xref: /openbmc/qemu/hw/ide/ide-internal.h (revision a158c63b)
1 #ifndef HW_IDE_INTERNAL_H
2 #define HW_IDE_INTERNAL_H
3 
4 /*
5  * QEMU IDE Emulation -- internal header file
6  * only files in hw/ide/ are supposed to include this file.
7  * non-internal declarations are in hw/include/ide-*.h
8  */
9 
10 #include "hw/ide/ide-bus.h"
11 
12 /* debug IDE devices */
13 #define USE_DMA_CDROM
14 
15 /* Device/Head ("select") Register */
16 #define ATA_DEV_SELECT          0x10
17 /* ATA1,3: Defined as '1'.
18  * ATA2:   Reserved.
19  * ATA3-7: obsolete. */
20 #define ATA_DEV_ALWAYS_ON       0xA0
21 #define ATA_DEV_LBA             0x40
22 #define ATA_DEV_LBA_MSB         0x0F  /* LBA 24:27 */
23 #define ATA_DEV_HS              0x0F  /* HS 3:0 */
24 
25 
26 /* Bits of HD_STATUS */
27 #define ERR_STAT                0x01
28 #define INDEX_STAT              0x02
29 #define ECC_STAT                0x04    /* Corrected error */
30 #define DRQ_STAT                0x08
31 #define SEEK_STAT               0x10
32 #define SRV_STAT                0x10
33 #define WRERR_STAT              0x20
34 #define READY_STAT              0x40
35 #define BUSY_STAT               0x80
36 
37 /* Bits for HD_ERROR */
38 #define MARK_ERR                0x01    /* Bad address mark */
39 #define TRK0_ERR                0x02    /* couldn't find track 0 */
40 #define ABRT_ERR                0x04    /* Command aborted */
41 #define MCR_ERR                 0x08    /* media change request */
42 #define ID_ERR                  0x10    /* ID field not found */
43 #define MC_ERR                  0x20    /* media changed */
44 #define ECC_ERR                 0x40    /* Uncorrectable ECC error */
45 #define BBD_ERR                 0x80    /* pre-EIDE meaning:  block marked bad */
46 #define ICRC_ERR                0x80    /* new meaning:  CRC error during transfer */
47 
48 /* Bits of HD_NSECTOR */
49 #define CD                      0x01
50 #define IO                      0x02
51 #define REL                     0x04
52 #define TAG_MASK                0xf8
53 
54 /* Bits of Device Control register */
55 #define IDE_CTRL_HOB            0x80
56 #define IDE_CTRL_RESET          0x04
57 #define IDE_CTRL_DISABLE_IRQ    0x02
58 
59 /* ACS-2 T13/2015-D Table B.2 Command codes */
60 #define WIN_NOP                         0x00
61 /* reserved                             0x01..0x02 */
62 #define CFA_REQ_EXT_ERROR_CODE          0x03 /* CFA Request Extended Error Code */
63 /* reserved                             0x04..0x05 */
64 #define WIN_DSM                         0x06
65 /* reserved                             0x07 */
66 #define WIN_DEVICE_RESET                0x08
67 /* reserved                             0x09..0x0a */
68 /* REQUEST SENSE DATA EXT               0x0B */
69 /* reserved                             0x0C..0x0F */
70 #define WIN_RECAL                       0x10 /* obsolete since ATA4 */
71 /* obsolete since ATA3, retired in ATA4 0x11..0x1F */
72 #define WIN_READ                        0x20 /* 28-Bit */
73 #define WIN_READ_ONCE                   0x21 /* 28-Bit w/o retries, obsolete since ATA5 */
74 /* obsolete since ATA4                  0x22..0x23 */
75 #define WIN_READ_EXT                    0x24 /* 48-Bit */
76 #define WIN_READDMA_EXT                 0x25 /* 48-Bit */
77 #define WIN_READDMA_QUEUED_EXT          0x26 /* 48-Bit, obsolete since ACS2 */
78 #define WIN_READ_NATIVE_MAX_EXT         0x27 /* 48-Bit */
79 /* reserved                             0x28 */
80 #define WIN_MULTREAD_EXT                0x29 /* 48-Bit */
81 /* READ STREAM DMA EXT                  0x2A */
82 /* READ STREAM EXT                      0x2B */
83 /* reserved                             0x2C..0x2E */
84 /* READ LOG EXT                         0x2F */
85 #define WIN_WRITE                       0x30 /* 28-Bit */
86 #define WIN_WRITE_ONCE                  0x31 /* 28-Bit w/o retries, obsolete since ATA5 */
87 /* obsolete since ATA4                  0x32..0x33 */
88 #define WIN_WRITE_EXT                   0x34 /* 48-Bit */
89 #define WIN_WRITEDMA_EXT                0x35 /* 48-Bit */
90 #define WIN_WRITEDMA_QUEUED_EXT         0x36 /* 48-Bit */
91 #define WIN_SET_MAX_EXT                 0x37 /* 48-Bit, obsolete since ACS2 */
92 #define WIN_SET_MAX_EXT                 0x37 /* 48-Bit */
93 #define CFA_WRITE_SECT_WO_ERASE         0x38 /* CFA Write Sectors without erase */
94 #define WIN_MULTWRITE_EXT               0x39 /* 48-Bit */
95 /* WRITE STREAM DMA EXT                 0x3A */
96 /* WRITE STREAM EXT                     0x3B */
97 #define WIN_WRITE_VERIFY                0x3C /* 28-Bit, obsolete since ATA4 */
98 /* WRITE DMA FUA EXT                    0x3D */
99 /* obsolete since ACS2                  0x3E */
100 /* WRITE LOG EXT                        0x3F */
101 #define WIN_VERIFY                      0x40 /* 28-Bit - Read Verify Sectors */
102 #define WIN_VERIFY_ONCE                 0x41 /* 28-Bit - w/o retries, obsolete since ATA5 */
103 #define WIN_VERIFY_EXT                  0x42 /* 48-Bit */
104 /* reserved                             0x43..0x44 */
105 /* WRITE UNCORRECTABLE EXT              0x45 */
106 /* reserved                             0x46 */
107 /* READ LOG DMA EXT                     0x47 */
108 /* reserved                             0x48..0x4F */
109 /* obsolete since ATA4                  0x50 */
110 /* CONFIGURE STREAM                     0x51 */
111 /* reserved                             0x52..0x56 */
112 /* WRITE LOG DMA EXT                    0x57 */
113 /* reserved                             0x58..0x5A */
114 /* TRUSTED NON DATA                     0x5B */
115 /* TRUSTED RECEIVE                      0x5C */
116 /* TRUSTED RECEIVE DMA                  0x5D */
117 /* TRUSTED SEND                         0x5E */
118 /* TRUSTED SEND DMA                     0x5F */
119 /* READ FPDMA QUEUED                    0x60 */
120 /* WRITE FPDMA QUEUED                   0x61 */
121 /* reserved                             0x62->0x6F */
122 #define WIN_SEEK                        0x70 /* obsolete since ATA7 */
123 /* reserved                             0x71-0x7F */
124 /* vendor specific                      0x80-0x86 */
125 #define CFA_TRANSLATE_SECTOR            0x87 /* CFA Translate Sector */
126 /* vendor specific                      0x88-0x8F */
127 #define WIN_DIAGNOSE                    0x90
128 #define WIN_SPECIFY                     0x91 /* set drive geometry translation, obsolete since ATA6 */
129 #define WIN_DOWNLOAD_MICROCODE          0x92
130 /* DOWNLOAD MICROCODE DMA               0x93 */
131 #define WIN_STANDBYNOW2                 0x94 /* retired in ATA4 */
132 #define WIN_IDLEIMMEDIATE2              0x95 /* force drive to become "ready", retired in ATA4 */
133 #define WIN_STANDBY2                    0x96 /* retired in ATA4 */
134 #define WIN_SETIDLE2                    0x97 /* retired in ATA4 */
135 #define WIN_CHECKPOWERMODE2             0x98 /* retired in ATA4 */
136 #define WIN_SLEEPNOW2                   0x99 /* retired in ATA4 */
137 /* vendor specific                      0x9A */
138 /* reserved                             0x9B..0x9F */
139 #define WIN_PACKETCMD                   0xA0 /* Send a packet command. */
140 #define WIN_PIDENTIFY                   0xA1 /* identify ATAPI device */
141 #define WIN_QUEUED_SERVICE              0xA2 /* obsolete since ACS2 */
142 /* reserved                             0xA3..0xAF */
143 #define WIN_SMART                       0xB0 /* self-monitoring and reporting */
144 /* Device Configuration Overlay         0xB1 */
145 /* reserved                             0xB2..0xB3 */
146 /* Sanitize Device                      0xB4 */
147 /* reserved                             0xB5 */
148 /* NV Cache                             0xB6 */
149 /* reserved for CFA                     0xB7..0xBB */
150 #define CFA_ACCESS_METADATA_STORAGE     0xB8
151 /* reserved                             0xBC..0xBF */
152 #define CFA_ERASE_SECTORS               0xC0 /* microdrives implement as NOP */
153 /* vendor specific                      0xC1..0xC3 */
154 #define WIN_MULTREAD                    0xC4 /* read sectors using multiple mode*/
155 #define WIN_MULTWRITE                   0xC5 /* write sectors using multiple mode */
156 #define WIN_SETMULT                     0xC6 /* enable/disable multiple mode */
157 #define WIN_READDMA_QUEUED              0xC7 /* read sectors using Queued DMA transfers, obsolete since ACS2 */
158 #define WIN_READDMA                     0xC8 /* read sectors using DMA transfers */
159 #define WIN_READDMA_ONCE                0xC9 /* 28-Bit - w/o retries, obsolete since ATA5 */
160 #define WIN_WRITEDMA                    0xCA /* write sectors using DMA transfers */
161 #define WIN_WRITEDMA_ONCE               0xCB /* 28-Bit - w/o retries, obsolete since ATA5 */
162 #define WIN_WRITEDMA_QUEUED             0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */
163 #define CFA_WRITE_MULTI_WO_ERASE        0xCD /* CFA Write multiple without erase */
164 /* WRITE MULTIPLE FUA EXT               0xCE */
165 /* reserved                             0xCF..0xDO */
166 /* CHECK MEDIA CARD TYPE                0xD1 */
167 /* reserved for media card pass through 0xD2..0xD4 */
168 /* reserved                             0xD5..0xD9 */
169 #define WIN_GETMEDIASTATUS              0xDA /* obsolete since ATA8 */
170 /* obsolete since ATA3, retired in ATA4 0xDB..0xDD */
171 #define WIN_DOORLOCK                    0xDE /* lock door on removable drives, obsolete since ATA8 */
172 #define WIN_DOORUNLOCK                  0xDF /* unlock door on removable drives, obsolete since ATA8 */
173 #define WIN_STANDBYNOW1                 0xE0
174 #define WIN_IDLEIMMEDIATE               0xE1 /* force drive to become "ready" */
175 #define WIN_STANDBY                     0xE2 /* Set device in Standby Mode */
176 #define WIN_SETIDLE1                    0xE3
177 #define WIN_READ_BUFFER                 0xE4 /* force read only 1 sector */
178 #define WIN_CHECKPOWERMODE1             0xE5
179 #define WIN_SLEEPNOW1                   0xE6
180 #define WIN_FLUSH_CACHE                 0xE7
181 #define WIN_WRITE_BUFFER                0xE8 /* force write only 1 sector */
182 /* READ BUFFER DMA                      0xE9 */
183 #define WIN_FLUSH_CACHE_EXT             0xEA /* 48-Bit */
184 /* WRITE BUFFER DMA                     0xEB */
185 #define WIN_IDENTIFY                    0xEC /* ask drive to identify itself */
186 #define WIN_MEDIAEJECT                  0xED /* obsolete since ATA8 */
187 /* obsolete since ATA4                  0xEE */
188 #define WIN_SETFEATURES                 0xEF /* set special drive features */
189 #define IBM_SENSE_CONDITION             0xF0 /* measure disk temperature, vendor specific */
190 #define WIN_SECURITY_SET_PASS           0xF1
191 #define WIN_SECURITY_UNLOCK             0xF2
192 #define WIN_SECURITY_ERASE_PREPARE      0xF3
193 #define WIN_SECURITY_ERASE_UNIT         0xF4
194 #define WIN_SECURITY_FREEZE_LOCK        0xF5
195 #define CFA_WEAR_LEVEL                  0xF5 /* microdrives implement as NOP; not specified in T13! */
196 #define WIN_SECURITY_DISABLE            0xF6
197 /* vendor specific                      0xF7 */
198 #define WIN_READ_NATIVE_MAX             0xF8 /* return the native maximum address */
199 #define WIN_SET_MAX                     0xF9
200 /* vendor specific                      0xFA..0xFF */
201 
202 /* set to 1 set disable mult support */
203 #define MAX_MULT_SECTORS 16
204 
205 #define IDE_DMA_BUF_SECTORS 256
206 
207 /* feature values for Data Set Management */
208 #define DSM_TRIM                        0x01
209 
210 #if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
211 #error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
212 #endif
213 
214 /* ATAPI defines */
215 
216 #define ATAPI_PACKET_SIZE 12
217 
218 /* The generic packet command opcodes for CD/DVD Logical Units,
219  * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
220 #define GPCMD_BLANK                         0xa1
221 #define GPCMD_CLOSE_TRACK                   0x5b
222 #define GPCMD_FLUSH_CACHE                   0x35
223 #define GPCMD_FORMAT_UNIT                   0x04
224 #define GPCMD_GET_CONFIGURATION             0x46
225 #define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
226 #define GPCMD_GET_PERFORMANCE               0xac
227 #define GPCMD_INQUIRY                       0x12
228 #define GPCMD_LOAD_UNLOAD                   0xa6
229 #define GPCMD_MECHANISM_STATUS              0xbd
230 #define GPCMD_MODE_SELECT_10                0x55
231 #define GPCMD_MODE_SENSE_10                 0x5a
232 #define GPCMD_PAUSE_RESUME                  0x4b
233 #define GPCMD_PLAY_AUDIO_10                 0x45
234 #define GPCMD_PLAY_AUDIO_MSF                0x47
235 #define GPCMD_PLAY_AUDIO_TI                 0x48
236 #define GPCMD_PLAY_CD                       0xbc
237 #define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
238 #define GPCMD_READ_10                       0x28
239 #define GPCMD_READ_12                       0xa8
240 #define GPCMD_READ_CDVD_CAPACITY            0x25
241 #define GPCMD_READ_CD                       0xbe
242 #define GPCMD_READ_CD_MSF                   0xb9
243 #define GPCMD_READ_DISC_INFO                0x51
244 #define GPCMD_READ_DVD_STRUCTURE            0xad
245 #define GPCMD_READ_FORMAT_CAPACITIES        0x23
246 #define GPCMD_READ_HEADER                   0x44
247 #define GPCMD_READ_TRACK_RZONE_INFO         0x52
248 #define GPCMD_READ_SUBCHANNEL               0x42
249 #define GPCMD_READ_TOC_PMA_ATIP             0x43
250 #define GPCMD_REPAIR_RZONE_TRACK            0x58
251 #define GPCMD_REPORT_KEY                    0xa4
252 #define GPCMD_REQUEST_SENSE                 0x03
253 #define GPCMD_RESERVE_RZONE_TRACK           0x53
254 #define GPCMD_SCAN                          0xba
255 #define GPCMD_SEEK                          0x2b
256 #define GPCMD_SEND_DVD_STRUCTURE            0xad
257 #define GPCMD_SEND_EVENT                    0xa2
258 #define GPCMD_SEND_KEY                      0xa3
259 #define GPCMD_SEND_OPC                      0x54
260 #define GPCMD_SET_READ_AHEAD                0xa7
261 #define GPCMD_SET_STREAMING                 0xb6
262 #define GPCMD_START_STOP_UNIT               0x1b
263 #define GPCMD_STOP_PLAY_SCAN                0x4e
264 #define GPCMD_TEST_UNIT_READY               0x00
265 #define GPCMD_VERIFY_10                     0x2f
266 #define GPCMD_WRITE_10                      0x2a
267 #define GPCMD_WRITE_AND_VERIFY_10           0x2e
268 /* This is listed as optional in ATAPI 2.6, but is (curiously)
269  * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
270  * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
271  * drives support it. */
272 #define GPCMD_SET_SPEED                     0xbb
273 /* This seems to be a SCSI specific CD-ROM opcode
274  * to play data at track/index */
275 #define GPCMD_PLAYAUDIO_TI                  0x48
276 /*
277  * From MS Media Status Notification Support Specification. For
278  * older drives only.
279  */
280 #define GPCMD_GET_MEDIA_STATUS              0xda
281 #define GPCMD_MODE_SENSE_6                  0x1a
282 
283 #define ATAPI_INT_REASON_CD             0x01 /* 0 = data transfer */
284 #define ATAPI_INT_REASON_IO             0x02 /* 1 = transfer to the host */
285 #define ATAPI_INT_REASON_REL            0x04
286 #define ATAPI_INT_REASON_TAG            0xf8
287 
288 /* same constants as bochs */
289 #define ASC_NO_SEEK_COMPLETE                 0x02
290 #define ASC_ILLEGAL_OPCODE                   0x20
291 #define ASC_LOGICAL_BLOCK_OOR                0x21
292 #define ASC_INV_FIELD_IN_CMD_PACKET          0x24
293 #define ASC_MEDIUM_MAY_HAVE_CHANGED          0x28
294 #define ASC_INCOMPATIBLE_FORMAT              0x30
295 #define ASC_MEDIUM_NOT_PRESENT               0x3a
296 #define ASC_SAVING_PARAMETERS_NOT_SUPPORTED  0x39
297 #define ASC_DATA_PHASE_ERROR                 0x4b
298 #define ASC_MEDIA_REMOVAL_PREVENTED          0x53
299 
300 #define CFA_NO_ERROR            0x00
301 #define CFA_MISC_ERROR          0x09
302 #define CFA_INVALID_COMMAND     0x20
303 #define CFA_INVALID_ADDRESS     0x21
304 #define CFA_ADDRESS_OVERFLOW    0x2f
305 
306 #define SMART_READ_DATA       0xd0
307 #define SMART_READ_THRESH     0xd1
308 #define SMART_ATTR_AUTOSAVE   0xd2
309 #define SMART_SAVE_ATTR       0xd3
310 #define SMART_EXECUTE_OFFLINE 0xd4
311 #define SMART_READ_LOG        0xd5
312 #define SMART_WRITE_LOG       0xd6
313 #define SMART_ENABLE          0xd8
314 #define SMART_DISABLE         0xd9
315 #define SMART_STATUS          0xda
316 
317 extern const char *IDE_DMA_CMD_lookup[IDE_DMA__COUNT];
318 
319 extern const MemoryRegionPortio ide_portio_list[];
320 extern const MemoryRegionPortio ide_portio2_list[];
321 
322 #define ide_cmd_is_read(s) \
323         ((s)->dma_cmd == IDE_DMA_READ)
324 
325 typedef struct IDEBufferedRequest {
326     QLIST_ENTRY(IDEBufferedRequest) list;
327     QEMUIOVector qiov;
328     QEMUIOVector *original_qiov;
329     BlockCompletionFunc *original_cb;
330     void *original_opaque;
331     bool orphaned;
332 } IDEBufferedRequest;
333 
334 /* These are used for the error_status field of IDEBus */
335 #define IDE_RETRY_MASK 0xf8
336 #define IDE_RETRY_DMA  0x08
337 #define IDE_RETRY_PIO  0x10
338 #define IDE_RETRY_ATAPI 0x20 /* reused IDE_RETRY_READ bit */
339 #define IDE_RETRY_READ  0x20
340 #define IDE_RETRY_FLUSH 0x40
341 #define IDE_RETRY_TRIM 0x80
342 #define IDE_RETRY_HBA  0x100
343 
344 #define IS_IDE_RETRY_DMA(_status) \
345     ((_status) & IDE_RETRY_DMA)
346 
347 #define IS_IDE_RETRY_PIO(_status) \
348     ((_status) & IDE_RETRY_PIO)
349 
350 /*
351  * The method of the IDE_RETRY_ATAPI determination is to use a previously
352  * impossible bit combination as a new status value.
353  */
354 #define IS_IDE_RETRY_ATAPI(_status)   \
355     (((_status) & IDE_RETRY_MASK) == IDE_RETRY_ATAPI)
356 
357 static inline uint8_t ide_dma_cmd_to_retry(uint8_t dma_cmd)
358 {
359     switch (dma_cmd) {
360     case IDE_DMA_READ:
361         return IDE_RETRY_DMA | IDE_RETRY_READ;
362     case IDE_DMA_WRITE:
363         return IDE_RETRY_DMA;
364     case IDE_DMA_TRIM:
365         return IDE_RETRY_DMA | IDE_RETRY_TRIM;
366     case IDE_DMA_ATAPI:
367         return IDE_RETRY_ATAPI;
368     default:
369         break;
370     }
371     return 0;
372 }
373 
374 static inline IDEState *ide_bus_active_if(IDEBus *bus)
375 {
376     return bus->ifs + bus->unit;
377 }
378 
379 /* hw/ide/core.c */
380 extern const VMStateDescription vmstate_ide_bus;
381 
382 #define VMSTATE_IDE_BUS(_field, _state)                          \
383     VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)
384 
385 #define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num)              \
386     VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)
387 
388 extern const VMStateDescription vmstate_ide_drive;
389 
390 #define VMSTATE_IDE_DRIVES(_field, _state) \
391     VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)
392 
393 #define VMSTATE_IDE_DRIVE(_field, _state) \
394     VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_drive, IDEState)
395 
396 void ide_bus_reset(IDEBus *bus);
397 int64_t ide_get_sector(IDEState *s);
398 void ide_set_sector(IDEState *s, int64_t sector_num);
399 
400 void ide_start_dma(IDEState *s, BlockCompletionFunc *cb);
401 void dma_buf_commit(IDEState *s, uint32_t tx_bytes);
402 void ide_dma_error(IDEState *s);
403 void ide_abort_command(IDEState *s);
404 
405 void ide_atapi_cmd_ok(IDEState *s);
406 void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
407 void ide_atapi_dma_restart(IDEState *s);
408 void ide_atapi_io_error(IDEState *s, int ret);
409 
410 void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
411 uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
412 uint32_t ide_status_read(void *opaque, uint32_t addr);
413 void ide_ctrl_write(void *opaque, uint32_t addr, uint32_t val);
414 void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
415 uint32_t ide_data_readw(void *opaque, uint32_t addr);
416 void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
417 uint32_t ide_data_readl(void *opaque, uint32_t addr);
418 
419 int ide_init_drive(IDEState *s, IDEDevice *dev, IDEDriveKind kind, Error **errp);
420 void ide_exit(IDEState *s);
421 void ide_bus_init_output_irq(IDEBus *bus, qemu_irq irq_out);
422 int ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
423 void ide_bus_set_irq(IDEBus *bus);
424 void ide_bus_register_restart_cb(IDEBus *bus);
425 
426 void ide_bus_exec_cmd(IDEBus *bus, uint32_t val);
427 
428 void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
429                         EndTransferFunc *end_transfer_func);
430 bool ide_transfer_start_norecurse(IDEState *s, uint8_t *buf, int size,
431                                   EndTransferFunc *end_transfer_func);
432 void ide_transfer_stop(IDEState *s);
433 void ide_set_inactive(IDEState *s, bool more);
434 BlockAIOCB *ide_issue_trim(
435         int64_t offset, QEMUIOVector *qiov,
436         BlockCompletionFunc *cb, void *cb_opaque, void *opaque);
437 BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num,
438                                QEMUIOVector *iov, int nb_sectors,
439                                BlockCompletionFunc *cb, void *opaque);
440 void ide_cancel_dma_sync(IDEState *s);
441 
442 /* hw/ide/atapi.c */
443 void ide_atapi_cmd(IDEState *s);
444 void ide_atapi_cmd_reply_end(IDEState *s);
445 
446 int ide_handle_rw_error(IDEState *s, int error, int op);
447 
448 #endif /* HW_IDE_INTERNAL_H */
449