xref: /openbmc/qemu/hw/ide/via.c (revision 4a09d0bb)
1 /*
2  * QEMU IDE Emulation: PCI VIA82C686B support.
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  * Copyright (c) 2006 Openedhand Ltd.
6  * Copyright (c) 2010 Huacai Chen <zltjiangshi@gmail.com>
7  *
8  * Permission is hereby granted, free of charge, to any person obtaining a copy
9  * of this software and associated documentation files (the "Software"), to deal
10  * in the Software without restriction, including without limitation the rights
11  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12  * copies of the Software, and to permit persons to whom the Software is
13  * furnished to do so, subject to the following conditions:
14  *
15  * The above copyright notice and this permission notice shall be included in
16  * all copies or substantial portions of the Software.
17  *
18  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24  * THE SOFTWARE.
25  */
26 #include "qemu/osdep.h"
27 #include "hw/hw.h"
28 #include "hw/i386/pc.h"
29 #include "hw/pci/pci.h"
30 #include "hw/isa/isa.h"
31 #include "sysemu/block-backend.h"
32 #include "sysemu/sysemu.h"
33 #include "sysemu/dma.h"
34 
35 #include "hw/ide/pci.h"
36 
37 static uint64_t bmdma_read(void *opaque, hwaddr addr,
38                            unsigned size)
39 {
40     BMDMAState *bm = opaque;
41     uint32_t val;
42 
43     if (size != 1) {
44         return ((uint64_t)1 << (size * 8)) - 1;
45     }
46 
47     switch (addr & 3) {
48     case 0:
49         val = bm->cmd;
50         break;
51     case 2:
52         val = bm->status;
53         break;
54     default:
55         val = 0xff;
56         break;
57     }
58 #ifdef DEBUG_IDE
59     printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
60 #endif
61     return val;
62 }
63 
64 static void bmdma_write(void *opaque, hwaddr addr,
65                         uint64_t val, unsigned size)
66 {
67     BMDMAState *bm = opaque;
68 
69     if (size != 1) {
70         return;
71     }
72 
73 #ifdef DEBUG_IDE
74     printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
75 #endif
76     switch (addr & 3) {
77     case 0:
78         bmdma_cmd_writeb(bm, val);
79         break;
80     case 2:
81         bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
82         break;
83     default:;
84     }
85 }
86 
87 static const MemoryRegionOps via_bmdma_ops = {
88     .read = bmdma_read,
89     .write = bmdma_write,
90 };
91 
92 static void bmdma_setup_bar(PCIIDEState *d)
93 {
94     int i;
95 
96     memory_region_init(&d->bmdma_bar, OBJECT(d), "via-bmdma-container", 16);
97     for(i = 0;i < 2; i++) {
98         BMDMAState *bm = &d->bmdma[i];
99 
100         memory_region_init_io(&bm->extra_io, OBJECT(d), &via_bmdma_ops, bm,
101                               "via-bmdma", 4);
102         memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
103         memory_region_init_io(&bm->addr_ioport, OBJECT(d),
104                               &bmdma_addr_ioport_ops, bm, "bmdma", 4);
105         memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
106     }
107 }
108 
109 static void via_reset(void *opaque)
110 {
111     PCIIDEState *d = opaque;
112     PCIDevice *pd = PCI_DEVICE(d);
113     uint8_t *pci_conf = pd->config;
114     int i;
115 
116     for (i = 0; i < 2; i++) {
117         ide_bus_reset(&d->bus[i]);
118     }
119 
120     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_WAIT);
121     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
122                  PCI_STATUS_DEVSEL_MEDIUM);
123 
124     pci_set_long(pci_conf + PCI_BASE_ADDRESS_0, 0x000001f0);
125     pci_set_long(pci_conf + PCI_BASE_ADDRESS_1, 0x000003f4);
126     pci_set_long(pci_conf + PCI_BASE_ADDRESS_2, 0x00000170);
127     pci_set_long(pci_conf + PCI_BASE_ADDRESS_3, 0x00000374);
128     pci_set_long(pci_conf + PCI_BASE_ADDRESS_4, 0x0000cc01); /* BMIBA: 20-23h */
129     pci_set_long(pci_conf + PCI_INTERRUPT_LINE, 0x0000010e);
130 
131     /* IDE chip enable, IDE configuration 1/2, IDE FIFO Configuration*/
132     pci_set_long(pci_conf + 0x40, 0x0a090600);
133     /* IDE misc configuration 1/2/3 */
134     pci_set_long(pci_conf + 0x44, 0x00c00068);
135     /* IDE Timing control */
136     pci_set_long(pci_conf + 0x48, 0xa8a8a8a8);
137     /* IDE Address Setup Time */
138     pci_set_long(pci_conf + 0x4c, 0x000000ff);
139     /* UltraDMA Extended Timing Control*/
140     pci_set_long(pci_conf + 0x50, 0x07070707);
141     /* UltraDMA FIFO Control */
142     pci_set_long(pci_conf + 0x54, 0x00000004);
143     /* IDE primary sector size */
144     pci_set_long(pci_conf + 0x60, 0x00000200);
145     /* IDE secondary sector size */
146     pci_set_long(pci_conf + 0x68, 0x00000200);
147     /* PCI PM Block */
148     pci_set_long(pci_conf + 0xc0, 0x00020001);
149 }
150 
151 static void vt82c686b_init_ports(PCIIDEState *d) {
152     static const struct {
153         int iobase;
154         int iobase2;
155         int isairq;
156     } port_info[] = {
157         {0x1f0, 0x3f6, 14},
158         {0x170, 0x376, 15},
159     };
160     int i;
161 
162     for (i = 0; i < 2; i++) {
163         ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(d), i, 2);
164         ide_init_ioport(&d->bus[i], NULL, port_info[i].iobase,
165                         port_info[i].iobase2);
166         ide_init2(&d->bus[i], isa_get_irq(NULL, port_info[i].isairq));
167 
168         bmdma_init(&d->bus[i], &d->bmdma[i], d);
169         d->bmdma[i].bus = &d->bus[i];
170         ide_register_restart_cb(&d->bus[i]);
171     }
172 }
173 
174 /* via ide func */
175 static void vt82c686b_ide_realize(PCIDevice *dev, Error **errp)
176 {
177     PCIIDEState *d = PCI_IDE(dev);
178     uint8_t *pci_conf = dev->config;
179 
180     pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy ATA mode */
181     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
182 
183     qemu_register_reset(via_reset, d);
184     bmdma_setup_bar(d);
185     pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
186 
187     vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d);
188 
189     vt82c686b_init_ports(d);
190 }
191 
192 static void vt82c686b_ide_exitfn(PCIDevice *dev)
193 {
194     PCIIDEState *d = PCI_IDE(dev);
195     unsigned i;
196 
197     for (i = 0; i < 2; ++i) {
198         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
199         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
200     }
201 }
202 
203 void vt82c686b_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
204 {
205     PCIDevice *dev;
206 
207     dev = pci_create_simple(bus, devfn, "via-ide");
208     pci_ide_create_devs(dev, hd_table);
209 }
210 
211 static void via_ide_class_init(ObjectClass *klass, void *data)
212 {
213     DeviceClass *dc = DEVICE_CLASS(klass);
214     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
215 
216     k->realize = vt82c686b_ide_realize;
217     k->exit = vt82c686b_ide_exitfn;
218     k->vendor_id = PCI_VENDOR_ID_VIA;
219     k->device_id = PCI_DEVICE_ID_VIA_IDE;
220     k->revision = 0x06;
221     k->class_id = PCI_CLASS_STORAGE_IDE;
222     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
223 }
224 
225 static const TypeInfo via_ide_info = {
226     .name          = "via-ide",
227     .parent        = TYPE_PCI_IDE,
228     .class_init    = via_ide_class_init,
229 };
230 
231 static void via_ide_register_types(void)
232 {
233     type_register_static(&via_ide_info);
234 }
235 
236 type_init(via_ide_register_types)
237