_SET_SCALE21 0xE7 /* Set 2:1 scaling */ 114 #define AUX_SET_RES 0xE8 /* Set resolution */ 115 #define AUX_GET_SCALE 0xE9 /* Get scaling factor */ 116 #define AUX_SET_STREAM 0xEA /* Set stream mode */ 117 #define AUX_POLL 0xEB /* Poll */ 118 #define AUX_RESET_WRAP 0xEC /* Reset wrap mode */ 119 #define AUX_SET_WRAP 0xEE /* Set wrap mode */ 120 #define AUX_SET_REMOTE 0xF0 /* Set remote mode */ 121 #define AUX_GET_TYPE 0xF2 /* Get type */ 122 #define AUX_SET_SAMPLE 0xF3 /* Set sample rate */ 123 #define AUX_ENABLE_DEV 0xF4 /* Enable aux device */ 124 #define AUX_DISABLE_DEV 0xF5 /* Disable aux device */ 125 #define AUX_SET_DEFAULT 0xF6 126 #define AUX_RESET 0xFF /* Reset aux device */ 127 #define AUX_ACK 0xFA /* Command byte ACK. */ 128 129 #define MOUSE_STATUS_REMOTE 0x40 130 #define MOUSE_STATUS_ENABLED 0x20 131 #define MOUSE_STATUS_SCALE21 0x10 132 133 #define KBD_PENDING_KBD 1 134 #define KBD_PENDING_AUX 2 135 136 typedef struct KBDState { 137 uint8_t write_cmd; /* if non zero, write data to port 60 is expected */ 138 uint8_t status; 139 uint8_t mode; 140 uint8_t outport; 141 bool outport_present; 142 /* Bitmask of devices with data available. */ 143 uint8_t pending; 144 void *kbd; 145 void *mouse; 146 147 qemu_irq irq_kbd; 148 qemu_irq irq_mouse; 149 qemu_irq a20_out; 150 hwaddr mask; 151 } KBDState; 152 153 /* update irq and KBD_STAT_[MOUSE_]OBF */ 154 /* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be 155 incorrect, but it avoids having to simulate exact delays */ 156 static void kbd_update_irq(KBDState *s) 157 { 158 int irq_kbd_level, irq_mouse_level; 159 160 irq_kbd_level = 0; 161 irq_mouse_level = 0; 162 s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF); 163 s->outport &= ~(KBD_OUT_OBF | KBD_OUT_MOUSE_OBF); 164 if (s->pending) { 165 s->status |= KBD_STAT_OBF; 166 s->outport |= KBD_OUT_OBF; 167 /* kbd data takes priority over aux data. */ 168 if (s->pending == KBD_PENDING_AUX) { 169 s->status |= KBD_STAT_MOUSE_OBF; 170 s->outport |= KBD_OUT_MOUSE_OBF; 171 if (s->mode & KBD_MODE_MOUSE_INT) 172 irq_mouse_level = 1; 173 } else { 174 if ((s->mode & KBD_MODE_KBD_INT) && 175 !(s->mode & KBD_MODE_DISABLE_KBD)) 176 irq_kbd_level = 1; 177 } 178 } 179 qemu_set_irq(s->irq_kbd, irq_kbd_level); 180 qemu_set_irq(s->irq_mouse, irq_mouse_level); 181 } 182 183 static void kbd_update_kbd_irq(void *opaque, int level) 184 { 185 KBDState *s = (KBDState *)opaque; 186 187 if (level) 188 s->pending |= KBD_PENDING_KBD; 189 else 190 s->pending &= ~KBD_PENDING_KBD; 191 kbd_update_irq(s); 192 } 193 194 static void kbd_update_aux_irq(void *opaque, int level) 195 { 196 KBDState *s = (KBDState *)opaque; 197 198 if (level) 199 s->pending |= KBD_PENDING_AUX; 200 else 201 s->pending &= ~KBD_PENDING_AUX; 202 kbd_update_irq(s); 203 } 204 205 static uint64_t kbd_read_status(void *opaque, hwaddr addr, 206 unsigned size) 207 { 208 KBDState *s = opaque; 209 int val; 210 val = s->status; 211 DPRINTF("kbd: read status=0x%02x\n", val); 212 return val; 213 } 214 215 static void kbd_queue(KBDState *s, int b, int aux) 216 { 217 if (aux) 218 ps2_queue(s->mouse, b); 219 else 220 ps2_queue(s->kbd, b); 221 } 222 223 static void outport_write(KBDState *s, uint32_t val) 224 { 225 DPRINTF("kbd: write outport=0x%02x\n", val); 226 s->outport = val; 227 qemu_set_irq(s->a20_out, (val >> 1) & 1); 228 if (!(val & 1)) { 229 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 230 } 231 } 232 233 static void kbd_write_command(void *opaque, hwaddr addr, 234 uint64_t val, unsigned size) 235 { 236 KBDState *s = opaque; 237 238 DPRINTF("kbd: write cmd=0x%02" PRIx64 "\n", val); 239 240 /* Bits 3-0 of the output port P2 of the keyboard controller may be pulsed 241 * low for approximately 6 micro seconds. Bits 3-0 of the KBD_CCMD_PULSE 242 * command specify the output port bits to be pulsed. 243 * 0: Bit should be pulsed. 1: Bit should not be modified. 244 * The only useful version of this command is pulsing bit 0, 245 * which does a CPU reset. 246 */ 247 if((val & KBD_CCMD_PULSE_BITS_3_0) == KBD_CCMD_PULSE_BITS_3_0) { 248 if(!(val & 1)) 249 val = KBD_CCMD_RESET; 250 else 251 val = KBD_CCMD_NO_OP; 252 } 253 254 switch(val) { 255 case KBD_CCMD_READ_MODE: 256 kbd_queue(s, s->mode, 0); 257 break; 258 case KBD_CCMD_WRITE_MODE: 259 case KBD_CCMD_WRITE_OBUF: 260 case KBD_CCMD_WRITE_AUX_OBUF: 261 case KBD_CCMD_WRITE_MOUSE: 262 case KBD_CCMD_WRITE_OUTPORT: 263 s->write_cmd = val; 264 break; 265 case KBD_CCMD_MOUSE_DISABLE: 266 s->mode |= KBD_MODE_DISABLE_MOUSE; 267 break; 268 case KBD_CCMD_MOUSE_ENABLE: 269 s->mode &= ~KBD_MODE_DISABLE_MOUSE; 270 break; 271 case KBD_CCMD_TEST_MOUSE: 272 kbd_queue(s, 0x00, 0); 273 break; 274 case KBD_CCMD_SELF_TEST: 275 s->status |= KBD_STAT_SELFTEST; 276 kbd_queue(s, 0x55, 0); 277 break; 278 case KBD_CCMD_KBD_TEST: 279 kbd_queue(s, 0x00, 0); 280 break; 281 case KBD_CCMD_KBD_DISABLE: 282 s->mode |= KBD_MODE_DISABLE_KBD; 283 kbd_update_irq(s); 284 break; 285 case KBD_CCMD_KBD_ENABLE: 286 s->mode &= ~KBD_MODE_DISABLE_KBD; 287 kbd_update_irq(s); 288 break; 289 case KBD_CCMD_READ_INPORT: 290 kbd_queue(s, 0x80, 0); 291 break; 292 case KBD_CCMD_READ_OUTPORT: 293 kbd_queue(s, s->outport, 0); 294 break; 295 case KBD_CCMD_ENABLE_A20: 296 qemu_irq_raise(s->a20_out); 297 s->outport |= KBD_OUT_A20; 298 break; 299 case KBD_CCMD_DISABLE_A20: 300 qemu_irq_lower(s->a20_out); 301 s->outport &= ~KBD_OUT_A20; 302 break; 303 case KBD_CCMD_RESET: 304 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 305 break; 306 case KBD_CCMD_NO_OP: 307 /* ignore that */ 308 break; 309 default: 310 fprintf(stderr, "qemu: unsupported keyboard cmd=0x%02x\n", (int)val); 311 break; 312 } 313 } 314 315 static uint64_t kbd_read_data(void *opaque, hwaddr addr, 316 unsigned size) 317 { 318 KBDState *s = opaque; 319 uint32_t val; 320 321 if (s->pending == KBD_PENDING_AUX) 322 val = ps2_read_data(s->mouse); 323 else 324 val = ps2_read_data(s->kbd); 325 326 DPRINTF("kbd: read data=0x%02x\n", val); 327 return val; 328 } 329 330 static void kbd_write_data(void *opaque, hwaddr addr, 331 uint64_t val, unsigned size) 332 { 333 KBDState *s = opaque; 334 335 DPRINTF("kbd: write data=0x%02" PRIx64 "\n", val); 336 337 switch(s->write_cmd) { 338 case 0: 339 ps2_write_keyboard(s->kbd, val); 340 break; 341 case KBD_CCMD_WRITE_MODE: 342 s->mode = val; 343 ps2_keyboard_set_translation(s->kbd, (s->mode & KBD_MODE_KCC) != 0); 344 /* ??? */ 345 kbd_update_irq(s); 346 break; 347 case KBD_CCMD_WRITE_OBUF: 348 kbd_queue(s, val, 0); 349 break; 350 case KBD_CCMD_WRITE_AUX_OBUF: 351 kbd_queue(s, val, 1); 352 break; 353 case KBD_CCMD_WRITE_OUTPORT: 354 outport_write(s, val); 355 break; 356 case KBD_CCMD_WRITE_MOUSE: 357 ps2_write_mouse(s->mouse, val); 358 break; 359 default: 360 break; 361 } 362 s->write_cmd = 0; 363 } 364 365 static void kbd_reset(void *opaque) 366 { 367 KBDState *s = opaque; 368 369 s->mode = KBD_MODE_KBD_INT | KBD_MODE_MOUSE_INT; 370 s->status = KBD_STAT_CMD | KBD_STAT_UNLOCKED; 371 s->outport = KBD_OUT_RESET | KBD_OUT_A20 | KBD_OUT_ONES; 372 s->outport_present = false; 373 } 374 375 static uint8_t kbd_outport_default(KBDState *s) 376 { 377 return KBD_OUT_RESET | KBD_OUT_A20 | KBD_OUT_ONES 378 | (s->status & KBD_STAT_OBF ? KBD_OUT_OBF : 0) 379 | (s->status & KBD_STAT_MOUSE_OBF ? KBD_OUT_MOUSE_OBF : 0); 380 } 381 382 static int kbd_outport_post_load(void *opaque, int version_id) 383 { 384 KBDState *s = opaque; 385 s->outport_present = true; 386 return 0; 387 } 388 389 static bool kbd_outport_needed(void *opaque) 390 { 391 KBDState *s = opaque; 392 return s->outport != kbd_outport_default(s); 393 } 394 395 static const VMStateDescription vmstate_kbd_outport = { 396 .name = "pckbd_outport", 397 .version_id = 1, 398 .minimum_version_id = 1, 399 .post_load = kbd_outport_post_load, 400 .needed = kbd_outport_needed, 401 .fields = (VMStateField[]) { 402 VMSTATE_UINT8(outport, KBDState), 403 VMSTATE_END_OF_LIST() 404 } 405 }; 406 407 static int kbd_post_load(void *opaque, int version_id) 408 { 409 KBDState *s = opaque; 410 if (!s->outport_present) { 411 s->outport = kbd_outport_default(s); 412 } 413 s->outport_present = false; 414 return 0; 415 } 416 417 static const VMStateDescription vmstate_kbd = { 418 .name = "pckbd", 419 .version_id = 3, 420 .minimum_version_id = 3, 421 .post_load = kbd_post_load, 422 .fields = (VMStateField[]) { 423 VMSTATE_UINT8(write_cmd, KBDState), 424 VMSTATE_UINT8(status, KBDState), 425 VMSTATE_UINT8(mode, KBDState), 426 VMSTATE_UINT8(pending, KBDState), 427 VMSTATE_END_OF_LIST() 428 }, 429 .subsections = (const VMStateDescription*[]) { 430 &vmstate_kbd_outport, 431 NULL 432 } 433 }; 434 435 /* Memory mapped interface */ 436 static uint32_t kbd_mm_readb (void *opaque, hwaddr addr) 437 { 438 KBDState *s = opaque; 439 440 if (addr & s->mask) 441 return kbd_read_status(s, 0, 1) & 0xff; 442 else 443 return kbd_read_data(s, 0, 1) & 0xff; 444 } 445 446 static void kbd_mm_writeb (void *opaque, hwaddr addr, uint32_t value) 447 { 448 KBDState *s = opaque; 449 450 if (addr & s->mask) 451 kbd_write_command(s, 0, value & 0xff, 1); 452 else 453 kbd_write_data(s, 0, value & 0xff, 1); 454 } 455 456 static const MemoryRegionOps i8042_mmio_ops = { 457 .endianness = DEVICE_NATIVE_ENDIAN, 458 .old_mmio = { 459 .read = { kbd_mm_readb, kbd_mm_readb, kbd_mm_readb }, 460 .write = { kbd_mm_writeb, kbd_mm_writeb, kbd_mm_writeb }, 461 }, 462 }; 463 464 void i8042_mm_init(qemu_irq kbd_irq, qemu_irq mouse_irq, 465 MemoryRegion *region, ram_addr_t size, 466 hwaddr mask) 467 { 468 KBDState *s = g_malloc0(sizeof(KBDState)); 469 470 s->irq_kbd = kbd_irq; 471 s->irq_mouse = mouse_irq; 472 s->mask = mask; 473 474 vmstate_register(NULL, 0, &vmstate_kbd, s); 475 476 memory_region_init_io(region, NULL, &i8042_mmio_ops, s, "i8042", size); 477 478 s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s); 479 s->mouse = ps2_mouse_init(kbd_update_aux_irq, s); 480 qemu_register_reset(kbd_reset, s); 481 } 482 483 #define TYPE_I8042 "i8042" 484 #define I8042(obj) OBJECT_CHECK(ISAKBDState, (obj), TYPE_I8042) 485 486 typedef struct ISAKBDState { 487 ISADevice parent_obj; 488 489 KBDState kbd; 490 MemoryRegion io[2]; 491 } ISAKBDState; 492 493 void i8042_isa_mouse_fake_event(void *opaque) 494 { 495 ISADevice *dev = opaque; 496 ISAKBDState *isa = I8042(dev); 497 KBDState *s = &isa->kbd; 498 499 ps2_mouse_fake_event(s->mouse); 500 } 501 502 void i8042_setup_a20_line(ISADevice *dev, qemu_irq a20_out) 503 { 504 qdev_connect_gpio_out_named(DEVICE(dev), I8042_A20_LINE, 0, a20_out); 505 } 506 507 static const VMStateDescription vmstate_kbd_isa = { 508 .name = "pckbd", 509 .version_id = 3, 510 .minimum_version_id = 3, 511 .fields = (VMStateField[]) { 512 VMSTATE_STRUCT(kbd, ISAKBDState, 0, vmstate_kbd, KBDState), 513 VMSTATE_END_OF_LIST() 514 } 515 }; 516 517 static const MemoryRegionOps i8042_data_ops = { 518 .read = kbd_read_data, 519 .write = kbd_write_data, 520 .impl = { 521 .min_access_size = 1, 522 .max_access_size = 1, 523 }, 524 .endianness = DEVICE_LITTLE_ENDIAN, 525 }; 526 527 static const MemoryRegionOps i8042_cmd_ops = { 528 .read = kbd_read_status, 529 .write = kbd_write_command, 530 .impl = { 531 .min_access_size = 1, 532 .max_access_size = 1, 533 }, 534 .endianness = DEVICE_LITTLE_ENDIAN, 535 }; 536 537 static void i8042_initfn(Object *obj) 538 { 539 ISAKBDState *isa_s = I8042(obj); 540 KBDState *s = &isa_s->kbd; 541 542 memory_region_init_io(isa_s->io + 0, obj, &i8042_data_ops, s, 543 "i8042-data", 1); 544 memory_region_init_io(isa_s->io + 1, obj, &i8042_cmd_ops, s, 545 "i8042-cmd", 1); 546 547 qdev_init_gpio_out_named(DEVICE(obj), &s->a20_out, I8042_A20_LINE, 1); 548 } 549 550 static void i8042_realizefn(DeviceState *dev, Error **errp) 551 { 552 ISADevice *isadev = ISA_DEVICE(dev); 553 ISAKBDState *isa_s = I8042(dev); 554 KBDState *s = &isa_s->kbd; 555 556 isa_init_irq(isadev, &s->irq_kbd, 1); 557 isa_init_irq(isadev, &s->irq_mouse, 12); 558 559 isa_register_ioport(isadev, isa_s->io + 0, 0x60); 560 isa_register_ioport(isadev, isa_s->io + 1, 0x64); 561 562 s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s); 563 s->mouse = ps2_mouse_init(kbd_update_aux_irq, s); 564 qemu_register_reset(kbd_reset, s); 565 } 566 567 static void i8042_class_initfn(ObjectClass *klass, void *data) 568 { 569 DeviceClass *dc = DEVICE_CLASS(klass); 570 571 dc->realize = i8042_realizefn; 572 dc->vmsd = &vmstate_kbd_isa; 573 } 574 575 static const TypeInfo i8042_info = { 576 .name = TYPE_I8042, 577 .parent = TYPE_ISA_DEVICE, 578 .instance_size = sizeof(ISAKBDState), 579 .instance_init = i8042_initfn, 580 .class_init = i8042_class_initfn, 581 }; 582 583 static void i8042_register_types(void) 584 { 585 type_register_static(&i8042_info); 586 } 587 588 type_init(i8042_register_types) 589