xref: /openbmc/qemu/hw/ide/via.c (revision 228aa992)
1 /*
2  * QEMU IDE Emulation: PCI VIA82C686B support.
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  * Copyright (c) 2006 Openedhand Ltd.
6  * Copyright (c) 2010 Huacai Chen <zltjiangshi@gmail.com>
7  *
8  * Permission is hereby granted, free of charge, to any person obtaining a copy
9  * of this software and associated documentation files (the "Software"), to deal
10  * in the Software without restriction, including without limitation the rights
11  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12  * copies of the Software, and to permit persons to whom the Software is
13  * furnished to do so, subject to the following conditions:
14  *
15  * The above copyright notice and this permission notice shall be included in
16  * all copies or substantial portions of the Software.
17  *
18  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24  * THE SOFTWARE.
25  */
26 #include <hw/hw.h>
27 #include <hw/i386/pc.h>
28 #include <hw/pci/pci.h>
29 #include <hw/isa/isa.h>
30 #include "sysemu/block-backend.h"
31 #include "sysemu/sysemu.h"
32 #include "sysemu/dma.h"
33 
34 #include <hw/ide/pci.h>
35 
36 static uint64_t bmdma_read(void *opaque, hwaddr addr,
37                            unsigned size)
38 {
39     BMDMAState *bm = opaque;
40     uint32_t val;
41 
42     if (size != 1) {
43         return ((uint64_t)1 << (size * 8)) - 1;
44     }
45 
46     switch (addr & 3) {
47     case 0:
48         val = bm->cmd;
49         break;
50     case 2:
51         val = bm->status;
52         break;
53     default:
54         val = 0xff;
55         break;
56     }
57 #ifdef DEBUG_IDE
58     printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
59 #endif
60     return val;
61 }
62 
63 static void bmdma_write(void *opaque, hwaddr addr,
64                         uint64_t val, unsigned size)
65 {
66     BMDMAState *bm = opaque;
67 
68     if (size != 1) {
69         return;
70     }
71 
72 #ifdef DEBUG_IDE
73     printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
74 #endif
75     switch (addr & 3) {
76     case 0:
77         bmdma_cmd_writeb(bm, val);
78         break;
79     case 2:
80         bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
81         break;
82     default:;
83     }
84 }
85 
86 static const MemoryRegionOps via_bmdma_ops = {
87     .read = bmdma_read,
88     .write = bmdma_write,
89 };
90 
91 static void bmdma_setup_bar(PCIIDEState *d)
92 {
93     int i;
94 
95     memory_region_init(&d->bmdma_bar, OBJECT(d), "via-bmdma-container", 16);
96     for(i = 0;i < 2; i++) {
97         BMDMAState *bm = &d->bmdma[i];
98 
99         memory_region_init_io(&bm->extra_io, OBJECT(d), &via_bmdma_ops, bm,
100                               "via-bmdma", 4);
101         memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
102         memory_region_init_io(&bm->addr_ioport, OBJECT(d),
103                               &bmdma_addr_ioport_ops, bm, "bmdma", 4);
104         memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
105     }
106 }
107 
108 static void via_reset(void *opaque)
109 {
110     PCIIDEState *d = opaque;
111     PCIDevice *pd = PCI_DEVICE(d);
112     uint8_t *pci_conf = pd->config;
113     int i;
114 
115     for (i = 0; i < 2; i++) {
116         ide_bus_reset(&d->bus[i]);
117     }
118 
119     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_WAIT);
120     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
121                  PCI_STATUS_DEVSEL_MEDIUM);
122 
123     pci_set_long(pci_conf + PCI_BASE_ADDRESS_0, 0x000001f0);
124     pci_set_long(pci_conf + PCI_BASE_ADDRESS_1, 0x000003f4);
125     pci_set_long(pci_conf + PCI_BASE_ADDRESS_2, 0x00000170);
126     pci_set_long(pci_conf + PCI_BASE_ADDRESS_3, 0x00000374);
127     pci_set_long(pci_conf + PCI_BASE_ADDRESS_4, 0x0000cc01); /* BMIBA: 20-23h */
128     pci_set_long(pci_conf + PCI_INTERRUPT_LINE, 0x0000010e);
129 
130     /* IDE chip enable, IDE configuration 1/2, IDE FIFO Configuration*/
131     pci_set_long(pci_conf + 0x40, 0x0a090600);
132     /* IDE misc configuration 1/2/3 */
133     pci_set_long(pci_conf + 0x44, 0x00c00068);
134     /* IDE Timing control */
135     pci_set_long(pci_conf + 0x48, 0xa8a8a8a8);
136     /* IDE Address Setup Time */
137     pci_set_long(pci_conf + 0x4c, 0x000000ff);
138     /* UltraDMA Extended Timing Control*/
139     pci_set_long(pci_conf + 0x50, 0x07070707);
140     /* UltraDMA FIFO Control */
141     pci_set_long(pci_conf + 0x54, 0x00000004);
142     /* IDE primary sector size */
143     pci_set_long(pci_conf + 0x60, 0x00000200);
144     /* IDE secondary sector size */
145     pci_set_long(pci_conf + 0x68, 0x00000200);
146     /* PCI PM Block */
147     pci_set_long(pci_conf + 0xc0, 0x00020001);
148 }
149 
150 static void vt82c686b_init_ports(PCIIDEState *d) {
151     static const struct {
152         int iobase;
153         int iobase2;
154         int isairq;
155     } port_info[] = {
156         {0x1f0, 0x3f6, 14},
157         {0x170, 0x376, 15},
158     };
159     int i;
160 
161     for (i = 0; i < 2; i++) {
162         ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(d), i, 2);
163         ide_init_ioport(&d->bus[i], NULL, port_info[i].iobase,
164                         port_info[i].iobase2);
165         ide_init2(&d->bus[i], isa_get_irq(NULL, port_info[i].isairq));
166 
167         bmdma_init(&d->bus[i], &d->bmdma[i], d);
168         d->bmdma[i].bus = &d->bus[i];
169         qemu_add_vm_change_state_handler(d->bus[i].dma->ops->restart_cb,
170                                          &d->bmdma[i].dma);
171     }
172 }
173 
174 /* via ide func */
175 static int vt82c686b_ide_initfn(PCIDevice *dev)
176 {
177     PCIIDEState *d = PCI_IDE(dev);
178     uint8_t *pci_conf = dev->config;
179 
180     pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy ATA mode */
181     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
182 
183     qemu_register_reset(via_reset, d);
184     bmdma_setup_bar(d);
185     pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
186 
187     vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d);
188 
189     vt82c686b_init_ports(d);
190 
191     return 0;
192 }
193 
194 static void vt82c686b_ide_exitfn(PCIDevice *dev)
195 {
196     PCIIDEState *d = PCI_IDE(dev);
197     unsigned i;
198 
199     for (i = 0; i < 2; ++i) {
200         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
201         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
202     }
203 }
204 
205 void vt82c686b_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
206 {
207     PCIDevice *dev;
208 
209     dev = pci_create_simple(bus, devfn, "via-ide");
210     pci_ide_create_devs(dev, hd_table);
211 }
212 
213 static void via_ide_class_init(ObjectClass *klass, void *data)
214 {
215     DeviceClass *dc = DEVICE_CLASS(klass);
216     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
217 
218     k->init = vt82c686b_ide_initfn;
219     k->exit = vt82c686b_ide_exitfn;
220     k->vendor_id = PCI_VENDOR_ID_VIA;
221     k->device_id = PCI_DEVICE_ID_VIA_IDE;
222     k->revision = 0x06;
223     k->class_id = PCI_CLASS_STORAGE_IDE;
224     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
225 }
226 
227 static const TypeInfo via_ide_info = {
228     .name          = "via-ide",
229     .parent        = TYPE_PCI_IDE,
230     .class_init    = via_ide_class_init,
231 };
232 
233 static void via_ide_register_types(void)
234 {
235     type_register_static(&via_ide_info);
236 }
237 
238 type_init(via_ide_register_types)
239