xref: /openbmc/qemu/hw/ide/ich.c (revision f1733749)
1 /*
2  * QEMU ICH Emulation
3  *
4  * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de>
5  * Copyright (c) 2010 Alexander Graf <agraf@suse.de>
6  *
7  * This library is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU Lesser General Public
9  * License as published by the Free Software Foundation; either
10  * version 2 of the License, or (at your option) any later version.
11  *
12  * This library is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * Lesser General Public License for more details.
16  *
17  * You should have received a copy of the GNU Lesser General Public
18  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
19  *
20  *
21  * lspci dump of a ICH-9 real device
22  *
23  * 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
24  *         Subsystem: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922]
25  *         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
26  *         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
27  *         Latency: 0
28  *         Interrupt: pin B routed to IRQ 222
29  *         Region 0: I/O ports at d000 [size=8]
30  *         Region 1: I/O ports at cc00 [size=4]
31  *         Region 2: I/O ports at c880 [size=8]
32  *         Region 3: I/O ports at c800 [size=4]
33  *         Region 4: I/O ports at c480 [size=32]
34  *         Region 5: Memory at febf9000 (32-bit, non-prefetchable) [size=2K]
35  *         Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/16 Enable+
36  *                 Address: fee0f00c  Data: 41d9
37  *         Capabilities: [70] Power Management version 3
38  *                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
39  *                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
40  *         Capabilities: [a8] SATA HBA <?>
41  *         Capabilities: [b0] Vendor Specific Information <?>
42  *         Kernel driver in use: ahci
43  *         Kernel modules: ahci
44  * 00: 86 80 22 29 07 04 b0 02 02 01 06 01 00 00 00 00
45  * 10: 01 d0 00 00 01 cc 00 00 81 c8 00 00 01 c8 00 00
46  * 20: 81 c4 00 00 00 90 bf fe 00 00 00 00 86 80 22 29
47  * 30: 00 00 00 00 80 00 00 00 00 00 00 00 0f 02 00 00
48  * 40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00
49  * 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50  * 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
51  * 70: 01 a8 03 40 08 00 00 00 00 00 00 00 00 00 00 00
52  * 80: 05 70 09 00 0c f0 e0 fe d9 41 00 00 00 00 00 00
53  * 90: 40 00 0f 82 93 01 00 00 00 00 00 00 00 00 00 00
54  * a0: ac 00 00 00 0a 00 12 00 12 b0 10 00 48 00 00 00
55  * b0: 09 00 06 20 00 00 00 00 00 00 00 00 00 00 00 00
56  * c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
57  * d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
58  * e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
59  * f0: 00 00 00 00 00 00 00 00 86 0f 02 00 00 00 00 00
60  *
61  */
62 
63 #include "qemu/osdep.h"
64 #include "hw/pci/msi.h"
65 #include "hw/pci/pci.h"
66 #include "migration/vmstate.h"
67 #include "qemu/module.h"
68 #include "hw/isa/isa.h"
69 #include "sysemu/dma.h"
70 #include "hw/ide/pci.h"
71 #include "ahci_internal.h"
72 
73 #define ICH9_MSI_CAP_OFFSET     0x80
74 #define ICH9_SATA_CAP_OFFSET    0xA8
75 
76 #define ICH9_IDP_BAR            4
77 #define ICH9_MEM_BAR            5
78 
79 #define ICH9_IDP_INDEX          0x10
80 #define ICH9_IDP_INDEX_LOG2     0x04
81 
82 static const VMStateDescription vmstate_ich9_ahci = {
83     .name = "ich9_ahci",
84     .version_id = 1,
85     .fields = (VMStateField[]) {
86         VMSTATE_PCI_DEVICE(parent_obj, AHCIPCIState),
87         VMSTATE_AHCI(ahci, AHCIPCIState),
88         VMSTATE_END_OF_LIST()
89     },
90 };
91 
92 static void pci_ich9_reset(DeviceState *dev)
93 {
94     AHCIPCIState *d = ICH_AHCI(dev);
95 
96     ahci_reset(&d->ahci);
97 }
98 
99 static void pci_ich9_ahci_init(Object *obj)
100 {
101     struct AHCIPCIState *d = ICH_AHCI(obj);
102 
103     ahci_init(&d->ahci, DEVICE(obj));
104 }
105 
106 static void pci_ich9_ahci_realize(PCIDevice *dev, Error **errp)
107 {
108     struct AHCIPCIState *d;
109     int sata_cap_offset;
110     uint8_t *sata_cap;
111     d = ICH_AHCI(dev);
112     int ret;
113 
114     ahci_realize(&d->ahci, DEVICE(dev), pci_get_address_space(dev), 6);
115 
116     pci_config_set_prog_interface(dev->config, AHCI_PROGMODE_MAJOR_REV_1);
117 
118     dev->config[PCI_CACHE_LINE_SIZE] = 0x08;  /* Cache line size */
119     dev->config[PCI_LATENCY_TIMER]   = 0x00;  /* Latency timer */
120     pci_config_set_interrupt_pin(dev->config, 1);
121 
122     /* XXX Software should program this register */
123     dev->config[0x90]   = 1 << 6; /* Address Map Register - AHCI mode */
124 
125     d->ahci.irq = pci_allocate_irq(dev);
126 
127     pci_register_bar(dev, ICH9_IDP_BAR, PCI_BASE_ADDRESS_SPACE_IO,
128                      &d->ahci.idp);
129     pci_register_bar(dev, ICH9_MEM_BAR, PCI_BASE_ADDRESS_SPACE_MEMORY,
130                      &d->ahci.mem);
131 
132     sata_cap_offset = pci_add_capability(dev, PCI_CAP_ID_SATA,
133                                           ICH9_SATA_CAP_OFFSET, SATA_CAP_SIZE,
134                                           errp);
135     if (sata_cap_offset < 0) {
136         return;
137     }
138 
139     sata_cap = dev->config + sata_cap_offset;
140     pci_set_word(sata_cap + SATA_CAP_REV, 0x10);
141     pci_set_long(sata_cap + SATA_CAP_BAR,
142                  (ICH9_IDP_BAR + 0x4) | (ICH9_IDP_INDEX_LOG2 << 4));
143     d->ahci.idp_offset = ICH9_IDP_INDEX;
144 
145     /* Although the AHCI 1.3 specification states that the first capability
146      * should be PMCAP, the Intel ICH9 data sheet specifies that the ICH9
147      * AHCI device puts the MSI capability first, pointing to 0x80. */
148     ret = msi_init(dev, ICH9_MSI_CAP_OFFSET, 1, true, false, NULL);
149     /* Any error other than -ENOTSUP(board's MSI support is broken)
150      * is a programming error.  Fall back to INTx silently on -ENOTSUP */
151     assert(!ret || ret == -ENOTSUP);
152 }
153 
154 static void pci_ich9_uninit(PCIDevice *dev)
155 {
156     struct AHCIPCIState *d;
157     d = ICH_AHCI(dev);
158 
159     msi_uninit(dev);
160     ahci_uninit(&d->ahci);
161     qemu_free_irq(d->ahci.irq);
162 }
163 
164 static void ich_ahci_class_init(ObjectClass *klass, void *data)
165 {
166     DeviceClass *dc = DEVICE_CLASS(klass);
167     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
168 
169     k->realize = pci_ich9_ahci_realize;
170     k->exit = pci_ich9_uninit;
171     k->vendor_id = PCI_VENDOR_ID_INTEL;
172     k->device_id = PCI_DEVICE_ID_INTEL_82801IR;
173     k->revision = 0x02;
174     k->class_id = PCI_CLASS_STORAGE_SATA;
175     dc->vmsd = &vmstate_ich9_ahci;
176     dc->reset = pci_ich9_reset;
177     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
178 }
179 
180 static const TypeInfo ich_ahci_info = {
181     .name          = TYPE_ICH9_AHCI,
182     .parent        = TYPE_PCI_DEVICE,
183     .instance_size = sizeof(AHCIPCIState),
184     .instance_init = pci_ich9_ahci_init,
185     .class_init    = ich_ahci_class_init,
186     .interfaces = (InterfaceInfo[]) {
187         { INTERFACE_CONVENTIONAL_PCI_DEVICE },
188         { },
189     },
190 };
191 
192 static void ich_ahci_register_types(void)
193 {
194     type_register_static(&ich_ahci_info);
195 }
196 
197 type_init(ich_ahci_register_types)
198