1 /* 2 * QEMU IDE Emulation: PCI cmd646 support. 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * Copyright (c) 2006 Openedhand Ltd. 6 * 7 * Permission is hereby granted, free of charge, to any person obtaining a copy 8 * of this software and associated documentation files (the "Software"), to deal 9 * in the Software without restriction, including without limitation the rights 10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 11 * copies of the Software, and to permit persons to whom the Software is 12 * furnished to do so, subject to the following conditions: 13 * 14 * The above copyright notice and this permission notice shall be included in 15 * all copies or substantial portions of the Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 23 * THE SOFTWARE. 24 */ 25 26 #include "qemu/osdep.h" 27 #include "hw/pci/pci.h" 28 #include "hw/qdev-properties.h" 29 #include "migration/vmstate.h" 30 #include "qemu/module.h" 31 #include "hw/isa/isa.h" 32 #include "sysemu/dma.h" 33 #include "sysemu/reset.h" 34 35 #include "hw/ide/pci.h" 36 #include "ide-internal.h" 37 #include "trace.h" 38 39 /* CMD646 specific */ 40 #define CFR 0x50 41 #define CFR_INTR_CH0 0x04 42 #define CNTRL 0x51 43 #define CNTRL_EN_CH0 0x04 44 #define CNTRL_EN_CH1 0x08 45 #define ARTTIM23 0x57 46 #define ARTTIM23_INTR_CH1 0x10 47 #define MRDMODE 0x71 48 #define MRDMODE_INTR_CH0 0x04 49 #define MRDMODE_INTR_CH1 0x08 50 #define MRDMODE_BLK_CH0 0x10 51 #define MRDMODE_BLK_CH1 0x20 52 #define UDIDETCR0 0x73 53 #define UDIDETCR1 0x7B 54 55 static void cmd646_update_irq(PCIDevice *pd); 56 57 static void cmd646_update_dma_interrupts(PCIDevice *pd) 58 { 59 /* Sync DMA interrupt status from UDMA interrupt status */ 60 if (pd->config[MRDMODE] & MRDMODE_INTR_CH0) { 61 pd->config[CFR] |= CFR_INTR_CH0; 62 } else { 63 pd->config[CFR] &= ~CFR_INTR_CH0; 64 } 65 66 if (pd->config[MRDMODE] & MRDMODE_INTR_CH1) { 67 pd->config[ARTTIM23] |= ARTTIM23_INTR_CH1; 68 } else { 69 pd->config[ARTTIM23] &= ~ARTTIM23_INTR_CH1; 70 } 71 } 72 73 static void cmd646_update_udma_interrupts(PCIDevice *pd) 74 { 75 /* Sync UDMA interrupt status from DMA interrupt status */ 76 if (pd->config[CFR] & CFR_INTR_CH0) { 77 pd->config[MRDMODE] |= MRDMODE_INTR_CH0; 78 } else { 79 pd->config[MRDMODE] &= ~MRDMODE_INTR_CH0; 80 } 81 82 if (pd->config[ARTTIM23] & ARTTIM23_INTR_CH1) { 83 pd->config[MRDMODE] |= MRDMODE_INTR_CH1; 84 } else { 85 pd->config[MRDMODE] &= ~MRDMODE_INTR_CH1; 86 } 87 } 88 89 static uint64_t bmdma_read(void *opaque, hwaddr addr, 90 unsigned size) 91 { 92 BMDMAState *bm = opaque; 93 PCIDevice *pci_dev = PCI_DEVICE(bm->pci_dev); 94 uint32_t val; 95 96 if (size != 1) { 97 return ((uint64_t)1 << (size * 8)) - 1; 98 } 99 100 switch(addr & 3) { 101 case 0: 102 val = bm->cmd; 103 break; 104 case 1: 105 val = pci_dev->config[MRDMODE]; 106 break; 107 case 2: 108 val = bm->status; 109 break; 110 case 3: 111 if (bm == &bm->pci_dev->bmdma[0]) { 112 val = pci_dev->config[UDIDETCR0]; 113 } else { 114 val = pci_dev->config[UDIDETCR1]; 115 } 116 break; 117 default: 118 val = 0xff; 119 break; 120 } 121 122 trace_bmdma_read_cmd646(addr, val); 123 return val; 124 } 125 126 static void bmdma_write(void *opaque, hwaddr addr, 127 uint64_t val, unsigned size) 128 { 129 BMDMAState *bm = opaque; 130 PCIDevice *pci_dev = PCI_DEVICE(bm->pci_dev); 131 132 if (size != 1) { 133 return; 134 } 135 136 trace_bmdma_write_cmd646(addr, val); 137 switch(addr & 3) { 138 case 0: 139 bmdma_cmd_writeb(bm, val); 140 break; 141 case 1: 142 pci_dev->config[MRDMODE] = 143 (pci_dev->config[MRDMODE] & ~0x30) | (val & 0x30); 144 cmd646_update_dma_interrupts(pci_dev); 145 cmd646_update_irq(pci_dev); 146 break; 147 case 2: 148 bmdma_status_writeb(bm, val); 149 break; 150 case 3: 151 if (bm == &bm->pci_dev->bmdma[0]) { 152 pci_dev->config[UDIDETCR0] = val; 153 } else { 154 pci_dev->config[UDIDETCR1] = val; 155 } 156 break; 157 } 158 } 159 160 static const MemoryRegionOps cmd646_bmdma_ops = { 161 .read = bmdma_read, 162 .write = bmdma_write, 163 }; 164 165 static void bmdma_setup_bar(PCIIDEState *d) 166 { 167 BMDMAState *bm; 168 int i; 169 170 memory_region_init(&d->bmdma_bar, OBJECT(d), "cmd646-bmdma", 16); 171 for(i = 0;i < 2; i++) { 172 bm = &d->bmdma[i]; 173 memory_region_init_io(&bm->extra_io, OBJECT(d), &cmd646_bmdma_ops, bm, 174 "cmd646-bmdma-bus", 4); 175 memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io); 176 memory_region_init_io(&bm->addr_ioport, OBJECT(d), 177 &bmdma_addr_ioport_ops, bm, 178 "cmd646-bmdma-ioport", 4); 179 memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport); 180 } 181 } 182 183 static void cmd646_update_irq(PCIDevice *pd) 184 { 185 int pci_level; 186 187 pci_level = ((pd->config[MRDMODE] & MRDMODE_INTR_CH0) && 188 !(pd->config[MRDMODE] & MRDMODE_BLK_CH0)) || 189 ((pd->config[MRDMODE] & MRDMODE_INTR_CH1) && 190 !(pd->config[MRDMODE] & MRDMODE_BLK_CH1)); 191 pci_set_irq(pd, pci_level); 192 } 193 194 /* the PCI irq level is the logical OR of the two channels */ 195 static void cmd646_set_irq(void *opaque, int channel, int level) 196 { 197 PCIIDEState *d = opaque; 198 PCIDevice *pd = PCI_DEVICE(d); 199 int irq_mask; 200 201 irq_mask = MRDMODE_INTR_CH0 << channel; 202 if (level) { 203 pd->config[MRDMODE] |= irq_mask; 204 } else { 205 pd->config[MRDMODE] &= ~irq_mask; 206 } 207 cmd646_update_dma_interrupts(pd); 208 cmd646_update_irq(pd); 209 } 210 211 static void cmd646_reset(DeviceState *dev) 212 { 213 PCIIDEState *d = PCI_IDE(dev); 214 unsigned int i; 215 216 for (i = 0; i < 2; i++) { 217 ide_bus_reset(&d->bus[i]); 218 } 219 } 220 221 static uint32_t cmd646_pci_config_read(PCIDevice *d, 222 uint32_t address, int len) 223 { 224 return pci_default_read_config(d, address, len); 225 } 226 227 static void cmd646_pci_config_write(PCIDevice *d, uint32_t addr, uint32_t val, 228 int l) 229 { 230 uint32_t i; 231 232 pci_default_write_config(d, addr, val, l); 233 234 for (i = addr; i < addr + l; i++) { 235 switch (i) { 236 case CFR: 237 case ARTTIM23: 238 cmd646_update_udma_interrupts(d); 239 break; 240 case MRDMODE: 241 cmd646_update_dma_interrupts(d); 242 break; 243 } 244 } 245 246 cmd646_update_irq(d); 247 } 248 249 /* CMD646 PCI IDE controller */ 250 static void pci_cmd646_ide_realize(PCIDevice *dev, Error **errp) 251 { 252 PCIIDEState *d = PCI_IDE(dev); 253 DeviceState *ds = DEVICE(dev); 254 uint8_t *pci_conf = dev->config; 255 int i; 256 257 pci_conf[PCI_CLASS_PROG] = 0x8f; 258 259 pci_conf[CNTRL] = CNTRL_EN_CH0; // enable IDE0 260 if (d->secondary) { 261 /* XXX: if not enabled, really disable the secondary IDE controller */ 262 pci_conf[CNTRL] |= CNTRL_EN_CH1; /* enable IDE1 */ 263 } 264 265 /* Set write-to-clear interrupt bits */ 266 dev->wmask[CFR] = 0x0; 267 dev->w1cmask[CFR] = CFR_INTR_CH0; 268 dev->wmask[ARTTIM23] = 0x0; 269 dev->w1cmask[ARTTIM23] = ARTTIM23_INTR_CH1; 270 dev->wmask[MRDMODE] = 0x0; 271 dev->w1cmask[MRDMODE] = MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1; 272 273 memory_region_init_io(&d->data_bar[0], OBJECT(d), &pci_ide_data_le_ops, 274 &d->bus[0], "cmd646-data0", 8); 275 pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[0]); 276 277 memory_region_init_io(&d->cmd_bar[0], OBJECT(d), &pci_ide_cmd_le_ops, 278 &d->bus[0], "cmd646-cmd0", 4); 279 pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[0]); 280 281 memory_region_init_io(&d->data_bar[1], OBJECT(d), &pci_ide_data_le_ops, 282 &d->bus[1], "cmd646-data1", 8); 283 pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_IO, &d->data_bar[1]); 284 285 memory_region_init_io(&d->cmd_bar[1], OBJECT(d), &pci_ide_cmd_le_ops, 286 &d->bus[1], "cmd646-cmd1", 4); 287 pci_register_bar(dev, 3, PCI_BASE_ADDRESS_SPACE_IO, &d->cmd_bar[1]); 288 289 bmdma_setup_bar(d); 290 pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar); 291 292 /* TODO: RST# value should be 0 */ 293 pci_conf[PCI_INTERRUPT_PIN] = 0x01; // interrupt on pin 1 294 295 qdev_init_gpio_in(ds, cmd646_set_irq, 2); 296 for (i = 0; i < 2; i++) { 297 ide_bus_init(&d->bus[i], sizeof(d->bus[i]), ds, i, 2); 298 ide_bus_init_output_irq(&d->bus[i], qdev_get_gpio_in(ds, i)); 299 300 bmdma_init(&d->bus[i], &d->bmdma[i], d); 301 ide_bus_register_restart_cb(&d->bus[i]); 302 } 303 } 304 305 static void pci_cmd646_ide_exitfn(PCIDevice *dev) 306 { 307 PCIIDEState *d = PCI_IDE(dev); 308 unsigned i; 309 310 for (i = 0; i < 2; ++i) { 311 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io); 312 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport); 313 } 314 } 315 316 static Property cmd646_ide_properties[] = { 317 DEFINE_PROP_UINT32("secondary", PCIIDEState, secondary, 0), 318 DEFINE_PROP_END_OF_LIST(), 319 }; 320 321 static void cmd646_ide_class_init(ObjectClass *klass, void *data) 322 { 323 DeviceClass *dc = DEVICE_CLASS(klass); 324 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 325 326 device_class_set_legacy_reset(dc, cmd646_reset); 327 dc->vmsd = &vmstate_ide_pci; 328 k->realize = pci_cmd646_ide_realize; 329 k->exit = pci_cmd646_ide_exitfn; 330 k->vendor_id = PCI_VENDOR_ID_CMD; 331 k->device_id = PCI_DEVICE_ID_CMD_646; 332 k->revision = 0x07; 333 k->class_id = PCI_CLASS_STORAGE_IDE; 334 k->config_read = cmd646_pci_config_read; 335 k->config_write = cmd646_pci_config_write; 336 device_class_set_props(dc, cmd646_ide_properties); 337 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 338 } 339 340 static const TypeInfo cmd646_ide_info = { 341 .name = "cmd646-ide", 342 .parent = TYPE_PCI_IDE, 343 .class_init = cmd646_ide_class_init, 344 }; 345 346 static void cmd646_ide_register_types(void) 347 { 348 type_register_static(&cmd646_ide_info); 349 } 350 351 type_init(cmd646_ide_register_types) 352