xref: /openbmc/qemu/hw/ide/via.c (revision 083fab02)
1 /*
2  * QEMU IDE Emulation: PCI VIA82C686B support.
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  * Copyright (c) 2006 Openedhand Ltd.
6  * Copyright (c) 2010 Huacai Chen <zltjiangshi@gmail.com>
7  *
8  * Permission is hereby granted, free of charge, to any person obtaining a copy
9  * of this software and associated documentation files (the "Software"), to deal
10  * in the Software without restriction, including without limitation the rights
11  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12  * copies of the Software, and to permit persons to whom the Software is
13  * furnished to do so, subject to the following conditions:
14  *
15  * The above copyright notice and this permission notice shall be included in
16  * all copies or substantial portions of the Software.
17  *
18  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24  * THE SOFTWARE.
25  */
26 #include "qemu/osdep.h"
27 #include "hw/hw.h"
28 #include "hw/i386/pc.h"
29 #include "hw/pci/pci.h"
30 #include "hw/isa/isa.h"
31 #include "sysemu/block-backend.h"
32 #include "sysemu/sysemu.h"
33 #include "sysemu/dma.h"
34 
35 #include "hw/ide/pci.h"
36 #include "trace.h"
37 
38 static uint64_t bmdma_read(void *opaque, hwaddr addr,
39                            unsigned size)
40 {
41     BMDMAState *bm = opaque;
42     uint32_t val;
43 
44     if (size != 1) {
45         return ((uint64_t)1 << (size * 8)) - 1;
46     }
47 
48     switch (addr & 3) {
49     case 0:
50         val = bm->cmd;
51         break;
52     case 2:
53         val = bm->status;
54         break;
55     default:
56         val = 0xff;
57         break;
58     }
59 
60     trace_bmdma_read_via(addr, val);
61     return val;
62 }
63 
64 static void bmdma_write(void *opaque, hwaddr addr,
65                         uint64_t val, unsigned size)
66 {
67     BMDMAState *bm = opaque;
68 
69     if (size != 1) {
70         return;
71     }
72 
73     trace_bmdma_write_via(addr, val);
74     switch (addr & 3) {
75     case 0:
76         bmdma_cmd_writeb(bm, val);
77         break;
78     case 2:
79         bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
80         break;
81     default:;
82     }
83 }
84 
85 static const MemoryRegionOps via_bmdma_ops = {
86     .read = bmdma_read,
87     .write = bmdma_write,
88 };
89 
90 static void bmdma_setup_bar(PCIIDEState *d)
91 {
92     int i;
93 
94     memory_region_init(&d->bmdma_bar, OBJECT(d), "via-bmdma-container", 16);
95     for(i = 0;i < 2; i++) {
96         BMDMAState *bm = &d->bmdma[i];
97 
98         memory_region_init_io(&bm->extra_io, OBJECT(d), &via_bmdma_ops, bm,
99                               "via-bmdma", 4);
100         memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
101         memory_region_init_io(&bm->addr_ioport, OBJECT(d),
102                               &bmdma_addr_ioport_ops, bm, "bmdma", 4);
103         memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
104     }
105 }
106 
107 static void via_reset(void *opaque)
108 {
109     PCIIDEState *d = opaque;
110     PCIDevice *pd = PCI_DEVICE(d);
111     uint8_t *pci_conf = pd->config;
112     int i;
113 
114     for (i = 0; i < 2; i++) {
115         ide_bus_reset(&d->bus[i]);
116     }
117 
118     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_WAIT);
119     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
120                  PCI_STATUS_DEVSEL_MEDIUM);
121 
122     pci_set_long(pci_conf + PCI_BASE_ADDRESS_0, 0x000001f0);
123     pci_set_long(pci_conf + PCI_BASE_ADDRESS_1, 0x000003f4);
124     pci_set_long(pci_conf + PCI_BASE_ADDRESS_2, 0x00000170);
125     pci_set_long(pci_conf + PCI_BASE_ADDRESS_3, 0x00000374);
126     pci_set_long(pci_conf + PCI_BASE_ADDRESS_4, 0x0000cc01); /* BMIBA: 20-23h */
127     pci_set_long(pci_conf + PCI_INTERRUPT_LINE, 0x0000010e);
128 
129     /* IDE chip enable, IDE configuration 1/2, IDE FIFO Configuration*/
130     pci_set_long(pci_conf + 0x40, 0x0a090600);
131     /* IDE misc configuration 1/2/3 */
132     pci_set_long(pci_conf + 0x44, 0x00c00068);
133     /* IDE Timing control */
134     pci_set_long(pci_conf + 0x48, 0xa8a8a8a8);
135     /* IDE Address Setup Time */
136     pci_set_long(pci_conf + 0x4c, 0x000000ff);
137     /* UltraDMA Extended Timing Control*/
138     pci_set_long(pci_conf + 0x50, 0x07070707);
139     /* UltraDMA FIFO Control */
140     pci_set_long(pci_conf + 0x54, 0x00000004);
141     /* IDE primary sector size */
142     pci_set_long(pci_conf + 0x60, 0x00000200);
143     /* IDE secondary sector size */
144     pci_set_long(pci_conf + 0x68, 0x00000200);
145     /* PCI PM Block */
146     pci_set_long(pci_conf + 0xc0, 0x00020001);
147 }
148 
149 static void vt82c686b_init_ports(PCIIDEState *d) {
150     static const struct {
151         int iobase;
152         int iobase2;
153         int isairq;
154     } port_info[] = {
155         {0x1f0, 0x3f6, 14},
156         {0x170, 0x376, 15},
157     };
158     int i;
159 
160     for (i = 0; i < 2; i++) {
161         ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(d), i, 2);
162         ide_init_ioport(&d->bus[i], NULL, port_info[i].iobase,
163                         port_info[i].iobase2);
164         ide_init2(&d->bus[i], isa_get_irq(NULL, port_info[i].isairq));
165 
166         bmdma_init(&d->bus[i], &d->bmdma[i], d);
167         d->bmdma[i].bus = &d->bus[i];
168         ide_register_restart_cb(&d->bus[i]);
169     }
170 }
171 
172 /* via ide func */
173 static void vt82c686b_ide_realize(PCIDevice *dev, Error **errp)
174 {
175     PCIIDEState *d = PCI_IDE(dev);
176     uint8_t *pci_conf = dev->config;
177 
178     pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy ATA mode */
179     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
180 
181     qemu_register_reset(via_reset, d);
182     bmdma_setup_bar(d);
183     pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
184 
185     vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d);
186 
187     vt82c686b_init_ports(d);
188 }
189 
190 static void vt82c686b_ide_exitfn(PCIDevice *dev)
191 {
192     PCIIDEState *d = PCI_IDE(dev);
193     unsigned i;
194 
195     for (i = 0; i < 2; ++i) {
196         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
197         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
198     }
199 }
200 
201 void vt82c686b_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
202 {
203     PCIDevice *dev;
204 
205     dev = pci_create_simple(bus, devfn, "via-ide");
206     pci_ide_create_devs(dev, hd_table);
207 }
208 
209 static void via_ide_class_init(ObjectClass *klass, void *data)
210 {
211     DeviceClass *dc = DEVICE_CLASS(klass);
212     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
213 
214     k->realize = vt82c686b_ide_realize;
215     k->exit = vt82c686b_ide_exitfn;
216     k->vendor_id = PCI_VENDOR_ID_VIA;
217     k->device_id = PCI_DEVICE_ID_VIA_IDE;
218     k->revision = 0x06;
219     k->class_id = PCI_CLASS_STORAGE_IDE;
220     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
221 }
222 
223 static const TypeInfo via_ide_info = {
224     .name          = "via-ide",
225     .parent        = TYPE_PCI_IDE,
226     .class_init    = via_ide_class_init,
227 };
228 
229 static void via_ide_register_types(void)
230 {
231     type_register_static(&via_ide_info);
232 }
233 
234 type_init(via_ide_register_types)
235