xref: /openbmc/qemu/hw/ide/piix.c (revision c79aa350)
1 /*
2  * QEMU IDE Emulation: PCI PIIX3/4 support.
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  * Copyright (c) 2006 Openedhand Ltd.
6  *
7  * Permission is hereby granted, free of charge, to any person obtaining a copy
8  * of this software and associated documentation files (the "Software"), to deal
9  * in the Software without restriction, including without limitation the rights
10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11  * copies of the Software, and to permit persons to whom the Software is
12  * furnished to do so, subject to the following conditions:
13  *
14  * The above copyright notice and this permission notice shall be included in
15  * all copies or substantial portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23  * THE SOFTWARE.
24  *
25  * References:
26  *  [1] 82371FB (PIIX) AND 82371SB (PIIX3) PCI ISA IDE XCELERATOR,
27  *      290550-002, Intel Corporation, April 1997.
28  */
29 
30 #include "qemu/osdep.h"
31 #include "hw/pci/pci.h"
32 #include "migration/vmstate.h"
33 #include "qapi/error.h"
34 #include "qemu/module.h"
35 #include "sysemu/block-backend.h"
36 #include "sysemu/blockdev.h"
37 #include "sysemu/dma.h"
38 
39 #include "hw/ide/piix.h"
40 #include "hw/ide/pci.h"
41 #include "trace.h"
42 
43 static uint64_t bmdma_read(void *opaque, hwaddr addr, unsigned size)
44 {
45     BMDMAState *bm = opaque;
46     uint32_t val;
47 
48     if (size != 1) {
49         return ((uint64_t)1 << (size * 8)) - 1;
50     }
51 
52     switch(addr & 3) {
53     case 0:
54         val = bm->cmd;
55         break;
56     case 2:
57         val = bm->status;
58         break;
59     default:
60         val = 0xff;
61         break;
62     }
63 
64     trace_bmdma_read(addr, val);
65     return val;
66 }
67 
68 static void bmdma_write(void *opaque, hwaddr addr,
69                         uint64_t val, unsigned size)
70 {
71     BMDMAState *bm = opaque;
72 
73     if (size != 1) {
74         return;
75     }
76 
77     trace_bmdma_write(addr, val);
78 
79     switch(addr & 3) {
80     case 0:
81         bmdma_cmd_writeb(bm, val);
82         break;
83     case 2:
84         bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
85         break;
86     }
87 }
88 
89 static const MemoryRegionOps piix_bmdma_ops = {
90     .read = bmdma_read,
91     .write = bmdma_write,
92 };
93 
94 static void bmdma_setup_bar(PCIIDEState *d)
95 {
96     int i;
97 
98     memory_region_init(&d->bmdma_bar, OBJECT(d), "piix-bmdma-container", 16);
99     for(i = 0;i < 2; i++) {
100         BMDMAState *bm = &d->bmdma[i];
101 
102         memory_region_init_io(&bm->extra_io, OBJECT(d), &piix_bmdma_ops, bm,
103                               "piix-bmdma", 4);
104         memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
105         memory_region_init_io(&bm->addr_ioport, OBJECT(d),
106                               &bmdma_addr_ioport_ops, bm, "bmdma", 4);
107         memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
108     }
109 }
110 
111 static void piix_ide_reset(DeviceState *dev)
112 {
113     PCIIDEState *d = PCI_IDE(dev);
114     PCIDevice *pd = PCI_DEVICE(d);
115     uint8_t *pci_conf = pd->config;
116     int i;
117 
118     for (i = 0; i < 2; i++) {
119         ide_bus_reset(&d->bus[i]);
120     }
121 
122     /* PCI command register default value (0000h) per [1, p.48].  */
123     pci_set_word(pci_conf + PCI_COMMAND, 0x0000);
124     pci_set_word(pci_conf + PCI_STATUS,
125                  PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_FAST_BACK);
126     pci_set_byte(pci_conf + 0x20, 0x01);  /* BMIBA: 20-23h */
127 }
128 
129 static int pci_piix_init_ports(PCIIDEState *d)
130 {
131     static const struct {
132         int iobase;
133         int iobase2;
134         int isairq;
135     } port_info[] = {
136         {0x1f0, 0x3f6, 14},
137         {0x170, 0x376, 15},
138     };
139     int i, ret;
140 
141     for (i = 0; i < 2; i++) {
142         ide_bus_init(&d->bus[i], sizeof(d->bus[i]), DEVICE(d), i, 2);
143         ret = ide_init_ioport(&d->bus[i], NULL, port_info[i].iobase,
144                               port_info[i].iobase2);
145         if (ret) {
146             return ret;
147         }
148         ide_init2(&d->bus[i], isa_get_irq(NULL, port_info[i].isairq));
149 
150         bmdma_init(&d->bus[i], &d->bmdma[i], d);
151         d->bmdma[i].bus = &d->bus[i];
152         ide_register_restart_cb(&d->bus[i]);
153     }
154 
155     return 0;
156 }
157 
158 static void pci_piix_ide_realize(PCIDevice *dev, Error **errp)
159 {
160     PCIIDEState *d = PCI_IDE(dev);
161     uint8_t *pci_conf = dev->config;
162     int rc;
163 
164     pci_conf[PCI_CLASS_PROG] = 0x80; // legacy ATA mode
165 
166     bmdma_setup_bar(d);
167     pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
168 
169     vmstate_register(VMSTATE_IF(dev), 0, &vmstate_ide_pci, d);
170 
171     rc = pci_piix_init_ports(d);
172     if (rc) {
173         error_setg_errno(errp, -rc, "Failed to realize %s",
174                          object_get_typename(OBJECT(dev)));
175     }
176 }
177 
178 static void pci_piix_ide_exitfn(PCIDevice *dev)
179 {
180     PCIIDEState *d = PCI_IDE(dev);
181     unsigned i;
182 
183     for (i = 0; i < 2; ++i) {
184         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
185         memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
186     }
187 }
188 
189 /* NOTE: for the PIIX3, the IRQs and IOports are hardcoded */
190 static void piix3_ide_class_init(ObjectClass *klass, void *data)
191 {
192     DeviceClass *dc = DEVICE_CLASS(klass);
193     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
194 
195     dc->reset = piix_ide_reset;
196     k->realize = pci_piix_ide_realize;
197     k->exit = pci_piix_ide_exitfn;
198     k->vendor_id = PCI_VENDOR_ID_INTEL;
199     k->device_id = PCI_DEVICE_ID_INTEL_82371SB_1;
200     k->class_id = PCI_CLASS_STORAGE_IDE;
201     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
202     dc->hotpluggable = false;
203 }
204 
205 static const TypeInfo piix3_ide_info = {
206     .name          = TYPE_PIIX3_IDE,
207     .parent        = TYPE_PCI_IDE,
208     .class_init    = piix3_ide_class_init,
209 };
210 
211 /* NOTE: for the PIIX4, the IRQs and IOports are hardcoded */
212 static void piix4_ide_class_init(ObjectClass *klass, void *data)
213 {
214     DeviceClass *dc = DEVICE_CLASS(klass);
215     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
216 
217     dc->reset = piix_ide_reset;
218     k->realize = pci_piix_ide_realize;
219     k->exit = pci_piix_ide_exitfn;
220     k->vendor_id = PCI_VENDOR_ID_INTEL;
221     k->device_id = PCI_DEVICE_ID_INTEL_82371AB;
222     k->class_id = PCI_CLASS_STORAGE_IDE;
223     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
224     dc->hotpluggable = false;
225 }
226 
227 static const TypeInfo piix4_ide_info = {
228     .name          = TYPE_PIIX4_IDE,
229     .parent        = TYPE_PCI_IDE,
230     .class_init    = piix4_ide_class_init,
231 };
232 
233 static void piix_ide_register_types(void)
234 {
235     type_register_static(&piix3_ide_info);
236     type_register_static(&piix4_ide_info);
237 }
238 
239 type_init(piix_ide_register_types)
240